#. Named values are represented as a string of characters with their
prefix. For example, ``%foo``, ``@DivisionByZero``,
``%a.really.long.identifier``. The actual regular expression used is
- '``[%@][a-zA-Z$._][a-zA-Z$._0-9]*``'. Identifiers which require other
+ '``[%@][a-zA-Z$._][a-zA-Z$._0-9]*``'. Identifiers that require other
characters in their names can be surrounded with quotes. Special
characters may be escaped using ``"\xx"`` where ``xx`` is the ASCII
code for the character in hexadecimal. In this way, any character can
- be used in a name value, even quotes themselves.
+ be used in a name value, even quotes themselves. The ``"\01"`` prefix
+ can be used on global variables to suppress mangling.
#. Unnamed values are represented as an unsigned numeric value with
their prefix. For example, ``%12``, ``@2``, ``%44``.
#. Constants, which are described in the section Constants_ below.
#. Unnamed temporaries are created when the result of a computation is
not assigned to a named value.
#. Unnamed temporaries are numbered sequentially (using a per-function
- incrementing counter, starting with 0). Note that basic blocks are
- included in this numbering. For example, if the entry basic block is not
- given a label name, then it will get number 0.
+ incrementing counter, starting with 0). Note that basic blocks and unnamed
+ function parameters are included in this numbering. For example, if the
+ entry basic block is not given a label name and all function parameters are
+ named, then it will get number 0.
It also shows a convention that we follow in this document. When
demonstrating instructions, we will follow an instruction with a comment
}
; Named metadata
- !1 = metadata !{i32 42}
- !foo = !{!1, null}
+ !0 = metadata !{i32 42, null, metadata !"string"}
+ !foo = !{!0}
This example is made up of a :ref:`global variable <globalvars>` named
"``.str``", an external declaration of the "``puts``" function, a
LLVM IR allows you to specify both "identified" and "literal" :ref:`structure
types <t_struct>`. Literal types are uniqued structurally, but identified types
are never uniqued. An :ref:`opaque structural type <t_opaque>` can also be used
-to forward declare a type which is not yet available.
+to forward declare a type that is not yet available.
An example of a identified structure specification is:
[unnamed_addr] [fn Attrs] [section "name"] [comdat $<ComdatName>]
[align N] [gc] [prefix Constant] { ... }
+The argument list is a comma seperated sequence of arguments where each
+argument is of the following form
+
+Syntax::
+
+ <type> [parameter Attrs] [name]
+
+
.. _langref_aliases:
Aliases
Syntax::
- @<Name> = [
Visibility] [DLLStorageClass] [ThreadLocal] [unnamed_addr] alias [Linkage] <AliaseeTy> @<Aliasee>
+ @<Name> = [
Linkage] [Visibility] [DLLStorageClass] [ThreadLocal] [unnamed_addr] alias <AliaseeTy> @<Aliasee>
The linkage must be one of ``private``, ``internal``, ``linkonce``, ``weak``,
``linkonce_odr``, ``weak_odr``, ``external``. Note that some system linkers
Comdat IR provides access to COFF and ELF object file COMDAT functionality.
-Comdats have a name which represents the COMDAT key. All global objects which
+Comdats have a name which represents the COMDAT key. All global objects that
specify this key will only end up in the final object file if the linker chooses
that key over some other key. Aliases are placed in the same COMDAT that their
aliasee computes to, if any.
``IMAGE_COMDAT_SELECT_LARGEST`` containing the contents of the ``@foo`` symbol
and another COMDAT section with selection kind
``IMAGE_COMDAT_SELECT_ASSOCIATIVE`` which is associated with the first COMDAT
-section and contains the contents of the ``@baz`` symbol.
+section and contains the contents of the ``@bar`` symbol.
There are some restrictions on the properties of the global object.
It, or an alias to it, must have the same name as the COMDAT group when
address of outgoing stack arguments. An ``inalloca`` argument must
be a pointer to stack memory produced by an ``alloca`` instruction.
The alloca, or argument allocation, must also be tagged with the
- inalloca keyword. Only the past argument may have the ``inalloca``
+ inalloca keyword. Only the last argument may have the ``inalloca``
attribute, and that argument is guaranteed to be passed in memory.
