#include "llvm/CodeGen/SelectionDAG.h"
#include "llvm/CodeGen/SSARegMap.h"
#include "llvm/Support/MathExtras.h"
+#include "llvm/Support/CommandLine.h"
+#include "llvm/Support/Debug.h"
#include "llvm/Target/TargetOptions.h"
#include "llvm/ADT/StringExtras.h"
#include "llvm/ParameterAttributes.h"
X86TargetLowering::X86TargetLowering(TargetMachine &TM)
: TargetLowering(TM) {
Subtarget = &TM.getSubtarget<X86Subtarget>();
- X86ScalarSSE = Subtarget->hasSSE2();
+ X86ScalarSSEf64 = Subtarget->hasSSE2();
+ X86ScalarSSEf32 = Subtarget->hasSSE1();
X86StackPtr = Subtarget->is64Bit() ? X86::RSP : X86::ESP;
+
RegInfo = TM.getRegisterInfo();
setOperationAction(ISD::UINT_TO_FP , MVT::i64 , Expand);
setOperationAction(ISD::UINT_TO_FP , MVT::i32 , Promote);
} else {
- if (X86ScalarSSE)
+ if (X86ScalarSSEf64)
// If SSE i64 SINT_TO_FP is not available, expand i32 UINT_TO_FP.
setOperationAction(ISD::UINT_TO_FP , MVT::i32 , Expand);
else
setOperationAction(ISD::SINT_TO_FP , MVT::i1 , Promote);
setOperationAction(ISD::SINT_TO_FP , MVT::i8 , Promote);
// SSE has no i16 to fp conversion, only i32
- if (X86ScalarSSE) {
+ if (X86ScalarSSEf32) {
setOperationAction(ISD::SINT_TO_FP , MVT::i16 , Promote);
// f32 and f64 cases are Legal, f80 case is not
setOperationAction(ISD::SINT_TO_FP , MVT::i32 , Custom);
setOperationAction(ISD::SINT_TO_FP , MVT::i32 , Custom);
}
- if (!Subtarget->is64Bit()) {
- // Custom lower SINT_TO_FP and FP_TO_SINT from/to i64 in 32-bit mode.
- setOperationAction(ISD::SINT_TO_FP , MVT::i64 , Custom);
- setOperationAction(ISD::FP_TO_SINT , MVT::i64 , Custom);
- }
+ // In 32-bit mode these are custom lowered. In 64-bit mode F32 and F64
+ // are Legal, f80 is custom lowered.
+ setOperationAction(ISD::FP_TO_SINT , MVT::i64 , Custom);
+ setOperationAction(ISD::SINT_TO_FP , MVT::i64 , Custom);
// Promote i1/i8 FP_TO_SINT to larger FP_TO_SINTS's, as X86 doesn't have
// this operation.
setOperationAction(ISD::FP_TO_SINT , MVT::i1 , Promote);
setOperationAction(ISD::FP_TO_SINT , MVT::i8 , Promote);
- if (X86ScalarSSE) {
+ if (X86ScalarSSEf32) {
setOperationAction(ISD::FP_TO_SINT , MVT::i16 , Promote);
// f32 and f64 cases are Legal, f80 case is not
setOperationAction(ISD::FP_TO_SINT , MVT::i32 , Custom);
setOperationAction(ISD::FP_TO_UINT , MVT::i64 , Expand);
setOperationAction(ISD::FP_TO_UINT , MVT::i32 , Promote);
} else {
- if (X86ScalarSSE && !Subtarget->hasSSE3())
+ if (X86ScalarSSEf32 && !Subtarget->hasSSE3())
// Expand FP_TO_UINT into a select.
// FIXME: We would like to use a Custom expander here eventually to do
// the optimal thing for SSE vs. the default expansion in the legalizer.
}
// TODO: when we have SSE, these could be more efficient, by using movd/movq.
- if (!X86ScalarSSE) {
+ if (!X86ScalarSSEf64) {
setOperationAction(ISD::BIT_CONVERT , MVT::f32 , Expand);
setOperationAction(ISD::BIT_CONVERT , MVT::i32 , Expand);
}
+ // Scalar integer multiply, multiply-high, divide, and remainder are
+ // lowered to use operations that produce two results, to match the
+ // available instructions. This exposes the two-result form to trivial
+ // CSE, which is able to combine x/y and x%y into a single instruction,
+ // for example. The single-result multiply instructions are introduced
+ // in X86ISelDAGToDAG.cpp, after CSE, for uses where the the high part
+ // is not needed.
+ setOperationAction(ISD::MUL , MVT::i8 , Expand);
+ setOperationAction(ISD::MULHS , MVT::i8 , Expand);
+ setOperationAction(ISD::MULHU , MVT::i8 , Expand);
+ setOperationAction(ISD::SDIV , MVT::i8 , Expand);
+ setOperationAction(ISD::UDIV , MVT::i8 , Expand);
+ setOperationAction(ISD::SREM , MVT::i8 , Expand);
+ setOperationAction(ISD::UREM , MVT::i8 , Expand);
+ setOperationAction(ISD::MUL , MVT::i16 , Expand);
+ setOperationAction(ISD::MULHS , MVT::i16 , Expand);
+ setOperationAction(ISD::MULHU , MVT::i16 , Expand);
+ setOperationAction(ISD::SDIV , MVT::i16 , Expand);
+ setOperationAction(ISD::UDIV , MVT::i16 , Expand);
+ setOperationAction(ISD::SREM , MVT::i16 , Expand);
+ setOperationAction(ISD::UREM , MVT::i16 , Expand);
+ setOperationAction(ISD::MUL , MVT::i32 , Expand);
+ setOperationAction(ISD::MULHS , MVT::i32 , Expand);
+ setOperationAction(ISD::MULHU , MVT::i32 , Expand);
+ setOperationAction(ISD::SDIV , MVT::i32 , Expand);
+ setOperationAction(ISD::UDIV , MVT::i32 , Expand);
+ setOperationAction(ISD::SREM , MVT::i32 , Expand);
+ setOperationAction(ISD::UREM , MVT::i32 , Expand);
+ setOperationAction(ISD::MUL , MVT::i64 , Expand);
+ setOperationAction(ISD::MULHS , MVT::i64 , Expand);
+ setOperationAction(ISD::MULHU , MVT::i64 , Expand);
+ setOperationAction(ISD::SDIV , MVT::i64 , Expand);
+ setOperationAction(ISD::UDIV , MVT::i64 , Expand);
+ setOperationAction(ISD::SREM , MVT::i64 , Expand);
+ setOperationAction(ISD::UREM , MVT::i64 , Expand);
+
setOperationAction(ISD::BR_JT , MVT::Other, Expand);
setOperationAction(ISD::BRCOND , MVT::Other, Custom);
setOperationAction(ISD::BR_CC , MVT::Other, Expand);
setOperationAction(ISD::SIGN_EXTEND_INREG, MVT::i1 , Expand);
setOperationAction(ISD::FP_ROUND_INREG , MVT::f32 , Expand);
setOperationAction(ISD::FREM , MVT::f64 , Expand);
-
+ setOperationAction(ISD::FLT_ROUNDS , MVT::i32 , Custom);
+
setOperationAction(ISD::CTPOP , MVT::i8 , Expand);
setOperationAction(ISD::CTTZ , MVT::i8 , Expand);
setOperationAction(ISD::CTLZ , MVT::i8 , Expand);
setOperationAction(ISD::MEMSET , MVT::Other, Custom);
setOperationAction(ISD::MEMCPY , MVT::Other, Custom);
- // We don't have line number support yet.
+ // Use the default ISD::LOCATION expansion.
setOperationAction(ISD::LOCATION, MVT::Other, Expand);
- setOperationAction(ISD::DEBUG_LOC, MVT::Other, Expand);
// FIXME - use subtarget debug flags
if (!Subtarget->isTargetDarwin() &&
!Subtarget->isTargetELF() &&
else
setOperationAction(ISD::DYNAMIC_STACKALLOC, MVT::i32, Expand);
- if (X86ScalarSSE) {
+ if (X86ScalarSSEf64) {
+ // f32 and f64 use SSE.
// Set up the FP register classes.
addRegisterClass(MVT::f32, X86::FR32RegisterClass);
addRegisterClass(MVT::f64, X86::FR64RegisterClass);
// cases we handle.
setOperationAction(ISD::ConstantFP, MVT::f64, Expand);
setOperationAction(ISD::ConstantFP, MVT::f32, Expand);
- addLegalFPImmediate(APFloat(+0.0)); // xorps / xorpd
+ addLegalFPImmediate(APFloat(+0.0)); // xorpd
+ addLegalFPImmediate(APFloat(+0.0f)); // xorps
// Conversions to long double (in X87) go through memory.
setConvertAction(MVT::f32, MVT::f80, Expand);
// Conversions from long double (in X87) go through memory.
setConvertAction(MVT::f80, MVT::f32, Expand);
setConvertAction(MVT::f80, MVT::f64, Expand);
+ } else if (X86ScalarSSEf32) {
+ // Use SSE for f32, x87 for f64.
+ // Set up the FP register classes.
+ addRegisterClass(MVT::f32, X86::FR32RegisterClass);
+ addRegisterClass(MVT::f64, X86::RFP64RegisterClass);
+
+ // Use ANDPS to simulate FABS.
+ setOperationAction(ISD::FABS , MVT::f32, Custom);
+
+ // Use XORP to simulate FNEG.
+ setOperationAction(ISD::FNEG , MVT::f32, Custom);
+
+ setOperationAction(ISD::UNDEF, MVT::f64, Expand);
+
+ // Use ANDPS and ORPS to simulate FCOPYSIGN.
+ setOperationAction(ISD::FCOPYSIGN, MVT::f64, Expand);
+ setOperationAction(ISD::FCOPYSIGN, MVT::f32, Custom);
+
+ // We don't support sin/cos/fmod
+ setOperationAction(ISD::FSIN , MVT::f32, Expand);
+ setOperationAction(ISD::FCOS , MVT::f32, Expand);
+ setOperationAction(ISD::FREM , MVT::f32, Expand);
+
+ // Expand FP immediates into loads from the stack, except for the special
+ // cases we handle.
+ setOperationAction(ISD::ConstantFP, MVT::f64, Expand);
+ setOperationAction(ISD::ConstantFP, MVT::f32, Expand);
+ addLegalFPImmediate(APFloat(+0.0f)); // xorps
+ addLegalFPImmediate(APFloat(+0.0)); // FLD0
+ addLegalFPImmediate(APFloat(+1.0)); // FLD1
+ addLegalFPImmediate(APFloat(-0.0)); // FLD0/FCHS
+ addLegalFPImmediate(APFloat(-1.0)); // FLD1/FCHS
+
+ // SSE->x87 conversions go through memory.
+ setConvertAction(MVT::f32, MVT::f64, Expand);
+ setConvertAction(MVT::f32, MVT::f80, Expand);
+
+ // x87->SSE truncations need to go through memory.
+ setConvertAction(MVT::f80, MVT::f32, Expand);
+ setConvertAction(MVT::f64, MVT::f32, Expand);
+ // And x87->x87 truncations also.
+ setConvertAction(MVT::f80, MVT::f64, Expand);
+
+ if (!UnsafeFPMath) {
+ setOperationAction(ISD::FSIN , MVT::f64 , Expand);
+ setOperationAction(ISD::FCOS , MVT::f64 , Expand);
+ }
} else {
+ // f32 and f64 in x87.
// Set up the FP register classes.
addRegisterClass(MVT::f64, X86::RFP64RegisterClass);
addRegisterClass(MVT::f32, X86::RFP32RegisterClass);
addLegalFPImmediate(APFloat(+1.0)); // FLD1
addLegalFPImmediate(APFloat(-0.0)); // FLD0/FCHS
addLegalFPImmediate(APFloat(-1.0)); // FLD1/FCHS
+ addLegalFPImmediate(APFloat(+0.0f)); // FLD0
+ addLegalFPImmediate(APFloat(+1.0f)); // FLD1
+ addLegalFPImmediate(APFloat(-0.0f)); // FLD0/FCHS
+ addLegalFPImmediate(APFloat(-1.0f)); // FLD1/FCHS
}
// Long double always uses X87.
setOperationAction(ISD::UNDEF, MVT::f80, Expand);
setOperationAction(ISD::FCOPYSIGN, MVT::f80, Expand);
setOperationAction(ISD::ConstantFP, MVT::f80, Expand);
+ if (!UnsafeFPMath) {
+ setOperationAction(ISD::FSIN , MVT::f80 , Expand);
+ setOperationAction(ISD::FCOS , MVT::f80 , Expand);
+ }
+
+ // Always use a library call for pow.
