drivers/usb/phy/phy-twl6030-usb.c

   1 /*
   2  * twl6030_usb - TWL6030 USB transceiver, talking to OMAP OTG driver.
   3  *
   4  * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com
   5  * This program is free software; you can redistribute it and/or modify
   6  * it under the terms of the GNU General Public License as published by
   7  * the Free Software Foundation; either version 2 of the License, or
   8  * (at your option) any later version.
   9  *
  10  * Author: Hema HK <hemahk@ti.com>
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  20  *
  21  */
  22
  23 #include <linux/module.h>
  24 #include <linux/init.h>
  25 #include <linux/interrupt.h>
  26 #include <linux/platform_device.h>
  27 #include <linux/io.h>
  28 #include <linux/usb/musb-omap.h>
  29 #include <linux/usb/phy_companion.h>
  30 #include <linux/phy/omap_usb.h>
  31 #include <linux/i2c/twl.h>
  32 #include <linux/regulator/consumer.h>
  33 #include <linux/err.h>
  34 #include <linux/slab.h>
  35 #include <linux/delay.h>
  36 #include <linux/of.h>
  37
  38 /* usb register definitions */
  39 #define USB_VENDOR_ID_LSB               0x00
  40 #define USB_VENDOR_ID_MSB               0x01
  41 #define USB_PRODUCT_ID_LSB              0x02
  42 #define USB_PRODUCT_ID_MSB              0x03
  43 #define USB_VBUS_CTRL_SET               0x04
  44 #define USB_VBUS_CTRL_CLR               0x05
  45 #define USB_ID_CTRL_SET                 0x06
  46 #define USB_ID_CTRL_CLR                 0x07
  47 #define USB_VBUS_INT_SRC                0x08
  48 #define USB_VBUS_INT_LATCH_SET          0x09
  49 #define USB_VBUS_INT_LATCH_CLR          0x0A
  50 #define USB_VBUS_INT_EN_LO_SET          0x0B
  51 #define USB_VBUS_INT_EN_LO_CLR          0x0C
  52 #define USB_VBUS_INT_EN_HI_SET          0x0D
  53 #define USB_VBUS_INT_EN_HI_CLR          0x0E
  54 #define USB_ID_INT_SRC                  0x0F
  55 #define USB_ID_INT_LATCH_SET            0x10
  56 #define USB_ID_INT_LATCH_CLR            0x11
  57
  58 #define USB_ID_INT_EN_LO_SET            0x12
  59 #define USB_ID_INT_EN_LO_CLR            0x13
  60 #define USB_ID_INT_EN_HI_SET            0x14
  61 #define USB_ID_INT_EN_HI_CLR            0x15
  62 #define USB_OTG_ADP_CTRL                0x16
  63 #define USB_OTG_ADP_HIGH                0x17
  64 #define USB_OTG_ADP_LOW                 0x18
  65 #define USB_OTG_ADP_RISE                0x19
  66 #define USB_OTG_REVISION                0x1A
  67
  68 /* to be moved to LDO */
  69 #define TWL6030_MISC2                   0xE5
  70 #define TWL6030_CFG_LDO_PD2             0xF5
  71 #define TWL6030_BACKUP_REG              0xFA
  72
  73 #define STS_HW_CONDITIONS               0x21
  74
  75 /* In module TWL6030_MODULE_PM_MASTER */
  76 #define STS_HW_CONDITIONS               0x21
  77 #define STS_USB_ID                      BIT(2)
  78
  79 /* In module TWL6030_MODULE_PM_RECEIVER */
  80 #define VUSB_CFG_TRANS                  0x71
  81 #define VUSB_CFG_STATE                  0x72
  82 #define VUSB_CFG_VOLTAGE                0x73
  83
  84 /* in module TWL6030_MODULE_MAIN_CHARGE */
  85
  86 #define CHARGERUSB_CTRL1                0x8
  87
  88 #define CONTROLLER_STAT1                0x03
  89 #define VBUS_DET                        BIT(2)
  90
  91 struct twl6030_usb {
  92         struct phy_companion    comparator;
  93         struct device           *dev;
  94
  95         /* for vbus reporting with irqs disabled */
  96         spinlock_t              lock;
  97
  98         struct regulator                *usb3v3;
  99
 100         /* used to set vbus, in atomic path */
 101         struct work_struct      set_vbus_work;
 102
 103         int                     irq1;
 104         int                     irq2;
 105         enum omap_musb_vbus_id_status linkstat;
 106         u8                      asleep;
 107         bool                    vbus_enable;
 108         const char              *regulator;
 109 };
 110
 111 #define comparator_to_twl(x) container_of((x), struct twl6030_usb, comparator)
 112
 113 /*-------------------------------------------------------------------------*/
 114
 115 static inline int twl6030_writeb(struct twl6030_usb *twl, u8 module,
 116                                                 u8 data, u8 address)
 117 {
 118         int ret = 0;
 119
