Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dma
authorLinus Torvalds <torvalds@linux-foundation.org>
Thu, 29 Mar 2012 22:34:57 +0000 (15:34 -0700)
committerLinus Torvalds <torvalds@linux-foundation.org>
Thu, 29 Mar 2012 22:34:57 +0000 (15:34 -0700)
Pull slave-dmaengine update from Vinod Koul:
 "This includes the cookie cleanup by Russell, the addition of context
  parameter for dmaengine APIs, more arm dmaengine driver cleanup by
  moving code to dmaengine, this time for imx by Javier and pl330 by
  Boojin along with the usual driver fixes."

Fix up some fairly trivial conflicts with various other cleanups.

* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (67 commits)
  dmaengine: imx: fix the build failure on x86_64
  dmaengine: i.MX: Fix merge of cookie branch.
  dmaengine: i.MX: Add support for interleaved transfers.
  dmaengine: imx-dma: use 'dev_dbg' and 'dev_warn' for messages.
  dmaengine: imx-dma: remove 'imx_dmav1_baseaddr' and 'dma_clk'.
  dmaengine: imx-dma: remove unused arg of imxdma_sg_next.
  dmaengine: imx-dma: remove internal structure.
  dmaengine: imx-dma: remove 'resbytes' field of 'internal' structure.
  dmaengine: imx-dma: remove 'in_use' field of 'internal' structure.
  dmaengine: imx-dma: remove sg member from internal structure.
  dmaengine: imx-dma: remove 'imxdma_setup_sg_hw' function.
  dmaengine: imx-dma: remove 'imxdma_config_channel_hw' function.
  dmaengine: imx-dma: remove 'imxdma_setup_mem2mem_hw' function.
  dmaengine: imx-dma: remove dma_mode member of internal structure.
  dmaengine: imx-dma: remove data member from internal structure.
  dmaengine: imx-dma: merge old dma-v1.c with imx-dma.c
  dmaengine: at_hdmac: add slave config operation
  dmaengine: add context parameter to prep_slave_sg and prep_dma_cyclic
  dmaengine/dma_slave: introduce inline wrappers
  dma: imx-sdma: Treat firmware messages as warnings instead of erros
  ...

26 files changed:
1  2 
arch/arm/common/Kconfig
arch/arm/common/Makefile
arch/arm/mach-at91/at91sam9g45_devices.c
arch/arm/mach-imx/Kconfig
arch/arm/mach-imx/Makefile
arch/arm/plat-samsung/dma-ops.c
arch/avr32/mach-at32ap/at32ap700x.c
drivers/dma/Kconfig
drivers/dma/imx-dma.c
drivers/dma/imx-sdma.c
drivers/dma/iop-adma.c
drivers/dma/pl330.c
drivers/mmc/host/atmel-mci.c
drivers/mmc/host/mmci.c
drivers/mmc/host/sh_mmcif.c
drivers/mmc/host/tmio_mmc_dma.c
drivers/mtd/nand/gpmi-nand/gpmi-lib.c
drivers/net/ethernet/micrel/ks8842.c
drivers/spi/spi-pl022.c
drivers/spi/spi-topcliff-pch.c
drivers/tty/serial/amba-pl011.c
drivers/tty/serial/pch_uart.c
drivers/tty/serial/sh-sci.c
drivers/usb/renesas_usbhs/fifo.c
include/linux/dmaengine.h
sound/soc/imx/imx-pcm-dma-mx2.c

Simple merge
Simple merge
index 52359f80c42d1b2e2bbe06fc93d1e72d389649e3,3da1421c944f058e2d8aeaafd2050a03b678de4f..7561eca131b0ba989c42afb1a5ec94fbce98f688
@@@ -46,7 -30,7 +42,6 @@@ config SOC_IMX2
        bool
        select MACH_MX21
        select CPU_ARM926T
-       select IMX_HAVE_DMA_V1
 -      select ARCH_MXC_AUDMUX_V1
        select IMX_HAVE_IOMUX_V1
        select MXC_AVIC
  
@@@ -61,7 -46,7 +56,6 @@@ config SOC_IMX2
        bool
        select MACH_MX27
        select CPU_ARM926T
-       select IMX_HAVE_DMA_V1
 -      select ARCH_MXC_AUDMUX_V1
        select IMX_HAVE_IOMUX_V1
        select MXC_AVIC
  
Simple merge
Simple merge
Simple merge
Simple merge
Simple merge
Simple merge
Simple merge
index 16b66c827f19984c47401b89d70338570c446f18,87d752a77f5e0395d3ed4426de1ee9f2657e38e8..282caf118be819c5e9257754a369efd292607951
   * (at your option) any later version.
   */
  
