Silence unused variable warnings.
[oota-llvm.git] / lib / CodeGen / LiveVariables.cpp
1 //===-- LiveVariables.cpp - Live Variable Analysis for Machine Code -------===//
2 //
3 //                     The LLVM Compiler Infrastructure
4 //
5 // This file is distributed under the University of Illinois Open Source
6 // License. See LICENSE.TXT for details.
7 //
8 //===----------------------------------------------------------------------===//
9 //
10 // This file implements the LiveVariable analysis pass.  For each machine
11 // instruction in the function, this pass calculates the set of registers that
12 // are immediately dead after the instruction (i.e., the instruction calculates
13 // the value, but it is never used) and the set of registers that are used by
14 // the instruction, but are never used after the instruction (i.e., they are
15 // killed).
16 //
17 // This class computes live variables using are sparse implementation based on
18 // the machine code SSA form.  This class computes live variable information for
19 // each virtual and _register allocatable_ physical register in a function.  It
20 // uses the dominance properties of SSA form to efficiently compute live
21 // variables for virtual registers, and assumes that physical registers are only
22 // live within a single basic block (allowing it to do a single local analysis
23 // to resolve physical register lifetimes in each basic block).  If a physical
24 // register is not register allocatable, it is not tracked.  This is useful for
25 // things like the stack pointer and condition codes.
26 //
27 //===----------------------------------------------------------------------===//
28
29 #include "llvm/CodeGen/LiveVariables.h"
30 #include "llvm/CodeGen/MachineInstr.h"
31 #include "llvm/CodeGen/MachineRegisterInfo.h"
32 #include "llvm/CodeGen/Passes.h"
33 #include "llvm/Target/TargetRegisterInfo.h"
34 #include "llvm/Target/TargetInstrInfo.h"
35 #include "llvm/Target/TargetMachine.h"
36 #include "llvm/ADT/DepthFirstIterator.h"
37 #include "llvm/ADT/SmallPtrSet.h"
38 #include "llvm/ADT/SmallSet.h"
39 #include "llvm/ADT/STLExtras.h"
40 #include "llvm/Config/alloca.h"
41 #include <algorithm>
42 using namespace llvm;
43
44 char LiveVariables::ID = 0;
45 static RegisterPass<LiveVariables> X("livevars", "Live Variable Analysis");
46
47
48 void LiveVariables::getAnalysisUsage(AnalysisUsage &AU) const {
49   AU.addRequiredID(UnreachableMachineBlockElimID);
50   AU.setPreservesAll();
51 }
52
53 void LiveVariables::VarInfo::dump() const {
54   cerr << "  Alive in blocks: ";
55   for (int i = AliveBlocks.find_first(); i != -1; i = AliveBlocks.find_next(i))
56     cerr << i << ", ";
57   cerr << "  Used in blocks: ";
58   for (int i = UsedBlocks.find_first(); i != -1; i = UsedBlocks.find_next(i))
59     cerr << i << ", ";
60   cerr << "\n  Killed by:";
61   if (Kills.empty())
62     cerr << " No instructions.\n";
63   else {
64     for (unsigned i = 0, e = Kills.size(); i != e; ++i)
65       cerr << "\n    #" << i << ": " << *Kills[i];
66     cerr << "\n";
67   }
68 }
69
70 /// getVarInfo - Get (possibly creating) a VarInfo object for the given vreg.
71 LiveVariables::VarInfo &LiveVariables::getVarInfo(unsigned RegIdx) {
72   assert(TargetRegisterInfo::isVirtualRegister(RegIdx) &&
73          "getVarInfo: not a virtual register!");
74   RegIdx -= TargetRegisterInfo::FirstVirtualRegister;
75   if (RegIdx >= VirtRegInfo.size()) {
76     if (RegIdx >= 2*VirtRegInfo.size())
77       VirtRegInfo.resize(RegIdx*2);
78     else
79       VirtRegInfo.resize(2*VirtRegInfo.size());
80   }
81   VarInfo &VI = VirtRegInfo[RegIdx];
82   VI.AliveBlocks.resize(MF->getNumBlockIDs());
83   VI.UsedBlocks.resize(MF->getNumBlockIDs());
84   return VI;
85 }
86
87 void LiveVariables::MarkVirtRegAliveInBlock(VarInfo& VRInfo,
88                                             MachineBasicBlock *DefBlock,
89                                             MachineBasicBlock *MBB,
90                                     std::vector<MachineBasicBlock*> &WorkList) {
91   unsigned BBNum = MBB->getNumber();
92   
93   // Check to see if this basic block is one of the killing blocks.  If so,
94   // remove it.