 120         ret = twl_i2c_write_u8(module, data, address);
 121         if (ret < 0)
 122                 dev_err(twl->dev,
 123                         "Write[0x%x] Error %d\n", address, ret);
 124         return ret;
 125 }
 126
 127 static inline u8 twl6030_readb(struct twl6030_usb *twl, u8 module, u8 address)
 128 {
 129         u8 data;
 130         int ret;
 131
 132         ret = twl_i2c_read_u8(module, &data, address);
 133         if (ret >= 0)
 134                 ret = data;
 135         else
 136                 dev_err(twl->dev,
 137                         "readb[0x%x,0x%x] Error %d\n",
 138                                         module, address, ret);
 139         return ret;
 140 }
 141
 142 static int twl6030_start_srp(struct phy_companion *comparator)
 143 {
 144         struct twl6030_usb *twl = comparator_to_twl(comparator);
 145
 146         twl6030_writeb(twl, TWL_MODULE_USB, 0x24, USB_VBUS_CTRL_SET);
 147         twl6030_writeb(twl, TWL_MODULE_USB, 0x84, USB_VBUS_CTRL_SET);
 148
 149         mdelay(100);
 150         twl6030_writeb(twl, TWL_MODULE_USB, 0xa0, USB_VBUS_CTRL_CLR);
 151
 152         return 0;
 153 }
 154
 155 static int twl6030_usb_ldo_init(struct twl6030_usb *twl)
 156 {
 157         /* Set to OTG_REV 1.3 and turn on the ID_WAKEUP_COMP */
 158         twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x1, TWL6030_BACKUP_REG);
 159
 160         /* Program CFG_LDO_PD2 register and set VUSB bit */
 161         twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x1, TWL6030_CFG_LDO_PD2);
 162
 163         /* Program MISC2 register and set bit VUSB_IN_VBAT */
 164         twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x10, TWL6030_MISC2);
 165
 166         twl->usb3v3 = regulator_get(twl->dev, twl->regulator);
 167         if (IS_ERR(twl->usb3v3))
 168                 return -ENODEV;
 169
 170         /* Program the USB_VBUS_CTRL_SET and set VBUS_ACT_COMP bit */
 171         twl6030_writeb(twl, TWL_MODULE_USB, 0x4, USB_VBUS_CTRL_SET);
 172
 173         /*
 174          * Program the USB_ID_CTRL_SET register to enable GND drive
 175          * and the ID comparators
 176          */
 177         twl6030_writeb(twl, TWL_MODULE_USB, 0x14, USB_ID_CTRL_SET);
 178
 179         return 0;
 180 }
 181
 182 static ssize_t twl6030_usb_vbus_show(struct device *dev,
 183                         struct device_attribute *attr, char *buf)
 184 {
 185         struct twl6030_usb *twl = dev_get_drvdata(dev);
 186         unsigned long flags;
 187         int ret = -EINVAL;
 188
 189         spin_lock_irqsave(&twl->lock, flags);
 190
 191         switch (twl->linkstat) {
 192         case OMAP_MUSB_VBUS_VALID:
 193                ret = snprintf(buf, PAGE_SIZE, "vbus\n");
 194                break;
 195         case OMAP_MUSB_ID_GROUND:
 196                ret = snprintf(buf, PAGE_SIZE, "id\n");
 197                break;
 198         case OMAP_MUSB_VBUS_OFF:
 199                ret = snprintf(buf, PAGE_SIZE, "none\n");
 200                break;
 201         default:
 202                ret = snprintf(buf, PAGE_SIZE, "UNKNOWN\n");
 203         }
 204         spin_unlock_irqrestore(&twl->lock, flags);
 205
 206         return ret;
 207 }
 208 static DEVICE_ATTR(vbus, 0444, twl6030_usb_vbus_show, NULL);
 209
 210 static irqreturn_t twl6030_usb_irq(int irq, void *_twl)
 211 {
 212         struct twl6030_usb *twl = _twl;
 213         enum omap_musb_vbus_id_status status = OMAP_MUSB_UNKNOWN;
 214         u8 vbus_state, hw_state;
 215         int ret;
 216
 217         hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS);
 218
 219         vbus_state = twl6030_readb(twl, TWL_MODULE_MAIN_CHARGE,
 220                                                 CONTROLLER_STAT1);
 221         if (!(hw_state & STS_USB_ID)) {
 222                 if (vbus_state & VBUS_DET) {
 223                         ret = regulator_enable(twl->usb3v3);
 224                         if (ret)
 225                                 dev_err(twl->dev, "Failed to enable usb3v3\n");
 226
 227                         twl->asleep = 1;
 228                         status = OMAP_MUSB_VBUS_VALID;
 229                         twl->linkstat = status;
 230                         omap_musb_mailbox(status);
 231                 } else {
 232                         if (twl->linkstat != OMAP_MUSB_UNKNOWN) {
