#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/gpio.h>
#include <linux/adc.h>
-#include <mach/iomux.h>
-#include <mach/board.h>
#include <linux/delay.h>
#include <linux/ktime.h>
#include <linux/slab.h>
#include <linux/fs.h>
#include <linux/string.h>
#include <linux/init.h>
-#include <linux/earlysuspend.h>
#include <linux/suspend.h>
+#include <linux/gpio.h>
+#include <linux/of_gpio.h>
+#include <linux/power/rockchip-adc-battery.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/machine.h>
+#include <linux/iio/driver.h>
+#include <linux/iio/consumer.h>
+
#ifdef CONFIG_EARLYSUSPEND
/* kernel/power/earlysuspend.c */
extern suspend_state_t get_suspend_state(void);
#endif
-static int rk30_battery_dbg_level = 0;
+static int rk30_battery_dbg_level;
module_param_named(dbg_level, rk30_battery_dbg_level, int, 0644);
#define DBG( args...) \
- do { \
- if (rk30_battery_dbg_level) { \
- pr_info(args); \
- } \
- } while (0)
+do {\
+ if (rk30_battery_dbg_level) {\
+ pr_info(args);\
+ } \
+} while (0)
#define TIMER_MS_COUNTS 1000
#define SLOPE_SECOND_COUNTS 15
#elif defined(CONFIG_ARCH_RK2928)
#define BAT_DEFINE_VALUE 3300
#else
-#define BAT_DEFINE_VALUE 2500
+#define BAT_DEFINE_VALUE 3300 /*2500*/
#endif
+#define RK30_GPIO_LOW 0
+#define RK30_GPIO_HIGH 1
+
+
#define BATT_FILENAME "/data/bat_last_capacity.dat"
char gDischargeFlag[4] = {"on "};
-#ifdef CONFIG_BATTERY_RK30_VOL3V8
-#define BATT_MAX_VOL_VALUE 4120 //Full charge volate
-#define BATT_ZERO_VOL_VALUE 3600//3500 //power down voltage
+#if 1
+#define BATT_MAX_VOL_VALUE 4250/*Full charge volatge*/
+#define BATT_ZERO_VOL_VALUE 3500/*power down voltage*/
#define BATT_NOMAL_VOL_VALUE 3800
static int batt_table[2*BATT_NUM+6] =
//struct timer_list timer;
struct workqueue_struct *wq;
struct delayed_work delay_work;
- struct delayed_work check_work;
+ struct delayed_work check_work;
struct work_struct dcwakeup_work;
struct work_struct lowerpower_work;
bool resume;
extern int dwc_otg_check_dpdm(void);
static int is_charge_ok(struct rk30_adc_battery_data *bat);
static void rk30_adc_battery_voltage_samples(struct rk30_adc_battery_data *bat);
+extern void rk_send_wakeup_key(void);
+static bool batt_gpio_is_valid(int number)
+{
+ return number > 0 && number < 256;
+}
#ifdef BATTERY_APK
printk("i=%d batt_table=%d\n",i+17,batt_table[i+17]);
return 0;
}
-DEVICE_ATTR(batparam, 0664, bat_param_read,NULL);
+DEVICE_ATTR(batparam, 0444, bat_param_read, NULL);
static ssize_t rkbatt_show_debug_attrs(struct device *dev,
__ATTR(flag, 0555, rkbatt_show_flag_attrs, rkbatt_restore_flag_attrs),
};
+static int rk_adc_battery_iio_read(struct rk30_adc_battery_platform_data *data)
+{
+ struct iio_channel *channel = data->chan;
+ int val, ret;
+
+ ret = iio_read_channel_raw(channel, &val);
+ if (ret < 0) {
+ pr_err("read channel() error: %d\n", ret);
+ return ret;
+ }
+ return val;
+}
+
+
static int create_sysfs_interfaces(struct device *dev)
{
int liTmep;
#endif
-
static int rk30_adc_battery_load_capacity(void)
{
char value[4];
