# in the current directory. Also, if you want to build files in addition
# to the local files, you can use the ExtraSource variable
#
+# 5. SourceDir - If specified, this specifies a directory that the source files
+# are in, if they are not in the current directory. This should include a
+# trailing / character.
+#
+# 6. PROJ_COMPILE - If set to 1, then this makefile can also be used to
+# compile other projects using llvm. Note if this option is set then the
+# following *must* hold
+# PROJLEVEL should be set to the top of the source directory for the
+# project files
+# LEVEL should be set to the top of LLVM source tree
+# LLVM_LIB_DIR should be set to the top of the LLVM build tree
+#
#===-----------------------------------------------------------------------====
# Configuration file to set paths specific to local installation of LLVM
#
include $(LEVEL)/Makefile.config
-# These are options that can either be enabled here, or can be enabled on the
-# make command line (ie, make ENABLE_PROFILING=1)
+###########################################################################
+# Directory Configuration
+# This section of the Makefile determines what is where. To be
+# specific, there are several locations that need to be defined:
+#
+# o LLVM_SRC_ROOT : The root directory of the LLVM source code.
+# o LLVM_OBJ_ROOT : The root directory containing the built LLVM code.
+#
+# o BUILD_SRC_DIR : The directory containing the code to build.
+# o BUILD_SRC_ROOT : The root directory of the code to build.
+#
+# o BUILD_OBJ_DIR : The directory in which compiled code will be placed.
+# o BUILD_OBJ_ROOT : The root directory in which compiled code is placed.
+#
+###########################################################################
+
+#
+# Set the source build directory. That is almost always the current directory.
#
+ifndef BUILD_SRC_DIR
+BUILD_SRC_DIR = $(shell pwd)
+endif
-# When ENABLE_PROFILING is enabled, the llvm source base is built with profile
-# information to allow gprof to be used to get execution frequencies.
#
-#ENABLE_PROFILING = 1
+# Set the source root directory.
+#
+ifndef BUILD_SRC_ROOT
+BUILD_SRC_ROOT = $(shell cd $(BUILD_SRC_DIR)/$(LEVEL); pwd)
+endif
-# When ENABLE_PURIFY is enabled, the LLVM tools are linked with purify (which
-# must be locally installed) to allow for some automated memory error debugging.
#
-#ENABLE_PURIFY = 1
+# Set the object build directory. Its location depends upon the source path
+# and where object files should go.
+#
+ifndef BUILD_OBJ_DIR
+ifeq ($(OBJ_ROOT),.)
+BUILD_OBJ_DIR = $(shell pwd)
+else
+BUILD_OBJ_DIR := $(OBJ_ROOT)$(patsubst $(shell dirname $(BUILD_SRC_ROOT))%,%,$(shell cd $(BUILD_SRC_DIR); pwd))
+endif
+endif
-# When ENABLE_OPTIMIZED is enabled, Release builds of all of the LLVM code are
-# turned on, and Debug builds are turned off.
#
-#ENABLE_OPTIMIZED = 1
+# Set the root of the object directory.
+#
+ifndef BUILD_OBJ_ROOT
+ifeq ($(OBJ_ROOT),.)
+BUILD_OBJ_ROOT = $(shell cd $(LEVEL); pwd)
+else
+BUILD_OBJ_ROOT := $(OBJ_ROOT)$(patsubst $(shell dirname $(BUILD_SRC_ROOT))%,%,$(shell cd $(BUILD_SRC_ROOT); pwd))
+endif
+endif
+#
+# Set the LLVM source directory.
+# It is typically the root directory of what we're compiling now.
+#
+ifndef LLVM_SRC_ROOT
+LLVM_SRC_ROOT = $(BUILD_SRC_ROOT)
+endif
+
+#
+# Set the LLVM object directory.
+#
+ifndef LLVM_OBJ_ROOT
+LLVM_OBJ_ROOT = $(BUILD_OBJ_ROOT)
+endif
# Figure out how to do platform specific stuff on this platform. This is really
# gross and should be autoconfiscated (automake actually), but should hopefully
# work on Linux and solaris (SunOS).
#
UNAME := $(shell uname)
-include $(LEVEL)/Makefile.$(UNAME)
+include $(LLVM_SRC_ROOT)/Makefile.$(UNAME)
ifdef SHARED_LIBRARY
# if SHARED_LIBRARY is specified, the default is to build the dynamic lib
# Default for install is to at least build everything...
install ::
-
-# Figure out which directory to build stuff into. We want to build into the
-# /shared directory by default because it is guaranteed to be local to the
-# current machine.
-#
-ifeq ($(LLVM_OBJ_DIR),.)
-BUILD_ROOT = $(LLVM_OBJ_DIR)
-BUILD_ROOT_TOP = $(LEVEL)
-else
-
-BUILD_ROOT := $(LLVM_OBJ_DIR)$(patsubst $(HOME)%,%,$(shell pwd))
-
-# Calculate the BUILD_ROOT_TOP variable, which is the top of the llvm/ tree.
