drivers/usb/phy/phy-fsl-usb.c

   1 /*
   2  * Copyright (C) 2007,2008 Freescale semiconductor, Inc.
   3  *
   4  * Author: Li Yang <LeoLi@freescale.com>
   5  *         Jerry Huang <Chang-Ming.Huang@freescale.com>
   6  *
   7  * Initialization based on code from Shlomi Gridish.
   8  *
   9  * This program is free software; you can redistribute  it and/or modify it
  10  * under  the terms of  the GNU General  Public License as published by the
  11  * Free Software Foundation;  either version 2 of the  License, or (at your
  12  * option) any later version.
  13  *
  14  * This program is distributed in the hope that it will be useful, but
  15  * WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  17  * General Public License for more details.
  18  *
  19  * You should have received a copy of the  GNU General Public License along
  20  * with this program; if not, write  to the Free Software Foundation, Inc.,
  21  * 675 Mass Ave, Cambridge, MA 02139, USA.
  22  */
  23
  24 #include <linux/module.h>
  25 #include <linux/kernel.h>
  26 #include <linux/delay.h>
  27 #include <linux/slab.h>
  28 #include <linux/proc_fs.h>
  29 #include <linux/errno.h>
  30 #include <linux/interrupt.h>
  31 #include <linux/io.h>
  32 #include <linux/timer.h>
  33 #include <linux/usb.h>
  34 #include <linux/device.h>
  35 #include <linux/usb/ch9.h>
  36 #include <linux/usb/gadget.h>
  37 #include <linux/workqueue.h>
  38 #include <linux/time.h>
  39 #include <linux/fsl_devices.h>
  40 #include <linux/platform_device.h>
  41 #include <linux/uaccess.h>
  42
  43 #include <asm/unaligned.h>
  44
  45 #include "phy-fsl-usb.h"
  46
  47 #define DRIVER_VERSION "Rev. 1.55"
  48 #define DRIVER_AUTHOR "Jerry Huang/Li Yang"
  49 #define DRIVER_DESC "Freescale USB OTG Transceiver Driver"
  50 #define DRIVER_INFO DRIVER_DESC " " DRIVER_VERSION
  51
  52 static const char driver_name[] = "fsl-usb2-otg";
  53
  54 const pm_message_t otg_suspend_state = {
  55         .event = 1,
  56 };
  57
  58 #define HA_DATA_PULSE
  59
  60 static struct usb_dr_mmap *usb_dr_regs;
  61 static struct fsl_otg *fsl_otg_dev;
  62 static int srp_wait_done;
  63
  64 /* FSM timers */
  65 struct fsl_otg_timer *a_wait_vrise_tmr, *a_wait_bcon_tmr, *a_aidl_bdis_tmr,
  66         *b_ase0_brst_tmr, *b_se0_srp_tmr;
  67
  68 /* Driver specific timers */
  69 struct fsl_otg_timer *b_data_pulse_tmr, *b_vbus_pulse_tmr, *b_srp_fail_tmr,
  70         *b_srp_wait_tmr, *a_wait_enum_tmr;
  71
  72 static struct list_head active_timers;
  73
  74 static struct fsl_otg_config fsl_otg_initdata = {
  75         .otg_port = 1,
  76 };
  77
  78 #ifdef CONFIG_PPC32
  79 static u32 _fsl_readl_be(const unsigned __iomem *p)
  80 {
  81         return in_be32(p);
  82 }
  83
  84 static u32 _fsl_readl_le(const unsigned __iomem *p)
  85 {
  86         return in_le32(p);
  87 }
  88
  89 static void _fsl_writel_be(u32 v, unsigned __iomem *p)
  90 {
  91         out_be32(p, v);
  92 }
  93
  94 static void _fsl_writel_le(u32 v, unsigned __iomem *p)
  95 {
  96         out_le32(p, v);
  97 }
  98
  99 static u32 (*_fsl_readl)(const unsigned __iomem *p);
 100 static void (*_fsl_writel)(u32 v, unsigned __iomem *p);
 101
 102 #define fsl_readl(p)            (*_fsl_readl)((p))
 103 #define fsl_writel(v, p)        (*_fsl_writel)((v), (p))
 104
 105 #else
 106 #define fsl_readl(addr)         readl(addr)
 107 #define fsl_writel(val, addr)   writel(val, addr)
 108 #endif /* CONFIG_PPC32 */
 109
 110 int write_ulpi(u8 addr, u8 data)
 111 {
 112         u32 temp;
 113
 114         temp = 0x60000000 | (addr << 16) | data;
 115         fsl_writel(temp, &usb_dr_regs->ulpiview);
 116         return 0;
 117 }
 118
 119 /* -------------------------------------------------------------*/
 120 /* Operations that will be called from OTG Finite State Machine */
 121
 122 /* Charge vbus for vbus pulsing in SRP */
 123 void fsl_otg_chrg_vbus(struct otg_fsm *fsm, int on)
 124 {
 125         u32 tmp;
 126
 127         tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK;
 128
 129         if (on)
 130                 /* stop discharging, start charging */
 131                 tmp = (tmp & ~OTGSC_CTRL_VBUS_DISCHARGE) |
 132                         OTGSC_CTRL_VBUS_CHARGE;
 133         else
 134                 /* stop charging */
 135                 tmp &= ~OTGSC_CTRL_VBUS_CHARGE;
 136
 137         fsl_writel(tmp, &usb_dr_regs->otgsc);
 138 }
 139
 140 /* Discharge vbus through a resistor to ground */
 141 void fsl_otg_dischrg_vbus(int on)
 142 {
 143         u32 tmp;
 144
 145         tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK;
 146
 147         if (on)
 148                 /* stop charging, start discharging */
 149                 tmp = (tmp & ~OTGSC_CTRL_VBUS_CHARGE) |
 150                         OTGSC_CTRL_VBUS_DISCHARGE;
 151         else
 152                 /* stop discharging */
 153                 tmp &= ~OTGSC_CTRL_VBUS_DISCHARGE;
 154
 155         fsl_writel(tmp, &usb_dr_regs->otgsc);
 156 }
 157
 158 /* A-device driver vbus, controlled through PP bit in PORTSC */
 159 void fsl_otg_drv_vbus(struct otg_fsm *fsm, int on)
 160 {
 161         u32 tmp;
 162
 163         if (on) {
 164                 tmp = fsl_readl(&usb_dr_regs->portsc) & ~PORTSC_W1C_BITS;
 165                 fsl_writel(tmp | PORTSC_PORT_POWER, &usb_dr_regs->portsc);
 166         } else {
 167                 tmp = fsl_readl(&usb_dr_regs->portsc) &
 168                       ~PORTSC_W1C_BITS & ~PORTSC_PORT_POWER;
 169                 fsl_writel(tmp, &usb_dr_regs->portsc);
 170         }
 171 }
 172
 173 /*
 174  * Pull-up D+, signalling connect by periperal. Also used in
 175  * data-line pulsing in SRP
 176  */
 177 void fsl_otg_loc_conn(struct otg_fsm *fsm, int on)
 178 {
 179         u32 tmp;
 180
 181         tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK;
 182
 183         if (on)
 184                 tmp |= OTGSC_CTRL_DATA_PULSING;
 185         else
 186                 tmp &= ~OTGSC_CTRL_DATA_PULSING;
 187
 188         fsl_writel(tmp, &usb_dr_regs->otgsc);
 189 }
 190
 191 /*
 192  * Generate SOF by host.  This is controlled through suspend/resume the
 193  * port.  In host mode, controller will automatically send SOF.
