//===- LowerInvoke.cpp - Eliminate Invoke & Unwind instructions -----------===//
-//
+//
// The LLVM Compiler Infrastructure
//
// This file was developed by the LLVM research group and is distributed under
// the University of Illinois Open Source License. See LICENSE.TXT for details.
-//
+//
//===----------------------------------------------------------------------===//
//
// This transformation is designed for use by code generators which do not yet
// program will print a message then abort.
//
// 'Expensive' exception handling support gives the full exception handling
-// support to the program at making the 'invoke' instruction really expensive.
-// It basically inserts setjmp/longjmp calls to emulate the exception handling
-// as necessary.
+// support to the program at the cost of making the 'invoke' instruction
+// really expensive. It basically inserts setjmp/longjmp calls to emulate the
+// exception handling as necessary.
//
// Because the 'expensive' support slows down programs a lot, and EH is only
// used for a subset of the programs, it must be specifically enabled by an
// option.
//
+// Note that after this pass runs the CFG is not entirely accurate (exceptional
+// control flow edges are not correct anymore) so only very simple things should
+// be done after the lowerinvoke pass has run (like generation of native code).
+// This should not be used as a general purpose "my LLVM-to-LLVM pass doesn't
+// support the invoke instruction yet" lowering pass.
+//
//===----------------------------------------------------------------------===//
+#define DEBUG_TYPE "lowerinvoke"
#include "llvm/Transforms/Scalar.h"
#include "llvm/Constants.h"
#include "llvm/DerivedTypes.h"
#include "llvm/Module.h"
#include "llvm/Pass.h"
#include "llvm/Transforms/Utils/BasicBlockUtils.h"
-#include "Support/Statistic.h"
-#include "Support/CommandLine.h"
+#include "llvm/Transforms/Utils/Local.h"
+#include "llvm/ADT/Statistic.h"
+#include "llvm/Support/CommandLine.h"
+#include "llvm/Support/Compiler.h"
+#include "llvm/Target/TargetLowering.h"
#include <csetjmp>
using namespace llvm;
-namespace {
- Statistic<> NumLowered("lowerinvoke", "Number of invoke & unwinds replaced");
- cl::opt<bool> ExpensiveEHSupport("enable-correct-eh-support",
+STATISTIC(NumInvokes, "Number of invokes replaced");
+STATISTIC(NumUnwinds, "Number of unwinds replaced");
+STATISTIC(NumSpilled, "Number of registers live across unwind edges");
+
+static cl::opt<bool> ExpensiveEHSupport("enable-correct-eh-support",
cl::desc("Make the -lowerinvoke pass insert expensive, but correct, EH code"));
- class LowerInvoke : public FunctionPass {
+namespace {
+ class VISIBILITY_HIDDEN LowerInvoke : public FunctionPass {
// Used for both models.
Function *WriteFn;
Function *AbortFn;
const Type *JBLinkTy;
GlobalVariable *JBListHead;
Function *SetJmpFn, *LongJmpFn;
+
+ // We peek in TLI to grab the target's jmp_buf size and alignment
+ const TargetLowering *TLI;
+
public:
+ LowerInvoke(const TargetLowering *tli = NULL) : TLI(tli) { }
bool doInitialization(Module &M);
bool runOnFunction(Function &F);
+
+ virtual void getAnalysisUsage(AnalysisUsage &AU) const {
+ // This is a cluster of orthogonal Transforms
+ AU.addPreservedID(PromoteMemoryToRegisterID);
+ AU.addPreservedID(LowerSelectID);
+ AU.addPreservedID(LowerSwitchID);
+ AU.addPreservedID(LowerAllocationsID);
+ }
+
private:
+ void createAbortMessage();
void writeAbortMessage(Instruction *IB);
bool insertCheapEHSupport(Function &F);
+ void splitLiveRangesLiveAcrossInvokes(std::vector<InvokeInst*> &Invokes);
+ void rewriteExpensiveInvoke(InvokeInst *II, unsigned InvokeNo,
+ AllocaInst *InvokeNum, SwitchInst *CatchSwitch);
bool insertExpensiveEHSupport(Function &F);
};
- RegisterOpt<LowerInvoke>
+ RegisterPass<LowerInvoke>
X("lowerinvoke", "Lower invoke and unwind, for unwindless code generators");
}
+const PassInfo *llvm::LowerInvokePassID = X.getPassInfo();
+
// Public Interface To the LowerInvoke pass.
