// instruction. This will generate a udiv in the process, and Builder's insert
// point will be pointing at the udiv (if present, i.e. not folded), ready to be
// expanded if the user wishes.
-static Value* GenerateSignedDivisionCode(Value* Dividend, Value* Divisor,
- IRBuilder<>& Builder) {
+static Value *GenerateSignedDivisionCode(Value *Dividend, Value *Divisor,
+ IRBuilder<> &Builder) {
// Implementation taken from compiler-rt's __divsi3
- ConstantInt* ThirtyOne = Builder.getInt32(31);
+ ConstantInt *ThirtyOne = Builder.getInt32(31);
// ; %tmp = ashr i32 %dividend, 31
// ; %tmp1 = ashr i32 %divisor, 31
// ; %q_mag = udiv i32 %u_dvnd, %u_dvsr
// ; %tmp4 = xor i32 %q_mag, %q_sgn
// ; %q = sub i32 %tmp4, %q_sgn
- Value* Tmp = Builder.CreateAShr(Dividend, ThirtyOne);
- Value* Tmp1 = Builder.CreateAShr(Divisor, ThirtyOne);
- Value* Tmp2 = Builder.CreateXor(Tmp, Dividend);
- Value* U_Dvnd = Builder.CreateSub(Tmp2, Tmp);
- Value* Tmp3 = Builder.CreateXor(Tmp1, Divisor);
- Value* U_Dvsr = Builder.CreateSub(Tmp3, Tmp1);
- Value* Q_Sgn = Builder.CreateXor(Tmp1, Tmp);
- Value* Q_Mag = Builder.CreateUDiv(U_Dvnd, U_Dvsr);
- Value* Tmp4 = Builder.CreateXor(Q_Mag, Q_Sgn);
- Value* Q = Builder.CreateSub(Tmp4, Q_Sgn);
+ Value *Tmp = Builder.CreateAShr(Dividend, ThirtyOne);
+ Value *Tmp1 = Builder.CreateAShr(Divisor, ThirtyOne);
+ Value *Tmp2 = Builder.CreateXor(Tmp, Dividend);
+ Value *U_Dvnd = Builder.CreateSub(Tmp2, Tmp);
+ Value *Tmp3 = Builder.CreateXor(Tmp1, Divisor);
+ Value *U_Dvsr = Builder.CreateSub(Tmp3, Tmp1);
+ Value *Q_Sgn = Builder.CreateXor(Tmp1, Tmp);
+ Value *Q_Mag = Builder.CreateUDiv(U_Dvnd, U_Dvsr);
+ Value *Tmp4 = Builder.CreateXor(Q_Mag, Q_Sgn);
+ Value *Q = Builder.CreateSub(Tmp4, Q_Sgn);
- if (Instruction* UDiv = dyn_cast<Instruction>(Q_Mag))
+ if (Instruction *UDiv = dyn_cast<Instruction>(Q_Mag))
Builder.SetInsertPoint(UDiv);
return Q;
// Generates code to divide two unsigned scalar 32-bit integers. Returns the
// quotient, rounded towards 0. Builder's insert point should be pointing at the
// udiv instruction.
-static Value* GenerateUnsignedDivisionCode(Value* Dividend, Value* Divisor,
- IRBuilder<>& Builder) {
+static Value *GenerateUnsignedDivisionCode(Value *Dividend, Value *Divisor,
+ IRBuilder<> &Builder) {
// The basic algorithm can be found in the compiler-rt project's
// implementation of __udivsi3.c. Here, we do a lower-level IR based approach
// that's been hand-tuned to lessen the amount of control flow involved.
