drivers/media/video/em28xx/em28xx-cards.c

   1 /*
   2    em28xx-cards.c - driver for Empia EM2800/EM2820/2840 USB
   3                     video capture devices
   4
   5    Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
   6                       Markus Rechberger <mrechberger@gmail.com>
   7                       Mauro Carvalho Chehab <mchehab@infradead.org>
   8                       Sascha Sommer <saschasommer@freenet.de>
   9
  10    This program is free software; you can redistribute it and/or modify
  11    it under the terms of the GNU General Public License as published by
  12    the Free Software Foundation; either version 2 of the License, or
  13    (at your option) any later version.
  14
  15    This program is distributed in the hope that it will be useful,
  16    but WITHOUT ANY WARRANTY; without even the implied warranty of
  17    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18    GNU General Public License for more details.
  19
  20    You should have received a copy of the GNU General Public License
  21    along with this program; if not, write to the Free Software
  22    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  23  */
  24
  25 #include <linux/init.h>
  26 #include <linux/module.h>
  27 #include <linux/slab.h>
  28 #include <linux/delay.h>
  29 #include <linux/i2c.h>
  30 #include <linux/usb.h>
  31 #include <media/tuner.h>
  32 #include <media/msp3400.h>
  33 #include <media/saa7115.h>
  34 #include <media/tvp5150.h>
  35 #include <media/tvaudio.h>
  36 #include <media/mt9v011.h>
  37 #include <media/i2c-addr.h>
  38 #include <media/tveeprom.h>
  39 #include <media/v4l2-common.h>
  40 #include <media/v4l2-chip-ident.h>
  41
  42 #include "em28xx.h"
  43
  44 #define DRIVER_NAME         "em28xx"
  45
  46 static int tuner = -1;
  47 module_param(tuner, int, 0444);
  48 MODULE_PARM_DESC(tuner, "tuner type");
  49
  50 static unsigned int disable_ir;
  51 module_param(disable_ir, int, 0444);
  52 MODULE_PARM_DESC(disable_ir, "disable infrared remote support");
  53
  54 static unsigned int disable_usb_speed_check;
  55 module_param(disable_usb_speed_check, int, 0444);
  56 MODULE_PARM_DESC(disable_usb_speed_check,
  57                  "override min bandwidth requirement of 480M bps");
  58
  59 static unsigned int card[]     = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET };
  60 module_param_array(card,  int, NULL, 0444);
  61 MODULE_PARM_DESC(card,     "card type");
  62
  63 /* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS - 1 */
  64 static unsigned long em28xx_devused;
  65
  66 struct em28xx_hash_table {
  67         unsigned long hash;
  68         unsigned int  model;
  69         unsigned int  tuner;
  70 };
  71
  72 static void em28xx_pre_card_setup(struct em28xx *dev);
  73
  74 /*
  75  *  Reset sequences for analog/digital modes
  76  */
  77
  78 /* Reset for the most [analog] boards */
  79 static struct em28xx_reg_seq default_analog[] = {
  80         {EM28XX_R08_GPIO,       0x6d,   ~EM_GPIO_4,     10},
  81         {       -1,             -1,     -1,             -1},
  82 };
  83
  84 /* Reset for the most [digital] boards */
  85 static struct em28xx_reg_seq default_digital[] = {
  86         {EM28XX_R08_GPIO,       0x6e,   ~EM_GPIO_4,     10},
  87         {       -1,             -1,     -1,             -1},
  88 };
  89
  90 /* Board Hauppauge WinTV HVR 900 analog */
  91 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = {
  92         {EM28XX_R08_GPIO,       0x2d,   ~EM_GPIO_4,     10},
  93         {0x05,                  0xff,   0x10,           10},
  94         {  -1,                  -1,     -1,             -1},
  95 };
  96
  97 /* Board Hauppauge WinTV HVR 900 digital */
  98 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = {
  99         {EM28XX_R08_GPIO,       0x2e,   ~EM_GPIO_4,     10},
 100         {EM2880_R04_GPO,        0x04,   0x0f,           10},
 101         {EM2880_R04_GPO,        0x0c,   0x0f,           10},
 102         { -1,                   -1,     -1,             -1},
 103 };
 104
 105 /* Board Hauppauge WinTV HVR 900 (R2) digital */
 106 static struct em28xx_reg_seq hauppauge_wintv_hvr_900R2_digital[] = {
 107         {EM28XX_R08_GPIO,       0x2e,   ~EM_GPIO_4,     10},
 108         {EM2880_R04_GPO,        0x0c,   0x0f,           10},
 109         { -1,                   -1,     -1,             -1},
 110 };
 111
 112 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
 113 static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = {
 114         {EM28XX_R08_GPIO,       0x69,   ~EM_GPIO_4,      10},
 115         {       -1,             -1,     -1,              -1},
 116 };
 117
 118 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
 119
 120 /* Board  - EM2870 Kworld 355u
 121    Analog - No input analog */
 122
 123 /* Board - EM2882 Kworld 315U digital */
 124 static struct em28xx_reg_seq em2882_kworld_315u_digital[] = {
 125         {EM28XX_R08_GPIO,       0xff,   0xff,           10},
 126         {EM28XX_R08_GPIO,       0xfe,   0xff,           10},
 127         {EM2880_R04_GPO,        0x04,   0xff,           10},
 128         {EM2880_R04_GPO,        0x0c,   0xff,           10},
 129         {EM28XX_R08_GPIO,       0x7e,   0xff,           10},
 130         {  -1,                  -1,     -1,             -1},
 131 };
 132
 133 static struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = {
 134         {EM2880_R04_GPO,        0x08,   0xff,           10},
 135         {EM2880_R04_GPO,        0x0c,   0xff,           10},
 136         {EM2880_R04_GPO,        0x08,   0xff,           10},
 137         {EM2880_R04_GPO,        0x0c,   0xff,           10},
 138         {  -1,                  -1,     -1,             -1},
 139 };
 140
 141 static struct em28xx_reg_seq kworld_330u_analog[] = {
 142         {EM28XX_R08_GPIO,       0x6d,   ~EM_GPIO_4,     10},
 143         {EM2880_R04_GPO,        0x00,   0xff,           10},
 144         { -1,                   -1,     -1,             -1},
 145 };
 146
 147 static struct em28xx_reg_seq kworld_330u_digital[] = {
 148         {EM28XX_R08_GPIO,       0x6e,   ~EM_GPIO_4,     10},
 149         {EM2880_R04_GPO,        0x08,   0xff,           10},
 150         { -1,                   -1,     -1,             -1},
 151 };
 152
 153 /* Evga inDtube
 154    GPIO0 - Enable digital power (s5h1409) - low to enable
 155    GPIO1 - Enable analog power (tvp5150/emp202) - low to enable
 156    GPIO4 - xc3028 reset
 157    GOP3  - s5h1409 reset
 158  */
 159 static struct em28xx_reg_seq evga_indtube_analog[] = {
 160         {EM28XX_R08_GPIO,       0x79,   0xff,           60},
 161         {       -1,             -1,     -1,             -1},
 162 };
 163
 164 static struct em28xx_reg_seq evga_indtube_digital[] = {
 165         {EM28XX_R08_GPIO,       0x7a,   0xff,            1},
 166         {EM2880_R04_GPO,        0x04,   0xff,           10},
 167         {EM2880_R04_GPO,        0x0c,   0xff,            1},
 168         { -1,                   -1,     -1,             -1},
 169 };
 170
 171 /*
 172  * KWorld PlusTV 340U and UB435-Q (ATSC) GPIOs map:
 173  * EM_GPIO_0 - currently unknown
 174  * EM_GPIO_1 - LED disable/enable (1 = off, 0 = on)
 175  * EM_GPIO_2 - currently unknown
 176  * EM_GPIO_3 - currently unknown
 177  * EM_GPIO_4 - TDA18271HD/C1 tuner (1 = active, 0 = in reset)