-# Note that although this is just equal to $(BUILD_ROOT)/$(LEVEL), we cannot use
-# this expression because some of the directories on the source tree may not
-# exist in the build tree (for example the test/ heirarchy). Thus we evaluate
-# the directory to eliminate the ../'s
-#
-TOP_DIRECTORY := $(shell cd $(LEVEL); pwd)
-BUILD_ROOT_TOP := $(LLVM_OBJ_DIR)$(patsubst $(HOME)%,%,$(TOP_DIRECTORY))
-endif
+# Default rule for test. It ensures everything has a test rule
+test::
#--------------------------------------------------------------------
# Variables derived from configuration options...
#--------------------------------------------------------------------
#BinInstDir=/usr/local/bin
-#LibInstDir=/usrl/local/lib/xxx
+#LibInstDir=/usr/local/lib/xxx
#DocInstDir=/usr/doc/xxx
BURG_OPTS = -I
-PURIFY := $(PURIFY) -cache-dir="$(BUILD_ROOT_TOP)/../purifycache" -chain-length="30" -messages=all
+PURIFY := $(PURIFY) -cache-dir="$(BUILD_OBJ_ROOT)/../purifycache" -chain-length="30" -messages=all
-# Shorthand for commonly accessed directories
-LIBDEBUG := $(BUILD_ROOT_TOP)/lib/Debug
-LIBRELEASE := $(BUILD_ROOT_TOP)/lib/Release
-LIBPROFILE := $(BUILD_ROOT_TOP)/lib/Profile
-TOOLDEBUG := $(BUILD_ROOT_TOP)/tools/Debug
-TOOLRELEASE := $(BUILD_ROOT_TOP)/tools/Release
-TOOLPROFILE := $(BUILD_ROOT_TOP)/tools/Profile
+ifdef ENABLE_PROFILING
+ ENABLE_OPTIMIZED = 1
+ CONFIGURATION := Profile
+else
+ ifdef ENABLE_OPTIMIZED
+ CONFIGURATION := Release
+ else
+ CONFIGURATION := Debug
+ endif
+endif
+
+###########################################################################
+# Library Locations
+# These variables describe various library locations:
+#
+# DEST* = Location of where libraries that are built will be placed.
+# LLVM* = Location of LLVM libraries used for linking.
+# PROJ* = Location of previously built libraries used for linking.
+###########################################################################
+
+# Libraries that are being built
+DESTLIBDEBUG := $(BUILD_OBJ_ROOT)/lib/Debug
+DESTLIBRELEASE := $(BUILD_OBJ_ROOT)/lib/Release
+DESTLIBPROFILE := $(BUILD_OBJ_ROOT)/lib/Profile
+DESTLIBCURRENT := $(BUILD_OBJ_ROOT)/lib/$(CONFIGURATION)
+
+# LLVM libraries used for linking
+LLVMLIBDEBUGSOURCE := $(LLVM_OBJ_ROOT)/lib/Debug
+LLVMLIBRELEASESOURCE := $(LLVM_OBJ_ROOT)/lib/Release
+LLVMLIBPROFILESOURCE := $(LLVM_OBJ_ROOT)/lib/Profile
+LLVMLIBCURRENTSOURCE := $(LLVM_OBJ_ROOT)/lib/$(CONFIGURATION)
+
+# Libraries that were built that will now be used for linking
+PROJLIBDEBUGSOURCE := $(BUILD_OBJ_ROOT)/lib/Debug
+PROJLIBRELEASESOURCE := $(BUILD_OBJ_ROOT)/lib/Release
+PROJLIBPROFILESOURCE := $(BUILD_OBJ_ROOT)/lib/Profile
+PROJLIBCURRENTSOURCE := $(BUILD_OBJ_ROOT)/lib/$(CONFIGURATION)
+
+###########################################################################
+# Tool Locations
+# These variables describe various tool locations:
+#
+# DEST* = Location of where tools that are built will be placed.
+# LLVM* = Location of LLVM tools used for building.
+# PROJ* = Location of previously built tools used for linking.
+###########################################################################
+
+DESTTOOLDEBUG := $(BUILD_OBJ_ROOT)/tools/Debug
+DESTTOOLRELEASE := $(BUILD_OBJ_ROOT)/tools/Release
+DESTTOOLPROFILE := $(BUILD_OBJ_ROOT)/tools/Profile
+DESTTOOLCURRENT := $(BUILD_OBJ_ROOT)/tools/$(CONFIGURATION)
+
+LLVMTOOLDEBUG := $(LLVM_OBJ_ROOT)/tools/Debug
+LLVMTOOLRELEASE := $(LLVM_OBJ_ROOT)/tools/Release
+LLVMTOOLPROFILE := $(LLVM_OBJ_ROOT)/tools/Profile
+LLVMTOOLCURRENT := $(LLVM_OBJ_ROOT)/tools/$(CONFIGURATION)
+
+PROJTOOLDEBUG := $(BUILD_OBJ_ROOT)/tools/Debug
+PROJTOOLRELEASE := $(BUILD_OBJ_ROOT)/tools/Release
+PROJTOOLPROFILE := $(BUILD_OBJ_ROOT)/tools/Profile
+PROJTOOLCURRENT := $(BUILD_OBJ_ROOT)/tools/$(CONFIGURATION)