+ setOperationAction(ISD::FPOW , MVT::f32 , Expand);
+ setOperationAction(ISD::FPOW , MVT::f64 , Expand);
+ setOperationAction(ISD::FPOW , MVT::f80 , Expand);
// First set operation action for all vector types to expand. Then we
// will selectively turn on ones that can be effectively codegen'd.
setOperationAction(ISD::FPOWI, (MVT::ValueType)VT, Expand);
setOperationAction(ISD::FSQRT, (MVT::ValueType)VT, Expand);
setOperationAction(ISD::FCOPYSIGN, (MVT::ValueType)VT, Expand);
+ setOperationAction(ISD::SMUL_LOHI, (MVT::ValueType)VT, Expand);
+ setOperationAction(ISD::UMUL_LOHI, (MVT::ValueType)VT, Expand);
+ setOperationAction(ISD::SDIVREM, (MVT::ValueType)VT, Expand);
+ setOperationAction(ISD::UDIVREM, (MVT::ValueType)VT, Expand);
+ setOperationAction(ISD::FPOW, (MVT::ValueType)VT, Expand);
+ setOperationAction(ISD::CTPOP, (MVT::ValueType)VT, Expand);
+ setOperationAction(ISD::CTTZ, (MVT::ValueType)VT, Expand);
+ setOperationAction(ISD::CTLZ, (MVT::ValueType)VT, Expand);
}
if (Subtarget->hasMMX()) {
setOperationAction(ISD::SUB, MVT::v8i8, Legal);
setOperationAction(ISD::SUB, MVT::v4i16, Legal);
setOperationAction(ISD::SUB, MVT::v2i32, Legal);
+ setOperationAction(ISD::SUB, MVT::v1i64, Legal);
setOperationAction(ISD::MULHS, MVT::v4i16, Legal);
setOperationAction(ISD::MUL, MVT::v4i16, Legal);
setOperationAction(ISD::VECTOR_SHUFFLE, MVT::v2f64, Custom);
setOperationAction(ISD::VECTOR_SHUFFLE, MVT::v2i64, Custom);
setOperationAction(ISD::EXTRACT_VECTOR_ELT, MVT::v2f64, Custom);
- setOperationAction(ISD::EXTRACT_VECTOR_ELT, MVT::v2i64, Custom);
+ if (Subtarget->is64Bit())
+ setOperationAction(ISD::EXTRACT_VECTOR_ELT, MVT::v2i64, Custom);
// Promote v16i8, v8i16, v4i32 load, select, and, or, xor to v2i64.
for (unsigned VT = (unsigned)MVT::v16i8; VT != (unsigned)MVT::v2i64; VT++) {
}
+/// getPICJumpTableRelocaBase - Returns relocation base for the given PIC
+/// jumptable.
+SDOperand X86TargetLowering::getPICJumpTableRelocBase(SDOperand Table,
+ SelectionDAG &DAG) const {
+ if (usesGlobalOffsetTable())
+ return DAG.getNode(ISD::GLOBAL_OFFSET_TABLE, getPointerTy());
+ if (!Subtarget->isPICStyleRIPRel())
+ return DAG.getNode(X86ISD::GlobalBaseReg, getPointerTy());
+ return Table;
+}
+
//===----------------------------------------------------------------------===//
// Return Value Calling Convention Implementation
//===----------------------------------------------------------------------===//
#include "X86GenCallingConv.inc"
+
+/// GetPossiblePreceedingTailCall - Get preceeding X86ISD::TAILCALL node if it
+/// exists skip possible ISD:TokenFactor.
+static SDOperand GetPossiblePreceedingTailCall(SDOperand Chain) {
+ if (Chain.getOpcode()==X86ISD::TAILCALL) {
+ return Chain;
+ } else if (Chain.getOpcode()==ISD::TokenFactor) {
+ if (Chain.getNumOperands() &&
+ Chain.getOperand(0).getOpcode()==X86ISD::TAILCALL)
+ return Chain.getOperand(0);
+ }
+ return Chain;
+}
/// LowerRET - Lower an ISD::RET node.
SDOperand X86TargetLowering::LowerRET(SDOperand Op, SelectionDAG &DAG) {
bool isVarArg = DAG.getMachineFunction().getFunction()->isVarArg();
CCState CCInfo(CC, isVarArg, getTargetMachine(), RVLocs);
CCInfo.AnalyzeReturn(Op.Val, RetCC_X86);
-
-
+
// If this is the first return lowered for this function, add the regs to the
// liveout set for the function.
if (DAG.getMachineFunction().liveout_empty()) {
if (RVLocs[i].isRegLoc())
DAG.getMachineFunction().addLiveOut(RVLocs[i].getLocReg());
}
-
SDOperand Chain = Op.getOperand(0);
- SDOperand Flag;
+ // Handle tail call return.
+ Chain = GetPossiblePreceedingTailCall(Chain);
+ if (Chain.getOpcode() == X86ISD::TAILCALL) {
+ SDOperand TailCall = Chain;
+ SDOperand TargetAddress = TailCall.getOperand(1);
+ SDOperand StackAdjustment = TailCall.getOperand(2);
+ assert ( ((TargetAddress.getOpcode() == ISD::Register &&
+ (cast<RegisterSDNode>(TargetAddress)->getReg() == X86::ECX ||
+ cast<RegisterSDNode>(TargetAddress)->getReg() == X86::R9)) ||
+ TargetAddress.getOpcode() == ISD::TargetExternalSymbol ||
+ TargetAddress.getOpcode() == ISD::TargetGlobalAddress) &&
+ "Expecting an global address, external symbol, or register");
+ assert( StackAdjustment.getOpcode() == ISD::Constant &&
+ "Expecting a const value");
+
+ SmallVector<SDOperand,8> Operands;
+ Operands.push_back(Chain.getOperand(0));
+ Operands.push_back(TargetAddress);
+ Operands.push_back(StackAdjustment);
+ // Copy registers used by the call. Last operand is a flag so it is not
+ // copied.
+ for (unsigned i=3; i < TailCall.getNumOperands()-1; i++) {
+ Operands.push_back(Chain.getOperand(i));
+ }
+ return DAG.getNode(X86ISD::TC_RETURN, MVT::Other, &Operands[0],
+ Operands.size());
+ }
+
+ // Regular return.
+ SDOperand Flag;
+
// Copy the result values into the output registers.
if (RVLocs.size() != 1 || !RVLocs[0].isRegLoc() ||
RVLocs[0].getLocReg() != X86::ST0) {
// If this is an FP return with ScalarSSE, we need to move the value from
// an XMM register onto the fp-stack.
- if (X86ScalarSSE) {
+ if ((X86ScalarSSEf32 && RVLocs[0].getValVT()==MVT::f32) ||
+ (X86ScalarSSEf64 && RVLocs[0].getValVT()==MVT::f64)) {
SDOperand MemLoc;
-
+
// If this is a load into a scalarsse value, don't store the loaded value
// back to the stack, only to reload it: just replace the scalar-sse load.
if (ISD::isNON_EXTLoad(Value.Val) &&
// If we are using ScalarSSE, store ST(0) to the stack and reload it into
// an XMM register.
- if (X86ScalarSSE) {
+ if ((X86ScalarSSEf32 && RVLocs[0].getValVT() == MVT::f32) ||
+ (X86ScalarSSEf64 && RVLocs[0].getValVT() == MVT::f64)) {
// FIXME: Currently the FST is flagged to the FP_GET_RESULT. This
// shouldn't be necessary except that RFP cannot be live across
// multiple blocks. When stackifier is fixed, they can be uncoupled.
//===----------------------------------------------------------------------===//
-// C & StdCall Calling Convention implementation
+// C & StdCall & Fast Calling Convention implementation
//===----------------------------------------------------------------------===//
// StdCall calling convention seems to be standard for many Windows' API
// routines and around. It differs from C calling convention just a little:
// callee should clean up the stack, not caller. Symbols should be also
// decorated in some fancy way :) It doesn't support any vector arguments.
+// For info on fast calling convention see Fast Calling Convention (tail call)
+// implementation LowerX86_32FastCCCallTo.
/// AddLiveIn - This helper function adds the specified physical register to the
/// MachineFunction as a live in value. It also creates a corresponding virtual
return VReg;
}
+// align stack arguments according to platform alignment needed for tail calls
+unsigned GetAlignedArgumentStackSize(unsigned StackSize, SelectionDAG& DAG);
+
SDOperand X86TargetLowering::LowerMemArgument(SDOperand Op, SelectionDAG &DAG,
const CCValAssign &VA,
MachineFrameInfo *MFI,
MachineFrameInfo *MFI = MF.getFrameInfo();
SDOperand Root = Op.getOperand(0);
bool isVarArg = cast<ConstantSDNode>(Op.getOperand(2))->getValue() != 0;
-
+ unsigned CC = MF.getFunction()->getCallingConv();
// Assign locations to all of the incoming arguments.
SmallVector<CCValAssign, 16> ArgLocs;
- CCState CCInfo(MF.getFunction()->getCallingConv(), isVarArg,
+ CCState CCInfo(CC, isVarArg,
getTargetMachine(), ArgLocs);
- CCInfo.AnalyzeFormalArguments(Op.Val, CC_X86_32_C);
-
+ // Check for possible tail call calling convention.
+ if (CC == CallingConv::Fast && PerformTailCallOpt)
+ CCInfo.AnalyzeFormalArguments(Op.Val, CC_X86_32_TailCall);
+ else
+ CCInfo.AnalyzeFormalArguments(Op.Val, CC_X86_32_C);
+
SmallVector<SDOperand, 8> ArgValues;
unsigned LastVal = ~0U;
for (unsigned i = 0, e = ArgLocs.size(); i != e; ++i) {
}
unsigned StackSize = CCInfo.getNextStackOffset();
+ // align stack specially for tail calls
+ if (CC==CallingConv::Fast)
+ StackSize = GetAlignedArgumentStackSize(StackSize,DAG);
ArgValues.push_back(Root);
if (isVarArg)
VarArgsFrameIndex = MFI->CreateFixedObject(1, StackSize);
- if (isStdCall && !isVarArg) {
+ // Tail call calling convention (CallingConv::Fast) does not support varargs.
+ assert( !(isVarArg && CC == CallingConv::Fast) &&
+ "CallingConv::Fast does not support varargs.");
+
+ if (isStdCall && !isVarArg &&
+ (CC==CallingConv::Fast && PerformTailCallOpt || CC!=CallingConv::Fast)) {
BytesToPopOnReturn = StackSize; // Callee pops everything..
BytesCallerReserves = 0;
} else {
unsigned CC) {
SDOperand Chain = Op.getOperand(0);
bool isVarArg = cast<ConstantSDNode>(Op.getOperand(2))->getValue() != 0;
- bool isTailCall = cast<ConstantSDNode>(Op.getOperand(3))->getValue() != 0;
SDOperand Callee = Op.getOperand(4);
unsigned NumOps = (Op.getNumOperands() - 5) / 2;
-
+
// Analyze operands of the call, assigning locations to each operand.
