RK3368 DDR: new ddr change freq method
[firefly-linux-kernel-4.4.55.git] / kernel / context_tracking.c
1 /*
2  * Context tracking: Probe on high level context boundaries such as kernel
3  * and userspace. This includes syscalls and exceptions entry/exit.
4  *
5  * This is used by RCU to remove its dependency on the timer tick while a CPU
6  * runs in userspace.
7  *
8  *  Started by Frederic Weisbecker:
9  *
10  * Copyright (C) 2012 Red Hat, Inc., Frederic Weisbecker <fweisbec@redhat.com>
11  *
12  * Many thanks to Gilad Ben-Yossef, Paul McKenney, Ingo Molnar, Andrew Morton,
13  * Steven Rostedt, Peter Zijlstra for suggestions and improvements.
14  *
15  */
16
17 #include <linux/context_tracking.h>
18 #include <linux/rcupdate.h>
19 #include <linux/sched.h>
20 #include <linux/hardirq.h>
21 #include <linux/export.h>
22
23 DEFINE_PER_CPU(struct context_tracking, context_tracking) = {
24 #ifdef CONFIG_CONTEXT_TRACKING_FORCE
25         .active = true,
26 #endif
27 };
28
29 /**
30  * user_enter - Inform the context tracking that the CPU is going to
31  *              enter userspace mode.
32  *
33  * This function must be called right before we switch from the kernel
34  * to userspace, when it's guaranteed the remaining kernel instructions
35  * to execute won't use any RCU read side critical section because this
36  * function sets RCU in extended quiescent state.
37  */
38 void user_enter(void)
39 {
40         unsigned long flags;
41
42         /*
43          * Some contexts may involve an exception occuring in an irq,
44          * leading to that nesting:
45          * rcu_irq_enter() rcu_user_exit() rcu_user_exit() rcu_irq_exit()
46          * This would mess up the dyntick_nesting count though. And rcu_irq_*()
47          * helpers are enough to protect RCU uses inside the exception. So
48          * just return immediately if we detect we are in an IRQ.
49          */
50         if (in_interrupt())
51                 return;
52
53         /* Kernel threads aren't supposed to go to userspace */
54         WARN_ON_ONCE(!current->mm);
55
56         local_irq_save(flags);
57         if (__this_cpu_read(context_tracking.active) &&
58             __this_cpu_read(context_tracking.state) != IN_USER) {
59                 /*
60                  * At this stage, only low level arch entry code remains and
61                  * then we'll run in userspace. We can assume there won't be
62                  * any RCU read-side critical section until the next call to
63                  * user_exit() or rcu_irq_enter(). Let's remove RCU's dependency
64                  * on the tick.
65                  */
66                 vtime_user_enter(current);
67                 rcu_user_enter();
68                 __this_cpu_write(context_tracking.state, IN_USER);
69         }
70         local_irq_restore(flags);
71 }
72
73 #ifdef CONFIG_PREEMPT
74 /**
75  * preempt_schedule_context - preempt_schedule called by tracing
76  *
77  * The tracing infrastructure uses preempt_enable_notrace to prevent
78  * recursion and tracing preempt enabling caused by the tracing
79  * infrastructure itself. But as tracing can happen in areas coming
80  * from userspace or just about to enter userspace, a preempt enable
81  * can occur before user_exit() is called. This will cause the scheduler
82  * to be called when the system is still in usermode.
83  *
84  * To prevent this, the preempt_enable_notrace will use this function
85  * instead of preempt_schedule() to exit user context if needed before
86  * calling the scheduler.
87  */
88 void __sched notrace preempt_schedule_context(void)
89 {
90         struct thread_info *ti = current_thread_info();
91         enum ctx_state prev_ctx;
92
93         if (likely(ti->preempt_count || irqs_disabled()))
94                 return;
95
96         /*
97          * Need to disable preemption in case user_exit() is traced
98          * and the tracer calls preempt_enable_notrace() causing
99          * an infinite recursion.
100          */
101         preempt_disable_notrace();
102         prev_ctx = exception_enter();
103         preempt_enable_no_resched_notrace();
104
105         preempt_schedule();
106
107         preempt_disable_notrace();
108         exception_exit(prev_ctx);
109         preempt_enable_notrace();
110 }
111 EXPORT_SYMBOL_GPL(preempt_schedule_context);
112 #endif /* CONFIG_PREEMPT */
113
114 /**
115  * user_exit - Inform the context tracking that the CPU is
116  *             exiting userspace mode and entering the kernel.
117  *
118  * This function must be called after we entered the kernel from userspace
119  * before any use of RCU read side critical section. This potentially include
120  * any high level kernel code like syscalls, exceptions, signal handling, etc...
121  *
122  * This call supports re-entrancy. This way it can be called from any exception
123  * handler without needing to know if we came from userspace or not.
124  */
125 void user_exit(void)
126 {
127         unsigned long flags;
128
129         if (in_interrupt())
130                 return;
131
132         local_irq_save(flags);
133         if (__this_cpu_read(context_tracking.state) == IN_USER) {
134                 /*
135                  * We are going to run code that may use RCU. Inform
136                  * RCU core about that (ie: we may need the tick again).
137                  */
138                 rcu_user_exit();
139                 vtime_user_exit(current);
140                 __this_cpu_write(context_tracking.state, IN_KERNEL);
141         }
142         local_irq_restore(flags);
143 }
144
145 void guest_enter(void)
146 {
147         if (vtime_accounting_enabled())
148                 vtime_guest_enter(current);
149         else
150                 __guest_enter();
151 }
152 EXPORT_SYMBOL_GPL(guest_enter);
153
154 void guest_exit(void)
155 {
156         if (vtime_accounting_enabled())
157                 vtime_guest_exit(current);
158         else
159                 __guest_exit();
160 }
161 EXPORT_SYMBOL_GPL(guest_exit);
162
163
164 /**
165  * context_tracking_task_switch - context switch the syscall callbacks
166  * @prev: the task that is being switched out
167  * @next: the task that is being switched in
168  *
169  * The context tracking uses the syscall slow path to implement its user-kernel
170  * boundaries probes on syscalls. This way it doesn't impact the syscall fast
171  * path on CPUs that don't do context tracking.
172  *
173  * But we need to clear the flag on the previous task because it may later
174  * migrate to some CPU that doesn't do the context tracking. As such the TIF
175  * flag may not be desired there.
176  */
177 void context_tracking_task_switch(struct task_struct *prev,
178                              struct task_struct *next)
179 {
180         if (__this_cpu_read(context_tracking.active)) {
181                 clear_tsk_thread_flag(prev, TIF_NOHZ);
182                 set_tsk_thread_flag(next, TIF_NOHZ);
183         }
184 }