drivers/scsi/aacraid/src.c

   1 /*
   2  *      Adaptec AAC series RAID controller driver
   3  *      (c) Copyright 2001 Red Hat Inc.
   4  *
   5  * based on the old aacraid driver that is..
   6  * Adaptec aacraid device driver for Linux.
   7  *
   8  * Copyright (c) 2000-2010 Adaptec, Inc.
   9  *               2010 PMC-Sierra, Inc. (aacraid@pmc-sierra.com)
  10  *
  11  * This program is free software; you can redistribute it and/or modify
  12  * it under the terms of the GNU General Public License as published by
  13  * the Free Software Foundation; either version 2, or (at your option)
  14  * any later version.
  15  *
  16  * This program is distributed in the hope that it will be useful,
  17  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  18  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  19  * GNU General Public License for more details.
  20  *
  21  * You should have received a copy of the GNU General Public License
  22  * along with this program; see the file COPYING.  If not, write to
  23  * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
  24  *
  25  * Module Name:
  26  *  src.c
  27  *
  28  * Abstract: Hardware Device Interface for PMC SRC based controllers
  29  *
  30  */
  31
  32 #include <linux/kernel.h>
  33 #include <linux/init.h>
  34 #include <linux/types.h>
  35 #include <linux/pci.h>
  36 #include <linux/spinlock.h>
  37 #include <linux/slab.h>
  38 #include <linux/blkdev.h>
  39 #include <linux/delay.h>
  40 #include <linux/completion.h>
  41 #include <linux/time.h>
  42 #include <linux/interrupt.h>
  43 #include <scsi/scsi_host.h>
  44
  45 #include "aacraid.h"
  46
  47 static irqreturn_t aac_src_intr_message(int irq, void *dev_id)
  48 {
  49         struct aac_dev *dev = dev_id;
  50         unsigned long bellbits, bellbits_shifted;
  51         int our_interrupt = 0;
  52         int isFastResponse;
  53         u32 index, handle;
  54
  55         bellbits = src_readl(dev, MUnit.ODR_R);
  56         if (bellbits & PmDoorBellResponseSent) {
  57                 bellbits = PmDoorBellResponseSent;
  58                 /* handle async. status */
  59                 src_writel(dev, MUnit.ODR_C, bellbits);
  60                 src_readl(dev, MUnit.ODR_C);
  61                 our_interrupt = 1;
  62                 index = dev->host_rrq_idx;
  63                 for (;;) {
  64                         isFastResponse = 0;
  65                         /* remove toggle bit (31) */
  66                         handle = le32_to_cpu(dev->host_rrq[index]) & 0x7fffffff;
  67                         /* check fast response bit (30) */
  68                         if (handle & 0x40000000)
  69                                 isFastResponse = 1;
  70                         handle &= 0x0000ffff;
  71                         if (handle == 0)
  72                                 break;
  73
  74                         aac_intr_normal(dev, handle-1, 0, isFastResponse, NULL);
  75
  76                         dev->host_rrq[index++] = 0;
  77                         if (index == dev->scsi_host_ptr->can_queue +
  78                                                 AAC_NUM_MGT_FIB)
  79                                 index = 0;
  80                         dev->host_rrq_idx = index;
  81                 }
  82         } else {
  83                 bellbits_shifted = (bellbits >> SRC_ODR_SHIFT);
  84                 if (bellbits_shifted & DoorBellAifPending) {
  85                         src_writel(dev, MUnit.ODR_C, bellbits);
  86                         src_readl(dev, MUnit.ODR_C);
  87                         our_interrupt = 1;
  88                         /* handle AIF */
  89                         aac_intr_normal(dev, 0, 2, 0, NULL);
  90                 } else if (bellbits_shifted & OUTBOUNDDOORBELL_0) {
  91                         unsigned long sflags;
  92                         struct list_head *entry;
  93                         int send_it = 0;
  94                         extern int aac_sync_mode;
  95
  96                         src_writel(dev, MUnit.ODR_C, bellbits);
  97                         src_readl(dev, MUnit.ODR_C);
  98
  99                         if (!aac_sync_mode) {
 100                                 src_writel(dev, MUnit.ODR_C, bellbits);
