<li>Read the documentation.</li>
<li>Read the documentation.</li>
<li>Remember that you were warned twice about reading the documentation.</li>
- <li>Install the llvm-gcc4.0 (or llvm-gcc4.2) front end if you intend to compile C or C++:
+ <li>Install the llvm-gcc-4.2 front end if you intend to compile C or C++:
<ol>
<li><tt>cd <i>where-you-want-the-C-front-end-to-live</i></tt></li>
- <li><tt>gunzip --stdout llvm-gcc.<i>platform</i>.tar.gz | tar -xvf -</tt>
+ <li><tt>gunzip --stdout llvm-gcc-4.2-<i>version</i>-<i>platform</i>.tar.gz | tar -xvf -</tt>
</li>
- <ul><li>If the binary extension is ".bz" use bunzip2 instead of gunzip.</li>
- </ul>
+ <li>Note: If the binary extension is ".bz" use bunzip2 instead of gunzip.</li>
<li>Add llvm-gcc's "bin" directory to your PATH variable.</li>
</ol></li>
<li><tt>--with-llvmgccdir=<i>directory</i></tt>
<p>Optionally, specify for <i>directory</i> the full pathname of the
C/C++ front end installation to use with this LLVM configuration. If
- not specified, the PATH will be searched.</p></li>
+ not specified, the PATH will be searched. This is only needed if you
+ want to run the testsuite or do some special kinds of LLVM builds.</p></li>
<li><tt>--enable-spec2000=<i>directory</i></tt>
<p>Enable the SPEC2000 benchmarks for testing. The SPEC2000
benchmarks should be available in
<th>Arch</th>
<th>Compilers</th>
</tr>
+<tr>
+ <td>AuroraUX</td>
+ <td>x86<sup><a href="#pf_1">1</a></sup></td>
+ <td>GCC</td>
+</tr>
<tr>
<td>Linux</td>
<td>x86<sup><a href="#pf_1">1</a></sup></td>
<td>GCC</td>
</tr>
+<tr>
+ <td>Linux</td>
+ <td>amd64</td>
+ <td>GCC</td>
+</tr>
<tr>
<td>Solaris</td>
<td>V9 (Ultrasparc)</td>
<td>GCC</td>
</tr>
<tr>
- <td>MacOS X<sup><a href="#pf_2">2</a></sup></td>
+ <td>MacOS X<sup><a href="#pf_2">2</a>,<a href="#pf_9">9</a></sup></td>
<td>x86</td>
<td>GCC</td>
-
</tr>
<tr>
<td>Cygwin/Win32</td>
</tr>
<tr>
<td>MinGW/Win32</td>
- <td>x86<sup><a href="#pf_1">1</a>,<a href="#pf_6">6</a>,<a href="#pf_8">8</a></sup></td>
+ <td>x86<sup><a href="#pf_1">1</a>,<a href="#pf_6">6</a>,
+ <a href="#pf_8">8</a>, <a href="#pf_10">10</a></sup></td>
<td>GCC 3.4.X, binutils 2.15</td>
</tr>
-<tr>
- <td>Linux</td>
- <td>amd64<sup><a href="#pf_3">3</a></sup></td>
- <td>GCC</td>
-</tr>
</table>
<p>LLVM has partial support for the following platforms:</p>
<tr>
<td>Windows</td>
<td>x86<sup><a href="#pf_1">1</a></sup></td>
- <td>Visual Studio
.NET<sup><a href="#pf_4">4</a>,<a href="#pf_5">5</a></sup></td>
+ <td>Visual Studio
2005 SP1 or higher<sup><a href="#pf_4">4</a>,<a href="#pf_5">5</a></sup></td>
<tr>
<td>AIX<sup><a href="#pf_3">3</a>,<a href="#pf_4">4</a></sup></td>
<td>PowerPC</td>
up</a></li>
<li><a name="pf_2">Code generation supported for 32-bit ABI only</a></li>
<li><a name="pf_3">No native code generation</a></li>
-<li><a name="pf_4">Build is not complete: one or more tools don't link</a></li>
+<li><a name="pf_4">Build is not complete: one or more tools do not link or function</a></li>
<li><a name="pf_5">The GCC-based C/C++ frontend does not build</a></li>
-<li><a name="pf_6">The port is done using the MSYS shell.</a>
-<a href="http://www.mingw.org/MinGWiki/">Download</a> and install
-bison (excl. M4.exe) and flex in that order. Build binutils-2.15 from source,
-if necessary. Bison & flex can be also grabbed from GNUWin32 sf.net
-project.</li>
+<li><a name="pf_6">The port is done using the MSYS shell.</a></li>
<li><a name="pf_7">Native code generation exists but is not complete.</a></li>
<li><a name="pf_8">Binutils</a> up to post-2.17 has bug in bfd/cofflink.c
preventing LLVM from building correctly. Several workarounds have been
future. We highly recommend that you rebuild your current binutils with the
patch from <a href="http://sourceware.org/bugzilla/show_bug.cgi?id=2659">
Binutils bugzilla</a>, if it wasn't already applied.</li>
+<li><a name="pf_9">XCode 2.5 and gcc 4.0.1</a> (Apple Build 5370) will trip
+ internal LLVM assert messages when compiled for Release at optimization
+ levels greater than 0 (i.e., <i>"-O1"</i> and higher).
