Merge commit 'ed30f24e8d07d30aa3e69d1f508f4d7bd2e8ea14' of git://git.linaro.org/landi...
[firefly-linux-kernel-4.4.55.git] / drivers / net / wireless / iwlwifi / iwl-config.h
1 /******************************************************************************
2  *
3  * This file is provided under a dual BSD/GPLv2 license.  When using or
4  * redistributing this file, you may do so under either license.
5  *
6  * GPL LICENSE SUMMARY
7  *
8  * Copyright(c) 2007 - 2013 Intel Corporation. All rights reserved.
9  *
10  * This program is free software; you can redistribute it and/or modify
11  * it under the terms of version 2 of the GNU General Public License as
12  * published by the Free Software Foundation.
13  *
14  * This program is distributed in the hope that it will be useful, but
15  * WITHOUT ANY WARRANTY; without even the implied warranty of
16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
17  * General Public License for more details.
18  *
19  * You should have received a copy of the GNU General Public License
20  * along with this program; if not, write to the Free Software
21  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
22  * USA
23  *
24  * The full GNU General Public License is included in this distribution
25  * in the file called COPYING.
26  *
27  * Contact Information:
28  *  Intel Linux Wireless <ilw@linux.intel.com>
29  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
30  *
31  * BSD LICENSE
32  *
33  * Copyright(c) 2005 - 2013 Intel Corporation. All rights reserved.
34  * All rights reserved.
35  *
36  * Redistribution and use in source and binary forms, with or without
37  * modification, are permitted provided that the following conditions
38  * are met:
39  *
40  *  * Redistributions of source code must retain the above copyright
41  *    notice, this list of conditions and the following disclaimer.
42  *  * Redistributions in binary form must reproduce the above copyright
43  *    notice, this list of conditions and the following disclaimer in
44  *    the documentation and/or other materials provided with the
45  *    distribution.
46  *  * Neither the name Intel Corporation nor the names of its
47  *    contributors may be used to endorse or promote products derived
48  *    from this software without specific prior written permission.
49  *
50  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
51  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
52  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
53  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
54  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
55  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
56  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
57  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
58  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
59  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
60  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
61  *
62  *****************************************************************************/
63 #ifndef __IWL_CONFIG_H__
64 #define __IWL_CONFIG_H__
65
66 #include <linux/types.h>
67 #include <net/mac80211.h>
68
69
70 enum iwl_device_family {
71         IWL_DEVICE_FAMILY_UNDEFINED,
72         IWL_DEVICE_FAMILY_1000,
73         IWL_DEVICE_FAMILY_100,
74         IWL_DEVICE_FAMILY_2000,
75         IWL_DEVICE_FAMILY_2030,
76         IWL_DEVICE_FAMILY_105,
77         IWL_DEVICE_FAMILY_135,
78         IWL_DEVICE_FAMILY_5000,
79         IWL_DEVICE_FAMILY_5150,
80         IWL_DEVICE_FAMILY_6000,
81         IWL_DEVICE_FAMILY_6000i,
82         IWL_DEVICE_FAMILY_6005,
83         IWL_DEVICE_FAMILY_6030,
84         IWL_DEVICE_FAMILY_6050,
85         IWL_DEVICE_FAMILY_6150,
86         IWL_DEVICE_FAMILY_7000,
87 };
88
89 /*
90  * LED mode
91  *    IWL_LED_DEFAULT:  use device default
92  *    IWL_LED_RF_STATE: turn LED on/off based on RF state
93  *                      LED ON  = RF ON
94  *                      LED OFF = RF OFF
95  *    IWL_LED_BLINK:    adjust led blink rate based on blink table
96  *    IWL_LED_DISABLE:  led disabled
97  */
98 enum iwl_led_mode {
99         IWL_LED_DEFAULT,
100         IWL_LED_RF_STATE,
101         IWL_LED_BLINK,
102         IWL_LED_DISABLE,
103 };
104
105 /*
106  * This is the threshold value of plcp error rate per 100mSecs.  It is
107  * used to set and check for the validity of plcp_delta.
108  */
109 #define IWL_MAX_PLCP_ERR_THRESHOLD_MIN          1
110 #define IWL_MAX_PLCP_ERR_THRESHOLD_DEF          50
111 #define IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF     100
112 #define IWL_MAX_PLCP_ERR_EXT_LONG_THRESHOLD_DEF 200
113 #define IWL_MAX_PLCP_ERR_THRESHOLD_MAX          255
114 #define IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE      0
115
116 /* TX queue watchdog timeouts in mSecs */
117 #define IWL_WATCHDOG_DISABLED   0
118 #define IWL_DEF_WD_TIMEOUT      2000
119 #define IWL_LONG_WD_TIMEOUT     10000
120 #define IWL_MAX_WD_TIMEOUT      120000
121
122 /* Antenna presence definitions */
123 #define ANT_NONE        0x0
124 #define ANT_A           BIT(0)
125 #define ANT_B           BIT(1)
126 #define ANT_C           BIT(2)
127 #define ANT_AB          (ANT_A | ANT_B)
128 #define ANT_AC          (ANT_A | ANT_C)
129 #define ANT_BC          (ANT_B | ANT_C)
130 #define ANT_ABC         (ANT_A | ANT_B | ANT_C)
131
132
133 /*
134  * @max_ll_items: max number of OTP blocks
135  * @shadow_ram_support: shadow support for OTP memory
136  * @led_compensation: compensate on the led on/off time per HW according
137  *      to the deviation to achieve the desired led frequency.