 178  * EM_GPIO_5 - LGDT3304 ATSC/QAM demod (1 = active, 0 = in reset)
 179  * EM_GPIO_6 - currently unknown
 180  * EM_GPIO_7 - currently unknown
 181  */
 182 static struct em28xx_reg_seq kworld_a340_digital[] = {
 183         {EM28XX_R08_GPIO,       0x6d,           ~EM_GPIO_4,     10},
 184         { -1,                   -1,             -1,             -1},
 185 };
 186
 187 /* Pinnacle Hybrid Pro eb1a:2881 */
 188 static struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = {
 189         {EM28XX_R08_GPIO,       0xfd,   ~EM_GPIO_4,     10},
 190         {       -1,             -1,     -1,             -1},
 191 };
 192
 193 static struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = {
 194         {EM28XX_R08_GPIO,       0x6e,   ~EM_GPIO_4,     10},
 195         {EM2880_R04_GPO,        0x04,   0xff,          100},/* zl10353 reset */
 196         {EM2880_R04_GPO,        0x0c,   0xff,            1},
 197         {       -1,             -1,     -1,             -1},
 198 };
 199
 200 static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_analog[] = {
 201         {EM28XX_R08_GPIO,       0x6d,   ~EM_GPIO_4,     10},
 202         {EM2880_R04_GPO,        0x00,   0xff,           10},
 203         { -1,                   -1,     -1,             -1},
 204 };
 205
 206 static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_digital[] = {
 207         {EM28XX_R08_GPIO,       0x6e,   ~EM_GPIO_4,     10},
 208         {EM2880_R04_GPO,        0x08,   0xff,           10},
 209         { -1,                   -1,     -1,             -1},
 210 };
 211
 212 /* eb1a:2868 Reddo DVB-C USB TV Box
 213    GPIO4 - CU1216L NIM
 214    Other GPIOs seems to be don't care. */
 215 static struct em28xx_reg_seq reddo_dvb_c_usb_box[] = {
 216         {EM28XX_R08_GPIO,       0xfe,   0xff,           10},
 217         {EM28XX_R08_GPIO,       0xde,   0xff,           10},
 218         {EM28XX_R08_GPIO,       0xfe,   0xff,           10},
 219         {EM28XX_R08_GPIO,       0xff,   0xff,           10},
 220         {EM28XX_R08_GPIO,       0x7f,   0xff,           10},
 221         {EM28XX_R08_GPIO,       0x6f,   0xff,           10},
 222         {EM28XX_R08_GPIO,       0xff,   0xff,           10},
 223         {-1,                    -1,     -1,             -1},
 224 };
 225
 226 /* Callback for the most boards */
 227 static struct em28xx_reg_seq default_tuner_gpio[] = {
 228         {EM28XX_R08_GPIO,       EM_GPIO_4,      EM_GPIO_4,      10},
 229         {EM28XX_R08_GPIO,       0,              EM_GPIO_4,      10},
 230         {EM28XX_R08_GPIO,       EM_GPIO_4,      EM_GPIO_4,      10},
 231         {  -1,                  -1,             -1,             -1},
 232 };
 233
 234 /* Mute/unmute */
 235 static struct em28xx_reg_seq compro_unmute_tv_gpio[] = {
 236         {EM28XX_R08_GPIO,       5,              7,              10},
 237         {  -1,                  -1,             -1,             -1},
 238 };
 239
 240 static struct em28xx_reg_seq compro_unmute_svid_gpio[] = {
 241         {EM28XX_R08_GPIO,       4,              7,              10},
 242         {  -1,                  -1,             -1,             -1},
 243 };
 244
 245 static struct em28xx_reg_seq compro_mute_gpio[] = {
 246         {EM28XX_R08_GPIO,       6,              7,              10},
 247         {  -1,                  -1,             -1,             -1},
 248 };
 249
 250 /* Terratec AV350 */
 251 static struct em28xx_reg_seq terratec_av350_mute_gpio[] = {
 252         {EM28XX_R08_GPIO,       0xff,   0x7f,           10},
 253         {       -1,             -1,     -1,             -1},
 254 };
 255
 256 static struct em28xx_reg_seq terratec_av350_unmute_gpio[] = {
 257         {EM28XX_R08_GPIO,       0xff,   0xff,           10},
 258         {       -1,             -1,     -1,             -1},
 259 };
 260
 261 static struct em28xx_reg_seq silvercrest_reg_seq[] = {
 262         {EM28XX_R08_GPIO,       0xff,   0xff,           10},
 263         {EM28XX_R08_GPIO,       0x01,   0xf7,           10},
 264         {       -1,             -1,     -1,             -1},
 265 };
 266
 267 static struct em28xx_reg_seq vc211a_enable[] = {
 268         {EM28XX_R08_GPIO,       0xff,   0x07,           10},
 269         {EM28XX_R08_GPIO,       0xff,   0x0f,           10},
 270         {EM28XX_R08_GPIO,       0xff,   0x0b,           10},
 271         {       -1,             -1,     -1,             -1},
 272 };
 273
 274 static struct em28xx_reg_seq dikom_dk300_digital[] = {
 275         {EM28XX_R08_GPIO,       0x6e,   ~EM_GPIO_4,     10},
 276         {EM2880_R04_GPO,        0x08,   0xff,           10},
 277         { -1,                   -1,     -1,             -1},
 278 };
 279
 280
 281 /* Reset for the most [digital] boards */
 282 static struct em28xx_reg_seq leadership_digital[] = {
 283         {EM2874_R80_GPIO,       0x70,   0xff,   10},
 284         {       -1,             -1,     -1,     -1},
 285 };
 286
 287 static struct em28xx_reg_seq leadership_reset[] = {
 288         {EM2874_R80_GPIO,       0xf0,   0xff,   10},
 289         {EM2874_R80_GPIO,       0xb0,   0xff,   10},
 290         {EM2874_R80_GPIO,       0xf0,   0xff,   10},
 291         {       -1,             -1,     -1,     -1},
 292 };
 293
 294 /* 2013:024f PCTV nanoStick T2 290e
 295  * GPIO_6 - demod reset
 296  * GPIO_7 - LED
 297  */
 298 static struct em28xx_reg_seq pctv_290e[] = {
 299         {EM2874_R80_GPIO,       0x00,   0xff,           80},
 300         {EM2874_R80_GPIO,       0x40,   0xff,           80}, /* GPIO_6 = 1 */
 301         {EM2874_R80_GPIO,       0xc0,   0xff,           80}, /* GPIO_7 = 1 */
 302         {-1,                    -1,     -1,             -1},
 303 };
 304
 305 #if 0
 306 static struct em28xx_reg_seq terratec_h5_gpio[] = {
 307         {EM28XX_R08_GPIO,       0xff,   0xff,   10},
 308         {EM2874_R80_GPIO,       0xf6,   0xff,   100},
 309         {EM2874_R80_GPIO,       0xf2,   0xff,   50},
 310         {EM2874_R80_GPIO,       0xf6,   0xff,   50},
 311         { -1,                   -1,     -1,     -1},
 312 };
 313
 314 static struct em28xx_reg_seq terratec_h5_digital[] = {
 315         {EM2874_R80_GPIO,       0xf6,   0xff,   10},
 316         {EM2874_R80_GPIO,       0xe6,   0xff,   100},
 317         {EM2874_R80_GPIO,       0xa6,   0xff,   10},
 318         { -1,                   -1,     -1,     -1},
 319 };
 320 #endif
 321
 322 /* 2013:024f PCTV DVB-S2 Stick 460e
 323  * GPIO_0 - POWER_ON
 324  * GPIO_1 - BOOST
 325  * GPIO_2 - VUV_LNB (red LED)
 326  * GPIO_3 - EXT_12V
 327  * GPIO_4 - INT_DEM (DEMOD GPIO_0)
 328  * GPIO_5 - INT_LNB
 329  * GPIO_6 - RESET_DEM
 330  * GPIO_7 - LED (green LED)
 331  */
 332 static struct em28xx_reg_seq pctv_460e[] = {
 333         {EM2874_R80_GPIO, 0x01, 0xff,  50},
 334         {0x0d,            0xff, 0xff,  50},
 335         {EM2874_R80_GPIO, 0x41, 0xff,  50}, /* GPIO_6=1 */
 336         {0x0d,            0x42, 0xff,  50},
 337         {EM2874_R80_GPIO, 0x61, 0xff,  50}, /* GPIO_5=1 */
 338         {             -1,   -1,   -1,  -1},
 339 };
 340
 341 #if 0
 342 static struct em28xx_reg_seq hauppauge_930c_gpio[] = {
 343         {EM2874_R80_GPIO,       0x6f,   0xff,   10},
 344         {EM2874_R80_GPIO,       0x4f,   0xff,   10}, /* xc5000 reset */
 345         {EM2874_R80_GPIO,       0x6f,   0xff,   10},