 101                                 src_readl(dev, MUnit.ODR_C);
 102                                 our_interrupt = 1;
 103                         }
 104
 105                         if (dev->sync_fib) {
 106                                 our_interrupt = 1;
 107                                 if (dev->sync_fib->callback)
 108                                         dev->sync_fib->callback(dev->sync_fib->callback_data,
 109                                                 dev->sync_fib);
 110                                 spin_lock_irqsave(&dev->sync_fib->event_lock, sflags);
 111                                 if (dev->sync_fib->flags & FIB_CONTEXT_FLAG_WAIT) {
 112                                         dev->management_fib_count--;
 113                                         up(&dev->sync_fib->event_wait);
 114                                 }
 115                                 spin_unlock_irqrestore(&dev->sync_fib->event_lock, sflags);
 116                                 spin_lock_irqsave(&dev->sync_lock, sflags);
 117                                 if (!list_empty(&dev->sync_fib_list)) {
 118                                         entry = dev->sync_fib_list.next;
 119                                         dev->sync_fib = list_entry(entry, struct fib, fiblink);
 120                                         list_del(entry);
 121                                         send_it = 1;
 122                                 } else {
 123                                         dev->sync_fib = NULL;
 124                                 }
 125                                 spin_unlock_irqrestore(&dev->sync_lock, sflags);
 126                                 if (send_it) {
 127                                         aac_adapter_sync_cmd(dev, SEND_SYNCHRONOUS_FIB,
 128                                                 (u32)dev->sync_fib->hw_fib_pa, 0, 0, 0, 0, 0,
 129                                                 NULL, NULL, NULL, NULL, NULL);
 130                                 }
 131                         }
 132                 }
 133         }
 134
 135         if (our_interrupt) {
 136                 return IRQ_HANDLED;
 137         }
 138         return IRQ_NONE;
 139 }
 140
 141 /**
 142  *      aac_src_disable_interrupt       -       Disable interrupts
 143  *      @dev: Adapter
 144  */
 145
 146 static void aac_src_disable_interrupt(struct aac_dev *dev)
 147 {
 148         src_writel(dev, MUnit.OIMR, dev->OIMR = 0xffffffff);
 149 }
 150
 151 /**
 152  *      aac_src_enable_interrupt_message        -       Enable interrupts
 153  *      @dev: Adapter
 154  */
 155
 156 static void aac_src_enable_interrupt_message(struct aac_dev *dev)
 157 {
 158         src_writel(dev, MUnit.OIMR, dev->OIMR = 0xfffffff8);
 159 }
 160
 161 /**
 162  *      src_sync_cmd    -       send a command and wait
 163  *      @dev: Adapter
 164  *      @command: Command to execute
 165  *      @p1: first parameter
 166  *      @ret: adapter status
 167  *
 168  *      This routine will send a synchronous command to the adapter and wait
 169  *      for its completion.
 170  */
 171
 172 static int src_sync_cmd(struct aac_dev *dev, u32 command,
 173         u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6,
 174         u32 *status, u32 * r1, u32 * r2, u32 * r3, u32 * r4)
 175 {
 176         unsigned long start;
 177         int ok;
 178
 179         /*
 180          *      Write the command into Mailbox 0
 181          */
 182         writel(command, &dev->IndexRegs->Mailbox[0]);
 183         /*
 184          *      Write the parameters into Mailboxes 1 - 6
 185          */
 186         writel(p1, &dev->IndexRegs->Mailbox[1]);
 187         writel(p2, &dev->IndexRegs->Mailbox[2]);
 188         writel(p3, &dev->IndexRegs->Mailbox[3]);
 189         writel(p4, &dev->IndexRegs->Mailbox[4]);
 190
 191         /*
 192          *      Clear the synch command doorbell to start on a clean slate.
 193          */
 194         src_writel(dev, MUnit.ODR_C, OUTBOUNDDOORBELL_0 << SRC_ODR_SHIFT);
 195
 196         /*
 197          *      Disable doorbell interrupts
 198          */
 199         src_writel(dev, MUnit.OIMR, dev->OIMR = 0xffffffff);
 200
 201         /*
 202          *      Force the completion of the mask register write before issuing
 203          *      the interrupt.