An argument allocation may be used by a call at most once because
the first parameter. This is not a valid attribute for return
values.
+``align <n>``
+ This indicates that the pointer value may be assumed by the optimizer to
+ have the specified alignment.
+
+ Note that this attribute has additional semantics when combined with the
+ ``byval`` attribute.
+
.. _noalias:
``noalias``
This indicates that pointer values :ref:`based <pointeraliasing>` on
- the argument or return value do not alias pointer values which are
+ the argument or return value do not alias pointer values that are
not *based* on it, ignoring certain "irrelevant" dependencies. For a
call to the parent function, dependencies between memory references
from before or after the call and from those during the call are
passed in is non-null, or the callee must ensure that the returned pointer
is non-null.
+``dereferenceable(<n>)``
+ This indicates that the parameter or return pointer is dereferenceable. This
+ attribute may only be applied to pointer typed parameters. A pointer that
+ is dereferenceable can be loaded from speculatively without a risk of
+ trapping. The number of bytes known to be dereferenceable must be provided
+ in parentheses. It is legal for the number of bytes to be less than the
+ size of the pointee type. The ``nonnull`` attribute does not imply
+ dereferenceability (consider a pointer to one element past the end of an
+ array), however ``dereferenceable(<n>)`` does imply ``nonnull`` in
+ ``addrspace(0)`` (which is the default address space).
+
.. _gc:
Garbage Collector Names
define void @f() gc "name" { ... }
The compiler declares the supported values of *name*. Specifying a
-collector which will cause the compiler to alter its output in order to
+collector will cause the compiler to alter its output in order to
support the named garbage collection algorithm.
.. _prefixdata:
This indicates that the callee function at a call site should be
recognized as a built-in function, even though the function's declaration
uses the ``nobuiltin`` attribute. This is only valid at call sites for
- direct calls to functions which are declared with the ``nobuiltin``
+ direct calls to functions that are declared with the ``nobuiltin``
attribute.
``cold``
This attribute indicates that this function is rarely called. When
- If R is volatile, the result is target-dependent. (Volatile is
supposed to give guarantees which can support ``sig_atomic_t`` in
- C/C++, and may be used for accesses to addresses which do not behave
+ C/C++, and may be used for accesses to addresses that do not behave
like normal memory. It does not generally provide cross-thread
synchronization.)
- Otherwise, if there is no write to the same byte that happens before
address. This corresponds to the C++0x/C1x ``memory_order_acq_rel``.
``seq_cst`` (sequentially consistent)
In addition to the guarantees of ``acq_rel`` (``acquire`` for an
- operation which only reads, ``release`` for an operation which only
+ operation that only reads, ``release`` for an operation that only
writes), there is a global total order on all
sequentially-consistent operations on all addresses, which is
consistent with the *happens-before* partial order and with the
dramatically change results in floating point (e.g. reassociate). This
flag implies all the others.
+.. _uselistorder:
+
+Use-list Order Directives
+-------------------------
+
+Use-list directives encode the in-memory order of each use-list, allowing the
+order to be recreated. ``<order-indexes>`` is a comma-separated list of
+indexes that are assigned to the referenced value's uses. The referenced
+value's use-list is immediately sorted by these indexes.
+
+Use-list directives may appear at function scope or global scope. They are not
+instructions, and have no effect on the semantics of the IR. When they're at
+function scope, they must appear after the terminator of the final basic block.
+
+If basic blocks have their address taken via ``blockaddress()`` expressions,
+``uselistorder_bb`` can be used to reorder their use-lists from outside their
+function's scope.
+
+:Syntax:
+
+::
+
+ uselistorder <ty> <value>, { <order-indexes> }
+ uselistorder_bb @function, %block { <order-indexes> }
+
+:Examples:
+
+::
+
+ define void @foo(i32 %arg1, i32 %arg2) {
+ entry:
+ ; ... instructions ...
+ bb:
+ ; ... instructions ...
+
+ ; At function scope.
+ uselistorder i32 %arg1, { 1, 0, 2 }
+ uselistorder label %bb, { 1, 0 }
+ }
+
+ ; At global scope.