 346         {EM2874_R80_GPIO,       0x4f,   0xff,   10},
 347         { -1,                   -1,     -1,     -1},
 348 };
 349
 350 static struct em28xx_reg_seq hauppauge_930c_digital[] = {
 351         {EM2874_R80_GPIO,       0xf6,   0xff,   10},
 352         {EM2874_R80_GPIO,       0xe6,   0xff,   100},
 353         {EM2874_R80_GPIO,       0xa6,   0xff,   10},
 354         { -1,                   -1,     -1,     -1},
 355 };
 356 #endif
 357
 358 /* 1b80:e425 MaxMedia UB425-TC
 359  * GPIO_6 - demod reset, 0=active
 360  * GPIO_7 - LED, 0=active
 361  */
 362 static struct em28xx_reg_seq maxmedia_ub425_tc[] = {
 363         {EM2874_R80_GPIO,  0x83,  0xff,  100},
 364         {EM2874_R80_GPIO,  0xc3,  0xff,  100}, /* GPIO_6 = 1 */
 365         {EM2874_R80_GPIO,  0x43,  0xff,  000}, /* GPIO_7 = 0 */
 366         {-1,                 -1,    -1,   -1},
 367 };
 368
 369 /* 2304:0242 PCTV QuatroStick (510e)
 370  * GPIO_2: decoder reset, 0=active
 371  * GPIO_4: decoder suspend, 0=active
 372  * GPIO_6: demod reset, 0=active
 373  * GPIO_7: LED, 1=active
 374  */
 375 static struct em28xx_reg_seq pctv_510e[] = {
 376         {EM2874_R80_GPIO, 0x10, 0xff, 100},
 377         {EM2874_R80_GPIO, 0x14, 0xff, 100}, /* GPIO_2 = 1 */
 378         {EM2874_R80_GPIO, 0x54, 0xff, 050}, /* GPIO_6 = 1 */
 379         {             -1,   -1,   -1,  -1},
 380 };
 381
 382 /* 2013:0251 PCTV QuatroStick nano (520e)
 383  * GPIO_2: decoder reset, 0=active
 384  * GPIO_4: decoder suspend, 0=active
 385  * GPIO_6: demod reset, 0=active
 386  * GPIO_7: LED, 1=active
 387  */
 388 static struct em28xx_reg_seq pctv_520e[] = {
 389         {EM2874_R80_GPIO, 0x10, 0xff, 100},
 390         {EM2874_R80_GPIO, 0x14, 0xff, 100}, /* GPIO_2 = 1 */
 391         {EM2874_R80_GPIO, 0x54, 0xff, 050}, /* GPIO_6 = 1 */
 392         {EM2874_R80_GPIO, 0xd4, 0xff, 000}, /* GPIO_7 = 1 */
 393         {             -1,   -1,   -1,  -1},
 394 };
 395
 396 /*
 397  *  Board definitions
 398  */
 399 struct em28xx_board em28xx_boards[] = {
 400         [EM2750_BOARD_UNKNOWN] = {
 401                 .name          = "EM2710/EM2750/EM2751 webcam grabber",
 402                 .xclk          = EM28XX_XCLK_FREQUENCY_20MHZ,
 403                 .tuner_type    = TUNER_ABSENT,
 404                 .is_webcam     = 1,
 405                 .input         = { {
 406                         .type     = EM28XX_VMUX_COMPOSITE1,
 407                         .vmux     = 0,
 408                         .amux     = EM28XX_AMUX_VIDEO,
 409                         .gpio     = silvercrest_reg_seq,
 410                 } },
 411         },
 412         [EM2800_BOARD_UNKNOWN] = {
 413                 .name         = "Unknown EM2800 video grabber",
 414                 .is_em2800    = 1,
 415                 .tda9887_conf = TDA9887_PRESENT,
 416                 .decoder      = EM28XX_SAA711X,
 417                 .tuner_type   = TUNER_ABSENT,
 418                 .input        = { {
 419                         .type     = EM28XX_VMUX_COMPOSITE1,
 420                         .vmux     = SAA7115_COMPOSITE0,
 421                         .amux     = EM28XX_AMUX_LINE_IN,
 422                 }, {
 423                         .type     = EM28XX_VMUX_SVIDEO,
 424                         .vmux     = SAA7115_SVIDEO3,
 425                         .amux     = EM28XX_AMUX_LINE_IN,
 426                 } },
 427         },
 428         [EM2820_BOARD_UNKNOWN] = {
 429                 .name          = "Unknown EM2750/28xx video grabber",
 430                 .tuner_type    = TUNER_ABSENT,
 431                 .is_webcam     = 1,     /* To enable sensor probe */
 432         },
 433         [EM2750_BOARD_DLCW_130] = {
 434                 /* Beijing Huaqi Information Digital Technology Co., Ltd */
 435                 .name          = "Huaqi DLCW-130",
 436                 .valid         = EM28XX_BOARD_NOT_VALIDATED,
 437                 .xclk          = EM28XX_XCLK_FREQUENCY_48MHZ,
 438                 .tuner_type    = TUNER_ABSENT,
 439                 .is_webcam     = 1,
 440                 .input         = { {
 441                         .type     = EM28XX_VMUX_COMPOSITE1,
 442                         .vmux     = 0,
 443                         .amux     = EM28XX_AMUX_VIDEO,
 444                 } },
 445         },
 446         [EM2820_BOARD_KWORLD_PVRTV2800RF] = {
 447                 .name         = "Kworld PVR TV 2800 RF",
 448                 .tuner_type   = TUNER_TEMIC_PAL,
 449                 .tda9887_conf = TDA9887_PRESENT,
 450                 .decoder      = EM28XX_SAA711X,
 451                 .input        = { {
 452                         .type     = EM28XX_VMUX_COMPOSITE1,
 453                         .vmux     = SAA7115_COMPOSITE0,
 454                         .amux     = EM28XX_AMUX_LINE_IN,
 455                 }, {
 456                         .type     = EM28XX_VMUX_SVIDEO,
 457                         .vmux     = SAA7115_SVIDEO3,
 458                         .amux     = EM28XX_AMUX_LINE_IN,
 459                 } },
 460         },
 461         [EM2820_BOARD_GADMEI_TVR200] = {
 462                 .name         = "Gadmei TVR200",
 463                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 464                 .tda9887_conf = TDA9887_PRESENT,
 465                 .decoder      = EM28XX_SAA711X,
 466                 .input        = { {
 467                         .type     = EM28XX_VMUX_TELEVISION,
 468                         .vmux     = SAA7115_COMPOSITE2,
 469                         .amux     = EM28XX_AMUX_LINE_IN,
 470                 }, {
 471                         .type     = EM28XX_VMUX_COMPOSITE1,
 472                         .vmux     = SAA7115_COMPOSITE0,
 473                         .amux     = EM28XX_AMUX_LINE_IN,
 474                 }, {
 475                         .type     = EM28XX_VMUX_SVIDEO,
 476                         .vmux     = SAA7115_SVIDEO3,
 477                         .amux     = EM28XX_AMUX_LINE_IN,
 478                 } },
 479         },
 480         [EM2820_BOARD_TERRATEC_CINERGY_250] = {
 481                 .name         = "Terratec Cinergy 250 USB",
 482                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 483                 .has_ir_i2c   = 1,
 484                 .tda9887_conf = TDA9887_PRESENT,
 485                 .decoder      = EM28XX_SAA711X,
 486                 .input        = { {
 487                         .type     = EM28XX_VMUX_TELEVISION,
 488                         .vmux     = SAA7115_COMPOSITE2,
 489                         .amux     = EM28XX_AMUX_LINE_IN,
 490                 }, {
 491                         .type     = EM28XX_VMUX_COMPOSITE1,
 492                         .vmux     = SAA7115_COMPOSITE0,
 493                         .amux     = EM28XX_AMUX_LINE_IN,
 494                 }, {
 495                         .type     = EM28XX_VMUX_SVIDEO,
 496                         .vmux     = SAA7115_SVIDEO3,
 497                         .amux     = EM28XX_AMUX_LINE_IN,
 498                 } },
 499         },
 500         [EM2820_BOARD_PINNACLE_USB_2] = {
 501                 .name         = "Pinnacle PCTV USB 2",
 502                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 503                 .has_ir_i2c   = 1,
 504                 .tda9887_conf = TDA9887_PRESENT,
 505                 .decoder      = EM28XX_SAA711X,