138  *      The detail algorithm is described in iwl-led.c
139  * @chain_noise_num_beacons: number of beacons used to compute chain noise
140  * @adv_thermal_throttle: support advance thermal throttle
141  * @support_ct_kill_exit: support ct kill exit condition
142  * @plcp_delta_threshold: plcp error rate threshold used to trigger
143  *      radio tuning when there is a high receiving plcp error rate
144  * @chain_noise_scale: default chain noise scale used for gain computation
145  * @wd_timeout: TX queues watchdog timeout
146  * @max_event_log_size: size of event log buffer size for ucode event logging
147  * @shadow_reg_enable: HW shadow register support
148  * @hd_v2: v2 of enhanced sensitivity value, used for 2000 series and up
149  * @no_idle_support: do not support idle mode
150  */
151 struct iwl_base_params {
152         int eeprom_size;
153         int num_of_queues;      /* def: HW dependent */
154         /* for iwl_pcie_apm_init() */
155         u32 pll_cfg_val;
156
157         const u16 max_ll_items;
158         const bool shadow_ram_support;
159         u16 led_compensation;
160         bool adv_thermal_throttle;
161         bool support_ct_kill_exit;
162         u8 plcp_delta_threshold;
163         s32 chain_noise_scale;
164         unsigned int wd_timeout;
165         u32 max_event_log_size;
166         const bool shadow_reg_enable;
167         const bool hd_v2;
168         const bool no_idle_support;
169 };
170
171 /*
172  * @advanced_bt_coexist: support advanced bt coexist
173  * @bt_init_traffic_load: specify initial bt traffic load
174  * @bt_prio_boost: default bt priority boost value
175  * @agg_time_limit: maximum number of uSec in aggregation
176  * @bt_sco_disable: uCode should not response to BT in SCO/ESCO mode
177  */
178 struct iwl_bt_params {
179         bool advanced_bt_coexist;
180         u8 bt_init_traffic_load;
181         u32 bt_prio_boost;
182         u16 agg_time_limit;
183         bool bt_sco_disable;
184         bool bt_session_2;
185 };
186
187 /*
188  * @use_rts_for_aggregation: use rts/cts protection for HT traffic
189  * @ht40_bands: bitmap of bands (using %IEEE80211_BAND_*) that support HT40
190  */
191 struct iwl_ht_params {
192         enum ieee80211_smps_mode smps_mode;
193         const bool ht_greenfield_support; /* if used set to true */
194         bool use_rts_for_aggregation;
195         u8 ht40_bands;
196 };
197
198 /*
199  * information on how to parse the EEPROM
200  */
201 #define EEPROM_REG_BAND_1_CHANNELS              0x08
202 #define EEPROM_REG_BAND_2_CHANNELS              0x26
203 #define EEPROM_REG_BAND_3_CHANNELS              0x42
204 #define EEPROM_REG_BAND_4_CHANNELS              0x5C
205 #define EEPROM_REG_BAND_5_CHANNELS              0x74
206 #define EEPROM_REG_BAND_24_HT40_CHANNELS        0x82
207 #define EEPROM_REG_BAND_52_HT40_CHANNELS        0x92
208 #define EEPROM_6000_REG_BAND_24_HT40_CHANNELS   0x80
209 #define EEPROM_REGULATORY_BAND_NO_HT40          0
210
211 struct iwl_eeprom_params {
212         const u8 regulatory_bands[7];
213         bool enhanced_txpower;
214 };
215
216 /**
217  * struct iwl_cfg
218  * @name: Offical name of the device
219  * @fw_name_pre: Firmware filename prefix. The api version and extension
220  *      (.ucode) will be added to filename before loading from disk. The
221  *      filename is constructed as fw_name_pre<api>.ucode.
222  * @ucode_api_max: Highest version of uCode API supported by driver.
223  * @ucode_api_ok: oldest version of the uCode API that is OK to load
224  *      without a warning, for use in transitions
225  * @ucode_api_min: Lowest version of uCode API supported by driver.
226  * @max_inst_size: The maximal length of the fw inst section
227  * @max_data_size: The maximal length of the fw data section
228  * @valid_tx_ant: valid transmit antenna
229  * @valid_rx_ant: valid receive antenna
230  * @nvm_ver: NVM version
231  * @nvm_calib_ver: NVM calibration version
232  * @lib: pointer to the lib ops
233  * @base_params: pointer to basic parameters
234  * @ht_params: point to ht patameters
235  * @bt_params: pointer to bt parameters
236  * @need_temp_offset_calib: need to perform temperature offset calibration
237  * @no_xtal_calib: some devices do not need crystal calibration data,
238  *      don't send it to those
239  * @led_mode: 0=blinking, 1=On(RF On)/Off(RF Off)
240  * @adv_pm: advance power management
241  * @rx_with_siso_diversity: 1x1 device with rx antenna diversity
242  * @internal_wimax_coex: internal wifi/wimax combo device
243  * @temp_offset_v2: support v2 of temperature offset calibration
244  *
245  * We enable the driver to be backward compatible wrt. hardware features.
