const MachineFunction &MF = *MI->getParent()->getParent();
const TargetRegisterInfo *RegInfo = MF.getTarget().getRegisterInfo();
+ const ARMFunctionInfo &AFI = *MF.getInfo<ARMFunctionInfo>();
unsigned FramePtr = RegInfo->getFrameRegister(MF);
unsigned Opc = MI->getOpcode();
unsigned SrcReg, DstReg;
- // Special case: tPUSH does not have src/dst regs.
- if (Opc == ARM::tPUSH) {
+ if (Opc == ARM::tPUSH || Opc == ARM::tLDRpci) {
+ // Two special cases:
+ // 1) tPUSH does not have src/dst regs.
+ // 2) for Thumb1 code we sometimes materialize the constant via constpool
+ // load. Yes, this is pretty fragile, but for now I don't see better
+ // way... :(
SrcReg = DstReg = ARM::SP;
} else {
- SrcReg = MI->getOperand(1).getReg();
+ SrcReg = MI->getOperand(1).getReg();
DstReg = MI->getOperand(0).getReg();
}
assert(0 && "Unsupported opcode for unwinding information");
case ARM::MOVr:
case ARM::tMOVgpr2gpr:
+ case ARM::tMOVgpr2tgpr:
Offset = 0;
break;
case ARM::ADDri:
case ARM::tADDrSPi:
Offset = -MI->getOperand(2).getImm()*4;
break;
+ case ARM::tLDRpci: {
+ // Grab the constpool index and check, whether it corresponds to
+ // original or cloned constpool entry.
+ unsigned CPI = MI->getOperand(1).getIndex();
+ const MachineConstantPool *MCP = MF.getConstantPool();
+ if (CPI >= MCP->getConstants().size())
+ CPI = AFI.getOriginalCPIdx(CPI);
+ assert(CPI != -1U && "Invalid constpool index");
+
+ // Derive the actual offset.
+ const MachineConstantPoolEntry &CPE = MCP->getConstants()[CPI];
+ assert(!CPE.isMachineConstantPoolEntry() && "Invalid constpool entry");
+ // FIXME: Check for user, it should be "add" instruction!
+ Offset = -cast<ConstantInt>(CPE.Val.ConstVal)->getSExtValue();
+ break;
+ }
}
if (DstReg == FramePtr && FramePtr != ARM::SP)
- // Set-up of the frame pointer.
- OutStreamer.EmitSetFP(FramePtr, ARM::SP, Offset);
+ // Set-up of the frame pointer. Positive values correspond to "add"
+ // instruction.
+ OutStreamer.EmitSetFP(FramePtr, ARM::SP, -Offset);
else if (DstReg == ARM::SP) {
- // Change of SP by an offset. Positive values corresponds to "sub"
+ // Change of SP by an offset. Positive values correspond to "sub"
// instruction.
OutStreamer.EmitPad(Offset);
} else {
unsigned Opc = MI->getOpcode();
switch (Opc) {
default: break;
+ case ARM::B: {
+ // B is just a Bcc with an 'always' predicate.
+ MCInst TmpInst;
+ LowerARMMachineInstrToMCInst(MI, TmpInst, *this);
+ TmpInst.setOpcode(ARM::Bcc);
+ // Add predicate operands.
+ TmpInst.addOperand(MCOperand::CreateImm(ARMCC::AL));
+ TmpInst.addOperand(MCOperand::CreateReg(0));
+ OutStreamer.EmitInstruction(TmpInst);
+ return;
+ }
+ case ARM::LDMIA_RET: {
+ // LDMIA_RET is just a normal LDMIA_UPD instruction that targets PC and as
+ // such has additional code-gen properties and scheduling information.
+ // To emit it, we just construct as normal and set the opcode to LDMIA_UPD.
