<li>Read the documentation.</li>
<li>Read the documentation.</li>
<li>Remember that you were warned twice about reading the documentation.</li>
- <li>Install the llvm-gcc-4.2 front end if you intend to compile C or C++:
+ <li>Install the llvm-gcc-4.2 front end if you intend to compile C or C++
+ (see <a href="#installcf">Install the GCC Front End</a> for details):</li>
<ol>
<li><tt>cd <i>where-you-want-the-C-front-end-to-live</i></tt></li>
- <li><tt>gunzip --stdout llvm-gcc-4.2-<i>version</i>-<i>platform</i>.tar.gz | tar -xvf -</tt>
- </li>
- <li>Note: If the binary extension is ".bz" use bunzip2 instead of gunzip.</li>
- <li>Add llvm-gcc's "bin" directory to your PATH variable.</li>
+ <li><tt>gunzip --stdout llvm-gcc-4.2-<i>version</i>-<i>platform</i>.tar.gz | tar -xvf -</tt></li>
+ <li><tt><i>install-binutils-binary-from-MinGW</i></tt> (Windows only)</li>
+ <li>Note: If the binary extension is "<tt>.bz</tt>" use <tt>bunzip2</tt> instead of <tt>gunzip</tt>.</li>
+ <li>Note: On Windows, use <a href="http://www.7-zip.org">7-Zip</a> or a similar archiving tool.</li>
+ <li>Add <tt>llvm-gcc</tt>'s "<tt>bin</tt>" directory to your <tt>PATH</tt> environment variable.</li>
</ol></li>
<li>Get the LLVM Source Code
<th>Arch</th>
<th>Compilers</th>
</tr>
+<tr>
+ <td>AuroraUX</td>
+ <td>x86<sup><a href="#pf_1">1</a></sup></td>
+ <td>GCC</td>
+</tr>
<tr>
<td>Linux</td>
<td>x86<sup><a href="#pf_1">1</a></sup></td>
<td>GCC</td>
</tr>
+<tr>
+ <td>Linux</td>
+ <td>amd64</td>
+ <td>GCC</td>
+</tr>
<tr>
<td>Solaris</td>
<td>V9 (Ultrasparc)</td>
<td>MacOS X<sup><a href="#pf_2">2</a>,<a href="#pf_9">9</a></sup></td>
<td>x86</td>
<td>GCC</td>
-
</tr>
<tr>
<td>Cygwin/Win32</td>
- <td>x86<sup><a href="#pf_1">1</a>,<a href="#pf_8">8</a></sup></td>
- <td>GCC 3.4.X, binutils 2.15</td>
+ <td>x86<sup><a href="#pf_1">1</a>,<a href="#pf_8">8</a>,
+ <a href="#pf_11">11</a></sup></td>
+ <td>GCC 3.4.X, binutils 2.20</td>
</tr>
<tr>
<td>MinGW/Win32</td>
- <td>x86<sup><a href="#pf_1">1</a>,<a href="#pf_6">6</a>,<a href="#pf_8">8</a></sup></td>
- <td>GCC 3.4.X, binutils 2.15</td>
-</tr>
-<tr>
- <td>Linux</td>
- <td>amd64</td>
- <td>GCC</td>
+ <td>x86<sup><a href="#pf_1">1</a>,<a href="#pf_6">6</a>,
+ <a href="#pf_8">8</a>, <a href="#pf_10">10</a></sup></td>
+ <td>GCC 3.4.X, binutils 2.20</td>
</tr>
</table>
<li><a name="pf_5">The GCC-based C/C++ frontend does not build</a></li>
<li><a name="pf_6">The port is done using the MSYS shell.</a></li>
<li><a name="pf_7">Native code generation exists but is not complete.</a></li>
-<li><a name="pf_8">Binutils</a> up to post-2.17 has bug in bfd/cofflink.c
- preventing LLVM from building correctly. Several workarounds have been
- introduced into LLVM build system, but the bug can occur anytime in the
- future. We highly recommend that you rebuild your current binutils with the
- patch from <a href="http://sourceware.org/bugzilla/show_bug.cgi?id=2659">
- Binutils bugzilla</a>, if it wasn't already applied.</li>
+<li><a name="pf_8">Binutils 2.20 or later is required to build the assembler
+ generated by LLVM properly.</a></li>
<li><a name="pf_9">XCode 2.5 and gcc 4.0.1</a> (Apple Build 5370) will trip
internal LLVM assert messages when compiled for Release at optimization
levels greater than 0 (i.e., <i>"-O1"</i> and higher).
