-//===-- PPC32JITInfo.cpp - Implement the JIT interfaces for the PowerPC ---===//
-//
+//===-- PPCJITInfo.cpp - Implement the JIT interfaces for the PowerPC -----===//
+//
// The LLVM Compiler Infrastructure
//
// This file was developed by the LLVM research group and is distributed under
// the University of Illinois Open Source License. See LICENSE.TXT for details.
-//
+//
//===----------------------------------------------------------------------===//
//
// This file implements the JIT interfaces for the 32-bit PowerPC target.
//===----------------------------------------------------------------------===//
#define DEBUG_TYPE "jit"
-#include "PPC32JITInfo.h"
-#include "PPC32Relocations.h"
+#include "PPCJITInfo.h"
+#include "PPCRelocations.h"
#include "llvm/CodeGen/MachineCodeEmitter.h"
#include "llvm/Config/alloca.h"
+#include "llvm/Support/Debug.h"
#include <set>
using namespace llvm;
((15 << 26) | ((RD) << 21) | ((RS) << 16) | ((IMM16) & 65535))
#define BUILD_ORI(RD,RS,UIMM16) \
((24 << 26) | ((RS) << 21) | ((RD) << 16) | ((UIMM16) & 65535))
+#define BUILD_ORIS(RD,RS,UIMM16) \
+ ((25 << 26) | ((RS) << 21) | ((RD) << 16) | ((UIMM16) & 65535))
+#define BUILD_RLDICR(RD,RS,SH,ME) \
+ ((30 << 26) | ((RS) << 21) | ((RD) << 16) | (((SH) & 31) << 11) | \
+ (((ME) & 63) << 6) | (1 << 3) | (((SH) >> 5) & 1))
#define BUILD_MTSPR(RS,SPR) \
((31 << 26) | ((RS) << 21) | ((SPR) << 16) | (467 << 1))
#define BUILD_BCCTRx(BO,BI,LINK) \
((19 << 26) | ((BO) << 21) | ((BI) << 16) | (528 << 1) | ((LINK) & 1))
+#define BUILD_B(TARGET, LINK) \
+ ((18 << 26) | (((TARGET) & 0x00FFFFFF) << 2) | ((LINK) & 1))
// Pseudo-ops
#define BUILD_LIS(RD,IMM16) BUILD_ADDIS(RD,0,IMM16)
+#define BUILD_SLDI(RD,RS,IMM6) BUILD_RLDICR(RD,RS,IMM6,63-IMM6)
#define BUILD_MTCTR(RS) BUILD_MTSPR(RS,9)
#define BUILD_BCTR(LINK) BUILD_BCCTRx(20,0,LINK)
+static void EmitBranchToAt(uint64_t At, uint64_t To, bool isCall, bool is64Bit){
+ intptr_t Offset = ((intptr_t)To - (intptr_t)At) >> 2;
+ unsigned *AtI = (unsigned*)(intptr_t)At;
-static void EmitBranchToAt(void *At, void *To, bool isCall) {
- intptr_t Addr = (intptr_t)To;
-
- // FIXME: should special case the short branch case.
- unsigned *AtI = (unsigned*)At;
-
- AtI[0] = BUILD_LIS(12, Addr >> 16); // lis r12, hi16(address)
- AtI[1] = BUILD_ORI(12, 12, Addr); // ori r12, r12, low16(address)
- AtI[2] = BUILD_MTCTR(12); // mtctr r12
- AtI[3] = BUILD_BCTR(isCall); // bctr/bctrl
+ if (Offset >= -(1 << 23) && Offset < (1 << 23)) { // In range?