- #include <linux/io.h>
- #include <linux/init.h>
- #include <linux/slab.h>
- #include <linux/module.h>
- #include <linux/dmaengine.h>
- #include <linux/interrupt.h>
- #include <linux/amba/bus.h>
- #include <linux/amba/pl330.h>
- #include <linux/pm_runtime.h>
- #include <linux/scatterlist.h>
- #include <linux/of.h>
+ #include <linux/kernel.h>
+ #include <linux/io.h>
+ #include <linux/init.h>
+ #include <linux/slab.h>
+ #include <linux/module.h>
+ #include <linux/string.h>
+ #include <linux/delay.h>
+ #include <linux/interrupt.h>
+ #include <linux/dma-mapping.h>
+ #include <linux/dmaengine.h>
+ #include <linux/interrupt.h>
+ #include <linux/amba/bus.h>
+ #include <linux/amba/pl330.h>
+ #include <linux/pm_runtime.h>
+ #include <linux/scatterlist.h>
+ #include <linux/of.h>
+ #include "dmaengine.h"
+ #define PL330_MAX_CHAN                8
+ #define PL330_MAX_IRQS                32
+ #define PL330_MAX_PERI                32
+ enum pl330_srccachectrl {
+       SCCTRL0,        /* Noncacheable and nonbufferable */
+       SCCTRL1,        /* Bufferable only */
+       SCCTRL2,        /* Cacheable, but do not allocate */
+       SCCTRL3,        /* Cacheable and bufferable, but do not allocate */
+       SINVALID1,
+       SINVALID2,
+       SCCTRL6,        /* Cacheable write-through, allocate on reads only */
+       SCCTRL7,        /* Cacheable write-back, allocate on reads only */
+ };
+ enum pl330_dstcachectrl {
+       DCCTRL0,        /* Noncacheable and nonbufferable */
+       DCCTRL1,        /* Bufferable only */
+       DCCTRL2,        /* Cacheable, but do not allocate */
+       DCCTRL3,        /* Cacheable and bufferable, but do not allocate */
 -      DINVALID1 = 8,
++      DINVALID1,      /* AWCACHE = 0x1000 */
+       DINVALID2,
+       DCCTRL6,        /* Cacheable write-through, allocate on writes only */
+       DCCTRL7,        /* Cacheable write-back, allocate on writes only */
+ };
+ enum pl330_byteswap {
+       SWAP_NO,
+       SWAP_2,
+       SWAP_4,
+       SWAP_8,
+       SWAP_16,
+ };
+ enum pl330_reqtype {
+       MEMTOMEM,
+       MEMTODEV,
+       DEVTOMEM,
+       DEVTODEV,
+ };
+ /* Register and Bit field Definitions */
+ #define DS                    0x0
+ #define DS_ST_STOP            0x0
+ #define DS_ST_EXEC            0x1
+ #define DS_ST_CMISS           0x2
+ #define DS_ST_UPDTPC          0x3
+ #define DS_ST_WFE             0x4
+ #define DS_ST_ATBRR           0x5
+ #define DS_ST_QBUSY           0x6
+ #define DS_ST_WFP             0x7
+ #define DS_ST_KILL            0x8
+ #define DS_ST_CMPLT           0x9
+ #define DS_ST_FLTCMP          0xe
+ #define DS_ST_FAULT           0xf
+ #define DPC                   0x4
+ #define INTEN                 0x20
+ #define ES                    0x24
+ #define INTSTATUS             0x28
+ #define INTCLR                        0x2c
+ #define FSM                   0x30
+ #define FSC                   0x34
+ #define FTM                   0x38
+ #define _FTC                  0x40
+ #define FTC(n)                        (_FTC + (n)*0x4)
+ #define _CS                   0x100
+ #define CS(n)                 (_CS + (n)*0x8)
+ #define CS_CNS                        (1 << 21)
+ #define _CPC                  0x104
+ #define CPC(n)                        (_CPC + (n)*0x8)
+ #define _SA                   0x400
+ #define SA(n)                 (_SA + (n)*0x20)
+ #define _DA                   0x404
+ #define DA(n)                 (_DA + (n)*0x20)
+ #define _CC                   0x408
+ #define CC(n)                 (_CC + (n)*0x20)
+ #define CC_SRCINC             (1 << 0)
+ #define CC_DSTINC             (1 << 14)
+ #define CC_SRCPRI             (1 << 8)
+ #define CC_DSTPRI             (1 << 22)
+ #define CC_SRCNS              (1 << 9)
+ #define CC_DSTNS              (1 << 23)
+ #define CC_SRCIA              (1 << 10)
+ #define CC_DSTIA              (1 << 24)
+ #define CC_SRCBRSTLEN_SHFT    4
+ #define CC_DSTBRSTLEN_SHFT    18
+ #define CC_SRCBRSTSIZE_SHFT   1
+ #define CC_DSTBRSTSIZE_SHFT   15
+ #define CC_SRCCCTRL_SHFT      11
+ #define CC_SRCCCTRL_MASK      0x7
+ #define CC_DSTCCTRL_SHFT      25
+ #define CC_DRCCCTRL_MASK      0x7
+ #define CC_SWAP_SHFT          28
+ #define _LC0                  0x40c
+ #define LC0(n)                        (_LC0 + (n)*0x20)
+ #define _LC1                  0x410
+ #define LC1(n)                        (_LC1 + (n)*0x20)
+ #define DBGSTATUS             0xd00
+ #define DBG_BUSY              (1 << 0)
+ #define DBGCMD                        0xd04
+ #define DBGINST0              0xd08
+ #define DBGINST1              0xd0c
+ #define CR0                   0xe00
+ #define CR1                   0xe04
+ #define CR2                   0xe08
+ #define CR3                   0xe0c
+ #define CR4                   0xe10
+ #define CRD                   0xe14
+ #define PERIPH_ID             0xfe0
+ #define PERIPH_REV_SHIFT      20
+ #define PERIPH_REV_MASK               0xf
+ #define PERIPH_REV_R0P0               0
+ #define PERIPH_REV_R1P0               1
+ #define PERIPH_REV_R1P1               2
+ #define PCELL_ID              0xff0
+ #define CR0_PERIPH_REQ_SET    (1 << 0)
+ #define CR0_BOOT_EN_SET               (1 << 1)
+ #define CR0_BOOT_MAN_NS               (1 << 2)
+ #define CR0_NUM_CHANS_SHIFT   4
+ #define CR0_NUM_CHANS_MASK    0x7
+ #define CR0_NUM_PERIPH_SHIFT  12
+ #define CR0_NUM_PERIPH_MASK   0x1f
+ #define CR0_NUM_EVENTS_SHIFT  17
+ #define CR0_NUM_EVENTS_MASK   0x1f
+ #define CR1_ICACHE_LEN_SHIFT  0
+ #define CR1_ICACHE_LEN_MASK   0x7
+ #define CR1_NUM_ICACHELINES_SHIFT     4
+ #define CR1_NUM_ICACHELINES_MASK      0xf
+ #define CRD_DATA_WIDTH_SHIFT  0
+ #define CRD_DATA_WIDTH_MASK   0x7
+ #define CRD_WR_CAP_SHIFT      4
+ #define CRD_WR_CAP_MASK               0x7
+ #define CRD_WR_Q_DEP_SHIFT    8
+ #define CRD_WR_Q_DEP_MASK     0xf
+ #define CRD_RD_CAP_SHIFT      12
+ #define CRD_RD_CAP_MASK               0x7
+ #define CRD_RD_Q_DEP_SHIFT    16
+ #define CRD_RD_Q_DEP_MASK     0xf
+ #define CRD_DATA_BUFF_SHIFT   20
+ #define CRD_DATA_BUFF_MASK    0x3ff
+ #define PART                  0x330
+ #define DESIGNER              0x41
+ #define REVISION              0x0
+ #define INTEG_CFG             0x0
+ #define PERIPH_ID_VAL         ((PART << 0) | (DESIGNER << 12))
+ #define PCELL_ID_VAL          0xb105f00d
+ #define PL330_STATE_STOPPED           (1 << 0)
+ #define PL330_STATE_EXECUTING         (1 << 1)
+ #define PL330_STATE_WFE                       (1 << 2)
+ #define PL330_STATE_FAULTING          (1 << 3)
+ #define PL330_STATE_COMPLETING                (1 << 4)
+ #define PL330_STATE_WFP                       (1 << 5)
+ #define PL330_STATE_KILLING           (1 << 6)
+ #define PL330_STATE_FAULT_COMPLETING  (1 << 7)
+ #define PL330_STATE_CACHEMISS         (1 << 8)
+ #define PL330_STATE_UPDTPC            (1 << 9)
+ #define PL330_STATE_ATBARRIER         (1 << 10)
+ #define PL330_STATE_QUEUEBUSY         (1 << 11)
+ #define PL330_STATE_INVALID           (1 << 15)
+ #define PL330_STABLE_STATES (PL330_STATE_STOPPED | PL330_STATE_EXECUTING \
+                               | PL330_STATE_WFE | PL330_STATE_FAULTING)
+ #define CMD_DMAADDH           0x54
+ #define CMD_DMAEND            0x00
+ #define CMD_DMAFLUSHP         0x35
+ #define CMD_DMAGO             0xa0
+ #define CMD_DMALD             0x04
+ #define CMD_DMALDP            0x25
+ #define CMD_DMALP             0x20
+ #define CMD_DMALPEND          0x28
+ #define CMD_DMAKILL           0x01
+ #define CMD_DMAMOV            0xbc
+ #define CMD_DMANOP            0x18
+ #define CMD_DMARMB            0x12
+ #define CMD_DMASEV            0x34
+ #define CMD_DMAST             0x08
+ #define CMD_DMASTP            0x29
+ #define CMD_DMASTZ            0x0c
+ #define CMD_DMAWFE            0x36
+ #define CMD_DMAWFP            0x30
+ #define CMD_DMAWMB            0x13
+ #define SZ_DMAADDH            3
+ #define SZ_DMAEND             1
+ #define SZ_DMAFLUSHP          2
+ #define SZ_DMALD              1
+ #define SZ_DMALDP             2
+ #define SZ_DMALP              2
+ #define SZ_DMALPEND           2
+ #define SZ_DMAKILL            1
+ #define SZ_DMAMOV             6
+ #define SZ_DMANOP             1
+ #define SZ_DMARMB             1
+ #define SZ_DMASEV             2
+ #define SZ_DMAST              1
+ #define SZ_DMASTP             2
+ #define SZ_DMASTZ             1
+ #define SZ_DMAWFE             2
+ #define SZ_DMAWFP             2
+ #define SZ_DMAWMB             1
+ #define SZ_DMAGO              6
+ #define BRST_LEN(ccr)         ((((ccr) >> CC_SRCBRSTLEN_SHFT) & 0xf) + 1)
+ #define BRST_SIZE(ccr)                (1 << (((ccr) >> CC_SRCBRSTSIZE_SHFT) & 0x7))
+ #define BYTE_TO_BURST(b, ccr) ((b) / BRST_SIZE(ccr) / BRST_LEN(ccr))
+ #define BURST_TO_BYTE(c, ccr) ((c) * BRST_SIZE(ccr) * BRST_LEN(ccr))
+ /*
+  * With 256 bytes, we can do more than 2.5MB and 5MB xfers per req
+  * at 1byte/burst for P<->M and M<->M respectively.
+  * For typical scenario, at 1word/burst, 10MB and 20MB xfers per req
+  * should be enough for P<->M and M<->M respectively.
+  */
+ #define MCODE_BUFF_PER_REQ    256
+ /* If the _pl330_req is available to the client */
+ #define IS_FREE(req)  (*((u8 *)((req)->mc_cpu)) == CMD_DMAEND)
+ /* Use this _only_ to wait on transient states */
+ #define UNTIL(t, s)   while (!(_state(t) & (s))) cpu_relax();
+ #ifdef PL330_DEBUG_MCGEN
+ static unsigned cmd_line;
+ #define PL330_DBGCMD_DUMP(off, x...)  do { \
+                                               printk("%x:", cmd_line); \
+                                               printk(x); \
+                                               cmd_line += off; \
+                                       } while (0)
+ #define PL330_DBGMC_START(addr)               (cmd_line = addr)
+ #else
+ #define PL330_DBGCMD_DUMP(off, x...)  do {} while (0)
+ #define PL330_DBGMC_START(addr)               do {} while (0)
+ #endif
+ /* The number of default descriptors */
+ #define NR_DEFAULT_DESC       16
+ /* Populated by the PL330 core driver for DMA API driver's info */
+ struct pl330_config {
+       u32     periph_id;
+       u32     pcell_id;
+ #define DMAC_MODE_NS  (1 << 0)
+       unsigned int    mode;
+       unsigned int    data_bus_width:10; /* In number of bits */
+       unsigned int    data_buf_dep:10;
+       unsigned int    num_chan:4;
+       unsigned int    num_peri:6;
+       u32             peri_ns;
+       unsigned int    num_events:6;
+       u32             irq_ns;
+ };
+ /* Handle to the DMAC provided to the PL330 core */
+ struct pl330_info {
+       /* Owning device */
+       struct device *dev;
+       /* Size of MicroCode buffers for each channel. */
+       unsigned mcbufsz;
+       /* ioremap'ed address of PL330 registers. */
+       void __iomem    *base;
+       /* Client can freely use it. */
+       void    *client_data;
+       /* PL330 core data, Client must not touch it. */
+       void    *pl330_data;
+       /* Populated by the PL330 core driver during pl330_add */
+       struct pl330_config     pcfg;
+       /*
+        * If the DMAC has some reset mechanism, then the
+        * client may want to provide pointer to the method.
+        */
+       void (*dmac_reset)(struct pl330_info *pi);
+ };
+ /**
+  * Request Configuration.
+  * The PL330 core does not modify this and uses the last
+  * working configuration if the request doesn't provide any.
+  *
+  * The Client may want to provide this info only for the
+  * first request and a request with new settings.
+  */
+ struct pl330_reqcfg {
+       /* Address Incrementing */
+       unsigned dst_inc:1;
+       unsigned src_inc:1;
+       /*
+        * For now, the SRC & DST protection levels
+        * and burst size/length are assumed same.
+        */
+       bool nonsecure;
+       bool privileged;
+       bool insnaccess;
+       unsigned brst_len:5;
+       unsigned brst_size:3; /* in power of 2 */
+       enum pl330_dstcachectrl dcctl;
+       enum pl330_srccachectrl scctl;
+       enum pl330_byteswap swap;
+       struct pl330_config *pcfg;
+ };
+ /*
+  * One cycle of DMAC operation.
+  * There may be more than one xfer in a request.
+  */
+ struct pl330_xfer {
+       u32 src_addr;
+       u32 dst_addr;
+       /* Size to xfer */
+       u32 bytes;
+       /*
+        * Pointer to next xfer in the list.
+        * The last xfer in the req must point to NULL.
+        */
+       struct pl330_xfer *next;
+ };
+ /* The xfer callbacks are made with one of these arguments. */
+ enum pl330_op_err {
+       /* The all xfers in the request were success. */
+       PL330_ERR_NONE,
+       /* If req aborted due to global error. */
+       PL330_ERR_ABORT,
+       /* If req failed due to problem with Channel. */
+       PL330_ERR_FAIL,
+ };
+ /* A request defining Scatter-Gather List ending with NULL xfer. */
+ struct pl330_req {
+       enum pl330_reqtype rqtype;
+       /* Index of peripheral for the xfer. */
+       unsigned peri:5;
+       /* Unique token for this xfer, set by the client. */
+       void *token;
+       /* Callback to be called after xfer. */
+       void (*xfer_cb)(void *token, enum pl330_op_err err);
+       /* If NULL, req will be done at last set parameters. */
+       struct pl330_reqcfg *cfg;
+       /* Pointer to first xfer in the request. */
+       struct pl330_xfer *x;
+ };
+ /*
+  * To know the status of the channel and DMAC, the client
+  * provides a pointer to this structure. The PL330 core
+  * fills it with current information.
+  */
+ struct pl330_chanstatus {