+ uselistorder i32* @global, { 1, 2, 0 }
+ uselistorder i32 7, { 1, 0 }
+ uselistorder i32 (i32) @bar, { 1, 0 }
+ uselistorder_bb @foo, %bb, { 5, 1, 3, 2, 0, 4 }
+
.. _typesystem:
Type System
< <# elements> x <elementtype> >
The number of elements is a constant integer value larger than 0;
-elementtype may be any integer or floating point type, or a pointer to
-these types. Vectors of size zero are not allowed.
+elementtype may be any integer, floating point or pointer type. Vectors
+of size zero are not allowed.
:Examples:
square brackets (``[]``)). For example:
"``[ i32 42, i32 11, i32 74 ]``". Array constants must have
:ref:`array type <t_array>`, and the number and types of elements must
- match those specified by the type.
+ match those specified by the type. As a special case, character array
+ constants may also be represented as a double-quoted string using the ``c``
+ prefix. For example: "``c"Hello World\0A\00"``".
**Vector constants**
Vector constants are represented with notation similar to vector
type definitions (a comma separated list of elements, surrounded by
%C = xor %B, %B
%D = undef
- %E = icmp lt %D, 4
+ %E = icmp slt %D, 4
%F = icmp gte %D, 4
Safe:
Poison values are similar to :ref:`undef values <undefvalues>`, however
they also represent the fact that an instruction or constant expression
-which cannot evoke side effects has nevertheless detected a condition
-which results in undefined behavior.
+that cannot evoke side effects has nevertheless detected a condition
+that results in undefined behavior.
There is currently no way of representing a poison value in the IR; they
only exist when produced by operations such as :ref:`add <i_add>` with
successor.
- Dependence is transitive.
-Poison Values have the same behavior as :ref:`undef values <undefvalues>`,
-with the additional affect that any instruction which has a *dependence*
+Poison values have the same behavior as :ref:`undef values <undefvalues>`,
+with the additional effect that any instruction that has a *dependence*
on a poison value has undefined behavior.
Here are some examples:
4 byte gap between the two fields. This gap represents padding which
does not carry useful data and need not be preserved.
+'``noalias``' and '``alias.scope``' Metadata
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+``noalias`` and ``alias.scope`` metadata provide the ability to specify generic
+noalias memory-access sets. This means that some collection of memory access
+instructions (loads, stores, memory-accessing calls, etc.) that carry
+``noalias`` metadata can specifically be specified not to alias with some other
+collection of memory access instructions that carry ``alias.scope`` metadata.
+Each type of metadata specifies a list of scopes where each scope has an id and
+a domain. When evaluating an aliasing query, if for some some domain, the set
+of scopes with that domain in one instruction's ``alias.scope`` list is a
+subset of (or qual to) the set of scopes for that domain in another
+instruction's ``noalias`` list, then the two memory accesses are assumed not to
+alias.
+
+The metadata identifying each domain is itself a list containing one or two
+entries. The first entry is the name of the domain. Note that if the name is a
+string then it can be combined accross functions and translation units. A
+self-reference can be used to create globally unique domain names. A
+descriptive string may optionally be provided as a second list entry.
+
+The metadata identifying each scope is also itself a list containing two or
+three entries. The first entry is the name of the scope. Note that if the name
+is a string then it can be combined accross functions and translation units. A
+self-reference can be used to create globally unique scope names. A metadata
+reference to the scope's domain is the second entry. A descriptive string may
+optionally be provided as a third list entry.