# Verbosity levels
-ifdef VERBOSE
-VERB :=
-else
+ifndef VERBOSE
VERB := @
endif
# Compilation options...
#---------------------------------------------------------
+###########################################################################
# Special tools used while building the LLVM tree. Burg is built as part of the
# utils directory.
-#
-BURG := $(LEVEL)/utils/Burg/burg.$(UNAME)
+###########################################################################
+BURG := $(LLVMTOOLCURRENT)/burg
RunBurg := $(BURG) $(BURG_OPTS)
+TBLGEN := $(LLVMTOOLCURRENT)/tblgen
# Enable this for profiling support with 'gprof'
# This automatically enables optimized builds.
ifdef ENABLE_PROFILING
PROFILE = -pg
- ENABLE_OPTIMIZED = 1
-else
- PROFILE =
endif
+###########################################################################
+# Compile Time Flags
+###########################################################################
+
+#
+# Include both the project headers and the LLVM headers for compilation
+#
+CPPFLAGS += -I$(BUILD_SRC_ROOT)/include -I$(LLVM_SRC_ROOT)/include
+
# By default, strip symbol information from executable
-ifdef KEEP_SYMBOLS
-STRIP =
-else
-STRIP = -s
+ifndef KEEP_SYMBOLS
+STRIP = $(PLATFORMSTRIPOPTS)
+STRIP_WARN_MSG = "(without symbols) "
endif
# Allow gnu extensions...
# -Wno-unused-parameter
CompileCommonOpts := -Wall -W -Wwrite-strings -Wno-unused -I$(LEVEL)/include
+CompileOptimizeOpts := -O3 -DNDEBUG -finline-functions -fshort-enums
# Compile a cpp file, don't link...
Compile := $(CXX) -c $(CPPFLAGS) $(CXXFLAGS) $(CompileCommonOpts)
CompileG := $(Compile) -g -D_DEBUG
-CompileO := $(Compile) -O3 -DNDEBUG -finline-functions -felide-constructors -fshort-enums ## DISABLE -freg-struct-return because of gcc3.2 bug
-CompileP := $(CompileO) $(PROFILE)
+CompileO := $(Compile) $(CompileOptimizeOpts) -felide-constructors -fomit-frame-pointer
+CompileP := $(Compile) $(CompileOptimizeOpts) -felide-constructors $(PROFILE)
# Compile a c file, don't link...
CompileC := $(CC) -c $(CPPFLAGS) $(CCFLAGS) $(CompileCommonOpts)
CompileCG := $(CompileC) -g -D_DEBUG
-CompileCO := $(CompileC) -O3 -DNDEBUG -finline-functions -felide-constructors -fshort-enums ## DISABLE -freg-struct-return because of gcc3.2 bug
-CompileCP := $(CompileCO) $(PROFILE)
+CompileCO := $(CompileC) $(CompileOptimizeOpts) -fomit-frame-pointer
+CompileCP := $(CompileC) $(CompileOptimizeOpts) $(PROFILE)
# Link final executable
else
Link := $(CXX)
endif
-LinkG := $(Link) -g -L $(LIBDEBUG) $(STRIP)
-LinkO := $(Link) -O3 -L $(LIBRELEASE)
-LinkP := $(Link) -O3 -L $(LIBPROFILE) $(PROFILE)
+
+ifdef PROJ_COMPILE
+# include both projlib source and llvmlib source
+LinkG := $(Link) -g -L$(PROJLIBDEBUGSOURCE) -L$(LLVMLIBDEBUGSOURCE) $(STRIP)
+LinkO := $(Link) -O3 -L$(PROJLIBRELEASESOURCE) -L$(LLVMLIBRELEASESOURCE)
+LinkP := $(Link) -O3 -L$(PROJLIBPROFILESOURCE) -L$(LLVMLIBPROFILESOURCE) $(PROFILE)
+else
+LinkG := $(Link) -g -L$(LLVMLIBDEBUGSOURCE) $(STRIP)
+LinkO := $(Link) -O3 -L$(LLVMLIBRELEASESOURCE)
+LinkP := $(Link) -O3 -L$(LLVMLIBPROFILESOURCE) $(PROFILE)
+endif
+
+
# Create one .o file from a bunch of .o files...
-Relink = ld -r
+Relink = ${LD} -r
# MakeSO - Create a .so file from a .o files...
MakeSO := $(CXX) $(MakeSharedObjectOption)
DependC := $(CC) -MM -I$(LEVEL)/include $(CPPFLAGS)