+       /*
+        * If the DMAC engine halted due to some error,
+        * the client should remove-add DMAC.
+        */
+       bool dmac_halted;
+       /*
+        * If channel is halted due to some error,
+        * the client should ABORT/FLUSH and START the channel.
+        */
+       bool faulting;
+       /* Location of last load */
+       u32 src_addr;
+       /* Location of last store */
+       u32 dst_addr;
+       /*
+        * Pointer to the currently active req, NULL if channel is
+        * inactive, even though the requests may be present.
+        */
+       struct pl330_req *top_req;
+       /* Pointer to req waiting second in the queue if any. */
+       struct pl330_req *wait_req;
+ };
+ enum pl330_chan_op {
+       /* Start the channel */
+       PL330_OP_START,
+       /* Abort the active xfer */
+       PL330_OP_ABORT,
+       /* Stop xfer and flush queue */
+       PL330_OP_FLUSH,
+ };
+ struct _xfer_spec {
+       u32 ccr;
+       struct pl330_req *r;
+       struct pl330_xfer *x;
+ };
+ enum dmamov_dst {
+       SAR = 0,
+       CCR,
+       DAR,
+ };
+ enum pl330_dst {
+       SRC = 0,
+       DST,
+ };
+ enum pl330_cond {
+       SINGLE,
+       BURST,
+       ALWAYS,
+ };
+ struct _pl330_req {
+       u32 mc_bus;
+       void *mc_cpu;
+       /* Number of bytes taken to setup MC for the req */
+       u32 mc_len;
+       struct pl330_req *r;
+       /* Hook to attach to DMAC's list of reqs with due callback */
+       struct list_head rqd;
+ };
+ /* ToBeDone for tasklet */
+ struct _pl330_tbd {
+       bool reset_dmac;
+       bool reset_mngr;
+       u8 reset_chan;
+ };
+ /* A DMAC Thread */
+ struct pl330_thread {
+       u8 id;
+       int ev;
+       /* If the channel is not yet acquired by any client */
+       bool free;
+       /* Parent DMAC */
+       struct pl330_dmac *dmac;
+       /* Only two at a time */
+       struct _pl330_req req[2];
+       /* Index of the last enqueued request */
+       unsigned lstenq;
+       /* Index of the last submitted request or -1 if the DMA is stopped */
+       int req_running;
+ };
+ enum pl330_dmac_state {
+       UNINIT,
+       INIT,
+       DYING,
+ };
+ /* A DMAC */
+ struct pl330_dmac {
+       spinlock_t              lock;
+       /* Holds list of reqs with due callbacks */
+       struct list_head        req_done;
+       /* Pointer to platform specific stuff */
+       struct pl330_info       *pinfo;
+       /* Maximum possible events/irqs */
+       int                     events[32];
+       /* BUS address of MicroCode buffer */
+       u32                     mcode_bus;
+       /* CPU address of MicroCode buffer */
+       void                    *mcode_cpu;
+       /* List of all Channel threads */
+       struct pl330_thread     *channels;
+       /* Pointer to the MANAGER thread */
+       struct pl330_thread     *manager;
+       /* To handle bad news in interrupt */
+       struct tasklet_struct   tasks;
+       struct _pl330_tbd       dmac_tbd;
+       /* State of DMAC operation */
+       enum pl330_dmac_state   state;
+ };
+ enum desc_status {
+       /* In the DMAC pool */
+       FREE,
+       /*
+        * Allocted to some channel during prep_xxx
+        * Also may be sitting on the work_list.
+        */
+       PREP,
+       /*
+        * Sitting on the work_list and already submitted
+        * to the PL330 core. Not more than two descriptors
+        * of a channel can be BUSY at any time.
+        */
+       BUSY,
+       /*
+        * Sitting on the channel work_list but xfer done
+        * by PL330 core
+        */
+       DONE,
+ };
+ struct dma_pl330_chan {
+       /* Schedule desc completion */
+       struct tasklet_struct task;
+       /* DMA-Engine Channel */
+       struct dma_chan chan;
+       /* List of to be xfered descriptors */
+       struct list_head work_list;
+       /* Pointer to the DMAC that manages this channel,
+        * NULL if the channel is available to be acquired.
+        * As the parent, this DMAC also provides descriptors
+        * to the channel.
+        */
+       struct dma_pl330_dmac *dmac;
+       /* To protect channel manipulation */
+       spinlock_t lock;
+       /* Token of a hardware channel thread of PL330 DMAC
+        * NULL if the channel is available to be acquired.
+        */
+       void *pl330_chid;
+       /* For D-to-M and M-to-D channels */
+       int burst_sz; /* the peripheral fifo width */
+       int burst_len; /* the number of burst */
+       dma_addr_t fifo_addr;
+       /* for cyclic capability */
+       bool cyclic;
+ };
+ struct dma_pl330_dmac {
+       struct pl330_info pif;
+       /* DMA-Engine Device */
+       struct dma_device ddma;
+       /* Pool of descriptors available for the DMAC's channels */
+       struct list_head desc_pool;
+       /* To protect desc_pool manipulation */
+       spinlock_t pool_lock;
+       /* Peripheral channels connected to this DMAC */
+       struct dma_pl330_chan *peripherals; /* keep at end */
+       struct clk *clk;
+ };
+ struct dma_pl330_desc {
+       /* To attach to a queue as child */
+       struct list_head node;
+       /* Descriptor for the DMA Engine API */
+       struct dma_async_tx_descriptor txd;
+       /* Xfer for PL330 core */
+       struct pl330_xfer px;
+       struct pl330_reqcfg rqcfg;
+       struct pl330_req req;
+       enum desc_status status;
+       /* The channel which currently holds this desc */
+       struct dma_pl330_chan *pchan;
+ };
+ static inline void _callback(struct pl330_req *r, enum pl330_op_err err)
+ {
+       if (r && r->xfer_cb)
+               r->xfer_cb(r->token, err);
+ }
+ static inline bool _queue_empty(struct pl330_thread *thrd)
+ {
+       return (IS_FREE(&thrd->req[0]) && IS_FREE(&thrd->req[1]))
+               ? true : false;
+ }
+ static inline bool _queue_full(struct pl330_thread *thrd)
+ {
+       return (IS_FREE(&thrd->req[0]) || IS_FREE(&thrd->req[1]))
+               ? false : true;
+ }
+ static inline bool is_manager(struct pl330_thread *thrd)
+ {
+       struct pl330_dmac *pl330 = thrd->dmac;
+       /* MANAGER is indexed at the end */
+       if (thrd->id == pl330->pinfo->pcfg.num_chan)
+               return true;
+       else
+               return false;
+ }
+ /* If manager of the thread is in Non-Secure mode */
+ static inline bool _manager_ns(struct pl330_thread *thrd)
+ {
+       struct pl330_dmac *pl330 = thrd->dmac;
+       return (pl330->pinfo->pcfg.mode & DMAC_MODE_NS) ? true : false;
+ }
+ static inline u32 get_id(struct pl330_info *pi, u32 off)
+ {
+       void __iomem *regs = pi->base;
+       u32 id = 0;
+       id |= (readb(regs + off + 0x0) << 0);
+       id |= (readb(regs + off + 0x4) << 8);
+       id |= (readb(regs + off + 0x8) << 16);
+       id |= (readb(regs + off + 0xc) << 24);
+       return id;
+ }
+ static inline u32 get_revision(u32 periph_id)
+ {
+       return (periph_id >> PERIPH_REV_SHIFT) & PERIPH_REV_MASK;
+ }
+ static inline u32 _emit_ADDH(unsigned dry_run, u8 buf[],
+               enum pl330_dst da, u16 val)
+ {
+       if (dry_run)
+               return SZ_DMAADDH;
+       buf[0] = CMD_DMAADDH;
+       buf[0] |= (da << 1);
+       *((u16 *)&buf[1]) = val;
+       PL330_DBGCMD_DUMP(SZ_DMAADDH, "\tDMAADDH %s %u\n",
+               da == 1 ? "DA" : "SA", val);
+       return SZ_DMAADDH;
+ }
+ static inline u32 _emit_END(unsigned dry_run, u8 buf[])
+ {
+       if (dry_run)
+               return SZ_DMAEND;
+       buf[0] = CMD_DMAEND;
+       PL330_DBGCMD_DUMP(SZ_DMAEND, "\tDMAEND\n");
+       return SZ_DMAEND;
+ }
+ static inline u32 _emit_FLUSHP(unsigned dry_run, u8 buf[], u8 peri)
+ {
+       if (dry_run)
+               return SZ_DMAFLUSHP;
+       buf[0] = CMD_DMAFLUSHP;
+       peri &= 0x1f;
+       peri <<= 3;
+       buf[1] = peri;
+       PL330_DBGCMD_DUMP(SZ_DMAFLUSHP, "\tDMAFLUSHP %u\n", peri >> 3);
+       return SZ_DMAFLUSHP;
+ }
+ static inline u32 _emit_LD(unsigned dry_run, u8 buf[],        enum pl330_cond cond)
+ {
+       if (dry_run)
+               return SZ_DMALD;
+       buf[0] = CMD_DMALD;
+       if (cond == SINGLE)
+               buf[0] |= (0 << 1) | (1 << 0);
+       else if (cond == BURST)
+               buf[0] |= (1 << 1) | (1 << 0);
+       PL330_DBGCMD_DUMP(SZ_DMALD, "\tDMALD%c\n",
+               cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'));
+       return SZ_DMALD;
+ }
+ static inline u32 _emit_LDP(unsigned dry_run, u8 buf[],
+               enum pl330_cond cond, u8 peri)
+ {
+       if (dry_run)
+               return SZ_DMALDP;
+       buf[0] = CMD_DMALDP;
+       if (cond == BURST)
+               buf[0] |= (1 << 1);
+       peri &= 0x1f;
+       peri <<= 3;
+       buf[1] = peri;
+       PL330_DBGCMD_DUMP(SZ_DMALDP, "\tDMALDP%c %u\n",
+               cond == SINGLE ? 'S' : 'B', peri >> 3);
+       return SZ_DMALDP;
+ }
+ static inline u32 _emit_LP(unsigned dry_run, u8 buf[],
+               unsigned loop, u8 cnt)
+ {
+       if (dry_run)
+               return SZ_DMALP;
+       buf[0] = CMD_DMALP;
+       if (loop)
+               buf[0] |= (1 << 1);
+       cnt--; /* DMAC increments by 1 internally */
+       buf[1] = cnt;
+       PL330_DBGCMD_DUMP(SZ_DMALP, "\tDMALP_%c %u\n", loop ? '1' : '0', cnt);
+       return SZ_DMALP;
+ }
+ struct _arg_LPEND {
+       enum pl330_cond cond;
+       bool forever;
+       unsigned loop;
+       u8 bjump;
+ };
+ static inline u32 _emit_LPEND(unsigned dry_run, u8 buf[],
+               const struct _arg_LPEND *arg)
+ {
+       enum pl330_cond cond = arg->cond;
+       bool forever = arg->forever;
+       unsigned loop = arg->loop;
+       u8 bjump = arg->bjump;
+       if (dry_run)
+               return SZ_DMALPEND;
+       buf[0] = CMD_DMALPEND;
+       if (loop)
+               buf[0] |= (1 << 2);
+       if (!forever)
+               buf[0] |= (1 << 4);
+       if (cond == SINGLE)
+               buf[0] |= (0 << 1) | (1 << 0);
+       else if (cond == BURST)
+               buf[0] |= (1 << 1) | (1 << 0);
+       buf[1] = bjump;
+       PL330_DBGCMD_DUMP(SZ_DMALPEND, "\tDMALP%s%c_%c bjmpto_%x\n",
+                       forever ? "FE" : "END",
+                       cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'),
+                       loop ? '1' : '0',
+                       bjump);
+       return SZ_DMALPEND;
+ }
+ static inline u32 _emit_KILL(unsigned dry_run, u8 buf[])
+ {
+       if (dry_run)
+               return SZ_DMAKILL;
+       buf[0] = CMD_DMAKILL;
+       return SZ_DMAKILL;
+ }
+ static inline u32 _emit_MOV(unsigned dry_run, u8 buf[],
+               enum dmamov_dst dst, u32 val)
+ {
+       if (dry_run)
+               return SZ_DMAMOV;
+       buf[0] = CMD_DMAMOV;
+       buf[1] = dst;
+       *((u32 *)&buf[2]) = val;
+       PL330_DBGCMD_DUMP(SZ_DMAMOV, "\tDMAMOV %s 0x%x\n",
+               dst == SAR ? "SAR" : (dst == DAR ? "DAR" : "CCR"), val);
+       return SZ_DMAMOV;
+ }
+ static inline u32 _emit_NOP(unsigned dry_run, u8 buf[])
+ {
+       if (dry_run)
+               return SZ_DMANOP;
+       buf[0] = CMD_DMANOP;
+       PL330_DBGCMD_DUMP(SZ_DMANOP, "\tDMANOP\n");
+       return SZ_DMANOP;
+ }
+ static inline u32 _emit_RMB(unsigned dry_run, u8 buf[])
+ {
+       if (dry_run)
+               return SZ_DMARMB;
+       buf[0] = CMD_DMARMB;
+       PL330_DBGCMD_DUMP(SZ_DMARMB, "\tDMARMB\n");
+       return SZ_DMARMB;
+ }
+ static inline u32 _emit_SEV(unsigned dry_run, u8 buf[], u8 ev)
+ {
+       if (dry_run)
+               return SZ_DMASEV;
+       buf[0] = CMD_DMASEV;
+       ev &= 0x1f;
+       ev <<= 3;
+       buf[1] = ev;
+       PL330_DBGCMD_DUMP(SZ_DMASEV, "\tDMASEV %u\n", ev >> 3);
+       return SZ_DMASEV;
+ }
+ static inline u32 _emit_ST(unsigned dry_run, u8 buf[], enum pl330_cond cond)
+ {
+       if (dry_run)
+               return SZ_DMAST;
+       buf[0] = CMD_DMAST;
+       if (cond == SINGLE)
+               buf[0] |= (0 << 1) | (1 << 0);
+       else if (cond == BURST)
+               buf[0] |= (1 << 1) | (1 << 0);
+       PL330_DBGCMD_DUMP(SZ_DMAST, "\tDMAST%c\n",
+               cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'));
+       return SZ_DMAST;
+ }
+ static inline u32 _emit_STP(unsigned dry_run, u8 buf[],
+               enum pl330_cond cond, u8 peri)
+ {
+       if (dry_run)
+               return SZ_DMASTP;
+       buf[0] = CMD_DMASTP;
+       if (cond == BURST)
+               buf[0] |= (1 << 1);
+       peri &= 0x1f;
+       peri <<= 3;
+       buf[1] = peri;
+       PL330_DBGCMD_DUMP(SZ_DMASTP, "\tDMASTP%c %u\n",
+               cond == SINGLE ? 'S' : 'B', peri >> 3);
+       return SZ_DMASTP;
+ }
+ static inline u32 _emit_STZ(unsigned dry_run, u8 buf[])
+ {
+       if (dry_run)
+               return SZ_DMASTZ;
+       buf[0] = CMD_DMASTZ;
+       PL330_DBGCMD_DUMP(SZ_DMASTZ, "\tDMASTZ\n");
+       return SZ_DMASTZ;
+ }
+ static inline u32 _emit_WFE(unsigned dry_run, u8 buf[], u8 ev,
+               unsigned invalidate)
+ {
+       if (dry_run)
+               return SZ_DMAWFE;
+       buf[0] = CMD_DMAWFE;
+       ev &= 0x1f;
+       ev <<= 3;
+       buf[1] = ev;
+       if (invalidate)
+               buf[1] |= (1 << 1);
+       PL330_DBGCMD_DUMP(SZ_DMAWFE, "\tDMAWFE %u%s\n",
+               ev >> 3, invalidate ? ", I" : "");
+       return SZ_DMAWFE;
+ }
+ static inline u32 _emit_WFP(unsigned dry_run, u8 buf[],
+               enum pl330_cond cond, u8 peri)
+ {
+       if (dry_run)
+               return SZ_DMAWFP;
+       buf[0] = CMD_DMAWFP;