 194  * Suspend will block the data on the port.
 195  */
 196 void fsl_otg_loc_sof(struct otg_fsm *fsm, int on)
 197 {
 198         u32 tmp;
 199
 200         tmp = fsl_readl(&fsl_otg_dev->dr_mem_map->portsc) & ~PORTSC_W1C_BITS;
 201         if (on)
 202                 tmp |= PORTSC_PORT_FORCE_RESUME;
 203         else
 204                 tmp |= PORTSC_PORT_SUSPEND;
 205
 206         fsl_writel(tmp, &fsl_otg_dev->dr_mem_map->portsc);
 207
 208 }
 209
 210 /* Start SRP pulsing by data-line pulsing, followed with v-bus pulsing. */
 211 void fsl_otg_start_pulse(struct otg_fsm *fsm)
 212 {
 213         u32 tmp;
 214
 215         srp_wait_done = 0;
 216 #ifdef HA_DATA_PULSE
 217         tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK;
 218         tmp |= OTGSC_HA_DATA_PULSE;
 219         fsl_writel(tmp, &usb_dr_regs->otgsc);
 220 #else
 221         fsl_otg_loc_conn(1);
 222 #endif
 223
 224         fsl_otg_add_timer(fsm, b_data_pulse_tmr);
 225 }
 226
 227 void b_data_pulse_end(unsigned long foo)
 228 {
 229 #ifdef HA_DATA_PULSE
 230 #else
 231         fsl_otg_loc_conn(0);
 232 #endif
 233
 234         /* Do VBUS pulse after data pulse */
 235         fsl_otg_pulse_vbus();
 236 }
 237
 238 void fsl_otg_pulse_vbus(void)
 239 {
 240         srp_wait_done = 0;
 241         fsl_otg_chrg_vbus(&fsl_otg_dev->fsm, 1);
 242         /* start the timer to end vbus charge */
 243         fsl_otg_add_timer(&fsl_otg_dev->fsm, b_vbus_pulse_tmr);
 244 }
 245
 246 void b_vbus_pulse_end(unsigned long foo)
 247 {
 248         fsl_otg_chrg_vbus(&fsl_otg_dev->fsm, 0);
 249
 250         /*
 251          * As USB3300 using the same a_sess_vld and b_sess_vld voltage
 252          * we need to discharge the bus for a while to distinguish
 253          * residual voltage of vbus pulsing and A device pull up
 254          */
 255         fsl_otg_dischrg_vbus(1);
 256         fsl_otg_add_timer(&fsl_otg_dev->fsm, b_srp_wait_tmr);
 257 }
 258
 259 void b_srp_end(unsigned long foo)
 260 {
 261         fsl_otg_dischrg_vbus(0);
 262         srp_wait_done = 1;
 263
 264         if ((fsl_otg_dev->phy.otg->state == OTG_STATE_B_SRP_INIT) &&
 265             fsl_otg_dev->fsm.b_sess_vld)
 266                 fsl_otg_dev->fsm.b_srp_done = 1;
 267 }
 268
 269 /*
 270  * Workaround for a_host suspending too fast.  When a_bus_req=0,
 271  * a_host will start by SRP.  It needs to set b_hnp_enable before
 272  * actually suspending to start HNP
 273  */
 274 void a_wait_enum(unsigned long foo)
 275 {
 276         VDBG("a_wait_enum timeout\n");
 277         if (!fsl_otg_dev->phy.otg->host->b_hnp_enable)
 278                 fsl_otg_add_timer(&fsl_otg_dev->fsm, a_wait_enum_tmr);
 279         else
 280                 otg_statemachine(&fsl_otg_dev->fsm);
 281 }
 282
 283 /* The timeout callback function to set time out bit */
 284 void set_tmout(unsigned long indicator)
 285 {
 286         *(int *)indicator = 1;
 287 }
 288
 289 /* Initialize timers */
 290 int fsl_otg_init_timers(struct otg_fsm *fsm)
 291 {
 292         /* FSM used timers */
 293         a_wait_vrise_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_VRISE,
 294                                 (unsigned long)&fsm->a_wait_vrise_tmout);
 295         if (!a_wait_vrise_tmr)
 296                 return -ENOMEM;
 297
 298         a_wait_bcon_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_BCON,
 299                                 (unsigned long)&fsm->a_wait_bcon_tmout);
 300         if (!a_wait_bcon_tmr)
 301                 return -ENOMEM;
 302
 303         a_aidl_bdis_tmr = otg_timer_initializer(&set_tmout, TA_AIDL_BDIS,
 304                                 (unsigned long)&fsm->a_aidl_bdis_tmout);
 305         if (!a_aidl_bdis_tmr)
 306                 return -ENOMEM;
 307
 308         b_ase0_brst_tmr = otg_timer_initializer(&set_tmout, TB_ASE0_BRST,
 309                                 (unsigned long)&fsm->b_ase0_brst_tmout);
 310         if (!b_ase0_brst_tmr)
 311                 return -ENOMEM;
 312
 313         b_se0_srp_tmr = otg_timer_initializer(&set_tmout, TB_SE0_SRP,
 314                                 (unsigned long)&fsm->b_se0_srp);
 315         if (!b_se0_srp_tmr)
 316                 return -ENOMEM;
 317
 318         b_srp_fail_tmr = otg_timer_initializer(&set_tmout, TB_SRP_FAIL,
 319                                 (unsigned long)&fsm->b_srp_done);
 320         if (!b_srp_fail_tmr)
 321                 return -ENOMEM;
 322
 323         a_wait_enum_tmr = otg_timer_initializer(&a_wait_enum, 10,
 324                                 (unsigned long)&fsm);
 325         if (!a_wait_enum_tmr)
 326                 return -ENOMEM;
 327
 328         /* device driver used timers */
 329         b_srp_wait_tmr = otg_timer_initializer(&b_srp_end, TB_SRP_WAIT, 0);
 330         if (!b_srp_wait_tmr)
 331                 return -ENOMEM;
 332
 333         b_data_pulse_tmr = otg_timer_initializer(&b_data_pulse_end,
 334                                 TB_DATA_PLS, 0);
 335         if (!b_data_pulse_tmr)
 336                 return -ENOMEM;
 337
 338         b_vbus_pulse_tmr = otg_timer_initializer(&b_vbus_pulse_end,
 339                                 TB_VBUS_PLS, 0);
 340         if (!b_vbus_pulse_tmr)
 341                 return -ENOMEM;
 342
 343         return 0;
 344 }