static void rk_start_charge(struct rk30_adc_battery_data *bat)
{
struct rk30_adc_battery_platform_data *pdata = bat->pdata;
-
- if (pdata->charge_set_pin != INVALID_GPIO){
+ if (batt_gpio_is_valid(pdata->charge_set_pin))
gpio_direction_output(pdata->charge_set_pin, pdata->charge_set_level);
- }
}
static void rk_stop_charge(struct rk30_adc_battery_data *bat)
{
struct rk30_adc_battery_platform_data *pdata = bat->pdata;
- if (pdata->charge_set_pin != INVALID_GPIO){
+
+ if (batt_gpio_is_valid(pdata->charge_set_pin))
gpio_direction_output(pdata->charge_set_pin, 1 - pdata->charge_set_level);
- }
}
static int get_ac_status(struct rk30_adc_battery_data *bat){
struct rk30_adc_battery_platform_data *pdata = bat->pdata;
int status = 0;
- if (pdata->dc_det_pin != INVALID_GPIO){
+ if (batt_gpio_is_valid(pdata->dc_det_pin)) {
if (gpio_get_value (pdata->dc_det_pin) == pdata->dc_det_level){
status = 1;
}else{
return status;
}
-// state of charge --- charge-display
-static int get_usb_status1(struct rk30_adc_battery_data *bat){
- struct rk30_adc_battery_platform_data *pdata = bat->pdata;
- int status = 0;
- if(pdata->is_usb_charging){
- status = pdata->is_usb_charging();
- }
- return status;
-
-
+#if defined CONFIG_BATTERY_RK30_USB_CHARGE
-}
//state of charge ----running
static int get_usb_status2(struct rk30_adc_battery_data *bat){
return usb_status;
}
-
+#endif
static int rk_battery_get_status(struct rk30_adc_battery_data *bat)
{
int charge_on = 0;
- struct rk30_adc_battery_platform_data *pdata = bat->pdata;
+/* struct rk30_adc_battery_platform_data *pdata = bat->pdata;*/
int ac_ac_charging = 0, usb_ac_charging = 0;
int i=0;
-#if defined (CONFIG_BATTERY_RK30_AC_CHARGE)
ac_ac_charging = get_ac_status(bat);
if(1 == ac_ac_charging)
charge_on = 1;
-#endif
#if defined (CONFIG_BATTERY_RK30_USB_CHARGE)
if (strstr(saved_command_line,"charger")){
wake_lock(&charge_display_lock); //lock
- if( bat->pdata->usb_det_pin != INVALID_GPIO ){
+ if (batt_gpio_is_valid(bat->pdata->usb_det_pin)) {
if( gpio_get_value(bat->pdata->usb_det_pin)== bat->pdata->usb_det_level){
if(( 1 == usb_ac_charging )||( 1 == ac_ac_charging ))
bat -> ac_charging = 1;
if( 1 != bat->charge_level)
return -1;
- if((pdata->charge_ok_pin == INVALID_GPIO)&& ( pdata->charging_ok == NULL))
+ if ((!(batt_gpio_is_valid(pdata->charge_ok_pin))) && (
+ pdata->charging_ok == NULL))
return -1;
- if (pdata->charge_ok_pin != INVALID_GPIO){
+ if (batt_gpio_is_valid(pdata->charge_ok_pin)) {
if (gpio_get_value(pdata->charge_ok_pin) == pdata->charge_ok_level){
charge_is_ok =1;
}
return charge_is_ok;
-
}
ref_voltage = adc_get_curr_ref_volt();
voltage = (value * ref_voltage * (batt_table[4] +batt_table[5])) / (1024 *batt_table[5]);
#else
- voltage =voltage = adc_to_voltage(value);
+ voltage = adc_to_voltage(value);
#endif
}
value = bat->adc_val;
- adc_async_read(bat->client);
+ bat->adc_val = rk_adc_battery_iio_read(bat->pdata);
*(bat->pSamples++) = rk_adc_voltage(bat,value);
int capacity = 0;
int *p;
+
if (bat->pdata->use_board_table)
- p = bat->pdata->board_batt_table;
