/* Wait this long before releasing periodic reservation */
#define DWC2_UNRESERVE_DELAY (msecs_to_jiffies(5))
-/**
- * dwc2_do_unreserve() - Actually release the periodic reservation
- *
- * This function actually releases the periodic bandwidth that was reserved
- * by the given qh.
- *
- * @hsotg: The HCD state structure for the DWC OTG controller
- * @qh: QH for the periodic transfer.
- */
-static void dwc2_do_unreserve(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
-{
- assert_spin_locked(&hsotg->lock);
-
- WARN_ON(!qh->unreserve_pending);
-
- /* No more unreserve pending--we're doing it */
- qh->unreserve_pending = false;
-
- if (WARN_ON(!list_empty(&qh->qh_list_entry)))
- list_del_init(&qh->qh_list_entry);
-
- /* Update claimed usecs per (micro)frame */
- hsotg->periodic_usecs -= qh->host_us;
-
- if (hsotg->core_params->uframe_sched > 0) {
- int i;
-
- for (i = 0; i < 8; i++) {
- hsotg->frame_usecs[i] += qh->frame_usecs[i];
- qh->frame_usecs[i] = 0;
- }
- } else {
- /* Release periodic channel reservation */
- hsotg->periodic_channels--;
- }
-}
-
-/**
- * dwc2_unreserve_timer_fn() - Timer function to release periodic reservation
- *
- * According to the kernel doc for usb_submit_urb() (specifically the part about
- * "Reserved Bandwidth Transfers"), we need to keep a reservation active as
- * long as a device driver keeps submitting. Since we're using HCD_BH to give
- * back the URB we need to give the driver a little bit of time before we
- * release the reservation. This worker is called after the appropriate
- * delay.
- *
- * @work: Pointer to a qh unreserve_work.
- */
-static void dwc2_unreserve_timer_fn(unsigned long data)
-{
- struct dwc2_qh *qh = (struct dwc2_qh *)data;
- struct dwc2_hsotg *hsotg = qh->hsotg;
- unsigned long flags;
-
- /*
- * Wait for the lock, or for us to be scheduled again. We
- * could be scheduled again if:
- * - We started executing but didn't get the lock yet.
- * - A new reservation came in, but cancel didn't take effect
- * because we already started executing.
- * - The timer has been kicked again.
- * In that case cancel and wait for the next call.
- */
- while (!spin_trylock_irqsave(&hsotg->lock, flags)) {
- if (timer_pending(&qh->unreserve_timer))
- return;
- }
-
- /*
- * Might be no more unreserve pending if:
- * - We started executing but didn't get the lock yet.
- * - A new reservation came in, but cancel didn't take effect
- * because we already started executing.
- *
- * We can't put this in the loop above because unreserve_pending needs
- * to be accessed under lock, so we can only check it once we got the
- * lock.