 506                 .input        = { {
 507                         .type     = EM28XX_VMUX_TELEVISION,
 508                         .vmux     = SAA7115_COMPOSITE2,
 509                         .amux     = EM28XX_AMUX_VIDEO,
 510                 }, {
 511                         .type     = EM28XX_VMUX_COMPOSITE1,
 512                         .vmux     = SAA7115_COMPOSITE0,
 513                         .amux     = EM28XX_AMUX_LINE_IN,
 514                 }, {
 515                         .type     = EM28XX_VMUX_SVIDEO,
 516                         .vmux     = SAA7115_SVIDEO3,
 517                         .amux     = EM28XX_AMUX_LINE_IN,
 518                 } },
 519         },
 520         [EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = {
 521                 .name         = "Hauppauge WinTV USB 2",
 522                 .tuner_type   = TUNER_PHILIPS_FM1236_MK3,
 523                 .tda9887_conf = TDA9887_PRESENT |
 524                                 TDA9887_PORT1_ACTIVE |
 525                                 TDA9887_PORT2_ACTIVE,
 526                 .decoder      = EM28XX_TVP5150,
 527                 .has_msp34xx  = 1,
 528                 .has_ir_i2c   = 1,
 529                 .input        = { {
 530                         .type     = EM28XX_VMUX_TELEVISION,
 531                         .vmux     = TVP5150_COMPOSITE0,
 532                         .amux     = MSP_INPUT_DEFAULT,
 533                 }, {
 534                         .type     = EM28XX_VMUX_SVIDEO,
 535                         .vmux     = TVP5150_SVIDEO,
 536                         .amux     = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1,
 537                                         MSP_DSP_IN_SCART, MSP_DSP_IN_SCART),
 538                 } },
 539         },
 540         [EM2820_BOARD_DLINK_USB_TV] = {
 541                 .name         = "D-Link DUB-T210 TV Tuner",
 542                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 543                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 544                 .tda9887_conf = TDA9887_PRESENT,
 545                 .decoder      = EM28XX_SAA711X,
 546                 .input        = { {
 547                         .type     = EM28XX_VMUX_TELEVISION,
 548                         .vmux     = SAA7115_COMPOSITE2,
 549                         .amux     = EM28XX_AMUX_LINE_IN,
 550                 }, {
 551                         .type     = EM28XX_VMUX_COMPOSITE1,
 552                         .vmux     = SAA7115_COMPOSITE0,
 553                         .amux     = EM28XX_AMUX_LINE_IN,
 554                 }, {
 555                         .type     = EM28XX_VMUX_SVIDEO,
 556                         .vmux     = SAA7115_SVIDEO3,
 557                         .amux     = EM28XX_AMUX_LINE_IN,
 558                 } },
 559         },
 560         [EM2820_BOARD_HERCULES_SMART_TV_USB2] = {
 561                 .name         = "Hercules Smart TV USB 2.0",
 562                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 563                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 564                 .tda9887_conf = TDA9887_PRESENT,
 565                 .decoder      = EM28XX_SAA711X,
 566                 .input        = { {
 567                         .type     = EM28XX_VMUX_TELEVISION,
 568                         .vmux     = SAA7115_COMPOSITE2,
 569                         .amux     = EM28XX_AMUX_LINE_IN,
 570                 }, {
 571                         .type     = EM28XX_VMUX_COMPOSITE1,
 572                         .vmux     = SAA7115_COMPOSITE0,
 573                         .amux     = EM28XX_AMUX_LINE_IN,
 574                 }, {
 575                         .type     = EM28XX_VMUX_SVIDEO,
 576                         .vmux     = SAA7115_SVIDEO3,
 577                         .amux     = EM28XX_AMUX_LINE_IN,
 578                 } },
 579         },
 580         [EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = {
 581                 .name         = "Pinnacle PCTV USB 2 (Philips FM1216ME)",
 582                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 583                 .tuner_type   = TUNER_PHILIPS_FM1216ME_MK3,
 584                 .tda9887_conf = TDA9887_PRESENT,
 585                 .decoder      = EM28XX_SAA711X,
 586                 .input        = { {
 587                         .type     = EM28XX_VMUX_TELEVISION,
 588                         .vmux     = SAA7115_COMPOSITE2,
 589                         .amux     = EM28XX_AMUX_VIDEO,
 590                 }, {
 591                         .type     = EM28XX_VMUX_COMPOSITE1,
 592                         .vmux     = SAA7115_COMPOSITE0,
 593                         .amux     = EM28XX_AMUX_LINE_IN,
 594                 }, {
 595                         .type     = EM28XX_VMUX_SVIDEO,
 596                         .vmux     = SAA7115_SVIDEO3,
 597                         .amux     = EM28XX_AMUX_LINE_IN,
 598                 } },
 599         },
 600         [EM2820_BOARD_GADMEI_UTV310] = {
 601                 .name         = "Gadmei UTV310",
 602                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 603                 .tuner_type   = TUNER_TNF_5335MF,
 604                 .tda9887_conf = TDA9887_PRESENT,
 605                 .decoder      = EM28XX_SAA711X,
 606                 .input        = { {
 607                         .type     = EM28XX_VMUX_TELEVISION,
 608                         .vmux     = SAA7115_COMPOSITE1,
 609                         .amux     = EM28XX_AMUX_LINE_IN,
 610                 }, {
 611                         .type     = EM28XX_VMUX_COMPOSITE1,
 612                         .vmux     = SAA7115_COMPOSITE0,
 613                         .amux     = EM28XX_AMUX_LINE_IN,
 614                 }, {
 615                         .type     = EM28XX_VMUX_SVIDEO,
 616                         .vmux     = SAA7115_SVIDEO3,
 617                         .amux     = EM28XX_AMUX_LINE_IN,
 618                 } },
 619         },
 620         [EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = {
 621                 .name         = "Leadtek Winfast USB II Deluxe",
 622                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 623                 .tuner_type   = TUNER_PHILIPS_FM1216ME_MK3,
 624                 .has_ir_i2c   = 1,
 625                 .tvaudio_addr = 0x58,
 626                 .tda9887_conf = TDA9887_PRESENT |
 627                                 TDA9887_PORT2_ACTIVE |
 628                                 TDA9887_QSS,
 629                 .decoder      = EM28XX_SAA711X,
 630                 .adecoder     = EM28XX_TVAUDIO,
 631                 .input        = { {
 632                         .type     = EM28XX_VMUX_TELEVISION,
 633                         .vmux     = SAA7115_COMPOSITE4,
 634                         .amux     = EM28XX_AMUX_AUX,
 635                 }, {
 636                         .type     = EM28XX_VMUX_COMPOSITE1,
 637                         .vmux     = SAA7115_COMPOSITE5,
 638                         .amux     = EM28XX_AMUX_LINE_IN,
 639                 }, {
 640                         .type     = EM28XX_VMUX_SVIDEO,
 641                         .vmux     = SAA7115_SVIDEO3,
 642                         .amux     = EM28XX_AMUX_LINE_IN,
 643                 } },
 644                         .radio    = {