SmallVector<CCValAssign, 16> ArgLocs;
CCState CCInfo(CC, isVarArg, getTargetMachine(), ArgLocs);
- CCInfo.AnalyzeCallOperands(Op.Val, CC_X86_32_C);
+ if(CC==CallingConv::Fast && PerformTailCallOpt)
+ CCInfo.AnalyzeCallOperands(Op.Val, CC_X86_32_TailCall);
+ else
+ CCInfo.AnalyzeCallOperands(Op.Val, CC_X86_32_C);
// Get a count of how many bytes are to be pushed on the stack.
unsigned NumBytes = CCInfo.getNextStackOffset();
+ if (CC==CallingConv::Fast)
+ NumBytes = GetAlignedArgumentStackSize(NumBytes, DAG);
Chain = DAG.getCALLSEQ_START(Chain,DAG.getConstant(NumBytes, getPointerTy()));
assert(VA.isMemLoc());
if (StackPtr.Val == 0)
StackPtr = DAG.getRegister(getStackPtrReg(), getPointerTy());
- SDOperand PtrOff = DAG.getConstant(VA.getLocMemOffset(), getPointerTy());
- PtrOff = DAG.getNode(ISD::ADD, getPointerTy(), StackPtr, PtrOff);
- MemOpChains.push_back(DAG.getStore(Chain, Arg, PtrOff, NULL, 0));
+
+ MemOpChains.push_back(LowerMemOpCallTo(Op, DAG, StackPtr, VA, Chain,
+ Arg));
}
}
if (InFlag.Val)
Ops.push_back(InFlag);
-
- Chain = DAG.getNode(isTailCall ? X86ISD::TAILCALL : X86ISD::CALL,
- NodeTys, &Ops[0], Ops.size());
+
+ Chain = DAG.getNode(X86ISD::CALL, NodeTys, &Ops[0], Ops.size());
InFlag = Chain.getValue(1);
// Create the CALLSEQ_END node.
unsigned NumBytesForCalleeToPush = 0;
- if (CC == CallingConv::X86_StdCall) {
+ if (CC == CallingConv::X86_StdCall ||
+ (CC == CallingConv::Fast && PerformTailCallOpt)) {
if (isVarArg)
NumBytesForCalleeToPush = isSRet ? 4 : 0;
else
NumBytesForCalleeToPush = NumBytes;
+ assert(!(isVarArg && CC==CallingConv::Fast) &&
+ "CallingConv::Fast does not support varargs.");
} else {
// If this is is a call to a struct-return function, the callee
// pops the hidden struct pointer, so we have to push it back.
// This is common for Darwin/X86, Linux & Mingw32 targets.
NumBytesForCalleeToPush = isSRet ? 4 : 0;
}
-
- NodeTys = DAG.getVTList(MVT::Other, MVT::Flag);
- Ops.clear();
- Ops.push_back(Chain);
- Ops.push_back(DAG.getConstant(NumBytes, getPointerTy()));
- Ops.push_back(DAG.getConstant(NumBytesForCalleeToPush, getPointerTy()));
- Ops.push_back(InFlag);
- Chain = DAG.getNode(ISD::CALLSEQ_END, NodeTys, &Ops[0], Ops.size());
+
+ Chain = DAG.getCALLSEQ_END(Chain,
+ DAG.getConstant(NumBytes, getPointerTy()),
+ DAG.getConstant(NumBytesForCalleeToPush,
+ getPointerTy()),
+ InFlag);
InFlag = Chain.getValue(1);
// Handle result values, copying them out of physregs into vregs that we
ArgValues.push_back(ArgValue);
} else {
assert(VA.isMemLoc());
-
- // Create the nodes corresponding to a load from this parameter slot.
- int FI = MFI->CreateFixedObject(MVT::getSizeInBits(VA.getValVT())/8,
- VA.getLocMemOffset());
- SDOperand FIN = DAG.getFrameIndex(FI, getPointerTy());
- ArgValues.push_back(DAG.getLoad(VA.getValVT(), Root, FIN, NULL, 0));
+ ArgValues.push_back(LowerMemArgument(Op, DAG, VA, MFI, Root, i));
}
}
if (!Subtarget->isTargetCygMing() && !Subtarget->isTargetWindows()) {
// Make sure the instruction takes 8n+4 bytes to make sure the start of the
- // arguments and the arguments after the retaddr has been pushed are aligned.
+ // arguments and the arguments after the retaddr has been pushed are
+ // aligned.
if ((StackSize & 7) == 0)
StackSize += 4;
}
unsigned Align = 1 << ((Flags & ISD::ParamFlags::ByValAlign) >>
ISD::ParamFlags::ByValAlignOffs);
- assert (Align >= 8);
unsigned Size = (Flags & ISD::ParamFlags::ByValSize) >>
ISD::ParamFlags::ByValSizeOffs;
SDOperand AlignNode = DAG.getConstant(Align, MVT::i32);
SDOperand SizeNode = DAG.getConstant(Size, MVT::i32);
+ SDOperand AlwaysInline = DAG.getConstant(1, MVT::i32);
- return DAG.getNode(ISD::MEMCPY, MVT::Other, Chain, PtrOff, Arg, SizeNode,
- AlignNode);
+ return DAG.getMemcpy(Chain, PtrOff, Arg, SizeNode, AlignNode,
+ AlwaysInline);
} else {
return DAG.getStore(Chain, Arg, PtrOff, NULL, 0);
}
if (!Subtarget->isTargetCygMing() && !Subtarget->isTargetWindows()) {
// Make sure the instruction takes 8n+4 bytes to make sure the start of the
- // arguments and the arguments after the retaddr has been pushed are aligned.
+ // arguments and the arguments after the retaddr has been pushed are
+ // aligned.
if ((NumBytes & 7) == 0)
NumBytes += 4;
}
assert(VA.isMemLoc());
if (StackPtr.Val == 0)
StackPtr = DAG.getRegister(getStackPtrReg(), getPointerTy());
- SDOperand PtrOff = DAG.getConstant(VA.getLocMemOffset(), getPointerTy());
- PtrOff = DAG.getNode(ISD::ADD, getPointerTy(), StackPtr, PtrOff);
- MemOpChains.push_back(DAG.getStore(Chain, Arg, PtrOff, NULL, 0));
+
+ MemOpChains.push_back(LowerMemOpCallTo(Op, DAG, StackPtr, VA, Chain,
+ Arg));
}
}
if (InFlag.Val)
Ops.push_back(InFlag);
- // FIXME: Do not generate X86ISD::TAILCALL for now.
- Chain = DAG.getNode(isTailCall ? X86ISD::TAILCALL : X86ISD::CALL,
+ assert(isTailCall==false && "no tail call here");
+ Chain = DAG.getNode(X86ISD::CALL,
NodeTys, &Ops[0], Ops.size());
InFlag = Chain.getValue(1);
return SDOperand(LowerCallResult(Chain, InFlag, Op.Val, CC, DAG), Op.ResNo);
}
+//===----------------------------------------------------------------------===//
+// Fast Calling Convention (tail call) implementation
+//===----------------------------------------------------------------------===//
+
+// Like std call, callee cleans arguments, convention except that ECX is
+// reserved for storing the tail called function address. Only 2 registers are
+// free for argument passing (inreg). Tail call optimization is performed
+// provided:
+// * tailcallopt is enabled
+// * caller/callee are fastcc
+// * elf/pic is disabled OR
+// * elf/pic enabled + callee is in module + callee has
+// visibility protected or hidden
+// To keep the stack aligned according to platform abi the function
+// GetAlignedArgumentStackSize ensures that argument delta is always multiples
+// of stack alignment. (Dynamic linkers need this - darwin's dyld for example)
+// If a tail called function callee has more arguments than the caller the
+// caller needs to make sure that there is room to move the RETADDR to. This is
+// achieved by reserving an area the size of the argument delta right after the
+// original REtADDR, but before the saved framepointer or the spilled registers
+// e.g. caller(arg1, arg2) calls callee(arg1, arg2,arg3,arg4)
+// stack layout:
+// arg1
+// arg2
+// RETADDR
+// [ new RETADDR
+// move area ]
+// (possible EBP)
+// ESI
+// EDI
+// local1 ..
+
+/// GetAlignedArgumentStackSize - Make the stack size align e.g 16n + 12 aligned
+/// for a 16 byte align requirement.
+unsigned X86TargetLowering::GetAlignedArgumentStackSize(unsigned StackSize,
+ SelectionDAG& DAG) {
+ if (PerformTailCallOpt) {
+ MachineFunction &MF = DAG.getMachineFunction();
+ const TargetMachine &TM = MF.getTarget();
+ const TargetFrameInfo &TFI = *TM.getFrameInfo();
+ unsigned StackAlignment = TFI.getStackAlignment();
+ uint64_t AlignMask = StackAlignment - 1;
+ int64_t Offset = StackSize;
+ unsigned SlotSize = Subtarget->is64Bit() ? 8 : 4;
+ if ( (Offset & AlignMask) <= (StackAlignment - SlotSize) ) {
+ // Number smaller than 12 so just add the difference.
+ Offset += ((StackAlignment - SlotSize) - (Offset & AlignMask));
+ } else {
+ // Mask out lower bits, add stackalignment once plus the 12 bytes.
+ Offset = ((~AlignMask) & Offset) + StackAlignment +
+ (StackAlignment-SlotSize);
+ }
+ StackSize = Offset;
+ }
+ return StackSize;
+}
+
+/// IsEligibleForTailCallElimination - Check to see whether the next instruction
+/// following the call is a return. A function is eligible if caller/callee
+/// calling conventions match, currently only fastcc supports tail calls, and
+/// the function CALL is immediatly followed by a RET.
+bool X86TargetLowering::IsEligibleForTailCallOptimization(SDOperand Call,
+ SDOperand Ret,
+ SelectionDAG& DAG) const {
+ if (!PerformTailCallOpt)
+ return false;
+
+ // Check whether CALL node immediatly preceeds the RET node and whether the
+ // return uses the result of the node or is a void return.
+ unsigned NumOps = Ret.getNumOperands();
+ if ((NumOps == 1 &&
+ (Ret.getOperand(0) == SDOperand(Call.Val,1) ||
+ Ret.getOperand(0) == SDOperand(Call.Val,0))) ||
+ (NumOps > 1 &&
+ Ret.getOperand(0) == SDOperand(Call.Val,Call.Val->getNumValues()-1) &&
+ Ret.getOperand(1) == SDOperand(Call.Val,0))) {
+ MachineFunction &MF = DAG.getMachineFunction();
+ unsigned CallerCC = MF.getFunction()->getCallingConv();
+ unsigned CalleeCC = cast<ConstantSDNode>(Call.getOperand(1))->getValue();
+ if (CalleeCC == CallingConv::Fast && CallerCC == CalleeCC) {
+ SDOperand Callee = Call.getOperand(4);
+ // On elf/pic %ebx needs to be livein.
+ if (getTargetMachine().getRelocationModel() != Reloc::PIC_ ||
+ !Subtarget->isPICStyleGOT())
+ return true;
+
+ // Can only do local tail calls with PIC.
+ GlobalValue * GV = 0;
+ GlobalAddressSDNode *G = dyn_cast<GlobalAddressSDNode>(Callee);
+ if(G != 0 &&
+ (GV = G->getGlobal()) &&
+ (GV->hasHiddenVisibility() || GV->hasProtectedVisibility()))
+ return true;
+ }
+ }
+
+ return false;
+}
+
+SDOperand X86TargetLowering::LowerX86_TailCallTo(SDOperand Op,
+ SelectionDAG &DAG,
+ unsigned CC) {
+ SDOperand Chain = Op.getOperand(0);
+ bool isVarArg = cast<ConstantSDNode>(Op.getOperand(2))->getValue() != 0;
+ bool isTailCall = cast<ConstantSDNode>(Op.getOperand(3))->getValue() != 0;
+ SDOperand Callee = Op.getOperand(4);
+ bool is64Bit = Subtarget->is64Bit();
+
+ assert(isTailCall && PerformTailCallOpt && "Should only emit tail calls.");
+
+ // Analyze operands of the call, assigning locations to each operand.
+ SmallVector<CCValAssign, 16> ArgLocs;
+ CCState CCInfo(CC, isVarArg, getTargetMachine(), ArgLocs);
+ if (is64Bit)
+ CCInfo.AnalyzeCallOperands(Op.Val, CC_X86_64_TailCall);
+ else
+ CCInfo.AnalyzeCallOperands(Op.Val, CC_X86_32_TailCall);
+
+
+ // Lower arguments at fp - stackoffset + fpdiff.
+ MachineFunction &MF = DAG.getMachineFunction();
+
+ unsigned NumBytesToBePushed =
+ GetAlignedArgumentStackSize(CCInfo.getNextStackOffset(), DAG);
+
+ unsigned NumBytesCallerPushed =
+ MF.getInfo<X86MachineFunctionInfo>()->getBytesToPopOnReturn();
+ int FPDiff = NumBytesCallerPushed - NumBytesToBePushed;
+
+ // Set the delta of movement of the returnaddr stackslot.
+ // But only set if delta is greater than previous delta.
+ if (FPDiff < (MF.getInfo<X86MachineFunctionInfo>()->getTCReturnAddrDelta()))
+ MF.getInfo<X86MachineFunctionInfo>()->setTCReturnAddrDelta(FPDiff);
+
+ Chain = DAG.