 345
 346 /* Uninitialize timers */
 347 void fsl_otg_uninit_timers(void)
 348 {
 349         /* FSM used timers */
 350         kfree(a_wait_vrise_tmr);
 351         kfree(a_wait_bcon_tmr);
 352         kfree(a_aidl_bdis_tmr);
 353         kfree(b_ase0_brst_tmr);
 354         kfree(b_se0_srp_tmr);
 355         kfree(b_srp_fail_tmr);
 356         kfree(a_wait_enum_tmr);
 357
 358         /* device driver used timers */
 359         kfree(b_srp_wait_tmr);
 360         kfree(b_data_pulse_tmr);
 361         kfree(b_vbus_pulse_tmr);
 362 }
 363
 364 static struct fsl_otg_timer *fsl_otg_get_timer(enum otg_fsm_timer t)
 365 {
 366         struct fsl_otg_timer *timer;
 367
 368         /* REVISIT: use array of pointers to timers instead */
 369         switch (t) {
 370         case A_WAIT_VRISE:
 371                 timer = a_wait_vrise_tmr;
 372                 break;
 373         case A_WAIT_BCON:
 374                 timer = a_wait_vrise_tmr;
 375                 break;
 376         case A_AIDL_BDIS:
 377                 timer = a_wait_vrise_tmr;
 378                 break;
 379         case B_ASE0_BRST:
 380                 timer = a_wait_vrise_tmr;
 381                 break;
 382         case B_SE0_SRP:
 383                 timer = a_wait_vrise_tmr;
 384                 break;
 385         case B_SRP_FAIL:
 386                 timer = a_wait_vrise_tmr;
 387                 break;
 388         case A_WAIT_ENUM:
 389                 timer = a_wait_vrise_tmr;
 390                 break;
 391         default:
 392                 timer = NULL;
 393         }
 394
 395         return timer;
 396 }
 397
 398 /* Add timer to timer list */
 399 void fsl_otg_add_timer(struct otg_fsm *fsm, void *gtimer)
 400 {
 401         struct fsl_otg_timer *timer = gtimer;
 402         struct fsl_otg_timer *tmp_timer;
 403
 404         /*
 405          * Check if the timer is already in the active list,
 406          * if so update timer count
 407          */
 408         list_for_each_entry(tmp_timer, &active_timers, list)
 409             if (tmp_timer == timer) {
 410                 timer->count = timer->expires;
 411                 return;
 412         }
 413         timer->count = timer->expires;
 414         list_add_tail(&timer->list, &active_timers);
 415 }
 416
 417 static void fsl_otg_fsm_add_timer(struct otg_fsm *fsm, enum otg_fsm_timer t)
 418 {
 419         struct fsl_otg_timer *timer;
 420
 421         timer = fsl_otg_get_timer(t);
 422         if (!timer)
 423                 return;
 424
 425         fsl_otg_add_timer(fsm, timer);
 426 }
 427
 428 /* Remove timer from the timer list; clear timeout status */
 429 void fsl_otg_del_timer(struct otg_fsm *fsm, void *gtimer)
 430 {
 431         struct fsl_otg_timer *timer = gtimer;
 432         struct fsl_otg_timer *tmp_timer, *del_tmp;
 433
 434         list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list)
 435                 if (tmp_timer == timer)
 436                         list_del(&timer->list);
 437 }
 438
 439 static void fsl_otg_fsm_del_timer(struct otg_fsm *fsm, enum otg_fsm_timer t)
 440 {
 441         struct fsl_otg_timer *timer;
 442
 443         timer = fsl_otg_get_timer(t);
 444         if (!timer)
 445                 return;
 446
 447         fsl_otg_del_timer(fsm, timer);
 448 }
 449
 450 /* Reset controller, not reset the bus */
 451 void otg_reset_controller(void)
 452 {
 453         u32 command;
 454
 455         command = fsl_readl(&usb_dr_regs->usbcmd);
 456         command |= (1 << 1);
 457         fsl_writel(command, &usb_dr_regs->usbcmd);
 458         while (fsl_readl(&usb_dr_regs->usbcmd) & (1 << 1))
 459                 ;
 460 }
 461
 462 /* Call suspend/resume routines in host driver */
 463 int fsl_otg_start_host(struct otg_fsm *fsm, int on)
 464 {
 465         struct usb_otg *otg = fsm->otg;
 466         struct device *dev;
 467         struct fsl_otg *otg_dev =
 468                 container_of(otg->usb_phy, struct fsl_otg, phy);
 469         u32 retval = 0;
 470
 471         if (!otg->host)
 472                 return -ENODEV;
 473         dev = otg->host->controller;
 474
 475         /*
 476          * Update a_vbus_vld state as a_vbus_vld int is disabled
 477          * in device mode
 478          */
 479         fsm->a_vbus_vld =
 480                 !!(fsl_readl(&usb_dr_regs->otgsc) & OTGSC_STS_A_VBUS_VALID);
 481         if (on) {
 482                 /* start fsl usb host controller */
 483                 if (otg_dev->host_working)
 484                         goto end;
 485                 else {
 486                         otg_reset_controller();
 487                         VDBG("host on......\n");
 488                         if (dev->driver->pm && dev->driver->pm->resume) {
 489                                 retval = dev->driver->pm->resume(dev);
 490                                 if (fsm->id) {
 491                                         /* default-b */
 492                                         fsl_otg_drv_vbus(fsm, 1);
 493                                         /*
 494                                          * Workaround: b_host can't driver
 495                                          * vbus, but PP in PORTSC needs to
 496                                          * be 1 for host to work.