+       if (cond == SINGLE)
+               buf[0] |= (0 << 1) | (0 << 0);
+       else if (cond == BURST)
+               buf[0] |= (1 << 1) | (0 << 0);
+       else
+               buf[0] |= (0 << 1) | (1 << 0);
+       peri &= 0x1f;
+       peri <<= 3;
+       buf[1] = peri;
+       PL330_DBGCMD_DUMP(SZ_DMAWFP, "\tDMAWFP%c %u\n",
+               cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'P'), peri >> 3);
+       return SZ_DMAWFP;
+ }
+ static inline u32 _emit_WMB(unsigned dry_run, u8 buf[])
+ {
+       if (dry_run)
+               return SZ_DMAWMB;
+       buf[0] = CMD_DMAWMB;
+       PL330_DBGCMD_DUMP(SZ_DMAWMB, "\tDMAWMB\n");
+       return SZ_DMAWMB;
+ }
+ struct _arg_GO {
+       u8 chan;
+       u32 addr;
+       unsigned ns;
+ };
+ static inline u32 _emit_GO(unsigned dry_run, u8 buf[],
+               const struct _arg_GO *arg)
+ {
+       u8 chan = arg->chan;
+       u32 addr = arg->addr;
+       unsigned ns = arg->ns;
+       if (dry_run)
+               return SZ_DMAGO;
+       buf[0] = CMD_DMAGO;
+       buf[0] |= (ns << 1);
+       buf[1] = chan & 0x7;
+       *((u32 *)&buf[2]) = addr;
+       return SZ_DMAGO;
+ }
+ #define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
+ /* Returns Time-Out */
+ static bool _until_dmac_idle(struct pl330_thread *thrd)
+ {
+       void __iomem *regs = thrd->dmac->pinfo->base;
+       unsigned long loops = msecs_to_loops(5);
+       do {
+               /* Until Manager is Idle */
+               if (!(readl(regs + DBGSTATUS) & DBG_BUSY))
+                       break;
+               cpu_relax();
+       } while (--loops);
+       if (!loops)
+               return true;
+       return false;
+ }
+ static inline void _execute_DBGINSN(struct pl330_thread *thrd,
+               u8 insn[], bool as_manager)
+ {
+       void __iomem *regs = thrd->dmac->pinfo->base;
+       u32 val;
+       val = (insn[0] << 16) | (insn[1] << 24);
+       if (!as_manager) {
+               val |= (1 << 0);
+               val |= (thrd->id << 8); /* Channel Number */
+       }
+       writel(val, regs + DBGINST0);
+       val = *((u32 *)&insn[2]);
+       writel(val, regs + DBGINST1);
+       /* If timed out due to halted state-machine */
+       if (_until_dmac_idle(thrd)) {
+               dev_err(thrd->dmac->pinfo->dev, "DMAC halted!\n");
+               return;
+       }
+       /* Get going */
+       writel(0, regs + DBGCMD);
+ }
+ /*
+  * Mark a _pl330_req as free.
+  * We do it by writing DMAEND as the first instruction
+  * because no valid request is going to have DMAEND as
+  * its first instruction to execute.
+  */
+ static void mark_free(struct pl330_thread *thrd, int idx)
+ {
+       struct _pl330_req *req = &thrd->req[idx];
+       _emit_END(0, req->mc_cpu);
+       req->mc_len = 0;
+       thrd->req_running = -1;
+ }
+ static inline u32 _state(struct pl330_thread *thrd)
+ {
+       void __iomem *regs = thrd->dmac->pinfo->base;
+       u32 val;
+       if (is_manager(thrd))
+               val = readl(regs + DS) & 0xf;
+       else
+               val = readl(regs + CS(thrd->id)) & 0xf;
+       switch (val) {
+       case DS_ST_STOP:
+               return PL330_STATE_STOPPED;
+       case DS_ST_EXEC:
+               return PL330_STATE_EXECUTING;
+       case DS_ST_CMISS:
+               return PL330_STATE_CACHEMISS;
+       case DS_ST_UPDTPC:
+               return PL330_STATE_UPDTPC;
+       case DS_ST_WFE:
+               return PL330_STATE_WFE;
+       case DS_ST_FAULT:
+               return PL330_STATE_FAULTING;
+       case DS_ST_ATBRR:
+               if (is_manager(thrd))
+                       return PL330_STATE_INVALID;
+               else
+                       return PL330_STATE_ATBARRIER;
+       case DS_ST_QBUSY:
+               if (is_manager(thrd))
+                       return PL330_STATE_INVALID;
+               else
+                       return PL330_STATE_QUEUEBUSY;
+       case DS_ST_WFP:
+               if (is_manager(thrd))
+                       return PL330_STATE_INVALID;
+               else
+                       return PL330_STATE_WFP;
+       case DS_ST_KILL:
+               if (is_manager(thrd))
+                       return PL330_STATE_INVALID;
+               else
+                       return PL330_STATE_KILLING;
+       case DS_ST_CMPLT:
+               if (is_manager(thrd))
+                       return PL330_STATE_INVALID;
+               else
+                       return PL330_STATE_COMPLETING;
+       case DS_ST_FLTCMP:
+               if (is_manager(thrd))
+                       return PL330_STATE_INVALID;
+               else
+                       return PL330_STATE_FAULT_COMPLETING;
+       default:
+               return PL330_STATE_INVALID;
+       }
+ }
+ static void _stop(struct pl330_thread *thrd)
+ {
+       void __iomem *regs = thrd->dmac->pinfo->base;
+       u8 insn[6] = {0, 0, 0, 0, 0, 0};
+       if (_state(thrd) == PL330_STATE_FAULT_COMPLETING)
+               UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING);
+       /* Return if nothing needs to be done */
+       if (_state(thrd) == PL330_STATE_COMPLETING
+                 || _state(thrd) == PL330_STATE_KILLING
+                 || _state(thrd) == PL330_STATE_STOPPED)
+               return;
+       _emit_KILL(0, insn);
+       /* Stop generating interrupts for SEV */
+       writel(readl(regs + INTEN) & ~(1 << thrd->ev), regs + INTEN);
+       _execute_DBGINSN(thrd, insn, is_manager(thrd));
+ }
+ /* Start doing req 'idx' of thread 'thrd' */
+ static bool _trigger(struct pl330_thread *thrd)
+ {
+       void __iomem *regs = thrd->dmac->pinfo->base;
+       struct _pl330_req *req;
+       struct pl330_req *r;
+       struct _arg_GO go;
+       unsigned ns;
+       u8 insn[6] = {0, 0, 0, 0, 0, 0};
+       int idx;
+       /* Return if already ACTIVE */
+       if (_state(thrd) != PL330_STATE_STOPPED)
+               return true;
+       idx = 1 - thrd->lstenq;
+       if (!IS_FREE(&thrd->req[idx]))
+               req = &thrd->req[idx];
+       else {
+               idx = thrd->lstenq;
+               if (!IS_FREE(&thrd->req[idx]))
+                       req = &thrd->req[idx];
+               else
+                       req = NULL;
+       }
+       /* Return if no request */
+       if (!req || !req->r)
+               return true;
+       r = req->r;
+       if (r->cfg)
+               ns = r->cfg->nonsecure ? 1 : 0;
+       else if (readl(regs + CS(thrd->id)) & CS_CNS)
+               ns = 1;
+       else
+               ns = 0;
+       /* See 'Abort Sources' point-4 at Page 2-25 */
+       if (_manager_ns(thrd) && !ns)
+               dev_info(thrd->dmac->pinfo->dev, "%s:%d Recipe for ABORT!\n",
+                       __func__, __LINE__);
+       go.chan = thrd->id;
+       go.addr = req->mc_bus;
+       go.ns = ns;
+       _emit_GO(0, insn, &go);
+       /* Set to generate interrupts for SEV */
+       writel(readl(regs + INTEN) | (1 << thrd->ev), regs + INTEN);
+       /* Only manager can execute GO */
+       _execute_DBGINSN(thrd, insn, true);
+       thrd->req_running = idx;
+       return true;
+ }
+ static bool _start(struct pl330_thread *thrd)
+ {
+       switch (_state(thrd)) {
+       case PL330_STATE_FAULT_COMPLETING:
+               UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING);
+               if (_state(thrd) == PL330_STATE_KILLING)
+                       UNTIL(thrd, PL330_STATE_STOPPED)
+       case PL330_STATE_FAULTING:
+               _stop(thrd);
+       case PL330_STATE_KILLING:
+       case PL330_STATE_COMPLETING:
+               UNTIL(thrd, PL330_STATE_STOPPED)
+       case PL330_STATE_STOPPED:
+               return _trigger(thrd);
+       case PL330_STATE_WFP:
+       case PL330_STATE_QUEUEBUSY:
+       case PL330_STATE_ATBARRIER:
+       case PL330_STATE_UPDTPC:
+       case PL330_STATE_CACHEMISS:
+       case PL330_STATE_EXECUTING:
+               return true;
+       case PL330_STATE_WFE: /* For RESUME, nothing yet */
+       default:
+               return false;
+       }
+ }
+ static inline int _ldst_memtomem(unsigned dry_run, u8 buf[],
+               const struct _xfer_spec *pxs, int cyc)
+ {
+       int off = 0;
+       struct pl330_config *pcfg = pxs->r->cfg->pcfg;
+       /* check lock-up free version */
+       if (get_revision(pcfg->periph_id) >= PERIPH_REV_R1P0) {
+               while (cyc--) {
+                       off += _emit_LD(dry_run, &buf[off], ALWAYS);
+                       off += _emit_ST(dry_run, &buf[off], ALWAYS);
+               }
+       } else {
+               while (cyc--) {
+                       off += _emit_LD(dry_run, &buf[off], ALWAYS);
+                       off += _emit_RMB(dry_run, &buf[off]);
+                       off += _emit_ST(dry_run, &buf[off], ALWAYS);
+                       off += _emit_WMB(dry_run, &buf[off]);
+               }
+       }
+       return off;
+ }
+ static inline int _ldst_devtomem(unsigned dry_run, u8 buf[],
+               const struct _xfer_spec *pxs, int cyc)
+ {
+       int off = 0;
+       while (cyc--) {
+               off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->r->peri);
+               off += _emit_LDP(dry_run, &buf[off], SINGLE, pxs->r->peri);
+               off += _emit_ST(dry_run, &buf[off], ALWAYS);
+               off += _emit_FLUSHP(dry_run, &buf[off], pxs->r->peri);
+       }
+       return off;
+ }
+ static inline int _ldst_memtodev(unsigned dry_run, u8 buf[],
+               const struct _xfer_spec *pxs, int cyc)
+ {
+       int off = 0;
+       while (cyc--) {
+               off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->r->peri);
+               off += _emit_LD(dry_run, &buf[off], ALWAYS);
+               off += _emit_STP(dry_run, &buf[off], SINGLE, pxs->r->peri);
+               off += _emit_FLUSHP(dry_run, &buf[off], pxs->r->peri);
+       }
+       return off;
+ }
+ static int _bursts(unsigned dry_run, u8 buf[],
+               const struct _xfer_spec *pxs, int cyc)
+ {
+       int off = 0;
+       switch (pxs->r->rqtype) {
+       case MEMTODEV:
+               off += _ldst_memtodev(dry_run, &buf[off], pxs, cyc);
+               break;
+       case DEVTOMEM:
+               off += _ldst_devtomem(dry_run, &buf[off], pxs, cyc);
+               break;
+       case MEMTOMEM:
+               off += _ldst_memtomem(dry_run, &buf[off], pxs, cyc);
+               break;
+       default:
+               off += 0x40000000; /* Scare off the Client */
+               break;
+       }
+       return off;
+ }
+ /* Returns bytes consumed and updates bursts */
+ static inline int _loop(unsigned dry_run, u8 buf[],
+               unsigned long *bursts, const struct _xfer_spec *pxs)
+ {
+       int cyc, cycmax, szlp, szlpend, szbrst, off;
+       unsigned lcnt0, lcnt1, ljmp0, ljmp1;
+       struct _arg_LPEND lpend;
+       /* Max iterations possible in DMALP is 256 */
+       if (*bursts >= 256*256) {
+               lcnt1 = 256;
+               lcnt0 = 256;
+               cyc = *bursts / lcnt1 / lcnt0;
+       } else if (*bursts > 256) {
+               lcnt1 = 256;
+               lcnt0 = *bursts / lcnt1;
+               cyc = 1;
+       } else {
+               lcnt1 = *bursts;
+               lcnt0 = 0;
+               cyc = 1;
+       }
+       szlp = _emit_LP(1, buf, 0, 0);
+       szbrst = _bursts(1, buf, pxs, 1);
+       lpend.cond = ALWAYS;
+       lpend.forever = false;
+       lpend.loop = 0;
+       lpend.bjump = 0;
+       szlpend = _emit_LPEND(1, buf, &lpend);
+       if (lcnt0) {
+               szlp *= 2;
+               szlpend *= 2;
+       }
+       /*
+        * Max bursts that we can unroll due to limit on the
+        * size of backward jump that can be encoded in DMALPEND
+        * which is 8-bits and hence 255
+        */
+       cycmax = (255 - (szlp + szlpend)) / szbrst;
+       cyc = (cycmax < cyc) ? cycmax : cyc;
+       off = 0;
+       if (lcnt0) {
+               off += _emit_LP(dry_run, &buf[off], 0, lcnt0);
+               ljmp0 = off;
+       }
+       off += _emit_LP(dry_run, &buf[off], 1, lcnt1);
+       ljmp1 = off;
+       off += _bursts(dry_run, &buf[off], pxs, cyc);
+       lpend.cond = ALWAYS;
+       lpend.forever = false;
+       lpend.loop = 1;
+       lpend.bjump = off - ljmp1;
+       off += _emit_LPEND(dry_run, &buf[off], &lpend);
+       if (lcnt0) {
+               lpend.cond = ALWAYS;
+               lpend.forever = false;
+               lpend.loop = 0;
+               lpend.bjump = off - ljmp0;
+               off += _emit_LPEND(dry_run, &buf[off], &lpend);
+       }
+       *bursts = lcnt1 * cyc;
+       if (lcnt0)
+               *bursts *= lcnt0;
+       return off;
+ }
+ static inline int _setup_loops(unsigned dry_run, u8 buf[],
+               const struct _xfer_spec *pxs)
+ {
+       struct pl330_xfer *x = pxs->x;
+       u32 ccr = pxs->ccr;
+       unsigned long c, bursts = BYTE_TO_BURST(x->bytes, ccr);
+       int off = 0;
+       while (bursts) {
+               c = bursts;
+               off += _loop(dry_run, &buf[off], &c, pxs);
+               bursts -= c;
+       }
+       return off;
+ }
+ static inline int _setup_xfer(unsigned dry_run, u8 buf[],
+               const struct _xfer_spec *pxs)
+ {
+       struct pl330_xfer *x = pxs->x;
+       int off = 0;
+       /* DMAMOV SAR, x->src_addr */
+       off += _emit_MOV(dry_run, &buf[off], SAR, x->src_addr);
+       /* DMAMOV DAR, x->dst_addr */