+ getCALLSEQ_START(Chain, DAG.getConstant(NumBytesToBePushed, getPointerTy()));
+
+ // Adjust the Return address stack slot.
+ SDOperand RetAddrFrIdx, NewRetAddrFrIdx;
+ if (FPDiff) {
+ MVT::ValueType VT = is64Bit ? MVT::i64 : MVT::i32;
+ RetAddrFrIdx = getReturnAddressFrameIndex(DAG);
+ // Load the "old" Return address.
+ RetAddrFrIdx =
+ DAG.getLoad(VT, Chain,RetAddrFrIdx, NULL, 0);
+ // Calculate the new stack slot for the return address.
+ int SlotSize = is64Bit ? 8 : 4;
+ int NewReturnAddrFI =
+ MF.getFrameInfo()->CreateFixedObject(SlotSize, FPDiff-SlotSize);
+ NewRetAddrFrIdx = DAG.getFrameIndex(NewReturnAddrFI, VT);
+ Chain = SDOperand(RetAddrFrIdx.Val, 1);
+ }
+
+ SmallVector<std::pair<unsigned, SDOperand>, 8> RegsToPass;
+ SmallVector<SDOperand, 8> MemOpChains;
+ SmallVector<SDOperand, 8> MemOpChains2;
+ SDOperand FramePtr, StackPtr;
+ SDOperand PtrOff;
+ SDOperand FIN;
+ int FI = 0;
+
+ // Walk the register/memloc assignments, inserting copies/loads. Lower
+ // arguments first to the stack slot where they would normally - in case of a
+ // normal function call - be.
+ for (unsigned i = 0, e = ArgLocs.size(); i != e; ++i) {
+ CCValAssign &VA = ArgLocs[i];
+ SDOperand Arg = Op.getOperand(5+2*VA.getValNo());
+
+ // Promote the value if needed.
+ switch (VA.getLocInfo()) {
+ default: assert(0 && "Unknown loc info!");
+ case CCValAssign::Full: break;
+ case CCValAssign::SExt:
+ Arg = DAG.getNode(ISD::SIGN_EXTEND, VA.getLocVT(), Arg);
+ break;
+ case CCValAssign::ZExt:
+ Arg = DAG.getNode(ISD::ZERO_EXTEND, VA.getLocVT(), Arg);
+ break;
+ case CCValAssign::AExt:
+ Arg = DAG.getNode(ISD::ANY_EXTEND, VA.getLocVT(), Arg);
+ break;
+ }
+
+ if (VA.isRegLoc()) {
+ RegsToPass.push_back(std::make_pair(VA.getLocReg(), Arg));
+ } else {
+ assert(VA.isMemLoc());
+ if (StackPtr.Val == 0)
+ StackPtr = DAG.getRegister(getStackPtrReg(), getPointerTy());
+
+ MemOpChains.push_back(LowerMemOpCallTo(Op, DAG, StackPtr, VA, Chain,
+ Arg));
+ }
+ }
+
+ if (!MemOpChains.empty())
+ Chain = DAG.getNode(ISD::TokenFactor, MVT::Other,
+ &MemOpChains[0], MemOpChains.size());
+
+ // Build a sequence of copy-to-reg nodes chained together with token chain
+ // and flag operands which copy the outgoing args into registers.
+ SDOperand InFlag;
+ for (unsigned i = 0, e = RegsToPass.size(); i != e; ++i) {
+ Chain = DAG.getCopyToReg(Chain, RegsToPass[i].first, RegsToPass[i].second,
+ InFlag);
+ InFlag = Chain.getValue(1);
+ }
+ InFlag = SDOperand();
+
+ // Copy from stack slots to stack slot of a tail called function. This needs
+ // to be done because if we would lower the arguments directly to their real
+ // stack slot we might end up overwriting each other.
+ // TODO: To make this more efficient (sometimes saving a store/load) we could
+ // analyse the arguments and emit this store/load/store sequence only for
+ // arguments which would be overwritten otherwise.
+ for (unsigned i = 0, e = ArgLocs.size(); i != e; ++i) {
+ CCValAssign &VA = ArgLocs[i];
+ if (!VA.isRegLoc()) {
+ SDOperand FlagsOp = Op.getOperand(6+2*VA.getValNo());
+ unsigned Flags = cast<ConstantSDNode>(FlagsOp)->getValue();
+
+ // Get source stack slot.
+ SDOperand PtrOff = DAG.getConstant(VA.getLocMemOffset(), getPointerTy());
+ PtrOff = DAG.getNode(ISD::ADD, getPointerTy(), StackPtr, PtrOff);
+ // Create frame index.
+ int32_t Offset = VA.getLocMemOffset()+FPDiff;
+ uint32_t OpSize = (MVT::getSizeInBits(VA.getLocVT())+7)/8;
+ FI = MF.getFrameInfo()->CreateFixedObject(OpSize, Offset);
+ FIN = DAG.getFrameIndex(FI, MVT::i32);
+ if (Flags & ISD::ParamFlags::ByVal) {
+ // Copy relative to framepointer.
+ unsigned Align = 1 << ((Flags & ISD::ParamFlags::ByValAlign) >>
+ ISD::ParamFlags::ByValAlignOffs);
+
+ unsigned Size = (Flags & ISD::ParamFlags::ByValSize) >>
+ ISD::ParamFlags::ByValSizeOffs;
+
+ SDOperand AlignNode = DAG.getConstant(Align, MVT::i32);
+ SDOperand SizeNode = DAG.getConstant(Size, MVT::i32);
+ SDOperand AlwaysInline = DAG.getConstant(1, MVT::i1);
+
+ MemOpChains2.push_back(DAG.getMemcpy(Chain, FIN, PtrOff, SizeNode,
+ AlignNode,AlwaysInline));
+ } else {
+ SDOperand LoadedArg = DAG.getLoad(VA.getValVT(), Chain, PtrOff, NULL,0);
+ // Store relative to framepointer.
+ MemOpChains2.push_back(DAG.getStore(Chain, LoadedArg, FIN, NULL, 0));
+ }
+ }
+ }
+
+ if (!MemOpChains2.empty())
+ Chain = DAG.getNode(ISD::TokenFactor, MVT::Other,
+ &MemOpChains2[0], MemOpChains.size());
+
+ // Store the return address to the appropriate stack slot.
+ if (FPDiff)
+ Chain = DAG.getStore(Chain,RetAddrFrIdx, NewRetAddrFrIdx, NULL, 0);
+
+ // ELF / PIC requires GOT in the EBX register before function calls via PLT
+ // GOT pointer.
+ // Does not work with tail call since ebx is not restored correctly by
+ // tailcaller. TODO: at least for x86 - verify for x86-64
+
+ // If the callee is a GlobalAddress node (quite common, every direct call is)
+ // turn it into a TargetGlobalAddress node so that legalize doesn't hack it.
+ if (GlobalAddressSDNode *G = dyn_cast<GlobalAddressSDNode>(Callee)) {
+ // We should use extra load for direct calls to dllimported functions in
+ // non-JIT mode.
+ if (!Subtarget->GVRequiresExtraLoad(G->getGlobal(),
+ getTargetMachine(), true))
+ Callee = DAG.getTargetGlobalAddress(G->getGlobal(), getPointerTy());
+ } else if (ExternalSymbolSDNode *S = dyn_cast<ExternalSymbolSDNode>(Callee))
+ Callee = DAG.getTargetExternalSymbol(S->getSymbol(), getPointerTy());
+ else {
+ assert(Callee.getOpcode() == ISD::LOAD &&
+ "Function destination must be loaded into virtual register");
+ unsigned Opc = is64Bit ? X86::R9 : X86::ECX;
+
+ Chain = DAG.getCopyToReg(Chain,
+ DAG.getRegister(Opc, getPointerTy()) ,
+ Callee,InFlag);
+ Callee = DAG.getRegister(Opc, getPointerTy());
+ // Add register as live out.
+ DAG.getMachineFunction().addLiveOut(Opc);
+ }
+
+ SDVTList NodeTys = DAG.getVTList(MVT::Other, MVT::Flag);
+ SmallVector<SDOperand, 8> Ops;
+
+ Ops.push_back(Chain);
+ Ops.push_back(DAG.getConstant(NumBytesToBePushed, getPointerTy()));
+ Ops.push_back(DAG.getConstant(0, getPointerTy()));
+ if (InFlag.Val)
+ Ops.push_back(InFlag);
+ Chain = DAG.getNode(ISD::CALLSEQ_END, NodeTys, &Ops[0], Ops.size());
+ InFlag = Chain.getValue(1);
+
+ // Returns a chain & a flag for retval copy to use.
+ NodeTys = DAG.getVTList(MVT::Other, MVT::Flag);
+ Ops.clear();
+ Ops.push_back(Chain);
+ Ops.push_back(Callee);
+ Ops.push_back(DAG.getConstant(FPDiff, MVT::i32));
+ // Add argument registers to the end of the list so that they are known live
+ // into the call.
+ for (unsigned i = 0, e = RegsToPass.size(); i != e; ++i)
+ Ops.push_back(DAG.getRegister(RegsToPass[i].first,
+ RegsToPass[i].second.getValueType()));
+ if (InFlag.Val)
+ Ops.push_back(InFlag);
+ assert(InFlag.Val &&
+ "Flag must be set. Depend on flag being set in LowerRET");
+ Chain = DAG.getNode(X86ISD::TAILCALL,
+ Op.Val->getVTList(), &Ops[0], Ops.size());
+
+ return SDOperand(Chain.Val, Op.ResNo);
+}
//===----------------------------------------------------------------------===//
// X86-64 C Calling Convention implementation
MachineFrameInfo *MFI = MF.getFrameInfo();
SDOperand Root = Op.getOperand(0);
bool isVarArg = cast<ConstantSDNode>(Op.getOperand(2))->getValue() != 0;
+ unsigned CC= MF.getFunction()->getCallingConv();
static const unsigned GPR64ArgRegs[] = {
X86::RDI, X86::RSI, X86::RDX, X86::RCX, X86::R8, X86::R9
// Assign locations to all of the incoming arguments.
SmallVector<CCValAssign, 16> ArgLocs;
- CCState CCInfo(MF.getFunction()->getCallingConv(), isVarArg,
+ CCState CCInfo(CC, isVarArg,
getTargetMachine(), ArgLocs);
- CCInfo.AnalyzeFormalArguments(Op.Val, CC_X86_64_C);
+ if (CC == CallingConv::Fast && PerformTailCallOpt)
+ CCInfo.AnalyzeFormalArguments(Op.Val, CC_X86_64_TailCall);
+ else
+ CCInfo.AnalyzeFormalArguments(Op.Val, CC_X86_64_C);
SmallVector<SDOperand, 8> ArgValues;
unsigned LastVal = ~0U;
}
unsigned StackSize = CCInfo.getNextStackOffset();
+ if (CC==CallingConv::Fast)
+ StackSize =GetAlignedArgumentStackSize(StackSize, DAG);
// If the function takes variable number of arguments, make a frame index for
// the start of the first vararg value... for expansion of llvm.va_start.
if (isVarArg) {
+ assert(CC!=CallingConv::Fast
+ && "Var arg not supported with calling convention fastcc");
unsigned NumIntRegs = CCInfo.getFirstUnallocated(GPR64ArgRegs, 6);
unsigned NumXMMRegs = CCInfo.getFirstUnallocated(XMMArgRegs, 8);
}
ArgValues.push_back(Root);
-
- BytesToPopOnReturn = 0; // Callee pops nothing.
- BytesCallerReserves = StackSize;
-
+ // Tail call convention (fastcc) needs callee pop.
+ if (CC == CallingConv::Fast && PerformTailCallOpt) {
+ BytesToPopOnReturn = StackSize; // Callee pops everything.
+ BytesCallerReserves = 0;
+ } else {
+ BytesToPopOnReturn = 0; // Callee pops nothing.
+ BytesCallerReserves = StackSize;
+ }
X86MachineFunctionInfo *FuncInfo = MF.getInfo<X86MachineFunctionInfo>();
FuncInfo->setBytesToPopOnReturn(BytesToPopOnReturn);
unsigned CC) {
SDOperand Chain = Op.getOperand(0);
bool isVarArg = cast<ConstantSDNode>(Op.getOperand(2))->getValue() != 0;
- bool isTailCall = cast<ConstantSDNode>(Op.getOperand(3))->getValue() != 0;
SDOperand Callee = Op.getOperand(4);
// Analyze operands of the call, assigning locations to each operand.