95   for (unsigned i = 0, e = VRInfo.Kills.size(); i != e; ++i)
96     if (VRInfo.Kills[i]->getParent() == MBB) {
97       VRInfo.Kills.erase(VRInfo.Kills.begin()+i);  // Erase entry
98       break;
99     }
100   
101   if (MBB == DefBlock) return;  // Terminate recursion
102
103   if (VRInfo.AliveBlocks[BBNum])
104     return;  // We already know the block is live
105
106   // Mark the variable known alive in this bb
107   VRInfo.AliveBlocks[BBNum] = true;
108
109   for (MachineBasicBlock::const_pred_reverse_iterator PI = MBB->pred_rbegin(),
110          E = MBB->pred_rend(); PI != E; ++PI)
111     WorkList.push_back(*PI);
112 }
113
114 void LiveVariables::MarkVirtRegAliveInBlock(VarInfo &VRInfo,
115                                             MachineBasicBlock *DefBlock,
116                                             MachineBasicBlock *MBB) {
117   std::vector<MachineBasicBlock*> WorkList;
118   MarkVirtRegAliveInBlock(VRInfo, DefBlock, MBB, WorkList);
119
120   while (!WorkList.empty()) {
121     MachineBasicBlock *Pred = WorkList.back();
122     WorkList.pop_back();
123     MarkVirtRegAliveInBlock(VRInfo, DefBlock, Pred, WorkList);
124   }
125 }
126
127 void LiveVariables::HandleVirtRegUse(unsigned reg, MachineBasicBlock *MBB,
128                                      MachineInstr *MI) {
129   assert(MRI->getVRegDef(reg) && "Register use before def!");
130
131   unsigned BBNum = MBB->getNumber();
132
133   VarInfo& VRInfo = getVarInfo(reg);
134   VRInfo.UsedBlocks[BBNum] = true;
135   VRInfo.NumUses++;
136
137   // Check to see if this basic block is already a kill block.
138   if (!VRInfo.Kills.empty() && VRInfo.Kills.back()->getParent() == MBB) {
139     // Yes, this register is killed in this basic block already. Increase the
140     // live range by updating the kill instruction.
141     VRInfo.Kills.back() = MI;
142     return;
143   }
144
145 #ifndef NDEBUG
146   for (unsigned i = 0, e = VRInfo.Kills.size(); i != e; ++i)
147     assert(VRInfo.Kills[i]->getParent() != MBB && "entry should be at end!");
148 #endif
149
150   // This situation can occur:
151   //
152   //     ,------.
153   //     |      |
154   //     |      v
155   //     |   t2 = phi ... t1 ...
156   //     |      |
157   //     |      v
158   //     |   t1 = ...
159   //     |  ... = ... t1 ...
160   //     |      |
161   //     `------'
162   //
163   // where there is a use in a PHI node that's a predecessor to the defining
164   // block. We don't want to mark all predecessors as having the value "alive"
165   // in this case.
166   if (MBB == MRI->getVRegDef(reg)->getParent()) return;
167
168   // Add a new kill entry for this basic block. If this virtual register is
169   // already marked as alive in this basic block, that means it is alive in at
170   // least one of the successor blocks, it's not a kill.
171   if (!VRInfo.AliveBlocks[BBNum])
172     VRInfo.Kills.push_back(MI);
173
174   // Update all dominating blocks to mark them as "known live".