246  * API differences in uCode shouldn't be handled here but through TLVs
247  * and/or the uCode API version instead.
248  */
249 struct iwl_cfg {
250         /* params specific to an individual device within a device family */
251         const char *name;
252         const char *fw_name_pre;
253         const unsigned int ucode_api_max;
254         const unsigned int ucode_api_ok;
255         const unsigned int ucode_api_min;
256         const enum iwl_device_family device_family;
257         const u32 max_data_size;
258         const u32 max_inst_size;
259         u8   valid_tx_ant;
260         u8   valid_rx_ant;
261         u16  nvm_ver;
262         u16  nvm_calib_ver;
263         /* params not likely to change within a device family */
264         const struct iwl_base_params *base_params;
265         /* params likely to change within a device family */
266         const struct iwl_ht_params *ht_params;
267         const struct iwl_bt_params *bt_params;
268         const struct iwl_eeprom_params *eeprom_params;
269         const bool need_temp_offset_calib; /* if used set to true */
270         const bool no_xtal_calib;
271         enum iwl_led_mode led_mode;
272         const bool adv_pm;
273         const bool rx_with_siso_diversity;
274         const bool internal_wimax_coex;
275         const bool temp_offset_v2;
276 };
277
278 /*
279  * This list declares the config structures for all devices.
280  */
281 extern const struct iwl_cfg iwl5300_agn_cfg;
282 extern const struct iwl_cfg iwl5100_agn_cfg;
283 extern const struct iwl_cfg iwl5350_agn_cfg;
284 extern const struct iwl_cfg iwl5100_bgn_cfg;
285 extern const struct iwl_cfg iwl5100_abg_cfg;
286 extern const struct iwl_cfg iwl5150_agn_cfg;
287 extern const struct iwl_cfg iwl5150_abg_cfg;
288 extern const struct iwl_cfg iwl6005_2agn_cfg;
289 extern const struct iwl_cfg iwl6005_2abg_cfg;
290 extern const struct iwl_cfg iwl6005_2bg_cfg;
291 extern const struct iwl_cfg iwl6005_2agn_sff_cfg;
292 extern const struct iwl_cfg iwl6005_2agn_d_cfg;
293 extern const struct iwl_cfg iwl6005_2agn_mow1_cfg;
294 extern const struct iwl_cfg iwl6005_2agn_mow2_cfg;
295 extern const struct iwl_cfg iwl1030_bgn_cfg;
296 extern const struct iwl_cfg iwl1030_bg_cfg;
297 extern const struct iwl_cfg iwl6030_2agn_cfg;
298 extern const struct iwl_cfg iwl6030_2abg_cfg;
299 extern const struct iwl_cfg iwl6030_2bgn_cfg;
300 extern const struct iwl_cfg iwl6030_2bg_cfg;
301 extern const struct iwl_cfg iwl6000i_2agn_cfg;
302 extern const struct iwl_cfg iwl6000i_2abg_cfg;
303 extern const struct iwl_cfg iwl6000i_2bg_cfg;
304 extern const struct iwl_cfg iwl6000_3agn_cfg;
305 extern const struct iwl_cfg iwl6050_2agn_cfg;
306 extern const struct iwl_cfg iwl6050_2abg_cfg;
307 extern const struct iwl_cfg iwl6150_bgn_cfg;
308 extern const struct iwl_cfg iwl6150_bg_cfg;
309 extern const struct iwl_cfg iwl1000_bgn_cfg;
310 extern const struct iwl_cfg iwl1000_bg_cfg;
311 extern const struct iwl_cfg iwl100_bgn_cfg;
312 extern const struct iwl_cfg iwl100_bg_cfg;
313 extern const struct iwl_cfg iwl130_bgn_cfg;
314 extern const struct iwl_cfg iwl130_bg_cfg;
315 extern const struct iwl_cfg iwl2000_2bgn_cfg;
316 extern const struct iwl_cfg iwl2000_2bgn_d_cfg;
317 extern const struct iwl_cfg iwl2030_2bgn_cfg;
318 extern const struct iwl_cfg iwl6035_2agn_cfg;
319 extern const struct iwl_cfg iwl105_bgn_cfg;
320 extern const struct iwl_cfg iwl105_bgn_d_cfg;
321 extern const struct iwl_cfg iwl135_bgn_cfg;
322 extern const struct iwl_cfg iwl7260_2ac_cfg;
323 extern const struct iwl_cfg iwl3160_ac_cfg;
324
325 #endif /* __IWL_CONFIG_H__ */