Add <i>OPTIMIZE_OPTION="-O0"</i> to the build command line
if compiling for LLVM Release or bootstrapping the LLVM toolchain.</li>
+<li><a name="pf_10">For MSYS/MinGW on Windows, be sure to install the MSYS
+ version of the perl package, and be sure it appears in your path
+ before any Windows-based versions such as Strawberry Perl and
+ ActivePerl, as these have Windows-specifics that will cause the
+ build to fail.</a></li>
+<li><a name="pf_11">In general, LLVM modules requiring dynamic linking can
+ not be built on Windows. However, you can build LLVM tools using
+ <i>"make tools-only"</i>.</li>
</ol>
</div>
<p>Note that you will need about 1-3 GB of space for a full LLVM build in Debug
mode, depending on the system (it is so large because of all the debugging
information and the fact that the libraries are statically linked into multiple
-tools). If you do not need many of the tools and you are space-conscious,
-you can disable them individually in <tt>llvm/tools/Makefile</tt>. The Release
-build requires considerably less space.</p>
+tools). If you do not need many of the tools and you are space-conscious, you
+can pass <tt>ONLY_TOOLS="tools you need"</tt> to make. The Release build
+requires considerably less space.</p>
<p>The LLVM suite <i>may</i> compile on other platforms, but it is not
guaranteed to do so. If compilation is successful, the LLVM utilities should be
<tr>
<td><a href="http://www.gnu.org/software/autoconf">GNU Autoconf</a></td>
- <td>2.59</td>
+ <td>2.60</td>
<td>Configuration script builder<sup><a href="#sf4">4</a></sup></td>
</tr>
<tr>
<td><a href="http://www.gnu.org/software/automake">GNU Automake</a></td>
- <td>1.9.2</td>
+ <td>1.9.6</td>
<td>aclocal macro generator<sup><a href="#sf4">4</a></sup></td>
</tr>
<tr>
<td><a href="http://savannah.gnu.org/projects/libtool">libtool</a></td>
- <td>1.5.10</td>
+ <td>1.5.22</td>
<td>Shared library manager<sup><a href="#sf4">4</a></sup></td>
</tr>
<li><a name="sf3">Only needed if you want to run the automated test
suite in the <tt>llvm/test</tt> directory.</a></li>
<li><a name="sf4">If you want to make changes to the configure scripts,
- you will need GNU autoconf (2.59), and consequently, GNU M4 (version 1.4
- or higher). You will also need automake (1.9.2). We only use aclocal
+ you will need GNU autoconf (2.60), and consequently, GNU M4 (version 1.4
+ or higher). You will also need automake (1.9.6). We only use aclocal
from that package.</a></li>
</ol>
</div>
about symbols remaining in the table on destruction.</p>
<p><b>GCC 4.1.2 20071124 (Red Hat 4.1.2-42)</b>: Suffers from the same symptoms
as the previous one. It appears to work with ENABLE_OPTIMIZED=0 (the default).</p>
-
+<p><b>Cygwin GCC 4.3.2 20080827 (beta) 2</b>:
+ Users <a href="http://llvm.org/PR4145">reported</a> various problems related
+ with link errors when using this GCC version.</p>
+<p><b>Debian GCC 4.3.2 on X86</b>: Crashes building some files in LLVM 2.6.</p>
+<p><b>GCC 4.3.3 (Debian 4.3.3-10) on ARM</b>: Miscompiles parts of LLVM 2.6
+when optimizations are turned on. The symptom is an infinite loop in
+FoldingSetImpl::RemoveNode while running the code generator.</p>
<p><b>GNU ld 2.16.X</b>. Some 2.16.X versions of the ld linker will produce very
long warning messages complaining that some ".gnu.linkonce.t.*" symbol was
defined in a discarded section. You can safely ignore these messages as they are
<div class="doc_text">
<p>If you have access to our Subversion repository, you can get a fresh copy of
-the entire source code. All you need to do is check it out from Subvresion as
+the entire source code. All you need to do is check it out from Subversion as
follows:</p>
<ul>
subdirectories of the '<tt>tags</tt>' directory:</p>
<ul>
+<li>Release 2.6: <b>RELEASE_26</b></li>
+<li>Release 2.5: <b>RELEASE_25</b></li>
<li>Release 2.4: <b>RELEASE_24</b></li>
<li>Release 2.3: <b>RELEASE_23</b></li>
<li>Release 2.2: <b>RELEASE_22</b></li>
<div class="doc_text">
-<p>Before configuring and compiling the LLVM suite, you can optionally extract the
-LLVM GCC front end from the binary distribution. It is used for running the
-llvm-test testsuite and for compiling C/C++ programs. Note that you can optionally
-<a href="GCCFEBuildInstrs.html">build llvm-gcc yourself</a> after building the
+<p>Before configuring and compiling the LLVM suite (or if you want to use just the LLVM
+GCC front end) you can optionally extract the front end from the binary distribution.