175   for (MachineBasicBlock::const_pred_iterator PI = MBB->pred_begin(),
176          E = MBB->pred_end(); PI != E; ++PI)
177     MarkVirtRegAliveInBlock(VRInfo, MRI->getVRegDef(reg)->getParent(), *PI);
178 }
179
180 void LiveVariables::HandleVirtRegDef(unsigned Reg, MachineInstr *MI) {
181   VarInfo &VRInfo = getVarInfo(Reg);
182
183   if (VRInfo.AliveBlocks.none())
184     // If vr is not alive in any block, then defaults to dead.
185     VRInfo.Kills.push_back(MI);
186 }
187
188 /// FindLastPartialDef - Return the last partial def of the specified register.
189 /// Also returns the sub-register that's defined.
190 MachineInstr *LiveVariables::FindLastPartialDef(unsigned Reg,
191                                                 unsigned &PartDefReg) {
192   unsigned LastDefReg = 0;
193   unsigned LastDefDist = 0;
194   MachineInstr *LastDef = NULL;
195   for (const unsigned *SubRegs = TRI->getSubRegisters(Reg);
196        unsigned SubReg = *SubRegs; ++SubRegs) {
197     MachineInstr *Def = PhysRegDef[SubReg];
198     if (!Def)
199       continue;
200     unsigned Dist = DistanceMap[Def];
201     if (Dist > LastDefDist) {
202       LastDefReg  = SubReg;
203       LastDef     = Def;
204       LastDefDist = Dist;
205     }
206   }
207   PartDefReg = LastDefReg;
208   return LastDef;
209 }
210
211 /// HandlePhysRegUse - Turn previous partial def's into read/mod/writes. Add
212 /// implicit defs to a machine instruction if there was an earlier def of its
213 /// super-register.
214 void LiveVariables::HandlePhysRegUse(unsigned Reg, MachineInstr *MI) {
215   // If there was a previous use or a "full" def all is well.
216   if (!PhysRegDef[Reg] && !PhysRegUse[Reg]) {
217     // Otherwise, the last sub-register def implicitly defines this register.
218     // e.g.
219     // AH =
220     // AL = ... <imp-def EAX>, <imp-kill AH>
221     //    = AH
222     // ...
223     //    = EAX
224     // All of the sub-registers must have been defined before the use of Reg!
225     unsigned PartDefReg = 0;
226     MachineInstr *LastPartialDef = FindLastPartialDef(Reg, PartDefReg);
227     // If LastPartialDef is NULL, it must be using a livein register.
228     if (LastPartialDef) {
229       LastPartialDef->addOperand(MachineOperand::CreateReg(Reg, true/*IsDef*/,
230                                                            true/*IsImp*/));
231       PhysRegDef[Reg] = LastPartialDef;
232       SmallSet<unsigned, 8> Processed;
233       for (const unsigned *SubRegs = TRI->getSubRegisters(Reg);
234            unsigned SubReg = *SubRegs; ++SubRegs) {
235         if (Processed.count(SubReg))
236           continue;
237         if (SubReg == PartDefReg || TRI->isSubRegister(PartDefReg, SubReg))
238           continue;
239         // This part of Reg was defined before the last partial def. It's killed
240         // here.
241         LastPartialDef->addOperand(MachineOperand::CreateReg(SubReg,
242                                                              false/*IsDef*/,
243                                                              true/*IsImp*/));
244         PhysRegDef[SubReg] = LastPartialDef;
245         for (const unsigned *SS = TRI->getSubRegisters(SubReg); *SS; ++SS)
246           Processed.insert(*SS);
247       }
248     }
249   }
250
251   // There was an earlier def of a super-register. Add implicit def to that MI.
252   //
253   //   A: EAX = ...
254   //   B: ... = AX
255   //
256   // Add implicit def to A if there isn't a use of AX (or EAX) before B.
257   if (!PhysRegUse[Reg]) {
258     MachineInstr *Def = PhysRegDef[Reg];
259     if (Def && !Def->modifiesRegister(Reg))
260       Def->addOperand(MachineOperand::CreateReg(Reg,
261                                                 true  /*IsDef*/,
262                                                 true  /*IsImp*/));
263   }
264   
265   // Remember this use.
