.atomic_destroy_state = tegra_crtc_atomic_destroy_state,
};
-static void tegra_dc_stop(struct tegra_dc *dc)
-{
- u32 value;
-
- /* stop the display controller */
- value = tegra_dc_readl(dc, DC_CMD_DISPLAY_COMMAND);
- value &= ~DISP_CTRL_MODE_MASK;
- tegra_dc_writel(dc, value, DC_CMD_DISPLAY_COMMAND);
-
- tegra_dc_commit(dc);
-}
-
-static bool tegra_dc_idle(struct tegra_dc *dc)
-{
- u32 value;
-
- value = tegra_dc_readl_active(dc, DC_CMD_DISPLAY_COMMAND);
-
- return (value & DISP_CTRL_MODE_MASK) == 0;
-}
-
-static int tegra_dc_wait_idle(struct tegra_dc *dc, unsigned long timeout)
-{
- timeout = jiffies + msecs_to_jiffies(timeout);
-
- while (time_before(jiffies, timeout)) {
- if (tegra_dc_idle(dc))
- return 0;
-
- usleep_range(1000, 2000);
- }
-
- dev_dbg(dc->dev, "timeout waiting for DC to become idle\n");
- return -ETIMEDOUT;
-}
-
-static void tegra_crtc_disable(struct drm_crtc *crtc)
-{
- struct tegra_dc *dc = to_tegra_dc(crtc);
- u32 value;
-
- if (!tegra_dc_idle(dc)) {
- tegra_dc_stop(dc);
-
- /*
- * Ignore the return value, there isn't anything useful to do
- * in case this fails.
- */
- tegra_dc_wait_idle(dc, 100);
- }
-
- /*
- * This should really be part of the RGB encoder driver, but clearing
- * these bits has the side-effect of stopping the display controller.
- * When that happens no VBLANK interrupts will be raised. At the same
- * time the encoder is disabled before the display controller, so the
- * above code is always going to timeout waiting for the controller
- * to go idle.
- *
- * Given the close coupling between the RGB encoder and the display
- * controller doing it here is still kind of okay. None of the other
- * encoder drivers require these bits to be cleared.
- *
- * XXX: Perhaps given that the display controller is switched off at
- * this point anyway maybe clearing these bits isn't even useful for
- * the RGB encoder?
- */
- if (dc->rgb) {
- value = tegra_dc_readl(dc, DC_CMD_DISPLAY_POWER_CONTROL);
- value &= ~(PW0_ENABLE | PW1_ENABLE | PW2_ENABLE | PW3_ENABLE |
- PW4_ENABLE | PM0_ENABLE | PM1_ENABLE);
- tegra_dc_writel(dc, value, DC_CMD_DISPLAY_POWER_CONTROL);
- }
-
- tegra_dc_stats_reset(&dc->stats);
- drm_crtc_vblank_off(crtc);
-}
-
-static bool tegra_crtc_mode_fixup(struct drm_crtc *crtc,
- const struct drm_display_mode *mode,
- struct drm_display_mode *adjusted)
-{
- return true;
-}
-
static int tegra_dc_set_timings(struct tegra_dc *dc,
struct drm_display_mode *mode)
{
tegra_dc_writel(dc, value, DC_DISP_DISP_CLOCK_CONTROL);
}
-static void tegra_crtc_mode_set_nofb(struct drm_crtc *crtc)
+static void tegra_dc_stop(struct tegra_dc *dc)
+{
+ u32 value;
+
+ /* stop the display controller */
+ value = tegra_dc_readl(dc, DC_CMD_DISPLAY_COMMAND);
+ value &= ~DISP_CTRL_MODE_MASK;
+ tegra_dc_writel(dc, value, DC_CMD_DISPLAY_COMMAND);
+
+ tegra_dc_commit(dc);
+}
+
+static bool tegra_dc_idle(struct tegra_dc *dc)
+{
+ u32 value;
+
+ value = tegra_dc_readl_active(dc, DC_CMD_DISPLAY_COMMAND);
+
+ return (value & DISP_CTRL_MODE_MASK) == 0;
+}
+
+static int tegra_dc_wait_idle(struct tegra_dc *dc, unsigned long timeout)
+{
+ timeout = jiffies + msecs_to_jiffies(timeout);
+
+ while (time_before(jiffies, timeout)) {
+ if (tegra_dc_idle(dc))
+ return 0;
+
+ usleep_range(1000, 2000);
+ }
+
+ dev_dbg(dc->dev, "timeout waiting for DC to become idle\n");
+ return -ETIMEDOUT;
+}
+
+static void tegra_crtc_disable(struct drm_crtc *crtc)
+{
+ struct tegra_dc *dc = to_tegra_dc(crtc);
+ u32 value;
+
+ if (!tegra_dc_idle(dc)) {
+ tegra_dc_stop(dc);
+
+ /*
+ * Ignore the return value, there isn't anything useful to do
+ * in case this fails.