// Some helper values
- IntegerType* I32Ty = Builder.getInt32Ty();
+ IntegerType *I32Ty = Builder.getInt32Ty();
- ConstantInt* Zero = Builder.getInt32(0);
- ConstantInt* One = Builder.getInt32(1);
- ConstantInt* ThirtyOne = Builder.getInt32(31);
- ConstantInt* NegOne = ConstantInt::getSigned(I32Ty, -1);
- ConstantInt* True = Builder.getTrue();
+ ConstantInt *Zero = Builder.getInt32(0);
+ ConstantInt *One = Builder.getInt32(1);
+ ConstantInt *ThirtyOne = Builder.getInt32(31);
+ ConstantInt *NegOne = ConstantInt::getSigned(I32Ty, -1);
+ ConstantInt *True = Builder.getTrue();
- BasicBlock* IBB = Builder.GetInsertBlock();
- Function* F = IBB->getParent();
- Function* CTLZi32 = Intrinsic::getDeclaration(F->getParent(), Intrinsic::ctlz,
+ BasicBlock *IBB = Builder.GetInsertBlock();
+ Function *F = IBB->getParent();
+ Function *CTLZi32 = Intrinsic::getDeclaration(F->getParent(), Intrinsic::ctlz,
I32Ty);
// Our CFG is going to look like:
// | ... |
// | end |
// +-------+
- BasicBlock* SpecialCases = Builder.GetInsertBlock();
+ BasicBlock *SpecialCases = Builder.GetInsertBlock();
SpecialCases->setName(Twine(SpecialCases->getName(), "_udiv-special-cases"));
- BasicBlock* End = SpecialCases->splitBasicBlock(Builder.GetInsertPoint(),
+ BasicBlock *End = SpecialCases->splitBasicBlock(Builder.GetInsertPoint(),
"udiv-end");
- BasicBlock* LoopExit = BasicBlock::Create(Builder.getContext(),
+ BasicBlock *LoopExit = BasicBlock::Create(Builder.getContext(),
"udiv-loop-exit", F, End);
- BasicBlock* DoWhile = BasicBlock::Create(Builder.getContext(),
+ BasicBlock *DoWhile = BasicBlock::Create(Builder.getContext(),
"udiv-do-while", F, End);
- BasicBlock* Preheader = BasicBlock::Create(Builder.getContext(),
+ BasicBlock *Preheader = BasicBlock::Create(Builder.getContext(),
"udiv-preheader", F, End);
- BasicBlock* BB1 = BasicBlock::Create(Builder.getContext(),
+ BasicBlock *BB1 = BasicBlock::Create(Builder.getContext(),
"udiv-bb1", F, End);
// We'll be overwriting the terminator to insert our extra blocks
// ; %earlyRet = or i1 %ret0, %retDividend
// ; br i1 %earlyRet, label %end, label %bb1
Builder.SetInsertPoint(SpecialCases);
- Value* Ret0_1 = Builder.CreateICmpEQ(Divisor, Zero);
- Value* Ret0_2 = Builder.CreateICmpEQ(Dividend, Zero);
- Value* Ret0_3 = Builder.CreateOr(Ret0_1, Ret0_2);
- Value* Tmp0 = Builder.CreateCall2(CTLZi32, Divisor, True);
- Value* Tmp1 = Builder.CreateCall2(CTLZi32, Dividend, True);
- Value* SR = Builder.CreateSub(Tmp0, Tmp1);
- Value* Ret0_4 = Builder.CreateICmpUGT(SR, ThirtyOne);
- Value* Ret0 = Builder.CreateOr(Ret0_3, Ret0_4);
- Value* RetDividend = Builder.CreateICmpEQ(SR, ThirtyOne);
- Value* RetVal = Builder.CreateSelect(Ret0, Zero, Dividend);
- Value* EarlyRet = Builder.CreateOr(Ret0, RetDividend);