266   PhysRegUse[Reg]  = MI;
267   for (const unsigned *SubRegs = TRI->getSubRegisters(Reg);
268        unsigned SubReg = *SubRegs; ++SubRegs)
269     PhysRegUse[SubReg] =  MI;
270 }
271
272 /// hasRegisterUseBelow - Return true if the specified register is used after
273 /// the current instruction and before it's next definition.
274 bool LiveVariables::hasRegisterUseBelow(unsigned Reg,
275                                         MachineBasicBlock::iterator I,
276                                         MachineBasicBlock *MBB) {
277   if (I == MBB->end())
278     return false;
279
280   // First find out if there are any uses / defs below.
281   bool hasDistInfo = true;
282   unsigned CurDist = DistanceMap[I];
283   SmallVector<MachineInstr*, 4> Uses;
284   SmallVector<MachineInstr*, 4> Defs;
285   for (MachineRegisterInfo::reg_iterator RI = MRI->reg_begin(Reg),
286          RE = MRI->reg_end(); RI != RE; ++RI) {
287     MachineOperand &UDO = RI.getOperand();
288     MachineInstr *UDMI = &*RI;
289     if (UDMI->getParent() != MBB)
290       continue;
291     DenseMap<MachineInstr*, unsigned>::iterator DI = DistanceMap.find(UDMI);
292     bool isBelow = false;
293     if (DI == DistanceMap.end()) {
294       // Must be below if it hasn't been assigned a distance yet.
295       isBelow = true;
296       hasDistInfo = false;
297     } else if (DI->second > CurDist)
298       isBelow = true;
299     if (isBelow) {
300       if (UDO.isUse())
301         Uses.push_back(UDMI);
302       if (UDO.isDef())
303         Defs.push_back(UDMI);
304     }
305   }
306
307   if (Uses.empty())
308     // No uses below.
309     return false;
310   else if (!Uses.empty() && Defs.empty())
311     // There are uses below but no defs below.
312     return true;
313   // There are both uses and defs below. We need to know which comes first.
314   if (!hasDistInfo) {
315     // Complete DistanceMap for this MBB. This information is computed only
316     // once per MBB.
317     ++I;
318     ++CurDist;
319     for (MachineBasicBlock::iterator E = MBB->end(); I != E; ++I, ++CurDist)
320       DistanceMap.insert(std::make_pair(I, CurDist));
321   }
322
323   unsigned EarliestUse = DistanceMap[Uses[0]];
324   for (unsigned i = 1, e = Uses.size(); i != e; ++i) {
325     unsigned Dist = DistanceMap[Uses[i]];
326     if (Dist < EarliestUse)
327       EarliestUse = Dist;
328   }
329   for (unsigned i = 0, e = Defs.size(); i != e; ++i) {
330     unsigned Dist = DistanceMap[Defs[i]];
331     if (Dist < EarliestUse)
332       // The register is defined before its first use below.
333       return false;
334   }
335   return true;
336 }
337
338 bool LiveVariables::HandlePhysRegKill(unsigned Reg) {
339   if (!PhysRegUse[Reg] && !PhysRegDef[Reg])
340     return false;
341
342   MachineInstr *LastRefOrPartRef = PhysRegUse[Reg]
343     ? PhysRegUse[Reg] : PhysRegDef[Reg];
344   unsigned LastRefOrPartRefDist = DistanceMap[LastRefOrPartRef];
345   // The whole register is used.
346   // AL =
347   // AH =
348   //
349   //    = AX
350   //    = AL, AX<imp-use, kill>
351   // AX =
352   //
353   // Or whole register is defined, but not used at all.
354   // AX<dead> =
355   // ...
356   // AX =
357   //
358   // Or whole register is defined, but only partly used.