+       off += _emit_MOV(dry_run, &buf[off], DAR, x->dst_addr);
+       /* Setup Loop(s) */
+       off += _setup_loops(dry_run, &buf[off], pxs);
+       return off;
+ }
+ /*
+  * A req is a sequence of one or more xfer units.
+  * Returns the number of bytes taken to setup the MC for the req.
+  */
+ static int _setup_req(unsigned dry_run, struct pl330_thread *thrd,
+               unsigned index, struct _xfer_spec *pxs)
+ {
+       struct _pl330_req *req = &thrd->req[index];
+       struct pl330_xfer *x;
+       u8 *buf = req->mc_cpu;
+       int off = 0;
+       PL330_DBGMC_START(req->mc_bus);
+       /* DMAMOV CCR, ccr */
+       off += _emit_MOV(dry_run, &buf[off], CCR, pxs->ccr);
+       x = pxs->r->x;
+       do {
+               /* Error if xfer length is not aligned at burst size */
+               if (x->bytes % (BRST_SIZE(pxs->ccr) * BRST_LEN(pxs->ccr)))
+                       return -EINVAL;
+               pxs->x = x;
+               off += _setup_xfer(dry_run, &buf[off], pxs);
+               x = x->next;
+       } while (x);
+       /* DMASEV peripheral/event */
+       off += _emit_SEV(dry_run, &buf[off], thrd->ev);
+       /* DMAEND */
+       off += _emit_END(dry_run, &buf[off]);
+       return off;
+ }
+ static inline u32 _prepare_ccr(const struct pl330_reqcfg *rqc)
+ {
+       u32 ccr = 0;
+       if (rqc->src_inc)
+               ccr |= CC_SRCINC;
+       if (rqc->dst_inc)
+               ccr |= CC_DSTINC;
+       /* We set same protection levels for Src and DST for now */
+       if (rqc->privileged)
+               ccr |= CC_SRCPRI | CC_DSTPRI;
+       if (rqc->nonsecure)
+               ccr |= CC_SRCNS | CC_DSTNS;
+       if (rqc->insnaccess)
+               ccr |= CC_SRCIA | CC_DSTIA;
+       ccr |= (((rqc->brst_len - 1) & 0xf) << CC_SRCBRSTLEN_SHFT);
+       ccr |= (((rqc->brst_len - 1) & 0xf) << CC_DSTBRSTLEN_SHFT);
+       ccr |= (rqc->brst_size << CC_SRCBRSTSIZE_SHFT);
+       ccr |= (rqc->brst_size << CC_DSTBRSTSIZE_SHFT);
+       ccr |= (rqc->scctl << CC_SRCCCTRL_SHFT);
+       ccr |= (rqc->dcctl << CC_DSTCCTRL_SHFT);
+       ccr |= (rqc->swap << CC_SWAP_SHFT);
+       return ccr;
+ }
+ static inline bool _is_valid(u32 ccr)
+ {
+       enum pl330_dstcachectrl dcctl;
+       enum pl330_srccachectrl scctl;
+       dcctl = (ccr >> CC_DSTCCTRL_SHFT) & CC_DRCCCTRL_MASK;
+       scctl = (ccr >> CC_SRCCCTRL_SHFT) & CC_SRCCCTRL_MASK;
+       if (dcctl == DINVALID1 || dcctl == DINVALID2
+                       || scctl == SINVALID1 || scctl == SINVALID2)
+               return false;
+       else
+               return true;
+ }
+ /*
+  * Submit a list of xfers after which the client wants notification.
+  * Client is not notified after each xfer unit, just once after all
+  * xfer units are done or some error occurs.
+  */
+ static int pl330_submit_req(void *ch_id, struct pl330_req *r)
+ {
+       struct pl330_thread *thrd = ch_id;
+       struct pl330_dmac *pl330;
+       struct pl330_info *pi;
+       struct _xfer_spec xs;
+       unsigned long flags;
+       void __iomem *regs;
+       unsigned idx;
+       u32 ccr;
+       int ret = 0;
+       /* No Req or Unacquired Channel or DMAC */
+       if (!r || !thrd || thrd->free)
+               return -EINVAL;
+       pl330 = thrd->dmac;
+       pi = pl330->pinfo;
+       regs = pi->base;
+       if (pl330->state == DYING
+               || pl330->dmac_tbd.reset_chan & (1 << thrd->id)) {
+               dev_info(thrd->dmac->pinfo->dev, "%s:%d\n",
+                       __func__, __LINE__);
+               return -EAGAIN;
+       }
+       /* If request for non-existing peripheral */
+       if (r->rqtype != MEMTOMEM && r->peri >= pi->pcfg.num_peri) {
+               dev_info(thrd->dmac->pinfo->dev,
+                               "%s:%d Invalid peripheral(%u)!\n",
+                               __func__, __LINE__, r->peri);
+               return -EINVAL;
+       }
+       spin_lock_irqsave(&pl330->lock, flags);
+       if (_queue_full(thrd)) {
+               ret = -EAGAIN;
+               goto xfer_exit;
+       }
+       /* Prefer Secure Channel */
+       if (!_manager_ns(thrd))
+               r->cfg->nonsecure = 0;
+       else
+               r->cfg->nonsecure = 1;
+       /* Use last settings, if not provided */
+       if (r->cfg)
+               ccr = _prepare_ccr(r->cfg);
+       else
+               ccr = readl(regs + CC(thrd->id));
+       /* If this req doesn't have valid xfer settings */
+       if (!_is_valid(ccr)) {
+               ret = -EINVAL;
+               dev_info(thrd->dmac->pinfo->dev, "%s:%d Invalid CCR(%x)!\n",
+                       __func__, __LINE__, ccr);
+               goto xfer_exit;
+       }
+       idx = IS_FREE(&thrd->req[0]) ? 0 : 1;
+       xs.ccr = ccr;
+       xs.r = r;
+       /* First dry run to check if req is acceptable */
+       ret = _setup_req(1, thrd, idx, &xs);
+       if (ret < 0)
+               goto xfer_exit;
+       if (ret > pi->mcbufsz / 2) {
+               dev_info(thrd->dmac->pinfo->dev,
+                       "%s:%d Trying increasing mcbufsz\n",
+                               __func__, __LINE__);
+               ret = -ENOMEM;
+               goto xfer_exit;
+       }
+       /* Hook the request */
+       thrd->lstenq = idx;
+       thrd->req[idx].mc_len = _setup_req(0, thrd, idx, &xs);
+       thrd->req[idx].r = r;
+       ret = 0;
+ xfer_exit:
+       spin_unlock_irqrestore(&pl330->lock, flags);
+       return ret;
+ }
+ static void pl330_dotask(unsigned long data)
+ {
+       struct pl330_dmac *pl330 = (struct pl330_dmac *) data;
+       struct pl330_info *pi = pl330->pinfo;
+       unsigned long flags;
+       int i;
+       spin_lock_irqsave(&pl330->lock, flags);
+       /* The DMAC itself gone nuts */
+       if (pl330->dmac_tbd.reset_dmac) {
+               pl330->state = DYING;
+               /* Reset the manager too */
+               pl330->dmac_tbd.reset_mngr = true;
+               /* Clear the reset flag */
+               pl330->dmac_tbd.reset_dmac = false;
+       }
+       if (pl330->dmac_tbd.reset_mngr) {
+               _stop(pl330->manager);
+               /* Reset all channels */
+               pl330->dmac_tbd.reset_chan = (1 << pi->pcfg.num_chan) - 1;
+               /* Clear the reset flag */
+               pl330->dmac_tbd.reset_mngr = false;
+       }
+       for (i = 0; i < pi->pcfg.num_chan; i++) {
+               if (pl330->dmac_tbd.reset_chan & (1 << i)) {
+                       struct pl330_thread *thrd = &pl330->channels[i];
+                       void __iomem *regs = pi->base;
+                       enum pl330_op_err err;
+                       _stop(thrd);
+                       if (readl(regs + FSC) & (1 << thrd->id))
+                               err = PL330_ERR_FAIL;
+                       else
+                               err = PL330_ERR_ABORT;
+                       spin_unlock_irqrestore(&pl330->lock, flags);
+                       _callback(thrd->req[1 - thrd->lstenq].r, err);
+                       _callback(thrd->req[thrd->lstenq].r, err);
+                       spin_lock_irqsave(&pl330->lock, flags);
+                       thrd->req[0].r = NULL;
+                       thrd->req[1].r = NULL;
+                       mark_free(thrd, 0);
+                       mark_free(thrd, 1);
+                       /* Clear the reset flag */
+                       pl330->dmac_tbd.reset_chan &= ~(1 << i);
+               }
+       }
+       spin_unlock_irqrestore(&pl330->lock, flags);
+       return;
+ }
+ /* Returns 1 if state was updated, 0 otherwise */
+ static int pl330_update(const struct pl330_info *pi)
+ {
+       struct _pl330_req *rqdone;
+       struct pl330_dmac *pl330;
+       unsigned long flags;
+       void __iomem *regs;
+       u32 val;
+       int id, ev, ret = 0;
+       if (!pi || !pi->pl330_data)
+               return 0;
+       regs = pi->base;
+       pl330 = pi->pl330_data;
+       spin_lock_irqsave(&pl330->lock, flags);
+       val = readl(regs + FSM) & 0x1;
+       if (val)
+               pl330->dmac_tbd.reset_mngr = true;
+       else
+               pl330->dmac_tbd.reset_mngr = false;
+       val = readl(regs + FSC) & ((1 << pi->pcfg.num_chan) - 1);
+       pl330->dmac_tbd.reset_chan |= val;
+       if (val) {
+               int i = 0;
+               while (i < pi->pcfg.num_chan) {
+                       if (val & (1 << i)) {
+                               dev_info(pi->dev,
+                                       "Reset Channel-%d\t CS-%x FTC-%x\n",
+                                               i, readl(regs + CS(i)),
+                                               readl(regs + FTC(i)));
+                               _stop(&pl330->channels[i]);
+                       }
+                       i++;
+               }
+       }
+       /* Check which event happened i.e, thread notified */
+       val = readl(regs + ES);
+       if (pi->pcfg.num_events < 32
+                       && val & ~((1 << pi->pcfg.num_events) - 1)) {
+               pl330->dmac_tbd.reset_dmac = true;
+               dev_err(pi->dev, "%s:%d Unexpected!\n", __func__, __LINE__);
+               ret = 1;
+               goto updt_exit;
+       }
+       for (ev = 0; ev < pi->pcfg.num_events; ev++) {
+               if (val & (1 << ev)) { /* Event occurred */
+                       struct pl330_thread *thrd;
+                       u32 inten = readl(regs + INTEN);
+                       int active;
+                       /* Clear the event */
+                       if (inten & (1 << ev))
+                               writel(1 << ev, regs + INTCLR);
+                       ret = 1;
+                       id = pl330->events[ev];
+                       thrd = &pl330->channels[id];
+                       active = thrd->req_running;
+                       if (active == -1) /* Aborted */
+                               continue;
+                       rqdone = &thrd->req[active];
+                       mark_free(thrd, active);
+                       /* Get going again ASAP */
+                       _start(thrd);
+                       /* For now, just make a list of callbacks to be done */
+                       list_add_tail(&rqdone->rqd, &pl330->req_done);
+               }
+       }
+       /* Now that we are in no hurry, do the callbacks */
+       while (!list_empty(&pl330->req_done)) {
+               struct pl330_req *r;
+               rqdone = container_of(pl330->req_done.next,
+                                       struct _pl330_req, rqd);
+               list_del_init(&rqdone->rqd);
+               /* Detach the req */
+               r = rqdone->r;
+               rqdone->r = NULL;
+               spin_unlock_irqrestore(&pl330->lock, flags);
+               _callback(r, PL330_ERR_NONE);
+               spin_lock_irqsave(&pl330->lock, flags);
+       }
+ updt_exit:
+       spin_unlock_irqrestore(&pl330->lock, flags);
+       if (pl330->dmac_tbd.reset_dmac
+                       || pl330->dmac_tbd.reset_mngr
+                       || pl330->dmac_tbd.reset_chan) {
+               ret = 1;
+               tasklet_schedule(&pl330->tasks);
+       }
+       return ret;
+ }
+ static int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op)
+ {
+       struct pl330_thread *thrd = ch_id;
+       struct pl330_dmac *pl330;
+       unsigned long flags;
 -      int ret = 0, active = thrd->req_running;
++      int ret = 0, active;
+       if (!thrd || thrd->free || thrd->dmac->state == DYING)
+               return -EINVAL;
+       pl330 = thrd->dmac;
++      active = thrd->req_running;
+       spin_lock_irqsave(&pl330->lock, flags);
+       switch (op) {
+       case PL330_OP_FLUSH:
+               /* Make sure the channel is stopped */
+               _stop(thrd);
+               thrd->req[0].r = NULL;
+               thrd->req[1].r = NULL;
+               mark_free(thrd, 0);
+               mark_free(thrd, 1);
+               break;
+       case PL330_OP_ABORT:
+               /* Make sure the channel is stopped */
+               _stop(thrd);
+               /* ABORT is only for the active req */
+               if (active == -1)
+                       break;
+               thrd->req[active].r = NULL;
+               mark_free(thrd, active);
+               /* Start the next */
+       case PL330_OP_START:
+               if ((active == -1) && !_start(thrd))
+                       ret = -EIO;
+               break;
+       default:
+               ret = -EINVAL;
+       }
+       spin_unlock_irqrestore(&pl330->lock, flags);
+       return ret;
+ }
+ /* Reserve an event */
+ static inline int _alloc_event(struct pl330_thread *thrd)
+ {
+       struct pl330_dmac *pl330 = thrd->dmac;
+       struct pl330_info *pi = pl330->pinfo;
+       int ev;
+       for (ev = 0; ev < pi->pcfg.num_events; ev++)
+               if (pl330->events[ev] == -1) {
+                       pl330->events[ev] = thrd->id;
+                       return ev;
+               }
+       return -1;
+ }
+ static bool _chan_ns(const struct pl330_info *pi, int i)
+ {
+       return pi->pcfg.irq_ns & (1 << i);
+ }
+ /* Upon success, returns IdentityToken for the
+  * allocated channel, NULL otherwise.
+  */
+ static void *pl330_request_channel(const struct pl330_info *pi)
+ {
+       struct pl330_thread *thrd = NULL;
+       struct pl330_dmac *pl330;
+       unsigned long flags;
+       int chans, i;
+       if (!pi || !pi->pl330_data)
+               return NULL;
  