+ */
+ tegra_dc_wait_idle(dc, 100);
+ }
+
+ /*
+ * This should really be part of the RGB encoder driver, but clearing
+ * these bits has the side-effect of stopping the display controller.
+ * When that happens no VBLANK interrupts will be raised. At the same
+ * time the encoder is disabled before the display controller, so the
+ * above code is always going to timeout waiting for the controller
+ * to go idle.
+ *
+ * Given the close coupling between the RGB encoder and the display
+ * controller doing it here is still kind of okay. None of the other
+ * encoder drivers require these bits to be cleared.
+ *
+ * XXX: Perhaps given that the display controller is switched off at
+ * this point anyway maybe clearing these bits isn't even useful for
+ * the RGB encoder?
+ */
+ if (dc->rgb) {
+ value = tegra_dc_readl(dc, DC_CMD_DISPLAY_POWER_CONTROL);
+ value &= ~(PW0_ENABLE | PW1_ENABLE | PW2_ENABLE | PW3_ENABLE |
+ PW4_ENABLE | PM0_ENABLE | PM1_ENABLE);
+ tegra_dc_writel(dc, value, DC_CMD_DISPLAY_POWER_CONTROL);
+ }
+
+ tegra_dc_stats_reset(&dc->stats);
+ drm_crtc_vblank_off(crtc);
+}
+
+static void tegra_crtc_enable(struct drm_crtc *crtc)
{
struct drm_display_mode *mode = &crtc->state->adjusted_mode;
struct tegra_dc_state *state = to_dc_state(crtc->state);
tegra_dc_writel(dc, value, DC_CMD_DISPLAY_POWER_CONTROL);
tegra_dc_commit(dc);
-}
-static void tegra_crtc_prepare(struct drm_crtc *crtc)
-{
- drm_crtc_vblank_off(crtc);
-}
-
-static void tegra_crtc_commit(struct drm_crtc *crtc)
-{
drm_crtc_vblank_on(crtc);
}
static const struct drm_crtc_helper_funcs tegra_crtc_helper_funcs = {
.disable = tegra_crtc_disable,
- .mode_fixup = tegra_crtc_mode_fixup,
- .mode_set_nofb = tegra_crtc_mode_set_nofb,
- .prepare = tegra_crtc_prepare,
- .commit = tegra_crtc_commit,
+ .enable = tegra_crtc_enable,
.atomic_check = tegra_crtc_atomic_check,
.atomic_begin = tegra_crtc_atomic_begin,
.atomic_flush = tegra_crtc_atomic_flush,
{
struct drm_info_node *node = s->private;
struct tegra_dc *dc = node->info_ent->data;
+ int err = 0;
+
+ drm_modeset_lock_crtc(&dc->base, NULL);
+
+ if (!dc->base.state->active) {
+ err = -EBUSY;
+ goto unlock;
+ }
#define DUMP_REG(name) \
seq_printf(s, "%-40s %#05x %08x\n", #name, name, \
#undef DUMP_REG
- return 0;
+unlock:
+ drm_modeset_unlock_crtc(&dc->base);
+ return err;
}
static int tegra_dc_show_crc(struct seq_file *s, void *data)
{
struct drm_info_node *node = s->private;
struct tegra_dc *dc = node->info_ent->data;
+ int err = 0;
u32 value;
+ drm_modeset_lock_crtc(&dc->base, NULL);
+
+ if (!dc->base.state->active) {
+ err = -EBUSY;
+ goto unlock;
+ }
+
value = DC_COM_CRC_CONTROL_ACTIVE_DATA | DC_COM_CRC_CONTROL_ENABLE;
tegra_dc_writel(dc, value, DC_COM_CRC_CONTROL);
tegra_dc_commit(dc);
tegra_dc_writel(dc, 0, DC_COM_CRC_CONTROL);
- return 0;
+unlock:
+ drm_modeset_unlock_crtc(&dc->base);
+ return err;
}
static int tegra_dc_show_stats(struct seq_file *s, void *data)
projects / firefly-linux-kernel-4.4.55.git / commitdiff