-FunctionPass *llvm::createLowerInvokePass() { return new LowerInvoke(); }
+FunctionPass *llvm::createLowerInvokePass(const TargetLowering *TLI) {
+ return new LowerInvoke(TLI);
+}
// doInitialization - Make sure that there is a prototype for abort in the
// current module.
bool LowerInvoke::doInitialization(Module &M) {
const Type *VoidPtrTy = PointerType::get(Type::SByteTy);
+ AbortMessage = 0;
if (ExpensiveEHSupport) {
- // Insert a type for the linked list of jump buffers. Unfortunately, we
- // don't know the size of the target's setjmp buffer, so we make a guess.
- // If this guess turns out to be too small, bad stuff could happen.
- unsigned JmpBufSize = 200; // PPC has 192 words
- assert(sizeof(jmp_buf) <= JmpBufSize*sizeof(void*) &&
- "LowerInvoke doesn't know about targets with jmp_buf size > 200 words!");
- const Type *JmpBufTy = ArrayType::get(VoidPtrTy, JmpBufSize);
+ // Insert a type for the linked list of jump buffers.
+ unsigned JBSize = TLI ? TLI->getJumpBufSize() : 0;
+ JBSize = JBSize ? JBSize : 200;
+ const Type *JmpBufTy = ArrayType::get(VoidPtrTy, JBSize);
{ // The type is recursive, so use a type holder.
std::vector<const Type*> Elements;
+ Elements.push_back(JmpBufTy);
OpaqueType *OT = OpaqueType::get();
Elements.push_back(PointerType::get(OT));
- Elements.push_back(JmpBufTy);
PATypeHolder JBLType(StructType::get(Elements));
OT->refineAbstractTypeTo(JBLType.get()); // Complete the cycle.
JBLinkTy = JBLType.get();
+ M.addTypeName("llvm.sjljeh.jmpbufty", JBLinkTy);
}
const Type *PtrJBList = PointerType::get(JBLinkTy);
// Now that we've done that, insert the jmpbuf list head global, unless it
// already exists.
- if (!(JBListHead = M.getGlobalVariable("llvm.sjljeh.jblist", PtrJBList)))
+ if (!(JBListHead = M.getGlobalVariable("llvm.sjljeh.jblist", PtrJBList))) {
JBListHead = new GlobalVariable(PtrJBList, false,
GlobalValue::LinkOnceLinkage,
Constant::getNullValue(PtrJBList),
"llvm.sjljeh.jblist", &M);
- SetJmpFn = M.getOrInsertFunction("setjmp", Type::IntTy,
- PointerType::get(JmpBufTy), 0);
- LongJmpFn = M.getOrInsertFunction("longjmp", Type::VoidTy,
+ }
+ SetJmpFn = M.getOrInsertFunction("llvm.setjmp", Type::IntTy,
+ PointerType::get(JmpBufTy), (Type *)0);
+ LongJmpFn = M.getOrInsertFunction("llvm.longjmp", Type::VoidTy,
PointerType::get(JmpBufTy),
- Type::IntTy, 0);
-
- // The abort message for expensive EH support tells the user that the
- // program 'unwound' without an 'invoke' instruction.
- Constant *Msg =
- ConstantArray::get("ERROR: Exception thrown, but not caught!\n");
- AbortMessageLength = Msg->getNumOperands()-1; // don't include \0
-
- GlobalVariable *MsgGV = M.getGlobalVariable("abort.msg", Msg->getType());
- if (MsgGV && (!MsgGV->hasInitializer() || MsgGV->getInitializer() != Msg))
- MsgGV = 0;
- if (!MsgGV)
- MsgGV = new GlobalVariable(Msg->getType(), true,
- GlobalValue::InternalLinkage,
- Msg, "abort.msg", &M);
- std::vector<Constant*> GEPIdx(2, Constant::getNullValue(Type::LongTy));
- AbortMessage =
- ConstantExpr::getGetElementPtr(ConstantPointerRef::get(MsgGV), GEPIdx);
-
- } else {
- // The abort message for cheap EH support tells the user that EH is not
- // enabled.
- Constant *Msg =
- ConstantArray::get("Exception handler needed, but not enabled. Recompile"
- " program with -enable-correct-eh-support.\n");
- AbortMessageLength = Msg->getNumOperands()-1; // don't include \0
-
- GlobalVariable *MsgGV = M.getGlobalVariable("abort.msg", Msg->getType());
- if (MsgGV && (!MsgGV->hasInitializer() || MsgGV->getInitializer() != Msg))
- MsgGV = 0;
-
- if (!MsgGV)
- MsgGV = new GlobalVariable(Msg->getType(), true,
- GlobalValue::InternalLinkage,
- Msg, "abort.msg", &M);
- std::vector<Constant*> GEPIdx(2, Constant::getNullValue(Type::LongTy));
- AbortMessage =
- ConstantExpr::getGetElementPtr(ConstantPointerRef::get(MsgGV), GEPIdx);
+ Type::IntTy, (Type *)0);
}
// We need the 'write' and 'abort' functions for both models.