- #define NR_DEFAULT_DESC       16
+       pl330 = pi->pl330_data;
+       if (pl330->state == DYING)
+               return NULL;
+       chans = pi->pcfg.num_chan;
+       spin_lock_irqsave(&pl330->lock, flags);
+       for (i = 0; i < chans; i++) {
+               thrd = &pl330->channels[i];
+               if ((thrd->free) && (!_manager_ns(thrd) ||
+                                       _chan_ns(pi, i))) {
+                       thrd->ev = _alloc_event(thrd);
+                       if (thrd->ev >= 0) {
+                               thrd->free = false;
+                               thrd->lstenq = 1;
+                               thrd->req[0].r = NULL;
+                               mark_free(thrd, 0);
+                               thrd->req[1].r = NULL;
+                               mark_free(thrd, 1);
+                               break;
+                       }
+               }
+               thrd = NULL;
+       }
+       spin_unlock_irqrestore(&pl330->lock, flags);
+       return thrd;
+ }
+ /* Release an event */
+ static inline void _free_event(struct pl330_thread *thrd, int ev)
+ {
+       struct pl330_dmac *pl330 = thrd->dmac;
+       struct pl330_info *pi = pl330->pinfo;
+       /* If the event is valid and was held by the thread */
+       if (ev >= 0 && ev < pi->pcfg.num_events
+                       && pl330->events[ev] == thrd->id)
+               pl330->events[ev] = -1;
+ }
+ static void pl330_release_channel(void *ch_id)
+ {
+       struct pl330_thread *thrd = ch_id;
+       struct pl330_dmac *pl330;
+       unsigned long flags;
+       if (!thrd || thrd->free)
+               return;
+       _stop(thrd);
+       _callback(thrd->req[1 - thrd->lstenq].r, PL330_ERR_ABORT);
+       _callback(thrd->req[thrd->lstenq].r, PL330_ERR_ABORT);
+       pl330 = thrd->dmac;
+       spin_lock_irqsave(&pl330->lock, flags);
+       _free_event(thrd, thrd->ev);
+       thrd->free = true;
+       spin_unlock_irqrestore(&pl330->lock, flags);
+ }
+ /* Initialize the structure for PL330 configuration, that can be used
+  * by the client driver the make best use of the DMAC
+  */
+ static void read_dmac_config(struct pl330_info *pi)
+ {
+       void __iomem *regs = pi->base;
+       u32 val;
+       val = readl(regs + CRD) >> CRD_DATA_WIDTH_SHIFT;
+       val &= CRD_DATA_WIDTH_MASK;
+       pi->pcfg.data_bus_width = 8 * (1 << val);
+       val = readl(regs + CRD) >> CRD_DATA_BUFF_SHIFT;
+       val &= CRD_DATA_BUFF_MASK;
+       pi->pcfg.data_buf_dep = val + 1;
+       val = readl(regs + CR0) >> CR0_NUM_CHANS_SHIFT;
+       val &= CR0_NUM_CHANS_MASK;
+       val += 1;
+       pi->pcfg.num_chan = val;
+       val = readl(regs + CR0);
+       if (val & CR0_PERIPH_REQ_SET) {
+               val = (val >> CR0_NUM_PERIPH_SHIFT) & CR0_NUM_PERIPH_MASK;
+               val += 1;
+               pi->pcfg.num_peri = val;
+               pi->pcfg.peri_ns = readl(regs + CR4);
+       } else {
+               pi->pcfg.num_peri = 0;
+       }
+       val = readl(regs + CR0);
+       if (val & CR0_BOOT_MAN_NS)
+               pi->pcfg.mode |= DMAC_MODE_NS;
+       else
+               pi->pcfg.mode &= ~DMAC_MODE_NS;
+       val = readl(regs + CR0) >> CR0_NUM_EVENTS_SHIFT;
+       val &= CR0_NUM_EVENTS_MASK;
+       val += 1;
+       pi->pcfg.num_events = val;
+       pi->pcfg.irq_ns = readl(regs + CR3);
+       pi->pcfg.periph_id = get_id(pi, PERIPH_ID);
+       pi->pcfg.pcell_id = get_id(pi, PCELL_ID);
+ }
+ static inline void _reset_thread(struct pl330_thread *thrd)
+ {
+       struct pl330_dmac *pl330 = thrd->dmac;
+       struct pl330_info *pi = pl330->pinfo;
+       thrd->req[0].mc_cpu = pl330->mcode_cpu
+                               + (thrd->id * pi->mcbufsz);
+       thrd->req[0].mc_bus = pl330->mcode_bus
+                               + (thrd->id * pi->mcbufsz);
+       thrd->req[0].r = NULL;
+       mark_free(thrd, 0);
+       thrd->req[1].mc_cpu = thrd->req[0].mc_cpu
+                               + pi->mcbufsz / 2;
+       thrd->req[1].mc_bus = thrd->req[0].mc_bus
+                               + pi->mcbufsz / 2;
+       thrd->req[1].r = NULL;
+       mark_free(thrd, 1);
+ }
+ static int dmac_alloc_threads(struct pl330_dmac *pl330)
+ {
+       struct pl330_info *pi = pl330->pinfo;
+       int chans = pi->pcfg.num_chan;
+       struct pl330_thread *thrd;
+       int i;
+       /* Allocate 1 Manager and 'chans' Channel threads */
+       pl330->channels = kzalloc((1 + chans) * sizeof(*thrd),
+                                       GFP_KERNEL);
+       if (!pl330->channels)
+               return -ENOMEM;
+       /* Init Channel threads */
+       for (i = 0; i < chans; i++) {
+               thrd = &pl330->channels[i];
+               thrd->id = i;
+               thrd->dmac = pl330;
+               _reset_thread(thrd);
+               thrd->free = true;
+       }
+       /* MANAGER is indexed at the end */
+       thrd = &pl330->channels[chans];
+       thrd->id = chans;
+       thrd->dmac = pl330;
+       thrd->free = false;
+       pl330->manager = thrd;
+       return 0;
+ }
+ static int dmac_alloc_resources(struct pl330_dmac *pl330)
+ {
+       struct pl330_info *pi = pl330->pinfo;
+       int chans = pi->pcfg.num_chan;
+       int ret;
  
