FROMLIST: PCI: rockchip: Add system PM support

This patch adds system PM support for Rockchip's RC.
For pre S3, the EP is configured into D3 state which guarantees
the link state should be in L1. So we could send PME_Turn_Off message
to the EP and wait for its ACK to make the link state into L2 or L3
without the aux-supply. This could help save more power which I think
should be very important for mobile devices.

As note that there is a 5s timeout for RC to wait for the PMA_ACK
aftering send PME_Turn_Off. Technically it should depends on the
hierarchy of devices but seems PCIe core framework doesn't handle the
L2/3 for S3 at all. So that means we should presume to set a default
value for PME_ACK. From the bug report[1], we could find a statement that
Microsoft Windows versions typically wait for 5 seconds. So we are prone
to take 5s for this timeout here.

Change-Id: I3500911daaad07dfd632cda0f2f4b62cfc2909a2
[1] https://lists.launchpad.net/kernel-packages/msg123315.html
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
(cherry picked from https://patchwork.kernel.org/patch/9470515/)

dt-bindings: iommu: Add clock and pd for rockchip iommu

Change-Id: I7762dc71253aed0f5e06c0bf66e0bd668b3b4821
Signed-off-by: Simon <xxm@rock-chips.com>

iommu/rockchip: Add pd/clk operation in iommu

Rk iommus share pd and clk with their masters, to make iommus independent,
iommus need to manage pd and clk by using pm_runtime_get_sync API who is
not atomic save, might lead to sleep, we change the spin lock to mutex to
satisfy the pm_runtime_get_sync, callers of rk_iommu_attach_device
and rk_iommu_map should guarantee not in a atomic path.

Change-Id: Icbe175030d36572e19740d23eae94f49fe59eb10
Signed-off-by: Simon <xxm@rock-chips.com>

usb: xhci-plat: check hcc_params after add hcd

The commit 4ac53087d6d4 ("usb: xhci: plat: Create both
HCDs before adding them") move add hcd to the end of
probe, this cause hcc_params uninitiated, because xHCI
driver sets hcc_params in xhci_gen_setup() called from
usb_add_hcd().

This patch checks the Maximum Primary Stream Array Size
in the hcc_params register after add hcd.

Change-Id: I5a05ca6a8ac25e914752914abb70612849cc175e
Signed-off-by: William Wu <wulf@rock-chips.com>

UPSTREAM: PCI: rockchip: move the deassert of pm/aclk/pclk after phy_init

Move them after phy_init as we want to optimize the logic
of reset control and reuse rockchip_pcie_init_port later
which should fully follow the cold boot procedure of ROM
code.

Change-Id: I0a826a6de91a7c413e42e36ea5ceea5007ee7b73
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
(cherry picked from 0722bdd2962a4a0f6d5e8973b0d274d147adacfb)

UPSTREAM: PCI: rockchip: split out rockchip_cfg_atu

We split out a new function, rockchip_cfg_atu, in order to
re-configure the atu when missing these information after
wakeup from S3.

Change-Id: I515b1bc5b8bc9be17b5d9858e17a05835d2fd144
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
(cherry picked from 9e663d3f11ee34dfe92dcea98992151cae55e1ea)

arm64: dts: rockchip: add PCIe stuff for rk3399-tve1205g

Add PCIe dt-bindings for rk3399-tve1205g and keep them as
disabled status currently.

Change-Id: Ie92c6e330a6588ff88d69306674429d69b971b58
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>

video/rockchip: rga2 can be used dma coherent

Change-Id: I123bec313212ae2a9682e1d6f219a2f705c25187
Signed-off-by: Zikim,Wei <wzq@rock-chips.com>

drm/rockchip: add mm dump debugfs

shell# cat /sys/kernel/debug/dri/0/mm_dump

0x0000000000000000-0x00000000000a6000: 679936: free
0x00000000000a6000-0x0000000000970000: 9216000: used
0x0000000000970000-0x000000000123a000: 9216000: used
0x000000000123a000-0x0000000001b04000: 9216000: used
0x0000000001b04000-0x00000000023ce000: 9216000: used
0x00000000023ce000-0x0000000002c98000: 9216000: used
0x0000000002c98000-0x0000000003562000: 9216000: used
0x0000000003562000-0x0000000003e2c000: 9216000: used
0x0000000003e2c000-0x0000000100000000: 4229775360: free
total: 4294967296, used 64512000 free 4230455296

Change-Id: I39cb5b12a63418c050b3bd890829f831f898db4e
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>

drm/rockchip: add drm summary debugfs node

With the summary debug node, show current display status would be easier.

Using step:
shell# cat /sys/kernel/debug/dri/0/summary

vop name: ff900000.vop status=active
Display mode: 1200x1920 fps[60] clk[160000] type[8] flag[a]
        H: 1200 1320 1340 1361
        V: 1920 1941 1944 1962
win0-0: status=active
        format: AB24 little-endian (0x34324241)
        zpos: 0
        src: pos[0x0] rect[1200x1920]
        dst: pos[0x0] rect[1200x1920]
        buf[0]: addr: 0x9e19000 pitch: 4800 offset: 0
win1-0: status=disabled
win2-0: status=disabled
win2-0: status=disabled
win2-1: status=disabled
win2-2: status=disabled
win3-0: status=disabled
win3-0: status=disabled
win3-1: status=disabled
win3-2: status=disabled
vop name: ff8f0000.vop status=disabled

Change-Id: I386398b0617f0c18902c4cadad5906be343cc4de
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>

video: rockchip: dp: modify the function names for fb-based dp driver.

change the name of functions for fb-based dp driver in order to fix
the compile errors of drm-based dp driver.

Change-Id: I6544c82d81bf4d8e5a7b936c7959349765d55049
Signed-off-by: wenping.zhang <wenping.zhang@rock-chips.com>

ARM64: dts: rk3399: sapphire-excavator enabled pcie audio ir

Change-Id: Idba0460db911d45a2b546bfa6aabf2a4f8ca7dcd
Signed-off-by: Wu Liangqing <wlq@rock-chips.com>

UPSTREAM: drm/mm: avoid possible null pointer dereference

Do not dereference node before the check if node is NULL.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1463602639-4861-1-git-send-email-xypron.glpk@gmx.de
(cherry picked from commit b80d3942329dcd43580adc3f7c0a098515b5feec)

Change-Id: I672ce10214e1268a043e6a11268ff400024cc883
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>

UPSTREAM: drm/rockchip: Finish initialization before registering DRM device

Currently the driver calls drm_dev_register() directly after allocating
the DRM device and then continues with further initialization. This is
incorrect, because drm_dev_register() is supposed to be called after all
initialization is done. This problem was masked by the fact that
drm_dev_register() did not use to do anything special before, but
recently it started to call drm_connector_register_all(), which leads to
a crash if the driver is not fully initialized.

