// XformMskToBitPosU5Imm - Returns the bit position which
// the single bit 32 bit mask represents.
// Used in Clr and Set bit immediate memops.
- SDValue XformMskToBitPosU5Imm(uint32_t Imm) {
+ SDValue XformMskToBitPosU5Imm(uint32_t Imm, SDLoc DL) {
int32_t bitPos;
bitPos = Log2_32(Imm);
assert(bitPos >= 0 && bitPos < 32 &&
"Constant out of range for 32 BitPos Memops");
- return CurDAG->getTargetConstant(bitPos, MVT::i32);
+ return CurDAG->getTargetConstant(bitPos, DL, MVT::i32);
}
// XformMskToBitPosU4Imm - Returns the bit position which the single-bit
// 16 bit mask represents. Used in Clr and Set bit immediate memops.
- SDValue XformMskToBitPosU4Imm(uint16_t Imm) {
- return XformMskToBitPosU5Imm(Imm);
+ SDValue XformMskToBitPosU4Imm(uint16_t Imm, SDLoc DL) {
+ return XformMskToBitPosU5Imm(Imm, DL);
}
// XformMskToBitPosU3Imm - Returns the bit position which the single-bit
// 8 bit mask represents. Used in Clr and Set bit immediate memops.
- SDValue XformMskToBitPosU3Imm(uint8_t Imm) {
- return XformMskToBitPosU5Imm(Imm);
+ SDValue XformMskToBitPosU3Imm(uint8_t Imm, SDLoc DL) {
+ return XformMskToBitPosU5Imm(Imm, DL);
}
// Return true if there is exactly one bit set in V, i.e., if V is one of the
// XformM5ToU5Imm - Return a target constant with the specified value, of
// type i32 where the negative literal is transformed into a positive literal
// for use in -= memops.
- inline SDValue XformM5ToU5Imm(signed Imm) {
+ inline SDValue XformM5ToU5Imm(signed Imm, SDLoc DL) {
assert( (Imm >= -31 && Imm <= -1) && "Constant out of range for Memops");
- return CurDAG->getTargetConstant( - Imm, MVT::i32);
+ return CurDAG->getTargetConstant( - Imm, DL, MVT::i32);
}
// XformU7ToU7M1Imm - Return a target constant decremented by 1, in range
// [1..128], used in cmpb.gtu instructions.
- inline SDValue XformU7ToU7M1Imm(signed Imm) {
+ inline SDValue XformU7ToU7M1Imm(signed Imm, SDLoc DL) {
assert((Imm >= 1 && Imm <= 128) && "Constant out of range for cmpb op");
- return CurDAG->getTargetConstant(Imm - 1, MVT::i8);
+ return CurDAG->getTargetConstant(Imm - 1, DL, MVT::i8);
}
// XformS8ToS8M1Imm - Return a target constant decremented by 1.
- inline SDValue XformSToSM1Imm(signed Imm) {
- return CurDAG->getTargetConstant(Imm - 1, MVT::i32);
+ inline SDValue XformSToSM1Imm(signed Imm, SDLoc DL) {
+ return CurDAG->getTargetConstant(Imm - 1, DL, MVT::i32);
}
// XformU8ToU8M1Imm - Return a target constant decremented by 1.
- inline SDValue XformUToUM1Imm(unsigned Imm) {
+ inline SDValue XformUToUM1Imm(unsigned Imm, SDLoc DL) {
assert((Imm >= 1) && "Cannot decrement unsigned int less than 1");
- return CurDAG->getTargetConstant(Imm - 1, MVT::i32);
+ return CurDAG->getTargetConstant(Imm - 1, DL, MVT::i32);
}
// XformSToSM2Imm - Return a target constant decremented by 2.
- inline SDValue XformSToSM2Imm(unsigned Imm) {
- return CurDAG->getTargetConstant(Imm - 2, MVT::i32);
+ inline SDValue XformSToSM2Imm(unsigned Imm, SDLoc DL) {
+ return CurDAG->getTargetConstant(Imm - 2, DL, MVT::i32);
}
// XformSToSM3Imm - Return a target constant decremented by 3.