 204          */
 205         src_readl(dev, MUnit.OIMR);
 206
 207         /*
 208          *      Signal that there is a new synch command
 209          */
 210         src_writel(dev, MUnit.IDR, INBOUNDDOORBELL_0 << SRC_IDR_SHIFT);
 211
 212         if (!dev->sync_mode || command != SEND_SYNCHRONOUS_FIB) {
 213                 ok = 0;
 214                 start = jiffies;
 215
 216                 /*
 217                  *      Wait up to 5 minutes
 218                  */
 219                 while (time_before(jiffies, start+300*HZ)) {
 220                         udelay(5);      /* Delay 5 microseconds to let Mon960 get info. */
 221                         /*
 222                          *      Mon960 will set doorbell0 bit when it has completed the command.
 223                          */
 224                         if ((src_readl(dev, MUnit.ODR_R) >> SRC_ODR_SHIFT) & OUTBOUNDDOORBELL_0) {
 225                                 /*
 226                                  *      Clear the doorbell.
 227                                  */
 228                                 src_writel(dev, MUnit.ODR_C, OUTBOUNDDOORBELL_0 << SRC_ODR_SHIFT);
 229                                 ok = 1;
 230                                 break;
 231                         }
 232                         /*
 233                          *      Yield the processor in case we are slow
 234                          */
 235                         msleep(1);
 236                 }
 237                 if (unlikely(ok != 1)) {
 238                         /*
 239                          *      Restore interrupt mask even though we timed out
 240                          */
 241                         aac_adapter_enable_int(dev);
 242                         return -ETIMEDOUT;
 243                 }
 244                 /*
 245                  *      Pull the synch status from Mailbox 0.
 246                  */
 247                 if (status)
 248                         *status = readl(&dev->IndexRegs->Mailbox[0]);
 249                 if (r1)
 250                         *r1 = readl(&dev->IndexRegs->Mailbox[1]);
 251                 if (r2)
 252                         *r2 = readl(&dev->IndexRegs->Mailbox[2]);
 253                 if (r3)
 254                         *r3 = readl(&dev->IndexRegs->Mailbox[3]);
 255                 if (r4)
 256                         *r4 = readl(&dev->IndexRegs->Mailbox[4]);
 257
 258                 /*
 259                  *      Clear the synch command doorbell.
 260                  */
 261                 src_writel(dev, MUnit.ODR_C, OUTBOUNDDOORBELL_0 << SRC_ODR_SHIFT);
 262         }
 263
 264         /*
 265          *      Restore interrupt mask
 266          */
 267         aac_adapter_enable_int(dev);
 268         return 0;
 269 }
 270
 271 /**
 272  *      aac_src_interrupt_adapter       -       interrupt adapter
 273  *      @dev: Adapter
 274  *
 275  *      Send an interrupt to the i960 and breakpoint it.
 276  */
 277
 278 static void aac_src_interrupt_adapter(struct aac_dev *dev)
 279 {
 280         src_sync_cmd(dev, BREAKPOINT_REQUEST,
 281                 0, 0, 0, 0, 0, 0,
 282                 NULL, NULL, NULL, NULL, NULL);
 283 }
 284
 285 /**
 286  *      aac_src_notify_adapter          -       send an event to the adapter
 287  *      @dev: Adapter
 288  *      @event: Event to send
 289  *
 290  *      Notify the i960 that something it probably cares about has
 291  *      happened.