SmallVector<CCValAssign, 16> ArgLocs;
CCState CCInfo(CC, isVarArg, getTargetMachine(), ArgLocs);
- CCInfo.AnalyzeCallOperands(Op.Val, CC_X86_64_C);
+ if (CC==CallingConv::Fast && PerformTailCallOpt)
+ CCInfo.AnalyzeCallOperands(Op.Val, CC_X86_64_TailCall);
+ else
+ CCInfo.AnalyzeCallOperands(Op.Val, CC_X86_64_C);
// Get a count of how many bytes are to be pushed on the stack.
unsigned NumBytes = CCInfo.getNextStackOffset();
+ if (CC == CallingConv::Fast)
+ NumBytes = GetAlignedArgumentStackSize(NumBytes,DAG);
+
Chain = DAG.getCALLSEQ_START(Chain,DAG.getConstant(NumBytes, getPointerTy()));
SmallVector<std::pair<unsigned, SDOperand>, 8> RegsToPass;
}
if (isVarArg) {
+ assert ( CallingConv::Fast != CC &&
+ "Var args not supported with calling convention fastcc");
+
// From AMD64 ABI document:
// For calls that may call functions that use varargs or stdargs
// (prototype-less calls or calls to functions containing ellipsis (...) in
if (InFlag.Val)
Ops.push_back(InFlag);
- // FIXME: Do not generate X86ISD::TAILCALL for now.
- Chain = DAG.getNode(isTailCall ? X86ISD::TAILCALL : X86ISD::CALL,
+ Chain = DAG.getNode(X86ISD::CALL,
NodeTys, &Ops[0], Ops.size());
InFlag = Chain.getValue(1);
-
+ int NumBytesForCalleeToPush = 0;
+ if (CC==CallingConv::Fast && PerformTailCallOpt) {
+ NumBytesForCalleeToPush = NumBytes; // Callee pops everything
+ } else {
+ NumBytesForCalleeToPush = 0; // Callee pops nothing.
+ }
// Returns a flag for retval copy to use.
NodeTys = DAG.getVTList(MVT::Other, MVT::Flag);
Ops.clear();
Ops.push_back(Chain);
Ops.push_back(DAG.getConstant(NumBytes, getPointerTy()));
- Ops.push_back(DAG.getConstant(0, getPointerTy()));
+ Ops.push_back(DAG.getConstant(NumBytesForCalleeToPush, getPointerTy()));
Ops.push_back(InFlag);
Chain = DAG.getNode(ISD::CALLSEQ_END, NodeTys, &Ops[0], Ops.size());
InFlag = Chain.getValue(1);
// SHUFPS the element to the lowest double word, then movss.
MVT::ValueType MaskVT = MVT::getIntVectorWithNumElements(4);
SmallVector<SDOperand, 8> IdxVec;
- IdxVec.push_back(DAG.getConstant(Idx, MVT::getVectorElementType(MaskVT)));
- IdxVec.push_back(DAG.getNode(ISD::UNDEF, MVT::getVectorElementType(MaskVT)));
- IdxVec.push_back(DAG.getNode(ISD::UNDEF, MVT::getVectorElementType(MaskVT)));
- IdxVec.push_back(DAG.getNode(ISD::UNDEF, MVT::getVectorElementType(MaskVT)));
+ IdxVec.
+ push_back(DAG.getConstant(Idx, MVT::getVectorElementType(MaskVT)));
+ IdxVec.
+ push_back(DAG.getNode(ISD::UNDEF, MVT::getVectorElementType(MaskVT)));
+ IdxVec.
+ push_back(DAG.getNode(ISD::UNDEF, MVT::getVectorElementType(MaskVT)));
+ IdxVec.
+ push_back(DAG.getNode(ISD::UNDEF, MVT::getVectorElementType(MaskVT)));
SDOperand Mask = DAG.getNode(ISD::BUILD_VECTOR, MaskVT,
&IdxVec[0], IdxVec.size());
Vec = DAG.getNode(ISD::VECTOR_SHUFFLE, Vec.getValueType(),
MVT::ValueType MaskVT = MVT::getIntVectorWithNumElements(4);
SmallVector<SDOperand, 8> IdxVec;
IdxVec.push_back(DAG.getConstant(1, MVT::getVectorElementType(MaskVT)));
- IdxVec.push_back(DAG.getNode(ISD::UNDEF, MVT::getVectorElementType(MaskVT)));
+ IdxVec.
+ push_back(DAG.getNode(ISD::UNDEF, MVT::getVectorElementType(MaskVT)));
SDOperand Mask = DAG.getNode(ISD::BUILD_VECTOR, MaskVT,
&IdxVec[0], IdxVec.size());
Vec = DAG.getNode(ISD::VECTOR_SHUFFLE, Vec.getValueType(),
return Result;
}
+/// LowerShift - Lower SRA_PARTS and friends, which return two i32 values and
+/// take a 2 x i32 value to shift plus a shift amount.
SDOperand X86TargetLowering::LowerShift(SDOperand Op, SelectionDAG &DAG) {
- assert(Op.getNumOperands() == 3 && Op.getValueType() == MVT::i32 &&
- "Not an i64 shift!");
- bool isSRA = Op.getOpcode() == ISD::SRA_PARTS;
- SDOperand ShOpLo = Op.getOperand(0);
- SDOperand ShOpHi = Op.getOperand(1);
- SDOperand ShAmt = Op.getOperand(2);
- SDOperand Tmp1 = isSRA ?
- DAG.getNode(ISD::SRA, MVT::i32, ShOpHi, DAG.getConstant(31, MVT::i8)) :
- DAG.getConstant(0, MVT::i32);
-
- SDOperand Tmp2, Tmp3;
- if (Op.getOpcode() == ISD::SHL_PARTS) {
- Tmp2 = DAG.getNode(X86ISD::SHLD, MVT::i32, ShOpHi, ShOpLo, ShAmt);
- Tmp3 = DAG.getNode(ISD::SHL, MVT::i32, ShOpLo, ShAmt);
- } else {
- Tmp2 = DAG.getNode(X86ISD::SHRD, MVT::i32, ShOpLo, ShOpHi, ShAmt);
- Tmp3 = DAG.getNode(isSRA ? ISD::SRA : ISD::SRL, MVT::i32, ShOpHi, ShAmt);
- }
+ assert(Op.getNumOperands() == 3 && Op.getValueType() == MVT::i32 &&
+ "Not an i64 shift!");
+ bool isSRA = Op.getOpcode() == ISD::SRA_PARTS;
+ SDOperand ShOpLo = Op.getOperand(0);
+ SDOperand ShOpHi = Op.getOperand(1);
+ SDOperand ShAmt = Op.getOperand(2);
+ SDOperand Tmp1 = isSRA ?
+ DAG.getNode(ISD::SRA, MVT::i32, ShOpHi, DAG.getConstant(31, MVT::i8)) :
+ DAG.getConstant(0, MVT::i32);
+
+ SDOperand Tmp2, Tmp3;
+ if (Op.getOpcode() == ISD::SHL_PARTS) {
+ Tmp2 = DAG.getNode(X86ISD::SHLD, MVT::i32, ShOpHi, ShOpLo, ShAmt);
+ Tmp3 = DAG.getNode(ISD::SHL, MVT::i32, ShOpLo, ShAmt);
+ } else {
+ Tmp2 = DAG.getNode(X86ISD::SHRD, MVT::i32, ShOpLo, ShOpHi, ShAmt);
+ Tmp3 = DAG.getNode(isSRA ? ISD::SRA : ISD::SRL, MVT::i32, ShOpHi, ShAmt);
+ }
- const MVT::ValueType *VTs = DAG.getNodeValueTypes(MVT::Other, MVT::Flag);
- SDOperand AndNode = DAG.getNode(ISD::AND, MVT::i8, ShAmt,
- DAG.getConstant(32, MVT::i8));
- SDOperand COps[]={DAG.getEntryNode(), AndNode, DAG.getConstant(0, MVT::i8)};
- SDOperand InFlag = DAG.getNode(X86ISD::CMP, VTs, 2, COps, 3).getValue(1);
-
- SDOperand Hi, Lo;
- SDOperand CC = DAG.getConstant(X86::COND_NE, MVT::i8);
-
- VTs = DAG.getNodeValueTypes(MVT::i32, MVT::Flag);
- SmallVector<SDOperand, 4> Ops;
- if (Op.getOpcode() == ISD::SHL_PARTS) {
- Ops.push_back(Tmp2);
- Ops.push_back(Tmp3);
- Ops.push_back(CC);
- Ops.push_back(InFlag);
- Hi = DAG.getNode(X86ISD::CMOV, VTs, 2, &Ops[0], Ops.size());
- InFlag = Hi.getValue(1);
-
- Ops.clear();
- Ops.push_back(Tmp3);
- Ops.push_back(Tmp1);
- Ops.push_back(CC);
- Ops.push_back(InFlag);
- Lo = DAG.getNode(X86ISD::CMOV, VTs, 2, &Ops[0], Ops.size());
- } else {
- Ops.push_back(Tmp2);
- Ops.push_back(Tmp3);
- Ops.push_back(CC);
- Ops.push_back(InFlag);
- Lo = DAG.getNode(X86ISD::CMOV, VTs, 2, &Ops[0], Ops.size());
- InFlag = Lo.getValue(1);
-
- Ops.clear();
- Ops.push_back(Tmp3);
- Ops.push_back(Tmp1);
- Ops.push_back(CC);
- Ops.push_back(InFlag);
- Hi = DAG.getNode(X86ISD::CMOV, VTs, 2, &Ops[0], Ops.size());
- }
+ const MVT::ValueType *VTs = DAG.getNodeValueTypes(MVT::Other, MVT::Flag);
+ SDOperand AndNode = DAG.getNode(ISD::AND, MVT::i8, ShAmt,
+ DAG.getConstant(32, MVT::i8));
+ SDOperand Cond = DAG.getNode(X86ISD::CMP, MVT::i32,
+ AndNode, DAG.getConstant(0, MVT::i8));
+
+ SDOperand Hi, Lo;
+ SDOperand CC = DAG.getConstant(X86::COND_NE, MVT::i8);
+ VTs = DAG.getNodeValueTypes(MVT::i32, MVT::Flag);
+ SmallVector<SDOperand, 4> Ops;
+ if (Op.getOpcode() == ISD::SHL_PARTS) {
+ Ops.push_back(Tmp2);
+ Ops.push_back(Tmp3);
+ Ops.push_back(CC);
+ Ops.push_back(Cond);
+ Hi = DAG.getNode(X86ISD::CMOV, MVT::i32, &Ops[0], Ops.size());
+
+ Ops.clear();
+ Ops.push_back(Tmp3);
+ Ops.push_back(Tmp1);
+ Ops.push_back(CC);
+ Ops.push_back(Cond);
+ Lo = DAG.getNode(X86ISD::CMOV, MVT::i32, &Ops[0], Ops.size());
+ } else {
+ Ops.push_back(Tmp2);
+ Ops.push_back(Tmp3);
+ Ops.push_back(CC);
+ Ops.push_back(Cond);
+ Lo = DAG.getNode(X86ISD::CMOV, MVT::i32, &Ops[0], Ops.size());
- VTs = DAG.getNodeValueTypes(MVT::i32, MVT::i32);
Ops.clear();
- Ops.push_back(Lo);
- Ops.push_back(Hi);
- return DAG.getNode(ISD::MERGE_VALUES, VTs, 2, &Ops[0], Ops.size());
+ Ops.push_back(Tmp3);
+ Ops.push_back(Tmp1);
+ Ops.push_back(CC);
+ Ops.push_back(Cond);
+ Hi = DAG.getNode(X86ISD::CMOV, MVT::i32, &Ops[0], Ops.size());
+ }
+
+ VTs = DAG.getNodeValueTypes(MVT::i32, MVT::i32);
+ Ops.clear();
+ Ops.push_back(Lo);
+ Ops.push_back(Hi);
+ return DAG.getNode(ISD::MERGE_VALUES, VTs, 2, &Ops[0], Ops.size());
}
SDOperand X86TargetLowering::LowerSINT_TO_FP(SDOperand Op, SelectionDAG &DAG) {
StackSlot, NULL, 0);
// These are really Legal; caller falls through into that case.
