Move TableGen's parser and entry point into a library

[oota-llvm.git] / Makefile.config.in

diff --git a/Makefile.config.in b/Makefile.config.in
index 8fce3b27c82923da111ae1140f57ab9495800891..49532c1ced359d06a698823e81007f928ca83509 100644 (file)
--- a/Makefile.config.in
+++ b/Makefile.config.in
@@ -39,14 +39,18 @@ ifndef PROJECT_NAME
 PROJECT_NAME := $(LLVMPackageName)
 endif
 
-PROJ_OBJ_DIR  := $(shell $(PWD))
-PROJ_OBJ_ROOT := $(shell cd $(PROJ_OBJ_DIR)/$(LEVEL); $(PWD))
+# The macro below is expanded when 'realpath' is not built-in.
+# Built-in 'realpath' is available on GNU Make 3.81.
+realpath = $(shell cd $(1); $(PWD))
+
+PROJ_OBJ_DIR  := $(call realpath, .)
+PROJ_OBJ_ROOT := $(call realpath, $(PROJ_OBJ_DIR)/$(LEVEL))
 
 ifeq ($(PROJECT_NAME),llvm)
-LLVM_SRC_ROOT   := $(shell cd @abs_top_srcdir@; $(PWD))
-LLVM_OBJ_ROOT   := $(shell cd @abs_top_builddir@; $(PWD))
-PROJ_SRC_ROOT   := $(shell cd $(LLVM_SRC_ROOT); $(PWD))
-PROJ_SRC_DIR    := $(shell cd $(LLVM_SRC_ROOT)/$(patsubst $(PROJ_OBJ_ROOT)%,%,$(PROJ_OBJ_DIR)); $(PWD))
+LLVM_SRC_ROOT   := $(call realpath, @abs_top_srcdir@)
+LLVM_OBJ_ROOT   := $(call realpath, @abs_top_builddir@)
+PROJ_SRC_ROOT   := $(LLVM_SRC_ROOT)
+PROJ_SRC_DIR    := $(call realpath, $(LLVM_SRC_ROOT)/$(patsubst $(PROJ_OBJ_ROOT)%,%,$(PROJ_OBJ_DIR)))
 prefix          := @prefix@
 PROJ_prefix     := $(prefix)
 PROJ_VERSION    := $(LLVMVersion)
@@ -66,7 +70,7 @@ endif
 ifndef LLVM_OBJ_ROOT
 $(error Projects must define LLVM_OBJ_ROOT)
 endif
-PROJ_SRC_DIR := $(shell cd $(PROJ_SRC_ROOT)/$(patsubst $(PROJ_OBJ_ROOT)%,%,$(PROJ_OBJ_DIR)); $(PWD))
+PROJ_SRC_DIR := $(call realpath, $(PROJ_SRC_ROOT)/$(patsubst $(PROJ_OBJ_ROOT)%,%,$(PROJ_OBJ_DIR)))
 prefix          := $(PROJ_INSTALL_ROOT)
 PROJ_prefix     := $(prefix)
 ifndef PROJ_VERSION
@@ -119,6 +123,9 @@ TARGET_TRIPLE=@target@
 # Extra options to compile LLVM with
 EXTRA_OPTIONS=@EXTRA_OPTIONS@
 
+# Extra options to link LLVM with
+EXTRA_LD_OPTIONS=@EXTRA_LD_OPTIONS@
+
 # Endian-ness of the target
 ENDIAN=@ENDIAN@
 
@@ -160,7 +167,7 @@ CAT        := @CAT@
 DOT        := @DOT@
 DOXYGEN    := @DOXYGEN@
 GROFF      := @GROFF@
-GZIP       := @GZIP@
+GZIPBIN    := @GZIPBIN@
 OCAMLC     := @OCAMLC@
 OCAMLOPT   := @OCAMLOPT@
 OCAMLDEP   := @OCAMLDEP@
@@ -181,25 +188,6 @@ LIBS       := @LIBS@
 # Targets that we should build
 TARGETS_TO_BUILD=@TARGETS_TO_BUILD@
 