359   // AX<dead> = AL<imp-def>
360   //    = AL<kill>
361   // AX = 
362   SmallSet<unsigned, 8> PartUses;
363   for (const unsigned *SubRegs = TRI->getSubRegisters(Reg);
364        unsigned SubReg = *SubRegs; ++SubRegs) {
365     if (MachineInstr *Use = PhysRegUse[SubReg]) {
366       PartUses.insert(SubReg);
367       for (const unsigned *SS = TRI->getSubRegisters(SubReg); *SS; ++SS)
368         PartUses.insert(*SS);
369       unsigned Dist = DistanceMap[Use];
370       if (Dist > LastRefOrPartRefDist) {
371         LastRefOrPartRefDist = Dist;
372         LastRefOrPartRef = Use;
373       }
374     }
375   }
376   if (LastRefOrPartRef == PhysRegDef[Reg])
377     // Not used at all.
378     LastRefOrPartRef->addRegisterDead(Reg, TRI, true);
379
380   /* Partial uses. Mark register def dead and add implicit def of
381      sub-registers which are used.
382     FIXME: LiveIntervalAnalysis can't handle this yet!
383     EAX<dead>  = op  AL<imp-def>
384     That is, EAX def is dead but AL def extends pass it.
385     Enable this after live interval analysis is fixed to improve codegen!
386   else if (!PhysRegUse[Reg]) {
387     PhysRegDef[Reg]->addRegisterDead(Reg, TRI, true);
388     for (const unsigned *SubRegs = TRI->getSubRegisters(Reg);
389          unsigned SubReg = *SubRegs; ++SubRegs) {
390       if (PartUses.count(SubReg)) {
391         PhysRegDef[Reg]->addOperand(MachineOperand::CreateReg(SubReg,
392                                                               true, true));
393         LastRefOrPartRef->addRegisterKilled(SubReg, TRI, true);
394         for (const unsigned *SS = TRI->getSubRegisters(SubReg); *SS; ++SS)
395           PartUses.erase(*SS);
396       }
397     }
398   } */
399   else
400     LastRefOrPartRef->addRegisterKilled(Reg, TRI, true);
401   return true;
402 }
403
404 void LiveVariables::HandlePhysRegDef(unsigned Reg, MachineInstr *MI) {
405   // What parts of the register are previously defined?
406   SmallSet<unsigned, 32> Live;
407   if (PhysRegDef[Reg] || PhysRegUse[Reg]) {
408     Live.insert(Reg);
409     for (const unsigned *SS = TRI->getSubRegisters(Reg); *SS; ++SS)
410       Live.insert(*SS);
411   } else {
412     for (const unsigned *SubRegs = TRI->getSubRegisters(Reg);
413          unsigned SubReg = *SubRegs; ++SubRegs) {
414       // If a register isn't itself defined, but all parts that make up of it
415       // are defined, then consider it also defined.
416       // e.g.
417       // AL =
418       // AH =
419       //    = AX
420       if (PhysRegDef[SubReg] || PhysRegUse[SubReg]) {
421         Live.insert(SubReg);
422         for (const unsigned *SS = TRI->getSubRegisters(SubReg); *SS; ++SS)
423           Live.insert(*SS);
424       }
425     }
426   }
427
428   // Start from the largest piece, find the last time any part of the register
429   // is referenced.
430   if (!HandlePhysRegKill(Reg)) {
431     // Only some of the sub-registers are used.
432     for (const unsigned *SubRegs = TRI->getSubRegisters(Reg);
433          unsigned SubReg = *SubRegs; ++SubRegs) {
434       if (!Live.count(SubReg))
435         // Skip if this sub-register isn't defined.
436         continue;
437       if (HandlePhysRegKill(SubReg)) {
438         Live.erase(SubReg);
439         for (const unsigned *SS = TRI->getSubRegisters(SubReg); *SS; ++SS)
440           Live.erase(*SS);
441       }
442     }
443     assert(Live.empty() && "Not all defined registers are killed / dead?");
444   }
445
446   if (MI) {
447     // Does this extend the live range of a super-register?