+ Add <i>OPTIMIZE_OPTION="-O0"</i> to the build command line
+ if compiling for LLVM Release or bootstrapping the LLVM toolchain.</li>
+<li><a name="pf_10">For MSYS/MinGW on Windows, be sure to install the MSYS
+ version of the perl package, and be sure it appears in your path
+ before any Windows-based versions such as Strawberry Perl and
+ ActivePerl, as these have Windows-specifics that will cause the
+ build to fail.</a></li>
</ol>
</div>
<p>Note that you will need about 1-3 GB of space for a full LLVM build in Debug
mode, depending on the system (it is so large because of all the debugging
information and the fact that the libraries are statically linked into multiple
-tools). If you do not need many of the tools and you are space-conscious,
-you can disable them individually in <tt>llvm/tools/Makefile</tt>. The Release
-build requires considerably less space.</p>
+tools). If you do not need many of the tools and you are space-conscious, you
+can pass <tt>ONLY_TOOLS="tools you need"</tt> to make. The Release build
+requires considerably less space.</p>
<p>The LLVM suite <i>may</i> compile on other platforms, but it is not
guaranteed to do so. If compilation is successful, the LLVM utilities should be
<p>The GCC front end is not very portable at the moment. If you want to get it
to work on another platform, you can download a copy of the source and <a
-href="CFEBuildInstrs.html">try to compile it</a> on your platform.</p>
+href="GCCFEBuildInstrs.html">try to compile it</a> on your platform.</p>
</div>
<td>For building the CFE</td>
</tr>
- <tr>
- <td><a href="http://www.gnu.org/software/flex">Flex</a></td>
- <td>2.5.4</td>
- <td>LEX compiler</td>
- </tr>
-
- <tr>
- <td><a href="http://www.gnu.org/software/bison/bison.html">Bison</a></td>
- <td>1.28, 1.35, 1.75, 1.875d, 2.0, or 2.1<br>(not 1.85 or 1.875)</td>
- <td>YACC compiler</td>
- </tr>
-
<tr>
<td><a href="http://subversion.tigris.org/project_packages.html">SVN</a></td>
<td>≥1.3</td>
problems in the STL that effectively prevent it from compiling LLVM.
</p>
-<p><b>GCC 3.2.2</b>: This version of GCC fails to compile LLVM.</p>
+<p><b>GCC 3.2.2 and 3.2.3</b>: These versions of GCC fails to compile LLVM with
+a bogus template error. This was fixed in later GCCs.</p>
<p><b>GCC 3.3.2</b>: This version of GCC suffered from a <a
href="http://gcc.gnu.org/PR13392">serious bug</a> which causes it to crash in
the "<tt>convert_from_eh_region_ranges_1</tt>" GCC function.</p>
<p><b>Cygwin GCC 3.3.3</b>: The version of GCC 3.3.3 commonly shipped with
- Cygwin does not work. Please <a href="CFEBuildInstrs.html#cygwin">upgrade
+ Cygwin does not work. Please <a href="GCCFEBuildInstrs.html#cygwin">upgrade
to a newer version</a> if possible.</p>
<p><b>SuSE GCC 3.3.3</b>: The version of GCC 3.3.3 shipped with SuSE 9.1 (and
possibly others) does not compile LLVM correctly (it appears that exception
portions of its testsuite.</p>
<p><b>GCC 4.1.2 on OpenSUSE</b>: Seg faults during libstdc++ build and on x86_64
platforms compiling md5.c gets a mangled constant.</p>
+<p><b>GCC 4.1.2 (20061115 (prerelease) (Debian 4.1.1-21)) on Debian</b>: Appears
+to miscompile parts of LLVM 2.4. One symptom is ValueSymbolTable complaining
+about symbols remaining in the table on destruction.</p>
+<p><b>GCC 4.1.2 20071124 (Red Hat 4.1.2-42)</b>: Suffers from the same symptoms
+as the previous one. It appears to work with ENABLE_OPTIMIZED=0 (the default).</p>
+<p><b>Cygwin GCC 4.3.2 20080827 (beta) 2</b>:
+ Users <a href="http://llvm.org/PR4145">reported</a> various problems related
+ with link errors when using this GCC version.</p>
+<p><b>GCC 4.3.3 (Debian 4.3.3-10) on ARM</b>: Miscompiles parts of LLVM 2.6
+when optimizations are turned on. The symptom is an infinite loop in
+FoldingSetImpl::RemoveNode while running the code generator.