+ AtI[0] = BUILD_B(Offset, isCall); // b/bl target
+ } else if (!is64Bit) {
+ AtI[0] = BUILD_LIS(12, To >> 16); // lis r12, hi16(address)
+ AtI[1] = BUILD_ORI(12, 12, To); // ori r12, r12, lo16(address)
+ AtI[2] = BUILD_MTCTR(12); // mtctr r12
+ AtI[3] = BUILD_BCTR(isCall); // bctr/bctrl
+ } else {
+ AtI[0] = BUILD_LIS(12, To >> 48); // lis r12, hi16(address)
+ AtI[1] = BUILD_ORI(12, 12, To >> 32); // ori r12, r12, lo16(address)
+ AtI[2] = BUILD_SLDI(12, 12, 32); // sldi r12, r12, 32
+ AtI[3] = BUILD_ORIS(12, 12, To >> 16); // oris r12, r12, hi16(address)
+ AtI[4] = BUILD_ORI(12, 12, To); // ori r12, r12, lo16(address)
+ AtI[5] = BUILD_MTCTR(12); // mtctr r12
+ AtI[6] = BUILD_BCTR(isCall); // bctr/bctrl
+ }
}
extern "C" void PPC32CompilationCallback();
+extern "C" void PPC64CompilationCallback();
-#if defined(__POWERPC__) || defined (__ppc__) || defined(_POWER)
+#if (defined(__POWERPC__) || defined (__ppc__) || defined(_POWER)) && \
+ !defined(__ppc64__)
// CompilationCallback stub - We can't use a C function with inline assembly in
// it, because we the prolog/epilog inserted by GCC won't work for us. Instead,
// write our own wrapper, which does things our way, so we have complete control
".align 2\n"
".globl _PPC32CompilationCallback\n"
"_PPC32CompilationCallback:\n"
- // Make space for 29 ints r[3-31] and 14 doubles f[0-13]
- "stwu r1, -272(r1)\n"
- "mflr r11\n"
- "stw r11, 280(r1)\n" // Set up a proper stack frame
- "stmw r3, 156(r1)\n" // Save all of the integer registers
+ // Make space for 8 ints r[3-10] and 13 doubles f[1-13] and the
+ // FIXME: need to save v[0-19] for altivec?
+ // FIXME: could shrink frame
+ // Set up a proper stack frame
+ "stwu r1, -208(r1)\n"
+ "mflr r0\n"
+ "stw r0, 216(r1)\n"
+ // Save all int arg registers
+ "stw r10, 204(r1)\n" "stw r9, 200(r1)\n"
+ "stw r8, 196(r1)\n" "stw r7, 192(r1)\n"
+ "stw r6, 188(r1)\n" "stw r5, 184(r1)\n"
+ "stw r4, 180(r1)\n" "stw r3, 176(r1)\n"
// Save all call-clobbered FP regs.
- "stfd f1, 44(r1)\n" "stfd f2, 52(r1)\n" "stfd f3, 60(r1)\n"
- "stfd f4, 68(r1)\n" "stfd f5, 76(r1)\n" "stfd f6, 84(r1)\n"
- "stfd f7, 92(r1)\n" "stfd f8, 100(r1)\n" "stfd f9, 108(r1)\n"
- "stfd f10, 116(r1)\n" "stfd f11, 124(r1)\n" "stfd f12, 132(r1)\n"
- "stfd f13, 140(r1)\n"
-
- // Now that everything is saved, go to the C compilation callback function,
- // passing the address of the intregs and fpregs.
- "addi r3, r1, 156\n" // &IntRegs[0]
- "addi r4, r1, 44\n" // &FPRegs[0]
- "bl _PPC32CompilationCallbackC\n"
+ "stfd f13, 168(r1)\n" "stfd f12, 160(r1)\n"
+ "stfd f11, 152(r1)\n" "stfd f10, 144(r1)\n"
+ "stfd f9, 136(r1)\n" "stfd f8, 128(r1)\n"
+ "stfd f7, 120(r1)\n" "stfd f6, 112(r1)\n"
+ "stfd f5, 104(r1)\n" "stfd f4, 96(r1)\n"
+ "stfd f3, 88(r1)\n" "stfd f2, 80(r1)\n"
+ "stfd f1, 72(r1)\n"
+ // Arguments to Compilation Callback:
+ // r3 - our lr (address of the call instruction in stub plus 4)
+ // r4 - stub's lr (address of instruction that called the stub plus 4)
+ "mr r3, r0\n"
+ "lwz r2, 208(r1)\n" // stub's frame
+ "lwz r4, 8(r2)\n" // stub's lr
+ "li r5, 0\n" // 0 == 32 bit
+ "bl _PPCCompilationCallbackC\n"
+ "mtctr r3\n"
+ // Restore all int arg registers