+It is used for running the llvm-test testsuite and for compiling C/C++ programs. Note that
+
you can optionally <a href="GCCFEBuildInstrs.html">build llvm-gcc yourself</a> after building the
main LLVM repository.</p>
-<p>To install the GCC front end, do the following:</p>
+<p>To install the GCC front end, do the following (on Windows, use an archival tool
+like <a href="http://www.7-zip.org">7-zip</a> that understands gzipped tars):</p>
<ol>
<li><tt>cd <i>where-you-want-the-front-end-to-live</i></tt></li>
-</tt></li>
</ol>
-<p>Once the binary is uncompressed, you should add a symlink for llvm-gcc and
-llvm-g++ to some directory in your path. When you configure LLVM, it will
-automatically detect llvm-gcc's presence (if it is in your path) enabling its
-use in llvm-test. Note that you can always build or install llvm-gcc at any
-pointer after building the main LLVM repository: just reconfigure llvm and
+<p>Once the binary is uncompressed, if you're using a *nix-based system, add a symlink for
+<tt>llvm-gcc</tt> and <tt>llvm-g++</tt> to some directory in your path. If you're using a
+Windows-based system, add the <tt>bin</tt> subdirectory of your front end installation directory
+to your <tt>PATH</tt> environment variable. For example, if you uncompressed the binary to
+<tt>c:\llvm-gcc</tt>, add <tt>c:\llvm-gcc\bin</tt> to your <tt>PATH</tt>.</p>
+
+<p>If you now want to build LLVM from source, when you configure LLVM, it will
+automatically detect <tt>llvm-gcc</tt>'s presence (if it is in your path) enabling its
+use in llvm-test. Note that you can always build or install <tt>llvm-gcc</tt> at any
+point after building the main LLVM repository: just reconfigure llvm and
llvm-test will pick it up.
</p>
-<p>The binary versions of the GCC front end may not suit all of your needs. For
-example, the binary distribution may include an old version of a system header
-file, not "fix" a header file that needs to be fixed for GCC, or it may be
-linked with libraries not available on your system.</p>
+<p>As a convenience for Windows users, the front end binaries for MinGW/x86 include
+versions of the required w32api and mingw-runtime binaries. The last remaining step for
+Windows users is to simply uncompress the binary binutils package from
+<a href="http://mingw.org/">MinGW</a> into your front end installation directory. While the
+front end installation steps are not quite the same as a typical manual MinGW installation,
+they should be similar enough to those who have previously installed MinGW on Windows systems.</p>
+
+<p>To install binutils on Windows:</p>
-<p>In cases like these, you may want to try <a
-href="GCCFEBuildInstrs.html">building the GCC front end from source.</a> This is
-much easier now than it was in the past.</p>
+<ol>
+ <li><tt><i>download GNU Binutils from <a href="http://sourceforge.net/projects/mingw/files/">MinGW Downloads</a></i></tt></li>
+ <li><tt>cd <i>where-you-uncompressed-the-front-end</i></tt></li>
+ <li><tt><i>uncompress archived binutils directories (not the tar file) into the current directory</i></tt></li>
+</ol>
+
+<p>The binary versions of the LLVM GCC front end may not suit all of your needs. For
+example, the binary distribution may include an old version of a system header
+file, not "fix" a header file that needs to be fixed for GCC, or it may be linked with
+libraries not available on your system. In cases like these, you may want to try
+<a href="GCCFEBuildInstrs.html">building the GCC front end from source</a>. Thankfully,
+this is much easier now than it was in the past.</p>
+
+<p>We also do not currently support updating of the GCC front end by manually overlaying
+newer versions of the w32api and mingw-runtime binary packages that may become available
+from MinGW. At this time, it's best to think of the MinGW LLVM GCC front end binary as
+a self-contained convenience package that requires Windows users to simply download and
+uncompress the GNU Binutils binary package from the MinGW project.</p>
+
+<p>Regardless of your platform, if you discover that installing the LLVM GCC front end
+binaries is not as easy as previously described, or you would like to suggest improvements,
+please let us know how you would like to see things improved by dropping us a note on our
+<a href="http://llvm.org/docs/#maillist">mailing list</a>.</p>
</div>
</dd>
<dt><i>--enable-optimized</i></dt>
<dd>
- Enables optimized compilation by default (debugging symbols are removed
- and GCC optimization flags are enabled). The default is to use an
- unoptimized build (also known as a debug build).