 645                         .type     = EM28XX_RADIO,
 646                         .amux     = EM28XX_AMUX_AUX,
 647                         }
 648         },
 649         [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = {
 650                 .name         = "Videology 20K14XUSB USB2.0",
 651                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 652                 .tuner_type   = TUNER_ABSENT,
 653                 .is_webcam    = 1,
 654                 .input        = { {
 655                         .type     = EM28XX_VMUX_COMPOSITE1,
 656                         .vmux     = 0,
 657                         .amux     = EM28XX_AMUX_VIDEO,
 658                 } },
 659         },
 660         [EM2820_BOARD_SILVERCREST_WEBCAM] = {
 661                 .name         = "Silvercrest Webcam 1.3mpix",
 662                 .tuner_type   = TUNER_ABSENT,
 663                 .is_webcam    = 1,
 664                 .input        = { {
 665                         .type     = EM28XX_VMUX_COMPOSITE1,
 666                         .vmux     = 0,
 667                         .amux     = EM28XX_AMUX_VIDEO,
 668                         .gpio     = silvercrest_reg_seq,
 669                 } },
 670         },
 671         [EM2821_BOARD_SUPERCOMP_USB_2] = {
 672                 .name         = "Supercomp USB 2.0 TV",
 673                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 674                 .tuner_type   = TUNER_PHILIPS_FM1236_MK3,
 675                 .tda9887_conf = TDA9887_PRESENT |
 676                                 TDA9887_PORT1_ACTIVE |
 677                                 TDA9887_PORT2_ACTIVE,
 678                 .decoder      = EM28XX_SAA711X,
 679                 .input        = { {
 680                         .type     = EM28XX_VMUX_TELEVISION,
 681                         .vmux     = SAA7115_COMPOSITE2,
 682                         .amux     = EM28XX_AMUX_LINE_IN,
 683                 }, {
 684                         .type     = EM28XX_VMUX_COMPOSITE1,
 685                         .vmux     = SAA7115_COMPOSITE0,
 686                         .amux     = EM28XX_AMUX_VIDEO,
 687                 }, {
 688                         .type     = EM28XX_VMUX_SVIDEO,
 689                         .vmux     = SAA7115_SVIDEO3,
 690                         .amux     = EM28XX_AMUX_LINE_IN,
 691                 } },
 692         },
 693         [EM2821_BOARD_USBGEAR_VD204] = {
 694                 .name         = "Usbgear VD204v9",
 695                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 696                 .tuner_type   = TUNER_ABSENT,   /* Capture only device */
 697                 .decoder      = EM28XX_SAA711X,
 698                 .input        = { {
 699                         .type  = EM28XX_VMUX_COMPOSITE1,
 700                         .vmux  = SAA7115_COMPOSITE0,
 701                         .amux  = EM28XX_AMUX_LINE_IN,
 702                 }, {
 703                         .type  = EM28XX_VMUX_SVIDEO,
 704                         .vmux  = SAA7115_SVIDEO3,
 705                         .amux  = EM28XX_AMUX_LINE_IN,
 706                 } },
 707         },
 708         [EM2860_BOARD_NETGMBH_CAM] = {
 709                 /* Beijing Huaqi Information Digital Technology Co., Ltd */
 710                 .name         = "NetGMBH Cam",
 711                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 712                 .tuner_type   = TUNER_ABSENT,
 713                 .is_webcam    = 1,
 714                 .input        = { {
 715                         .type     = EM28XX_VMUX_COMPOSITE1,
 716                         .vmux     = 0,
 717                         .amux     = EM28XX_AMUX_VIDEO,
 718                 } },
 719         },
 720         [EM2860_BOARD_TYPHOON_DVD_MAKER] = {
 721                 .name         = "Typhoon DVD Maker",
 722                 .decoder      = EM28XX_SAA711X,
 723                 .tuner_type   = TUNER_ABSENT,   /* Capture only device */
 724                 .input        = { {
 725                         .type  = EM28XX_VMUX_COMPOSITE1,
 726                         .vmux  = SAA7115_COMPOSITE0,
 727                         .amux  = EM28XX_AMUX_LINE_IN,
 728                 }, {
 729                         .type  = EM28XX_VMUX_SVIDEO,
 730                         .vmux  = SAA7115_SVIDEO3,
 731                         .amux  = EM28XX_AMUX_LINE_IN,
 732                 } },
 733         },
 734         [EM2860_BOARD_GADMEI_UTV330] = {
 735                 .name         = "Gadmei UTV330",
 736                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 737                 .tuner_type   = TUNER_TNF_5335MF,
 738                 .tda9887_conf = TDA9887_PRESENT,
 739                 .decoder      = EM28XX_SAA711X,
 740                 .input        = { {
 741                         .type     = EM28XX_VMUX_TELEVISION,
 742                         .vmux     = SAA7115_COMPOSITE2,
 743                         .amux     = EM28XX_AMUX_VIDEO,
 744                 }, {
 745                         .type     = EM28XX_VMUX_COMPOSITE1,
 746                         .vmux     = SAA7115_COMPOSITE0,
 747                         .amux     = EM28XX_AMUX_LINE_IN,
 748                 }, {
 749                         .type     = EM28XX_VMUX_SVIDEO,
 750                         .vmux     = SAA7115_SVIDEO3,
 751                         .amux     = EM28XX_AMUX_LINE_IN,
 752                 } },
 753         },
 754         [EM2861_BOARD_GADMEI_UTV330PLUS] = {
 755                 .name         = "Gadmei UTV330+",
 756                 .tuner_type   = TUNER_TNF_5335MF,
 757                 .tda9887_conf = TDA9887_PRESENT,
 758                 .ir_codes     = RC_MAP_GADMEI_RM008Z,
 759                 .decoder      = EM28XX_SAA711X,
 760                 .xclk         = EM28XX_XCLK_FREQUENCY_12MHZ,
 761                 .input        = { {
 762                         .type     = EM28XX_VMUX_TELEVISION,
 763                         .vmux     = SAA7115_COMPOSITE2,
 764                         .amux     = EM28XX_AMUX_VIDEO,
 765                 }, {
 766                         .type     = EM28XX_VMUX_COMPOSITE1,
 767                         .vmux     = SAA7115_COMPOSITE0,
 768                         .amux     = EM28XX_AMUX_LINE_IN,
 769                 }, {
 770                         .type     = EM28XX_VMUX_SVIDEO,
 771                         .vmux     = SAA7115_SVIDEO3,
 772                         .amux     = EM28XX_AMUX_LINE_IN,
 773                 } },
 774         },
 775         [EM2860_BOARD_TERRATEC_HYBRID_XS] = {
 776                 .name         = "Terratec Cinergy A Hybrid XS",
 777                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 778                 .tuner_type   = TUNER_XC2028,
 779                 .tuner_gpio   = default_tuner_gpio,
 780                 .decoder      = EM28XX_TVP5150,
 781
 782                 .input        = { {
 783                         .type     = EM28XX_VMUX_TELEVISION,
 784                         .vmux     = TVP5150_COMPOSITE0,
 785                         .amux     = EM28XX_AMUX_VIDEO,
 786                         .gpio     = hauppauge_wintv_hvr_900_analog,
 787                 }, {
 788                         .type     = EM28XX_VMUX_COMPOSITE1,
 789                         .vmux     = TVP5150_COMPOSITE1,
