Use *getUse() const { return UseAndIsSplittable.getPointer(); }
- bool isDead() const { return getUse() == 0; }
- void kill() { UseAndIsSplittable.setPointer(0); }
+ bool isDead() const { return getUse() == nullptr; }
+ void kill() { UseAndIsSplittable.setPointer(nullptr); }
/// \brief Support for ordering ranges.
///
if (SI.getOperand(1) == SI.getOperand(2))
return SI.getOperand(1);
- return 0;
+ return nullptr;
}
/// \brief Builder for the alloca slices.
Uses.push_back(std::make_pair(I, cast<Instruction>(U)));
} while (!Uses.empty());
- return 0;
+ return nullptr;
}
void visitPHINode(PHINode &PN) {
#if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
AI(AI),
#endif
- PointerEscapingInstr(0) {
+ PointerEscapingInstr(nullptr) {
SliceBuilder PB(DL, AI, *this);
SliceBuilder::PtrInfo PtrI = PB.visitPtr(AI);
if (PtrI.isEscaped() || PtrI.isAborted()) {
for (SmallVectorImpl<DbgValueInst *>::const_iterator I = DVIs.begin(),
E = DVIs.end(); I != E; ++I) {
DbgValueInst *DVI = *I;
- Value *Arg = 0;
+ Value *Arg = nullptr;
if (StoreInst *SI = dyn_cast<StoreInst>(Inst)) {
// If an argument is zero extended then use argument directly. The ZExt
// may be zapped by an optimization pass in future.
public:
SROA(bool RequiresDomTree = true)
: FunctionPass(ID), RequiresDomTree(RequiresDomTree),
- C(0), DL(0), DT(0) {
+ C(nullptr), DL(nullptr), DT(nullptr) {
initializeSROAPass(*PassRegistry::getPassRegistry());
}
bool runOnFunction(Function &F) override;
static Type *findCommonType(AllocaSlices::const_iterator B,
AllocaSlices::const_iterator E,
uint64_t EndOffset) {
- Type *Ty = 0;
+ Type *Ty = nullptr;
bool TyIsCommon = true;
- IntegerType *ITy = 0;
+ IntegerType *ITy = nullptr;
// Note that we need to look at *every* alloca slice's Use to ensure we
// always get consistent results regardless of the order of slices.
if (I->beginOffset() != B->beginOffset() || I->endOffset() != EndOffset)
continue;
- Type *UserTy = 0;
+ Type *UserTy = nullptr;
if (LoadInst *LI = dyn_cast<LoadInst>(U->getUser())) {
UserTy = LI->getType();
} else if (StoreInst *SI = dyn_cast<StoreInst>(U->getUser())) {
/// FIXME: This should be hoisted into a generic utility, likely in
/// Transforms/Util/Local.h
static bool isSafePHIToSpeculate(PHINode &PN,
- const DataLayout *DL = 0) {
+ const DataLayout *DL = nullptr) {
// For now, we can only do this promotion if the load is in the same block
// as the PHI, and if there are no stores between the phi and load.
// TODO: Allow recursive phi users.
bool HaveLoad = false;
for (User *U : PN.users()) {
LoadInst *LI = dyn_cast<LoadInst>(U);
- if (LI == 0 || !LI->isSimple())
+ if (!LI || !LI->isSimple())
return false;
// For now we only allow loads in the same block as the PHI. This is
///
/// We can do this to a select if its only uses are loads and if the operand
/// to the select can be loaded unconditionally.
-static bool isSafeSelectToSpeculate(SelectInst &SI, const DataLayout *DL = 0) {
+static bool isSafeSelectToSpeculate(SelectInst &SI,
+ const DataLayout *DL = nullptr) {
Value *TValue = SI.getTrueValue();
Value *FValue = SI.getFalseValue();
bool TDerefable = TValue->isDereferenceablePointer();
for (User *U : SI.users()) {
LoadInst *LI = dyn_cast<LoadInst>(U);
- if (LI == 0 || !LI->isSimple())
+ if (!LI || !LI->isSimple())
return false;
// Both operands to the select need to be dereferencable, either
// We can't recurse through pointer types.
if (Ty->isPointerTy())
- return 0;
+ return nullptr;
// We try to analyze GEPs over vectors here, but note that these GEPs are
// extremely poorly defined currently. The long-term goal is to remove GEPing
// over a vector from the IR completely.
if (VectorType *VecTy = dyn_cast<VectorType>(Ty)) {
unsigned ElementSizeInBits = DL.getTypeSizeInBits(VecTy->getScalarType());
- if (ElementSizeInBits % 8)
- return 0; // GEPs over non-multiple of 8 size vector elements are invalid.
+ if (ElementSizeInBits % 8 != 0) {
+ // GEPs over non-multiple of 8 size vector elements are invalid.