This patch fixes the problem by moving the call to drm_dev_register() to
the end of the initialization sequence and also removing the, now
unnecessary, call to drm_connector_register_all() from driver code.

Fixes: f706974a69b6 ("drm/rockchip: Drop drm_driver.load/unload callbacks")
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
[danvet: Fix up cleanup labels a bit.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466483254-35373-1-git-send-email-tfiga@chromium.org
(cherry picked from commit 9127f99c4801f323ffbb3b755259f3a679f66c7c)

Change-Id: Ie6d56242507c413db5e1b93e587d89a3a2200db6
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>

UPSTREAM: drm/rockchip: Drop drm_driver.load/unload callbacks

They are deprecated and by moving their implementations to bind/unbind
we can call drm_connector_register_all instead of open-coding it.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465557253-10670-1-git-send-email-tomeu.vizoso@collabora.com
(cherry picked from commit f706974a69b6e2be8f69fb4dc89158a6297338f9)

Change-Id: I9e97e25f1bf84609ba1dd7040478dee0686e665b
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>

UPSTREAM: drm: Paper over locking inversion after registration rework

drm_connector_register_all requires a few too many locks because our
connector_list locking is busted. Add another FIXME+hack to work
around this. This should address the below lockdep splat:

======================================================
[ INFO: possible circular locking dependency detected ]
4.7.0-rc5+ #524 Tainted: G           O
-------------------------------------------------------
kworker/u8:0/6 is trying to acquire lock:
 (&dev->mode_config.mutex){+.+.+.}, at: [<ffffffff815afde0>] drm_modeset_lock_all+0x40/0x120

but task is already holding lock:
 ((fb_notifier_list).rwsem){++++.+}, at: [<ffffffff810ac195>] __blocking_notifier_call_chain+0x35/0x70

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 ((fb_notifier_list).rwsem){++++.+}:
       [<ffffffff810df611>] lock_acquire+0xb1/0x200
       [<ffffffff819a55b4>] down_write+0x44/0x80
       [<ffffffff810abf91>] blocking_notifier_chain_register+0x21/0xb0
       [<ffffffff814c7448>] fb_register_client+0x18/0x20
       [<ffffffff814c6c86>] backlight_device_register+0x136/0x260
       [<ffffffffa0127eb2>] intel_backlight_device_register+0xa2/0x160 [i915]
       [<ffffffffa00f46be>] intel_connector_register+0xe/0x10 [i915]
       [<ffffffffa0112bfb>] intel_dp_connector_register+0x1b/0x80 [i915]
       [<ffffffff8159dfea>] drm_connector_register+0x4a/0x80
       [<ffffffff8159fe44>] drm_connector_register_all+0x64/0xf0
       [<ffffffff815a2a64>] drm_modeset_register_all+0x174/0x1c0
       [<ffffffff81599b72>] drm_dev_register+0xc2/0xd0
       [<ffffffffa00621d7>] i915_driver_load+0x1547/0x2200 [i915]
       [<ffffffffa006d80f>] i915_pci_probe+0x4f/0x70 [i915]
       [<ffffffff814a2135>] local_pci_probe+0x45/0xa0
       [<ffffffff814a349b>] pci_device_probe+0xdb/0x130
       [<ffffffff815c07e3>] driver_probe_device+0x223/0x440
       [<ffffffff815c0ad5>] __driver_attach+0xd5/0x100
       [<ffffffff815be386>] bus_for_each_dev+0x66/0xa0
       [<ffffffff815c002e>] driver_attach+0x1e/0x20
       [<ffffffff815bf9be>] bus_add_driver+0x1ee/0x280
       [<ffffffff815c1810>] driver_register+0x60/0xe0
       [<ffffffff814a1a10>] __pci_register_driver+0x60/0x70
       [<ffffffffa01a905b>] i915_init+0x5b/0x62 [i915]
       [<ffffffff8100042d>] do_one_initcall+0x3d/0x150
       [<ffffffff811a935b>] do_init_module+0x5f/0x1d9
       [<ffffffff81124416>] load_module+0x20e6/0x27e0
       [<ffffffff81124d63>] SYSC_finit_module+0xc3/0xf0
       [<ffffffff81124dae>] SyS_finit_module+0xe/0x10
       [<ffffffff819a83a9>] entry_SYSCALL_64_fastpath+0x1c/0xac

-> #0 (&dev->mode_config.mutex){+.+.+.}:
       [<ffffffff810df0ac>] __lock_acquire+0x10fc/0x1260
       [<ffffffff810df611>] lock_acquire+0xb1/0x200
       [<ffffffff819a3097>] mutex_lock_nested+0x67/0x3c0
       [<ffffffff815afde0>] drm_modeset_lock_all+0x40/0x120
       [<ffffffff8158f79b>] drm_fb_helper_restore_fbdev_mode_unlocked+0x2b/0x80
       [<ffffffff8158f81d>] drm_fb_helper_set_par+0x2d/0x50
       [<ffffffffa0105f7a>] intel_fbdev_set_par+0x1a/0x60 [i915]
       [<ffffffff814c13c6>] fbcon_init+0x586/0x610
       [<ffffffff8154d16a>] visual_init+0xca/0x130
       [<ffffffff8154e611>] do_bind_con_driver+0x1c1/0x3a0
       [<ffffffff8154eaf6>] do_take_over_console+0x116/0x180
       [<ffffffff814bd3a7>] do_fbcon_takeover+0x57/0xb0
       [<ffffffff814c1e48>] fbcon_event_notify+0x658/0x750
       [<ffffffff810abcae>] notifier_call_chain+0x3e/0xb0
       [<ffffffff810ac1ad>] __blocking_notifier_call_chain+0x4d/0x70
       [<ffffffff810ac1e6>] blocking_notifier_call_chain+0x16/0x20
       [<ffffffff814c748b>] fb_notifier_call_chain+0x1b/0x20
       [<ffffffff814c86b1>] register_framebuffer+0x251/0x330
       [<ffffffff8158fa9f>] drm_fb_helper_initial_config+0x25f/0x3f0
       [<ffffffffa0106b48>] intel_fbdev_initial_config+0x18/0x30 [i915]
       [<ffffffff810adfd8>] async_run_entry_fn+0x48/0x150
       [<ffffffff810a3947>] process_one_work+0x1e7/0x750
       [<ffffffff810a3efb>] worker_thread+0x4b/0x4f0
       [<ffffffff810aad4f>] kthread+0xef/0x110
       [<ffffffff819a85ef>] ret_from_fork+0x1f/0x40

other info that might help us debug this:

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock((fb_notifier_list).rwsem);
                               lock(&dev->mode_config.mutex);
                               lock((fb_notifier_list).rwsem);
  lock(&dev->mode_config.mutex);

 *** DEADLOCK ***

6 locks held by kworker/u8:0/6:
 #0:  ("events_unbound"){.+.+.+}, at: [<ffffffff810a38c9>] process_one_work+0x169/0x750
 #1:  ((&entry->work)){+.+.+.}, at: [<ffffffff810a38c9>] process_one_work+0x169/0x750
 #2:  (registration_lock){+.+.+.}, at: [<ffffffff814c8487>] register_framebuffer+0x27/0x330
 #3:  (console_lock){+.+.+.}, at: [<ffffffff814c86ce>] register_framebuffer+0x26e/0x330
 #4:  (&fb_info->lock){+.+.+.}, at: [<ffffffff814c78dd>] lock_fb_info+0x1d/0x40
 #5:  ((fb_notifier_list).rwsem){++++.+}, at: [<ffffffff810ac195>] __blocking_notifier_call_chain+0x35/0x70

stack backtrace:
CPU: 2 PID: 6 Comm: kworker/u8:0 Tainted: G           O    4.7.0-rc5+ #524
Hardware name: Intel Corp. Broxton P/NOTEBOOK, BIOS APLKRVPA.X64.0138.B33.1606250842 06/25/2016
Workqueue: events_unbound async_run_entry_fn
 0000000000000000 ffff8800758577f0 ffffffff814507a5 ffffffff828b9900
 ffffffff828b9900 ffff880075857830 ffffffff810dc6fa ffff880075857880
 ffff88007584d688 0000000000000005 0000000000000006 ffff88007584d6b0
Call Trace:
 [<ffffffff814507a5>] dump_stack+0x67/0x92
 [<ffffffff810dc6fa>] print_circular_bug+0x1aa/0x200
 [<ffffffff810df0ac>] __lock_acquire+0x10fc/0x1260
 [<ffffffff810df611>] lock_acquire+0xb1/0x200
 [<ffffffff815afde0>] ? drm_modeset_lock_all+0x40/0x120
 [<ffffffff815afde0>] ? drm_modeset_lock_all+0x40/0x120
 [<ffffffff819a3097>] mutex_lock_nested+0x67/0x3c0
 [<ffffffff815afde0>] ? drm_modeset_lock_all+0x40/0x120
 [<ffffffff810fa85f>] ? rcu_read_lock_sched_held+0x7f/0x90
 [<ffffffff81208218>] ? kmem_cache_alloc_trace+0x248/0x2b0
 [<ffffffff815afdc5>] ? drm_modeset_lock_all+0x25/0x120
 [<ffffffff815afde0>] drm_modeset_lock_all+0x40/0x120
 [<ffffffff8158f79b>] drm_fb_helper_restore_fbdev_mode_unlocked+0x2b/0x80
 [<ffffffff8158f81d>] drm_fb_helper_set_par+0x2d/0x50
 [<ffffffffa0105f7a>] intel_fbdev_set_par+0x1a/0x60 [i915]
 [<ffffffff814c13c6>] fbcon_init+0x586/0x610
 [<ffffffff8154d16a>] visual_init+0xca/0x130
 [<ffffffff8154e611>] do_bind_con_driver+0x1c1/0x3a0
 [<ffffffff8154eaf6>] do_take_over_console+0x116/0x180
 [<ffffffff814bd3a7>] do_fbcon_takeover+0x57/0xb0
 [<ffffffff814c1e48>] fbcon_event_notify+0x658/0x750
 [<ffffffff810abcae>] notifier_call_chain+0x3e/0xb0
 [<ffffffff810ac1ad>] __blocking_notifier_call_chain+0x4d/0x70
 [<ffffffff810ac1e6>] blocking_notifier_call_chain+0x16/0x20
 [<ffffffff814c748b>] fb_notifier_call_chain+0x1b/0x20
 [<ffffffff814c86b1>] register_framebuffer+0x251/0x330
 [<ffffffff815b7e8d>] ? vga_switcheroo_client_fb_set+0x5d/0x70
 [<ffffffff8158fa9f>] drm_fb_helper_initial_config+0x25f/0x3f0
 [<ffffffffa0106b48>] intel_fbdev_initial_config+0x18/0x30 [i915]
 [<ffffffff810adfd8>] async_run_entry_fn+0x48/0x150
 [<ffffffff810a3947>] process_one_work+0x1e7/0x750
 [<ffffffff810a38c9>] ? process_one_work+0x169/0x750
 [<ffffffff810a3efb>] worker_thread+0x4b/0x4f0
 [<ffffffff810a3eb0>] ? process_one_work+0x750/0x750
 [<ffffffff810aad4f>] kthread+0xef/0x110
 [<ffffffff819a85ef>] ret_from_fork+0x1f/0x40
 [<ffffffff810aac60>] ? kthread_stop+0x2e0/0x2e0

v2: Rebase onto the right branch (hand-editing patches ftw) and add more
reporters.

Reported-by: Imre Deak <imre.deak@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: Jiri Kosina <jikos@kernel.org>
Cc: Jiri Kosina <jikos@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 5c6c201ccbaf9d3901f829441d457293f7ca8ef4)

Change-Id: I24bc8426dafa81dc1f1de31aea527d75060ed68f
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>

UPSTREAM: drm: Add callbacks for late registering

Like what has been done for connectors add callbacks on encoder,
crtc and plane to let driver do actions after drm device registration.

Correspondingly, add callbacks called before unregister drm device.

version 2:
add drm_modeset_register_all() and drm_modeset_unregister_all()
to centralize all calls

version 3:
in error case unwind registers in drm_modeset_register_all
fix uninitialed return value
inverse order of unregistration in drm_modeset_unregister_all

version 4:
move function definitions in drm_crtc_internal.h
remove not needed documentation

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466519829-4000-1-git-send-email-benjamin.gaignard@linaro.org
(cherry picked from commit 79190ea2658a93818791335aa99969ca779161c6)

Change-Id: I836e8ea62b46c0eae89cf8c70bcf3ea4e10068f5
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>