 497                                          * So we set drv_vbus bit in
 498                                          * transceiver to 0 thru ULPI.
 499                                          */
 500                                         write_ulpi(0x0c, 0x20);
 501                                 }
 502                         }
 503
 504                         otg_dev->host_working = 1;
 505                 }
 506         } else {
 507                 /* stop fsl usb host controller */
 508                 if (!otg_dev->host_working)
 509                         goto end;
 510                 else {
 511                         VDBG("host off......\n");
 512                         if (dev && dev->driver) {
 513                                 if (dev->driver->pm && dev->driver->pm->suspend)
 514                                         retval = dev->driver->pm->suspend(dev);
 515                                 if (fsm->id)
 516                                         /* default-b */
 517                                         fsl_otg_drv_vbus(fsm, 0);
 518                         }
 519                         otg_dev->host_working = 0;
 520                 }
 521         }
 522 end:
 523         return retval;
 524 }
 525
 526 /*
 527  * Call suspend and resume function in udc driver
 528  * to stop and start udc driver.
 529  */
 530 int fsl_otg_start_gadget(struct otg_fsm *fsm, int on)
 531 {
 532         struct usb_otg *otg = fsm->otg;
 533         struct device *dev;
 534
 535         if (!otg->gadget || !otg->gadget->dev.parent)
 536                 return -ENODEV;
 537
 538         VDBG("gadget %s\n", on ? "on" : "off");
 539         dev = otg->gadget->dev.parent;
 540
 541         if (on) {
 542                 if (dev->driver->resume)
 543                         dev->driver->resume(dev);
 544         } else {
 545                 if (dev->driver->suspend)
 546                         dev->driver->suspend(dev, otg_suspend_state);
 547         }
 548
 549         return 0;
 550 }
 551
 552 /*
 553  * Called by initialization code of host driver.  Register host controller
 554  * to the OTG.  Suspend host for OTG role detection.
 555  */
 556 static int fsl_otg_set_host(struct usb_otg *otg, struct usb_bus *host)
 557 {
 558         struct fsl_otg *otg_dev;
 559
 560         if (!otg)
 561                 return -ENODEV;
 562
 563         otg_dev = container_of(otg->usb_phy, struct fsl_otg, phy);
 564         if (otg_dev != fsl_otg_dev)
 565                 return -ENODEV;
 566
 567         otg->host = host;
 568
 569         otg_dev->fsm.a_bus_drop = 0;
 570         otg_dev->fsm.a_bus_req = 1;
 571
 572         if (host) {
 573                 VDBG("host off......\n");
 574
 575                 otg->host->otg_port = fsl_otg_initdata.otg_port;
 576                 otg->host->is_b_host = otg_dev->fsm.id;
 577                 /*
 578                  * must leave time for hub_wq to finish its thing
 579                  * before yanking the host driver out from under it,
 580                  * so suspend the host after a short delay.