+ "lwz r10, 204(r1)\n" "lwz r9, 200(r1)\n"
+ "lwz r8, 196(r1)\n" "lwz r7, 192(r1)\n"
+ "lwz r6, 188(r1)\n" "lwz r5, 184(r1)\n"
+ "lwz r4, 180(r1)\n" "lwz r3, 176(r1)\n"
+ // Restore all FP arg registers
+ "lfd f13, 168(r1)\n" "lfd f12, 160(r1)\n"
+ "lfd f11, 152(r1)\n" "lfd f10, 144(r1)\n"
+ "lfd f9, 136(r1)\n" "lfd f8, 128(r1)\n"
+ "lfd f7, 120(r1)\n" "lfd f6, 112(r1)\n"
+ "lfd f5, 104(r1)\n" "lfd f4, 96(r1)\n"
+ "lfd f3, 88(r1)\n" "lfd f2, 80(r1)\n"
+ "lfd f1, 72(r1)\n"
+ // Pop 3 frames off the stack and branch to target
+ "lwz r1, 208(r1)\n"
+ "lwz r2, 8(r1)\n"
+ "mtlr r2\n"
+ "bctr\n"
);
#else
void PPC32CompilationCallback() {
}
#endif
-extern "C" void PPC32CompilationCallbackC(unsigned *IntRegs, double *FPRegs) {
- unsigned *CameFromStub = (unsigned*)__builtin_return_address(0+1);
- unsigned *CameFromOrig = (unsigned*)__builtin_return_address(1+1);
- unsigned *CCStackPtr = (unsigned*)__builtin_frame_address(0);
-//unsigned *StubStackPtr = (unsigned*)__builtin_frame_address(1);
- unsigned *OrigStackPtr = (unsigned*)__builtin_frame_address(2+1);
+#if (defined(__POWERPC__) || defined (__ppc__) || defined(_POWER)) && \
+ defined(__ppc64__)
+asm(
+ ".text\n"
+ ".align 2\n"
+ ".globl _PPC64CompilationCallback\n"
+"_PPC64CompilationCallback:\n"
+ // Make space for 8 ints r[3-10] and 13 doubles f[1-13] and the
+ // FIXME: need to save v[0-19] for altivec?
+ // Set up a proper stack frame
+ "stdu r1, -208(r1)\n"
+ "mflr r0\n"
+ "std r0, 224(r1)\n"
+ // Save all int arg registers
+ "std r10, 200(r1)\n" "std r9, 192(r1)\n"
+ "std r8, 184(r1)\n" "std r7, 176(r1)\n"
+ "std r6, 168(r1)\n" "std r5, 160(r1)\n"
+ "std r4, 152(r1)\n" "std r3, 144(r1)\n"
+ // Save all call-clobbered FP regs.
+ "stfd f13, 136(r1)\n" "stfd f12, 128(r1)\n"
+ "stfd f11, 120(r1)\n" "stfd f10, 112(r1)\n"
+ "stfd f9, 104(r1)\n" "stfd f8, 96(r1)\n"
+ "stfd f7, 88(r1)\n" "stfd f6, 80(r1)\n"
+ "stfd f5, 72(r1)\n" "stfd f4, 64(r1)\n"
+ "stfd f3, 56(r1)\n" "stfd f2, 48(r1)\n"
+ "stfd f1, 40(r1)\n"
+ // Arguments to Compilation Callback:
+ // r3 - our lr (address of the call instruction in stub plus 4)
+ // r4 - stub's lr (address of instruction that called the stub plus 4)
+ "mr r3, r0\n"
+ "ld r2, 208(r1)\n" // stub's frame
+ "ld r4, 16(r2)\n" // stub's lr
+ "li r5, 1\n" // 1 == 64 bit
+ "bl _PPCCompilationCallbackC\n"
+ "mtctr r3\n"
+ // Restore all int arg registers
+ "ld r10, 200(r1)\n" "ld r9, 192(r1)\n"
+ "ld r8, 184(r1)\n" "ld r7, 176(r1)\n"
+ "ld r6, 168(r1)\n" "ld r5, 160(r1)\n"
+ "ld r4, 152(r1)\n" "ld r3, 144(r1)\n"
+ // Restore all FP arg registers
+ "lfd f13, 136(r1)\n" "lfd f12, 128(r1)\n"
+ "lfd f11, 120(r1)\n" "lfd f10, 112(r1)\n"
+ "lfd f9, 104(r1)\n" "lfd f8, 96(r1)\n"
+ "lfd f7, 88(r1)\n" "lfd f6, 80(r1)\n"
+ "lfd f5, 72(r1)\n" "lfd f4, 64(r1)\n"
+ "lfd f3, 56(r1)\n" "lfd f2, 48(r1)\n"
+ "lfd f1, 40(r1)\n"
+ // Pop 3 frames off the stack and branch to target
+ "ld r1, 208(r1)\n"
+ "ld r2, 16(r1)\n"
+ "mtlr r2\n"
+ "bctr\n"
+ );
+#else
+void PPC64CompilationCallback() {
+ assert(0 && "This is not a power pc, you can't execute this!");
+ abort();
+}
+#endif
- // Adjust pointer to the branch, not the return address.