- AbortFn = M.getOrInsertFunction("abort", Type::VoidTy, 0);
+ AbortFn = M.getOrInsertFunction("abort", Type::VoidTy, (Type *)0);
// Unfortunately, 'write' can end up being prototyped in several different
// ways. If the user defines a three (or more) operand function named 'write'
WriteFn = 0;
} else {
WriteFn = M.getOrInsertFunction("write", Type::VoidTy, Type::IntTy,
- VoidPtrTy, Type::IntTy, 0);
+ VoidPtrTy, Type::IntTy, (Type *)0);
}
return true;
}
+void LowerInvoke::createAbortMessage() {
+ Module &M = *WriteFn->getParent();
+ if (ExpensiveEHSupport) {
+ // The abort message for expensive EH support tells the user that the
+ // program 'unwound' without an 'invoke' instruction.
+ Constant *Msg =
+ ConstantArray::get("ERROR: Exception thrown, but not caught!\n");
+ AbortMessageLength = Msg->getNumOperands()-1; // don't include \0
+
+ GlobalVariable *MsgGV = new GlobalVariable(Msg->getType(), true,
+ GlobalValue::InternalLinkage,
+ Msg, "abortmsg", &M);
+ std::vector<Constant*> GEPIdx(2, Constant::getNullValue(Type::IntTy));
+ AbortMessage = ConstantExpr::getGetElementPtr(MsgGV, GEPIdx);
+ } else {
+ // The abort message for cheap EH support tells the user that EH is not
+ // enabled.
+ Constant *Msg =
+ ConstantArray::get("Exception handler needed, but not enabled. Recompile"
+ " program with -enable-correct-eh-support.\n");
+ AbortMessageLength = Msg->getNumOperands()-1; // don't include \0
+
+ GlobalVariable *MsgGV = new GlobalVariable(Msg->getType(), true,
+ GlobalValue::InternalLinkage,
+ Msg, "abortmsg", &M);
+ std::vector<Constant*> GEPIdx(2, Constant::getNullValue(Type::IntTy));
+ AbortMessage = ConstantExpr::getGetElementPtr(MsgGV, GEPIdx);
+ }
+}
+
+
void LowerInvoke::writeAbortMessage(Instruction *IB) {
if (WriteFn) {
+ if (AbortMessage == 0) createAbortMessage();
+
// These are the arguments we WANT...
std::vector<Value*> Args;
Args.push_back(ConstantInt::get(Type::IntTy, 2));
unsigned NumArgs = FT->getNumParams();
for (unsigned i = 0; i != 3; ++i)
if (i < NumArgs && FT->getParamType(i) != Args[i]->getType())
- Args[i] = ConstantExpr::getCast(cast<Constant>(Args[i]),
- FT->getParamType(i));
-
- new CallInst(WriteFn, Args, "", IB);
+ if (Args[i]->getType()->isInteger())
+ Args[i] = ConstantExpr::getIntegerCast(cast<Constant>(Args[i]),
+ FT->getParamType(i), true);
+ else
+ Args[i] = ConstantExpr::getBitCast(cast<Constant>(Args[i]),
+ FT->getParamType(i));
+
+ (new CallInst(WriteFn, Args, "", IB))->setTailCall();
}
}
if (InvokeInst *II = dyn_cast<InvokeInst>(BB->getTerminator())) {
// Insert a normal call instruction...
std::string Name = II->getName(); II->setName("");
- Value *NewCall = new CallInst(II->getCalledValue(),
- std::vector<Value*>(II->op_begin()+3,
- II->op_end()), Name,II);
+ CallInst *NewCall = new CallInst(II->getCalledValue(),
+ std::vector<Value*>(II->op_begin()+3,
+ II->op_end()), Name, II);
+ NewCall->setCallingConv(II->getCallingConv());
II->replaceAllUsesWith(NewCall);
-
+
// Insert an unconditional branch to the normal destination.
new BranchInst(II->getNormalDest(), II);
// Remove the invoke instruction now.
BB->getInstList().erase(II);
- ++NumLowered; Changed = true;
+ ++NumInvokes; Changed = true;
} else if (UnwindInst *UI = dyn_cast<UnwindInst>(BB->getTerminator())) {
// Insert a new call to write(2, AbortMessage, AbortMessageLength);
writeAbortMessage(UI);
// Insert a call to abort()
- new CallInst(AbortFn, std::vector<Value*>(), "", UI);
+ (new CallInst(AbortFn, std::vector<Value*>(), "", UI))->setTailCall();
// Insert a return instruction. This really should be a "barrier", as it
// is unreachable.