- if (SrcVT==MVT::i32 && Op.getValueType() != MVT::f80 && X86ScalarSSE)
+ if (SrcVT==MVT::i32 && Op.getValueType() == MVT::f32 && X86ScalarSSEf32)
+ return Result;
+ if (SrcVT==MVT::i32 && Op.getValueType() == MVT::f64 && X86ScalarSSEf64)
+ return Result;
+ if (SrcVT==MVT::i64 && Op.getValueType() != MVT::f80 &&
+ Subtarget->is64Bit())
return Result;
// Build the FILD
SDVTList Tys;
- bool useSSE = X86ScalarSSE && Op.getValueType() != MVT::f80;
+ bool useSSE = (X86ScalarSSEf32 && Op.getValueType() == MVT::f32) ||
+ (X86ScalarSSEf64 && Op.getValueType() == MVT::f64);
if (useSSE)
Tys = DAG.getVTList(MVT::f64, MVT::Other, MVT::Flag);
else
return Result;
}
-SDOperand X86TargetLowering::LowerFP_TO_SINT(SDOperand Op, SelectionDAG &DAG) {
+std::pair<SDOperand,SDOperand> X86TargetLowering::
+FP_TO_SINTHelper(SDOperand Op, SelectionDAG &DAG) {
assert(Op.getValueType() <= MVT::i64 && Op.getValueType() >= MVT::i16 &&
"Unknown FP_TO_SINT to lower!");
+
+ // These are really Legal.
+ if (Op.getValueType() == MVT::i32 &&
+ X86ScalarSSEf32 && Op.getOperand(0).getValueType() == MVT::f32)
+ return std::make_pair(SDOperand(), SDOperand());
+ if (Op.getValueType() == MVT::i32 &&
+ X86ScalarSSEf64 && Op.getOperand(0).getValueType() == MVT::f64)
+ return std::make_pair(SDOperand(), SDOperand());
+ if (Subtarget->is64Bit() &&
+ Op.getValueType() == MVT::i64 &&
+ Op.getOperand(0).getValueType() != MVT::f80)
+ return std::make_pair(SDOperand(), SDOperand());
+
// We lower FP->sint64 into FISTP64, followed by a load, all to a temporary
// stack slot.
- SDOperand Result;
MachineFunction &MF = DAG.getMachineFunction();
unsigned MemSize = MVT::getSizeInBits(Op.getValueType())/8;
int SSFI = MF.getFrameInfo()->CreateStackObject(MemSize, MemSize);
SDOperand StackSlot = DAG.getFrameIndex(SSFI, getPointerTy());
-
- // These are really Legal.
- if (Op.getValueType() == MVT::i32 && X86ScalarSSE &&
- Op.getOperand(0).getValueType() != MVT::f80)
- return Result;
-
unsigned Opc;
switch (Op.getValueType()) {
- default: assert(0 && "Invalid FP_TO_SINT to lower!");
- case MVT::i16: Opc = X86ISD::FP_TO_INT16_IN_MEM; break;
- case MVT::i32: Opc = X86ISD::FP_TO_INT32_IN_MEM; break;
- case MVT::i64: Opc = X86ISD::FP_TO_INT64_IN_MEM; break;
+ default: assert(0 && "Invalid FP_TO_SINT to lower!");
+ case MVT::i16: Opc = X86ISD::FP_TO_INT16_IN_MEM; break;
+ case MVT::i32: Opc = X86ISD::FP_TO_INT32_IN_MEM; break;
+ case MVT::i64: Opc = X86ISD::FP_TO_INT64_IN_MEM; break;
}
SDOperand Chain = DAG.getEntryNode();
SDOperand Value = Op.getOperand(0);
- if (X86ScalarSSE && Op.getOperand(0).getValueType() != MVT::f80) {
+ if ((X86ScalarSSEf32 && Op.getOperand(0).getValueType() == MVT::f32) ||
+ (X86ScalarSSEf64 && Op.getOperand(0).getValueType() == MVT::f64)) {
assert(Op.getValueType() == MVT::i64 && "Invalid FP_TO_SINT to lower!");
Chain = DAG.getStore(Chain, Value, StackSlot, NULL, 0);
SDVTList Tys = DAG.getVTList(Op.getOperand(0).getValueType(), MVT::Other);
SDOperand Ops[] = { Chain, Value, StackSlot };
SDOperand FIST = DAG.getNode(Opc, MVT::Other, Ops, 3);
+ return std::make_pair(FIST, StackSlot);
+}
+
+SDOperand X86TargetLowering::LowerFP_TO_SINT(SDOperand Op, SelectionDAG &DAG) {
+ assert((Op.getValueType() != MVT::i64 || Subtarget->is64Bit()) &&
+ "This FP_TO_SINT must be expanded!");
+
+ std::pair<SDOperand,SDOperand> Vals = FP_TO_SINTHelper(Op, DAG);
+ SDOperand FIST = Vals.first, StackSlot = Vals.second;
+ if (FIST.Val == 0) return SDOperand();
+
// Load the result.
return DAG.getLoad(Op.getValueType(), FIST, StackSlot, NULL, 0);
}
+SDNode *X86TargetLowering::ExpandFP_TO_SINT(SDNode *N, SelectionDAG &DAG) {
+ std::pair<SDOperand,SDOperand> Vals = FP_TO_SINTHelper(SDOperand(N, 0), DAG);
+ SDOperand FIST = Vals.first, StackSlot = Vals.second;
+ if (FIST.Val == 0) return 0;
+
+ // Return an i64 load from the stack slot.
+ SDOperand Res = DAG.getLoad(MVT::i64, FIST, StackSlot, NULL, 0);
+
+ // Use a MERGE_VALUES node to drop the chain result value.
+ return DAG.getNode(ISD::MERGE_VALUES, MVT::i64, Res).Val;
+}
+
SDOperand X86TargetLowering::LowerFABS(SDOperand Op, SelectionDAG &DAG) {
MVT::ValueType VT = Op.getValueType();
MVT::ValueType EltVT = VT;
SrcVT = VT;
SrcTy = MVT::getTypeForValueType(SrcVT);
}
+ // And if it is bigger, shrink it first.
+ if (MVT::getSizeInBits(SrcVT) > MVT::getSizeInBits(VT)) {
+ Op1 = DAG.getNode(ISD::FP_ROUND, VT, Op1);
+ SrcVT = VT;
+ SrcTy = MVT::getTypeForValueType(SrcVT);
+ }
+
+ // At this point the operands and the result should have the same
+ // type, and that won't be f80 since that is not custom lowered.
// First get the sign bit of second operand.
std::vector<Constant*> CV;
return DAG.getNode(X86ISD::FOR, VT, Val, SignBit);
}
-SDOperand X86TargetLowering::LowerSETCC(SDOperand Op, SelectionDAG &DAG,
- SDOperand Chain) {
+SDOperand X86TargetLowering::LowerSETCC(SDOperand Op, SelectionDAG &DAG) {
assert(Op.getValueType() == MVT::i8 && "SetCC type must be 8-bit integer");
SDOperand Cond;
SDOperand Op0 = Op.getOperand(0);
SDOperand Op1 = Op.getOperand(1);
SDOperand CC = Op.getOperand(2);
ISD::CondCode SetCCOpcode = cast<CondCodeSDNode>(CC)->get();
- const MVT::ValueType *VTs1 = DAG.getNodeValueTypes(MVT::Other, MVT::Flag);
- const MVT::ValueType *VTs2 = DAG.getNodeValueTypes(MVT::i8, MVT::Flag);
bool isFP = MVT::isFloatingPoint(Op.getOperand(1).getValueType());
unsigned X86CC;
if (translateX86CC(cast<CondCodeSDNode>(CC)->get(), isFP, X86CC,
Op0, Op1, DAG)) {
- SDOperand Ops1[] = { Chain, Op0, Op1 };
- Cond = DAG.getNode(X86ISD::CMP, VTs1, 2, Ops1, 3).getValue(1);
- SDOperand Ops2[] = { DAG.getConstant(X86CC, MVT::i8), Cond };
- return DAG.getNode(X86ISD::SETCC, VTs2, 2, Ops2, 2);
+ Cond = DAG.getNode(X86ISD::CMP, MVT::i32, Op0, Op1);
+ return DAG.getNode(X86ISD::SETCC, MVT::i8,
+ DAG.getConstant(X86CC, MVT::i8), Cond);
}
assert(isFP && "Illegal integer SetCC!");
- SDOperand COps[] = { Chain, Op0, Op1 };
- Cond = DAG.getNode(X86ISD::CMP, VTs1, 2, COps, 3).getValue(1);
-
+ Cond = DAG.getNode(X86ISD::CMP, MVT::i32, Op0, Op1);
switch (SetCCOpcode) {
default: assert(false && "Illegal floating point SetCC!");
case ISD::SETOEQ: { // !PF & ZF
- SDOperand Ops1[] = { DAG.getConstant(X86::COND_NP, MVT::i8), Cond };
- SDOperand Tmp1 = DAG.getNode(X86ISD::SETCC, VTs2, 2, Ops1, 2);
- SDOperand Ops2[] = { DAG.getConstant(X86::COND_E, MVT::i8),
- Tmp1.getValue(1) };
- SDOperand Tmp2 = DAG.getNode(X86ISD::SETCC, VTs2, 2, Ops2, 2);
+ SDOperand Tmp1 = DAG.getNode(X86ISD::SETCC, MVT::i8,
+ DAG.getConstant(X86::COND_NP, MVT::i8), Cond);
+ SDOperand Tmp2 = DAG.getNode(X86ISD::SETCC, MVT::i8,
+ DAG.getConstant(X86::COND_E, MVT::i8), Cond);
return DAG.getNode(ISD::AND, MVT::i8, Tmp1, Tmp2);
}
case ISD::SETUNE: { // PF | !ZF
- SDOperand Ops1[] = { DAG.getConstant(X86::COND_P, MVT::i8), Cond };
- SDOperand Tmp1 = DAG.getNode(X86ISD::SETCC, VTs2, 2, Ops1, 2);
- SDOperand Ops2[] = { DAG.getConstant(X86::COND_NE, MVT::i8),
- Tmp1.getValue(1) };
- SDOperand Tmp2 = DAG.getNode(X86ISD::SETCC, VTs2, 2, Ops2, 2);
+ SDOperand Tmp1 = DAG.getNode(X86ISD::SETCC, MVT::i8,
+ DAG.getConstant(X86::COND_P, MVT::i8), Cond);
+ SDOperand Tmp2 = DAG.getNode(X86ISD::SETCC, MVT::i8,
+ DAG.getConstant(X86::COND_NE, MVT::i8), Cond);
return DAG.getNode(ISD::OR, MVT::i8, Tmp1, Tmp2);
}
}
}
+
SDOperand X86TargetLowering::LowerSELECT(SDOperand Op, SelectionDAG &DAG) {
bool addTest = true;
- SDOperand Chain = DAG.getEntryNode();
SDOperand Cond = Op.getOperand(0);
SDOperand CC;
- const MVT::ValueType *VTs = DAG.getNodeValueTypes(MVT::Other, MVT::Flag);
if (Cond.getOpcode() == ISD::SETCC)
- Cond = LowerSETCC(Cond, DAG, Chain);
+ Cond = LowerSETCC(Cond, DAG);
+ // If condition flag is set by a X86ISD::CMP, then use it as the condition
+ // setting operand in place of the X86ISD::SETCC.
if (Cond.getOpcode() == X86ISD::SETCC) {
CC = Cond.getOperand(0);
- // If condition flag is set by a X86ISD::CMP, then make a copy of it
- // (since flag operand cannot be shared). Use it as the condition setting
- // operand in place of the X86ISD::SETCC.
- // If the X86ISD::SETCC has more than one use, then perhaps it's better
- // to use a test instead of duplicating the X86ISD::CMP (for register
- // pressure reason)?