-# Path to location for LLVM C/C++ front-end. You can modify this if you
-# want to override the value set by configure.
-LLVMGCCDIR := @LLVMGCCDIR@
-
-# Full pathnames of LLVM C/C++ front-end 'cc1' and 'cc1plus' binaries:
-LLVMGCC  := @LLVMGCC@
-LLVMGXX  := @LLVMGXX@
-LLVMCC1  := @LLVMCC1@
-LLVMCC1PLUS := @LLVMCC1PLUS@
-LLVMGCC_LANGS := @LLVMGCC_LANGS@
-
-# Information on Clang, if configured.
-CLANGPATH := @CLANGPATH@
-CLANGXXPATH := @CLANGXXPATH@
-ENABLE_BUILT_CLANG := @ENABLE_BUILT_CLANG@
-
-# The LLVM capable compiler to use.
-LLVMCC_OPTION := @LLVMCC_OPTION@
-
 # Path to directory where object files should be stored during a build.
 # Set OBJ_ROOT to "." if you do not want to use a separate place for
 # object files.
@@ -222,8 +210,8 @@ RDYNAMIC := @RDYNAMIC@
 
 # When ENABLE_PROFILING is enabled, profile instrumentation is done
 # and output is put into the "<Flavor>+Profile" directories, where
-# <Flavor> is either Debug or Release depending on how other builkd
-# flags are set.. Otherwise, output is put in the <Flavor>
+# <Flavor> is either Debug or Release depending on how other build
+# flags are set. Otherwise, output is put in the <Flavor>
 # directories.
 #ENABLE_PROFILING = 1
 @ENABLE_PROFILING@
@@ -255,6 +243,9 @@ OPTIMIZE_OPTION := @OPTIMIZE_OPTION@
 # information to allow gprof to be used to get execution frequencies.
 #ENABLE_PROFILING = 1
 
+# When ENABLE_DOCS is disabled, docs/ will not be built.
+ENABLE_DOCS = @ENABLE_DOCS@
+
 # When ENABLE_DOXYGEN is enabled, the doxygen documentation will be built
 ENABLE_DOXYGEN = @ENABLE_DOXYGEN@
 
@@ -267,9 +258,15 @@ ENABLE_PIC := @ENABLE_PIC@
 # Do we want to build a shared library and link the tools with it?
 ENABLE_SHARED := @ENABLE_SHARED@
 
+# Do we want to link the stdc++ into a shared library? (Cygming)
+ENABLE_EMBED_STDCXX := @ENABLE_EMBED_STDCXX@
+
 # Use -fvisibility-inlines-hidden?
 ENABLE_VISIBILITY_INLINES_HIDDEN := @ENABLE_VISIBILITY_INLINES_HIDDEN@
 
+# Do we want to allow timestamping information into builds?
+ENABLE_TIMESTAMPS := @ENABLE_TIMESTAMPS@
+
 # This option tells the Makefiles to produce verbose output.
 # It essentially prints the commands that make is executing
 #VERBOSE = 1
@@ -317,12 +314,6 @@ endif
 # Location of the plugin header file for gold.
 BINUTILS_INCDIR := @BINUTILS_INCDIR@
 
-C_INCLUDE_DIRS := @C_INCLUDE_DIRS@
-CXX_INCLUDE_ROOT := @CXX_INCLUDE_ROOT@
-CXX_INCLUDE_ARCH := @CXX_INCLUDE_ARCH@
-CXX_INCLUDE_32BIT_DIR = @CXX_INCLUDE_32BIT_DIR@
-CXX_INCLUDE_64BIT_DIR = @CXX_INCLUDE_64BIT_DIR@
-
 # When ENABLE_LLVMC_DYNAMIC is enabled, LLVMC will link libCompilerDriver
 # dynamically. This is needed to make dynamic plugins work on some targets
 # (Windows).
@@ -340,6 +331,8 @@ NO_MISSING_FIELD_INITIALIZERS = @NO_MISSING_FIELD_INITIALIZERS@
 # -Wno-variadic-macros
 NO_VARIADIC_MACROS = @NO_VARIADIC_MACROS@
 
+# Was polly found in tools/polly?
+LLVM_HAS_POLLY = @LLVM_HAS_POLLY@
 # Flags supported by the linker.
-# bfd ld / gold -retain-symbols-file file
-HAVE_LINK_RETAIN_SYMBOLS_FILE = @HAVE_LINK_RETAIN_SYMBOLS_FILE@
+# bfd ld / gold --version-script=file
+HAVE_LINK_VERSION_SCRIPT = @HAVE_LINK_VERSION_SCRIPT@