 292  */
 293
 294 static void aac_src_notify_adapter(struct aac_dev *dev, u32 event)
 295 {
 296         switch (event) {
 297
 298         case AdapNormCmdQue:
 299                 src_writel(dev, MUnit.ODR_C,
 300                         INBOUNDDOORBELL_1 << SRC_ODR_SHIFT);
 301                 break;
 302         case HostNormRespNotFull:
 303                 src_writel(dev, MUnit.ODR_C,
 304                         INBOUNDDOORBELL_4 << SRC_ODR_SHIFT);
 305                 break;
 306         case AdapNormRespQue:
 307                 src_writel(dev, MUnit.ODR_C,
 308                         INBOUNDDOORBELL_2 << SRC_ODR_SHIFT);
 309                 break;
 310         case HostNormCmdNotFull:
 311                 src_writel(dev, MUnit.ODR_C,
 312                         INBOUNDDOORBELL_3 << SRC_ODR_SHIFT);
 313                 break;
 314         case FastIo:
 315                 src_writel(dev, MUnit.ODR_C,
 316                         INBOUNDDOORBELL_6 << SRC_ODR_SHIFT);
 317                 break;
 318         case AdapPrintfDone:
 319                 src_writel(dev, MUnit.ODR_C,
 320                         INBOUNDDOORBELL_5 << SRC_ODR_SHIFT);
 321                 break;
 322         default:
 323                 BUG();
 324                 break;
 325         }
 326 }
 327
 328 /**
 329  *      aac_src_start_adapter           -       activate adapter
 330  *      @dev:   Adapter
 331  *
 332  *      Start up processing on an i960 based AAC adapter
 333  */
 334
 335 static void aac_src_start_adapter(struct aac_dev *dev)
 336 {
 337         struct aac_init *init;
 338
 339          /* reset host_rrq_idx first */
 340         dev->host_rrq_idx = 0;
 341
 342         init = dev->init;
 343         init->HostElapsedSeconds = cpu_to_le32(get_seconds());
 344
 345         /* We can only use a 32 bit address here */
 346         src_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, (u32)(ulong)dev->init_pa,
 347           0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL);
 348 }
 349
 350 /**
 351  *      aac_src_check_health
 352  *      @dev: device to check if healthy
 353  *
 354  *      Will attempt to determine if the specified adapter is alive and
 355  *      capable of handling requests, returning 0 if alive.
 356  */
 357 static int aac_src_check_health(struct aac_dev *dev)
 358 {
 359         u32 status = src_readl(dev, MUnit.OMR);
 360
 361         /*
 362          *      Check to see if the board failed any self tests.
 363          */
 364         if (unlikely(status & SELF_TEST_FAILED))
 365                 return -1;
 366
 367         /*
 368          *      Check to see if the board panic'd.
 369          */
 370         if (unlikely(status & KERNEL_PANIC))
 371                 return (status >> 16) & 0xFF;
 372         /*
 373          *      Wait for the adapter to be up and running.
 374          */
 375         if (unlikely(!(status & KERNEL_UP_AND_RUNNING)))
 376                 return -3;
 377         /*
 378          *      Everything is OK
 379          */
 380         return 0;
 381 }
 382
 383 /**
 384  *      aac_src_deliver_message
 385  *      @fib: fib to issue
 386  *
 387  *      Will send a fib, returning 0 if successful.
 388  */
 389 static int aac_src_deliver_message(struct fib *fib)
 390 {
 391         struct aac_dev *dev = fib->dev;
 392         struct aac_queue *q = &dev->queues->queue[AdapNormCmdQueue];
 393         unsigned long qflags;
 394         u32 fibsize;
 395         dma_addr_t address;
 396         struct aac_fib_xporthdr *pFibX;
 397         u16 hdr_size = le16_to_cpu(fib->hw_fib_va->header.Size);
 398
 399         spin_lock_irqsave(q->lock, qflags);
 400         q->numpending++;
 401         spin_unlock_irqrestore(q->lock, qflags);
 402
 403         if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE2) {
 404                 /* Calculate the amount to the fibsize bits */
 405                 fibsize = (hdr_size + 127) / 128 - 1;
 406                 if (fibsize > (ALIGN32 - 1))
 407                         return -EMSGSIZE;
 408                 /* New FIB header, 32-bit */
 409                 address = fib->hw_fib_pa;
 410                 fib->hw_fib_va->header.StructType = FIB_MAGIC2;
 411                 fib->hw_fib_va->header.SenderFibAddress = (u32)address;
 412                 fib->hw_fib_va->header.u.TimeStamp = 0;
 413                 BUG_ON(upper_32_bits(address) != 0L);
 414                 address |= fibsize;
 415         } else {