# Archive a bunch of .o files into a .a file...
-AR = ar cq
-BISON = bison
+AR = ${AR_PATH} cq
#----------------------------------------------------------
Source := $(ExtraSource) $(wildcard *.cpp *.c *.y *.l)
endif
-Objs := $(sort $(patsubst Debug/%.o, %.o, $(addsuffix .o,$(basename $(Source)))))
-ObjectsO := $(addprefix $(BUILD_ROOT)/Release/,$(Objs))
-ObjectsP := $(addprefix $(BUILD_ROOT)/Profile/,$(Objs))
-ObjectsG := $(addprefix $(BUILD_ROOT)/Debug/,$(Objs))
+Objs := $(sort $(patsubst Debug/%.o, %.o, $(addsuffix .o,$(notdir $(basename $(Source))))))
+ObjectsO := $(addprefix $(BUILD_OBJ_DIR)/Release/,$(Objs))
+ObjectsP := $(addprefix $(BUILD_OBJ_DIR)/Profile/,$(Objs))
+ObjectsG := $(addprefix $(BUILD_OBJ_DIR)/Debug/,$(Objs))
#---------------------------------------------------------
#---------------------------------------------------------
ifdef DIRS
-all install clean ::
+all install clean test ::
$(VERB) for dir in ${DIRS}; do \
(cd $$dir; $(MAKE) $@) || exit 1; \
done
all :: $(addsuffix /.makeall , $(PARALLEL_DIRS))
install :: $(addsuffix /.makeinstall, $(PARALLEL_DIRS))
clean :: $(addsuffix /.makeclean , $(PARALLEL_DIRS))
+test :: $(addsuffix /.maketest , $(PARALLEL_DIRS))
-%/.makeall %/.makeinstall %/.makeclean:
+%/.makeall %/.makeinstall %/.makeclean %/.maketest:
$(VERB) cd $(@D); $(MAKE) $(subst $(@D)/.make,,$@)
-
endif
#---------------------------------------------------------
# Make sure there isn't any extranous whitespace on the LIBRARYNAME option
LIBRARYNAME := $(strip $(LIBRARYNAME))
-LIBNAME_O := $(LIBRELEASE)/lib$(LIBRARYNAME).so
-LIBNAME_P := $(LIBPROFILE)/lib$(LIBRARYNAME).so
-LIBNAME_G := $(LIBDEBUG)/lib$(LIBRARYNAME).so
-LIBNAME_AO := $(LIBRELEASE)/lib$(LIBRARYNAME).a
-LIBNAME_AP := $(LIBPROFILE)/lib$(LIBRARYNAME).a
-LIBNAME_AG := $(LIBDEBUG)/lib$(LIBRARYNAME).a
-LIBNAME_OBJO := $(LIBRELEASE)/$(LIBRARYNAME).o
-LIBNAME_OBJP := $(LIBPROFILE)/$(LIBRARYNAME).o
-LIBNAME_OBJG := $(LIBDEBUG)/$(LIBRARYNAME).o
+LIBNAME_O := $(DESTLIBRELEASE)/lib$(LIBRARYNAME).so
+LIBNAME_P := $(DESTLIBPROFILE)/lib$(LIBRARYNAME).so
+LIBNAME_G := $(DESTLIBDEBUG)/lib$(LIBRARYNAME).so
+LIBNAME_AO := $(DESTLIBRELEASE)/lib$(LIBRARYNAME).a
+LIBNAME_AP := $(DESTLIBPROFILE)/lib$(LIBRARYNAME).a
+LIBNAME_AG := $(DESTLIBDEBUG)/lib$(LIBRARYNAME).a
+LIBNAME_OBJO := $(DESTLIBRELEASE)/$(LIBRARYNAME).o
+LIBNAME_OBJP := $(DESTLIBPROFILE)/$(LIBRARYNAME).o
+LIBNAME_OBJG := $(DESTLIBDEBUG)/$(LIBRARYNAME).o
+# dynamic target builds a shared object version of the library...
+dynamic:: $(DESTLIBCURRENT)/lib$(LIBRARYNAME).so
-ifndef ENABLE_OPTIMIZED
-BUILD_LIBNAME_G := $(LIBNAME_G)
+# Does the library want a .o version built?
ifndef DONT_BUILD_RELINKED
-BUILD_LIBNAME_OBJG := $(LIBNAME_OBJG)
-endif
-ifdef BUILD_ARCHIVE
-BUILD_LIBNAME_AG := $(LIBNAME_AG)
-endif
+all:: $(DESTLIBCURRENT)/$(LIBRARYNAME).o
endif
-# If optimized builds are enabled...
-ifdef ENABLE_OPTIMIZED
- ifdef ENABLE_PROFILING
- BUILD_LIBNAME_O := $(LIBNAME_P)
- ifndef DONT_BUILD_RELINKED
- BUILD_LIBNAME_OBJO := $(LIBNAME_OBJP)
- endif
- ifdef BUILD_ARCHIVE
- BUILD_LIBNAME_AO := $(LIBNAME_AP)
- endif
- else
- BUILD_LIBNAME_O := $(LIBNAME_O)
- ifndef DONT_BUILD_RELINKED
- BUILD_LIBNAME_OBJO := $(LIBNAME_OBJO)
- endif
- ifdef BUILD_ARCHIVE
- BUILD_LIBNAME_AO := $(LIBNAME_AO)
- endif
- endif
+# Does the library want an archive version built?
