Merge branch 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszer...
[firefly-linux-kernel-4.4.55.git] / include / misc / cxl.h
1 /*
2  * Copyright 2015 IBM Corp.
3  *
4  * This program is free software; you can redistribute it and/or
5  * modify it under the terms of the GNU General Public License
6  * as published by the Free Software Foundation; either version
7  * 2 of the License, or (at your option) any later version.
8  */
9
10 #ifndef _MISC_CXL_H
11 #define _MISC_CXL_H
12
13 #include <linux/pci.h>
14 #include <linux/poll.h>
15 #include <linux/interrupt.h>
16 #include <uapi/misc/cxl.h>
17
18 /*
19  * This documents the in kernel API for driver to use CXL. It allows kernel
20  * drivers to bind to AFUs using an AFU configuration record exposed as a PCI
21  * configuration record.
22  *
23  * This API enables control over AFU and contexts which can't be part of the
24  * generic PCI API. This API is agnostic to the actual AFU.
25  */
26
27 /* Get the AFU associated with a pci_dev */
28 struct cxl_afu *cxl_pci_to_afu(struct pci_dev *dev);
29
30 /* Get the AFU conf record number associated with a pci_dev */
31 unsigned int cxl_pci_to_cfg_record(struct pci_dev *dev);
32
33 /* Get the physical device (ie. the PCIe card) which the AFU is attached */
34 struct device *cxl_get_phys_dev(struct pci_dev *dev);
35
36
37 /*
38  * Context lifetime overview:
39  *
40  * An AFU context may be inited and then started and stoppped multiple times
41  * before it's released. ie.
42  *    - cxl_dev_context_init()
43  *      - cxl_start_context()
44  *      - cxl_stop_context()
45  *      - cxl_start_context()
46  *      - cxl_stop_context()
47  *     ...repeat...
48  *    - cxl_release_context()
49  * Once released, a context can't be started again.
50  *
51  * One context is inited by the cxl driver for every pci_dev. This is to be
52  * used as a default kernel context. cxl_get_context() will get this
53  * context. This context will be released by PCI hot unplug, so doesn't need to
54  * be released explicitly by drivers.
55  *
56  * Additional kernel contexts may be inited using cxl_dev_context_init().
57  * These must be released using cxl_context_detach().
58  *
59  * Once a context has been inited, IRQs may be configured. Firstly these IRQs
60  * must be allocated (cxl_allocate_afu_irqs()), then individually mapped to
61  * specific handlers (cxl_map_afu_irq()).
62  *
63  * These IRQs can be unmapped (cxl_unmap_afu_irq()) and finally released
64  * (cxl_free_afu_irqs()).
65  *
66  * The AFU can be reset (cxl_afu_reset()). This will cause the PSL/AFU
67  * hardware to lose track of all contexts. It's upto the caller of
68  * cxl_afu_reset() to restart these contexts.
69  */
70
71 /*
72  * On pci_enabled_device(), the cxl driver will init a single cxl context for
73  * use by the driver. It doesn't start this context (as that will likely
74  * generate DMA traffic for most AFUs).
75  *
76  * This gets the default context associated with this pci_dev.  This context
77  * doesn't need to be released as this will be done by the PCI subsystem on hot
78  * unplug.
79  */
80 struct cxl_context *cxl_get_context(struct pci_dev *dev);
81 /*
82  * Allocate and initalise a context associated with a AFU PCI device. This
83  * doesn't start the context in the AFU.
84  */
85 struct cxl_context *cxl_dev_context_init(struct pci_dev *dev);
86 /*
87  * Release and free a context. Context should be stopped before calling.
88  */
89 int cxl_release_context(struct cxl_context *ctx);
90
91 /*
92  * Allocate AFU interrupts for this context. num=0 will allocate the default
93  * for this AFU as given in the AFU descriptor. This number doesn't include the
94  * interrupt 0 (CAIA defines AFU IRQ 0 for page faults). Each interrupt to be
95  * used must map a handler with cxl_map_afu_irq.
96  */
97 int cxl_allocate_afu_irqs(struct cxl_context *cxl, int num);
98 /* Free allocated interrupts */
99 void cxl_free_afu_irqs(struct cxl_context *cxl);
100
101 /*
102  * Map a handler for an AFU interrupt associated with a particular context. AFU
103  * IRQS numbers start from 1 (CAIA defines AFU IRQ 0 for page faults). cookie
104  * is private data is that will be provided to the interrupt handler.