 416                 /* Calculate the amount to the fibsize bits */
 417                 fibsize = (sizeof(struct aac_fib_xporthdr) + hdr_size + 127) / 128 - 1;
 418                 if (fibsize > (ALIGN32 - 1))
 419                         return -EMSGSIZE;
 420
 421                 /* Fill XPORT header */
 422                 pFibX = (void *)fib->hw_fib_va - sizeof(struct aac_fib_xporthdr);
 423                 pFibX->Handle = cpu_to_le32(fib->hw_fib_va->header.Handle);
 424                 pFibX->HostAddress = cpu_to_le64(fib->hw_fib_pa);
 425                 pFibX->Size = cpu_to_le32(hdr_size);
 426
 427                 /*
 428                  * The xport header has been 32-byte aligned for us so that fibsize
 429                  * can be masked out of this address by hardware. -- BenC
 430                  */
 431                 address = fib->hw_fib_pa - sizeof(struct aac_fib_xporthdr);
 432                 if (address & (ALIGN32 - 1))
 433                         return -EINVAL;
 434                 address |= fibsize;
 435         }
 436
 437         src_writel(dev, MUnit.IQ_H, upper_32_bits(address) & 0xffffffff);
 438         src_writel(dev, MUnit.IQ_L, address & 0xffffffff);
 439
 440         return 0;
 441 }
 442
 443 /**
 444  *      aac_src_ioremap
 445  *      @size: mapping resize request
 446  *
 447  */
 448 static int aac_src_ioremap(struct aac_dev *dev, u32 size)
 449 {
 450         if (!size) {
 451                 iounmap(dev->regs.src.bar1);
 452                 dev->regs.src.bar1 = NULL;
 453                 iounmap(dev->regs.src.bar0);
 454                 dev->base = dev->regs.src.bar0 = NULL;
 455                 return 0;
 456         }
 457         dev->regs.src.bar1 = ioremap(pci_resource_start(dev->pdev, 2),
 458                 AAC_MIN_SRC_BAR1_SIZE);
 459         dev->base = NULL;
 460         if (dev->regs.src.bar1 == NULL)
 461                 return -1;
 462         dev->base = dev->regs.src.bar0 = ioremap(dev->base_start, size);
 463         if (dev->base == NULL) {
 464                 iounmap(dev->regs.src.bar1);
 465                 dev->regs.src.bar1 = NULL;
 466                 return -1;
 467         }
 468         dev->IndexRegs = &((struct src_registers __iomem *)
 469                 dev->base)->u.tupelo.IndexRegs;
 470         return 0;
 471 }
 472
 473 /**
 474  *  aac_srcv_ioremap
 475  *      @size: mapping resize request
 476  *
 477  */
 478 static int aac_srcv_ioremap(struct aac_dev *dev, u32 size)
 479 {
 480         if (!size) {
 481                 iounmap(dev->regs.src.bar0);
 482                 dev->base = dev->regs.src.bar0 = NULL;
 483                 return 0;
 484         }
 485         dev->base = dev->regs.src.bar0 = ioremap(dev->base_start, size);
 486         if (dev->base == NULL)
 487                 return -1;
 488         dev->IndexRegs = &((struct src_registers __iomem *)
 489                 dev->base)->u.denali.IndexRegs;
 490         return 0;
 491 }
 492
 493 static int aac_src_restart_adapter(struct aac_dev *dev, int bled)
 494 {
 495         u32 var, reset_mask;
 496
 497         if (bled >= 0) {
 498                 if (bled)
 499                         printk(KERN_ERR "%s%d: adapter kernel panic'd %x.\n",
 500                                 dev->name, dev->id, bled);
 501                 bled = aac_adapter_sync_cmd(dev, IOP_RESET_ALWAYS,
 502                         0, 0, 0, 0, 0, 0, &var, &reset_mask, NULL, NULL, NULL);
 503                         if (bled || (var != 0x00000001))
 504                                 return -EINVAL;
 505                 if (dev->supplement_adapter_info.SupportedOptions2 &
 506                         AAC_OPTION_DOORBELL_RESET) {
 507                         src_writel(dev, MUnit.IDR, reset_mask);
 508                         msleep(5000); /* Delay 5 seconds */
 509                 }
 510         }
 511
 512         if (src_readl(dev, MUnit.OMR) & KERNEL_PANIC)
 513                 return -ENODEV;
 514
 515         if (startup_timeout < 300)
 516                 startup_timeout = 300;
 517
 518         return 0;
 519 }
 520
 521 /**
 522  *      aac_src_select_comm     -       Select communications method
 523  *      @dev: Adapter
 524  *      @comm: communications method
 525  */
 526 int aac_src_select_comm(struct aac_dev *dev, int comm)
 527 {
 528         switch (comm) {
 529         case AAC_COMM_MESSAGE:
 530                 dev->a_ops.adapter_enable_int = aac_src_enable_interrupt_message;