+ return nullptr;
+ }
APInt ElementSize(Offset.getBitWidth(), ElementSizeInBits / 8);
APInt NumSkippedElements = Offset.sdiv(ElementSize);
if (NumSkippedElements.ugt(VecTy->getNumElements()))
- return 0;
+ return nullptr;
Offset -= NumSkippedElements * ElementSize;
Indices.push_back(IRB.getInt(NumSkippedElements));
return getNaturalGEPRecursively(IRB, DL, Ptr, VecTy->getElementType(),
APInt ElementSize(Offset.getBitWidth(), DL.getTypeAllocSize(ElementTy));
APInt NumSkippedElements = Offset.sdiv(ElementSize);
if (NumSkippedElements.ugt(ArrTy->getNumElements()))
- return 0;
+ return nullptr;
Offset -= NumSkippedElements * ElementSize;
Indices.push_back(IRB.getInt(NumSkippedElements));
StructType *STy = dyn_cast<StructType>(Ty);
if (!STy)
- return 0;
+ return nullptr;
const StructLayout *SL = DL.getStructLayout(STy);
uint64_t StructOffset = Offset.getZExtValue();
if (StructOffset >= SL->getSizeInBytes())
- return 0;
+ return nullptr;
unsigned Index = SL->getElementContainingOffset(StructOffset);
Offset -= APInt(Offset.getBitWidth(), SL->getElementOffset(Index));
Type *ElementTy = STy->getElementType(Index);
if (Offset.uge(DL.getTypeAllocSize(ElementTy)))
- return 0; // The offset points into alignment padding.
+ return nullptr; // The offset points into alignment padding.
Indices.push_back(IRB.getInt32(Index));
return getNaturalGEPRecursively(IRB, DL, Ptr, ElementTy, Offset, TargetTy,
// Don't consider any GEPs through an i8* as natural unless the TargetTy is
// an i8.
if (Ty == IRB.getInt8PtrTy(Ty->getAddressSpace()) && TargetTy->isIntegerTy(8))
- return 0;
+ return nullptr;
Type *ElementTy = Ty->getElementType();
if (!ElementTy->isSized())
- return 0; // We can't GEP through an unsized element.
+ return nullptr; // We can't GEP through an unsized element.
APInt ElementSize(Offset.getBitWidth(), DL.getTypeAllocSize(ElementTy));
if (ElementSize == 0)
- return 0; // Zero-length arrays can't help us build a natural GEP.
+ return nullptr; // Zero-length arrays can't help us build a natural GEP.
APInt NumSkippedElements = Offset.sdiv(ElementSize);
Offset -= NumSkippedElements * ElementSize;
// We may end up computing an offset pointer that has the wrong type. If we
// never are able to compute one directly that has the correct type, we'll
// fall back to it, so keep it around here.
- Value *OffsetPtr = 0;
+ Value *OffsetPtr = nullptr;
// Remember any i8 pointer we come across to re-use if we need to do a raw
// byte offset.
- Value *Int8Ptr = 0;
+ Value *Int8Ptr = nullptr;
APInt Int8PtrOffset(Offset.getBitWidth(), 0);
Type *TargetTy = PointerTy->getPointerElementType();
NewAllocaBeginOffset(NewAllocaBeginOffset),
NewAllocaEndOffset(NewAllocaEndOffset),
NewAllocaTy(NewAI.getAllocatedType()),
- VecTy(IsVectorPromotable ? cast<VectorType>(NewAllocaTy) : 0),
- ElementTy(VecTy ? VecTy->getElementType() : 0),
+ VecTy(IsVectorPromotable ? cast<VectorType>(NewAllocaTy) : nullptr),
+ ElementTy(VecTy ? VecTy->getElementType() : nullptr),
ElementSize(VecTy ? DL.getTypeSizeInBits(ElementTy) / 8 : 0),
IntTy(IsIntegerPromotable
? Type::getIntNTy(
NewAI.getContext(),
DL.getTypeSizeInBits(NewAI.getAllocatedType()))
- : 0),
+ : nullptr),
BeginOffset(), EndOffset(), IsSplittable(), IsSplit(), OldUse(),
OldPtr(), PHIUsers(PHIUsers), SelectUsers(SelectUsers),
IRB(NewAI.getContext(), ConstantFolder()) {
///
/// You can optionally pass a type to this routine and if that type's ABI
/// alignment is itself suitable, this will return zero.
- unsigned getSliceAlign(Type *Ty = 0) {
+ unsigned getSliceAlign(Type *Ty = nullptr) {
unsigned NewAIAlign = NewAI.getAlignment();
if (!NewAIAlign)
NewAIAlign = DL.getABITypeAlignment(NewAI.getAllocatedType());
unsigned EndIndex = VecTy ? getIndex(NewEndOffset) : 0;
unsigned NumElements = EndIndex - BeginIndex;
IntegerType *SubIntTy
- = IntTy ? Type::getIntNTy(IntTy->getContext(), Size*8) : 0;
+ = IntTy ? Type::getIntNTy(IntTy->getContext(), Size*8) : nullptr;
// Reset the other pointer type to match the register type we're going to
// use, but using the address space of the original other pointer.