 581                  */
 582                 otg_dev->host_working = 1;
 583                 schedule_delayed_work(&otg_dev->otg_event, 100);
 584                 return 0;
 585         } else {
 586                 /* host driver going away */
 587                 if (!(fsl_readl(&otg_dev->dr_mem_map->otgsc) &
 588                       OTGSC_STS_USB_ID)) {
 589                         /* Mini-A cable connected */
 590                         struct otg_fsm *fsm = &otg_dev->fsm;
 591
 592                         otg->state = OTG_STATE_UNDEFINED;
 593                         fsm->protocol = PROTO_UNDEF;
 594                 }
 595         }
 596
 597         otg_dev->host_working = 0;
 598
 599         otg_statemachine(&otg_dev->fsm);
 600
 601         return 0;
 602 }
 603
 604 /* Called by initialization code of udc.  Register udc to OTG. */
 605 static int fsl_otg_set_peripheral(struct usb_otg *otg,
 606                                         struct usb_gadget *gadget)
 607 {
 608         struct fsl_otg *otg_dev;
 609
 610         if (!otg)
 611                 return -ENODEV;
 612
 613         otg_dev = container_of(otg->usb_phy, struct fsl_otg, phy);
 614         VDBG("otg_dev 0x%x\n", (int)otg_dev);
 615         VDBG("fsl_otg_dev 0x%x\n", (int)fsl_otg_dev);
 616         if (otg_dev != fsl_otg_dev)
 617                 return -ENODEV;
 618
 619         if (!gadget) {
 620                 if (!otg->default_a)
 621                         otg->gadget->ops->vbus_draw(otg->gadget, 0);
 622                 usb_gadget_vbus_disconnect(otg->gadget);
 623                 otg->gadget = 0;
 624                 otg_dev->fsm.b_bus_req = 0;
 625                 otg_statemachine(&otg_dev->fsm);
 626                 return 0;
 627         }
 628
 629         otg->gadget = gadget;
 630         otg->gadget->is_a_peripheral = !otg_dev->fsm.id;
 631
 632         otg_dev->fsm.b_bus_req = 1;
 633
 634         /* start the gadget right away if the ID pin says Mini-B */
 635         pr_debug("ID pin=%d\n", otg_dev->fsm.id);
 636         if (otg_dev->fsm.id == 1) {
 637                 fsl_otg_start_host(&otg_dev->fsm, 0);
 638                 otg_drv_vbus(&otg_dev->fsm, 0);
 639                 fsl_otg_start_gadget(&otg_dev->fsm, 1);
 640         }
 641
 642         return 0;
 643 }
 644
 645 /* Set OTG port power, only for B-device */
 646 static int fsl_otg_set_power(struct usb_phy *phy, unsigned mA)
 647 {
 648         if (!fsl_otg_dev)
 649                 return -ENODEV;
 650         if (phy->otg->state == OTG_STATE_B_PERIPHERAL)
 651                 pr_info("FSL OTG: Draw %d mA\n", mA);
 652
 653         return 0;
 654 }
 655
 656 /*
 657  * Delayed pin detect interrupt processing.
 658  *
 659  * When the Mini-A cable is disconnected from the board,
 660  * the pin-detect interrupt happens before the disconnect
 661  * interrupts for the connected device(s).  In order to
 662  * process the disconnect interrupt(s) prior to switching
 663  * roles, the pin-detect interrupts are delayed, and handled
 664  * by this routine.
 665  */
 666 static void fsl_otg_event(struct work_struct *work)
 667 {
 668         struct fsl_otg *og = container_of(work, struct fsl_otg, otg_event.work);
 669         struct otg_fsm *fsm = &og->fsm;
 670
 671         if (fsm->id) {          /* switch to gadget */
 672                 fsl_otg_start_host(fsm, 0);
 673                 otg_drv_vbus(fsm, 0);
 674                 fsl_otg_start_gadget(fsm, 1);
 675         }
 676 }
 677
 678 /* B-device start SRP */
 679 static int fsl_otg_start_srp(struct usb_otg *otg)
 680 {
 681         struct fsl_otg *otg_dev;
 682
 683         if (!otg || otg->state != OTG_STATE_B_IDLE)
 684                 return -ENODEV;
 685
 686         otg_dev = container_of(otg->usb_phy, struct fsl_otg, phy);
 687         if (otg_dev != fsl_otg_dev)
 688                 return -ENODEV;
 689
 690         otg_dev->fsm.b_bus_req = 1;
 691         otg_statemachine(&otg_dev->fsm);
 692
 693         return 0;
 694 }
 695
 696 /* A_host suspend will call this function to start hnp */
 697 static int fsl_otg_start_hnp(struct usb_otg *otg)
 698 {
 699         struct fsl_otg *otg_dev;
 700
 701         if (!otg)
 702                 return -ENODEV;
 703
 704         otg_dev = container_of(otg->usb_phy, struct fsl_otg, phy);
 705         if (otg_dev != fsl_otg_dev)
 706                 return -ENODEV;
 707
 708         pr_debug("start_hnp...\n");
 709
 710         /* clear a_bus_req to enter a_suspend state */
 711         otg_dev->fsm.a_bus_req = 0;
 712         otg_statemachine(&otg_dev->fsm);
 713
 714         return 0;
 715 }
 716
 717 /*
 718  * Interrupt handler.  OTG/host/peripheral share the same int line.
 719  * OTG driver clears OTGSC interrupts and leaves USB interrupts
 720  * intact.  It needs to have knowledge of some USB interrupts
 721  * such as port change.
 722  */
 723 irqreturn_t fsl_otg_isr(int irq, void *dev_id)
 724 {
 725         struct otg_fsm *fsm = &((struct fsl_otg *)dev_id)->fsm;
 726         struct usb_otg *otg = ((struct fsl_otg *)dev_id)->phy.otg;
 727         u32 otg_int_src, otg_sc;
 728
 729         otg_sc = fsl_readl(&usb_dr_regs->otgsc);
 730         otg_int_src = otg_sc & OTGSC_INTSTS_MASK & (otg_sc >> 8);
 731
 732         /* Only clear otg interrupts */
 733         fsl_writel(otg_sc, &usb_dr_regs->otgsc);
 734
 735         /*FIXME: ID change not generate when init to 0 */
 736         fsm->id = (otg_sc & OTGSC_STS_USB_ID) ? 1 : 0;
 737         otg->default_a = (fsm->id == 0);
 738
 739         /* process OTG interrupts */
 740         if (otg_int_src) {
