Requirements
============
-In order to use the LLVM testing infrastructure, you will need all of
-the software required to build LLVM, as well as
-`Python <http://python.org>`_ 2.4 or later.
+In order to use the LLVM testing infrastructure, you will need all of the
+software required to build LLVM, as well as `Python <http://python.org>`_ 2.7 or
+later.
LLVM testing infrastructure organization
========================================
% make check-all
-To run the tests with Valgrind (Memcheck by default), just append
-``VG=1`` to the commands above, e.g.:
+To run the tests with Valgrind (Memcheck by default), use the ``LIT_ARGS`` make
+variable to pass the required options to lit. For example, you can use:
.. code-block:: bash
- % make check VG=1
+ % make check LIT_ARGS="-v --vg --vg-leak"
+
+to enable testing with valgrind and with leak checking enabled.
To run individual tests or subsets of tests, you can use the ``llvm-lit``
script which is built as part of LLVM. For example, to run the
the :doc:`FileCheck tool <CommandGuide/FileCheck>`. *[The usage of grep in RUN
lines is deprecated - please do not send or commit patches that use it.]*
+Put related tests into a single file rather than having a separate file per
+test. Check if there are files already covering your feature and consider
+adding your code there instead of creating a new file.
+
+Extra files
+-----------
+
+If your test requires extra files besides the file containing the ``RUN:``
+lines, the idiomatic place to put them is in a subdirectory ``Inputs``.
+You can then refer to the extra files as ``%S/Inputs/foo.bar``.
+
+For example, consider ``test/Linker/ident.ll``. The directory structure is
+as follows::
+
+ test/
+ Linker/
+ ident.ll
+ Inputs/
+ ident.a.ll
+ ident.b.ll
+
+For convenience, these are the contents:
+
+.. code-block:: llvm
+
+ ;;;;; ident.ll:
+
+ ; RUN: llvm-link %S/Inputs/ident.a.ll %S/Inputs/ident.b.ll -S | FileCheck %s
+
+ ; Verify that multiple input llvm.ident metadata are linked together.
+
+ ; CHECK-DAG: !llvm.ident = !{!0, !1, !2}
+ ; CHECK-DAG: "Compiler V1"
+ ; CHECK-DAG: "Compiler V2"
+ ; CHECK-DAG: "Compiler V3"
+
+ ;;;;; Inputs/ident.a.ll:
+
+ !llvm.ident = !{!0, !1}
+ !0 = metadata !{metadata !"Compiler V1"}
+ !1 = metadata !{metadata !"Compiler V2"}
+
+ ;;;;; Inputs/ident.b.ll:
+
+ !llvm.ident = !{!0}
+ !0 = metadata !{metadata !"Compiler V3"}
+
+For symmetry reasons, ``ident.ll`` is just a dummy file that doesn't
+actually participate in the test besides holding the ``RUN:`` lines.
+
+.. note::
+
+ Some existing tests use ``RUN: true`` in extra files instead of just
+ putting the extra files in an ``Inputs/`` directory. This pattern is
+ deprecated.
+
Fragile tests
-------------
To make your tests robust, always use ``opt ... < %s`` in the RUN line.
:program:`opt` does not output a ``ModuleID`` when input comes from stdin.
-Variables and substitutions
----------------------------
+Platform-Specific Tests
+-----------------------
-With a RUN line there are a number of substitutions that are permitted.
-To make a substitution just write the variable's name preceded by a ``$``.
-Additionally, for compatibility reasons with previous versions of the
-test library, certain names can be accessed with an alternate syntax: a
-% prefix. These alternates are deprecated and may go away in a future
-version.
+Whenever adding tests that require the knowledge of a specific platform,
+either related to code generated, specific output or back-end features,
+you must make sure to isolate the features, so that buildbots that
+run on different architectures (and don't even compile all back-ends),
+don't fail.