return stripAggregateTypeWrapping(DL, Ty);
if (Offset > DL.getTypeAllocSize(Ty) ||
(DL.getTypeAllocSize(Ty) - Offset) < Size)
- return 0;
+ return nullptr;
if (SequentialType *SeqTy = dyn_cast<SequentialType>(Ty)) {
// We can't partition pointers...
if (SeqTy->isPointerTy())
- return 0;
+ return nullptr;
Type *ElementTy = SeqTy->getElementType();
uint64_t ElementSize = DL.getTypeAllocSize(ElementTy);
uint64_t NumSkippedElements = Offset / ElementSize;
if (ArrayType *ArrTy = dyn_cast<ArrayType>(SeqTy)) {
if (NumSkippedElements >= ArrTy->getNumElements())
- return 0;
+ return nullptr;
} else if (VectorType *VecTy = dyn_cast<VectorType>(SeqTy)) {
if (NumSkippedElements >= VecTy->getNumElements())
- return 0;
+ return nullptr;
}
Offset -= NumSkippedElements * ElementSize;
if (Offset > 0 || Size < ElementSize) {
// Bail if the partition ends in a different array element.
if ((Offset + Size) > ElementSize)
- return 0;
+ return nullptr;
// Recurse through the element type trying to peel off offset bytes.
return getTypePartition(DL, ElementTy, Offset, Size);
}
assert(Size > ElementSize);
uint64_t NumElements = Size / ElementSize;
if (NumElements * ElementSize != Size)
- return 0;
+ return nullptr;
return ArrayType::get(ElementTy, NumElements);
}
StructType *STy = dyn_cast<StructType>(Ty);
if (!STy)
- return 0;
+ return nullptr;
const StructLayout *SL = DL.getStructLayout(STy);
if (Offset >= SL->getSizeInBytes())
- return 0;
+ return nullptr;
uint64_t EndOffset = Offset + Size;
if (EndOffset > SL->getSizeInBytes())
- return 0;
+ return nullptr;
unsigned Index = SL->getElementContainingOffset(Offset);
Offset -= SL->getElementOffset(Index);
Type *ElementTy = STy->getElementType(Index);
uint64_t ElementSize = DL.getTypeAllocSize(ElementTy);
if (Offset >= ElementSize)
- return 0; // The offset points into alignment padding.
+ return nullptr; // The offset points into alignment padding.
// See if any partition must be contained by the element.
if (Offset > 0 || Size < ElementSize) {
if ((Offset + Size) > ElementSize)
- return 0;
+ return nullptr;
return getTypePartition(DL, ElementTy, Offset, Size);
}
assert(Offset == 0);
if (EndOffset < SL->getSizeInBytes()) {
unsigned EndIndex = SL->getElementContainingOffset(EndOffset);
if (Index == EndIndex)
- return 0; // Within a single element and its padding.
+ return nullptr; // Within a single element and its padding.
// Don't try to form "natural" types if the elements don't line up with the
// expected size.
// FIXME: We could potentially recurse down through the last element in the
// sub-struct to find a natural end point.
if (SL->getElementOffset(EndIndex) != EndOffset)
- return 0;
+ return nullptr;
assert(Index < EndIndex);
EE = STy->element_begin() + EndIndex;
STy->isPacked());
const StructLayout *SubSL = DL.getStructLayout(SubTy);
if (Size != SubSL->getSizeInBytes())
- return 0; // The sub-struct doesn't have quite the size needed.
+ return nullptr; // The sub-struct doesn't have quite the size needed.
return SubTy;
}
// Try to compute a friendly type for this partition of the alloca. This
// won't always succeed, in which case we fall back to a legal integer type
// or an i8 array of an appropriate size.
- Type *SliceTy = 0;
+ Type *SliceTy = nullptr;
if (Type *CommonUseTy = findCommonType(B, E, EndOffset))
if (DL->getTypeAllocSize(CommonUseTy) >= SliceSize)
SliceTy = CommonUseTy;
// the alloca's alignment unconstrained.
if (Alignment <= DL->getABITypeAlignment(SliceTy))
Alignment = 0;
- NewAI = new AllocaInst(SliceTy, 0, Alignment,
+ NewAI = new AllocaInst(SliceTy, nullptr, Alignment,
AI.getName() + ".sroa." + Twine(B - S.begin()), &AI);
++NumNewAllocas;
}
for (Use &Operand : I->operands())
if (Instruction *U = dyn_cast<Instruction>(Operand)) {
// Zero out the operand and see if it becomes trivially dead.
- Operand = 0;
+ Operand = nullptr;
if (isInstructionTriviallyDead(U))
DeadInsts.insert(U);
}
DL = &DLP->getDataLayout();
DominatorTreeWrapperPass *DTWP =
getAnalysisIfAvailable<DominatorTreeWrapperPass>();
- DT = DTWP ? &DTWP->getDomTree() : 0;
+ DT = DTWP ? &DTWP->getDomTree() : nullptr;
BasicBlock &EntryBB = F.getEntryBlock();
for (BasicBlock::iterator I = EntryBB.begin(), E = std::prev(EntryBB.end());
projects / oota-llvm.git / blobdiff