 741                 if (otg_int_src & OTGSC_INTSTS_USB_ID) {
 742                         fsm->id = (otg_sc & OTGSC_STS_USB_ID) ? 1 : 0;
 743                         otg->default_a = (fsm->id == 0);
 744                         /* clear conn information */
 745                         if (fsm->id)
 746                                 fsm->b_conn = 0;
 747                         else
 748                                 fsm->a_conn = 0;
 749
 750                         if (otg->host)
 751                                 otg->host->is_b_host = fsm->id;
 752                         if (otg->gadget)
 753                                 otg->gadget->is_a_peripheral = !fsm->id;
 754                         VDBG("ID int (ID is %d)\n", fsm->id);
 755
 756                         if (fsm->id) {  /* switch to gadget */
 757                                 schedule_delayed_work(
 758                                         &((struct fsl_otg *)dev_id)->otg_event,
 759                                         100);
 760                         } else {        /* switch to host */
 761                                 cancel_delayed_work(&
 762                                                     ((struct fsl_otg *)dev_id)->
 763                                                     otg_event);
 764                                 fsl_otg_start_gadget(fsm, 0);
 765                                 otg_drv_vbus(fsm, 1);
 766                                 fsl_otg_start_host(fsm, 1);
 767                         }
 768                         return IRQ_HANDLED;
 769                 }
 770         }
 771         return IRQ_NONE;
 772 }
 773
 774 static struct otg_fsm_ops fsl_otg_ops = {
 775         .chrg_vbus = fsl_otg_chrg_vbus,
 776         .drv_vbus = fsl_otg_drv_vbus,
 777         .loc_conn = fsl_otg_loc_conn,
 778         .loc_sof = fsl_otg_loc_sof,
 779         .start_pulse = fsl_otg_start_pulse,
 780
 781         .add_timer = fsl_otg_fsm_add_timer,
 782         .del_timer = fsl_otg_fsm_del_timer,
 783
 784         .start_host = fsl_otg_start_host,
 785         .start_gadget = fsl_otg_start_gadget,
 786 };
 787
 788 /* Initialize the global variable fsl_otg_dev and request IRQ for OTG */
 789 static int fsl_otg_conf(struct platform_device *pdev)
 790 {
 791         struct fsl_otg *fsl_otg_tc;
 792         int status;
 793
 794         if (fsl_otg_dev)
 795                 return 0;
 796
 797         /* allocate space to fsl otg device */
 798         fsl_otg_tc = kzalloc(sizeof(struct fsl_otg), GFP_KERNEL);
 799         if (!fsl_otg_tc)
 800                 return -ENOMEM;
 801
 802         fsl_otg_tc->phy.otg = kzalloc(sizeof(struct usb_otg), GFP_KERNEL);
 803         if (!fsl_otg_tc->phy.otg) {
 804                 kfree(fsl_otg_tc);
 805                 return -ENOMEM;
 806         }
 807
 808         INIT_DELAYED_WORK(&fsl_otg_tc->otg_event, fsl_otg_event);
 809
 810         INIT_LIST_HEAD(&active_timers);
 811         status = fsl_otg_init_timers(&fsl_otg_tc->fsm);
 812         if (status) {
 813                 pr_info("Couldn't init OTG timers\n");
 814                 goto err;
 815         }
 816         mutex_init(&fsl_otg_tc->fsm.lock);
 817
 818         /* Set OTG state machine operations */
 819         fsl_otg_tc->fsm.ops = &fsl_otg_ops;
 820
 821         /* initialize the otg structure */
 822         fsl_otg_tc->phy.label = DRIVER_DESC;
 823         fsl_otg_tc->phy.dev = &pdev->dev;
 824         fsl_otg_tc->phy.set_power = fsl_otg_set_power;
 825
 826         fsl_otg_tc->phy.otg->usb_phy = &fsl_otg_tc->phy;
 827         fsl_otg_tc->phy.otg->set_host = fsl_otg_set_host;
 828         fsl_otg_tc->phy.otg->set_peripheral = fsl_otg_set_peripheral;
 829         fsl_otg_tc->phy.otg->start_hnp = fsl_otg_start_hnp;
 830         fsl_otg_tc->phy.otg->start_srp = fsl_otg_start_srp;
 831
 832         fsl_otg_dev = fsl_otg_tc;
 833
 834         /* Store the otg transceiver */
 835         status = usb_add_phy(&fsl_otg_tc->phy, USB_PHY_TYPE_USB2);
 836         if (status) {
 837                 pr_warn(FSL_OTG_NAME ": unable to register OTG transceiver.\n");
 838                 goto err;
 839         }
 840
 841         return 0;
 842 err:
 843         fsl_otg_uninit_timers();
 844         kfree(fsl_otg_tc->phy.otg);
 845         kfree(fsl_otg_tc);
 846         return status;
 847 }
 848
 849 /* OTG Initialization */
 850 int usb_otg_start(struct platform_device *pdev)
 851 {
 852         struct fsl_otg *p_otg;
 853         struct usb_phy *otg_trans = usb_get_phy(USB_PHY_TYPE_USB2);
 854         struct otg_fsm *fsm;
 855         int status;
 856         struct resource *res;
 857         u32 temp;
 858         struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev);
 859
 860         p_otg = container_of(otg_trans, struct fsl_otg, phy);
 861         fsm = &p_otg->fsm;
 862
 863         /* Initialize the state machine structure with default values */
 864         SET_OTG_STATE(otg_trans, OTG_STATE_UNDEFINED);
 865         fsm->otg = p_otg->phy.otg;
 866
 867         /* We don't require predefined MEM/IRQ resource index */
 868         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 869         if (!res)
 870                 return -ENXIO;
 871
 872         /* We don't request_mem_region here to enable resource sharing
 873          * with host/device */
 874
 875         usb_dr_regs = ioremap(res->start, sizeof(struct usb_dr_mmap));
 876         p_otg->dr_mem_map = (struct usb_dr_mmap *)usb_dr_regs;
 877         pdata->regs = (void *)usb_dr_regs;
 878
 879         if (pdata->init && pdata->init(pdev) != 0)
