// float4 fhi = (float4) hi - (0x1.0p39f + 0x1.0p23f);
// return (float4) lo + fhi;
+ // We shouldn't use it when unsafe-fp-math is enabled though: we might later
+ // reassociate the two FADDs, and if we do that, the algorithm fails
+ // spectacularly (PR24512).
+ // FIXME: If we ever have some kind of Machine FMF, this should be marked
+ // as non-fast and always be enabled. Why isn't SDAG FMF enough? Because
+ // there's also the MachineCombiner reassociations happening on Machine IR.
+ if (DAG.getTarget().Options.UnsafeFPMath)
+ return SDValue();
+
SDLoc DL(Op);
SDValue V = Op->getOperand(0);
EVT VecIntVT = V.getValueType();
return Sext;
}
- // Otherwise we'll shuffle the small elements in the high bits of the
- // larger type and perform an arithmetic shift. If the shift is not legal
- // it's better to scalarize.
- assert(TLI.isOperationLegalOrCustom(ISD::SRA, RegVT) &&
- "We can't implement a sext load without an arithmetic right shift!");
-
- // Redistribute the loaded elements into the different locations.
- SmallVector<int, 16> ShuffleVec(NumElems * SizeRatio, -1);
- for (unsigned i = 0; i != NumElems; ++i)
- ShuffleVec[i * SizeRatio + SizeRatio - 1] = i;
-
- SDValue Shuff = DAG.getVectorShuffle(
- WideVecVT, dl, SlicedVec, DAG.getUNDEF(WideVecVT), &ShuffleVec[0]);
-
- Shuff = DAG.getBitcast(RegVT, Shuff);
-
- // Build the arithmetic shift.
- unsigned Amt = RegVT.getVectorElementType().getSizeInBits() -
- MemVT.getVectorElementType().getSizeInBits();
- Shuff =
- DAG.getNode(ISD::SRA, dl, RegVT, Shuff,
- DAG.getConstant(Amt, dl, RegVT));
+ // Otherwise we'll use SIGN_EXTEND_VECTOR_INREG to sign extend the lowest
+ // lanes.
+ assert(TLI.isOperationLegalOrCustom(ISD::SIGN_EXTEND_VECTOR_INREG, RegVT) &&
+ "We can't implement a sext load without SIGN_EXTEND_VECTOR_INREG!");
+ SDValue Shuff = DAG.getSignExtendVectorInReg(SlicedVec, dl, RegVT);
DAG.ReplaceAllUsesOfValueWith(SDValue(Ld, 1), TF);
return Shuff;
}
// i64 SRA needs to be performed as partial shifts.
if ((VT == MVT::v2i64 || (Subtarget->hasInt256() && VT == MVT::v4i64)) &&
- Op.getOpcode() == ISD::SRA)
+ Op.getOpcode() == ISD::SRA && !Subtarget->hasXOP())
return ArithmeticShiftRight64(ShiftAmt);
if (VT == MVT::v16i8 || (Subtarget->hasInt256() && VT == MVT::v32i8)) {
unsigned NumElts = VT.getVectorNumElements();
MVT ShiftVT = MVT::getVectorVT(MVT::i16, NumElts / 2);
- if (Op.getOpcode() == ISD::SHL) {
- // Simple i8 add case
- if (ShiftAmt == 1)
- return DAG.getNode(ISD::ADD, dl, VT, R, R);
+ // Simple i8 add case
+ if (Op.getOpcode() == ISD::SHL && ShiftAmt == 1)
+ return DAG.getNode(ISD::ADD, dl, VT, R, R);
+
+ // ashr(R, 7) === cmp_slt(R, 0)
+ if (Op.getOpcode() == ISD::SRA && ShiftAmt == 7) {
+ SDValue Zeros = getZeroVector(VT, Subtarget, DAG, dl);
+ return DAG.getNode(X86ISD::PCMPGT, dl, VT, Zeros, R);
+ }
+ // XOP can shift v16i8 directly instead of as shift v8i16 + mask.
+ if (VT == MVT::v16i8 && Subtarget->hasXOP())
+ return SDValue();
+
+ if (Op.getOpcode() == ISD::SHL) {
// Make a large shift.