 531                 dev->a_ops.adapter_intr = aac_src_intr_message;
 532                 dev->a_ops.adapter_deliver = aac_src_deliver_message;
 533                 break;
 534         default:
 535                 return 1;
 536         }
 537         return 0;
 538 }
 539
 540 /**
 541  *  aac_src_init        -       initialize an Cardinal Frey Bar card
 542  *  @dev: device to configure
 543  *
 544  */
 545
 546 int aac_src_init(struct aac_dev *dev)
 547 {
 548         unsigned long start;
 549         unsigned long status;
 550         int restart = 0;
 551         int instance = dev->id;
 552         const char *name = dev->name;
 553
 554         dev->a_ops.adapter_ioremap = aac_src_ioremap;
 555         dev->a_ops.adapter_comm = aac_src_select_comm;
 556
 557         dev->base_size = AAC_MIN_SRC_BAR0_SIZE;
 558         if (aac_adapter_ioremap(dev, dev->base_size)) {
 559                 printk(KERN_WARNING "%s: unable to map adapter.\n", name);
 560                 goto error_iounmap;
 561         }
 562
 563         /* Failure to reset here is an option ... */
 564         dev->a_ops.adapter_sync_cmd = src_sync_cmd;
 565         dev->a_ops.adapter_enable_int = aac_src_disable_interrupt;
 566         if ((aac_reset_devices || reset_devices) &&
 567                 !aac_src_restart_adapter(dev, 0))
 568                 ++restart;
 569         /*
 570          *      Check to see if the board panic'd while booting.
 571          */
 572         status = src_readl(dev, MUnit.OMR);
 573         if (status & KERNEL_PANIC) {
 574                 if (aac_src_restart_adapter(dev, aac_src_check_health(dev)))
 575                         goto error_iounmap;
 576                 ++restart;
 577         }
 578         /*
 579          *      Check to see if the board failed any self tests.
 580          */
 581         status = src_readl(dev, MUnit.OMR);
 582         if (status & SELF_TEST_FAILED) {
 583                 printk(KERN_ERR "%s%d: adapter self-test failed.\n",
 584                         dev->name, instance);
 585                 goto error_iounmap;
 586         }
 587         /*
 588          *      Check to see if the monitor panic'd while booting.
 589          */
 590         if (status & MONITOR_PANIC) {
 591                 printk(KERN_ERR "%s%d: adapter monitor panic.\n",
 592                         dev->name, instance);
 593                 goto error_iounmap;
 594         }
 595         start = jiffies;
 596         /*
 597          *      Wait for the adapter to be up and running. Wait up to 3 minutes
 598          */
 599         while (!((status = src_readl(dev, MUnit.OMR)) &
 600                 KERNEL_UP_AND_RUNNING)) {
 601                 if ((restart &&
 602                   (status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC))) ||
 603                   time_after(jiffies, start+HZ*startup_timeout)) {
 604                         printk(KERN_ERR "%s%d: adapter kernel failed to start, init status = %lx.\n",
 605                                         dev->name, instance, status);
 606                         goto error_iounmap;
 607                 }
 608                 if (!restart &&
 609                   ((status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC)) ||
 610                   time_after(jiffies, start + HZ *
 611                   ((startup_timeout > 60)
 612                     ? (startup_timeout - 60)
 613                     : (startup_timeout / 2))))) {
 614                         if (likely(!aac_src_restart_adapter(dev,
 615                             aac_src_check_health(dev))))
 616                                 start = jiffies;
 617                         ++restart;
 618                 }
 619                 msleep(1);
 620         }
 621         if (restart && aac_commit)
 622                 aac_commit = 1;
 623         /*
 624          *      Fill in the common function dispatch table.
 625          */
 626         dev->a_ops.adapter_interrupt = aac_src_interrupt_adapter;
 627         dev->a_ops.adapter_disable_int = aac_src_disable_interrupt;
 628         dev->a_ops.adapter_notify = aac_src_notify_adapter;
 629         dev->a_ops.adapter_sync_cmd = src_sync_cmd;
 630         dev->a_ops.adapter_check_health = aac_src_check_health;
 631         dev->a_ops.adapter_restart = aac_src_restart_adapter;
 632
 633         /*
 634          *      First clear out all interrupts.  Then enable the one's that we
 635          *      can handle.