+ifdef BUILD_ARCHIVE
+all:: $(DESTLIBCURRENT)/lib$(LIBRARYNAME).a
endif
-all:: $(BUILD_LIBNAME_AG) $(BUILD_LIBNAME_OBJG) # Debug
-all:: $(BUILD_LIBNAME_AO) $(BUILD_LIBNAME_OBJO) # Release
-all:: $(BUILD_LIBNAME_AP) $(BUILD_LIBNAME_OBJP) # Profile
-dynamic:: $(BUILD_LIBNAME_G) $(BUILD_LIBNAME_O) $(BUILD_LIBNAME_P) # .so files
-
-$(LIBNAME_O): $(ObjectsO) $(LibSubDirs) $(LIBRELEASE)/.dir
+$(LIBNAME_O): $(ObjectsO) $(LibSubDirs) $(DESTLIBRELEASE)/.dir
@echo ======= Linking $(LIBRARYNAME) release library =======
$(VERB) $(MakeSOO) -o $@ $(ObjectsO) $(LibSubDirs) $(LibLinkOpts)
-$(LIBNAME_P): $(ObjectsP) $(LibSubDirs) $(LIBPROFILE)/.dir
+$(LIBNAME_P): $(ObjectsP) $(LibSubDirs) $(DESTLIBPROFILE)/.dir
@echo ======= Linking $(LIBRARYNAME) profile library =======
$(VERB) $(MakeSOP) -o $@ $(ObjectsP) $(LibSubDirs) $(LibLinkOpts)
-$(LIBNAME_G): $(ObjectsG) $(LibSubDirs) $(LIBDEBUG)/.dir
+$(LIBNAME_G): $(ObjectsG) $(LibSubDirs) $(DESTLIBDEBUG)/.dir
@echo ======= Linking $(LIBRARYNAME) debug library =======
$(VERB) $(MakeSO) -g -o $@ $(ObjectsG) $(LibSubDirs) $(LibLinkOpts)
-$(LIBNAME_AO): $(ObjectsO) $(LibSubDirs) $(LIBRELEASE)/.dir
+$(LIBNAME_AO): $(ObjectsO) $(LibSubDirs) $(DESTLIBRELEASE)/.dir
@echo ======= Linking $(LIBRARYNAME) release library =======
@rm -f $@
$(VERB) $(AR) $@ $(ObjectsO) $(LibSubDirs)
-$(LIBNAME_AP): $(ObjectsP) $(LibSubDirs) $(LIBPROFILE)/.dir
+$(LIBNAME_AP): $(ObjectsP) $(LibSubDirs) $(DESTLIBPROFILE)/.dir
@echo ======= Linking $(LIBRARYNAME) profile library =======
@rm -f $@
$(VERB) $(AR) $@ $(ObjectsP) $(LibSubDirs)
-$(LIBNAME_AG): $(ObjectsG) $(LibSubDirs) $(LIBDEBUG)/.dir
+$(LIBNAME_AG): $(ObjectsG) $(LibSubDirs) $(DESTLIBDEBUG)/.dir
@echo ======= Linking $(LIBRARYNAME) debug library =======
@rm -f $@
$(VERB) $(AR) $@ $(ObjectsG) $(LibSubDirs)
-$(LIBNAME_OBJO): $(ObjectsO) $(LibSubDirs) $(LIBRELEASE)/.dir
+$(LIBNAME_OBJO): $(ObjectsO) $(LibSubDirs) $(DESTLIBRELEASE)/.dir
@echo "Linking $@"
$(VERB) $(Relink) -o $@ $(ObjectsO) $(LibSubDirs)
-$(LIBNAME_OBJP): $(ObjectsP) $(LibSubDirs) $(LIBPROFILE)/.dir
+$(LIBNAME_OBJP): $(ObjectsP) $(LibSubDirs) $(DESTLIBPROFILE)/.dir
@echo "Linking $@"
$(VERB) $(Relink) -o $@ $(ObjectsP) $(LibSubDirs)
-$(LIBNAME_OBJG): $(ObjectsG) $(LibSubDirs) $(LIBDEBUG)/.dir
+$(LIBNAME_OBJG): $(ObjectsG) $(LibSubDirs) $(DESTLIBDEBUG)/.dir
@echo "Linking $@"
$(VERB) $(Relink) -o $@ $(ObjectsG) $(LibSubDirs)