448     SmallSet<unsigned, 8> Processed;
449     for (const unsigned *SuperRegs = TRI->getSuperRegisters(Reg);
450          unsigned SuperReg = *SuperRegs; ++SuperRegs) {
451       if (Processed.count(SuperReg))
452         continue;
453       MachineInstr *LastRef = PhysRegUse[SuperReg]
454         ? PhysRegUse[SuperReg] : PhysRegDef[SuperReg];
455       if (LastRef && LastRef != MI) {
456         // The larger register is previously defined. Now a smaller part is
457         // being re-defined. Treat it as read/mod/write if there are uses
458         // below.
459         // EAX =
460         // AX  =        EAX<imp-use,kill>, EAX<imp-def>
461         // ...
462         ///    =  EAX
463         if (hasRegisterUseBelow(SuperReg, MI, MI->getParent())) {
464           MI->addOperand(MachineOperand::CreateReg(SuperReg, false/*IsDef*/,
465                                                    true/*IsImp*/,true/*IsKill*/));
466           MI->addOperand(MachineOperand::CreateReg(SuperReg, true/*IsDef*/,
467                                                    true/*IsImp*/));
468           PhysRegDef[SuperReg]  = MI;
469           PhysRegUse[SuperReg]  = NULL;
470           Processed.insert(SuperReg);
471           for (const unsigned *SS = TRI->getSubRegisters(SuperReg); *SS; ++SS) {
472             PhysRegDef[*SS]  = MI;
473             PhysRegUse[*SS]  = NULL;
474             Processed.insert(*SS);
475           }
476         } else {
477           // Otherwise, the super register is killed.
478           if (HandlePhysRegKill(SuperReg)) {
479             PhysRegDef[SuperReg]  = NULL;
480             PhysRegUse[SuperReg]  = NULL;
481             for (const unsigned *SS = TRI->getSubRegisters(SuperReg); *SS; ++SS) {
482               PhysRegDef[*SS]  = NULL;
483               PhysRegUse[*SS]  = NULL;
484               Processed.insert(*SS);
485             }
486           }
487         }
488       }
489     }
490
491     // Remember this def.
492     PhysRegDef[Reg]  = MI;
493     PhysRegUse[Reg]  = NULL;
494     for (const unsigned *SubRegs = TRI->getSubRegisters(Reg);
495          unsigned SubReg = *SubRegs; ++SubRegs) {
496       PhysRegDef[SubReg]  = MI;
497       PhysRegUse[SubReg]  = NULL;
498     }
499   }
500 }
501
502 bool LiveVariables::runOnMachineFunction(MachineFunction &mf) {
503   MF = &mf;
504   MRI = &mf.getRegInfo();
505   TRI = MF->getTarget().getRegisterInfo();
506
507   ReservedRegisters = TRI->getReservedRegs(mf);
508
509   unsigned NumRegs = TRI->getNumRegs();
510   PhysRegDef  = new MachineInstr*[NumRegs];
511   PhysRegUse  = new MachineInstr*[NumRegs];
512   PHIVarInfo = new SmallVector<unsigned, 4>[MF->getNumBlockIDs()];
513   std::fill(PhysRegDef,  PhysRegDef  + NumRegs, (MachineInstr*)0);
514   std::fill(PhysRegUse,  PhysRegUse  + NumRegs, (MachineInstr*)0);
515
516   /// Get some space for a respectable number of registers.
517   VirtRegInfo.resize(64);
518
519   analyzePHINodes(mf);
520
521   // Calculate live variable information in depth first order on the CFG of the
522   // function.  This guarantees that we will see the definition of a virtual
523   // register before its uses due to dominance properties of SSA (except for PHI
524   // nodes, which are treated as a special case).
525   MachineBasicBlock *Entry = MF->begin();
526   SmallPtrSet<MachineBasicBlock*,16> Visited;
527
528   for (df_ext_iterator<MachineBasicBlock*, SmallPtrSet<MachineBasicBlock*,16> >
529          DFI = df_ext_begin(Entry, Visited), E = df_ext_end(Entry, Visited);
530        DFI != E; ++DFI) {
531     MachineBasicBlock *MBB = *DFI;
532
533     // Mark live-in registers as live-in.