- --CameFromStub;
+extern "C" void *PPCCompilationCallbackC(unsigned *StubCallAddrPlus4,
+ unsigned *OrigCallAddrPlus4,
+ bool is64Bit) {
+ // Adjust the pointer to the address of the call instruction in the stub
+ // emitted by emitFunctionStub, rather than the instruction after it.
+ unsigned *StubCallAddr = StubCallAddrPlus4 - 1;
+ unsigned *OrigCallAddr = OrigCallAddrPlus4 - 1;
- void *Target = JITCompilerFunction(CameFromStub);
+ void *Target = JITCompilerFunction(StubCallAddr);
- // Check to see if CameFromOrig[-1] is a 'bl' instruction, and if we can
- // rewrite it to branch directly to the destination. If so, rewrite it so it
- // does not need to go through the stub anymore.
- unsigned CameFromOrigInst = CameFromOrig[-1];
- if ((CameFromOrigInst >> 26) == 18) { // Direct call.
- intptr_t Offset = ((intptr_t)Target-(intptr_t)CameFromOrig+4) >> 2;
+ // Check to see if *OrigCallAddr is a 'bl' instruction, and if we can rewrite
+ // it to branch directly to the destination. If so, rewrite it so it does not
+ // need to go through the stub anymore.
+ unsigned OrigCallInst = *OrigCallAddr;
+ if ((OrigCallInst >> 26) == 18) { // Direct call.
+ intptr_t Offset = ((intptr_t)Target - (intptr_t)OrigCallAddr) >> 2;
+
if (Offset >= -(1 << 23) && Offset < (1 << 23)) { // In range?
// Clear the original target out.
- CameFromOrigInst &= (63 << 26) | 3;
+ OrigCallInst &= (63 << 26) | 3;
// Fill in the new target.
- CameFromOrigInst |= (Offset & ((1 << 24)-1)) << 2;
+ OrigCallInst |= (Offset & ((1 << 24)-1)) << 2;
// Replace the call.
- CameFromOrig[-1] = CameFromOrigInst;
+ *OrigCallAddr = OrigCallInst;
}
}
-
- // Locate the start of the stub. If this is a short call, adjust backwards
- // the short amount, otherwise the full amount.
- bool isShortStub = (*CameFromStub >> 26) == 18;
- CameFromStub -= isShortStub ? 2 : 6;
+
+ // Assert that we are coming from a stub that was created with our
+ // emitFunctionStub.
+ if ((*StubCallAddr >> 26) == 18)
+ StubCallAddr -= 3;
+ else {
+ assert((*StubCallAddr >> 26) == 19 && "Call in stub is not indirect!");
+ StubCallAddr -= is64Bit ? 9 : 6;
+ }
// Rewrite the stub with an unconditional branch to the target, for any users
// who took the address of the stub.
- EmitBranchToAt(CameFromStub, Target, false);
-
- // Change the SP so that we pop two stack frames off when we return.
- *CCStackPtr = (intptr_t)OrigStackPtr;
-
- // Put the address of the stub and the LR value that originally came into the
- // stub in a place that is easy to get on the stack after we restore all regs.
- CCStackPtr[2] = (intptr_t)Target;
- CCStackPtr[1] = (intptr_t)CameFromOrig;
-
- // Note, this is not a standard epilog!