// Remove the unwind instruction now.
BB->getInstList().erase(UI);
- ++NumLowered; Changed = true;
+ ++NumUnwinds; Changed = true;
}
return Changed;
}
-bool LowerInvoke::insertExpensiveEHSupport(Function &F) {
- bool Changed = false;
+/// rewriteExpensiveInvoke - Insert code and hack the function to replace the
+/// specified invoke instruction with a call.
+void LowerInvoke::rewriteExpensiveInvoke(InvokeInst *II, unsigned InvokeNo,
+ AllocaInst *InvokeNum,
+ SwitchInst *CatchSwitch) {
+ ConstantInt *InvokeNoC = ConstantInt::get(Type::UIntTy, InvokeNo);
+
+ // Insert a store of the invoke num before the invoke and store zero into the
+ // location afterward.
+ new StoreInst(InvokeNoC, InvokeNum, true, II); // volatile
+
+ BasicBlock::iterator NI = II->getNormalDest()->begin();
+ while (isa<PHINode>(NI)) ++NI;
+ // nonvolatile.
+ new StoreInst(Constant::getNullValue(Type::UIntTy), InvokeNum, false, NI);
+
+ // Add a switch case to our unwind block.
+ CatchSwitch->addCase(InvokeNoC, II->getUnwindDest());
+
+ // Insert a normal call instruction.
+ std::string Name = II->getName(); II->setName("");
+ CallInst *NewCall = new CallInst(II->getCalledValue(),
+ std::vector<Value*>(II->op_begin()+3,
+ II->op_end()), Name,
+ II);
+ NewCall->setCallingConv(II->getCallingConv());
+ II->replaceAllUsesWith(NewCall);
+
+ // Replace the invoke with an uncond branch.
+ new BranchInst(II->getNormalDest(), NewCall->getParent());
+ II->eraseFromParent();
+}
- // If a function uses invoke, we have an alloca for the jump buffer.
- AllocaInst *JmpBuf = 0;
+/// MarkBlocksLiveIn - Insert BB and all of its predescessors into LiveBBs until
+/// we reach blocks we've already seen.
+static void MarkBlocksLiveIn(BasicBlock *BB, std::set<BasicBlock*> &LiveBBs) {
+ if (!LiveBBs.insert(BB).second) return; // already been here.
+
+ for (pred_iterator PI = pred_begin(BB), E = pred_end(BB); PI != E; ++PI)
+ MarkBlocksLiveIn(*PI, LiveBBs);
+}
- // If this function contains an unwind instruction, two blocks get added: one
- // to actually perform the longjmp, and one to terminate the program if there
- // is no handler.
- BasicBlock *UnwindBlock = 0, *TermBlock = 0;
- std::vector<LoadInst*> JBPtrs;
+// First thing we need to do is scan the whole function for values that are
+// live across unwind edges. Each value that is live across an unwind edge
+// we spill into a stack location, guaranteeing that there is nothing live
+// across the unwind edge. This process also splits all critical edges
+// coming out of invoke's.
+void LowerInvoke::
+splitLiveRangesLiveAcrossInvokes(std::vector<InvokeInst*> &Invokes) {
+ // First step, split all critical edges from invoke instructions.
+ for (unsigned i = 0, e = Invokes.size(); i != e; ++i) {
+ InvokeInst *II = Invokes[i];
+ SplitCriticalEdge(II, 0, this);
+ SplitCriticalEdge(II, 1, this);
+ assert(!isa<PHINode>(II->getNormalDest()) &&
+ !isa<PHINode>(II->getUnwindDest()) &&
+ "critical edge splitting left single entry phi nodes?");
+ }
- for (Function::iterator BB = F.begin(), E = F.end(); BB != E; ++BB)
- if (InvokeInst *II = dyn_cast<InvokeInst>(BB->getTerminator())) {
- if (JmpBuf == 0)
- JmpBuf = new AllocaInst(JBLinkTy, 0, "jblink", F.begin()->begin());
-
- // On the entry to the invoke, we must install our JmpBuf as the top of
- // the stack.
- LoadInst *OldEntry = new LoadInst(JBListHead, "oldehlist", II);
-
- // Store this old value as our 'next' field, and store our alloca as the
- // current jblist.
- std::vector<Value*> Idx;
- Idx.push_back(Constant::getNullValue(Type::LongTy));
- Idx.push_back(ConstantUInt::get(Type::UByteTy, 0));
- Value *NextFieldPtr = new GetElementPtrInst(JmpBuf, Idx, "NextField", II);
- new StoreInst(OldEntry, NextFieldPtr, II);
- new StoreInst(JmpBuf, JBListHead, II);
-
- // Call setjmp, passing in the address of the jmpbuffer.