+ p = bat->pdata->board_batt_table;
+ else if (bat->pdata->dts_batt_table)
+ p = bat->pdata->dts_batt_table;
else
p = batt_table;
+
if (1 == bat->charge_level){ //charge
if(0 == bat->start_voltage_status ){
if(BatVoltage >= (p[2*BATT_NUM +5])){
return capacity;
}
+#if defined CONFIG_BATTERY_RK30_USB_CHARGE
static void rk_usb_charger(struct rk30_adc_battery_data *bat)
{
-
int capacity = 0;
-// struct rk30_adc_battery_platform_data *pdata = bat->pdata;
int timer_of_charge_sample = NUM_CHARGE_MIN_SAMPLE;
int timer_of_discharge_sample = NUM_CHARGE_MIN_SAMPLE;
bat->capacitytmp = capacity;
}
+#endif
static void rk_ac_charger(struct rk30_adc_battery_data *bat)
{
int capacity = 0;
if(bat->bat_capacity == 0)
bat->bat_capacity =1;
}
- printk("old_capacity = %d , new_capacity =%d, capacity = %d\n ",old_capacity,new_capacity ,bat ->bat_capacity);
+ DBG("oldcapacity %d,newcapacity %d,capacity %d\n", old_capacity
+ , new_capacity, bat->bat_capacity);
bat ->bat_change = 1;
}
+#if defined CONFIG_BATTERY_RK30_USB_CHARGE
#define to_battery_usb_device_info(x) container_of((x), \
struct rk30_adc_battery_data, usb);
.properties = rk30_adc_battery_usb_props,
.num_properties = ARRAY_SIZE(rk30_adc_battery_usb_props),
};
-
+#endif
static irqreturn_t rk30_adc_battery_dc_wakeup(int irq, void *dev_id)
{
disable_irq_nosync(irq);
struct rk30_adc_battery_data *bat = container_of((work), \
struct rk30_adc_battery_data, dcwakeup_work);
- rk28_send_wakeup_key(); // wake up the system
-
-
pdata = bat->pdata;
irq = gpio_to_irq(pdata->dc_det_pin);
free_irq(irq, NULL);
}
power_supply_changed(&bat ->ac);
+ rk_send_wakeup_key();
bat ->bat_status_cnt = 0; //the state of battery is change
bat ->old_charge_level = -1;
bat ->pSamples = bat->adc_samples;
- adc_sync_read(bat->client); //start adc sample
+ bat->adc_val = rk_adc_battery_iio_read(bat->pdata);
+
level = oldlevel = rk_battery_get_status(bat);//rk30_adc_battery_status_samples(bat);//init charge status
for (i = 0; i < NUM_VOLTAGE_SAMPLE; i++) { //0.3 s
bat->bat_capacity = (new_capacity < old_capacity) ? new_capacity : old_capacity; // aviod the value of capacity increase dicharge
}
- if( bat ->pdata->batt_low_pin != INVALID_GPIO){
+ if (batt_gpio_is_valid(bat->pdata->batt_low_pin)) {
if (gpio_get_value(bat ->pdata->batt_low_pin) == bat ->pdata->batt_low_level)
bat->bat_capacity = 0;
data ->suspend_time = get_seconds();
cancel_delayed_work(&data ->delay_work);
- if( data ->pdata->batt_low_pin != INVALID_GPIO){
+ if (batt_gpio_is_valid(data->pdata->batt_low_pin)) {
irq = gpio_to_irq(data ->pdata->batt_low_pin);
enable_irq(irq);
data ->resume_time = get_seconds();
data ->resume = true;
queue_delayed_work(data->wq, &data ->delay_work, msecs_to_jiffies(100));
- if( data ->pdata->batt_low_pin != INVALID_GPIO){
+ if (batt_gpio_is_valid(data->pdata->batt_low_pin)) {
irq = gpio_to_irq(data ->pdata ->batt_low_pin);
disable_irq_wake(irq);
unsigned long AdcTestCnt = 0;
static void rk30_adc_battery_timer_work(struct work_struct *work)
{
-struct rk30_adc_battery_data *bat = container_of((work), \