 636          */
 637         aac_adapter_comm(dev, AAC_COMM_MESSAGE);
 638         aac_adapter_disable_int(dev);
 639         src_writel(dev, MUnit.ODR_C, 0xffffffff);
 640         aac_adapter_enable_int(dev);
 641
 642         if (aac_init_adapter(dev) == NULL)
 643                 goto error_iounmap;
 644         if (dev->comm_interface != AAC_COMM_MESSAGE_TYPE1)
 645                 goto error_iounmap;
 646
 647         dev->msi = aac_msi && !pci_enable_msi(dev->pdev);
 648
 649         if (request_irq(dev->pdev->irq, dev->a_ops.adapter_intr,
 650                         IRQF_SHARED|IRQF_DISABLED, "aacraid", dev) < 0) {
 651
 652                 if (dev->msi)
 653                         pci_disable_msi(dev->pdev);
 654
 655                 printk(KERN_ERR "%s%d: Interrupt unavailable.\n",
 656                         name, instance);
 657                 goto error_iounmap;
 658         }
 659         dev->dbg_base = pci_resource_start(dev->pdev, 2);
 660         dev->dbg_base_mapped = dev->regs.src.bar1;
 661         dev->dbg_size = AAC_MIN_SRC_BAR1_SIZE;
 662
 663         aac_adapter_enable_int(dev);
 664
 665         if (!dev->sync_mode) {
 666                 /*
 667                  * Tell the adapter that all is configured, and it can
 668                  * start accepting requests
 669                  */
 670                 aac_src_start_adapter(dev);
 671         }
 672         return 0;
 673
 674 error_iounmap:
 675
 676         return -1;
 677 }
 678
 679 /**
 680  *  aac_srcv_init       -       initialize an SRCv card
 681  *  @dev: device to configure
 682  *
 683  */
 684
 685 int aac_srcv_init(struct aac_dev *dev)
 686 {
 687         unsigned long start;
 688         unsigned long status;
 689         int restart = 0;
 690         int instance = dev->id;
 691         const char *name = dev->name;
 692
 693         dev->a_ops.adapter_ioremap = aac_srcv_ioremap;
 694         dev->a_ops.adapter_comm = aac_src_select_comm;
 695
 696         dev->base_size = AAC_MIN_SRCV_BAR0_SIZE;
 697         if (aac_adapter_ioremap(dev, dev->base_size)) {
 698                 printk(KERN_WARNING "%s: unable to map adapter.\n", name);
 699                 goto error_iounmap;
 700         }
 701
 702         /* Failure to reset here is an option ... */
 703         dev->a_ops.adapter_sync_cmd = src_sync_cmd;
 704         dev->a_ops.adapter_enable_int = aac_src_disable_interrupt;
 705         if ((aac_reset_devices || reset_devices) &&
 706                 !aac_src_restart_adapter(dev, 0))
 707                 ++restart;
 708         /*
 709          *      Check to see if flash update is running.
 710          *      Wait for the adapter to be up and running. Wait up to 5 minutes
 711          */
 712         status = src_readl(dev, MUnit.OMR);
 713         if (status & FLASH_UPD_PENDING) {
 714                 start = jiffies;
 715                 do {
 716                         status = src_readl(dev, MUnit.OMR);
 717                         if (time_after(jiffies, start+HZ*FWUPD_TIMEOUT)) {
 718                                 printk(KERN_ERR "%s%d: adapter flash update failed.\n",
 719                                         dev->name, instance);
 720                                 goto error_iounmap;
 721                         }
 722                 } while (!(status & FLASH_UPD_SUCCESS) &&
 723                          !(status & FLASH_UPD_FAILED));
 724                 /* Delay 10 seconds.
 725                  * Because right now FW is doing a soft reset,
 726                  * do not read scratch pad register at this time
 727                  */
 728                 ssleep(10);
 729         }
 730         /*
 731          *      Check to see if the board panic'd while booting.