<p><b>GNU ld 2.16.X</b>. Some 2.16.X versions of the ld linker will produce very
long warning messages complaining that some ".gnu.linkonce.t.*" symbol was
defined in a discarded section. You can safely ignore these messages as they are
causes huge link times (minutes instead of seconds) when building LLVM. We
recommend upgrading to a newer version (2.17.50.0.4 or later).</p>
+<p><b>GNU Binutils 2.19.1 Gold</b>: This version of Gold contained
+<a href="http://sourceware.org/bugzilla/show_bug.cgi?id=9836">a bug</a>
+which causes intermittent failures when building LLVM with position independent
+code. The symptom is an error about cyclic dependencies. We recommend
+upgrading to a newer version of Gold.</p>
+
</div>
<p>The files are as follows, with <em>x.y</em> marking the version number:
<dl>
<dt><tt>llvm-x.y.tar.gz</tt></dt>
- <dd>Source release for the LLVM libraries and tools.<br/></dd>
+ <dd>Source release for the LLVM libraries and tools.<br></dd>
<dt><tt>llvm-test-x.y.tar.gz</tt></dt>
<dd>Source release for the LLVM test suite.</dd>
- <dt><tt>llvm-gcc4-x.y.source.tar.gz</tt></dt>
- <dd>Source release of the llvm-gcc4 front end. See README.LLVM in the root
- directory for build instructions.<br/></dd>
+ <dt><tt>llvm-gcc-4.2-x.y.source.tar.gz</tt></dt>
+ <dd>Source release of the llvm-gcc-4.2 front end. See README.LLVM in the root
+ directory for build instructions.<br></dd>
- <dt><tt>llvm-gcc4-x.y-platform.tar.gz</tt></dt>
- <dd>Binary release of the llvm-gcc4 front end for a specific platform.<br/></dd>
+ <dt><tt>llvm-gcc-4.2-x.y-platform.tar.gz</tt></dt>
+ <dd>Binary release of the llvm-gcc-4.2 front end for a specific platform.<br></dd>
</dl>
-<p>It is also possible to download the sources of the llvm-gcc4 front end from a
-read-only subversion mirror at
-svn://anonsvn.opensource.apple.com/svn/llvm/trunk. </p>
-
</div>
<!-- ======================================================================= -->
<div class="doc_text">
<p>If you have access to our Subversion repository, you can get a fresh copy of
-the entire source code. All you need to do is check it out from Subvresion as
+the entire source code. All you need to do is check it out from Subversion as
follows:</p>
<ul>
<p>If you want to get a specific release (as opposed to the most recent
revision), you can checkout it from the '<tt>tags</tt>' directory (instead of
'<tt>trunk</tt>'). The following releases are located in the following
- subdirectories of the '<tt>tags</tt>' directory:</p>
+subdirectories of the '<tt>tags</tt>' directory:</p>
<ul>
+<li>Release 2.5: <b>RELEASE_25</b></li>
+<li>Release 2.4: <b>RELEASE_24</b></li>
+<li>Release 2.3: <b>RELEASE_23</b></li>
<li>Release 2.2: <b>RELEASE_22</b></li>
<li>Release 2.1: <b>RELEASE_21</b></li>
<li>Release 2.0: <b>RELEASE_20</b></li>
you run <tt>svn update</tt>.</p>
<p>If you would like to get the GCC front end source code, you can also get it
-and build it yourself. Please follow <a href="CFEBuildInstrs.html">these
+and build it yourself. Please follow <a href="GCCFEBuildInstrs.html">these
instructions</a> to successfully get and build the LLVM GCC front-end.</p>
</div>
<p>Before configuring and compiling the LLVM suite, you can optionally extract the
LLVM GCC front end from the binary distribution. It is used for running the
llvm-test testsuite and for compiling C/C++ programs. Note that you can optionally
-<a href="CFEBuildInstrs.html">build llvm-gcc yourself</a> after building the
+<a href="GCCFEBuildInstrs.html">build llvm-gcc yourself</a> after building the
main LLVM repository.</p>
<p>To install the GCC front end, do the following:</p>
<ol>
<li><tt>cd <i>where-you-want-the-front-end-to-live</i></tt></li>