-#if defined(__POWERPC__) || defined (__ppc__) || defined(_POWER)
- register unsigned *IRR asm ("r2") = IntRegs;
- register double *FRR asm ("r3") = FPRegs;
- __asm__ __volatile__ (
- "lfd f1, 0(%0)\n" "lfd f2, 8(%0)\n" "lfd f3, 16(%0)\n"
- "lfd f4, 24(%0)\n" "lfd f5, 32(%0)\n" "lfd f6, 40(%0)\n"
- "lfd f7, 48(%0)\n" "lfd f8, 56(%0)\n" "lfd f9, 64(%0)\n"
- "lfd f10, 72(%0)\n" "lfd f11, 80(%0)\n" "lfd f12, 88(%0)\n"
- "lfd f13, 96(%0)\n"
- "lmw r3, 0(%1)\n" // Load all integer regs
- "lwz r0,4(r1)\n" // Get CameFromOrig (LR into stub)
- "mtlr r0\n" // Put it in the LR register
- "lwz r0,8(r1)\n" // Get target function pointer
- "mtctr r0\n" // Put it into the CTR register
- "lwz r1,0(r1)\n" // Pop two frames off
- "bctr\n" :: // Return to stub!
- "b" (FRR), "b" (IRR));
-#endif
+ EmitBranchToAt((intptr_t)StubCallAddr, (intptr_t)Target, false, is64Bit);
+
+ // Put the address of the target function to call and the address to return to
+ // after calling the target function in a place that is easy to get on the
+ // stack after we restore all regs.
+ return Target;
}
-TargetJITInfo::LazyResolverFn
-PPC32JITInfo::getLazyResolverFunction(JITCompilerFn Fn) {
+TargetJITInfo::LazyResolverFn
+PPCJITInfo::getLazyResolverFunction(JITCompilerFn Fn) {
JITCompilerFunction = Fn;
- return PPC32CompilationCallback;
+ return is64Bit ? PPC64CompilationCallback : PPC32CompilationCallback;
}
-void *PPC32JITInfo::emitFunctionStub(void *Fn, MachineCodeEmitter &MCE) {
+void *PPCJITInfo::emitFunctionStub(void *Fn, MachineCodeEmitter &MCE) {
// If this is just a call to an external function, emit a branch instead of a
// call. The code is the same except for one bit of the last instruction.
- if (Fn != PPC32CompilationCallback) {
- MCE.startFunctionStub(4*4);
- void *Addr = (void*)(intptr_t)MCE.getCurrentPCValue();
- MCE.emitWord(0);
- MCE.emitWord(0);
- MCE.emitWord(0);
- MCE.emitWord(0);
- EmitBranchToAt(Addr, Fn, false);
+ if (Fn != (void*)(intptr_t)PPC32CompilationCallback &&
+ Fn != (void*)(intptr_t)PPC64CompilationCallback) {
+ MCE.startFunctionStub(7*4);
+ intptr_t Addr = (intptr_t)MCE.getCurrentPCValue();
+ MCE.emitWordBE(0);
+ MCE.emitWordBE(0);
+ MCE.emitWordBE(0);
+ MCE.emitWordBE(0);
+ MCE.emitWordBE(0);
+ MCE.emitWordBE(0);
+ MCE.emitWordBE(0);
+ EmitBranchToAt(Addr, (intptr_t)Fn, false, is64Bit);
return MCE.finishFunctionStub(0);
}
- MCE.startFunctionStub(4*7);
- MCE.emitWord(0x9421ffe0); // stwu r1,-32(r1)
- MCE.emitWord(0x7d6802a6); // mflr r11
- MCE.emitWord(0x91610028); // stw r11, 40(r1)
- void *Addr = (void*)(intptr_t)MCE.getCurrentPCValue();
- MCE.emitWord(0);
- MCE.emitWord(0);
- MCE.emitWord(0);
- MCE.emitWord(0);
- EmitBranchToAt(Addr, Fn, true/*is call*/);
+ MCE.startFunctionStub(10*4);
+ if (is64Bit) {
+ MCE.emitWordBE(0xf821ffb1); // stdu r1,-80(r1)
+ MCE.emitWordBE(0x7d6802a6); // mflr r11
+ MCE.emitWordBE(0xf9610060); // std r11, 96(r1)
+ } else {
+ MCE.emitWordBE(0x9421ffe0); // stwu r1,-32(r1)
+ MCE.emitWordBE(0x7d6802a6); // mflr r11
+ MCE.emitWordBE(0x91610028); // stw r11, 40(r1)
+ }
+ intptr_t Addr = (intptr_t)MCE.getCurrentPCValue();