 732          */
 733         status = src_readl(dev, MUnit.OMR);
 734         if (status & KERNEL_PANIC) {
 735                 if (aac_src_restart_adapter(dev, aac_src_check_health(dev)))
 736                         goto error_iounmap;
 737                 ++restart;
 738         }
 739         /*
 740          *      Check to see if the board failed any self tests.
 741          */
 742         status = src_readl(dev, MUnit.OMR);
 743         if (status & SELF_TEST_FAILED) {
 744                 printk(KERN_ERR "%s%d: adapter self-test failed.\n", dev->name, instance);
 745                 goto error_iounmap;
 746         }
 747         /*
 748          *      Check to see if the monitor panic'd while booting.
 749          */
 750         if (status & MONITOR_PANIC) {
 751                 printk(KERN_ERR "%s%d: adapter monitor panic.\n", dev->name, instance);
 752                 goto error_iounmap;
 753         }
 754         start = jiffies;
 755         /*
 756          *      Wait for the adapter to be up and running. Wait up to 3 minutes
 757          */
 758         while (!((status = src_readl(dev, MUnit.OMR)) &
 759                 KERNEL_UP_AND_RUNNING) ||
 760                 status == 0xffffffff) {
 761                 if ((restart &&
 762                   (status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC))) ||
 763                   time_after(jiffies, start+HZ*startup_timeout)) {
 764                         printk(KERN_ERR "%s%d: adapter kernel failed to start, init status = %lx.\n",
 765                                         dev->name, instance, status);
 766                         goto error_iounmap;
 767                 }
 768                 if (!restart &&
 769                   ((status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC)) ||
 770                   time_after(jiffies, start + HZ *
 771                   ((startup_timeout > 60)
 772                     ? (startup_timeout - 60)
 773                     : (startup_timeout / 2))))) {
 774                         if (likely(!aac_src_restart_adapter(dev, aac_src_check_health(dev))))
 775                                 start = jiffies;
 776                         ++restart;
 777                 }
 778                 msleep(1);
 779         }
 780         if (restart && aac_commit)
 781                 aac_commit = 1;
 782         /*
 783          *      Fill in the common function dispatch table.
 784          */
 785         dev->a_ops.adapter_interrupt = aac_src_interrupt_adapter;
 786         dev->a_ops.adapter_disable_int = aac_src_disable_interrupt;
 787         dev->a_ops.adapter_notify = aac_src_notify_adapter;
 788         dev->a_ops.adapter_sync_cmd = src_sync_cmd;
 789         dev->a_ops.adapter_check_health = aac_src_check_health;
 790         dev->a_ops.adapter_restart = aac_src_restart_adapter;
 791
 792         /*
 793          *      First clear out all interrupts.  Then enable the one's that we
 794          *      can handle.
 795          */
 796         aac_adapter_comm(dev, AAC_COMM_MESSAGE);
 797         aac_adapter_disable_int(dev);
 798         src_writel(dev, MUnit.ODR_C, 0xffffffff);
 799         aac_adapter_enable_int(dev);
 800
 801         if (aac_init_adapter(dev) == NULL)
 802                 goto error_iounmap;
 803         if (dev->comm_interface != AAC_COMM_MESSAGE_TYPE2)
 804                 goto error_iounmap;
 805         dev->msi = aac_msi && !pci_enable_msi(dev->pdev);
 806         if (request_irq(dev->pdev->irq, dev->a_ops.adapter_intr,
 807                 IRQF_SHARED|IRQF_DISABLED, "aacraid", dev) < 0) {
 808                 if (dev->msi)
 809                         pci_disable_msi(dev->pdev);
 810                 printk(KERN_ERR "%s%d: Interrupt unavailable.\n",
 811                         name, instance);
 812                 goto error_iounmap;
 813         }
 814         dev->dbg_base = dev->base_start;
 815         dev->dbg_base_mapped = dev->base;
 816         dev->dbg_size = dev->base_size;
 817
 818         aac_adapter_enable_int(dev);
 819
 820         if (!dev->sync_mode) {
 821                 /*
 822                  * Tell the adapter that all is configured, and it can
 823                  * start accepting requests
 824                  */
 825                 aac_src_start_adapter(dev);
 826         }
 827         return 0;
 828
 829 error_iounmap:
 830
 831         return -1;
 832 }
 833