- inline SDValue XformSToSM3Imm(unsigned Imm) {
- return CurDAG->getTargetConstant(Imm - 3, MVT::i32);
+ inline SDValue XformSToSM3Imm(unsigned Imm, SDLoc DL) {
+ return CurDAG->getTargetConstant(Imm - 3, DL, MVT::i32);
}
// Include the pieces autogenerated from the target description.
const HexagonInstrInfo &TII = *HST->getInstrInfo();
if (TII.isValidAutoIncImm(LoadedVT, Val)) {
- SDValue TargetConst = CurDAG->getTargetConstant(Val, MVT::i32);
+ SDValue TargetConst = CurDAG->getTargetConstant(Val, dl, MVT::i32);
SDNode *Result_1 = CurDAG->getMachineNode(Opcode, dl, MVT::i32, MVT::i32,
MVT::Other, Base, TargetConst,
Chain);
return Result_2;
}
- SDValue TargetConst0 = CurDAG->getTargetConstant(0, MVT::i32);
- SDValue TargetConstVal = CurDAG->getTargetConstant(Val, MVT::i32);
+ SDValue TargetConst0 = CurDAG->getTargetConstant(0, dl, MVT::i32);
+ SDValue TargetConstVal = CurDAG->getTargetConstant(Val, dl, MVT::i32);
SDNode *Result_1 = CurDAG->getMachineNode(Opcode, dl, MVT::i32, MVT::Other,
Base, TargetConst0, Chain);
SDNode *Result_2 = CurDAG->getMachineNode(Hexagon::A2_sxtw, dl, MVT::i64,
const HexagonInstrInfo &TII = *HST->getInstrInfo();
if (TII.isValidAutoIncImm(LoadedVT, Val)) {
- SDValue TargetConstVal = CurDAG->getTargetConstant(Val, MVT::i32);
- SDValue TargetConst0 = CurDAG->getTargetConstant(0, MVT::i32);
+ SDValue TargetConstVal = CurDAG->getTargetConstant(Val, dl, MVT::i32);
+ SDValue TargetConst0 = CurDAG->getTargetConstant(0, dl, MVT::i32);
SDNode *Result_1 = CurDAG->getMachineNode(Opcode, dl, MVT::i32,
MVT::i32, MVT::Other, Base,
TargetConstVal, Chain);
}
// Generate an indirect load.
- SDValue TargetConst0 = CurDAG->getTargetConstant(0, MVT::i32);
- SDValue TargetConstVal = CurDAG->getTargetConstant(Val, MVT::i32);
+ SDValue TargetConst0 = CurDAG->getTargetConstant(0, dl, MVT::i32);
+ SDValue TargetConstVal = CurDAG->getTargetConstant(Val, dl, MVT::i32);
SDNode *Result_1 = CurDAG->getMachineNode(Opcode, dl, MVT::i32,
MVT::Other, Base, TargetConst0,
Chain);
return SelectIndexedLoadSignExtend64(LD, Opcode, dl);
if (TII.isValidAutoIncImm(LoadedVT, Val)) {
- SDValue TargetConstVal = CurDAG->getTargetConstant(Val, MVT::i32);
+ SDValue TargetConstVal = CurDAG->getTargetConstant(Val, dl, MVT::i32);
SDNode* Result = CurDAG->getMachineNode(Opcode, dl,
LD->getValueType(0),
MVT::i32, MVT::Other, Base,
ReplaceUses(Froms, Tos, 3);
return Result;
} else {
- SDValue TargetConst0 = CurDAG->getTargetConstant(0, MVT::i32);
- SDValue TargetConstVal = CurDAG->getTargetConstant(Val, MVT::i32);
+ SDValue TargetConst0 = CurDAG->getTargetConstant(0, dl, MVT::i32);
+ SDValue TargetConstVal = CurDAG->getTargetConstant(Val, dl, MVT::i32);
SDNode* Result_1 = CurDAG->getMachineNode(Opcode, dl,
LD->getValueType(0),
MVT::Other, Base, TargetConst0,
Value = CurDAG->getTargetExtractSubreg(Hexagon::subreg_loreg,
dl, MVT::i32, Value);
}
- SDValue Ops[] = {Base, CurDAG->getTargetConstant(Val, MVT::i32), Value,
+ SDValue Ops[] = {Base, CurDAG->getTargetConstant(Val, dl, MVT::i32), Value,
Chain};
// Build post increment store.