- */
- if (qh->unreserve_pending)
- dwc2_do_unreserve(hsotg, qh);
-
- spin_unlock_irqrestore(&hsotg->lock, flags);
-}
-
-/**
- * dwc2_qh_init() - Initializes a QH structure
- *
- * @hsotg: The HCD state structure for the DWC OTG controller
- * @qh: The QH to init
- * @urb: Holds the information about the device/endpoint needed to initialize
- * the QH
- */
-#define SCHEDULE_SLOP 10
-static void dwc2_qh_init(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh,
- struct dwc2_hcd_urb *urb)
-{
- int dev_speed, hub_addr, hub_port;
- char *speed, *type;
-
- dev_vdbg(hsotg->dev, "%s()\n", __func__);
-
- /* Initialize QH */
- qh->hsotg = hsotg;
- setup_timer(&qh->unreserve_timer, dwc2_unreserve_timer_fn,
- (unsigned long)qh);
- qh->ep_type = dwc2_hcd_get_pipe_type(&urb->pipe_info);
- qh->ep_is_in = dwc2_hcd_is_pipe_in(&urb->pipe_info) ? 1 : 0;
-
- qh->data_toggle = DWC2_HC_PID_DATA0;
- qh->maxp = dwc2_hcd_get_mps(&urb->pipe_info);
- INIT_LIST_HEAD(&qh->qtd_list);
- INIT_LIST_HEAD(&qh->qh_list_entry);
-
- /* FS/LS Endpoint on HS Hub, NOT virtual root hub */
- dev_speed = dwc2_host_get_speed(hsotg, urb->priv);
-
- dwc2_host_hub_info(hsotg, urb->priv, &hub_addr, &hub_port);
-
- if ((dev_speed == USB_SPEED_LOW || dev_speed == USB_SPEED_FULL) &&
- hub_addr != 0 && hub_addr != 1) {
- dev_vdbg(hsotg->dev,
- "QH init: EP %d: TT found at hub addr %d, for port %d\n",
- dwc2_hcd_get_ep_num(&urb->pipe_info), hub_addr,
- hub_port);
- qh->do_split = 1;
- }
-
- if (qh->ep_type == USB_ENDPOINT_XFER_INT ||
- qh->ep_type == USB_ENDPOINT_XFER_ISOC) {
- /* Compute scheduling parameters once and save them */
- u32 hprt, prtspd;
-
- /* Todo: Account for split transfers in the bus time */
- int bytecount =
- dwc2_hb_mult(qh->maxp) * dwc2_max_packet(qh->maxp);
-
- qh->host_us = NS_TO_US(usb_calc_bus_time(qh->do_split ?
- USB_SPEED_HIGH : dev_speed, qh->ep_is_in,
- qh->ep_type == USB_ENDPOINT_XFER_ISOC,
- bytecount));
-
- /* Ensure frame_number corresponds to the reality */
- hsotg->frame_number = dwc2_hcd_get_frame_number(hsotg);
- /* Start in a slightly future (micro)frame */
- qh->next_active_frame = dwc2_frame_num_inc(hsotg->frame_number,
- SCHEDULE_SLOP);
- qh->host_interval = urb->interval;
- dwc2_sch_dbg(hsotg, "QH=%p init nxt=%04x, fn=%04x, int=%#x\n",
- qh, qh->next_active_frame, hsotg->frame_number,
- qh->host_interval);
-#if 0
- /* Increase interrupt polling rate for debugging */
- if (qh->ep_type == USB_ENDPOINT_XFER_INT)
- qh->host_interval = 8;
-#endif
- hprt = dwc2_readl(hsotg->regs + HPRT0);
- prtspd = (hprt & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT;
- if (prtspd == HPRT0_SPD_HIGH_SPEED &&
- (dev_speed == USB_SPEED_LOW ||
- dev_speed == USB_SPEED_FULL)) {
- qh->host_interval *= 8;
- qh->next_active_frame |= 0x7;
- qh->start_split_frame = qh->next_active_frame;
- dwc2_sch_dbg(hsotg,
- "QH=%p init*8 nxt=%04x, fn=%04x, int=%#x\n",
- qh, qh->next_active_frame,
- hsotg->frame_number, qh->host_interval);
-
- }
- dev_dbg(hsotg->dev, "interval=%d\n", qh->host_interval);
- }
-
- dev_vdbg(hsotg->dev, "DWC OTG HCD QH Initialized\n");
- dev_vdbg(hsotg->dev, "DWC OTG HCD QH - qh = %p\n", qh);
- dev_vdbg(hsotg->dev, "DWC OTG HCD QH - Device Address = %d\n",
- dwc2_hcd_get_dev_addr(&urb->pipe_info));