+
+For example,
+
+.. code-block:: llvm
+
+ ; Two scope domains:
+ !0 = metadata !{metadata !0}
+ !1 = metadata !{metadata !1}
+
+ ; Some scopes in these domains:
+ !2 = metadata !{metadata !2, metadata !0}
+ !3 = metadata !{metadata !3, metadata !0}
+ !4 = metadata !{metadata !4, metadata !1}
+
+ ; Some scope lists:
+ !5 = metadata !{metadata !4} ; A list containing only scope !4
+ !6 = metadata !{metadata !4, metadata !3, metadata !2}
+ !7 = metadata !{metadata !3}
+
+ ; These two instructions don't alias:
+ %0 = load float* %c, align 4, !alias.scope !5
+ store float %0, float* %arrayidx.i, align 4, !noalias !5
+
+ ; These two instructions also don't alias (for domain !1, the set of scopes
+ ; in the !alias.scope equals that in the !noalias list):
+ %2 = load float* %c, align 4, !alias.scope !5
+ store float %2, float* %arrayidx.i2, align 4, !noalias !6
+
+ ; These two instructions don't alias (for domain !0, the set of scopes in
+ ; the !noalias list is not a superset of, or equal to, the scopes in the
+ ; !alias.scope list):
+ %2 = load float* %c, align 4, !alias.scope !6
+ store float %0, float* %arrayidx.i, align 4, !noalias !7
+
'``fpmath``' Metadata
^^^^^^^^^^^^^^^^^^^^^
!0 = metadata !{ metadata !0 }
!1 = metadata !{ metadata !1 }
-The loop identifier metadata can be used to specify additional per-loop
-metadata. Any operands after the first operand can be treated as user-defined
-metadata. For example the ``llvm.loop.vectorize.unroll`` metadata is understood
-by the loop vectorizer to indicate how many times to unroll the loop:
+The loop identifier metadata can be used to specify additional
+per-loop metadata. Any operands after the first operand can be treated
+as user-defined metadata. For example the ``llvm.loop.unroll.count``
+suggests an unroll factor to the loop unroller:
.. code-block:: llvm
br i1 %exitcond, label %._crit_edge, label %.lr.ph, !llvm.loop !0
...
!0 = metadata !{ metadata !0, metadata !1 }
- !1 = metadata !{ metadata !"llvm.loop.vectorize.unroll", i32 2 }
+ !1 = metadata !{ metadata !"llvm.loop.unroll.count", i32 4 }
+
+'``llvm.loop.vectorize``' and '``llvm.loop.interleave``'
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Metadata prefixed with ``llvm.loop.vectorize`` or ``llvm.loop.interleave`` are
+used to control per-loop vectorization and interleaving parameters such as
+vectorization width and interleave count. These metadata should be used in
+conjunction with ``llvm.loop`` loop identification metadata. The
+``llvm.loop.vectorize`` and ``llvm.loop.interleave`` metadata are only
+optimization hints and the optimizer will only interleave and vectorize loops if
+it believes it is safe to do so. The ``llvm.mem.parallel_loop_access`` metadata
+which contains information about loop-carried memory dependencies can be helpful
+in determining the safety of these transformations.
+
+'``llvm.loop.interleave.count``' Metadata
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+This metadata suggests an interleave count to the loop interleaver.
+The first operand is the string ``llvm.loop.interleave.count`` and the
+second operand is an integer specifying the interleave count. For
+example:
+
+.. code-block:: llvm
+
+ !0 = metadata !{ metadata !"llvm.loop.interleave.count", i32 4 }
+
+Note that setting ``llvm.loop.interleave.count`` to 1 disables interleaving
+multiple iterations of the loop. If ``llvm.loop.interleave.count`` is set to 0
+then the interleave count will be determined automatically.
+
+'``llvm.loop.vectorize.enable``' Metadata
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+This metadata selectively enables or disables vectorization for the loop. The
+first operand is the string ``llvm.loop.vectorize.enable`` and the second operand
+is a bit. If the bit operand value is 1 vectorization is enabled. A value of
+0 disables vectorization:
+
+.. code-block:: llvm
+
+ !0 = metadata !{ metadata !"llvm.loop.vectorize.enable", i1 0 }
+ !1 = metadata !{ metadata !"llvm.loop.vectorize.enable", i1 1 }
+
+'``llvm.loop.vectorize.width``' Metadata
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+This metadata sets the target width of the vectorizer. The first
+operand is the string ``llvm.loop.vectorize.width`` and the second
+operand is an integer specifying the width. For example:
+
+.. code-block:: llvm
+
+ !0 = metadata !{ metadata !"llvm.loop.vectorize.width", i32 4 }
+
+Note that setting ``llvm.loop.vectorize.width`` to 1 disables
+vectorization of the loop. If ``llvm.loop.vectorize.width`` is set to
+0 or if the loop does not have this metadata the width will be
+determined automatically.