 233                                 status = OMAP_MUSB_VBUS_OFF;
 234                                 twl->linkstat = status;
 235                                 omap_musb_mailbox(status);
 236                                 if (twl->asleep) {
 237                                         regulator_disable(twl->usb3v3);
 238                                         twl->asleep = 0;
 239                                 }
 240                         }
 241                 }
 242         }
 243         sysfs_notify(&twl->dev->kobj, NULL, "vbus");
 244
 245         return IRQ_HANDLED;
 246 }
 247
 248 static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl)
 249 {
 250         struct twl6030_usb *twl = _twl;
 251         enum omap_musb_vbus_id_status status = OMAP_MUSB_UNKNOWN;
 252         u8 hw_state;
 253         int ret;
 254
 255         hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS);
 256
 257         if (hw_state & STS_USB_ID) {
 258                 ret = regulator_enable(twl->usb3v3);
 259                 if (ret)
 260                         dev_err(twl->dev, "Failed to enable usb3v3\n");
 261
 262                 twl->asleep = 1;
 263                 twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_CLR);
 264                 twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_SET);
 265                 status = OMAP_MUSB_ID_GROUND;
 266                 twl->linkstat = status;
 267                 omap_musb_mailbox(status);
 268         } else  {
 269                 twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_CLR);
 270                 twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET);
 271         }
 272         twl6030_writeb(twl, TWL_MODULE_USB, status, USB_ID_INT_LATCH_CLR);
 273
 274         return IRQ_HANDLED;
 275 }
 276
 277 static int twl6030_enable_irq(struct twl6030_usb *twl)
 278 {
 279         twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET);
 280         twl6030_interrupt_unmask(0x05, REG_INT_MSK_LINE_C);
 281         twl6030_interrupt_unmask(0x05, REG_INT_MSK_STS_C);
 282
 283         twl6030_interrupt_unmask(TWL6030_CHARGER_CTRL_INT_MASK,
 284                                 REG_INT_MSK_LINE_C);
 285         twl6030_interrupt_unmask(TWL6030_CHARGER_CTRL_INT_MASK,
 286                                 REG_INT_MSK_STS_C);
 287         twl6030_usb_irq(twl->irq2, twl);
 288         twl6030_usbotg_irq(twl->irq1, twl);
 289
 290         return 0;
 291 }
 292
 293 static void otg_set_vbus_work(struct work_struct *data)
 294 {
 295         struct twl6030_usb *twl = container_of(data, struct twl6030_usb,
 296                                                                 set_vbus_work);
 297
 298         /*
 299          * Start driving VBUS. Set OPA_MODE bit in CHARGERUSB_CTRL1
 300          * register. This enables boost mode.
 301          */
 302
 303         if (twl->vbus_enable)
 304                 twl6030_writeb(twl, TWL_MODULE_MAIN_CHARGE , 0x40,
 305                                                         CHARGERUSB_CTRL1);
 306         else
 307                 twl6030_writeb(twl, TWL_MODULE_MAIN_CHARGE , 0x00,
 308                                                         CHARGERUSB_CTRL1);
 309 }
 310
 311 static int twl6030_set_vbus(struct phy_companion *comparator, bool enabled)
 312 {
 313         struct twl6030_usb *twl = comparator_to_twl(comparator);
 314
 315         twl->vbus_enable = enabled;
 316         schedule_work(&twl->set_vbus_work);
 317
 318         return 0;
 319 }
 320
 321 static int twl6030_usb_probe(struct platform_device *pdev)
 322 {
 323         u32 ret;
 324         struct twl6030_usb      *twl;
 325         int                     status, err;
 326         struct device_node      *np = pdev->dev.of_node;
 327         struct device           *dev = &pdev->dev;
 328         struct twl4030_usb_data *pdata = dev_get_platdata(dev);
 329
 330         twl = devm_kzalloc(dev, sizeof(*twl), GFP_KERNEL);
 331         if (!twl)
 332                 return -ENOMEM;
 333
 334         twl->dev                = &pdev->dev;
 335         twl->irq1               = platform_get_irq(pdev, 0);
 336         twl->irq2               = platform_get_irq(pdev, 1);
 337         twl->linkstat           = OMAP_MUSB_UNKNOWN;
 338