- enum desc_status {
-       /* In the DMAC pool */
-       FREE,
-       /*
-        * Allocted to some channel during prep_xxx
-        * Also may be sitting on the work_list.
-        */
-       PREP,
        /*
-        * Sitting on the work_list and already submitted
-        * to the PL330 core. Not more than two descriptors
-        * of a channel can be BUSY at any time.
+        * Alloc MicroCode buffer for 'chans' Channel threads.
+        * A channel's buffer offset is (Channel_Id * MCODE_BUFF_PERCHAN)
         */
-       BUSY,
+       pl330->mcode_cpu = dma_alloc_coherent(pi->dev,
+                               chans * pi->mcbufsz,
+                               &pl330->mcode_bus, GFP_KERNEL);
+       if (!pl330->mcode_cpu) {
+               dev_err(pi->dev, "%s:%d Can't allocate memory!\n",
+                       __func__, __LINE__);
+               return -ENOMEM;
+       }
+       ret = dmac_alloc_threads(pl330);
+       if (ret) {
+               dev_err(pi->dev, "%s:%d Can't to create channels for DMAC!\n",
+                       __func__, __LINE__);
+               dma_free_coherent(pi->dev,
+                               chans * pi->mcbufsz,
+                               pl330->mcode_cpu, pl330->mcode_bus);
+               return ret;
+       }
+       return 0;
+ }
+ static int pl330_add(struct pl330_info *pi)
+ {
+       struct pl330_dmac *pl330;
+       void __iomem *regs;
+       int i, ret;
+       if (!pi || !pi->dev)
+               return -EINVAL;
+       /* If already added */
+       if (pi->pl330_data)
+               return -EINVAL;
        /*
-        * Sitting on the channel work_list but xfer done
-        * by PL330 core
+        * If the SoC can perform reset on the DMAC, then do it
+        * before reading its configuration.
         */
-       DONE,
};
+       if (pi->dmac_reset)
              pi->dmac_reset(pi);
  