UPSTREAM: drm: Protect drm_connector_register_all() under DRIVER_MODESET

0-day kbuilder found

[    1.360244] BUG: unable to handle kernel NULL pointer dereference at   (null)
[    1.360972] IP: [<c14db9ad>] mutex_lock_nested+0x11f/0x2c3
[    1.361512] *pde = 00000000
[    1.361827] Oops: 0002 [#1]
[    1.362123] Modules linked in:
[    1.362451] CPU: 0 PID: 1 Comm: swapper Not tainted 4.7.0-rc2-00564-ge28cd4d #1
[    1.363202] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
[    1.364105] task: c03d0000 ti: d28da000 task.ti: d28da000
[    1.364636] EIP: 0060:[<c14db9ad>] EFLAGS: 00210096 CPU: 0
[    1.365215] EIP is at mutex_lock_nested+0x11f/0x2c3
[    1.365703] EAX: 00000000 EBX: d39e8ae8 ECX: d39e8b14 EDX: c1361cf9
[    1.366351] ESI: c03d0000 EDI: d28dbed0 EBP: d28dbeec ESP: d28dbec0
[    1.367010]  DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[    1.367534] CR0: 80050033 CR2: 00000000 CR3: 019a9000 CR4: 00000690
[    1.368152] Stack:
[    1.368356]  d39e8b14 d39e8b24 c1361cf9 00200246 d39e8b14 00000000 11111111 d28dbed0
[    1.369235]  d39e8800 d39e8ae8 00000000 d28dbf08 c1361cf9 d28dbf0c c10b25be d39e8800
[    1.370087]  00000000 00000000 d28dbf1c c135e37d fffffff4 ffffffff 00000000 d28dbf28
[    1.371012] Call Trace:
[    1.371272]  [<c1361cf9>] ? drm_connector_register_all+0x1a/0x92
[    1.371847]  [<c1361cf9>] drm_connector_register_all+0x1a/0x92
[    1.372421]  [<c10b25be>] ? kstrdup+0x25/0x3a
[    1.372863]  [<c135e37d>] drm_dev_register+0x59/0x99
[    1.373358]  [<c195ea3e>] vgem_init+0x34/0x49
[    1.373770]  [<c195ea0a>] ? mipi_dsi_bus_init+0xf/0xf
[    1.374257]  [<c100048f>] do_one_initcall+0x7c/0xfd
[    1.374754]  [<c104b409>] ? parse_args+0x1fd/0x314
[    1.375259]  [<c1939c10>] ? kernel_init_freeable+0xd0/0x179
[    1.375837]  [<c1939c2c>] kernel_init_freeable+0xec/0x179
[    1.376371]  [<c14d66ea>] kernel_init+0x8/0xcb
[    1.376806]  [<c14debce>] ret_from_kernel_thread+0xe/0x30
[    1.377322]  [<c14d66e2>] ? rest_init+0x10e/0x10e
[    1.377754] Code: 89 fa e8 71 c5 b7 ff 8b 4e 04 89 fa 89 d8 e8 8e c6 b7 ff 8d 43 2c 89 45 d4 8b 43 30 8d 4b 2c 89 45 e8 89 7b 30 89 4d e4 8b 55 dc <89> 38 8d 43 3c 89 75 ec e8 c9 dd b7 ff eb 0c 31 c0 87 03 48
+75
[    1.380442] EIP: [<c14db9ad>] mutex_lock_nested+0x11f/0x2c3 SS:ESP 0068:d28dbec0
[    1.381174] CR2: 0000000000000000

when loading the non-modesetting vGEM module. To prevent use of the
uninitialised dev->mode_config from drm_dev_register() we move the
drm_connector_register_all() under a DRIVER_MODESET guard. Longer term,
we probably want to initialise the embedded dev->mode_config automatically
from drm_dev_init() for all DRIVER_MODESET drivers.

v2: Also protect drm_dev_unregister.

Fixes: e28cd4d0a223 ("drm: Automatically register/unregister all connectors")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Testcase: igt/vgem_reload_basic
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466257601-5656-1-git-send-email-chris@chris-wilson.co.uk
(cherry picked from commit bee7fb158f40c4ab27af352d5e9826ef2b9f4432)

Change-Id: I5387cd16d163573dcb14028be5234da12fb0cdab
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>

UPSTREAM: drm: Automatically register/unregister all connectors

As the drm_connector is now safe for multiple calls to
register/unregister, automatically perform a registration on all known
connectors drm drv_register (and unregister from drm_drv_unregister).
Drivers can still call drm_connector_register() and
drm_connector_unregister() individually, or defer as required.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466151923-1572-2-git-send-email-chris@chris-wilson.co.uk
(cherry picked from commit e28cd4d0a223e1bcea616326e2281900e7e7e9a2)

Change-Id: I30a4e2e65a88e824597774f8c59671fcf4cd0384
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>

UPSTREAM: drm: Introduce drm_connector_register_all() helper

As a pair to already existing drm_connector_unregister_all() we're adding
generic implementation of what is already done in some drivers.

Once this helper is implemented we'll be ready to switch existing
driver-specific implementations with the generic one.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461068693-11260-2-git-send-email-abrodkin@synopsys.com
(cherry-pick from commit 54d2c2da0946368b96b63e6daed7920f3681243e)

Change-Id: Ibfeeebe5d02b77b9a670f7c303417a8d20677376
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>

UPSTREAM: drm: Rename drm_connector_unplug_all() to drm_connector_unregister_all()

Current name is a bit misleading because what that helper function
really does it calls drm_connector_unregister() for all connectors.

This all has nothing to do with hotplugging so let's name things
properly.

And while at it remove potentially dangerous locking around
drm_connector_unregister() in rcar_du_remove() as mentioned
in kerneldoc for drm_connector_unregister_all().

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: linux-renesas-soc@vger.kernel.org
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1458722577-20283-2-git-send-email-abrodkin@synopsys.com
(cherry-pick from commit 6c87e5c3ec6db052f3744804a517b6fb003906e1)

Change-Id: I42a56d8d2b8bef8f062ca9ecc478d0348e738ea7
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>

UPSTREAM: drm: Add a callback from connector registering

If a driver wants to more precisely control its initialisation and in
particular, defer registering its interfaces with userspace until after
everything is setup, it also needs to defer registering the connectors.
As some devices need more work during registration, add a callback so
that drivers can do additional work if required for a connector.

Correspondingly, we also require an unregister callback.

Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[danvet: go ocd and remvoe unecessary empty kerneldoc line.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465993109-19523-3-git-send-email-chris@chris-wilson.co.uk
(cherry-pick from commit aaf285e2e0ff490e924dbcdfd08e8274c3093354)

Change-Id: Ifb7513fb7eea2293d0f3705c0c00923c5f7fde0c
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

arm64: dts: rk3399: dual display for hdmi and dp

hdmi connect vopb and dp connect vopl

Change-Id: Ib6a4771ab86ebe5dbfc21d1401e6768bcac7d36b
Signed-off-by: xubilv <xbl@rock-chips.com>

arm64: dts: rockchip: Add rk3399 box dts for drm

Change-Id: I7a518826c7d6701dc68f2eb5cca629f82fb92365
Signed-off-by: Zhangbin Tong <zebulun.tong@rock-chips.com>

ARM64: dts: rk3399: support for box rev2

rk3399 box rev1 and rev2 use gpio control for enable/disable vdd_cpu_b
rev1 use GPIO1_C1(default pull-down), rev2 use GPIO_C2(default pull-up)

Change-Id: I9ddbcff688905386d2d52f680cbb5f93d6c8d526
Signed-off-by: Zhangbin Tong <zebulun.tong@rock-chips.com>

MALI: midgard: RK: manual define configs

otherwise it won't defined since we don't include it in kconfig

Change-Id: I6886068f89d53f3ecf47846ed7435131fdd7960f
Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>

arm: dts: correct cpu opp point for rk3288

Change-Id: I7f0a6cfe68d91faee492ceac4fb2e02827205317
Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>

MALI: midgard: RK: add separate src dir of Midgard driver for RK Linux device

The version of Midgard DDK used in RK Linux device is different from the one
used in Android platforms.
It might be convenient to have a separate src directory for it.

The new directory drivers/gpu/arm/midgard_for_linux is copied from
drivers/gpu/arm/midgard of commit 206f372ede.
It's on DDK r9p0-05rel0
There are also a few modifications in some 'Kbuild' files.

A new config MALI_MIDGARD_FOR_LINUX is introduced to specify which directory
of Midgard to use.
If defined, kbuild will compile src files under
drivers/gpu/arm/midgard_for_rk_linux_device,
otherwise, drivers/gpu/arm/midgard.

There is already a source directory of Midgard driver,
the 'Kconfig' file of the new directory is not be involved
in kconfig process.
Otherwise, there are problems caused by configs
with the same names in the two directories.
So, "midgard_for_rk_linux_device" could not be configured via menuconfig.

In the new directory, all the default configs are defined in default_config.mk.
'Kbuild' files include it.

Change-Id: I54f61cc50f7a168a742db7a11c6b6eebe21528f8
Signed-off-by: chenzhen <chenzhen@rock-chips.com>
Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>

ARM64: dts: rk3399-box: Use gpio control for enable/disable of syr82x buck

Change-Id: I9e03084c93ffff5d8ea79ed037656ce8d6615226
Signed-off-by: Zhangbin Tong <zebulun.tong@rock-chips.com>

ARM64: dts: rk3399-tve1205g: retain battery led state in suspend

Change-Id: Ie605d3d3e0275812f5a360bbcd533c8b954a9159
Signed-off-by: Zhou weixin <zwx@rock-chips.com>

HID: i2c-hid: do not reset hid if device support wakeup when resume

The host will trigger the hid interrupt to after reset hid, then send
wakeup key to light up screen,so any wakeupirq source will light up
screen due to reset hid in resume, and hid hwreset is not necessary.

Change-Id: I920239eeb4b57b0f594cc67cb8f4c1649c5125bd
Signed-off-by: Zhou weixin <zwx@rock-chips.com>

arm64: rockchip_cros_defconfig: enable cdn dp machine driver

Change-Id: Ia4755126ca13c8c389a498a0c87e66d6357888b6
Signed-off-by: Chris Zhong <zyw@rock-chips.com>

arm64: dts: rockchip: enable cdn dp machine driver for rk3399-evb-cros

Change-Id: I97bebe09b83d5a3d9a964cf7dbaf63dbb11daffb
Signed-off-by: Chris Zhong <zyw@rock-chips.com>

ASoC: rockchip: Add machine driver for cdn DP

Change-Id: Id5fe7eee2bf1e73103d71f61a2b98aeaf0ea48b1
Signed-off-by: Chris Zhong <zyw@rock-chips.com>

video: rockchip: mipi-dsi: Dynamic allocation command buf size

Change-Id: Ieb2ce472dc137ecf83f588e68b5e747dcbca3a20
Signed-off-by: Xubilv <xbl@rock-chips.com>

ion: reorder pages for scatterlist

Change-Id: I3a25eba9d65ac1345471321f61ae9d7a959a1be6
Signed-off-by: Simon <xxm@rock-chips.com>

input: touchscreen: fix tp gslx680 irq number bug

Change-Id: Ic0addb0064dea5ef86741119557fd4945d1aed13
Signed-off-by: Wu Liangqing <wlq@rock-chips.com>

video: hdmi: remove unuse dp timing for Rk3399 disvr

Change-Id: I783b4b7b3cdfad321b8c5bed2ce9b80fecbb3688
Signed-off-by: wjh <wjh@rock-chips.com>

phy: rockchip-inno-usb2: select USB_COMMON

When USB is disabled, we get a link error for this driver
because of the added OTG support

drivers/phy/phy-rockchip-inno-usb2.o: In function `rockchip_usb2phy_otg_sm_work':
phy-rockchip-inno-usb2.c:(.text.rockchip_usb2phy_otg_sm_work+0x1f4): undefined reference to `usb_otg_state_string'
drivers/phy/phy-rockchip-inno-usb2.o: In function `rockchip_usb2phy_probe':
phy-rockchip-inno-usb2.c:(.text.rockchip_usb2phy_probe+0x2c8): undefined reference to `of_usb_get_dr_mode_by_phy'

Other phy drivers select USB_COMMON for this, so let's do the same
here.

Change-Id: I088b5862157d35360a30f21c8ed56a2a85792d53
Fixes: 0c42fe48fd23 ("phy: rockchip-inno-usb2: support otg-port for rk3399")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: William Wu <wulf@rock-chips.com>

phy: rockchip-inno-usb2: add COMMON_CLK dependency

On kernel builds without COMMON_CLK, the newly added rockchip-inno-usb2
driver fails to build:

drivers/phy/phy-rockchip-inno-usb2.c:124:16: error: field 'clk480m_hw'
has incomplete type
   struct clk_hw clk480m_hw;

In file included from include/linux/clk.h:16:0
                 from drivers/phy/phy-rockchip-inno-usb2.c:17:
include/linux/kernel.h:831:48: error: initialization from incompatible
pointer type [-Werror=incompatible-pointer-types]
   const typeof( ((type *)0)->member ) *__mptr = (ptr); \

  ... ...

Change-Id: I951d89ee34625dea5dfc6eeca841f9a5c44bc951
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: William Wu <wulf@rock-chips.com>

phy: rockchip-inno-usb2: correct 480MHz output clock stable time

We found that the system crashed due to 480MHz output clock of
USB2 PHY was unstable after clock had been enabled by gpu module.