+
+'``llvm.loop.unroll``'
+^^^^^^^^^^^^^^^^^^^^^^
+
+Metadata prefixed with ``llvm.loop.unroll`` are loop unrolling
+optimization hints such as the unroll factor. ``llvm.loop.unroll``
+metadata should be used in conjunction with ``llvm.loop`` loop
+identification metadata. The ``llvm.loop.unroll`` metadata are only
+optimization hints and the unrolling will only be performed if the
+optimizer believes it is safe to do so.
+
+'``llvm.loop.unroll.count``' Metadata
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+This metadata suggests an unroll factor to the loop unroller. The
+first operand is the string ``llvm.loop.unroll.count`` and the second
+operand is a positive integer specifying the unroll factor. For
+example:
+
+.. code-block:: llvm
+
+ !0 = metadata !{ metadata !"llvm.loop.unroll.count", i32 4 }
+
+If the trip count of the loop is less than the unroll count the loop
+will be partially unrolled.
+
+'``llvm.loop.unroll.disable``' Metadata
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+This metadata either disables loop unrolling. The metadata has a single operand
+which is the string ``llvm.loop.unroll.disable``. For example:
+
+.. code-block:: llvm
+
+ !0 = metadata !{ metadata !"llvm.loop.unroll.disable" }
+
+'``llvm.loop.unroll.full``' Metadata
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+This metadata either suggests that the loop should be unrolled fully. The
+metadata has a single operand which is the string ``llvm.loop.unroll.disable``.
+For example:
+
+.. code-block:: llvm
+
+ !0 = metadata !{ metadata !"llvm.loop.unroll.full" }
'``llvm.mem``'
^^^^^^^^^^^^^^^
!1 = metadata !{ metadata !1 } ; an identifier for the inner loop
!2 = metadata !{ metadata !2 } ; an identifier for the outer loop
-'``llvm.loop.vectorize``'
-^^^^^^^^^^^^^^^^^^^^^^^^^
-
-Metadata prefixed with ``llvm.loop.vectorize`` is used to control per-loop
-vectorization parameters such as vectorization factor and unroll factor.
-
-``llvm.loop.vectorize`` metadata should be used in conjunction with
-``llvm.loop`` loop identification metadata.
-
-'``llvm.loop.vectorize.unroll``' Metadata
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-This metadata instructs the loop vectorizer to unroll the specified
-loop exactly ``N`` times.
-
-The first operand is the string ``llvm.loop.vectorize.unroll`` and the second
-operand is an integer specifying the unroll factor. For example:
-
-.. code-block:: llvm
-
- !0 = metadata !{ metadata !"llvm.loop.vectorize.unroll", i32 4 }
-
-Note that setting ``llvm.loop.vectorize.unroll`` to 1 disables
-unrolling of the loop.
-
-If ``llvm.loop.vectorize.unroll`` is set to 0 then the amount of
-unrolling will be determined automatically.
-
-'``llvm.loop.vectorize.width``' Metadata
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-This metadata sets the target width of the vectorizer to ``N``. Without
-this metadata, the vectorizer will choose a width automatically.
-Regardless of this metadata, the vectorizer will only vectorize loops if
-it believes it is valid to do so.
-
-The first operand is the string ``llvm.loop.vectorize.width`` and the
-second operand is an integer specifying the width. For example:
-
-.. code-block:: llvm
-
- !0 = metadata !{ metadata !"llvm.loop.vectorize.width", i32 4 }
-
-Note that setting ``llvm.loop.vectorize.width`` to 1 disables
-vectorization of the loop.
-
-If ``llvm.loop.vectorize.width`` is set to 0 then the width will be
-determined automatically.