- dev_vdbg(hsotg->dev, "DWC OTG HCD QH - Endpoint %d, %s\n",
- dwc2_hcd_get_ep_num(&urb->pipe_info),
- dwc2_hcd_is_pipe_in(&urb->pipe_info) ? "IN" : "OUT");
-
- qh->dev_speed = dev_speed;
-
- switch (dev_speed) {
- case USB_SPEED_LOW:
- speed = "low";
- break;
- case USB_SPEED_FULL:
- speed = "full";
- break;
- case USB_SPEED_HIGH:
- speed = "high";
- break;
- default:
- speed = "?";
- break;
- }
- dev_vdbg(hsotg->dev, "DWC OTG HCD QH - Speed = %s\n", speed);
-
- switch (qh->ep_type) {
- case USB_ENDPOINT_XFER_ISOC:
- type = "isochronous";
- break;
- case USB_ENDPOINT_XFER_INT:
- type = "interrupt";
- break;
- case USB_ENDPOINT_XFER_CONTROL:
- type = "control";
- break;
- case USB_ENDPOINT_XFER_BULK:
- type = "bulk";
- break;
- default:
- type = "?";
- break;
- }
-
- dev_vdbg(hsotg->dev, "DWC OTG HCD QH - Type = %s\n", type);
-
- if (qh->ep_type == USB_ENDPOINT_XFER_INT) {
- dev_vdbg(hsotg->dev, "DWC OTG HCD QH - usecs = %d\n",
- qh->host_us);
- dev_vdbg(hsotg->dev, "DWC OTG HCD QH - interval = %d\n",
- qh->host_interval);
- }
-}
-
-/**
- * dwc2_hcd_qh_create() - Allocates and initializes a QH
- *
- * @hsotg: The HCD state structure for the DWC OTG controller
- * @urb: Holds the information about the device/endpoint needed
- * to initialize the QH
- * @atomic_alloc: Flag to do atomic allocation if needed
- *
- * Return: Pointer to the newly allocated QH, or NULL on error
- */
-struct dwc2_qh *dwc2_hcd_qh_create(struct dwc2_hsotg *hsotg,
- struct dwc2_hcd_urb *urb,
- gfp_t mem_flags)
-{
- struct dwc2_qh *qh;
-
- if (!urb->priv)
- return NULL;
-
- /* Allocate memory */
- qh = kzalloc(sizeof(*qh), mem_flags);
- if (!qh)
- return NULL;
-
- dwc2_qh_init(hsotg, qh, urb);
-
- if (hsotg->core_params->dma_desc_enable > 0 &&
- dwc2_hcd_qh_init_ddma(hsotg, qh, mem_flags) < 0) {
- dwc2_hcd_qh_free(hsotg, qh);
- return NULL;
- }
-
- return qh;
-}
-
-/**
- * dwc2_hcd_qh_free() - Frees the QH
- *
- * @hsotg: HCD instance
- * @qh: The QH to free
- *
- * QH should already be removed from the list. QTD list should already be empty
- * if called from URB Dequeue.
- *
- * Must NOT be called with interrupt disabled or spinlock held
- */
-void dwc2_hcd_qh_free(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
-{
- /* Make sure any unreserve work is finished. */
- if (del_timer_sync(&qh->unreserve_timer)) {
- unsigned long flags;
-
- spin_lock_irqsave(&hsotg->lock, flags);
- dwc2_do_unreserve(hsotg, qh);
- spin_unlock_irqrestore(&hsotg->lock, flags);
- }
-
- if (qh->desc_list)
- dwc2_hcd_qh_free_ddma(hsotg, qh);
- kfree(qh);
-}
-
/**
* dwc2_periodic_channel_available() - Checks that a channel is available for a
* periodic transfer
static int dwc2_find_uframe(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
{
- int ret;
+ int ret;
+
+ if (qh->dev_speed == USB_SPEED_HIGH) {
+ /* if this is a hs transaction we need a full frame */
+ ret = dwc2_find_single_uframe(hsotg, qh);
+ } else {
+ /*
+ * if this is a fs transaction we may need a sequence
+ * of frames
+ */
+ ret = dwc2_find_multi_uframe(hsotg, qh);
+ }
+ return ret;
+}
+
+/**
+ * dwc2_do_unreserve() - Actually release the periodic reservation
+ *
+ * This function actually releases the periodic bandwidth that was reserved
+ * by the given qh.