 880                 return -EINVAL;
 881
 882         if (pdata->big_endian_mmio) {
 883                 _fsl_readl = _fsl_readl_be;
 884                 _fsl_writel = _fsl_writel_be;
 885         } else {
 886                 _fsl_readl = _fsl_readl_le;
 887                 _fsl_writel = _fsl_writel_le;
 888         }
 889
 890         /* request irq */
 891         p_otg->irq = platform_get_irq(pdev, 0);
 892         status = request_irq(p_otg->irq, fsl_otg_isr,
 893                                 IRQF_SHARED, driver_name, p_otg);
 894         if (status) {
 895                 dev_dbg(p_otg->phy.dev, "can't get IRQ %d, error %d\n",
 896                         p_otg->irq, status);
 897                 iounmap(p_otg->dr_mem_map);
 898                 kfree(p_otg->phy.otg);
 899                 kfree(p_otg);
 900                 return status;
 901         }
 902
 903         /* stop the controller */
 904         temp = fsl_readl(&p_otg->dr_mem_map->usbcmd);
 905         temp &= ~USB_CMD_RUN_STOP;
 906         fsl_writel(temp, &p_otg->dr_mem_map->usbcmd);
 907
 908         /* reset the controller */
 909         temp = fsl_readl(&p_otg->dr_mem_map->usbcmd);
 910         temp |= USB_CMD_CTRL_RESET;
 911         fsl_writel(temp, &p_otg->dr_mem_map->usbcmd);
 912
 913         /* wait reset completed */
 914         while (fsl_readl(&p_otg->dr_mem_map->usbcmd) & USB_CMD_CTRL_RESET)
 915                 ;
 916
 917         /* configure the VBUSHS as IDLE(both host and device) */
 918         temp = USB_MODE_STREAM_DISABLE | (pdata->es ? USB_MODE_ES : 0);
 919         fsl_writel(temp, &p_otg->dr_mem_map->usbmode);
 920
 921         /* configure PHY interface */
 922         temp = fsl_readl(&p_otg->dr_mem_map->portsc);
 923         temp &= ~(PORTSC_PHY_TYPE_SEL | PORTSC_PTW);
 924         switch (pdata->phy_mode) {
 925         case FSL_USB2_PHY_ULPI:
 926                 temp |= PORTSC_PTS_ULPI;
 927                 break;
 928         case FSL_USB2_PHY_UTMI_WIDE:
 929                 temp |= PORTSC_PTW_16BIT;
 930                 /* fall through */
 931         case FSL_USB2_PHY_UTMI:
 932                 temp |= PORTSC_PTS_UTMI;
 933                 /* fall through */
 934         default:
 935                 break;
 936         }
 937         fsl_writel(temp, &p_otg->dr_mem_map->portsc);
 938
 939         if (pdata->have_sysif_regs) {
 940                 /* configure control enable IO output, big endian register */
 941                 temp = __raw_readl(&p_otg->dr_mem_map->control);
 942                 temp |= USB_CTRL_IOENB;
 943                 __raw_writel(temp, &p_otg->dr_mem_map->control);
 944         }
 945
 946         /* disable all interrupt and clear all OTGSC status */
 947         temp = fsl_readl(&p_otg->dr_mem_map->otgsc);
 948         temp &= ~OTGSC_INTERRUPT_ENABLE_BITS_MASK;
 949         temp |= OTGSC_INTERRUPT_STATUS_BITS_MASK | OTGSC_CTRL_VBUS_DISCHARGE;
 950         fsl_writel(temp, &p_otg->dr_mem_map->otgsc);
 951
 952         /*
 953          * The identification (id) input is FALSE when a Mini-A plug is inserted
 954          * in the devices Mini-AB receptacle. Otherwise, this input is TRUE.
 955          * Also: record initial state of ID pin
 956          */
 957         if (fsl_readl(&p_otg->dr_mem_map->otgsc) & OTGSC_STS_USB_ID) {
 958                 p_otg->phy.otg->state = OTG_STATE_UNDEFINED;
 959                 p_otg->fsm.id = 1;
 960         } else {
 961                 p_otg->phy.otg->state = OTG_STATE_A_IDLE;
 962                 p_otg->fsm.id = 0;
 963         }
 964
 965         pr_debug("initial ID pin=%d\n", p_otg->fsm.id);
 966
 967         /* enable OTG ID pin interrupt */
 968         temp = fsl_readl(&p_otg->dr_mem_map->otgsc);
 969         temp |= OTGSC_INTR_USB_ID_EN;
 970         temp &= ~(OTGSC_CTRL_VBUS_DISCHARGE | OTGSC_INTR_1MS_TIMER_EN);
 971         fsl_writel(temp, &p_otg->dr_mem_map->otgsc);
 972
 973         return 0;
 974 }
 975
 976 /*
 977  * state file in sysfs
 978  */
 979 static int show_fsl_usb2_otg_state(struct device *dev,
 980                                    struct device_attribute *attr, char *buf)
 981 {
 982         struct otg_fsm *fsm = &fsl_otg_dev->fsm;
 983         char *next = buf;
 984         unsigned size = PAGE_SIZE;
 985         int t;
 986
 987         mutex_lock(&fsm->lock);
 988
 989         /* basic driver infomation */
 990         t = scnprintf(next, size,
 991                         DRIVER_DESC "\n" "fsl_usb2_otg version: %s\n\n",
 992                         DRIVER_VERSION);
 993         size -= t;
 994         next += t;
 995
 996         /* Registers */
 997         t = scnprintf(next, size,
 998                         "OTGSC:   0x%08x\n"
 999                         "PORTSC:  0x%08x\n"
1000                         "USBMODE: 0x%08x\n"
1001                         "USBCMD:  0x%08x\n"
1002                         "USBSTS:  0x%08x\n"
1003                         "USBINTR: 0x%08x\n",
1004                         fsl_readl(&usb_dr_regs->otgsc),
1005                         fsl_readl(&usb_dr_regs->portsc),
1006                         fsl_readl(&usb_dr_regs->usbmode),
1007                         fsl_readl(&usb_dr_regs->usbcmd),
1008                         fsl_readl(&usb_dr_regs->usbsts),
1009                         fsl_readl(&usb_dr_regs->usbintr));
1010         size -= t;
1011         next += t;
1012
1013         /* State */
1014         t = scnprintf(next, size,
1015                       "OTG state: %s\n\n",
1016                       usb_otg_state_string(fsl_otg_dev->phy.otg->state));
1017         size -= t;