SDNode* Result = CurDAG->getMachineNode(Opcode, dl, MVT::i32,
// def S2_storerd_io
// : STInst<(outs), (ins IntRegs:$base, imm:$offset, DoubleRegs:$src1), ...
// and it differs for POST_ST* for instance.
- SDValue Ops[] = { Base, CurDAG->getTargetConstant(0, MVT::i32), Value,
+ SDValue Ops[] = { Base, CurDAG->getTargetConstant(0, dl, MVT::i32), Value,
Chain};
unsigned Opcode = 0;
else llvm_unreachable("unknown memory type");
// Build regular store.
- SDValue TargetConstVal = CurDAG->getTargetConstant(Val, MVT::i32);
+ SDValue TargetConstVal = CurDAG->getTargetConstant(Val, dl, MVT::i32);
SDNode* Result_1 = CurDAG->getMachineNode(Opcode, dl, MVT::Other, Ops);
// Build splitted incriment instruction.
SDNode* Result_2 = CurDAG->getMachineNode(Hexagon::A2_addi, dl, MVT::i32,
}
SDValue Chain = LD->getChain();
- SDValue TargetConst0 = CurDAG->getTargetConstant(0, MVT::i32);
+ SDValue TargetConst0 = CurDAG->getTargetConstant(0, dl, MVT::i32);
OP0 = SDValue(CurDAG->getMachineNode(Hexagon::L2_loadri_io, dl, MVT::i32,
MVT::Other,
LD->getBasePtr(), TargetConst0,
}
SDValue Chain = LD->getChain();
- SDValue TargetConst0 = CurDAG->getTargetConstant(0, MVT::i32);
+ SDValue TargetConst0 = CurDAG->getTargetConstant(0, dl, MVT::i32);
OP1 = SDValue(CurDAG->getMachineNode(Hexagon::L2_loadri_io, dl, MVT::i32,
MVT::Other,
LD->getBasePtr(), TargetConst0,
int32_t MulConst =
cast<ConstantSDNode>(Mul_1.getNode())->getSExtValue();
int32_t ValConst = MulConst << ShlConst;
- SDValue Val = CurDAG->getTargetConstant(ValConst,
+ SDValue Val = CurDAG->getTargetConstant(ValConst, dl,
MVT::i32);
if (ConstantSDNode *CN = dyn_cast<ConstantSDNode>(Val.getNode()))
if (isInt<9>(CN->getSExtValue())) {
int32_t Shl2Const =
cast<ConstantSDNode>(Shl2_1.getNode())->getSExtValue();
int32_t ValConst = 1 << (ShlConst+Shl2Const);
- SDValue Val = CurDAG->getTargetConstant(-ValConst, MVT::i32);
+ SDValue Val = CurDAG->getTargetConstant(-ValConst, dl,
+ MVT::i32);
if (ConstantSDNode *CN =
dyn_cast<ConstantSDNode>(Val.getNode()))
if (isInt<9>(CN->getSExtValue())) {
MV |= Bit;
Bit <<= ES;
}
- SDValue Ones = CurDAG->getTargetConstant(MV, MVT::i64);
+ SDValue Ones = CurDAG->getTargetConstant(MV, dl, MVT::i64);
SDNode *OnesReg = CurDAG->getMachineNode(Hexagon::CONST64_Int_Real, dl,
MVT::i64, Ones);
if (ExVT.getSizeInBits() == 32) {
SDNode *And = CurDAG->getMachineNode(Hexagon::A2_andp, dl, MVT::i64,
SDValue(Mask,0), SDValue(OnesReg,0));
- SDValue SubR = CurDAG->getTargetConstant(Hexagon::subreg_loreg, MVT::i32);
+ SDValue SubR = CurDAG->getTargetConstant(Hexagon::subreg_loreg, dl,
+ MVT::i32);
return CurDAG->getMachineNode(Hexagon::EXTRACT_SUBREG, dl, ExVT,
SDValue(And,0), SubR);
}
// Now we need to differentiate target data types.
if (N->getValueType(0) == MVT::i64) {
// Convert the zero_extend to Rs = Pd followed by A2_combinew(0,Rs).