SDOperand Cmp = Cond.getOperand(1);
unsigned Opc = Cmp.getOpcode();
- bool IllegalFPCMov = !X86ScalarSSE &&
- MVT::isFloatingPoint(Op.getValueType()) &&
- !hasFPCMov(cast<ConstantSDNode>(CC)->getSignExtended());
- if ((Opc == X86ISD::CMP || Opc == X86ISD::COMI || Opc == X86ISD::UCOMI) &&
- !IllegalFPCMov) {
- SDOperand Ops[] = { Chain, Cmp.getOperand(1), Cmp.getOperand(2) };
- Cond = DAG.getNode(Opc, VTs, 2, Ops, 3);
+ MVT::ValueType VT = Op.getValueType();
+ bool IllegalFPCMov = false;
+ if (VT == MVT::f32 && !X86ScalarSSEf32)
+ IllegalFPCMov = !hasFPCMov(cast<ConstantSDNode>(CC)->getSignExtended());
+ else if (VT == MVT::f64 && !X86ScalarSSEf64)
+ IllegalFPCMov = !hasFPCMov(cast<ConstantSDNode>(CC)->getSignExtended());
+ else if (VT == MVT::f80)
+ IllegalFPCMov = !hasFPCMov(cast<ConstantSDNode>(CC)->getSignExtended());
+ if ((Opc == X86ISD::CMP ||
+ Opc == X86ISD::COMI ||
+ Opc == X86ISD::UCOMI) && !IllegalFPCMov) {
+ Cond = Cmp;
addTest = false;
}
}
if (addTest) {
CC = DAG.getConstant(X86::COND_NE, MVT::i8);
- SDOperand Ops[] = { Chain, Cond, DAG.getConstant(0, MVT::i8) };
- Cond = DAG.getNode(X86ISD::CMP, VTs, 2, Ops, 3);
+ Cond= DAG.getNode(X86ISD::CMP, MVT::i32, Cond, DAG.getConstant(0, MVT::i8));
}
- VTs = DAG.getNodeValueTypes(Op.getValueType(), MVT::Flag);
+ const MVT::ValueType *VTs = DAG.getNodeValueTypes(Op.getValueType(),
+ MVT::Flag);
SmallVector<SDOperand, 4> Ops;
// X86ISD::CMOV means set the result (which is operand 1) to the RHS if
// condition is true.
Ops.push_back(Op.getOperand(2));
Ops.push_back(Op.getOperand(1));
Ops.push_back(CC);
- Ops.push_back(Cond.getValue(1));
+ Ops.push_back(Cond);
return DAG.getNode(X86ISD::CMOV, VTs, 2, &Ops[0], Ops.size());
}
SDOperand Cond = Op.getOperand(1);
SDOperand Dest = Op.getOperand(2);
SDOperand CC;
- const MVT::ValueType *VTs = DAG.getNodeValueTypes(MVT::Other, MVT::Flag);
if (Cond.getOpcode() == ISD::SETCC)
- Cond = LowerSETCC(Cond, DAG, Chain);
+ Cond = LowerSETCC(Cond, DAG);
+ // If condition flag is set by a X86ISD::CMP, then use it as the condition
+ // setting operand in place of the X86ISD::SETCC.
if (Cond.getOpcode() == X86ISD::SETCC) {
CC = Cond.getOperand(0);
- // If condition flag is set by a X86ISD::CMP, then make a copy of it
- // (since flag operand cannot be shared). Use it as the condition setting
- // operand in place of the X86ISD::SETCC.
- // If the X86ISD::SETCC has more than one use, then perhaps it's better
- // to use a test instead of duplicating the X86ISD::CMP (for register
- // pressure reason)?
SDOperand Cmp = Cond.getOperand(1);
unsigned Opc = Cmp.getOpcode();
- if (Opc == X86ISD::CMP || Opc == X86ISD::COMI || Opc == X86ISD::UCOMI) {
- SDOperand Ops[] = { Chain, Cmp.getOperand(1), Cmp.getOperand(2) };
- Cond = DAG.getNode(Opc, VTs, 2, Ops, 3);
+ if (Opc == X86ISD::CMP ||
+ Opc == X86ISD::COMI ||
+ Opc == X86ISD::UCOMI) {
+ Cond = Cmp;
addTest = false;
}
}
if (addTest) {
CC = DAG.getConstant(X86::COND_NE, MVT::i8);
- SDOperand Ops[] = { Chain, Cond, DAG.getConstant(0, MVT::i8) };
- Cond = DAG.getNode(X86ISD::CMP, VTs, 2, Ops, 3);
+ Cond= DAG.getNode(X86ISD::CMP, MVT::i32, Cond, DAG.getConstant(0, MVT::i8));
}
return DAG.getNode(X86ISD::BRCOND, Op.getValueType(),
- Cond, Op.getOperand(2), CC, Cond.getValue(1));
+ Chain, Op.getOperand(2), CC, Cond);
}
SDOperand X86TargetLowering::LowerCALL(SDOperand Op, SelectionDAG &DAG) {
- unsigned CallingConv= cast<ConstantSDNode>(Op.getOperand(1))->getValue();
-
- if (Subtarget->is64Bit())
- return LowerX86_64CCCCallTo(Op, DAG, CallingConv);
+ unsigned CallingConv = cast<ConstantSDNode>(Op.getOperand(1))->getValue();
+ bool isTailCall = cast<ConstantSDNode>(Op.getOperand(3))->getValue() != 0;
+
+ if (Subtarget->is64Bit())
+ if(CallingConv==CallingConv::Fast && isTailCall && PerformTailCallOpt)
+ return LowerX86_TailCallTo(Op, DAG, CallingConv);
+ else
+ return LowerX86_64CCCCallTo(Op, DAG, CallingConv);
else
switch (CallingConv) {
default:
assert(0 && "Unsupported calling convention");
case CallingConv::Fast:
- // TODO: Implement fastcc
- // Falls through
+ if (isTailCall && PerformTailCallOpt)
+ return LowerX86_TailCallTo(Op, DAG, CallingConv);
+ else
+ return LowerCCCCallTo(Op,DAG, CallingConv);
case CallingConv::C:
case CallingConv::X86_StdCall:
return LowerCCCCallTo(Op, DAG, CallingConv);
default:
assert(0 && "Unsupported calling convention");
case CallingConv::Fast:
- // TODO: implement fastcc.
-
+ return LowerCCCArguments(Op,DAG, true);
// Falls through
case CallingConv::C:
return LowerCCCArguments(Op, DAG);
// The libc version is likely to be faster for these cases. It can use the
// address value and run time information about the CPU.
if ((Align & 3) != 0 ||
- (I && I->getValue() > Subtarget->getMinRepStrSizeThreshold())) {
+ (I && I->getValue() > Subtarget->getMaxInlineSizeThreshold())) {
MVT::ValueType IntPtr = getPointerTy();
const Type *IntPtrTy = getTargetData()->getIntPtrType();
TargetLowering::ArgListTy Args;
return Chain;
}
-SDOperand X86TargetLowering::LowerMEMCPY(SDOperand Op, SelectionDAG &DAG) {
- SDOperand Chain = Op.getOperand(0);
- unsigned Align =
- (unsigned)cast<ConstantSDNode>(Op.getOperand(4))->getValue();
- if (Align == 0) Align = 1;
-
- ConstantSDNode *I = dyn_cast<ConstantSDNode>(Op.getOperand(3));
- // If not DWORD aligned or size is more than the threshold, call memcpy.
- // The libc version is likely to be faster for these cases. It can use the
- // address value and run time information about the CPU.
- // With glibc 2.6.1 on a core 2, coping an array of 100M longs was 30% faster
- if ((Align & 3) != 0 ||
- (I && I->getValue() > Subtarget->getMinRepStrSizeThreshold())) {
- MVT::ValueType IntPtr = getPointerTy();
- TargetLowering::ArgListTy Args;
- TargetLowering::ArgListEntry Entry;
- Entry.Ty = getTargetData()->getIntPtrType();
- Entry.Node = Op.getOperand(1); Args.push_back(Entry);
- Entry.Node = Op.getOperand(2); Args.push_back(Entry);
- Entry.Node = Op.getOperand(3); Args.push_back(Entry);
- std::pair<SDOperand,SDOperand> CallResult =
- LowerCallTo(Chain, Type::VoidTy, false, false, CallingConv::C, false,
- DAG.getExternalSymbol("memcpy", IntPtr), Args, DAG);
- return CallResult.second;
- }
-
+SDOperand X86TargetLowering::LowerMEMCPYInline(SDOperand Chain,
+ SDOperand Dest,
+ SDOperand Source,
+ unsigned Size,
+ unsigned Align,
+ SelectionDAG &DAG) {
MVT::ValueType AVT;
- SDOperand Count;
unsigned BytesLeft = 0;
- bool TwoRepMovs = false;
switch (Align & 3) {
case 2: // WORD aligned
AVT = MVT::i16;
break;
default: // Byte aligned
AVT = MVT::i8;
- Count = Op.getOperand(3);
break;
}
- if (AVT > MVT::i8) {
- if (I) {
- unsigned UBytes = MVT::getSizeInBits(AVT) / 8;
- Count = DAG.getConstant(I->getValue() / UBytes, getPointerTy());
- BytesLeft = I->getValue() % UBytes;
- } else {
- assert(AVT >= MVT::i32 &&
- "Do not use rep;movs if not at least DWORD aligned");
- Count = DAG.getNode(ISD::SRL, Op.getOperand(3).getValueType(),
- Op.getOperand(3), DAG.getConstant(2, MVT::i8));
- TwoRepMovs = true;
- }
- }
+ unsigned UBytes = MVT::getSizeInBits(AVT) / 8;
+ SDOperand Count = DAG.getConstant(Size / UBytes, getPointerTy());
+ BytesLeft = Size % UBytes;
SDOperand InFlag(0, 0);
Chain = DAG.getCopyToReg(Chain, Subtarget->is64Bit() ? X86::RCX : X86::ECX,
Count, InFlag);
InFlag = Chain.getValue(1);
Chain = DAG.getCopyToReg(Chain, Subtarget->is64Bit() ? X86::RDI : X86::EDI,
- Op.getOperand(1), InFlag);
+ Dest, InFlag);
InFlag = Chain.getValue(1);
Chain = DAG.getCopyToReg(Chain, Subtarget->is64Bit() ? X86::RSI : X86::ESI,
- Op.getOperand(2), InFlag);
+ Source, InFlag);
InFlag = Chain.getValue(1);
SDVTList Tys = DAG.getVTList(MVT::Other, MVT::Flag);
Ops.push_back(InFlag);
Chain = DAG.getNode(X86ISD::REP_MOVS, Tys, &Ops[0], Ops.size());
- if (TwoRepMovs) {
- InFlag = Chain.getValue(1);
- Count = Op.getOperand(3);
- MVT::ValueType CVT = Count.getValueType();
- SDOperand Left = DAG.getNode(ISD::AND, CVT, Count,
- DAG.getConstant((AVT == MVT::i64) ? 7 : 3, CVT));
- Chain = DAG.getCopyToReg(Chain, (CVT == MVT::i64) ? X86::RCX : X86::ECX,
- Left, InFlag);
- InFlag = Chain.getValue(1);
- Tys = DAG.getVTList(MVT::Other, MVT::Flag);
- Ops.clear();
- Ops.push_back(Chain);
- Ops.push_back(DAG.getValueType(MVT::i8));
- Ops.push_back(InFlag);
- Chain = DAG.getNode(X86ISD::REP_MOVS, Tys, &Ops[0], Ops.size());
- } else if (BytesLeft) {
+ if (BytesLeft) {
// Issue loads and stores for the last 1 - 7 bytes.