-Here are the available variable names. The alternate syntax is listed in
-parentheses.
+The first problem is to check for target-specific output, for example sizes
+of structures, paths and architecture names, for example:
-``$test`` (``%s``)
- The full path to the test case's source. This is suitable for passing on
- the command line as the input to an LLVM tool.
+* Tests containing Windows paths will fail on Linux and vice-versa.
+* Tests that check for ``x86_64`` somewhere in the text will fail anywhere else.
+* Tests where the debug information calculates the size of types and structures.
-``%(line)``, ``%(line+<number>)``, ``%(line-<number>)``
- The number of the line where this variable is used, with an optional
- integer offset. This can be used in tests with multiple RUN lines,
- which reference test file's line numbers.
+Also, if the test rely on any behaviour that is coded in any back-end, it must
+go in its own directory. So, for instance, code generator tests for ARM go
+into ``test/CodeGen/ARM`` and so on. Those directories contain a special
+``lit`` configuration file that ensure all tests in that directory will
+only run if a specific back-end is compiled and available.
+
+For instance, on ``test/CodeGen/ARM``, the ``lit.local.cfg`` is:
+
+.. code-block:: python
+
+ config.suffixes = ['.ll', '.c', '.cpp', '.test']
+ if not 'ARM' in config.root.targets:
+ config.unsupported = True
-``$srcdir``
- The source directory from where the ``make check`` was run.
+Other platform-specific tests are those that depend on a specific feature
+of a specific sub-architecture, for example only to Intel chips that support ``AVX2``.
-``objdir``
- The object directory that corresponds to the ``$srcdir``.
+For instance, ``test/CodeGen/X86/psubus.ll`` tests three sub-architecture
+variants:
-``subdir``
- A partial path from the ``test`` directory that contains the
- sub-directory that contains the test source being executed.
+.. code-block:: llvm
+
+ ; RUN: llc -mcpu=core2 < %s | FileCheck %s -check-prefix=SSE2
+ ; RUN: llc -mcpu=corei7-avx < %s | FileCheck %s -check-prefix=AVX1
+ ; RUN: llc -mcpu=core-avx2 < %s | FileCheck %s -check-prefix=AVX2
+
+And the checks are different:
+
+.. code-block:: llvm
+
+ ; SSE2: @test1
+ ; SSE2: psubusw LCPI0_0(%rip), %xmm0
+ ; AVX1: @test1
+ ; AVX1: vpsubusw LCPI0_0(%rip), %xmm0, %xmm0
+ ; AVX2: @test1
+ ; AVX2: vpsubusw LCPI0_0(%rip), %xmm0, %xmm0
-``srcroot``
- The root directory of the LLVM src tree.
+So, if you're testing for a behaviour that you know is platform-specific or
+depends on special features of sub-architectures, you must add the specific
+triple, test with the specific FileCheck and put it into the specific
+directory that will filter out all other architectures.
-``objroot``
- The root directory of the LLVM object tree. This could be the same as
- the srcroot.
-``path``
- The path to the directory that contains the test case source. This is
- for locating any supporting files that are not generated by the test,
- but used by the test.
+Substitutions
+-------------
+
+Besides replacing LLVM tool names the following substitutions are performed in
+RUN lines:
-``tmp``
- The path to a temporary file name that could be used for this test case.
+``%%``
+ Replaced by a single ``%``. This allows escaping other substitutions.
+
+``%s``
+ File path to the test case's source. This is suitable for passing on the
+ command line as the input to an LLVM tool.
+
+ Example: ``/home/user/llvm/test/MC/ELF/foo_test.s``
+
+``%S``
+ Directory path to the test case's source.
+
+ Example: ``/home/user/llvm/test/MC/ELF``
+
+``%t``
+ File path to a temporary file name that could be used for this test case.
The file name won't conflict with other test cases. You can append to it
if you need multiple temporaries. This is useful as the destination of
some redirected output.