- SDValue TargetConst0 = CurDAG->getTargetConstant(0, MVT::i32);
+ SDValue TargetConst0 = CurDAG->getTargetConstant(0, dl, MVT::i32);
SDNode *Result_1 = CurDAG->getMachineNode(Hexagon::C2_tfrpr, dl,
MVT::i32,
SDValue(IsIntrinsic, 0));
Ops.push_back(Load);
Ops.push_back(ModifierExpr);
int32_t Val = cast<ConstantSDNode>(Offset.getNode())->getSExtValue();
- Ops.push_back(CurDAG->getTargetConstant(Val, MVT::i32));
+ Ops.push_back(CurDAG->getTargetConstant(Val, dl, MVT::i32));
Ops.push_back(Chain);
SDNode* Result = CurDAG->getMachineNode(opc, dl, ResTys, Ops);
APFloat APF = CN->getValueAPF();
if (N->getValueType(0) == MVT::f32) {
return CurDAG->getMachineNode(Hexagon::TFRI_f, dl, MVT::f32,
- CurDAG->getTargetConstantFP(APF.convertToFloat(), MVT::f32));
+ CurDAG->getTargetConstantFP(APF.convertToFloat(), dl, MVT::f32));
}
else if (N->getValueType(0) == MVT::f64) {
return CurDAG->getMachineNode(Hexagon::CONST64_Float_Real, dl, MVT::f64,
- CurDAG->getTargetConstantFP(APF.convertToDouble(), MVT::f64));
+ CurDAG->getTargetConstantFP(APF.convertToDouble(), dl, MVT::f64));
}
return SelectCode(N);
SDNode *Result;
// Get the right SDVal for the opcode.
- SDValue SDVal = CurDAG->getTargetConstant(bitpos, MVT::i32);
+ SDValue SDVal = CurDAG->getTargetConstant(bitpos, dl, MVT::i32);
if (ValueVT == MVT::i32 || ValueVT == MVT::f32) {
Result = CurDAG->getMachineNode(BitOpc, dl, ValueVT,
SDNode *Reg = N->getOperand(0).getNode();
SDValue RegClass = CurDAG->getTargetConstant(Hexagon::DoubleRegsRegClassID,
- MVT::i64);
+ dl, MVT::i64);
- SDValue SubregHiIdx = CurDAG->getTargetConstant(Hexagon::subreg_hireg,
+ SDValue SubregHiIdx = CurDAG->getTargetConstant(Hexagon::subreg_hireg, dl,
MVT::i32);
- SDValue SubregLoIdx = CurDAG->getTargetConstant(Hexagon::subreg_loreg,
+ SDValue SubregLoIdx = CurDAG->getTargetConstant(Hexagon::subreg_loreg, dl,
MVT::i32);
SDValue SubregHI = CurDAG->getTargetExtractSubreg(Hexagon::subreg_hireg, dl,
dl, ValueVT, Ops);
} else {
if (Opc != ISD::FABS && Opc != ISD::FNEG)
- SDVal = CurDAG->getTargetConstant(bitpos-32, MVT::i32);
+ SDVal = CurDAG->getTargetConstant(bitpos - 32, dl, MVT::i32);
SDNode *Result0 = CurDAG->getMachineNode(BitOpc, dl, SubValueVT,
SubregHI, SDVal);
const SDValue Ops[] = { RegClass, SDValue(Result0, 0), SubregHiIdx,
unsigned StkA = HFI->getStackAlignment();
unsigned MaxA = MFI->getMaxAlignment();
SDValue FI = CurDAG->getTargetFrameIndex(FX, MVT::i32);
- SDValue Zero = CurDAG->getTargetConstant(0, MVT::i32);
SDLoc DL(N);
+ SDValue Zero = CurDAG->getTargetConstant(0, DL, MVT::i32);
SDNode *R = 0;
// Use TFR_FI when:
break;
}
- OutOps.push_back(CurDAG->getTargetConstant(0, MVT::i32));
+ OutOps.push_back(CurDAG->getTargetConstant(0, SDLoc(Op), MVT::i32));
return false;
}
projects / oota-llvm.git / blobdiff