+ Value *Ret0_1 = Builder.CreateICmpEQ(Divisor, Zero);
+ Value *Ret0_2 = Builder.CreateICmpEQ(Dividend, Zero);
+ Value *Ret0_3 = Builder.CreateOr(Ret0_1, Ret0_2);
+ Value *Tmp0 = Builder.CreateCall2(CTLZi32, Divisor, True);
+ Value *Tmp1 = Builder.CreateCall2(CTLZi32, Dividend, True);
+ Value *SR = Builder.CreateSub(Tmp0, Tmp1);
+ Value *Ret0_4 = Builder.CreateICmpUGT(SR, ThirtyOne);
+ Value *Ret0 = Builder.CreateOr(Ret0_3, Ret0_4);
+ Value *RetDividend = Builder.CreateICmpEQ(SR, ThirtyOne);
+ Value *RetVal = Builder.CreateSelect(Ret0, Zero, Dividend);
+ Value *EarlyRet = Builder.CreateOr(Ret0, RetDividend);
Builder.CreateCondBr(EarlyRet, End, BB1);
// ; bb1: ; preds = %special-cases
// ; %skipLoop = icmp eq i32 %sr_1, 0
// ; br i1 %skipLoop, label %loop-exit, label %preheader
Builder.SetInsertPoint(BB1);
- Value* SR_1 = Builder.CreateAdd(SR, One);
- Value* Tmp2 = Builder.CreateSub(ThirtyOne, SR);
- Value* Q = Builder.CreateShl(Dividend, Tmp2);
- Value* SkipLoop = Builder.CreateICmpEQ(SR_1, Zero);
+ Value *SR_1 = Builder.CreateAdd(SR, One);
+ Value *Tmp2 = Builder.CreateSub(ThirtyOne, SR);
+ Value *Q = Builder.CreateShl(Dividend, Tmp2);
+ Value *SkipLoop = Builder.CreateICmpEQ(SR_1, Zero);
Builder.CreateCondBr(SkipLoop, LoopExit, Preheader);
// ; preheader: ; preds = %bb1
// ; %tmp4 = add i32 %divisor, -1
// ; br label %do-while
Builder.SetInsertPoint(Preheader);
- Value* Tmp3 = Builder.CreateLShr(Dividend, SR_1);
- Value* Tmp4 = Builder.CreateAdd(Divisor, NegOne);
+ Value *Tmp3 = Builder.CreateLShr(Dividend, SR_1);
+ Value *Tmp4 = Builder.CreateAdd(Divisor, NegOne);
Builder.CreateBr(DoWhile);
// ; do-while: ; preds = %do-while, %preheader
// ; %tmp12 = icmp eq i32 %sr_2, 0
// ; br i1 %tmp12, label %loop-exit, label %do-while
Builder.SetInsertPoint(DoWhile);
- PHINode* Carry_1 = Builder.CreatePHI(I32Ty, 2);
- PHINode* SR_3 = Builder.CreatePHI(I32Ty, 2);
- PHINode* R_1 = Builder.CreatePHI(I32Ty, 2);
- PHINode* Q_2 = Builder.CreatePHI(I32Ty, 2);
- Value* Tmp5 = Builder.CreateShl(R_1, One);
- Value* Tmp6 = Builder.CreateLShr(Q_2, ThirtyOne);
- Value* Tmp7 = Builder.CreateOr(Tmp5, Tmp6);
- Value* Tmp8 = Builder.CreateShl(Q_2, One);
- Value* Q_1 = Builder.CreateOr(Carry_1, Tmp8);
- Value* Tmp9 = Builder.CreateSub(Tmp4, Tmp7);
- Value* Tmp10 = Builder.CreateAShr(Tmp9, 31);
- Value* Carry = Builder.CreateAnd(Tmp10, One);
- Value* Tmp11 = Builder.CreateAnd(Tmp10, Divisor);
- Value* R = Builder.CreateSub(Tmp7, Tmp11);
- Value* SR_2 = Builder.CreateAdd(SR_3, NegOne);
- Value* Tmp12 = Builder.CreateICmpEQ(SR_2, Zero);
+ PHINode *Carry_1 = Builder.CreatePHI(I32Ty, 2);
+ PHINode *SR_3 = Builder.CreatePHI(I32Ty, 2);
+ PHINode *R_1 = Builder.CreatePHI(I32Ty, 2);
+ PHINode *Q_2 = Builder.CreatePHI(I32Ty, 2);
+ Value *Tmp5 = Builder.CreateShl(R_1, One);