- struct rk30_adc_battery_data, delay_work);
+ struct rk30_adc_battery_data *bat = container_of((work), struct
+ rk30_adc_battery_data, delay_work.work);
#ifdef CONFIG_PM
if (bat ->resume) {
static int rk30_adc_battery_io_init(struct rk30_adc_battery_platform_data *pdata)
{
int ret = 0;
-
- if (pdata->io_init) {
- pdata->io_init();
- return 0;
- }
-
- //charge control pin
- if (pdata->charge_set_pin != INVALID_GPIO){
- ret = gpio_request(pdata->charge_set_pin, NULL);
- if (ret) {
- printk("failed to request dc_det gpio\n");
- goto error;
- }
- gpio_direction_output(pdata->charge_set_pin, 1 - pdata->charge_set_level);
- }
-
- //dc charge detect pin
- if (pdata->dc_det_pin != INVALID_GPIO){
+
+ if (batt_gpio_is_valid(pdata->dc_det_pin)) {
ret = gpio_request(pdata->dc_det_pin, NULL);
if (ret) {
- printk("failed to request dc_det gpio\n");
+ pr_info("failed to request dc_det gpio\n");
goto error;
}
- gpio_pull_updown(pdata->dc_det_pin, GPIOPullUp);//important
ret = gpio_direction_input(pdata->dc_det_pin);
if (ret) {
- printk("failed to set gpio dc_det input\n");
+ pr_info("failed to set gpio dc_det input\n");
goto error;
}
}
//charge ok detect
- if (pdata->charge_ok_pin != INVALID_GPIO){
+ if (batt_gpio_is_valid(pdata->charge_ok_pin)) {
ret = gpio_request(pdata->charge_ok_pin, NULL);
if (ret) {
- printk("failed to request charge_ok gpio\n");
+ pr_err("failed to request charge_ok gpio\n");
goto error;
}
- gpio_pull_updown(pdata->charge_ok_pin, GPIOPullUp);//important
ret = gpio_direction_input(pdata->charge_ok_pin);
if (ret) {
- printk("failed to set gpio charge_ok input\n");
+ pr_err("failed to set gpio charge_ok input\n");
goto error;
}
}
//batt low pin
- if( pdata->batt_low_pin != INVALID_GPIO){
+ if (batt_gpio_is_valid(pdata->batt_low_pin)) {
ret = gpio_request(pdata->batt_low_pin, NULL);
if (ret) {
- printk("failed to request batt_low_pin gpio\n");
+ pr_err("failed to request batt_low_pin gpio\n");
goto error;
}
- gpio_pull_updown(pdata->batt_low_pin, GPIOPullUp);
ret = gpio_direction_input(pdata->batt_low_pin);
if (ret) {
- printk("failed to set gpio batt_low_pin input\n");
+ pr_err("failed to set gpio batt_low_pin input\n");
goto error;
}
}
static int rk_adc_battery_poweron_status(struct rk30_adc_battery_data *bat)
{
int status;
+#if defined CONFIG_BATTERY_RK30_USB_CHARGE
int otg_status = 0;
+#endif
+
// struct rk30_adc_battery_platform_data *pdata = bat->pdata;
if (get_ac_status(bat) ){
//bat ->old_charge_level
// pSamples = bat->adc_samples;
- adc_sync_read(bat->client); //start adc sample
- DBG("first_adc_value is %d \n",bat->adc_val );
+ bat->adc_val = rk_adc_battery_iio_read(bat->pdata);
+
+ DBG("first_adc_value is %d\n", bat->adc_val);
level = oldlevel = rk_adc_battery_poweron_status(bat);// rk30_adc_battery_status_samples(bat);//init charge status
for (i = 0; i < NUM_VOLTAGE_SAMPLE; i++){ //0.3 s
mdelay(10);
check_data[i] = bat->adc_val;
- adc_async_read(bat->client);
+ bat->adc_val = rk_adc_battery_iio_read(bat->pdata);
bat->adc_value += check_data[i];