- struct dma_pl330_chan {
-       /* Schedule desc completion */
-       struct tasklet_struct task;
+       regs = pi->base;
  
-       /* DMA-Engine Channel */
-       struct dma_chan chan;
+       /* Check if we can handle this DMAC */
+       if ((get_id(pi, PERIPH_ID) & 0xfffff) != PERIPH_ID_VAL
+          || get_id(pi, PCELL_ID) != PCELL_ID_VAL) {
+               dev_err(pi->dev, "PERIPH_ID 0x%x, PCELL_ID 0x%x !\n",
+                       get_id(pi, PERIPH_ID), get_id(pi, PCELL_ID));
+               return -EINVAL;
+       }
  
-       /* Last completed cookie */
-       dma_cookie_t completed;
+       /* Read the configuration of the DMAC */
+       read_dmac_config(pi);
  
-       /* List of to be xfered descriptors */
-       struct list_head work_list;
+       if (pi->pcfg.num_events == 0) {
+               dev_err(pi->dev, "%s:%d Can't work without events!\n",
+                       __func__, __LINE__);
+               return -EINVAL;
+       }
  
-       /* Pointer to the DMAC that manages this channel,
-        * NULL if the channel is available to be acquired.
-        * As the parent, this DMAC also provides descriptors
-        * to the channel.
-        */
-       struct dma_pl330_dmac *dmac;
+       pl330 = kzalloc(sizeof(*pl330), GFP_KERNEL);
+       if (!pl330) {
+               dev_err(pi->dev, "%s:%d Can't allocate memory!\n",
+                       __func__, __LINE__);
+               return -ENOMEM;
+       }
  
-       /* To protect channel manipulation */
-       spinlock_t lock;
+       /* Assign the info structure and private data */
+       pl330->pinfo = pi;
+       pi->pl330_data = pl330;
  
-       /* Token of a hardware channel thread of PL330 DMAC
-        * NULL if the channel is available to be acquired.
-        */
-       void *pl330_chid;
+       spin_lock_init(&pl330->lock);
  
-       /* For D-to-M and M-to-D channels */
-       int burst_sz; /* the peripheral fifo width */
-       int burst_len; /* the number of burst */
-       dma_addr_t fifo_addr;
+       INIT_LIST_HEAD(&pl330->req_done);
  
-       /* for cyclic capability */
-       bool cyclic;
};
+       /* Use default MC buffer size if not provided */
+       if (!pi->mcbufsz)
              pi->mcbufsz = MCODE_BUFF_PER_REQ * 2;
  
- struct dma_pl330_dmac {
-       struct pl330_info pif;
+       /* Mark all events as free */
+       for (i = 0; i < pi->pcfg.num_events; i++)
+               pl330->events[i] = -1;
  
-       /* DMA-Engine Device */
-       struct dma_device ddma;
+       /* Allocate resources needed by the DMAC */
+       ret = dmac_alloc_resources(pl330);
+       if (ret) {
+               dev_err(pi->dev, "Unable to create channels for DMAC\n");
+               kfree(pl330);
+               return ret;
+       }
  
-       /* Pool of descriptors available for the DMAC's channels */
-       struct list_head desc_pool;
-       /* To protect desc_pool manipulation */
-       spinlock_t pool_lock;
+       tasklet_init(&pl330->tasks, pl330_dotask, (unsigned long) pl330);
  
-       /* Peripheral channels connected to this DMAC */
-       struct dma_pl330_chan *peripherals; /* keep at end */
+       pl330->state = INIT;
  
-       struct clk *clk;
- };
+       return 0;
+ }
  
- struct dma_pl330_desc {
-       /* To attach to a queue as child */
-       struct list_head node;
+ static int dmac_free_threads(struct pl330_dmac *pl330)
+ {
+       struct pl330_info *pi = pl330->pinfo;
+       int chans = pi->pcfg.num_chan;
+       struct pl330_thread *thrd;
+       int i;
  
-       /* Descriptor for the DMA Engine API */
-       struct dma_async_tx_descriptor txd;
+       /* Release Channel threads */
+       for (i = 0; i < chans; i++) {
+               thrd = &pl330->channels[i];
+               pl330_release_channel((void *)thrd);
+       }
  
-       /* Xfer for PL330 core */
-       struct pl330_xfer px;
+       /* Free memory */
+       kfree(pl330->channels);
  
-       struct pl330_reqcfg rqcfg;
-       struct pl330_req req;
+       return 0;
+ }
  
-       enum desc_status status;
+ static void dmac_free_resources(struct pl330_dmac *pl330)
+ {
+       struct pl330_info *pi = pl330->pinfo;
+       int chans = pi->pcfg.num_chan;
  
-       /* The channel which currently holds this desc */
-       struct dma_pl330_chan *pchan;
- };
+       dmac_free_threads(pl330);
+       dma_free_coherent(pi->dev, chans * pi->mcbufsz,
+                               pl330->mcode_cpu, pl330->mcode_bus);
+ }
+ static void pl330_del(struct pl330_info *pi)
+ {
+       struct pl330_dmac *pl330;
+       if (!pi || !pi->pl330_data)
+               return;
+       pl330 = pi->pl330_data;
+       pl330->state = UNINIT;
+       tasklet_kill(&pl330->tasks);
+       /* Free DMAC resources */
+       dmac_free_resources(pl330);
+       kfree(pl330);
+       pi->pl330_data = NULL;
+ }
  
  /* forward declaration */
  static struct amba_driver pl330_driver;
index 390863e7efbde4bb4ba37e210a1e694438b12cdd,492854b09d89152aeb9c759e0a54b9f3be534590..9819dc09ce08d24f7bd2924fd35d786cc013b0ac
@@@ -1971,13 -1967,19 +1970,21 @@@ static bool atmci_configure_dma(struct 
                        dma_request_channel(mask, atmci_filter, pdata->dma_slave);
        }
        if (!host->dma.chan) {
 -              dev_notice(&host->pdev->dev, "DMA not available, using PIO\n");
 +              dev_warn(&host->pdev->dev, "no DMA channel available\n");
 +              return false;
        } else {
                dev_info(&host->pdev->dev,
 -                                      "Using %s for DMA transfers\n",
 +                                      "using %s for DMA transfers\n",
                                        dma_chan_name(host->dma.chan));
+               host->dma_conf.src_addr = host->mapbase + ATMCI_RDR;
+               host->dma_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+               host->dma_conf.src_maxburst = 1;
+               host->dma_conf.dst_addr = host->mapbase + ATMCI_TDR;
+               host->dma_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+               host->dma_conf.dst_maxburst = 1;
+               host->dma_conf.device_fc = false;
 +              return true;
        }
  }
  
Simple merge
Simple merge
Simple merge
Simple merge
Simple merge
Simple merge
Simple merge
Simple merge
Simple merge
Simple merge
Simple merge
index a5966f691ef836954ae1bbee69697c81e98590bd,b3b5b38776f08a9cd315502a45727383a01eac0b..676f967390aeb8ccfe4983a9fab04285d62ce58d
  
  #include <linux/device.h>
  #include <linux/uio.h>
 +#include <linux/bug.h>
  #include <linux/scatterlist.h>
  #include <linux/bitmap.h>
+ #include <linux/types.h>
  #include <asm/page.h>
  
  /**
index e43c8fa2788b34062b5601066b112c6c667e5c67,af46b4e2b43845f38442c87c2d0529cb927b9b3e..6b818de2fc03344e6c532067b252655b32c99819
@@@ -54,15 -84,42 +55,17 @@@ static int snd_imx_pcm_hw_params(struc
  
        dma_params = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
  
 -      iprtd->dma_data.peripheral_type = IMX_DMATYPE_SSI;
 -      iprtd->dma_data.priority = DMA_PRIO_HIGH;
 -      iprtd->dma_data.dma_request = dma_params->dma;
 -
 -      /* Try to grab a DMA channel */
 -      if (!iprtd->dma_chan) {
 -              dma_cap_zero(mask);
 -              dma_cap_set(DMA_SLAVE, mask);
 -              iprtd->dma_chan = dma_request_channel(mask, filter, iprtd);
 -              if (!iprtd->dma_chan)
 -                      return -EINVAL;
 -      }
 -
 -      switch (params_format(params)) {
 -      case SNDRV_PCM_FORMAT_S16_LE:
 -              buswidth = DMA_SLAVE_BUSWIDTH_2_BYTES;
 -              break;
 -      case SNDRV_PCM_FORMAT_S20_3LE:
 -      case SNDRV_PCM_FORMAT_S24_LE:
 -              buswidth = DMA_SLAVE_BUSWIDTH_4_BYTES;
 -              break;
 -      default:
 -              return 0;
 -      }
 +      ret = snd_hwparams_to_dma_slave_config(substream, params, &slave_config);
 +      if (ret)
 +              return ret;
  
+       slave_config.device_fc = false;
        if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
 -              slave_config.direction = DMA_MEM_TO_DEV;
                slave_config.dst_addr = dma_params->dma_addr;
 -              slave_config.dst_addr_width = buswidth;
                slave_config.dst_maxburst = dma_params->burstsize;
        } else {
 -              slave_config.direction = DMA_DEV_TO_MEM;
                slave_config.src_addr = dma_params->dma_addr;
 -              slave_config.src_addr_width = buswidth;
                slave_config.src_maxburst = dma_params->burstsize;
        }