Theoretically, 1 millisecond is a critical value for 480MHz
output clock stable time, so we try to change the delay time
to 1.2 millisecond to avoid this issue.

And the commit ed907fb1d7c3 ("phy: rockchip-inno-usb2: correct
clk_ops callback") used prepare callbacks instead of enable
callbacks to support gate a clk if the operation may sleep. So
we can switch from delay to sleep functions.

Also fix a spelling error from "waitting" to "waiting".

Change-Id: Ie9883e5e9a3f0c2edec9d259b844ca536348c9cf
Signed-off-by: William Wu <wulf@rock-chips.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

phy: rockchip-inno-usb2: correct clk_ops callback

Since we needs to delay ~1ms to wait for 480MHz output clock
of USB2 PHY to become stable after turn on it, the delay time
is pretty long for something that's supposed to be "atomic"
like a clk_enable(). Consider that clk_enable() will disable
interrupt and that a 1ms interrupt latency is not sensible.

The 480MHz output clock should be handled in prepare callbacks
which support gate a clk if the operation may sleep.

Change-Id: I943e17f8a97d1229fefd8c1ada706e0c450c98eb
Signed-off-by: William Wu <wulf@rock-chips.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

arm64: configs: add vpu related config for rk3399 linux

Change-Id: I599940d16b7e3f9777221f31d1bca4f9e4e206e4
Signed-off-by: WeiYong Bi <bivvy.bi@rock-chips.com>

net: rkwifi: enable CONFIG_BCMDHD_AG=y by default

Change-Id: Ibe8c13252a134672f4cdaa1c62d82092378b2eb5
Signed-off-by: huweiguo <hwg@rock-chips.com>

ARM: dts: rk3288: use operating-points-v2

Change-Id: I3cb938fbfaf0ae5957d4832f4ad5671ab9631409
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>

video/rockchip: fix rga2 get version from reg

Change-Id: Ia960791f8346a132389cb7f43f0f7ff801465abc
Signed-off-by: Zikim,Wei <wzq@rock-chips.com>

arm64: dts: rk3399-tve1205g: deploy audio configurations

Change-Id: I41ebc8a11c74536ed51720c07fbfe1817342907d
Signed-off-by: zhangjun <zhangjun@rock-chips.com>

arm64: dts: rockchip: add usb camera pd pin control for rk3399-tve1205g

Change-Id: Iee039f3085832861dee5a99da2cbbbec2a08f509
Signed-off-by: Bin Yang <yangbin@rock-chips.com>

arm64: rockchip_defconfig: add usb camera pd pin control support

Change-Id: If7542a913eab0e36c586005d5bcfbb2b9cabb5d7
Signed-off-by: Bin Yang <yangbin@rock-chips.com>

misc: add usb camera pd pin control driver

Change-Id: Id6ad835c2fff43167a52f90c19e7e6dfe93a4655
Signed-off-by: Bin Yang <yangbin@rock-chips.com>

ASoC: rockchip: i2s: add support for i2s bclk fs configuration

this patch add support for i2s bclk fs configuration, we can
configure bclk_fs by devicetree as required.

Change-Id: I7e034e0466793b5b9eab6566a43e90213f219bb0
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>

video: rockchip: dp: fix dp connected issue which caused by hpd signal.

some device will triggered hpd after dp is connected, so we don't do
traning if dp lanes is not changed.

Change-Id: I3e329e7d2db33138f283ad6584b966ebd0619f65
Signed-off-by: wenping.zhang <wenping.zhang@rock-chips.com>

usb: dwc3: rockchip: support to set testmodes via debugfs

This patch create host_testmode file in debugfs for
USB HOST. It's useful for us to use a scope to verify
signal integrity for USB2/USB3 HOST.

For example， set testmodes for RK3399 board USB:
1. set Test packet for Type-C0 USB2 HOST:
   echo test_packet > /sys/kernel/debug/usb@fe800000/host_testmode

2. set compliance mode for Type-C0 USB3 HOST normal orientation:
   echo test_u3 > /sys/kernel/debug/usb@fe800000/host_testmode

3. set compliance mode for Type-C0 USB3 HOST flip orientation:
   echo test_flip_u3 > /sys/kernel/debug/usb@fe800000/host_testmode

4. check the testmode status:
   cat /sys/kernel/debug/usb@fe800000/host_testmode

   The log maybe like this:
   U2: test_packet     /* means that U2 in test mode */
   U3: compliance mode /* means that U3 in test mode */

Change-Id: Ic7e464b0443c792848846246b782ffba30bf2120
Signed-off-by: William Wu <wulf@rock-chips.com>

PM / AVS: rockchip-cpu-avs: use a new way to get cluster id

The returned value of topology_physical_package_id is socket id
on ARM32 system(for example, RK3288), it's not like the cluster id
on ARM64 system(for example, RK3366), so use a new way.

Change-Id: I5b2cdfdcdaa56c71df394caa2588f6e83931a293
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>

UPSTREAM: cpufreq: Send START policy notification after sending CREATE

The sequence got a bit wrong as we are sending CPUFREQ_START
notifications even before we have sent CPUFREQ_CREATE_POLICY.

Fix it.

Change-Id: I7d1fba317314bb5e5601b1354494398def156424
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
(cherry picked from commit 388612baba201bdcedfa66782f524dcc507d9f12)

arm64: dts: rockchip: rk3366: add cpu avs node

Change-Id: I7d984bf44e04d205c243eb2012cd06ba7c7fe548
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>

ARM64: dts: rk3399-tve1205g: host state notify ec module through gpio

Change-Id: I3716de0618394de010000a0497de1b3c83cd88ab
Signed-off-by: Shunqing Chen <csq@rock-chips.com>

power: host state notify ec module through gpio

Change-Id: I6b1401c6959a05fce1d6d7ca7a5fb581782fd30d
Signed-off-by: Shunqing Chen <csq@rock-chips.com>

mfd: fusb302: fix fusb302 disconnect error.

shift the time of vbus enable before attach debounce started,
and merge the code of get_cc from chrome ec driver, which used
to fix connection disconnected issue.

Change-Id: I2fd1f83d0265b3770d75a59d622d0f650d737c5b
Signed-off-by: wenping.zhang <wenping.zhang@rock-chips.com>

net: rkwifi: enable GET_CUSTOM_MAC_ENABLE

Change-Id: I8ea15be317e4bbe1d9cf0834e42536fc4dc4b9d7
Signed-off-by: huweiguo <hwg@rock-chips.com>

arm64: dts: rockchip: rk3399: Rename OPP nodes as opp@<opp-hz>

It would be better to name OPP nodes as opp@<opp-hz> as that will ensure
that multiple DT nodes don't contain the same frequency. Of course we
expect the writer to name the node with its opp-hz frequency and not any
other frequency.