 790                         .amux     = EM28XX_AMUX_LINE_IN,
 791                         .gpio     = hauppauge_wintv_hvr_900_analog,
 792                 }, {
 793                         .type     = EM28XX_VMUX_SVIDEO,
 794                         .vmux     = TVP5150_SVIDEO,
 795                         .amux     = EM28XX_AMUX_LINE_IN,
 796                         .gpio     = hauppauge_wintv_hvr_900_analog,
 797                 } },
 798         },
 799         [EM2861_BOARD_KWORLD_PVRTV_300U] = {
 800                 .name         = "KWorld PVRTV 300U",
 801                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 802                 .tuner_type   = TUNER_XC2028,
 803                 .tuner_gpio   = default_tuner_gpio,
 804                 .decoder      = EM28XX_TVP5150,
 805                 .input        = { {
 806                         .type     = EM28XX_VMUX_TELEVISION,
 807                         .vmux     = TVP5150_COMPOSITE0,
 808                         .amux     = EM28XX_AMUX_VIDEO,
 809                 }, {
 810                         .type     = EM28XX_VMUX_COMPOSITE1,
 811                         .vmux     = TVP5150_COMPOSITE1,
 812                         .amux     = EM28XX_AMUX_LINE_IN,
 813                 }, {
 814                         .type     = EM28XX_VMUX_SVIDEO,
 815                         .vmux     = TVP5150_SVIDEO,
 816                         .amux     = EM28XX_AMUX_LINE_IN,
 817                 } },
 818         },
 819         [EM2861_BOARD_YAKUMO_MOVIE_MIXER] = {
 820                 .name          = "Yakumo MovieMixer",
 821                 .tuner_type    = TUNER_ABSENT,  /* Capture only device */
 822                 .decoder       = EM28XX_TVP5150,
 823                 .input         = { {
 824                         .type     = EM28XX_VMUX_TELEVISION,
 825                         .vmux     = TVP5150_COMPOSITE0,
 826                         .amux     = EM28XX_AMUX_VIDEO,
 827                 }, {
 828                         .type     = EM28XX_VMUX_COMPOSITE1,
 829                         .vmux     = TVP5150_COMPOSITE1,
 830                         .amux     = EM28XX_AMUX_LINE_IN,
 831                 }, {
 832                         .type     = EM28XX_VMUX_SVIDEO,
 833                         .vmux     = TVP5150_SVIDEO,
 834                         .amux     = EM28XX_AMUX_LINE_IN,
 835                 } },
 836         },
 837         [EM2860_BOARD_TVP5150_REFERENCE_DESIGN] = {
 838                 .name          = "EM2860/TVP5150 Reference Design",
 839                 .tuner_type    = TUNER_ABSENT,  /* Capture only device */
 840                 .decoder       = EM28XX_TVP5150,
 841                 .input         = { {
 842                         .type     = EM28XX_VMUX_COMPOSITE1,
 843                         .vmux     = TVP5150_COMPOSITE1,
 844                         .amux     = EM28XX_AMUX_LINE_IN,
 845                 }, {
 846                         .type     = EM28XX_VMUX_SVIDEO,
 847                         .vmux     = TVP5150_SVIDEO,
 848                         .amux     = EM28XX_AMUX_LINE_IN,
 849                 } },
 850         },
 851         [EM2861_BOARD_PLEXTOR_PX_TV100U] = {
 852                 .name         = "Plextor ConvertX PX-TV100U",
 853                 .tuner_type   = TUNER_TNF_5335MF,
 854                 .xclk         = EM28XX_XCLK_I2S_MSB_TIMING |
 855                                 EM28XX_XCLK_FREQUENCY_12MHZ,
 856                 .tda9887_conf = TDA9887_PRESENT,
 857                 .decoder      = EM28XX_TVP5150,
 858                 .has_msp34xx  = 1,
 859                 .input        = { {
 860                         .type     = EM28XX_VMUX_TELEVISION,
 861                         .vmux     = TVP5150_COMPOSITE0,
 862                         .amux     = EM28XX_AMUX_LINE_IN,
 863                         .gpio     = pinnacle_hybrid_pro_analog,
 864                 }, {
 865                         .type     = EM28XX_VMUX_COMPOSITE1,
 866                         .vmux     = TVP5150_COMPOSITE1,
 867                         .amux     = EM28XX_AMUX_LINE_IN,
 868                         .gpio     = pinnacle_hybrid_pro_analog,
 869                 }, {
 870                         .type     = EM28XX_VMUX_SVIDEO,
 871                         .vmux     = TVP5150_SVIDEO,
 872                         .amux     = EM28XX_AMUX_LINE_IN,
 873                         .gpio     = pinnacle_hybrid_pro_analog,
 874                 } },
 875         },
 876
 877         /* Those boards with em2870 are DVB Only*/
 878
 879         [EM2870_BOARD_TERRATEC_XS] = {
 880                 .name         = "Terratec Cinergy T XS",
 881                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 882                 .tuner_type   = TUNER_XC2028,
 883                 .tuner_gpio   = default_tuner_gpio,
 884         },
 885         [EM2870_BOARD_TERRATEC_XS_MT2060] = {
 886                 .name         = "Terratec Cinergy T XS (MT2060)",
 887                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 888                 .tuner_type   = TUNER_ABSENT, /* MT2060 */
 889         },
 890         [EM2870_BOARD_KWORLD_350U] = {
 891                 .name         = "Kworld 350 U DVB-T",
 892                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 893                 .tuner_type   = TUNER_XC2028,
 894                 .tuner_gpio   = default_tuner_gpio,
 895         },
 896         [EM2870_BOARD_KWORLD_355U] = {
 897                 .name         = "Kworld 355 U DVB-T",
 898                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 899                 .tuner_type   = TUNER_ABSENT,
 900                 .tuner_gpio   = default_tuner_gpio,
 901                 .has_dvb      = 1,
 902                 .dvb_gpio     = default_digital,
 903         },
 904         [EM2870_BOARD_PINNACLE_PCTV_DVB] = {
 905                 .name         = "Pinnacle PCTV DVB-T",
 906                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 907                 .tuner_type   = TUNER_ABSENT, /* MT2060 */
 908                 /* djh - I have serious doubts this is right... */
 909                 .xclk         = EM28XX_XCLK_IR_RC5_MODE |
 910                                 EM28XX_XCLK_FREQUENCY_10MHZ,
 911         },
 912         [EM2870_BOARD_COMPRO_VIDEOMATE] = {
 913                 .name         = "Compro, VideoMate U3",
 914                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 915                 .tuner_type   = TUNER_ABSENT, /* MT2060 */
 916         },
 917
 918         [EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = {
 919                 .name         = "Terratec Hybrid XS Secam",
 920                 .has_msp34xx  = 1,
 921                 .tuner_type   = TUNER_XC2028,
 922                 .tuner_gpio   = default_tuner_gpio,
 923                 .decoder      = EM28XX_TVP5150,
 924                 .has_dvb      = 1,
 925                 .dvb_gpio     = terratec_cinergy_USB_XS_FR_digital,
 926                 .input        = { {
 927                         .type     = EM28XX_VMUX_TELEVISION,
 928                         .vmux     = TVP5150_COMPOSITE0,
 929                         .amux     = EM28XX_AMUX_VIDEO,
 930                         .gpio     = terratec_cinergy_USB_XS_FR_analog,
 931                 }, {