}
bat->adc_value /= NUM_VOLTAGE_SAMPLE;
#endif
if(0 !=bat ->pdata->low_voltage_protection ){
- if((bat->bat_voltage <= bat ->pdata->low_voltage_protection))
+ if (bat->bat_voltage <= bat->pdata->low_voltage_protection) {
system_lowerpower = 1;
printk("protection lower power .....\n");
+ }
}else{
- if((bat->bat_voltage <= BATT_ZERO_VOL_VALUE))
+ if (bat->bat_voltage <= BATT_ZERO_VOL_VALUE) {
system_lowerpower = 1;
- printk("lower power .....\n");
+ pr_info("lower power bat->bat_voltage = %d\n"
+ , bat->bat_voltage);
+ }
}
#if 0
}
-static void rk30_adc_battery_callback(struct adc_client *client, void *param, int result)
-{
- struct rk30_adc_battery_data *bat = container_of((client), \
- struct rk30_adc_battery_data, client);
-
- if (result < 0){
- DBG("adc_battery_callback resule < 0 , the value ");
- return;
- }else{
- gBatteryData->adc_val = result;
- DBG("result = %d, gBatteryData->adc_val = %d\n", result, gBatteryData->adc_val );
- }
- return;
-}
-
static void rk30_adc_battery_lowerpower_delaywork(struct work_struct *work)
{
int irq;
struct rk30_adc_battery_data *bat = container_of((work), \
struct rk30_adc_battery_data, lowerpower_work);
- if( bat->pdata->batt_low_pin != INVALID_GPIO){
+ if (batt_gpio_is_valid(bat->pdata->batt_low_pin)) {
irq = gpio_to_irq(bat ->pdata ->batt_low_pin);
disable_irq(irq);
}
printk("lowerpower\n");
- rk28_send_wakeup_key(); // wake up the system
return;
}
for(i=0; i< NUM_VOLTAGE_SAMPLE; i++){
mdelay(10);
- adc_async_read(bat->client);
+ bat->adc_val = rk_adc_battery_iio_read(bat->pdata);
check_data[i] = bat->adc_val;
adc_val += check_data[i];
}
static void rk_adc_battery_check_work(struct work_struct *work)
{
- struct rk30_adc_battery_data *bat = container_of((work), \
- struct rk30_adc_battery_data, check_work);
+ struct rk30_adc_battery_data *bat =
+ container_of((work), struct
+ rk30_adc_battery_data, check_work.work);
if(1 == get_ac_status(bat)){
bat->bat_status = POWER_SUPPLY_STATUS_CHARGING;
container_of(nb, struct rk30_adc_battery_data, battery_nb);
switch (event) {
- case LCDC_ON:
- DBG("LCDC on \n");
- rk_lowerpower_check(bat);//for lower power protect
- break;
+ case 1:
+ rk_lowerpower_check(bat);
+ break;
- case BACKLIGHT_ON:
- DBG("display \n");
- poweron_lowerpoer_handle(bat);
- break;
- default:
- return NOTIFY_OK;
- }
+ case 2:
+ poweron_lowerpoer_handle(bat);
+ break;
+ default:
+ return NOTIFY_OK;
+ }
return NOTIFY_OK;
}
+
+#ifdef CONFIG_OF
+static int rk31_adcbat_parse_dt(struct platform_device *pdev, struct
+rk30_adc_battery_platform_data *data)
+{
+ struct device_node *node = pdev->dev.of_node;
+ enum of_gpio_flags flags;
+ struct property *prop;
+ int length;
+ u32 value;
+ int ret;
+ int i;
+ size_t size;
+ struct iio_channel *chan;
+
+ if (!node)
+ return -ENODEV;
+
+ chan = iio_channel_get(&pdev->dev, NULL);
+ if (IS_ERR(chan))
+ pr_err("iio_channel_get fail\n");
+ data->chan = chan;
+
+ /* determine the number of config info */
+ prop = of_find_property(node, "bat_table", &length);
+ if (!prop)
+ return -EINVAL;