ifdef TOOLNAME
# TOOLEXENAME* - These compute the output filenames to generate...
-TOOLEXENAME_G := $(BUILD_ROOT_TOP)/tools/Debug/$(TOOLNAME)
-TOOLEXENAME_O := $(BUILD_ROOT_TOP)/tools/Release/$(TOOLNAME)
-TOOLEXENAME_P := $(BUILD_ROOT_TOP)/tools/Profile/$(TOOLNAME)
-
-ifndef ENABLE_OPTIMIZED
- TOOLEXENAMES := $(TOOLEXENAME_G)
-else
- ifdef ENABLE_PROFILING
- TOOLEXENAMES := $(TOOLEXENAME_P)
- else
- TOOLEXENAMES := $(TOOLEXENAME_O)
- endif
-endif
+TOOLEXENAME_G := $(DESTTOOLDEBUG)/$(TOOLNAME)
+TOOLEXENAME_O := $(DESTTOOLRELEASE)/$(TOOLNAME)
+TOOLEXENAME_P := $(DESTTOOLPROFILE)/$(TOOLNAME)
+TOOLEXENAMES := $(DESTTOOLCURRENT)/$(TOOLNAME)
# USED_LIBS_OPTIONS - Compute the options line that add -llib1 -llib2, etc.
-USED_LIBS_OPTIONS := $(patsubst %.a.o, -l%, $(addsuffix .o, $(USEDLIBS)))
-USED_LIBS_OPTIONS_G := $(patsubst %.o, $(LIBDEBUG)/%.o, $(USED_LIBS_OPTIONS))
-USED_LIBS_OPTIONS_O := $(patsubst %.o, $(LIBRELEASE)/%.o,$(USED_LIBS_OPTIONS))
-USED_LIBS_OPTIONS_P := $(patsubst %.o, $(LIBPROFILE)/%.o,$(USED_LIBS_OPTIONS))
+PROJ_LIBS_OPTIONS := $(patsubst %.a.o, -l%, $(addsuffix .o, $(USEDLIBS)))
+PROJ_LIBS_OPTIONS_G := $(patsubst %.o, $(PROJLIBDEBUGSOURCE)/%.o, $(PROJ_LIBS_OPTIONS))
+PROJ_LIBS_OPTIONS_O := $(patsubst %.o, $(PROJLIBRELEASESOURCE)/%.o,$(PROJ_LIBS_OPTIONS))
+PROJ_LIBS_OPTIONS_P := $(patsubst %.o, $(PROJLIBPROFILESOURCE)/%.o,$(PROJ_LIBS_OPTIONS))
+
+LLVM_LIBS_OPTIONS := $(patsubst %.a.o, -l%, $(addsuffix .o, $(LLVMLIBS)))
+LLVM_LIBS_OPTIONS_G := $(patsubst %.o, $(LLVMLIBDEBUGSOURCE)/%.o, $(LLVM_LIBS_OPTIONS))
+LLVM_LIBS_OPTIONS_O := $(patsubst %.o, $(LLVMLIBRELEASESOURCE)/%.o,$(LLVM_LIBS_OPTIONS))
+LLVM_LIBS_OPTIONS_P := $(patsubst %.o, $(LLVMLIBPROFILESOURCE)/%.o,$(LLVM_LIBS_OPTIONS))
+LIB_OPTS_G := $(LLVM_LIBS_OPTIONS_G) $(PROJ_LIBS_OPTIONS_G)
+LIB_OPTS_O := $(LLVM_LIBS_OPTIONS_O) $(PROJ_LIBS_OPTIONS_O)
+LIB_OPTS_P := $(LLVM_LIBS_OPTIONS_P) $(PROJ_LIBS_OPTIONS_P)
# USED_LIB_PATHS - Compute the path of the libraries used so that tools are
# rebuilt if libraries change. This has to make sure to handle .a/.so and .o
# files seperately.
#
STATICUSEDLIBS := $(patsubst %.a.o, lib%.a, $(addsuffix .o, $(USEDLIBS)))
-USED_LIB_PATHS_G := $(addprefix $(LIBDEBUG)/, $(STATICUSEDLIBS))
-USED_LIB_PATHS_O := $(addprefix $(LIBRELEASE)/, $(STATICUSEDLIBS))
-USED_LIB_PATHS_P := $(addprefix $(LIBPROFILE)/, $(STATICUSEDLIBS))
+USED_LIB_PATHS_G := $(addprefix $(DESTLIBDEBUG)/, $(STATICUSEDLIBS))
+USED_LIB_PATHS_O := $(addprefix $(DESTLIBRELEASE)/, $(STATICUSEDLIBS))
+USED_LIB_PATHS_P := $(addprefix $(DESTLIBPROFILE)/, $(STATICUSEDLIBS))
+LINK_OPTS := $(TOOLLINKOPTS) $(PLATFORMLINKOPTS)
+
+
+
+
+
+
+# Tell make that we need to rebuild subdirectories before we can link the tool.
+# This affects things like LLI which has library subdirectories.