 932                         .type     = EM28XX_VMUX_COMPOSITE1,
 933                         .vmux     = TVP5150_COMPOSITE1,
 934                         .amux     = EM28XX_AMUX_LINE_IN,
 935                         .gpio     = terratec_cinergy_USB_XS_FR_analog,
 936                 }, {
 937                         .type     = EM28XX_VMUX_SVIDEO,
 938                         .vmux     = TVP5150_SVIDEO,
 939                         .amux     = EM28XX_AMUX_LINE_IN,
 940                         .gpio     = terratec_cinergy_USB_XS_FR_analog,
 941                 } },
 942         },
 943         [EM2884_BOARD_TERRATEC_H5] = {
 944                 .name         = "Terratec Cinergy H5",
 945                 .has_dvb      = 1,
 946 #if 0
 947                 .tuner_type   = TUNER_PHILIPS_TDA8290,
 948                 .tuner_addr   = 0x41,
 949                 .dvb_gpio     = terratec_h5_digital, /* FIXME: probably wrong */
 950                 .tuner_gpio   = terratec_h5_gpio,
 951 #else
 952                 .tuner_type   = TUNER_ABSENT,
 953 #endif
 954                 .i2c_speed    = EM2874_I2C_SECONDARY_BUS_SELECT |
 955                                 EM28XX_I2C_CLK_WAIT_ENABLE |
 956                                 EM28XX_I2C_FREQ_400_KHZ,
 957         },
 958         [EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C] = {
 959                 .name         = "Hauppauge WinTV HVR 930C",
 960                 .has_dvb      = 1,
 961 #if 0 /* FIXME: Add analog support */
 962                 .tuner_type   = TUNER_XC5000,
 963                 .tuner_addr   = 0x41,
 964                 .dvb_gpio     = hauppauge_930c_digital,
 965                 .tuner_gpio   = hauppauge_930c_gpio,
 966 #else
 967                 .tuner_type   = TUNER_ABSENT,
 968 #endif
 969                 .ir_codes     = RC_MAP_HAUPPAUGE,
 970                 .i2c_speed    = EM2874_I2C_SECONDARY_BUS_SELECT |
 971                                 EM28XX_I2C_CLK_WAIT_ENABLE |
 972                                 EM28XX_I2C_FREQ_400_KHZ,
 973         },
 974         [EM2884_BOARD_CINERGY_HTC_STICK] = {
 975                 .name         = "Terratec Cinergy HTC Stick",
 976                 .has_dvb      = 1,
 977                 .ir_codes     = RC_MAP_NEC_TERRATEC_CINERGY_XS,
 978 #if 0
 979                 .tuner_type   = TUNER_PHILIPS_TDA8290,
 980                 .tuner_addr   = 0x41,
 981                 .dvb_gpio     = terratec_h5_digital, /* FIXME: probably wrong */
 982                 .tuner_gpio   = terratec_h5_gpio,
 983 #endif
 984                 .i2c_speed    = EM2874_I2C_SECONDARY_BUS_SELECT |
 985                                 EM28XX_I2C_CLK_WAIT_ENABLE |
 986                                 EM28XX_I2C_FREQ_400_KHZ,
 987         },
 988         [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = {
 989                 .name         = "Hauppauge WinTV HVR 900",
 990                 .tda9887_conf = TDA9887_PRESENT,
 991                 .tuner_type   = TUNER_XC2028,
 992                 .tuner_gpio   = default_tuner_gpio,
 993                 .mts_firmware = 1,
 994                 .has_dvb      = 1,
 995                 .dvb_gpio     = hauppauge_wintv_hvr_900_digital,
 996                 .ir_codes     = RC_MAP_HAUPPAUGE,
 997                 .decoder      = EM28XX_TVP5150,
 998                 .input        = { {
 999                         .type     = EM28XX_VMUX_TELEVISION,
1000                         .vmux     = TVP5150_COMPOSITE0,
1001                         .amux     = EM28XX_AMUX_VIDEO,
1002                         .gpio     = hauppauge_wintv_hvr_900_analog,
1003                 }, {
1004                         .type     = EM28XX_VMUX_COMPOSITE1,
1005                         .vmux     = TVP5150_COMPOSITE1,
1006                         .amux     = EM28XX_AMUX_LINE_IN,
1007                         .gpio     = hauppauge_wintv_hvr_900_analog,
1008                 }, {
1009                         .type     = EM28XX_VMUX_SVIDEO,
1010                         .vmux     = TVP5150_SVIDEO,
1011                         .amux     = EM28XX_AMUX_LINE_IN,
1012                         .gpio     = hauppauge_wintv_hvr_900_analog,
1013                 } },
1014         },
1015         [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = {
1016                 .name         = "Hauppauge WinTV HVR 900 (R2)",
1017                 .tda9887_conf = TDA9887_PRESENT,
1018                 .tuner_type   = TUNER_XC2028,
1019                 .tuner_gpio   = default_tuner_gpio,
1020                 .mts_firmware = 1,
1021                 .has_dvb      = 1,
1022                 .dvb_gpio     = hauppauge_wintv_hvr_900R2_digital,
1023                 .ir_codes     = RC_MAP_HAUPPAUGE,
1024                 .decoder      = EM28XX_TVP5150,
1025                 .input        = { {
1026                         .type     = EM28XX_VMUX_TELEVISION,
1027                         .vmux     = TVP5150_COMPOSITE0,
1028                         .amux     = EM28XX_AMUX_VIDEO,
1029                         .gpio     = hauppauge_wintv_hvr_900_analog,
1030                 }, {
1031                         .type     = EM28XX_VMUX_COMPOSITE1,
1032                         .vmux     = TVP5150_COMPOSITE1,
1033                         .amux     = EM28XX_AMUX_LINE_IN,
1034                         .gpio     = hauppauge_wintv_hvr_900_analog,
1035                 }, {
1036                         .type     = EM28XX_VMUX_SVIDEO,
1037                         .vmux     = TVP5150_SVIDEO,
1038                         .amux     = EM28XX_AMUX_LINE_IN,
1039                         .gpio     = hauppauge_wintv_hvr_900_analog,
1040                 } },
1041         },
1042         [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850] = {
1043                 .name           = "Hauppauge WinTV HVR 850",
1044                 .tuner_type     = TUNER_XC2028,
1045                 .tuner_gpio     = default_tuner_gpio,
1046                 .mts_firmware   = 1,
1047                 .has_dvb        = 1,
1048                 .dvb_gpio       = hauppauge_wintv_hvr_900_digital,
1049                 .ir_codes       = RC_MAP_HAUPPAUGE,
1050                 .decoder        = EM28XX_TVP5150,
1051                 .input          = { {
1052                         .type     = EM28XX_VMUX_TELEVISION,
1053                         .vmux     = TVP5150_COMPOSITE0,
1054                         .amux     = EM28XX_AMUX_VIDEO,
1055                         .gpio     = hauppauge_wintv_hvr_900_analog,
1056                 }, {
1057                         .type     = EM28XX_VMUX_COMPOSITE1,
1058                         .vmux     = TVP5150_COMPOSITE1,
1059                         .amux     = EM28XX_AMUX_LINE_IN,
1060                         .gpio     = hauppauge_wintv_hvr_900_analog,
1061                 }, {
1062                         .type     = EM28XX_VMUX_SVIDEO,
1063                         .vmux     = TVP5150_SVIDEO,
1064                         .amux     = EM28XX_AMUX_LINE_IN,
1065                         .gpio     = hauppauge_wintv_hvr_900_analog,
1066                 } },
1067         },
1068         [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = {
1069                 .name           = "Hauppauge WinTV HVR 950",
1070                 .tuner_type     = TUNER_XC2028,
1071                 .tuner_gpio     = default_tuner_gpio,