+
+ length /= sizeof(u32);
+
+ if (length > 0) {
+ size = (sizeof(*data->dts_batt_table)) * length;
+ data->dts_batt_table =
+ devm_kzalloc(&(pdev->dev), size, GFP_KERNEL);
+ if (!data->dts_batt_table)
+ return -ENOMEM;
+
+ ret = of_property_read_u32_array(node
+ , "bat_table", data->dts_batt_table, length);
+ if (ret < 0)
+ return ret;
+ }
+
+ for (i = 4; i < length; i++) {
+ batt_table[i] = data->dts_batt_table[i];
+
+ pr_info("data->dts_batt_table[ %d ] %d %d\n", i
+ , data->dts_batt_table[i], batt_table[i]);
+ }
+ data->dc_det_pin = of_get_named_gpio_flags(node
+ , "dc_det_gpio", 0, &flags);
+ if (data->dc_det_pin == -EPROBE_DEFER)
+ pr_info("%s dc_det_gpio error\n", __func__);
+
+ if (batt_gpio_is_valid(data->dc_det_pin))
+ data->dc_det_level = (flags & OF_GPIO_ACTIVE_LOW)
+ ? RK30_GPIO_LOW : RK30_GPIO_HIGH;
+
+ data->batt_low_pin = of_get_named_gpio_flags(node
+ , "bat_low_gpio", 0, &flags);
+ if (data->batt_low_pin == -EPROBE_DEFER)
+ pr_info("%s bat_low_gpio error\n", __func__);
+
+ if (batt_gpio_is_valid(data->batt_low_pin))
+ data->batt_low_level = (flags & OF_GPIO_ACTIVE_LOW)
+ ? RK30_GPIO_LOW : RK30_GPIO_HIGH;
+
+ data->charge_ok_pin = of_get_named_gpio_flags(node
+ , "chg_ok_gpio", 0, &flags);
+ if (data->charge_ok_pin == -EPROBE_DEFER)
+ pr_info("%s chg_ok_gpio error\n", __func__);
+
+ if (batt_gpio_is_valid(data->charge_ok_pin))
+ data->charge_ok_level = (flags & OF_GPIO_ACTIVE_LOW)
+ ? RK30_GPIO_LOW : RK30_GPIO_HIGH;
+
+ ret = of_property_read_u32(node, "is_dc_charge", &value);
+ if (ret < 0) {
+ pr_info("%s:hardware unsupport dc charge\n", __func__);
+ value = 0;
+ }
+ data->is_dc_charge = value;
+
+ ret = of_property_read_u32(node, "is_usb_charge"
+ , &value);
+ if (ret < 0) {
+ pr_err("%s:hardware unsupport usb charge\n", __func__);
+ value = 0;
+ }
+ data->is_usb_charge = value;
+
+ pr_info("rk30 battery:support %s %s charger\n",
+ data->is_dc_charge ? "DC" : ""
+ , data->is_usb_charge ? "USB" : "");
+
+ return 0;
+}
+#else
+static int rk31_adcbat_parse_dt(struct platform_device
+*dev, struct rk30_adc_battery_platform_data *data)
+{
+ return -ENODEV;
+}
+#endif
+
+
static int rk30_adc_battery_probe(struct platform_device *pdev)
{
int ret;
int irq;
int irq_flag;
- struct adc_client *client;
struct rk30_adc_battery_data *data;
- struct rk30_adc_battery_platform_data *pdata = pdev->dev.platform_data;
+ struct rk30_adc_battery_platform_data *pdata;
#ifdef CONFIG_MACH_RK_FAC
int i;
for(i=0;i<BATT_NUM;i++)
}
#endif
gSecondsCnt = get_seconds();
- data = kzalloc(sizeof(*data), GFP_KERNEL);
+ /*data = kzalloc(sizeof(*data), GFP_KERNEL);*/
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
if (data == NULL) {
ret = -ENOMEM;
goto err_data_alloc_failed;
}
+
+ /*pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);*/
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (pdata == NULL) {
+ ret = -ENOMEM;
+ goto err_pdata_alloc_failed;
+ }
memset(data, 0, sizeof(struct rk30_adc_battery_data));
gBatteryData = data;
-
platform_set_drvdata(pdev, data);