-
Module Flags Metadata
=====================
%agg1 = insertvalue {i32, float} undef, i32 1, 0 ; yields {i32 1, float undef}
%agg2 = insertvalue {i32, float} %agg1, float %val, 1 ; yields {i32 1, float %val}
- %agg3 = insertvalue {i32, {float}} %agg1, float %val, 1, 0 ; yields {i32 1, float %val}
+ %agg3 = insertvalue {i32, {float}} undef, float %val, 1, 0 ; yields {i32 undef, {float %val}}
.. _memoryops:
::
- <result> = load [volatile] <ty>* <pointer>[, align <alignment>][, !nontemporal !<index>][, !invariant.load !<index>]
+ <result> = load [volatile] <ty>* <pointer>[, align <alignment>][, !nontemporal !<index>][, !invariant.load !<index>][, !nonnull !<index>]
<result> = load atomic [volatile] <ty>* <pointer> [singlethread] <ordering>, align <alignment>
!<index> = !{ i32 1 }
execution. The optimizer may then move this load around, for example, by
hoisting it out of loops using loop invariant code motion.
+The optional ``!nonnull`` metadata must reference a single
+metadata name ``<index>`` corresponding to a metadata node with no
+entries. The existence of the ``!nonnull`` metadata on the
+instruction tells the optimizer that the value loaded is known to
+never be null. This is analogous to the ''nonnull'' attribute
+on parameters and return values. This metadata can only be applied
+to loads of a pointer type.
+
Semantics:
""""""""""
- The calling conventions of the caller and callee must match.
- All ABI-impacting function attributes, such as sret, byval, inreg,
returned, and inalloca, must match.
+ - The callee must be varargs iff the caller is varargs. Bitcasting a
+ non-varargs function to the appropriate varargs type is legal so
+ long as the non-varargs prefixes obey the other rules.
Tail call optimization for calls marked ``tail`` is guaranteed to occur if
the following conditions are met:
declare float @llvm.fabs.f32(float %Val)
declare double @llvm.fabs.f64(double %Val)
- declare x86_fp80 @llvm.fabs.f80(x86_fp80 %Val)
+ declare x86_fp80 @llvm.fabs.f80(x86_fp80 %Val)
declare fp128 @llvm.fabs.f128(fp128 %Val)
- declare ppc_fp128 @llvm.fabs.ppcf128(ppc_fp128 %Val)
+ declare ppc_fp128 @llvm.fabs.ppcf128(ppc_fp128 %Val)
Overview:
"""""""""
This function returns the same values as the libm ``fabs`` functions
would, and handles error conditions in the same way.
+'``llvm.minnum.*``' Intrinsic
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Syntax:
+"""""""
+
+This is an overloaded intrinsic. You can use ``llvm.minnum`` on any
+floating point or vector of floating point type. Not all targets support
+all types however.
+
+::
+
+ declare float @llvm.minnum.f32(float %Val0, float %Val1)
+ declare double @llvm.minnum.f64(double %Val0, double %Val1)
+ declare x86_fp80 @llvm.minnum.f80(x86_fp80 %Val0, x86_fp80 %Val1)
+ declare fp128 @llvm.minnum.f128(fp128 %Val0, fp128 %Val1)
+ declare ppc_fp128 @llvm.minnum.ppcf128(ppc_fp128 %Val0, ppc_fp128 %Val1)
+
+Overview:
+"""""""""
+
+The '``llvm.minnum.*``' intrinsics return the minimum of the two
+arguments.
+
+
+Arguments:
+""""""""""
+
+The arguments and return value are floating point numbers of the same
+type.
+
+Semantics:
+""""""""""
+
+Follows the IEEE-754 semantics for minNum, which also match for libm's
+fmin.
+
+If either operand is a NaN, returns the other non-NaN operand. Returns
+NaN only if both operands are NaN. If the operands compare equal,
+returns a value that compares equal to both operands. This means that
+fmin(+/-0.0, +/-0.0) could return either -0.0 or 0.0.
+
+'``llvm.maxnum.*``' Intrinsic
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Syntax:
+"""""""
+
+This is an overloaded intrinsic. You can use ``llvm.maxnum`` on any
+floating point or vector of floating point type. Not all targets support
+all types however.
