Add a triple to switch.ll test.
[oota-llvm.git] / test / CodeGen / X86 / vselect-avx.ll
1 ; RUN: llc %s -o - -mattr=+avx | FileCheck %s
2 target datalayout = "e-m:o-i64:64-f80:128-n8:16:32:64-S128"
3 target triple = "x86_64-apple-macosx"
4
5 ; For this test we used to optimize the <i1 true, i1 false, i1 false, i1 true>
6 ; mask into <i32 2147483648, i32 0, i32 0, i32 2147483648> because we thought
7 ; we would lower that into a blend where only the high bit is relevant.
8 ; However, since the whole mask is constant, this is simplified incorrectly
9 ; by the generic code, because it was expecting -1 in place of 2147483648.
10
11 ; The problem does not occur without AVX, because vselect of v4i32 is not legal
12 ; nor custom.
13 ;
14 ; <rdar://problem/18675020>
15
16 ; CHECK-LABEL: test:
17 ; CHECK: vmovdqa {{.*#+}} xmm0 = [65535,0,0,65535]
18 ; CHECK: vmovdqa {{.*#+}} xmm2 = [65533,124,125,14807]
19 ; CHECK: ret
20 define void @test(<4 x i16>* %a, <4 x i16>* %b) {
21 body:
22   %predphi = select <4 x i1> <i1 true, i1 false, i1 false, i1 true>, <4 x i16> <i16 -3, i16 545, i16 4385, i16 14807>, <4 x i16> <i16 123, i16 124, i16 125, i16 127>
23   %predphi42 = select <4 x i1> <i1 true, i1 false, i1 false, i1 true>, <4 x i16> <i16 -1, i16 -1, i16 -1, i16 -1>, <4 x i16> zeroinitializer
24   store <4 x i16> %predphi, <4 x i16>* %a, align 8
25   store <4 x i16> %predphi42, <4 x i16>* %b, align 8
26   ret void
27 }
28
29 ; Improve code coverage.
30 ;
31 ; When shrinking the condition used into the select to match a blend, this
32 ; test case exercises the path where the modified node is not the root
33 ; of the condition.
34 ;
35 ; CHECK-LABEL: test2:
36 ; CHECK:        vpslld  $31, %xmm0, %xmm0
37 ; CHECK-NEXT:   vpmovsxdq       %xmm0, %xmm1
38 ; CHECK-NEXT:   vpshufd $78, %xmm0, %xmm0       ## xmm0 = xmm0[2,3,0,1]
39 ; CHECK-NEXT:   vpmovsxdq       %xmm0, %xmm0
40 ; CHECK-NEXT:   vinsertf128     $1, %xmm0, %ymm1, [[MASK:%ymm[0-9]+]]
41 ; CHECK: vblendvpd      [[MASK]]
42 ; CHECK: retq
43 define void @test2(double** %call1559, i64 %indvars.iv4198, <4 x i1> %tmp1895) {
44 bb:
45   %arrayidx1928 = getelementptr inbounds double*, double** %call1559, i64 %indvars.iv4198
46   %tmp1888 = load double*, double** %arrayidx1928, align 8
47   %predphi.v.v = select <4 x i1> %tmp1895, <4 x double> <double -5.000000e-01, double -5.000000e-01, double -5.000000e-01, double -5.000000e-01>, <4 x double> <double 5.000000e-01, double 5.000000e-01, double 5.000000e-01, double 5.000000e-01>
48   %tmp1900 = bitcast double* %tmp1888 to <4 x double>*
49   store <4 x double> %predphi.v.v, <4 x double>* %tmp1900, align 8
50   ret void
51 }
52
53 ; For this test, we used to optimized the conditional mask for the blend, i.e.,
54 ; we shrunk some of its bits.
55 ; However, this same mask was used in another select (%predphi31) that turned out
56 ; to be optimized into a and. In that case, the conditional mask was wrong.
57 ;
58 ; Make sure that the and is fed by the original mask.
59
60 ; <rdar://problem/18819506>
61
62 ; CHECK-LABEL: test3:
63 ; Compute the mask.
64 ;       CHECK: vpcmpeqd {{%xmm[0-9]+}}, {{%xmm[0-9]+}}, [[MASK:%xmm[0-9]+]]
65 ; Do not shrink the bit of the mask.
66 ; CHECK-NOT: vpslld     $31, [[MASK]], {{%xmm[0-9]+}}
67 ; Use the mask in the blend.
68 ; CHECK-NEXT:   vblendvps       [[MASK]], %xmm{{[0-9]+}}, %xmm{{[0-9]+}}, %xmm{{[0-9]+}}
69 ; Use the mask in the and.
70 ; CHECK-NEXT: vpand LCPI2_2(%rip), [[MASK]], {{%xmm[0-9]+}} 
71 ; CHECK: retq
72 define void @test3(<4 x i32> %induction30, <4 x i16>* %tmp16, <4 x i16>* %tmp17,  <4 x i16> %tmp3, <4 x i16> %tmp12) {
73   %tmp6 = srem <4 x i32> %induction30, <i32 3, i32 3, i32 3, i32 3>
74   %tmp7 = icmp eq <4 x i32> %tmp6, zeroinitializer
75   %predphi = select <4 x i1> %tmp7, <4 x i16> %tmp3, <4 x i16> %tmp12
76   %predphi31 = select <4 x i1> %tmp7, <4 x i16> <i16 -1, i16 -1, i16 -1, i16 -1>, <4 x i16> zeroinitializer
77
78   store <4 x i16> %predphi31, <4 x i16>* %tmp16, align 8
79   store <4 x i16> %predphi, <4 x i16>* %tmp17, align 8
80  ret void
81 }
82
83 ; We shouldn't try to lower this directly using VSELECT because we don't have
84 ; vpblendvb in AVX1, only in AVX2. Instead, it should be expanded.
85 ;
86 ; CHECK-LABEL: PR22706:
87 ; CHECK: vpcmpgtb
88 ; CHECK: vpcmpgtb
89 define <32 x i8> @PR22706(<32 x i1> %x) {
90   %tmp = select <32 x i1> %x, <32 x i8> <i8 1, i8 1, i8 1, i8 1, i8 1, i8 1, i8 1, i8 1, i8 1, i8 1, i8 1, i8 1, i8 1, i8 1, i8 1, i8 1, i8 1, i8 1, i8 1, i8 1, i8 1, i8 1, i8 1, i8 1, i8 1, i8 1, i8 1, i8 1, i8 1, i8 1, i8 1, i8 1>, <32 x i8> <i8 2, i8 2, i8 2, i8 2, i8 2, i8 2, i8 2, i8 2, i8 2, i8 2, i8 2, i8 2, i8 2, i8 2, i8 2, i8 2, i8 2, i8 2, i8 2, i8 2, i8 2, i8 2, i8 2, i8 2, i8 2, i8 2, i8 2, i8 2, i8 2, i8 2, i8 2, i8 2>
91   ret <32 x i8> %tmp
92 }