data->pdata = pdata;
data->bat_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
wake_lock_init(&batt_wake_lock, WAKE_LOCK_SUSPEND, "batt_lock");
wake_lock_init(&charge_display_lock, WAKE_LOCK_SUSPEND, "charge_display_lock"); //charge_display_lock
- wake_lock_init(&batt_wake_lock_detect_lowpower, WAKE_LOCK_SUSPEND, "lowpower_lock");
-
- ret = rk30_adc_battery_io_init(pdata);
+ wake_lock_init(&batt_wake_lock_detect_lowpower
+ , WAKE_LOCK_SUSPEND, "lowpower_lock");
+
+ ret = rk31_adcbat_parse_dt(pdev, data->pdata);
+ /*ret = rk31_adcbat_parse_dt(pdev, pdata);*/
+ if (ret < 0) {
+ pr_err("failed to find rk30 adc battery platform data\n");
+ goto err_io_init;
+ }
+
+ ret = rk30_adc_battery_io_init(data->pdata);
if (ret) {
ret = -EINVAL;
goto err_io_init;
memset(data->adc_samples, 0, sizeof(int)*(NUM_VOLTAGE_SAMPLE + 2));
//register adc for battery sample
- if(0 == pdata->adc_channel)
- client = adc_register(0, rk30_adc_battery_callback, NULL); //pdata->adc_channel = ani0
- else
- client = adc_register(pdata->adc_channel, rk30_adc_battery_callback, NULL);
- if(!client){
- ret = -EINVAL;
- goto err_adc_register_failed;
- }
+
data->wq = create_singlethread_workqueue("adc_battd");
//variable init
- data->client = client;
- data->adc_val = adc_sync_read(client);
+ /*data->client = client;*/
+ data->adc_val = rk_adc_battery_iio_read(data->pdata);
data ->bat = rk30_battery_supply;
ret = power_supply_register(&pdev->dev,&data ->bat);
goto err_ac_failed;
}
-#if defined (CONFIG_BATTERY_RK30_AC_CHARGE)
//init dc dectet irq & delay work
- if (pdata->dc_det_pin != INVALID_GPIO){
+ if (batt_gpio_is_valid(data->pdata->dc_det_pin)) {
INIT_WORK(&data->dcwakeup_work, rk30_adc_battery_dcdet_delaywork);
- irq = gpio_to_irq(pdata->dc_det_pin);
- irq_flag = gpio_get_value (pdata->dc_det_pin) ? IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING;
+ irq = gpio_to_irq(data->pdata->dc_det_pin);
+ irq_flag = gpio_get_value(data->pdata->dc_det_pin)
+ ? IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING;
ret = request_irq(irq, rk30_adc_battery_dc_wakeup, irq_flag, "ac_charge_irq", NULL);
if (ret) {
ret = -EINVAL;
enable_irq_wake(irq);
}
-#endif
#ifdef BATTERY_APK
ret = device_create_file(&pdev->dev,&dev_attr_batparam);
// data->wq = create_singlethread_workqueue("adc_battd");
INIT_DELAYED_WORK(&data->delay_work, rk30_adc_battery_timer_work);
- if(1 == pdata->save_capacity ){
+ if (1 == data->pdata->save_capacity) {
queue_delayed_work(data->wq, &data->delay_work, msecs_to_jiffies(TIMER_MS_COUNTS*10));
data ->poweron_check = 1;
}else{
}
INIT_DELAYED_WORK(&data->check_work, rk_adc_battery_check_work);
queue_delayed_work(data ->wq, &data ->check_work, msecs_to_jiffies(TIMER_MS_COUNTS));
- if( pdata->batt_low_pin != INVALID_GPIO){
-
- if (gpio_get_value(pdata->batt_low_pin) ==0){
- mdelay(20);
- if (gpio_get_value(pdata->batt_low_pin) ==0){
+ if (batt_gpio_is_valid(data->pdata->batt_low_pin)) {
+ if (0 == gpio_get_value(data->pdata->batt_low_pin)) {
+ mdelay(20);
+ if (gpio_get_value(data->pdata->batt_low_pin) == 0) {