+ *
+ * @hsotg: The HCD state structure for the DWC OTG controller
+ * @qh: QH for the periodic transfer.
+ */
+static void dwc2_do_unreserve(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
+{
+ assert_spin_locked(&hsotg->lock);
+
+ WARN_ON(!qh->unreserve_pending);
+
+ /* No more unreserve pending--we're doing it */
+ qh->unreserve_pending = false;
+
+ if (WARN_ON(!list_empty(&qh->qh_list_entry)))
+ list_del_init(&qh->qh_list_entry);
+
+ /* Update claimed usecs per (micro)frame */
+ hsotg->periodic_usecs -= qh->host_us;
+
+ if (hsotg->core_params->uframe_sched > 0) {
+ int i;
+
+ for (i = 0; i < 8; i++) {
+ hsotg->frame_usecs[i] += qh->frame_usecs[i];
+ qh->frame_usecs[i] = 0;
+ }
+ } else {
+ /* Release periodic channel reservation */
+ hsotg->periodic_channels--;
+ }
+}
+
+/**
+ * dwc2_unreserve_timer_fn() - Timer function to release periodic reservation
+ *
+ * According to the kernel doc for usb_submit_urb() (specifically the part about
+ * "Reserved Bandwidth Transfers"), we need to keep a reservation active as
+ * long as a device driver keeps submitting. Since we're using HCD_BH to give
+ * back the URB we need to give the driver a little bit of time before we
+ * release the reservation. This worker is called after the appropriate
+ * delay.
+ *
+ * @work: Pointer to a qh unreserve_work.
+ */
+static void dwc2_unreserve_timer_fn(unsigned long data)
+{
+ struct dwc2_qh *qh = (struct dwc2_qh *)data;
+ struct dwc2_hsotg *hsotg = qh->hsotg;
+ unsigned long flags;
- if (qh->dev_speed == USB_SPEED_HIGH) {
- /* if this is a hs transaction we need a full frame */
- ret = dwc2_find_single_uframe(hsotg, qh);
- } else {
- /*
- * if this is a fs transaction we may need a sequence
- * of frames
- */
- ret = dwc2_find_multi_uframe(hsotg, qh);
+ /*
+ * Wait for the lock, or for us to be scheduled again. We
+ * could be scheduled again if:
+ * - We started executing but didn't get the lock yet.
+ * - A new reservation came in, but cancel didn't take effect
+ * because we already started executing.
+ * - The timer has been kicked again.
+ * In that case cancel and wait for the next call.
+ */
+ while (!spin_trylock_irqsave(&hsotg->lock, flags)) {
+ if (timer_pending(&qh->unreserve_timer))
+ return;
}
- return ret;
+
+ /*
+ * Might be no more unreserve pending if:
+ * - We started executing but didn't get the lock yet.
+ * - A new reservation came in, but cancel didn't take effect
+ * because we already started executing.
+ *
+ * We can't put this in the loop above because unreserve_pending needs
+ * to be accessed under lock, so we can only check it once we got the
+ * lock.