And that will let the compile error out if multiple nodes are using the
same opp-hz frequency.

Change-Id: I8c77646329e39390fb135d4d75d34893a8168876
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>

arm64: dts: rk3399: modify opp table according to latest chips

Change-Id: I2a1b5fac74617cf57a5655411f0326800a6a990d
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>

arm64: dts: rockchip: support use drm on rk3399 excavator linux

1. fixup edp enable gpio.
2. add backlight enable gpio.
3. enable route_edp node.

Change-Id: I4b4792abe3c8eb7dba0c2f5c0d3ddffff74478d1
Signed-off-by: WeiYong Bi <bivvy.bi@rock-chips.com>

arm64: dts: rk3399_linux: support use drm on rk3399 linux

Change-Id: I9b248af7d86d34a669219fbe62a195ee2b49e516
Signed-off-by: WeiYong Bi <bivvy.bi@rock-chips.com>

net: rfkill-wlan: prior to use wifi addr store in vendor storage

Change-Id: I32ef43e1f47ee658675b26d54fa834ae9362382f
Signed-off-by: huweiguo <hwg@rock-chips.com>

ARM64: dts: rockchip: add power domain node for RK3328 Soc

add pd node for RK3328 Soc
create power domain tree

Change-Id: I0ef5729d397105a7992cb4b7440cdc2b251bd1af
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>

arm64: dts: rk3399-android: add core reset for dp.

Change-Id: I7c86cfbf28cb278bcadebbb08ba31a8b81bdd290
Signed-off-by: wenping.zhang <wenping.zhang@rock-chips.com>

video: rockchip: dp: fix dp fw load error.

Do dptx/apb/core reset on every dp clock enabling, otherwise dp
will fail to load the firmware sometimes.

Change-Id: Ied0caad99d865ec86162dead2b4769a53f8db12a
Signed-off-by: wenping.zhang <wenping.zhang@rock-chips.com>

arm64: dts: rockchip: support use vpu on rk3399 excavator linux

Change-Id: I5ea28cd4539140a149f1725a1622fd1dcae3e020
Signed-off-by: WeiYong Bi <bivvy.bi@rock-chips.com>

drm/rockchip: gem: add mutex lock for drm mm

drm_mm_insert_node_generic and drm_mm_remove_node may access same
resource with list ops, it's not threads safe, so protect this context
with mutex lock.

Fix bug:
[49451.856244] ==================================================================
[49451.856350] BUG: KASAN: wild-memory-access on address dead000000000108
[49451.856379] Write of size 8 by task Binder:218_4/683
[49451.856417] CPU: 2 PID: 683 Comm: Binder:218_4 Not tainted 4.4.36 #62
[49451.856443] Hardware name: Rockchip RK3399 Excavator Board edp (Android) (DT)
[49451.856469] Call trace:
[49451.856519] [<ffffff900808a9d0>] dump_backtrace+0x0/0x230
[49451.856556] [<ffffff900808ac14>] show_stack+0x14/0x1c
[49451.856592] [<ffffff90084a4de0>] dump_stack+0xa0/0xc8
[49451.856633] [<ffffff900821b700>] kasan_report+0x110/0x4dc
[49451.856670] [<ffffff900821aa84>] __asan_store8+0x24/0x7c
[49451.856715] [<ffffff90086158c4>] drm_mm_insert_node_generic+0x2dc/0x464
[49451.856760] [<ffffff90086406a8>] rockchip_gem_iommu_map+0x60/0x158
[49451.856794] [<ffffff9008640bb4>] rockchip_gem_create_object+0x278/0x488
[49451.856827] [<ffffff9008641020>] rockchip_gem_create_with_handle+0x24/0x10c
[49451.856862] [<ffffff9008641364>] rockchip_gem_create_ioctl+0x3c/0x50
[49451.856896] [<ffffff900860aee4>] drm_ioctl+0x354/0x52c
[49451.856939] [<ffffff900823d948>] do_vfs_ioctl+0x670/0x78c
[49451.856976] [<ffffff900823dac4>] SyS_ioctl+0x60/0x88
[49451.857009] [<ffffff9008082ef0>] el0_svc_naked+0x24/0x28

Change-Id: I2ea377aa9ca24f70c59e2d86f2a6ad5ccb9c0891
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>

ARM64: dts: rk3399-tve1205g: add wakeup support for hid keyboard

Change-Id: I21d0f6dac30f64b90c68f98c11c0cc7012e2b1b6
Signed-off-by: Zhou weixin <zwx@rock-chips.com>

HID: i2c-hid: add support wakeup

Change-Id: I15890509ff5983e1a8adaa48b28391ec67de8bb5
Signed-off-by: Zhou weixin <zwx@rock-chips.com>

ethernet: rockchip: get and save eth addr in vendor storage

Change-Id: I83d8bc81ca8d33e6f2575d0d90a3dc5978500a64
Signed-off-by: huweiguo <hwg@rock-chips.com>

input: keyboard: rk_keys: add rk_keys.h

Make sure drivers work if rk_keys do not selected.

Change-Id: I2882e6c69f0ddbff54089f824be33964ded3cb2e
Signed-off-by: Huang, Tao <huangtao@rock-chips.com>

rk: rm drivers/clk/rk

Change-Id: I8c541c0edb446a285ca5097b597216635e755460
Signed-off-by: Huang, Tao <huangtao@rock-chips.com>

camera: rockchip: camsys driver v0.0x21.9

Change-Id: I371f3bfc1e6276407bb9481f4a7897d4955903ba
Signed-off-by: dalong.zhang <dalon.zhang@rock-chips.com>

soc: rockchip: reboot-mode: rename BOOT_LOADER to BOOT_BL_DOWNLOAD

Same as upstream.

Change-Id: Id9042d288bdbac2fede7da4aee13cc7a32609d6d
Signed-off-by: Huang, Tao <huangtao@rock-chips.com>

arm64: dts: rockchip: move vpu/rkvdec to rk3399.dtsi

Right now only one driver support vpu and rkvdec,
so move the nodes from rk3399-android[-next].dtsi to rk3399.dtsi.

Change-Id: Id908843774ed8eede3aeddb24059ae92a35e5b98
Signed-off-by: Huang, Tao <huangtao@rock-chips.com>

arm64: rockchip_defconfig: enable EC_BATTERY

Change-Id: I7f467608e6d366b8839dc171ad98c928fe3ed788
Signed-off-by: Shunqing Chen <csq@rock-chips.com>

soc: rockchip: power-domain: Modify power domain driver for rk3328

This driver is modified to support RK3328 SoC.
RK3328 SoC is only support idle.
add DOMAIN_M type, for support regs have write_enable bit.