+
+::
+
+ declare float @llvm.maxnum.f32(float %Val0, float %Val1l)
+ declare double @llvm.maxnum.f64(double %Val0, double %Val1)
+ declare x86_fp80 @llvm.maxnum.f80(x86_fp80 %Val0, x86_fp80 %Val1)
+ declare fp128 @llvm.maxnum.f128(fp128 %Val0, fp128 %Val1)
+ declare ppc_fp128 @llvm.maxnum.ppcf128(ppc_fp128 %Val0, ppc_fp128 %Val1)
+
+Overview:
+"""""""""
+
+The '``llvm.maxnum.*``' intrinsics return the maximum of the two
+arguments.
+
+
+Arguments:
+""""""""""
+
+The arguments and return value are floating point numbers of the same
+type.
+
+Semantics:
+""""""""""
+Follows the IEEE-754 semantics for maxNum, which also match for libm's
+fmax.
+
+If either operand is a NaN, returns the other non-NaN operand. Returns
+NaN only if both operands are NaN. If the operands compare equal,
+returns a value that compares equal to both operands. This means that
+fmax(+/-0.0, +/-0.0) could return either -0.0 or 0.0.
+
'``llvm.copysign.*``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
::
- declare i16 @llvm.convert.to.fp16(float %a)
+ declare i16 @llvm.convert.to.fp16.f32(float %a)
+ declare i16 @llvm.convert.to.fp16.f64(double %a)
Overview:
"""""""""
-The '``llvm.convert.to.fp16``' intrinsic function performs a conversion
-from single precision floating point format to half precision floating
-point format.
+The '``llvm.convert.to.fp16``' intrinsic function performs a conversion from a
+conventional floating point type to half precision floating point format.
Arguments:
""""""""""
Semantics:
""""""""""
-The '``llvm.convert.to.fp16``' intrinsic function performs a conversion
-from single precision floating point format to half precision floating
-point format. The return value is an ``i16`` which contains the
-converted number.
+The '``llvm.convert.to.fp16``' intrinsic function performs a conversion from a
+conventional floating point format to half precision floating point format. The
+return value is an ``i16`` which contains the converted number.
Examples:
"""""""""
.. code-block:: llvm
- %res = call i16 @llvm.convert.to.fp16(float %a)
+ %res = call i16 @llvm.convert.to.fp16.f32(float %a)
store i16 %res, i16* @x, align 2
.. _int_convert_from_fp16:
::
- declare float @llvm.convert.from.fp16(i16 %a)
+ declare float @llvm.convert.from.fp16.f32(i16 %a)
+ declare double @llvm.convert.from.fp16.f64(i16 %a)
Overview:
"""""""""
This intrinsic is lowered to the ``val``.
+'``llvm.assume``' Intrinsic
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Syntax:
+"""""""
+
+::
+
+ declare void @llvm.assume(i1 %cond)
+
+Overview:
+"""""""""
+
+The ``llvm.assume`` allows the optimizer to assume that the provided
+condition is true. This information can then be used in simplifying other parts
+of the code.
+
+Arguments:
+""""""""""
+
+The condition which the optimizer may assume is always true.
+
+Semantics:
+""""""""""
+
+The intrinsic allows the optimizer to assume that the provided condition is
+always true whenever the control flow reaches the intrinsic call. No code is
+generated for this intrinsic, and instructions that contribute only to the
+provided condition are not used for code generation. If the condition is
+violated during execution, the behavior is undefined.
+
+Please note that optimizer might limit the transformations performed on values
+used by the ``llvm.assume`` intrinsic in order to preserve the instructions
+only used to form the intrinsic's input argument. This might prove undesirable
+if the extra information provided by the ``llvm.assume`` intrinsic does cause
+sufficient overall improvement in code quality. For this reason,
+``llvm.assume`` should not be used to document basic mathematical invariants
+that the optimizer can otherwise deduce or facts that are of little use to the
+optimizer.
+
'``llvm.donothing``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Overview:
"""""""""
-The ``llvm.donothing`` intrinsic doesn't perform any operation. It's the
-only intrinsic that can be called with an invoke instruction.
+The ``llvm.donothing`` intrinsic doesn't perform any operation. It's one of only
+two intrinsics (besides ``llvm.experimental.patchpoint``) that can be called
+with an invoke instruction.
Arguments:
""""""""""
projects / oota-llvm.git / blobdiff