+ MCE.emitWordBE(0);
+ MCE.emitWordBE(0);
+ MCE.emitWordBE(0);
+ MCE.emitWordBE(0);
+ MCE.emitWordBE(0);
+ MCE.emitWordBE(0);
+ MCE.emitWordBE(0);
+ EmitBranchToAt(Addr, (intptr_t)Fn, true, is64Bit);
return MCE.finishFunctionStub(0);
}
-void PPC32JITInfo::relocate(void *Function, MachineRelocation *MR,
- unsigned NumRelocs) {
+void PPCJITInfo::relocate(void *Function, MachineRelocation *MR,
+ unsigned NumRelocs, unsigned char* GOTBase) {
for (unsigned i = 0; i != NumRelocs; ++i, ++MR) {
unsigned *RelocPos = (unsigned*)Function + MR->getMachineCodeOffset()/4;
intptr_t ResultPtr = (intptr_t)MR->getResultPointer();
"Relocation out of range!");
*RelocPos |= (ResultPtr & ((1 << 24)-1)) << 2;
break;
-
- case PPC::reloc_absolute_ptr_high: // Pointer relocations.
- case PPC::reloc_absolute_ptr_low: {
- // Pointer relocations are used for the PPC external stubs and lazy
- // resolver pointers that the Darwin ABI likes to use. Basically, the
- // address of the global is actually stored in memory, and the address of
- // the pointer is relocated into instructions instead of the pointer
- // itself. Because we have to keep the mapping anyway, we just return
- // pointers to the values in the map as our new location.
- static std::set<void*> Pointers;
- ResultPtr = (intptr_t)&*Pointers.insert((void*)ResultPtr).first;
- }
- // FALL THROUGH
+ case PPC::reloc_pcrel_bcx:
+ // PC-relative relocation for BLT,BLE,BEQ,BGE,BGT,BNE, or other
+ // bcx instructions.
+ ResultPtr = (ResultPtr-(intptr_t)RelocPos) >> 2;
+ assert(ResultPtr >= -(1 << 13) && ResultPtr < (1 << 13) &&
+ "Relocation out of range!");
+ *RelocPos |= (ResultPtr & ((1 << 14)-1)) << 2;
+ break;
case PPC::reloc_absolute_high: // high bits of ref -> low 16 of instr
- case PPC::reloc_absolute_low: // low bits of ref -> low 16 of instr
+ case PPC::reloc_absolute_low: { // low bits of ref -> low 16 of instr
ResultPtr += MR->getConstantVal();
// If this is a high-part access, get the high-part.
- if (MR->getRelocationType() == PPC::reloc_absolute_high ||
- MR->getRelocationType() == PPC::reloc_absolute_ptr_high) {
+ if (MR->getRelocationType() == PPC::reloc_absolute_high) {
// If the low part will have a carry (really a borrow) from the low
// 16-bits into the high 16, add a bit to borrow from.
if (((int)ResultPtr << 16) < 0)
*RelocPos = LowBits | HighBits; // Slam into low 16-bits
break;
}
+ case PPC::reloc_absolute_low_ix: { // low bits of ref -> low 14 of instr
+ ResultPtr += MR->getConstantVal();
+ // Do the addition then mask, so the addition does not overflow the 16-bit
+ // immediate section of the instruction.
+ unsigned LowBits = (*RelocPos + ResultPtr) & 0xFFFC;
+ unsigned HighBits = *RelocPos & 0xFFFF0003;
+ *RelocPos = LowBits | HighBits; // Slam into low 14-bits.
+ break;
+ }
+ }
}
}
-void PPC32JITInfo::replaceMachineCodeForFunction(void *Old, void *New) {
- EmitBranchToAt(Old, New, false);
+void PPCJITInfo::replaceMachineCodeForFunction(void *Old, void *New) {
+ EmitBranchToAt((intptr_t)Old, (intptr_t)New, false, is64Bit);
}
projects / oota-llvm.git / blobdiff