105  */
106 int cxl_map_afu_irq(struct cxl_context *cxl, int num,
107                     irq_handler_t handler, void *cookie, char *name);
108 /* unmap mapped IRQ handlers */
109 void cxl_unmap_afu_irq(struct cxl_context *cxl, int num, void *cookie);
110
111 /*
112  * Start work on the AFU. This starts an cxl context and associates it with a
113  * task. task == NULL will make it a kernel context.
114  */
115 int cxl_start_context(struct cxl_context *ctx, u64 wed,
116                       struct task_struct *task);
117 /*
118  * Stop a context and remove it from the PSL
119  */
120 int cxl_stop_context(struct cxl_context *ctx);
121
122 /* Reset the AFU */
123 int cxl_afu_reset(struct cxl_context *ctx);
124
125 /*
126  * Set a context as a master context.
127  * This sets the default problem space area mapped as the full space, rather
128  * than just the per context area (for slaves).
129  */
130 void cxl_set_master(struct cxl_context *ctx);
131
132 /*
133  * Map and unmap the AFU Problem Space area. The amount and location mapped
134  * depends on if this context is a master or slave.
135  */
136 void __iomem *cxl_psa_map(struct cxl_context *ctx);
137 void cxl_psa_unmap(void __iomem *addr);
138
139 /*  Get the process element for this context */
140 int cxl_process_element(struct cxl_context *ctx);
141
142
143 /*
144  * These calls allow drivers to create their own file descriptors and make them
145  * identical to the cxl file descriptor user API. An example use case:
146  *
147  * struct file_operations cxl_my_fops = {};
148  * ......
149  *      // Init the context
150  *      ctx = cxl_dev_context_init(dev);
151  *      if (IS_ERR(ctx))
152  *              return PTR_ERR(ctx);
153  *      // Create and attach a new file descriptor to my file ops
154  *      file = cxl_get_fd(ctx, &cxl_my_fops, &fd);
155  *      // Start context
156  *      rc = cxl_start_work(ctx, &work.work);
157  *      if (rc) {
158  *              fput(file);
159  *              put_unused_fd(fd);
160  *              return -ENODEV;
161  *      }
162  *      // No error paths after installing the fd
163  *      fd_install(fd, file);
164  *      return fd;
165  *
166  * This inits a context, and gets a file descriptor and associates some file
167  * ops to that file descriptor. If the file ops are blank, the cxl driver will
168  * fill them in with the default ones that mimic the standard user API.  Once
169  * completed, the file descriptor can be installed. Once the file descriptor is
170  * installed, it's visible to the user so no errors must occur past this point.
171  *
172  * If cxl_fd_release() file op call is installed, the context will be stopped
173  * and released when the fd is released. Hence the driver won't need to manage
174  * this itself.
175  */
176
177 /*
178  * Take a context and associate it with my file ops. Returns the associated
179  * file and file descriptor. Any file ops which are blank are filled in by the
180  * cxl driver with the default ops to mimic the standard API.
181  */
182 struct file *cxl_get_fd(struct cxl_context *ctx, struct file_operations *fops,
183                         int *fd);
184 /* Get the context associated with this file */
185 struct cxl_context *cxl_fops_get_context(struct file *file);
186 /*
187  * Start a context associated a struct cxl_ioctl_start_work used by the
188  * standard cxl user API.
189  */
190 int cxl_start_work(struct cxl_context *ctx,
191                    struct cxl_ioctl_start_work *work);
192 /*
193  * Export all the existing fops so drivers can use them
194  */
195 int cxl_fd_open(struct inode *inode, struct file *file);
196 int cxl_fd_release(struct inode *inode, struct file *file);
197 long cxl_fd_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
198 int cxl_fd_mmap(struct file *file, struct vm_area_struct *vm);
199 unsigned int cxl_fd_poll(struct file *file, struct poll_table_struct *poll);
200 ssize_t cxl_fd_read(struct file *file, char __user *buf, size_t count,
201                            loff_t *off);
202
203 /*
204  * For EEH, a driver may want to assert a PERST will reload the same image
205  * from flash into the FPGA.
206  *
207  * This is a property of the entire adapter, not a single AFU, so drivers
208  * should set this property with care!
209  */
210 void cxl_perst_reloads_same_image(struct cxl_afu *afu,
211                                   bool perst_reloads_same_image);
212
213 #endif /* _MISC_CXL_H */