- <li><tt>gunzip --stdout llvmgcc-<i>version</i>.<i>platform</i>.tar.gz | tar -xvf
+ <li><tt>gunzip --stdout llvm-gcc-4.2-<i>version</i>-<i>platform</i>.tar.gz | tar -xvf
-</tt></li>
</ol>
linked with libraries not available on your system.</p>
<p>In cases like these, you may want to try <a
-href="CFEBuildInstrs.html">building the GCC front end from source.</a> This is
+href="GCCFEBuildInstrs.html">building the GCC front end from source.</a> This is
much easier now than it was in the past.</p>
</div>
will fail as these libraries require llvm-gcc and llvm-g++. See
<a href="#installcf">Install the GCC Front End</a> for details on installing
the C/C++ Front End. See
- <a href="CFEBuildInstrs.html">Bootstrapping the LLVM C/C++ Front-End</a>
+ <a href="GCCFEBuildInstrs.html">Bootstrapping the LLVM C/C++ Front-End</a>
for details on building the C/C++ Front End.</dd>
<dt><i>--with-tclinclude</i></dt>
<dd>Path to the tcl include directory under which <tt>tclsh</tt> can be
</dd>
<dt><i>--enable-optimized</i></dt>
<dd>
- Enables optimized compilation by default (debugging symbols are removed
- and GCC optimization flags are enabled). The default is to use an
- unoptimized build (also known as a debug build).
+ Enables optimized compilation (debugging symbols are removed
+ and GCC optimization flags are enabled). Note that this is the default
+ setting if you are using the LLVM distribution. The default behavior
+ of an Subversion checkout is to use an unoptimized build (also known as a
+ debug build).
<br><br>
</dd>
<dt><i>--enable-debug-runtime</i></dt>
native compiler (no cross-compiler targets available). The "native" target is
selected as the target of the build host. You can also specify a comma
separated list of target names that you want available in llc. The target
- names use all lower case. The current set of targets is: <br/>
+ names use all lower case. The current set of targets is: <br>
<tt>alpha, ia64, powerpc, skeleton, sparc, x86</tt>.
<br><br></dd>
<dt><i>--enable-doxygen</i></dt>
<dl>
<dt>Debug Builds
<dd>
- These builds are the default when one types <tt>gmake</tt> (unless the
- <tt>--enable-optimized</tt> option was used during configuration). The
- build system will compile the tools and libraries with debugging
- information.
+ These builds are the default when one is using an Subversion checkout and
+ types <tt>gmake</tt> (unless the <tt>--enable-optimized</tt> option was
+ used during configuration). The build system will compile the tools and
+ libraries with debugging information. To get a Debug Build using the
+ LLVM distribution the <tt>--disable-optimized</tt> option must be passed
+ to <tt>configure</tt>.
<br><br>
<dt>Release (Optimized) Builds
<tt>gmake</tt> command line. For these builds, the build system will
compile the tools and libraries with GCC optimizations enabled and strip
debugging information from the libraries and executables it generates.
+ Note that Release Builds are default when using an LLVM distribution.
<br><br>
<dt>Profile Builds
<dd>
Perform a Release (Optimized) build without assertions enabled.
<br><br>
+
+ <dt><tt>gmake ENABLE_OPTIMIZED=0</tt>
+ <dd>
+ Perform a Debug build.
+ <br><br>
<dt><tt>gmake ENABLE_PROFILING=1</tt>
<dd>
</div>
<div class="doc_text">
- <p>It is possible to cross-compile LLVM. That is, you can create LLVM
- executables and libraries for a platform different than the one one which you
- are compiling. To do this, a few additional steps are
- required. <sup><a href="#ccn_1">1</a></sup> To cross-compile LLVM, use
- these instructions:</p>
- <ol>
- <li>Configure and build LLVM as a native compiler. You will need
- just <tt>TableGen</tt> from that build.