+ */
+ if (qh->unreserve_pending)
+ dwc2_do_unreserve(hsotg, qh);
+
+ spin_unlock_irqrestore(&hsotg->lock, flags);
}
/**
list_del_init(&qh->qh_list_entry);
}
+/**
+ * dwc2_qh_init() - Initializes a QH structure
+ *
+ * @hsotg: The HCD state structure for the DWC OTG controller
+ * @qh: The QH to init
+ * @urb: Holds the information about the device/endpoint needed to initialize
+ * the QH
+ */
+#define SCHEDULE_SLOP 10
+static void dwc2_qh_init(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh,
+ struct dwc2_hcd_urb *urb)
+{
+ int dev_speed, hub_addr, hub_port;
+ char *speed, *type;
+
+ dev_vdbg(hsotg->dev, "%s()\n", __func__);
+
+ /* Initialize QH */
+ qh->hsotg = hsotg;
+ setup_timer(&qh->unreserve_timer, dwc2_unreserve_timer_fn,
+ (unsigned long)qh);
+ qh->ep_type = dwc2_hcd_get_pipe_type(&urb->pipe_info);
+ qh->ep_is_in = dwc2_hcd_is_pipe_in(&urb->pipe_info) ? 1 : 0;
+
+ qh->data_toggle = DWC2_HC_PID_DATA0;
+ qh->maxp = dwc2_hcd_get_mps(&urb->pipe_info);
+ INIT_LIST_HEAD(&qh->qtd_list);
+ INIT_LIST_HEAD(&qh->qh_list_entry);
+
+ /* FS/LS Endpoint on HS Hub, NOT virtual root hub */
+ dev_speed = dwc2_host_get_speed(hsotg, urb->priv);
+
+ dwc2_host_hub_info(hsotg, urb->priv, &hub_addr, &hub_port);
+
+ if ((dev_speed == USB_SPEED_LOW || dev_speed == USB_SPEED_FULL) &&
+ hub_addr != 0 && hub_addr != 1) {
+ dev_vdbg(hsotg->dev,
+ "QH init: EP %d: TT found at hub addr %d, for port %d\n",
+ dwc2_hcd_get_ep_num(&urb->pipe_info), hub_addr,
+ hub_port);
+ qh->do_split = 1;
+ }
+
+ if (qh->ep_type == USB_ENDPOINT_XFER_INT ||
+ qh->ep_type == USB_ENDPOINT_XFER_ISOC) {
+ /* Compute scheduling parameters once and save them */
+ u32 hprt, prtspd;
+
+ /* Todo: Account for split transfers in the bus time */
+ int bytecount =
+ dwc2_hb_mult(qh->maxp) * dwc2_max_packet(qh->maxp);
+
+ qh->host_us = NS_TO_US(usb_calc_bus_time(qh->do_split ?
+ USB_SPEED_HIGH : dev_speed, qh->ep_is_in,
+ qh->ep_type == USB_ENDPOINT_XFER_ISOC,
+ bytecount));
+
+ /* Ensure frame_number corresponds to the reality */
+ hsotg->frame_number = dwc2_hcd_get_frame_number(hsotg);
+ /* Start in a slightly future (micro)frame */
+ qh->next_active_frame = dwc2_frame_num_inc(hsotg->frame_number,
+ SCHEDULE_SLOP);
+ qh->host_interval = urb->interval;
+ dwc2_sch_dbg(hsotg, "QH=%p init nxt=%04x, fn=%04x, int=%#x\n",
+ qh, qh->next_active_frame, hsotg->frame_number,
+ qh->host_interval);
+#if 0
+ /* Increase interrupt polling rate for debugging */
+ if (qh->ep_type == USB_ENDPOINT_XFER_INT)
+ qh->host_interval = 8;
+#endif
+ hprt = dwc2_readl(hsotg->regs + HPRT0);
+ prtspd = (hprt & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT;
+ if (prtspd == HPRT0_SPD_HIGH_SPEED &&
+ (dev_speed == USB_SPEED_LOW ||
+ dev_speed == USB_SPEED_FULL)) {
+ qh->host_interval *= 8;
+ qh->next_active_frame |= 0x7;
+ qh->start_split_frame = qh->next_active_frame;
+ dwc2_sch_dbg(hsotg,
+ "QH=%p init*8 nxt=%04x, fn=%04x, int=%#x\n",
+ qh, qh->next_active_frame,
+ hsotg->frame_number, qh->host_interval);
+
+ }