+$(USED_LIB_PATHS_G) $(USED_LIB_PATHS_O) $(USED_LIB_PATHS_P): \
+ $(addsuffix /.makeall, $(PARALLEL_DIRS))
all:: $(TOOLEXENAMES)
clean::
$(VERB) rm -f $(TOOLEXENAMES)
-$(TOOLEXENAME_G): $(ObjectsG) $(USED_LIB_PATHS_G) $(BUILD_ROOT_TOP)/tools/Debug/.dir
- @echo ======= Linking $(TOOLNAME) debug executable =======
- $(VERB) $(LinkG) -o $@ $(ObjectsG) $(USED_LIBS_OPTIONS_G) $(TOOLLINKOPTS)
+$(TOOLEXENAME_G): $(ObjectsG) $(USED_LIB_PATHS_G) $(DESTTOOLDEBUG)/.dir
+ @echo ======= Linking $(TOOLNAME) debug executable $(STRIP_WARN_MSG)=======
+ $(VERB) $(LinkG) -o $@ $(ObjectsG) $(LIB_OPTS_G) $(LINK_OPTS)
-$(TOOLEXENAME_O): $(ObjectsO) $(USED_LIB_PATHS_O) $(BUILD_ROOT_TOP)/tools/Release/.dir
+$(TOOLEXENAME_O): $(ObjectsO) $(USED_LIB_PATHS_O) $(DESTTOOLRELEASE)/.dir
@echo ======= Linking $(TOOLNAME) release executable =======
- $(VERB) $(LinkO) -o $@ $(ObjectsG) $(USED_LIBS_OPTIONS_O) $(TOOLLINKOPTS)
+ $(VERB) $(LinkO) -o $@ $(ObjectsO) $(LIB_OPTS_O) $(LINK_OPTS)
-$(TOOLEXENAME_P): $(ObjectsP) $(USED_LIB_PATHS_P) $(BUILD_ROOT_TOP)/tools/Profile/.dir
+$(TOOLEXENAME_P): $(ObjectsP) $(USED_LIB_PATHS_P) $(DESTTOOLPROFILE)/.dir
@echo ======= Linking $(TOOLNAME) profile executable =======
- $(VERB) $(LinkP) -o $@ $(ObjectsP) $(USED_LIBS_OPTIONS_P) $(TOOLLINKOPTS)
+ $(VERB) $(LinkP) -o $@ $(ObjectsP) $(LIB_OPTS_P) $(LINK_OPTS)
endif
#---------------------------------------------------------
-.PRECIOUS: $(BUILD_ROOT)/Depend/.dir
-.PRECIOUS: $(BUILD_ROOT)/Debug/.dir $(BUILD_ROOT)/Release/.dir
-
-# Create dependencies for the *.cpp files...
-$(BUILD_ROOT)/Depend/%.d: %.cpp $(BUILD_ROOT)/Depend/.dir
- $(VERB) $(Depend) $< | sed 's|$*\.o *|$(BUILD_ROOT)/Release/& $(BUILD_ROOT)/Profile/& $(BUILD_ROOT)/Debug/& $(BUILD_ROOT)/Depend/$(@F)|g' > $@
-
-# Create dependencies for the *.c files...
-$(BUILD_ROOT)/Depend/%.d: %.c $(BUILD_ROOT)/Depend/.dir
- $(VERB) $(DependC) $< | sed 's|$*\.o *|Release/& Profile/& Debug/& Depend/$(@F)|g' > $@
+.PRECIOUS: $(BUILD_OBJ_DIR)/Depend/.dir
+.PRECIOUS: $(BUILD_OBJ_DIR)/Debug/.dir $(BUILD_OBJ_DIR)/Release/.dir
# Create .o files in the ObjectFiles directory from the .cpp and .c files...
-$(BUILD_ROOT)/Release/%.o: %.cpp $(BUILD_ROOT)/Release/.dir
+$(BUILD_OBJ_DIR)/Release/%.o: $(SourceDir)%.cpp $(BUILD_OBJ_DIR)/Release/.dir
@echo "Compiling $<"
$(VERB) $(CompileO) $< -o $@
-$(BUILD_ROOT)/Release/%.o: %.c $(BUILD_ROOT)/Release/.dir
- $(VERB) $(CompileOC) $< -o $@
+$(BUILD_OBJ_DIR)/Release/%.o: $(SourceDir)%.c $(BUILD_OBJ_DIR)/Release/.dir
+ $(VERB) $(CompileCO) $< -o $@
-$(BUILD_ROOT)/Profile/%.o: %.cpp $(BUILD_ROOT)/Profile/.dir
+$(BUILD_OBJ_DIR)/Profile/%.o: $(SourceDir)%.cpp $(BUILD_OBJ_DIR)/Profile/.dir
@echo "Compiling $<"
$(VERB) $(CompileP) $< -o $@
-$(BUILD_ROOT)/Profile/%.o: %.c $(BUILD_ROOT)/Profile/.dir
+$(BUILD_OBJ_DIR)/Profile/%.o: $(SourceDir)%.c $(BUILD_OBJ_DIR)/Profile/.dir
@echo "Compiling $<"
$(VERB) $(CompileCP) $< -o $@
-$(BUILD_ROOT)/Debug/%.o: %.cpp $(BUILD_ROOT)/Debug/.dir
+$(BUILD_OBJ_DIR)/Debug/%.o: $(SourceDir)%.cpp $(BUILD_OBJ_DIR)/Debug/.dir
@echo "Compiling $<"
$(VERB) $(CompileG) $< -o $@
-$(BUILD_ROOT)/Debug/%.o: %.c $(BUILD_ROOT)/Debug/.dir
+$(BUILD_OBJ_DIR)/Debug/%.o: $(SourceDir)%.c $(BUILD_OBJ_DIR)/Debug/.dir
$(VERB) $(CompileCG) $< -o $@
+#
+# Rules for building lex/yacc files
+#
+LEX_FILES = $(filter %.l, $(Source))
+LEX_OUTPUT = $(LEX_FILES:%.l=%.cpp)
+YACC_FILES = $(filter %.y, $(Source))
+YACC_OUTPUT = $(addprefix $(YACC_FILES:%.y=%), .h .cpp .output)
+.PRECIOUS: $(LEX_OUTPUT) $(YACC_OUTPUT)