- Idx[1] = ConstantUInt::get(Type::UByteTy, 1);
- Value *JmpBufPtr = new GetElementPtrInst(JmpBuf, Idx, "TheJmpBuf", II);
- Value *SJRet = new CallInst(SetJmpFn, JmpBufPtr, "sjret", II);
-
- // Compare the return value to zero.
- Value *IsNormal = BinaryOperator::create(Instruction::SetEQ, SJRet,
- Constant::getNullValue(SJRet->getType()),
- "notunwind", II);
- // Create the receiver block if there is a critical edge to the normal
- // destination.
- SplitCriticalEdge(II, 0, this);
- Instruction *InsertLoc = II->getNormalDest()->begin();
+ Function *F = Invokes.back()->getParent()->getParent();
+
+ // To avoid having to handle incoming arguments specially, we lower each arg
+ // to a copy instruction in the entry block. This ensures that the argument
+ // value itself cannot be live across the entry block.
+ BasicBlock::iterator AfterAllocaInsertPt = F->begin()->begin();
+ while (isa<AllocaInst>(AfterAllocaInsertPt) &&
+ isa<ConstantInt>(cast<AllocaInst>(AfterAllocaInsertPt)->getArraySize()))
+ ++AfterAllocaInsertPt;
+ for (Function::arg_iterator AI = F->arg_begin(), E = F->arg_end();
+ AI != E; ++AI) {
+ // This is always a no-op cast because we're casting AI to AI->getType() so
+ // src and destination types are identical. BitCast is the only possibility.
+ CastInst *NC = new BitCastInst(
+ AI, AI->getType(), AI->getName()+".tmp", AfterAllocaInsertPt);
+ AI->replaceAllUsesWith(NC);
+ // Normally its is forbidden to replace a CastInst's operand because it
+ // could cause the opcode to reflect an illegal conversion. However, we're
+ // replacing it here with the same value it was constructed with to simply
+ // make NC its user.
+ NC->setOperand(0, AI);
+ }
+
+ // Finally, scan the code looking for instructions with bad live ranges.
+ for (Function::iterator BB = F->begin(), E = F->end(); BB != E; ++BB)
+ for (BasicBlock::iterator II = BB->begin(), E = BB->end(); II != E; ++II) {
+ // Ignore obvious cases we don't have to handle. In particular, most
+ // instructions either have no uses or only have a single use inside the
+ // current block. Ignore them quickly.
+ Instruction *Inst = II;
+ if (Inst->use_empty()) continue;
+ if (Inst->hasOneUse() &&
+ cast<Instruction>(Inst->use_back())->getParent() == BB &&
+ !isa<PHINode>(Inst->use_back())) continue;
- // Insert a normal call instruction on the normal execution path.
- std::string Name = II->getName(); II->setName("");
- Value *NewCall = new CallInst(II->getCalledValue(),
- std::vector<Value*>(II->op_begin()+3,
- II->op_end()), Name,
- InsertLoc);
- II->replaceAllUsesWith(NewCall);
+ // If this is an alloca in the entry block, it's not a real register
+ // value.
+ if (AllocaInst *AI = dyn_cast<AllocaInst>(Inst))
+ if (isa<ConstantInt>(AI->getArraySize()) && BB == F->begin())
+ continue;
- // If we got this far, then no exception was thrown and we can pop our
- // jmpbuf entry off.
- new StoreInst(OldEntry, JBListHead, InsertLoc);
-
- // Now we change the invoke into a branch instruction.
- new BranchInst(II->getNormalDest(), II->getUnwindDest(), IsNormal, II);
+ // Avoid iterator invalidation by copying users to a temporary vector.
+ std::vector<Instruction*> Users;
+ for (Value::use_iterator UI = Inst->use_begin(), E = Inst->use_end();
+ UI != E; ++UI) {
+ Instruction *User = cast<Instruction>(*UI);
+ if (User->getParent() != BB || isa<PHINode>(User))
+ Users.push_back(User);
+ }
- // Remove the InvokeInst now.
- BB->getInstList().erase(II);
- ++NumLowered; Changed = true;
+ // Scan all of the uses and see if the live range is live across an unwind
+ // edge. If we find a use live across an invoke edge, create an alloca
+ // and spill the value.
+ std::set<InvokeInst*> InvokesWithStoreInserted;
+
+ // Find all of the blocks that this value is live in.