- unsigned Offset = I->getValue() - BytesLeft;
- SDOperand DstAddr = Op.getOperand(1);
+ unsigned Offset = Size - BytesLeft;
+ SDOperand DstAddr = Dest;
MVT::ValueType DstVT = DstAddr.getValueType();
- SDOperand SrcAddr = Op.getOperand(2);
+ SDOperand SrcAddr = Source;
MVT::ValueType SrcVT = SrcAddr.getValueType();
SDOperand Value;
if (BytesLeft >= 4) {
return Chain;
}
-SDOperand
-X86TargetLowering::LowerREADCYCLCECOUNTER(SDOperand Op, SelectionDAG &DAG) {
+/// Expand the result of: i64,outchain = READCYCLECOUNTER inchain
+SDNode *X86TargetLowering::ExpandREADCYCLECOUNTER(SDNode *N, SelectionDAG &DAG){
SDVTList Tys = DAG.getVTList(MVT::Other, MVT::Flag);
- SDOperand TheOp = Op.getOperand(0);
- SDOperand rd = DAG.getNode(X86ISD::RDTSC_DAG, Tys, &TheOp, 1);
+ SDOperand TheChain = N->getOperand(0);
+ SDOperand rd = DAG.getNode(X86ISD::RDTSC_DAG, Tys, &TheChain, 1);
if (Subtarget->is64Bit()) {
- SDOperand Copy1 = DAG.getCopyFromReg(rd, X86::RAX, MVT::i64, rd.getValue(1));
- SDOperand Copy2 = DAG.getCopyFromReg(Copy1.getValue(1), X86::RDX,
- MVT::i64, Copy1.getValue(2));
- SDOperand Tmp = DAG.getNode(ISD::SHL, MVT::i64, Copy2,
+ SDOperand rax = DAG.getCopyFromReg(rd, X86::RAX, MVT::i64, rd.getValue(1));
+ SDOperand rdx = DAG.getCopyFromReg(rax.getValue(1), X86::RDX,
+ MVT::i64, rax.getValue(2));
+ SDOperand Tmp = DAG.getNode(ISD::SHL, MVT::i64, rdx,
DAG.getConstant(32, MVT::i8));
SDOperand Ops[] = {
- DAG.getNode(ISD::OR, MVT::i64, Copy1, Tmp), Copy2.getValue(1)
+ DAG.getNode(ISD::OR, MVT::i64, rax, Tmp), rdx.getValue(1)
};
Tys = DAG.getVTList(MVT::i64, MVT::Other);
- return DAG.getNode(ISD::MERGE_VALUES, Tys, Ops, 2);
+ return DAG.getNode(ISD::MERGE_VALUES, Tys, Ops, 2).Val;
}
- SDOperand Copy1 = DAG.getCopyFromReg(rd, X86::EAX, MVT::i32, rd.getValue(1));
- SDOperand Copy2 = DAG.getCopyFromReg(Copy1.getValue(1), X86::EDX,
- MVT::i32, Copy1.getValue(2));
- SDOperand Ops[] = { Copy1, Copy2, Copy2.getValue(1) };
- Tys = DAG.getVTList(MVT::i32, MVT::i32, MVT::Other);
- return DAG.getNode(ISD::MERGE_VALUES, Tys, Ops, 3);
+ SDOperand eax = DAG.getCopyFromReg(rd, X86::EAX, MVT::i32, rd.getValue(1));
+ SDOperand edx = DAG.getCopyFromReg(eax.getValue(1), X86::EDX,
+ MVT::i32, eax.getValue(2));
+ // Use a buildpair to merge the two 32-bit values into a 64-bit one.
+ SDOperand Ops[] = { eax, edx };
+ Ops[0] = DAG.getNode(ISD::BUILD_PAIR, MVT::i64, Ops, 2);
+
+ // Use a MERGE_VALUES to return the value and chain.
+ Ops[1] = edx.getValue(1);
+ Tys = DAG.getVTList(MVT::i64, MVT::Other);
+ return DAG.getNode(ISD::MERGE_VALUES, Tys, Ops, 2).Val;
}
SDOperand X86TargetLowering::LowerVASTART(SDOperand Op, SelectionDAG &DAG) {
SDOperand RHS = Op.getOperand(2);
translateX86CC(CC, true, X86CC, LHS, RHS, DAG);
- const MVT::ValueType *VTs = DAG.getNodeValueTypes(MVT::Other, MVT::Flag);
- SDOperand Ops1[] = { DAG.getEntryNode(), LHS, RHS };
- SDOperand Cond = DAG.getNode(Opc, VTs, 2, Ops1, 3);
- VTs = DAG.getNodeValueTypes(MVT::i8, MVT::Flag);
- SDOperand Ops2[] = { DAG.getConstant(X86CC, MVT::i8), Cond };
- SDOperand SetCC = DAG.getNode(X86ISD::SETCC, VTs, 2, Ops2, 2);
+ SDOperand Cond = DAG.getNode(Opc, MVT::i32, LHS, RHS);
+ SDOperand SetCC = DAG.getNode(X86ISD::SETCC, MVT::i8,
+ DAG.getConstant(X86CC, MVT::i8), Cond);
return DAG.getNode(ISD::ANY_EXTEND, MVT::i32, SetCC);
}
}
default:
assert(0 && "Unsupported calling convention");
case CallingConv::C:
- case CallingConv::Fast:
case CallingConv::X86_StdCall: {
// Pass 'nest' parameter in ECX.
// Must be kept in sync with X86CallingConv.td
}
}
+SDOperand X86TargetLowering::LowerFLT_ROUNDS(SDOperand Op, SelectionDAG &DAG) {
+ /*
+ The rounding mode is in bits 11:10 of FPSR, and has the following
+ settings:
+ 00 Round to nearest
+ 01 Round to -inf
+ 10 Round to +inf
+ 11 Round to 0
+
+ FLT_ROUNDS, on the other hand, expects the following:
+ -1 Undefined
+ 0 Round to 0
+ 1 Round to nearest
+ 2 Round to +inf
+ 3 Round to -inf
+
+ To perform the conversion, we do:
+ (((((FPSR & 0x800) >> 11) | ((FPSR & 0x400) >> 9)) + 1) & 3)
+ */
+
+ MachineFunction &MF = DAG.getMachineFunction();
+ const TargetMachine &TM = MF.getTarget();
+ const TargetFrameInfo &TFI = *TM.getFrameInfo();
+ unsigned StackAlignment = TFI.getStackAlignment();
+ MVT::ValueType VT = Op.getValueType();
+
+ // Save FP Control Word to stack slot
+ int SSFI = MF.getFrameInfo()->CreateStackObject(2, StackAlignment);
+ SDOperand StackSlot = DAG.getFrameIndex(SSFI, getPointerTy());
+
+ SDOperand Chain = DAG.getNode(X86ISD::FNSTCW16m, MVT::Other,
+ DAG.getEntryNode(), StackSlot);
+
+ // Load FP Control Word from stack slot
+ SDOperand CWD = DAG.getLoad(MVT::i16, Chain, StackSlot, NULL, 0);
+
+ // Transform as necessary
+ SDOperand CWD1 =
+ DAG.getNode(ISD::SRL, MVT::i16,
+ DAG.getNode(ISD::AND, MVT::i16,
+ CWD, DAG.getConstant(0x800, MVT::i16)),
+ DAG.getConstant(11, MVT::i8));
+ SDOperand CWD2 =
+ DAG.getNode(ISD::SRL, MVT::i16,
+ DAG.getNode(ISD::AND, MVT::i16,
+ CWD, DAG.getConstant(0x400, MVT::i16)),
+ DAG.getConstant(9, MVT::i8));
+
+ SDOperand RetVal =
+ DAG.getNode(ISD::AND, MVT::i16,
+ DAG.getNode(ISD::ADD, MVT::i16,
+ DAG.getNode(ISD::OR, MVT::i16, CWD1, CWD2),
+ DAG.getConstant(1, MVT::i16)),
+ DAG.getConstant(3, MVT::i16));
+
+
+ return DAG.getNode((MVT::getSizeInBits(VT) < 16 ?
+ ISD::TRUNCATE : ISD::ZERO_EXTEND), VT, RetVal);
+}
+
/// LowerOperation - Provide custom lowering hooks for some operations.
///
SDOperand X86TargetLowering::LowerOperation(SDOperand Op, SelectionDAG &DAG) {
case ISD::FABS: return LowerFABS(Op, DAG);
case ISD::FNEG: return LowerFNEG(Op, DAG);
case ISD::FCOPYSIGN: return LowerFCOPYSIGN(Op, DAG);
- case ISD::SETCC: return LowerSETCC(Op, DAG, DAG.getEntryNode());
+ case ISD::SETCC: return LowerSETCC(Op, DAG);
case ISD::SELECT: return LowerSELECT(Op, DAG);
case ISD::BRCOND: return LowerBRCOND(Op, DAG);
case ISD::JumpTable: return LowerJumpTable(Op, DAG);
case ISD::FORMAL_ARGUMENTS: return LowerFORMAL_ARGUMENTS(Op, DAG);
case ISD::MEMSET: return LowerMEMSET(Op, DAG);
case ISD::MEMCPY: return LowerMEMCPY(Op, DAG);
- case ISD::READCYCLECOUNTER: return LowerREADCYCLCECOUNTER(Op, DAG);
case ISD::VASTART: return LowerVASTART(Op, DAG);
case ISD::VACOPY: return LowerVACOPY(Op, DAG);
case ISD::INTRINSIC_WO_CHAIN: return LowerINTRINSIC_WO_CHAIN(Op, DAG);
case ISD::DYNAMIC_STACKALLOC: return LowerDYNAMIC_STACKALLOC(Op, DAG);
case ISD::EH_RETURN: return LowerEH_RETURN(Op, DAG);
case ISD::TRAMPOLINE: return LowerTRAMPOLINE(Op, DAG);
+ case ISD::FLT_ROUNDS: return LowerFLT_ROUNDS(Op, DAG);
+
+
+ // FIXME: REMOVE THIS WHEN LegalizeDAGTypes lands.
+ case ISD::READCYCLECOUNTER:
+ return SDOperand(ExpandREADCYCLECOUNTER(Op.Val, DAG), 0);
+ }
+}
+
+/// ExpandOperation - Provide custom lowering hooks for expanding operations.
+SDNode *X86TargetLowering::ExpandOperationResult(SDNode *N, SelectionDAG &DAG) {
+ switch (N->getOpcode()) {
+ default: assert(0 && "Should not custom lower this!");
+ case ISD::FP_TO_SINT: return ExpandFP_TO_SINT(N, DAG);
+ case ISD::READCYCLECOUNTER: return ExpandREADCYCLECOUNTER(N, DAG);
}
- return SDOperand();
}
const char *X86TargetLowering::getTargetNodeName(unsigned Opcode) const {
case X86ISD::TLSADDR: return "X86ISD::TLSADDR";
case X86ISD::THREAD_POINTER: return "X86ISD::THREAD_POINTER";
case X86ISD::EH_RETURN: return "X86ISD::EH_RETURN";
+ case X86ISD::TC_RETURN: return "X86ISD::TC_RETURN";
+ case X86ISD::FNSTCW16m: return "X86ISD::FNSTCW16m";
}
}
}
+bool X86TargetLowering::isTruncateFree(const Type *Ty1, const Type *Ty2) const {
+ if (!Ty1->isInteger() || !Ty2->isInteger())
+ return false;
+ unsigned NumBits1 = Ty1->getPrimitiveSizeInBits();
+ unsigned NumBits2 = Ty2->getPrimitiveSizeInBits();
+ if (NumBits1 <= NumBits2)
+ return false;
+ return Subtarget->is64Bit() || NumBits1 < 64;
+}
+
+bool X86TargetLowering::isTruncateFree(MVT::ValueType VT1,
+ MVT::ValueType VT2) const {
+ if (!MVT::isInteger(VT1) || !MVT::isInteger(VT2))
+ return false;
+ unsigned NumBits1 = MVT::getSizeInBits(VT1);
+ unsigned NumBits2 = MVT::getSizeInBits(VT2);
+ if (NumBits1 <= NumBits2)
+ return false;
+ return Subtarget->is64Bit() || NumBits1 < 64;
+}
+
/// isShuffleMaskLegal - Targets can use this to indicate that they only
/// support *some* VECTOR_SHUFFLE operations, those with specific masks.
/// By default, if a target supports the VECTOR_SHUFFLE node, all mask values
i %= NumElems;
if (V.getOpcode() == ISD::SCALAR_TO_VECTOR) {
return (i == 0)
- ? V.getOperand(0) : DAG.getNode(ISD::UNDEF, MVT::getVectorElementType(VT));
+ ? V.getOperand(0) : DAG.getNode(ISD::UNDEF, MVT::getVectorElementType(VT));
} else if (V.getOpcode() == ISD::VECTOR_SHUFFLE) {
SDOperand Idx = PermMask.getOperand(i);
if (Idx.getOpcode() == ISD::UNDEF)
return make_vector<unsigned>(X86::AX, X86::DX, X86::CX, X86::BX, 0);
else if (VT == MVT::i8)
return make_vector<unsigned>(X86::AL, X86::DL, X86::CL, X86::BL, 0);
- break;
+ else if (VT == MVT::i64)
+ return make_vector<unsigned>(X86::RAX, X86::RDX, X86::RCX, X86::RBX, 0);
+ break;
}
}
// GCC calls "st(0)" just plain "st".
if (StringsEqualNoCase("{st}", Constraint)) {
Res.first = X86::ST0;
- Res.second = X86::RSTRegisterClass;
+ Res.second = X86::RFP80RegisterClass;
}
return Res;
projects / oota-llvm.git / blobdiff