 339         twl->comparator.set_vbus        = twl6030_set_vbus;
 340         twl->comparator.start_srp       = twl6030_start_srp;
 341
 342         ret = omap_usb2_set_comparator(&twl->comparator);
 343         if (ret == -ENODEV) {
 344                 dev_info(&pdev->dev, "phy not ready, deferring probe");
 345                 return -EPROBE_DEFER;
 346         }
 347
 348         if (np) {
 349                 twl->regulator = "usb";
 350         } else if (pdata) {
 351                 if (pdata->features & TWL6032_SUBCLASS)
 352                         twl->regulator = "ldousb";
 353                 else
 354                         twl->regulator = "vusb";
 355         } else {
 356                 dev_err(&pdev->dev, "twl6030 initialized without pdata\n");
 357                 return -EINVAL;
 358         }
 359
 360         /* init spinlock for workqueue */
 361         spin_lock_init(&twl->lock);
 362
 363         err = twl6030_usb_ldo_init(twl);
 364         if (err) {
 365                 dev_err(&pdev->dev, "ldo init failed\n");
 366                 return err;
 367         }
 368
 369         platform_set_drvdata(pdev, twl);
 370         if (device_create_file(&pdev->dev, &dev_attr_vbus))
 371                 dev_warn(&pdev->dev, "could not create sysfs file\n");
 372
 373         INIT_WORK(&twl->set_vbus_work, otg_set_vbus_work);
 374
 375         status = request_threaded_irq(twl->irq1, NULL, twl6030_usbotg_irq,
 376                         IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING | IRQF_ONESHOT,
 377                         "twl6030_usb", twl);
 378         if (status < 0) {
 379                 dev_err(&pdev->dev, "can't get IRQ %d, err %d\n",
 380                         twl->irq1, status);
 381                 device_remove_file(twl->dev, &dev_attr_vbus);
 382                 return status;
 383         }
 384
 385         status = request_threaded_irq(twl->irq2, NULL, twl6030_usb_irq,
 386                         IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING | IRQF_ONESHOT,
 387                         "twl6030_usb", twl);
 388         if (status < 0) {
 389                 dev_err(&pdev->dev, "can't get IRQ %d, err %d\n",
 390                         twl->irq2, status);
 391                 free_irq(twl->irq1, twl);
 392                 device_remove_file(twl->dev, &dev_attr_vbus);
 393                 return status;
 394         }
 395
 396         twl->asleep = 0;
 397         twl6030_enable_irq(twl);
 398         dev_info(&pdev->dev, "Initialized TWL6030 USB module\n");
 399
 400         return 0;
 401 }
 402
 403 static int twl6030_usb_remove(struct platform_device *pdev)
 404 {
 405         struct twl6030_usb *twl = platform_get_drvdata(pdev);
 406
 407         twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK,
 408                 REG_INT_MSK_LINE_C);
 409         twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK,
 410                         REG_INT_MSK_STS_C);
 411         free_irq(twl->irq1, twl);
 412         free_irq(twl->irq2, twl);
 413         regulator_put(twl->usb3v3);
 414         device_remove_file(twl->dev, &dev_attr_vbus);
 415         cancel_work_sync(&twl->set_vbus_work);
 416
 417         return 0;
 418 }
 419
 420 #ifdef CONFIG_OF
 421 static const struct of_device_id twl6030_usb_id_table[] = {
 422         { .compatible = "ti,twl6030-usb" },
 423         {}
 424 };
 425 MODULE_DEVICE_TABLE(of, twl6030_usb_id_table);
 426 #endif
 427
 428 static struct platform_driver twl6030_usb_driver = {
 429         .probe          = twl6030_usb_probe,
 430         .remove         = twl6030_usb_remove,
 431         .driver         = {
 432                 .name   = "twl6030_usb",
 433                 .of_match_table = of_match_ptr(twl6030_usb_id_table),
 434         },
 435 };
 436
 437 static int __init twl6030_usb_init(void)
 438 {
 439         return platform_driver_register(&twl6030_usb_driver);
 440 }
 441 subsys_initcall(twl6030_usb_init);
 442
 443 static void __exit twl6030_usb_exit(void)
 444 {
 445         platform_driver_unregister(&twl6030_usb_driver);
 446 }
 447 module_exit(twl6030_usb_exit);
 448
 449 MODULE_ALIAS("platform:twl6030_usb");
 450 MODULE_AUTHOR("Hema HK <hemahk@ti.com>");
 451 MODULE_DESCRIPTION("TWL6030 USB transceiver driver");
 452 MODULE_LICENSE("GPL");