- <ul>
- <li>If you have <tt>$LLVM_OBJ_ROOT=$LLVM_SRC_ROOT</tt> just execute
- <tt>make -C utils/TableGen</tt> after configuring.</li>
- <li>Otherwise you will need to monitor building process and terminate
- it just after <tt>TableGen</tt> was built.</li>
- </ul>
- </li>
- <li>Copy the TableGen binary to somewhere safe (out of your build tree).
- </li>
- <li>Configure LLVM to build with a cross-compiler. To do this, supply the
- configure script with <tt>--build</tt> and <tt>--host</tt> options that
- are different. The values of these options must be legal target triples
- that your GCC compiler supports.</li>
- <li>Put the saved <tt>TableGen</tt> executable into the
- into <tt>$LLVM_OBJ_ROOT/{BUILD_TYPE}/bin</tt> directory (e.g. into
- <tt>.../Release/bin</tt> for a Release build).</li>
- <li>Build LLVM as usual.</li>
- </ol>
- <p>The result of such a build will produce executables that are not executable
- on your build host (--build option) but can be executed on your compile host
+ <p>It is possible to cross-compile LLVM itself. That is, you can create LLVM
+ executables and libraries to be hosted on a platform different from the
+ platform where they are build (a Canadian Cross build). To configure a
+ cross-compile, supply the configure script with <tt>--build</tt> and
+ <tt>--host</tt> options that are different. The values of these options must
+ be legal target triples that your GCC compiler supports.</p>
+
+ <p>The result of such a build is executables that are not runnable on
+ on the build host (--build option) but can be executed on the compile host
(--host option).</p>
- <p><b>Notes:</b></p>
- <div class="doc_notes">
- <ol>
- <li><a name="ccn_1">Cross-compiling</a> was tested only with Linux as
- build platform and Windows as host using mingw32 cross-compiler. Other
- combinations have not been tested.</li>
- </ol>
- </div>
</div>
<!-- ======================================================================= -->
<p>This directory contains projects that are not strictly part of LLVM but are
shipped with LLVM. This is also the directory where you should create your own
LLVM-based projects. See <tt>llvm/projects/sample</tt> for an example of how
- to set up your own project. See <tt>llvm/projects/Stacker</tt> for a fully
- functional example of a compiler front end.</p>
+ to set up your own project.</p>
</div>
<!-- ======================================================================= -->
<dd><tt>opt</tt> reads LLVM bitcode, applies a series of LLVM to LLVM
transformations (which are specified on the command line), and then outputs
the resultant bitcode. The '<tt>opt --help</tt>' command is a good way to
- get a list of the program transformations available in LLVM.<br/>
+ get a list of the program transformations available in LLVM.<br>
<dd><tt>opt</tt> can also be used to run a specific analysis on an input
LLVM bitcode file and print out the results. It is primarily useful for
debugging analyses, or familiarizing yourself with what an analysis does.</dd>
<div class="doc_text">
<p>This section gives an example of using LLVM. llvm-gcc3 is now obsolete,
-so we only include instructiosn for llvm-gcc4.
+so we only include instructions for llvm-gcc4.
</p>
<p><b>Note:</b> The <i>gcc4</i> frontend's invocation is <b><i>considerably different</i></b>
<div class="doc_text">
-<p>This document is just an <b>introduction</b> to how to use LLVM to do
+<p>This document is just an <b>introduction</b> on how to use LLVM to do
some simple things... there are many more interesting and complicated things
that you can do that aren't documented here (but we'll gladly accept a patch
if you want to write something up!). For more information about LLVM, check
<hr>
<address>
<a href="http://jigsaw.w3.org/css-validator/check/referer"><img
- src="http://jigsaw.w3.org/css-validator/images/vcss" alt="Valid CSS!"></a>
+ src="http://jigsaw.w3.org/css-validator/images/vcss-blue" alt="Valid CSS"></a>
<a href="http://validator.w3.org/check/referer"><img
- src="http://www.w3.org/Icons/valid-html401" alt="Valid HTML 4.01!" /></a>
+ src="http://www.w3.org/Icons/valid-html401-blue" alt="Valid HTML 4.01"></a>
<a href="mailto:sabre@nondot.org">Chris Lattner</a><br>
<a href="http://llvm.x10sys.com/rspencer/">Reid Spencer</a><br>
projects / oota-llvm.git / blobdiff