+ std::set<BasicBlock*> LiveBBs;
+ LiveBBs.insert(Inst->getParent());
+ while (!Users.empty()) {
+ Instruction *U = Users.back();
+ Users.pop_back();
+
+ if (!isa<PHINode>(U)) {
+ MarkBlocksLiveIn(U->getParent(), LiveBBs);
+ } else {
+ // Uses for a PHI node occur in their predecessor block.
+ PHINode *PN = cast<PHINode>(U);
+ for (unsigned i = 0, e = PN->getNumIncomingValues(); i != e; ++i)
+ if (PN->getIncomingValue(i) == Inst)
+ MarkBlocksLiveIn(PN->getIncomingBlock(i), LiveBBs);
+ }
+ }
- } else if (UnwindInst *UI = dyn_cast<UnwindInst>(BB->getTerminator())) {
- if (UnwindBlock == 0) {
- // Create two new blocks, the unwind block and the terminate block. Add
- // them at the end of the function because they are not hot.
- UnwindBlock = new BasicBlock("unwind", &F);
- TermBlock = new BasicBlock("unwinderror", &F);
-
- // Insert return instructions. These really should be "barrier"s, as
- // they are unreachable.
- new ReturnInst(F.getReturnType() == Type::VoidTy ? 0 :
- Constant::getNullValue(F.getReturnType()), UnwindBlock);
- new ReturnInst(F.getReturnType() == Type::VoidTy ? 0 :
- Constant::getNullValue(F.getReturnType()), TermBlock);
+ // Now that we know all of the blocks that this thing is live in, see if
+ // it includes any of the unwind locations.
+ bool NeedsSpill = false;
+ for (unsigned i = 0, e = Invokes.size(); i != e; ++i) {
+ BasicBlock *UnwindBlock = Invokes[i]->getUnwindDest();
+ if (UnwindBlock != BB && LiveBBs.count(UnwindBlock)) {
+ NeedsSpill = true;
+ }
}
- // Load the JBList, if it's null, then there was no catch!
- LoadInst *Ptr = new LoadInst(JBListHead, "ehlist", UI);
- Value *NotNull = BinaryOperator::create(Instruction::SetNE, Ptr,
- Constant::getNullValue(Ptr->getType()),
- "notnull", UI);
- new BranchInst(UnwindBlock, TermBlock, NotNull, UI);
+ // If we decided we need a spill, do it.
+ if (NeedsSpill) {
+ ++NumSpilled;
+ DemoteRegToStack(*Inst, true);
+ }
+ }
+}
- // Remember the loaded value so we can insert the PHI node as needed.
- JBPtrs.push_back(Ptr);
+bool LowerInvoke::insertExpensiveEHSupport(Function &F) {
+ std::vector<ReturnInst*> Returns;
+ std::vector<UnwindInst*> Unwinds;
+ std::vector<InvokeInst*> Invokes;
- // Remove the UnwindInst now.
- BB->getInstList().erase(UI);
- ++NumLowered; Changed = true;
+ for (Function::iterator BB = F.begin(), E = F.end(); BB != E; ++BB)
+ if (ReturnInst *RI = dyn_cast<ReturnInst>(BB->getTerminator())) {
+ // Remember all return instructions in case we insert an invoke into this
+ // function.
+ Returns.push_back(RI);
+ } else if (InvokeInst *II = dyn_cast<InvokeInst>(BB->getTerminator())) {
+ Invokes.push_back(II);
+ } else if (UnwindInst *UI = dyn_cast<UnwindInst>(BB->getTerminator())) {
+ Unwinds.push_back(UI);
}
- // If an unwind instruction was inserted, we need to set up the Unwind and
- // term blocks.
- if (UnwindBlock) {
- // In the unwind block, we know that the pointer coming in on the JBPtrs
- // list are non-null.
- Instruction *RI = UnwindBlock->getTerminator();
-
- Value *RecPtr;
- if (JBPtrs.size() == 1)
- RecPtr = JBPtrs[0];
- else {
- // If there is more than one unwind in this function, make a PHI node to
- // merge in all of the loaded values.
- PHINode *PN = new PHINode(JBPtrs[0]->getType(), "jbptrs", RI);
- for (unsigned i = 0, e = JBPtrs.size(); i != e; ++i)
- PN->addIncoming(JBPtrs[i], JBPtrs[i]->getParent());
- RecPtr = PN;
- }
+ if (Unwinds.empty() && Invokes.empty()) return false;
- // Now that we have a pointer to the whole record, remove the entry from the
- // JBList.
+ NumInvokes += Invokes.size();
+ NumUnwinds += Unwinds.size();
+
+ // TODO: This is not an optimal way to do this. In particular, this always
+ // inserts setjmp calls into the entries of functions with invoke instructions
+ // even though there are possibly paths through the function that do not
+ // execute any invokes. In particular, for functions with early exits, e.g.