-``target_triplet`` (``%target_triplet``)
- The target triplet that corresponds to the current host machine (the one
- running the test cases). This should probably be called "host".
+ Example: ``/home/user/llvm.build/test/MC/ELF/Output/foo_test.s.tmp``
+
+``%T``
+ Directory of ``%t``.
+
+ Example: ``/home/user/llvm.build/test/MC/ELF/Output``
+
+``%{pathsep}``
+
+ Expands to the path separator, i.e. ``:`` (or ``;`` on Windows).
+
+
+**LLVM-specific substitutions:**
+
+``%shlibext``
+ The suffix for the host platforms shared library files. This includes the
+ period as the first character.
+
+ Example: ``.so`` (Linux), ``.dylib`` (OS X), ``.dll`` (Windows)
+
+``%exeext``
+ The suffix for the host platforms executable files. This includes the
+ period as the first character.
+
+ Example: ``.exe`` (Windows), empty on Linux.
+
+``%(line)``, ``%(line+<number>)``, ``%(line-<number>)``
+ The number of the line where this substitution is used, with an optional
+ integer offset. This can be used in tests with multiple RUN lines, which
+ reference test file's line numbers.
+
+
+**Clang-specific substitutions:**
+
+``%clang``
+ Invokes the Clang driver.
+
+``%clang_cpp``
+ Invokes the Clang driver for C++.
+
+``%clang_cl``
+ Invokes the CL-compatible Clang driver.
+
+``%clangxx``
+ Invokes the G++-compatible Clang driver.
+
+``%clang_cc1``
+ Invokes the Clang frontend.
-``link`` (``%link``)
- This full link command used to link LLVM executables. This has all the
- configured ``-I``, ``-L`` and ``-l`` options.
+``%itanium_abi_triple``, ``%ms_abi_triple``
+ These substitutions can be used to get the current target triple adjusted to
+ the desired ABI. For example, if the test suite is running with the
+ ``i686-pc-win32`` target, ``%itanium_abi_triple`` will expand to
+ ``i686-pc-mingw32``. This allows a test to run with a specific ABI without
+ constraining it to a specific triple.
-``shlibext`` (``%shlibext``)
- The suffix for the host platforms shared library (DLL) files. This
- includes the period as the first character.
+To add more substituations, look at ``test/lit.cfg`` or ``lit.local.cfg``.
+
+
+Options
+-------
+
+The llvm lit configuration allows to customize some things with user options:
+
+``llc``, ``opt``, ...
+ Substitute the respective llvm tool name with a custom command line. This
+ allows to specify custom paths and default arguments for these tools.
+ Example:
+
+ % llvm-lit "-Dllc=llc -verify-machineinstrs"
+
+``run_long_tests``
+ Enable the execution of long running tests.
+
+``llvm_site_config``
+ Load the specified lit configuration instead of the default one.
-To add more variables, look at ``test/lit.cfg``.
Other Features
--------------
-To make RUN line writing easier, there are several helper scripts and programs
-in the ``llvm/test/Scripts`` directory. This directory is in the PATH
-when running tests, so you can just call these scripts using their name.
-For example:
-
-``ignore``
- This script runs its arguments and then always returns 0. This is useful
- in cases where the test needs to cause a tool to generate an error (e.g.
- to check the error output). However, any program in a pipeline that
- returns a non-zero result will cause the test to fail. This script
- overcomes that issue and nicely documents that the test case is
- purposefully ignoring the result code of the tool
+To make RUN line writing easier, there are several helper programs. These
+helpers are in the PATH when running tests, so you can just call them using
+their name. For example:
+
``not``
- This script runs its arguments and then inverts the result code from it.
+ This program runs its arguments and then inverts the result code from it.
Zero result codes become 1. Non-zero result codes become 0.
Sometimes it is necessary to mark a test case as "expected fail" or
projects / oota-llvm.git / blobdiff