+ Value *Tmp6 = Builder.CreateLShr(Q_2, ThirtyOne);
+ Value *Tmp7 = Builder.CreateOr(Tmp5, Tmp6);
+ Value *Tmp8 = Builder.CreateShl(Q_2, One);
+ Value *Q_1 = Builder.CreateOr(Carry_1, Tmp8);
+ Value *Tmp9 = Builder.CreateSub(Tmp4, Tmp7);
+ Value *Tmp10 = Builder.CreateAShr(Tmp9, 31);
+ Value *Carry = Builder.CreateAnd(Tmp10, One);
+ Value *Tmp11 = Builder.CreateAnd(Tmp10, Divisor);
+ Value *R = Builder.CreateSub(Tmp7, Tmp11);
+ Value *SR_2 = Builder.CreateAdd(SR_3, NegOne);
+ Value *Tmp12 = Builder.CreateICmpEQ(SR_2, Zero);
Builder.CreateCondBr(Tmp12, LoopExit, DoWhile);
// ; loop-exit: ; preds = %do-while, %bb1
// ; %q_4 = or i32 %carry_2, %tmp13
// ; br label %end
Builder.SetInsertPoint(LoopExit);
- PHINode* Carry_2 = Builder.CreatePHI(I32Ty, 2);
- PHINode* Q_3 = Builder.CreatePHI(I32Ty, 2);
- Value* Tmp13 = Builder.CreateShl(Q_3, One);
- Value* Q_4 = Builder.CreateOr(Carry_2, Tmp13);
+ PHINode *Carry_2 = Builder.CreatePHI(I32Ty, 2);
+ PHINode *Q_3 = Builder.CreatePHI(I32Ty, 2);
+ Value *Tmp13 = Builder.CreateShl(Q_3, One);
+ Value *Q_4 = Builder.CreateOr(Carry_2, Tmp13);
Builder.CreateBr(End);
// ; end: ; preds = %loop-exit, %special-cases
// ; %q_5 = phi i32 [ %q_4, %loop-exit ], [ %retVal, %special-cases ]
// ; ret i32 %q_5
Builder.SetInsertPoint(End, End->begin());
- PHINode* Q_5 = Builder.CreatePHI(I32Ty, 2);
+ PHINode *Q_5 = Builder.CreatePHI(I32Ty, 2);
// Populate the Phis, since all values have now been created. Our Phis were:
// ; %carry_1 = phi i32 [ 0, %preheader ], [ %carry, %do-while ]
return Q_5;
}
-bool llvm::expandDivision(BinaryOperator* Div) {
+bool llvm::expandDivision(BinaryOperator *Div) {
assert((Div->getOpcode() == Instruction::SDiv ||
Div->getOpcode() == Instruction::UDiv) &&
"Trying to expand division from a non-division function");
// First prepare the sign if it's a signed division
if (Div->getOpcode() == Instruction::SDiv) {
// Lower the code to unsigned division, and reset Div to point to the udiv.
- Value* Quotient = GenerateSignedDivisionCode(Div->getOperand(0),
+ Value *Quotient = GenerateSignedDivisionCode(Div->getOperand(0),
Div->getOperand(1), Builder);
Div->replaceAllUsesWith(Quotient);
Div->dropAllReferences();
Div->eraseFromParent();
// If we didn't actually generate a udiv instruction, we're done
- BinaryOperator* BO = dyn_cast<BinaryOperator>(Builder.GetInsertPoint());
+ BinaryOperator *BO = dyn_cast<BinaryOperator>(Builder.GetInsertPoint());
if (!BO || BO->getOpcode() != Instruction::UDiv)
return true;
}
// Insert the unsigned division code
- Value* Quotient = GenerateUnsignedDivisionCode(Div->getOperand(0),
+ Value *Quotient = GenerateUnsignedDivisionCode(Div->getOperand(0),
Div->getOperand(1),
Builder);
Div->replaceAllUsesWith(Quotient);
projects / oota-llvm.git / commitdiff