printk("lower power\n");
kernel_power_off();
}
}
INIT_WORK(&data->lowerpower_work, rk30_adc_battery_lowerpower_delaywork);
- irq = gpio_to_irq(pdata->batt_low_pin);
+ irq = gpio_to_irq(data->pdata->batt_low_pin);
ret = request_irq(irq, rk30_adc_battery_low_wakeup, IRQF_TRIGGER_LOW, "batt_low_irq", NULL);
if (ret) {
ret = -EINVAL;
return 0;
err_sysfs:
-err_usb_failed:
power_supply_unregister(&data ->usb);
err_ac_failed:
power_supply_unregister(&data ->ac);
power_supply_unregister(&data ->bat);
err_dcirq_failed:
- if (pdata->dc_det_pin != INVALID_GPIO){
- free_irq(gpio_to_irq(pdata->dc_det_pin), data);
- }
+ if (batt_gpio_is_valid(data->pdata->dc_det_pin))
+ free_irq(gpio_to_irq(data->pdata->dc_det_pin), data);
#if 1
err_lowpowerirq_failed:
- if( pdata->batt_low_pin != INVALID_GPIO){
- free_irq(gpio_to_irq(pdata->batt_low_pin), data);
- }
+ if (batt_gpio_is_valid(data->pdata->batt_low_pin))
+ free_irq(gpio_to_irq(data->pdata->batt_low_pin), data);
+
#endif
-err_adc_register_failed:
-err_io_init:
+err_io_init:
+
+err_pdata_alloc_failed:
+ kfree(pdata);
err_data_alloc_failed:
kfree(data);
static int rk30_adc_battery_remove(struct platform_device *pdev)
{
struct rk30_adc_battery_data *data = platform_get_drvdata(pdev);
- struct rk30_adc_battery_platform_data *pdata = pdev->dev.platform_data;
+ struct rk30_adc_battery_platform_data *pdata = data->pdata;
cancel_delayed_work_sync(&data->delay_work);
-#if defined (CONFIG_BATTERY_RK30_AC_CHARGE)
- if (pdata->dc_det_pin != INVALID_GPIO)
- cancel_delayed_work_sync(&data->dcwakeup_work);
-#endif
+ if (batt_gpio_is_valid(pdata->dc_det_pin))
+ cancel_work_sync(&data->dcwakeup_work);
cancel_delayed_work_sync(&data->check_work);
- if( pdata->batt_low_pin != INVALID_GPIO)
- cancel_delayed_work_sync(&data->lowerpower_work);
+ if (batt_gpio_is_valid(pdata->batt_low_pin))
+ cancel_work_sync(&data->lowerpower_work);
#if defined (CONFIG_BATTERY_RK30_USB_CHARGE)
power_supply_unregister(&data ->usb);
#endif
power_supply_unregister(&data ->ac);
power_supply_unregister(&data ->bat);
- if (pdata->dc_det_pin != INVALID_GPIO)
+ if (batt_gpio_is_valid(pdata->dc_det_pin))
free_irq(gpio_to_irq(pdata->dc_det_pin), data);
kfree(data);
return 0;
}
+#ifdef CONFIG_OF
+static const struct of_device_id rk30_adc_battery_dt_match[] = {
+ { .compatible = "rk30-adc-battery",},
+ {},
+};
+MODULE_DEVICE_TABLE(of, rk30_adc_battery_dt_match);
+#endif
+
+
static struct platform_driver rk30_adc_battery_driver = {
.probe = rk30_adc_battery_probe,
.remove = rk30_adc_battery_remove,
.suspend = rk30_adc_battery_suspend,
.resume = rk30_adc_battery_resume,
.driver = {
- .name = "rk30-battery",
+ .name = "rk30-adc-battery",
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(rk30_adc_battery_dt_match),
}
};
//fs_initcall(rk30_adc_battery_init);
module_exit(rk30_adc_battery_exit);
+
+
MODULE_DESCRIPTION("Battery detect driver for the rk30");
MODULE_AUTHOR("luowei lw@rock-chips.com");
MODULE_LICENSE("GPL");
projects / firefly-linux-kernel-4.4.55.git / commitdiff