+ dev_dbg(hsotg->dev, "interval=%d\n", qh->host_interval);
+ }
+
+ dev_vdbg(hsotg->dev, "DWC OTG HCD QH Initialized\n");
+ dev_vdbg(hsotg->dev, "DWC OTG HCD QH - qh = %p\n", qh);
+ dev_vdbg(hsotg->dev, "DWC OTG HCD QH - Device Address = %d\n",
+ dwc2_hcd_get_dev_addr(&urb->pipe_info));
+ dev_vdbg(hsotg->dev, "DWC OTG HCD QH - Endpoint %d, %s\n",
+ dwc2_hcd_get_ep_num(&urb->pipe_info),
+ dwc2_hcd_is_pipe_in(&urb->pipe_info) ? "IN" : "OUT");
+
+ qh->dev_speed = dev_speed;
+
+ switch (dev_speed) {
+ case USB_SPEED_LOW:
+ speed = "low";
+ break;
+ case USB_SPEED_FULL:
+ speed = "full";
+ break;
+ case USB_SPEED_HIGH:
+ speed = "high";
+ break;
+ default:
+ speed = "?";
+ break;
+ }
+ dev_vdbg(hsotg->dev, "DWC OTG HCD QH - Speed = %s\n", speed);
+
+ switch (qh->ep_type) {
+ case USB_ENDPOINT_XFER_ISOC:
+ type = "isochronous";
+ break;
+ case USB_ENDPOINT_XFER_INT:
+ type = "interrupt";
+ break;
+ case USB_ENDPOINT_XFER_CONTROL:
+ type = "control";
+ break;
+ case USB_ENDPOINT_XFER_BULK:
+ type = "bulk";
+ break;
+ default:
+ type = "?";
+ break;
+ }
+
+ dev_vdbg(hsotg->dev, "DWC OTG HCD QH - Type = %s\n", type);
+
+ if (qh->ep_type == USB_ENDPOINT_XFER_INT) {
+ dev_vdbg(hsotg->dev, "DWC OTG HCD QH - usecs = %d\n",
+ qh->host_us);
+ dev_vdbg(hsotg->dev, "DWC OTG HCD QH - interval = %d\n",
+ qh->host_interval);
+ }
+}
+
+/**
+ * dwc2_hcd_qh_create() - Allocates and initializes a QH
+ *
+ * @hsotg: The HCD state structure for the DWC OTG controller
+ * @urb: Holds the information about the device/endpoint needed
+ * to initialize the QH
+ * @atomic_alloc: Flag to do atomic allocation if needed
+ *
+ * Return: Pointer to the newly allocated QH, or NULL on error
+ */
+struct dwc2_qh *dwc2_hcd_qh_create(struct dwc2_hsotg *hsotg,
+ struct dwc2_hcd_urb *urb,
+ gfp_t mem_flags)
+{
+ struct dwc2_qh *qh;
+
+ if (!urb->priv)
+ return NULL;
+
+ /* Allocate memory */
+ qh = kzalloc(sizeof(*qh), mem_flags);
+ if (!qh)
+ return NULL;
+
+ dwc2_qh_init(hsotg, qh, urb);
+
+ if (hsotg->core_params->dma_desc_enable > 0 &&
+ dwc2_hcd_qh_init_ddma(hsotg, qh, mem_flags) < 0) {
+ dwc2_hcd_qh_free(hsotg, qh);
+ return NULL;
+ }
+
+ return qh;
+}
+
+/**
+ * dwc2_hcd_qh_free() - Frees the QH
+ *
+ * @hsotg: HCD instance
+ * @qh: The QH to free
+ *
+ * QH should already be removed from the list. QTD list should already be empty
+ * if called from URB Dequeue.
+ *
+ * Must NOT be called with interrupt disabled or spinlock held
+ */
+void dwc2_hcd_qh_free(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
+{
+ /* Make sure any unreserve work is finished. */
+ if (del_timer_sync(&qh->unreserve_timer)) {
+ unsigned long flags;
+
+ spin_lock_irqsave(&hsotg->lock, flags);
+ dwc2_do_unreserve(hsotg, qh);
+ spin_unlock_irqrestore(&hsotg->lock, flags);
+ }
+
+ if (qh->desc_list)
+ dwc2_hcd_qh_free_ddma(hsotg, qh);
+ kfree(qh);
+}
+
/**
* dwc2_hcd_qh_add() - Adds a QH to either the non periodic or periodic
* schedule if it is not already in the schedule. If the QH is already in
projects / firefly-linux-kernel-4.4.55.git / commitdiff