Change-Id: I5780b7bab680ddd9d9480e19d7c49681dd571d27
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>

dt-bindings: add binding for rk3328 power domains

Add binding documentation for the power domains
found on Rockchip RK3328 SoCs.
But RK3328 SoC just support idle, not support pd.

Change-Id: I331680b2e91a45fd09f4bdab7ff9fd3990cb35c4
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>

dt/bindings: power: add RK3328 SoCs header for idle-request

According to a description from TRM, add all the idle request.

Change-Id: Ia2fdb20d89f7e668a3c86074ebed8c73ab0a9429
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>

power: add ec battery driver

Change-Id: I7b1b0087a9ec361ec322a34b4caefc71a51bd2c9
Signed-off-by: Shunqing Chen <csq@rock-chips.com>

drivers: soc: rockchip: fix vendor storage write issue

Change-Id: I65bf5896ac8cf792c400755fc62e3e433209891d
Signed-off-by: Zhaoyifeng <zyf@rock-chips.com>

ARM64: dts: rk3399-tve1205g: add leds gpio control

Change-Id: I89b0c1a2ee631b133f81494063b6cb4a57a1daca
Signed-off-by: Zhou weixin <zwx@rock-chips.com>

soc: rockchip: rename rockchip_boot-mode.h to rockchip,boot-mode.h

Same as upstream.

Change-Id: Ic1887e5cf808ebf214168b51683dec25880f0dac
Signed-off-by: Huang, Tao <huangtao@rock-chips.com>

ASoC: es8316: fix null pointer error

due to function will be called from rk_headset_irq_hook_adc.c
when es8316 configured in defconfig file but not in device tree

Change-Id: Ie0294fff2c05b9f77c6740d81dc9445007c1b62b
Signed-off-by: zhangjun <zhangjun@rock-chips.com>

arm64: rockchip_defconfig: enable cx2072x

Change-Id: If2aaec6ffd360033f911ac2e5e2d3bd575dfdcb1
Signed-off-by: zhangjun <zhangjun@rock-chips.com>

NVMe: don't try to read csts when failing to reset it

We could find the external abort for trying to access
nvme's BAR space to check the csts, but it's possible
that the link state is forbidden to access the BAR when
failing to reset it. So we should reuse the former csts
to print the log instead of doing that again.

Change-Id: I34438a726381e588eb21149b1aab76a66ef0e665
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>

usb: dwc3: redo the mode setting at core init

When dwc3 core enters into suspend mode, the PD may turn off
for power saving, which will cause dwc3 controller lost the
mode operation when resuming time.

This adds redo the mode setting into dwc3_core_init() function
to avoid this issue.

BUG=Redmine: Defect#110481
TEST=rk3399-sapphire-excavator-box(CVTE), check if USB3.0 HUB
can be enumerated after PM resume.

Change-Id: I61c512e9c368afc665cd4d5900367079ed22a34e
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>

phy: rockchip-inno-usb2: rm phy_power_on/off in suspend/resume cases.

Usb-controller can invoke phy_power_on/off in its suspend/resume
process, so usb-phy need not do it again.

This adds remove phy_power_on/off in its suspend/resume cases.

Change-Id: Ice30e79ffba8116ca9bfae344c7ea232f6580130
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>

usb: dwc3: rockchip: power off usb2 phy in suspend

DWC3 use extcon notifier to manage USB cable detection
and mode switch. For host mode, if USB device connected,
it requires to reset the whole DWC3 controller to make
sure that pipe power state in P2 before power on USB3 PHY,
after do DWC3 reset we will do phy power on in extcon evt
work, however, the DWC3 core will do phy power on again
in runtime resume process (dwc3_runtime_resume() ->
dwc3_core_init() -> phy_power_on()). This will cause PHY
power off failure during suspend because we just do once
phy power off in suspend(dwc3_suspend() -> dwc3_core_exit()
-> phy_power_off()).

This patch does phy power off in suspend to make sure that
USB2 PHY enter suspend in HOST mode. And because USB3 PHY
power on operation need to be done while the pipe is in P2
state, but after resume the pipe is in P0 state, so we just
put USB3 PHY in power on state.

Change-Id: I643ba0abeb015be9285fd29d59fa0e006131c39b
Signed-off-by: William Wu <wulf@rock-chips.com>

arm64: dts: rockchip: keep vbus always on for usb2.0 host of rk3399

One basic condition of usb remote wakeup is vbus on, so we add
regulator-always-on property for vcc5v0_host regulator in this adds.

In the previous codes, ehci/ohci-platform did not power off
vcc5v0_host regulator due to some oddish codes, and we have fixed it
at commit b5a0a9e8794d.

Change-Id: I95c225c9c3aeec6e346d62e61fdcde5e5e02d143
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>

arm64: rockchip_cros_defconfig: enable Type-C PHY and DP config

Change-Id: Iac8930ad5c229e385889fa8b042973730a5aea2b
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>

ASoC: Add driver for codec cx2072x

Change-Id: I9a0eb611a4e0d861b7d47d4944b93203f823738b
Signed-off-by: zhangjun <zhangjun@rock-chips.com>

arm64: dts: rockchip: modify logo-mode as center for rk3399 mid

Change-Id: I529a1063efd6475d49f6eb738e4612cfb711ced1
Signed-off-by: Hao Xiaowei <hxw@rock-chips.com>

video: rockchip: vcodec: add log message in iommu drm

Change-Id: If66e7654d87c790977378630824d582f2f4c4ffa
Signed-off-by: Jung Zhao <jung.zhao@rock-chips.com>

video: rockchip: vcodec: add buffer recycle mechanism in vpu

when info change, vpu driver doesn't know when to release
buffers. with this mechanism, vpu driver will auto release
when buffer nums bigger than BUFFER_LIST_MAX_NUMS.

Change-Id: Id4fb91257d260bfd2e18388731941c4f0cc191b0
Signed-off-by: Jung Zhao <jung.zhao@rock-chips.com>

video: rockchip: vcodec: fix fd import error

Since fd will be reused even if dma buffer doesn't release,
this will cause output buffer error when use usb camera
with mjpeg or h264 format.

Change-Id: I2baeb2c5d9127df0a0eb362b8c577c05ceca470d
Signed-off-by: Jung Zhao <jung.zhao@rock-chips.com>

arm64: dts: rockchip: enable cdn-dp for rk3399-evb-cros

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Change-Id: I7f86533a5890edd1fc113bf9553764ab3dee7640