SDValue SHL = getTargetVShiftByConstNode(X86ISD::VSHLI, dl, ShiftVT,
R, ShiftAmt, DAG);
DAG.getNode(ISD::BUILD_VECTOR, dl, VT, V));
}
if (Op.getOpcode() == ISD::SRA) {
- if (ShiftAmt == 7) {
- // ashr(R, 7) === cmp_slt(R, 0)
- SDValue Zeros = getZeroVector(VT, Subtarget, DAG, dl);
- return DAG.getNode(X86ISD::PCMPGT, dl, VT, Zeros, R);
- }
-
// ashr(R, Amt) === sub(xor(lshr(R, Amt), Mask), Mask)
SDValue Res = DAG.getNode(ISD::SRL, dl, VT, R, Amt);
SmallVector<SDValue, 32> V(NumElts,
}
// Special case in 32-bit mode, where i64 is expanded into high and low parts.
- if (!Subtarget->is64Bit() &&
+ if (!Subtarget->is64Bit() && !Subtarget->hasXOP() &&
(VT == MVT::v2i64 || (Subtarget->hasInt256() && VT == MVT::v4i64))) {
// Peek through any splat that was introduced for i64 shift vectorization.
return V;
if (SDValue V = LowerScalarVariableShift(Op, DAG, Subtarget))
- return V;
+ return V;
if (SupportedVectorVarShift(VT, Subtarget, Op.getOpcode()))
return Op;
+ // XOP has 128-bit variable logical/arithmetic shifts.
+ // +ve/-ve Amt = shift left/right.
+ if (Subtarget->hasXOP() &&
+ (VT == MVT::v2i64 || VT == MVT::v4i32 ||
+ VT == MVT::v8i16 || VT == MVT::v16i8)) {
+ if (Op.getOpcode() == ISD::SRL || Op.getOpcode() == ISD::SRA) {
+ SDValue Zero = getZeroVector(VT, Subtarget, DAG, dl);
+ Amt = DAG.getNode(ISD::SUB, dl, VT, Zero, Amt);
+ }
+ if (Op.getOpcode() == ISD::SHL || Op.getOpcode() == ISD::SRL)
+ return DAG.getNode(X86ISD::VPSHL, dl, VT, R, Amt);
+ if (Op.getOpcode() == ISD::SRA)
+ return DAG.getNode(X86ISD::VPSHA, dl, VT, R, Amt);
+ }
+
// 2i64 vector logical shifts can efficiently avoid scalarization - do the
// shifts per-lane and then shuffle the partial results back together.
if (VT == MVT::v2i64 && Op.getOpcode() != ISD::SRA) {
return DAG.getVectorShuffle(VT, dl, R02, R13, {0, 5, 2, 7});
}
- if (VT == MVT::v16i8 || (VT == MVT::v32i8 && Subtarget->hasInt256())) {
+ if (VT == MVT::v16i8 ||
+ (VT == MVT::v32i8 && Subtarget->hasInt256() && !Subtarget->hasXOP())) {
MVT ExtVT = MVT::getVectorVT(MVT::i16, VT.getVectorNumElements() / 2);
unsigned ShiftOpcode = Op->getOpcode();
DAG.getNode(Op.getOpcode(), dl, ExtVT, R, Amt));
}
- if (Subtarget->hasInt256() && VT == MVT::v16i16) {
+ if (Subtarget->hasInt256() && !Subtarget->hasXOP() && VT == MVT::v16i16) {
MVT ExtVT = MVT::v8i32;
SDValue Z = getZeroVector(VT, Subtarget, DAG, dl);
SDValue ALo = DAG.getNode(X86ISD::UNPCKL, dl, VT, Amt, Z);
case X86ISD::RDSEED: return "X86ISD::RDSEED";
case X86ISD::VPMADDUBSW: return "X86ISD::VPMADDUBSW";
case X86ISD::VPMADDWD: return "X86ISD::VPMADDWD";
+ case X86ISD::VPSHA: return "X86ISD::VPSHA";
+ case X86ISD::VPSHL: return "X86ISD::VPSHL";
case X86ISD::FMADD: return "X86ISD::FMADD";
case X86ISD::FMSUB: return "X86ISD::FMSUB";
case X86ISD::FNMADD: return "X86ISD::FNMADD";
projects / oota-llvm.git / blobdiff