+ MCInst TmpInst;
+ LowerARMMachineInstrToMCInst(MI, TmpInst, *this);
+ TmpInst.setOpcode(ARM::LDMIA_UPD);
+ OutStreamer.EmitInstruction(TmpInst);
+ return;
+ }
case ARM::t2ADDrSPi:
case ARM::t2ADDrSPi12:
case ARM::t2SUBrSPi:
OutStreamer.EmitInstruction(TmpInst);
return;
}
+ // Darwin call instructions are just normal call instructions with different
+ // clobber semantics (they clobber R9).
+ case ARM::BLr9:
+ case ARM::BLr9_pred:
+ case ARM::BLXr9:
+ case ARM::BLXr9_pred: {
+ unsigned newOpc;
+ switch (Opc) {
+ default: assert(0);
+ case ARM::BLr9: newOpc = ARM::BL; break;
+ case ARM::BLr9_pred: newOpc = ARM::BL_pred; break;
+ case ARM::BLXr9: newOpc = ARM::BLX; break;
+ case ARM::BLXr9_pred: newOpc = ARM::BLX_pred; break;
+ }
+ MCInst TmpInst;
+ LowerARMMachineInstrToMCInst(MI, TmpInst, *this);
+ TmpInst.setOpcode(newOpc);
+ OutStreamer.EmitInstruction(TmpInst);
+ return;
+ }
case ARM::BXr9_CALL:
case ARM::BX_CALL: {
{
}
return;
}
+ // Tail jump branches are really just branch instructions with additional
+ // code-gen attributes. Convert them to the canonical form here.
+ case ARM::TAILJMPd:
+ case ARM::TAILJMPdND: {
+ MCInst TmpInst, TmpInst2;
+ // Lower the instruction as-is to get the operands properly converted.
+ LowerARMMachineInstrToMCInst(MI, TmpInst2, *this);
+ TmpInst.setOpcode(ARM::Bcc);
+ TmpInst.addOperand(TmpInst2.getOperand(0));
+ // Add predicate operands.
+ TmpInst.addOperand(MCOperand::CreateImm(ARMCC::AL));
+ TmpInst.addOperand(MCOperand::CreateReg(0));
+ OutStreamer.AddComment("TAILCALL");
+ OutStreamer.EmitInstruction(TmpInst);
+ return;
+ }
+ case ARM::tTAILJMPd:
+ case ARM::tTAILJMPdND: {
+ MCInst TmpInst, TmpInst2;
+ LowerARMMachineInstrToMCInst(MI, TmpInst2, *this);
+ TmpInst.setOpcode(ARM::tB);
+ TmpInst.addOperand(TmpInst2.getOperand(0));
+ OutStreamer.AddComment("TAILCALL");
+ OutStreamer.EmitInstruction(TmpInst);
+ return;
+ }
+ case ARM::TAILJMPrND:
+ case ARM::tTAILJMPrND:
+ case ARM::TAILJMPr:
+ case ARM::tTAILJMPr: {
+ unsigned newOpc = (Opc == ARM::TAILJMPr || Opc == ARM::TAILJMPrND)
+ ? ARM::BX : ARM::tBX;
+ MCInst TmpInst;
+ TmpInst.setOpcode(newOpc);
+ TmpInst.addOperand(MCOperand::CreateReg(MI->getOperand(0).getReg()));
+ // Predicate.
+ TmpInst.addOperand(MCOperand::CreateImm(ARMCC::AL));
+ TmpInst.addOperand(MCOperand::CreateReg(0));
+ OutStreamer.AddComment("TAILCALL");
+ OutStreamer.EmitInstruction(TmpInst);
+ return;
+ }
+
// These are the pseudos created to comply with stricter operand restrictions
// on ARMv5. Lower them now to "normal" instructions, since all the
// restrictions are already satisfied.
//===----------------------------------------------------------------------===//
static MCInstPrinter *createARMMCInstPrinter(const Target &T,
+ TargetMachine &TM,
unsigned SyntaxVariant,
const MCAsmInfo &MAI) {
if (SyntaxVariant == 0)
- return new ARMInstPrinter(MAI);
+ return new ARMInstPrinter(TM, MAI);
return 0;
}
projects / oota-llvm.git / blobdiff