+ Enables optimized compilation (debugging symbols are removed
+ and GCC optimization flags are enabled). Note that this is the default
+ setting if you are using the LLVM distribution. The default behavior
+ of an Subversion checkout is to use an unoptimized build (also known as a
+ debug build).
<br><br>
</dd>
<dt><i>--enable-debug-runtime</i></dt>
<dl>
<dt>Debug Builds
<dd>
- These builds are the default when one types <tt>gmake</tt> (unless the
- <tt>--enable-optimized</tt> option was used during configuration). The
- build system will compile the tools and libraries with debugging
- information.
+ These builds are the default when one is using an Subversion checkout and
+ types <tt>gmake</tt> (unless the <tt>--enable-optimized</tt> option was
+ used during configuration). The build system will compile the tools and
+ libraries with debugging information. To get a Debug Build using the
+ LLVM distribution the <tt>--disable-optimized</tt> option must be passed
+ to <tt>configure</tt>.
<br><br>
<dt>Release (Optimized) Builds
<tt>gmake</tt> command line. For these builds, the build system will
compile the tools and libraries with GCC optimizations enabled and strip
debugging information from the libraries and executables it generates.
+ Note that Release Builds are default when using an LLVM distribution.
<br><br>
<dt>Profile Builds
<dd>
Perform a Release (Optimized) build without assertions enabled.
<br><br>
+
+ <dt><tt>gmake ENABLE_OPTIMIZED=0</tt>
+ <dd>
+ Perform a Debug build.
+ <br><br>
<dt><tt>gmake ENABLE_PROFILING=1</tt>
<dd>
named after the build type:</p>
<dl>
- <dt>Debug Builds
+ <dt>Debug Builds with assertions enabled (the default)
<dd>
<dl>
<dt>Tools
- <dd><tt><i>OBJ_ROOT</i>/Debug/bin</tt>
+ <dd><tt><i>OBJ_ROOT</i>/Debug+Asserts/bin</tt>
<dt>Libraries
- <dd><tt><i>OBJ_ROOT</i>/Debug/lib</tt>
+ <dd><tt><i>OBJ_ROOT</i>/Debug+Asserts/lib</tt>
</dl>
<br><br>
<div class="doc_code">
<pre>
$ mount -t binfmt_misc none /proc/sys/fs/binfmt_misc
-$ echo ':llvm:M::llvm::/path/to/lli:' > /proc/sys/fs/binfmt_misc/register
+$ echo ':llvm:M::BC::/path/to/lli:' > /proc/sys/fs/binfmt_misc/register
$ chmod u+x hello.bc (if needed)
$ ./hello.bc
</pre>
</div>
<p>
-This allows you to execute LLVM bitcode files directly. Thanks to Jack
-Cummings for pointing this out!
+This allows you to execute LLVM bitcode files directly. On Debian, you
+can also use this command instead of the 'echo' command above:</p>
</p>
+<div class="doc_code">
+<pre>
+$ sudo update-binfmts --install llvm /path/to/lli --magic 'BC'
+</pre>
</div>
+</div>
<!-- *********************************************************************** -->
<div class="doc_section">
<p>The <b>tools</b> directory contains the executables built out of the
libraries above, which form the main part of the user interface. You can
-always get help for a tool by typing <tt>tool_name --help</tt>. The
+always get help for a tool by typing <tt>tool_name -help</tt>. The
following is a brief introduction to the most important tools. More detailed
information is in the <a href="CommandGuide/index.html">Command Guide</a>.</p>
<dt><tt><b>opt</b></tt></dt>
<dd><tt>opt</tt> reads LLVM bitcode, applies a series of LLVM to LLVM
transformations (which are specified on the command line), and then outputs
- the resultant bitcode. The '<tt>opt --help</tt>' command is a good way to
+ the resultant bitcode. The '<tt>opt -help</tt>' command is a good way to
get a list of the program transformations available in LLVM.<br>
<dd><tt>opt</tt> can also be used to run a specific analysis on an input
LLVM bitcode file and print out the results. It is primarily useful for
projects / oota-llvm.git / blobdiff