+ // the 'addMove' method in hexxagon, it would be nice to not have to do the
+ // setjmp stuff on the early exit path. This requires a bit of dataflow, but
+ // would not be too hard to do.
+
+ // If we have an invoke instruction, insert a setjmp that dominates all
+ // invokes. After the setjmp, use a cond branch that goes to the original
+ // code path on zero, and to a designated 'catch' block of nonzero.
+ Value *OldJmpBufPtr = 0;
+ if (!Invokes.empty()) {
+ // First thing we need to do is scan the whole function for values that are
+ // live across unwind edges. Each value that is live across an unwind edge
+ // we spill into a stack location, guaranteeing that there is nothing live
+ // across the unwind edge. This process also splits all critical edges
+ // coming out of invoke's.
+ splitLiveRangesLiveAcrossInvokes(Invokes);
+
+ BasicBlock *EntryBB = F.begin();
+
+ // Create an alloca for the incoming jump buffer ptr and the new jump buffer
+ // that needs to be restored on all exits from the function. This is an
+ // alloca because the value needs to be live across invokes.
+ unsigned Align = TLI ? TLI->getJumpBufAlignment() : 0;
+ AllocaInst *JmpBuf =
+ new AllocaInst(JBLinkTy, 0, Align, "jblink", F.begin()->begin());
+
std::vector<Value*> Idx;
- Idx.push_back(Constant::getNullValue(Type::LongTy));
- Idx.push_back(ConstantUInt::get(Type::UByteTy, 0));
- Value *NextFieldPtr = new GetElementPtrInst(RecPtr, Idx, "NextField", RI);
- Value *NextRec = new LoadInst(NextFieldPtr, "NextRecord", RI);
- new StoreInst(NextRec, JBListHead, RI);
-
- // Now that we popped the top of the JBList, get a pointer to the jmpbuf and
- // longjmp.
- Idx[1] = ConstantUInt::get(Type::UByteTy, 1);
- Idx[0] = new GetElementPtrInst(RecPtr, Idx, "JmpBuf", RI);
- Idx[1] = ConstantInt::get(Type::IntTy, 1);
- new CallInst(LongJmpFn, Idx, "", RI);
-
- // Now we set up the terminate block.
- RI = TermBlock->getTerminator();
+ Idx.push_back(Constant::getNullValue(Type::IntTy));
+ Idx.push_back(ConstantInt::get(Type::UIntTy, 1));
+ OldJmpBufPtr = new GetElementPtrInst(JmpBuf, Idx, "OldBuf",
+ EntryBB->getTerminator());
+
+ // Copy the JBListHead to the alloca.
+ Value *OldBuf = new LoadInst(JBListHead, "oldjmpbufptr", true,
+ EntryBB->getTerminator());
+ new StoreInst(OldBuf, OldJmpBufPtr, true, EntryBB->getTerminator());
+
+ // Add the new jumpbuf to the list.
+ new StoreInst(JmpBuf, JBListHead, true, EntryBB->getTerminator());
+
+ // Create the catch block. The catch block is basically a big switch
+ // statement that goes to all of the invoke catch blocks.
+ BasicBlock *CatchBB = new BasicBlock("setjmp.catch", &F);
+
+ // Create an alloca which keeps track of which invoke is currently
+ // executing. For normal calls it contains zero.
+ AllocaInst *InvokeNum = new AllocaInst(Type::UIntTy, 0, "invokenum",
+ EntryBB->begin());
+ new StoreInst(ConstantInt::get(Type::UIntTy, 0), InvokeNum, true,
+ EntryBB->getTerminator());
+
+ // Insert a load in the Catch block, and a switch on its value. By default,
+ // we go to a block that just does an unwind (which is the correct action
+ // for a standard call).
+ BasicBlock *UnwindBB = new BasicBlock("unwindbb", &F);
+ Unwinds.push_back(new UnwindInst(UnwindBB));
- // Insert a new call to write(2, AbortMessage, AbortMessageLength);
- writeAbortMessage(RI);
+ Value *CatchLoad = new LoadInst(InvokeNum, "invoke.num", true, CatchBB);
+ SwitchInst *CatchSwitch =
+ new SwitchInst(CatchLoad, UnwindBB, Invokes.size(), CatchBB);
- // Insert a call to abort()
- new CallInst(AbortFn, std::vector<Value*>(), "", RI);
+ // Now that things are set up, insert the setjmp call itself.
+
+ // Split the entry block to insert the conditional branch for the setjmp.