534     for (MachineBasicBlock::const_livein_iterator II = MBB->livein_begin(),
535            EE = MBB->livein_end(); II != EE; ++II) {
536       assert(TargetRegisterInfo::isPhysicalRegister(*II) &&
537              "Cannot have a live-in virtual register!");
538       HandlePhysRegDef(*II, 0);
539     }
540
541     // Loop over all of the instructions, processing them.
542     DistanceMap.clear();
543     unsigned Dist = 0;
544     for (MachineBasicBlock::iterator I = MBB->begin(), E = MBB->end();
545          I != E; ++I) {
546       MachineInstr *MI = I;
547       DistanceMap.insert(std::make_pair(MI, Dist++));
548
549       // Process all of the operands of the instruction...
550       unsigned NumOperandsToProcess = MI->getNumOperands();
551
552       // Unless it is a PHI node.  In this case, ONLY process the DEF, not any
553       // of the uses.  They will be handled in other basic blocks.
554       if (MI->getOpcode() == TargetInstrInfo::PHI)
555         NumOperandsToProcess = 1;
556
557       SmallVector<unsigned, 4> UseRegs;
558       SmallVector<unsigned, 4> DefRegs;
559       for (unsigned i = 0; i != NumOperandsToProcess; ++i) {
560         const MachineOperand &MO = MI->getOperand(i);
561         if (MO.isReg() && MO.getReg()) {
562           unsigned MOReg = MO.getReg();
563           if (MO.isUse())
564             UseRegs.push_back(MOReg);
565           if (MO.isDef())
566             DefRegs.push_back(MOReg);
567         }
568       }
569
570       // Process all uses.
571       for (unsigned i = 0, e = UseRegs.size(); i != e; ++i) {
572         unsigned MOReg = UseRegs[i];
573         if (TargetRegisterInfo::isVirtualRegister(MOReg))
574           HandleVirtRegUse(MOReg, MBB, MI);
575         else if (!ReservedRegisters[MOReg])
576           HandlePhysRegUse(MOReg, MI);
577       }
578
579       // Process all defs.
580       for (unsigned i = 0, e = DefRegs.size(); i != e; ++i) {
581         unsigned MOReg = DefRegs[i];
582         if (TargetRegisterInfo::isVirtualRegister(MOReg))
583           HandleVirtRegDef(MOReg, MI);
584         else if (!ReservedRegisters[MOReg])
585           HandlePhysRegDef(MOReg, MI);
586       }
587     }
588
589     // Handle any virtual assignments from PHI nodes which might be at the
590     // bottom of this basic block.  We check all of our successor blocks to see
591     // if they have PHI nodes, and if so, we simulate an assignment at the end
592     // of the current block.
593     if (!PHIVarInfo[MBB->getNumber()].empty()) {
594       SmallVector<unsigned, 4>& VarInfoVec = PHIVarInfo[MBB->getNumber()];
595
596       for (SmallVector<unsigned, 4>::iterator I = VarInfoVec.begin(),
597              E = VarInfoVec.end(); I != E; ++I)
598         // Mark it alive only in the block we are representing.
599         MarkVirtRegAliveInBlock(getVarInfo(*I),MRI->getVRegDef(*I)->getParent(),
600                                 MBB);
601     }
602
603     // Finally, if the last instruction in the block is a return, make sure to
604     // mark it as using all of the live-out values in the function.
605     if (!MBB->empty() && MBB->back().getDesc().isReturn()) {
606       MachineInstr *Ret = &MBB->back();
607
608       for (MachineRegisterInfo::liveout_iterator
609            I = MF->getRegInfo().liveout_begin(),
610            E = MF->getRegInfo().liveout_end(); I != E; ++I) {
611         assert(TargetRegisterInfo::isPhysicalRegister(*I) &&
612                "Cannot have a live-out virtual register!");
613         HandlePhysRegUse(*I, Ret);
614
615         // Add live-out registers as implicit uses.