+
# Create a .cpp source file from a flex input file... this uses sed to cut down
# on the warnings emited by GCC...
+#
+# The last line is a gross hack to work around flex aparently not being able to
+# resize the buffer on a large token input. Currently, for uninitialized string
+# buffers in LLVM we can generate very long tokens, so this is a hack around it.
+# FIXME. (f.e. char Buffer[10000]; )
+#
%.cpp: %.l
- flex -t $< | sed '/^find_rule/d' | sed 's/void yyunput/inline void yyunput/' | sed 's/void \*yy_flex_realloc/inline void *yy_flex_realloc/' > $@
+ $(FLEX) -t $< | sed '/^find_rule/d' | \
+ sed 's/void yyunput/inline void yyunput/' | \
+ sed 's/void \*yy_flex_realloc/inline void *yy_flex_realloc/' | \
+ sed 's/#define YY_BUF_SIZE 16384/#define YY_BUF_SIZE (16384*64)/' > $@
# Rule for building the bison parsers...
-
+%.c: %.y # Cancel built-in rules for yacc
+%.h: %.y # Cancel built-in rules for yacc
%.cpp %.h : %.y
- $(VERB) $(BISON) -v -d -p $(<:%Parser.y=%) $(basename $@).y
- $(VERB) mv -f $(basename $@).tab.c $(basename $@).cpp
- $(VERB) mv -f $(basename $@).tab.h $(basename $@).h
+ @echo Bison\'ing $<...
+ $(VERB) $(BISON) -v -d -p $(<:%Parser.y=%) $*.y
+ $(VERB) mv -f $*.tab.c $*.cpp
+ $(VERB) mv -f $*.tab.h $*.h
# To create the directories...
%/.dir:
- $(VERB) mkdir -p $(@D)
+ $(VERB) mkdir -p $*
@date > $@
+# To create postscript files from dot files...
+%.ps: %.dot
+ dot -Tps < $< > $@
+
# 'make clean' nukes the tree
clean::
- $(VERB) rm -rf $(BUILD_ROOT)/Debug $(BUILD_ROOT)/Release $(BUILD_ROOT)/Profile $(BUILD_ROOT)/Depend
- $(VERB) rm -f core *.o *.d *.so *~ *.flc
+ $(VERB) rm -rf $(BUILD_OBJ_DIR)/Debug $(BUILD_OBJ_DIR)/Release $(BUILD_OBJ_DIR)/Profile $(BUILD_OBJ_DIR)/Depend
+ $(VERB) rm -f core core.[0-9][0-9]* *.o *.d *.so *~ *.flc
+ $(VERB) rm -f $(LEX_OUTPUT) $(YACC_OUTPUT)
-# If dependancies were generated for the file that included this file,
+# If dependencies were generated for the file that included this file,
# include the dependancies now...
#
-SourceDepend := $(addsuffix .d,$(addprefix $(BUILD_ROOT)/Depend/,$(basename $(filter-out Debug/%, $(Source)))))
+SourceBaseNames := $(basename $(notdir $(filter-out Debug/%, $(Source))))
+SourceDepend := $(SourceBaseNames:%=$(BUILD_OBJ_DIR)/Depend/%.d)
+
+# Create dependencies for the *.cpp files...
+#$(SourceDepend): \x
+$(BUILD_OBJ_DIR)/Depend/%.d: $(SourceDir)%.cpp $(BUILD_OBJ_DIR)/Depend/.dir
+ $(VERB) $(Depend) $< | sed 's|$*\.o *|$(BUILD_OBJ_DIR)/Release/& $(BUILD_OBJ_DIR)/Profile/& $(BUILD_OBJ_DIR)/Debug/& $(BUILD_OBJ_DIR)/Depend/$(@F)|g' > $@
+
+# Create dependencies for the *.c files...
+#$(SourceDepend): \x
+$(BUILD_OBJ_DIR)/Depend/%.d: $(SourceDir)%.c $(BUILD_OBJ_DIR)/Depend/.dir
+ $(VERB) $(DependC) $< | sed 's|$*\.o *|Release/& Profile/& Debug/& Depend/$(@F)|g' > $@
+
ifneq ($(SourceDepend),)
-include $(SourceDepend)
+-include $(SourceDepend)
endif
projects / oota-llvm.git / blobdiff