+ BasicBlock *ContBlock = EntryBB->splitBasicBlock(EntryBB->getTerminator(),
+ "setjmp.cont");
+
+ Idx[1] = ConstantInt::get(Type::UIntTy, 0);
+ Value *JmpBufPtr = new GetElementPtrInst(JmpBuf, Idx, "TheJmpBuf",
+ EntryBB->getTerminator());
+ Value *SJRet = new CallInst(SetJmpFn, JmpBufPtr, "sjret",
+ EntryBB->getTerminator());
+
+ // Compare the return value to zero.
+ Value *IsNormal = new ICmpInst(ICmpInst::ICMP_EQ, SJRet,
+ Constant::getNullValue(SJRet->getType()),
+ "notunwind", EntryBB->getTerminator());
+ // Nuke the uncond branch.
+ EntryBB->getTerminator()->eraseFromParent();
+
+ // Put in a new condbranch in its place.
+ new BranchInst(ContBlock, CatchBB, IsNormal, EntryBB);
+
+ // At this point, we are all set up, rewrite each invoke instruction.
+ for (unsigned i = 0, e = Invokes.size(); i != e; ++i)
+ rewriteExpensiveInvoke(Invokes[i], i+1, InvokeNum, CatchSwitch);
}
- return Changed;
+ // We know that there is at least one unwind.
+
+ // Create three new blocks, the block to load the jmpbuf ptr and compare
+ // against null, the block to do the longjmp, and the error block for if it
+ // is null. Add them at the end of the function because they are not hot.
+ BasicBlock *UnwindHandler = new BasicBlock("dounwind", &F);
+ BasicBlock *UnwindBlock = new BasicBlock("unwind", &F);
+ BasicBlock *TermBlock = new BasicBlock("unwinderror", &F);
+
+ // If this function contains an invoke, restore the old jumpbuf ptr.
+ Value *BufPtr;
+ if (OldJmpBufPtr) {
+ // Before the return, insert a copy from the saved value to the new value.
+ BufPtr = new LoadInst(OldJmpBufPtr, "oldjmpbufptr", UnwindHandler);
+ new StoreInst(BufPtr, JBListHead, UnwindHandler);
+ } else {
+ BufPtr = new LoadInst(JBListHead, "ehlist", UnwindHandler);
+ }
+
+ // Load the JBList, if it's null, then there was no catch!
+ Value *NotNull = new ICmpInst(ICmpInst::ICMP_NE, BufPtr,
+ Constant::getNullValue(BufPtr->getType()),
+ "notnull", UnwindHandler);
+ new BranchInst(UnwindBlock, TermBlock, NotNull, UnwindHandler);
+
+ // Create the block to do the longjmp.
+ // Get a pointer to the jmpbuf and longjmp.
+ std::vector<Value*> Idx;
+ Idx.push_back(Constant::getNullValue(Type::IntTy));
+ Idx.push_back(ConstantInt::get(Type::UIntTy, 0));
+ Idx[0] = new GetElementPtrInst(BufPtr, Idx, "JmpBuf", UnwindBlock);
+ Idx[1] = ConstantInt::get(Type::IntTy, 1);
+ new CallInst(LongJmpFn, Idx, "", UnwindBlock);
+ new UnreachableInst(UnwindBlock);
+
+ // Set up the term block ("throw without a catch").
+ new UnreachableInst(TermBlock);
+
+ // Insert a new call to write(2, AbortMessage, AbortMessageLength);
+ writeAbortMessage(TermBlock->getTerminator());
+
+ // Insert a call to abort()
+ (new CallInst(AbortFn, std::vector<Value*>(), "",
+ TermBlock->getTerminator()))->setTailCall();
+
+
+ // Replace all unwinds with a branch to the unwind handler.
+ for (unsigned i = 0, e = Unwinds.size(); i != e; ++i) {
+ new BranchInst(UnwindHandler, Unwinds[i]);
+ Unwinds[i]->eraseFromParent();
+ }
+
+ // Finally, for any returns from this function, if this function contains an
+ // invoke, restore the old jmpbuf pointer to its input value.
+ if (OldJmpBufPtr) {
+ for (unsigned i = 0, e = Returns.size(); i != e; ++i) {
+ ReturnInst *R = Returns[i];
+
+ // Before the return, insert a copy from the saved value to the new value.
+ Value *OldBuf = new LoadInst(OldJmpBufPtr, "oldjmpbufptr", true, R);
+ new StoreInst(OldBuf, JBListHead, true, R);
+ }
+ }
+
+ return true;
}
bool LowerInvoke::runOnFunction(Function &F) {
projects / oota-llvm.git / blobdiff