616         if (!Ret->readsRegister(*I))
617           Ret->addOperand(MachineOperand::CreateReg(*I, false, true));
618       }
619     }
620
621     // Loop over PhysRegDef / PhysRegUse, killing any registers that are
622     // available at the end of the basic block.
623     for (unsigned i = 0; i != NumRegs; ++i)
624       if (PhysRegDef[i] || PhysRegUse[i])
625         HandlePhysRegDef(i, 0);
626
627     std::fill(PhysRegDef,  PhysRegDef  + NumRegs, (MachineInstr*)0);
628     std::fill(PhysRegUse,  PhysRegUse  + NumRegs, (MachineInstr*)0);
629   }
630
631   // Convert and transfer the dead / killed information we have gathered into
632   // VirtRegInfo onto MI's.
633   for (unsigned i = 0, e1 = VirtRegInfo.size(); i != e1; ++i)
634     for (unsigned j = 0, e2 = VirtRegInfo[i].Kills.size(); j != e2; ++j)
635       if (VirtRegInfo[i].Kills[j] ==
636           MRI->getVRegDef(i + TargetRegisterInfo::FirstVirtualRegister))
637         VirtRegInfo[i]
638           .Kills[j]->addRegisterDead(i +
639                                      TargetRegisterInfo::FirstVirtualRegister,
640                                      TRI);
641       else
642         VirtRegInfo[i]
643           .Kills[j]->addRegisterKilled(i +
644                                        TargetRegisterInfo::FirstVirtualRegister,
645                                        TRI);
646
647   // Check to make sure there are no unreachable blocks in the MC CFG for the
648   // function.  If so, it is due to a bug in the instruction selector or some
649   // other part of the code generator if this happens.
650 #ifndef NDEBUG
651   for(MachineFunction::iterator i = MF->begin(), e = MF->end(); i != e; ++i)
652     assert(Visited.count(&*i) != 0 && "unreachable basic block found");
653 #endif
654
655   delete[] PhysRegDef;
656   delete[] PhysRegUse;
657   delete[] PHIVarInfo;
658
659   return false;
660 }
661
662 /// replaceKillInstruction - Update register kill info by replacing a kill
663 /// instruction with a new one.
664 void LiveVariables::replaceKillInstruction(unsigned Reg, MachineInstr *OldMI,
665                                            MachineInstr *NewMI) {
666   VarInfo &VI = getVarInfo(Reg);
667   std::replace(VI.Kills.begin(), VI.Kills.end(), OldMI, NewMI);
668 }
669
670 /// removeVirtualRegistersKilled - Remove all killed info for the specified
671 /// instruction.
672 void LiveVariables::removeVirtualRegistersKilled(MachineInstr *MI) {
673   for (unsigned i = 0, e = MI->getNumOperands(); i != e; ++i) {
674     MachineOperand &MO = MI->getOperand(i);
675     if (MO.isReg() && MO.isKill()) {
676       MO.setIsKill(false);
677       unsigned Reg = MO.getReg();
678       if (TargetRegisterInfo::isVirtualRegister(Reg)) {
679         bool removed = getVarInfo(Reg).removeKill(MI);
680         assert(removed && "kill not in register's VarInfo?");
681         removed = true;
682       }
683     }
684   }
685 }
686
687 /// analyzePHINodes - Gather information about the PHI nodes in here. In
688 /// particular, we want to map the variable information of a virtual register
689 /// which is used in a PHI node. We map that to the BB the vreg is coming from.
690 ///
691 void LiveVariables::analyzePHINodes(const MachineFunction& Fn) {
692   for (MachineFunction::const_iterator I = Fn.begin(), E = Fn.end();
693        I != E; ++I)
694     for (MachineBasicBlock::const_iterator BBI = I->begin(), BBE = I->end();
695          BBI != BBE && BBI->getOpcode() == TargetInstrInfo::PHI; ++BBI)
696       for (unsigned i = 1, e = BBI->getNumOperands(); i != e; i += 2)
697         PHIVarInfo[BBI->getOperand(i + 1).getMBB()->getNumber()]
698           .push_back(BBI->getOperand(i).getReg());
699 }