1018         next += t;
1019
1020         /* State Machine Variables */
1021         t = scnprintf(next, size,
1022                         "a_bus_req: %d\n"
1023                         "b_bus_req: %d\n"
1024                         "a_bus_resume: %d\n"
1025                         "a_bus_suspend: %d\n"
1026                         "a_conn: %d\n"
1027                         "a_sess_vld: %d\n"
1028                         "a_srp_det: %d\n"
1029                         "a_vbus_vld: %d\n"
1030                         "b_bus_resume: %d\n"
1031                         "b_bus_suspend: %d\n"
1032                         "b_conn: %d\n"
1033                         "b_se0_srp: %d\n"
1034                         "b_ssend_srp: %d\n"
1035                         "b_sess_vld: %d\n"
1036                         "id: %d\n",
1037                         fsm->a_bus_req,
1038                         fsm->b_bus_req,
1039                         fsm->a_bus_resume,
1040                         fsm->a_bus_suspend,
1041                         fsm->a_conn,
1042                         fsm->a_sess_vld,
1043                         fsm->a_srp_det,
1044                         fsm->a_vbus_vld,
1045                         fsm->b_bus_resume,
1046                         fsm->b_bus_suspend,
1047                         fsm->b_conn,
1048                         fsm->b_se0_srp,
1049                         fsm->b_ssend_srp,
1050                         fsm->b_sess_vld,
1051                         fsm->id);
1052         size -= t;
1053         next += t;
1054
1055         mutex_unlock(&fsm->lock);
1056
1057         return PAGE_SIZE - size;
1058 }
1059
1060 static DEVICE_ATTR(fsl_usb2_otg_state, S_IRUGO, show_fsl_usb2_otg_state, NULL);
1061
1062
1063 /* Char driver interface to control some OTG input */
1064
1065 /*
1066  * Handle some ioctl command, such as get otg
1067  * status and set host suspend
1068  */
1069 static long fsl_otg_ioctl(struct file *file, unsigned int cmd,
1070                           unsigned long arg)
1071 {
1072         u32 retval = 0;
1073
1074         switch (cmd) {
1075         case GET_OTG_STATUS:
1076                 retval = fsl_otg_dev->host_working;
1077                 break;
1078
1079         case SET_A_SUSPEND_REQ:
1080                 fsl_otg_dev->fsm.a_suspend_req_inf = arg;
1081                 break;
1082
1083         case SET_A_BUS_DROP:
1084                 fsl_otg_dev->fsm.a_bus_drop = arg;
1085                 break;
1086
1087         case SET_A_BUS_REQ:
1088                 fsl_otg_dev->fsm.a_bus_req = arg;
1089                 break;
1090
1091         case SET_B_BUS_REQ:
1092                 fsl_otg_dev->fsm.b_bus_req = arg;
1093                 break;
1094
1095         default:
1096                 break;
1097         }
1098
1099         otg_statemachine(&fsl_otg_dev->fsm);
1100
1101         return retval;
1102 }
1103
1104 static int fsl_otg_open(struct inode *inode, struct file *file)
1105 {
1106         return 0;
1107 }
1108
1109 static int fsl_otg_release(struct inode *inode, struct file *file)
1110 {
1111         return 0;
1112 }
1113
1114 static const struct file_operations otg_fops = {
1115         .owner = THIS_MODULE,
1116         .llseek = NULL,
1117         .read = NULL,
1118         .write = NULL,
1119         .unlocked_ioctl = fsl_otg_ioctl,
1120         .open = fsl_otg_open,
1121         .release = fsl_otg_release,
1122 };
1123
1124 static int fsl_otg_probe(struct platform_device *pdev)
1125 {
1126         int ret;
1127
1128         if (!dev_get_platdata(&pdev->dev))
1129                 return -ENODEV;
1130
1131         /* configure the OTG */
1132         ret = fsl_otg_conf(pdev);
1133         if (ret) {
1134                 dev_err(&pdev->dev, "Couldn't configure OTG module\n");
1135                 return ret;
1136         }
1137
1138         /* start OTG */
1139         ret = usb_otg_start(pdev);
1140         if (ret) {
1141                 dev_err(&pdev->dev, "Can't init FSL OTG device\n");
1142                 return ret;
1143         }
1144
1145         ret = register_chrdev(FSL_OTG_MAJOR, FSL_OTG_NAME, &otg_fops);
1146         if (ret) {
1147                 dev_err(&pdev->dev, "unable to register FSL OTG device\n");
1148                 return ret;
1149         }
1150
1151         ret = device_create_file(&pdev->dev, &dev_attr_fsl_usb2_otg_state);
1152         if (ret)
1153                 dev_warn(&pdev->dev, "Can't register sysfs attribute\n");
1154
1155         return ret;
1156 }
1157
1158 static int fsl_otg_remove(struct platform_device *pdev)
1159 {
1160         struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev);
1161
1162         usb_remove_phy(&fsl_otg_dev->phy);
1163         free_irq(fsl_otg_dev->irq, fsl_otg_dev);
1164
1165         iounmap((void *)usb_dr_regs);
1166
1167         fsl_otg_uninit_timers();
1168         kfree(fsl_otg_dev->phy.otg);
1169         kfree(fsl_otg_dev);
1170
1171         device_remove_file(&pdev->dev, &dev_attr_fsl_usb2_otg_state);
1172
1173         unregister_chrdev(FSL_OTG_MAJOR, FSL_OTG_NAME);
1174
1175         if (pdata->exit)
1176                 pdata->exit(pdev);
1177
1178         return 0;
1179 }
1180
1181 struct platform_driver fsl_otg_driver = {
1182         .probe = fsl_otg_probe,
1183         .remove = fsl_otg_remove,
1184         .driver = {
1185                 .name = driver_name,
1186                 .owner = THIS_MODULE,
1187         },
1188 };
1189
1190 module_platform_driver(fsl_otg_driver);
1191
1192 MODULE_DESCRIPTION(DRIVER_INFO);
1193 MODULE_AUTHOR(DRIVER_AUTHOR);
1194 MODULE_LICENSE("GPL");