1072                 .mts_firmware   = 1,
1073                 .has_dvb        = 1,
1074                 .dvb_gpio       = hauppauge_wintv_hvr_900_digital,
1075                 .ir_codes       = RC_MAP_HAUPPAUGE,
1076                 .decoder        = EM28XX_TVP5150,
1077                 .input          = { {
1078                         .type     = EM28XX_VMUX_TELEVISION,
1079                         .vmux     = TVP5150_COMPOSITE0,
1080                         .amux     = EM28XX_AMUX_VIDEO,
1081                         .gpio     = hauppauge_wintv_hvr_900_analog,
1082                 }, {
1083                         .type     = EM28XX_VMUX_COMPOSITE1,
1084                         .vmux     = TVP5150_COMPOSITE1,
1085                         .amux     = EM28XX_AMUX_LINE_IN,
1086                         .gpio     = hauppauge_wintv_hvr_900_analog,
1087                 }, {
1088                         .type     = EM28XX_VMUX_SVIDEO,
1089                         .vmux     = TVP5150_SVIDEO,
1090                         .amux     = EM28XX_AMUX_LINE_IN,
1091                         .gpio     = hauppauge_wintv_hvr_900_analog,
1092                 } },
1093         },
1094         [EM2880_BOARD_PINNACLE_PCTV_HD_PRO] = {
1095                 .name           = "Pinnacle PCTV HD Pro Stick",
1096                 .tuner_type     = TUNER_XC2028,
1097                 .tuner_gpio   = default_tuner_gpio,
1098                 .mts_firmware   = 1,
1099                 .has_dvb        = 1,
1100                 .dvb_gpio       = hauppauge_wintv_hvr_900_digital,
1101                 .ir_codes       = RC_MAP_PINNACLE_PCTV_HD,
1102                 .decoder        = EM28XX_TVP5150,
1103                 .input          = { {
1104                         .type     = EM28XX_VMUX_TELEVISION,
1105                         .vmux     = TVP5150_COMPOSITE0,
1106                         .amux     = EM28XX_AMUX_VIDEO,
1107                         .gpio     = hauppauge_wintv_hvr_900_analog,
1108                 }, {
1109                         .type     = EM28XX_VMUX_COMPOSITE1,
1110                         .vmux     = TVP5150_COMPOSITE1,
1111                         .amux     = EM28XX_AMUX_LINE_IN,
1112                         .gpio     = hauppauge_wintv_hvr_900_analog,
1113                 }, {
1114                         .type     = EM28XX_VMUX_SVIDEO,
1115                         .vmux     = TVP5150_SVIDEO,
1116                         .amux     = EM28XX_AMUX_LINE_IN,
1117                         .gpio     = hauppauge_wintv_hvr_900_analog,
1118                 } },
1119         },
1120         [EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = {
1121                 .name           = "AMD ATI TV Wonder HD 600",
1122                 .tuner_type     = TUNER_XC2028,
1123                 .tuner_gpio     = default_tuner_gpio,
1124                 .mts_firmware   = 1,
1125                 .has_dvb        = 1,
1126                 .dvb_gpio       = hauppauge_wintv_hvr_900_digital,
1127                 .ir_codes       = RC_MAP_ATI_TV_WONDER_HD_600,
1128                 .decoder        = EM28XX_TVP5150,
1129                 .input          = { {
1130                         .type     = EM28XX_VMUX_TELEVISION,
1131                         .vmux     = TVP5150_COMPOSITE0,
1132                         .amux     = EM28XX_AMUX_VIDEO,
1133                         .gpio     = hauppauge_wintv_hvr_900_analog,
1134                 }, {
1135                         .type     = EM28XX_VMUX_COMPOSITE1,
1136                         .vmux     = TVP5150_COMPOSITE1,
1137                         .amux     = EM28XX_AMUX_LINE_IN,
1138                         .gpio     = hauppauge_wintv_hvr_900_analog,
1139                 }, {
1140                         .type     = EM28XX_VMUX_SVIDEO,
1141                         .vmux     = TVP5150_SVIDEO,
1142                         .amux     = EM28XX_AMUX_LINE_IN,
1143                         .gpio     = hauppauge_wintv_hvr_900_analog,
1144                 } },
1145         },
1146         [EM2880_BOARD_TERRATEC_HYBRID_XS] = {
1147                 .name           = "Terratec Hybrid XS",
1148                 .tuner_type     = TUNER_XC2028,
1149                 .tuner_gpio     = default_tuner_gpio,
1150                 .decoder        = EM28XX_TVP5150,
1151                 .has_dvb        = 1,
1152                 .dvb_gpio       = default_digital,
1153                 .ir_codes       = RC_MAP_TERRATEC_CINERGY_XS,
1154                 .xclk           = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
1155                 .input          = { {
1156                         .type     = EM28XX_VMUX_TELEVISION,
1157                         .vmux     = TVP5150_COMPOSITE0,
1158                         .amux     = EM28XX_AMUX_VIDEO,
1159                         .gpio     = default_analog,
1160                 }, {
1161                         .type     = EM28XX_VMUX_COMPOSITE1,
1162                         .vmux     = TVP5150_COMPOSITE1,
1163                         .amux     = EM28XX_AMUX_LINE_IN,
1164                         .gpio     = default_analog,
1165                 }, {
1166                         .type     = EM28XX_VMUX_SVIDEO,
1167                         .vmux     = TVP5150_SVIDEO,
1168                         .amux     = EM28XX_AMUX_LINE_IN,
1169                         .gpio     = default_analog,
1170                 } },
1171         },
1172         /* maybe there's a reason behind it why Terratec sells the Hybrid XS
1173            as Prodigy XS with a different PID, let's keep it separated for now
1174            maybe we'll need it lateron */
1175         [EM2880_BOARD_TERRATEC_PRODIGY_XS] = {
1176                 .name         = "Terratec Prodigy XS",
1177                 .tuner_type   = TUNER_XC2028,
1178                 .tuner_gpio   = default_tuner_gpio,
1179                 .decoder      = EM28XX_TVP5150,
1180                 .input        = { {
1181                         .type     = EM28XX_VMUX_TELEVISION,
1182                         .vmux     = TVP5150_COMPOSITE0,
1183                         .amux     = EM28XX_AMUX_VIDEO,
1184                         .gpio     = hauppauge_wintv_hvr_900_analog,
1185                 }, {
1186                         .type     = EM28XX_VMUX_COMPOSITE1,
1187                         .vmux     = TVP5150_COMPOSITE1,
1188                         .amux     = EM28XX_AMUX_LINE_IN,
1189                         .gpio     = hauppauge_wintv_hvr_900_analog,
1190                 }, {
1191                         .type     = EM28XX_VMUX_SVIDEO,
1192                         .vmux     = TVP5150_SVIDEO,
1193                         .amux     = EM28XX_AMUX_LINE_IN,
1194                         .gpio     = hauppauge_wintv_hvr_900_analog,
1195                 } },
1196         },
1197         [EM2820_BOARD_MSI_VOX_USB_2] = {
1198                 .name              = "MSI VOX USB 2.0",
1199                 .tuner_type        = TUNER_LG_PAL_NEW_TAPC,
1200                 .tda9887_conf      = TDA9887_PRESENT      |
1201                                      TDA9887_PORT1_ACTIVE |
1202                                      TDA9887_PORT2_ACTIVE,
1203                 .max_range_640_480 = 1,
1204                 .decoder           = EM28XX_SAA711X,
1205                 .input             = { {
1206                         .type      = EM28XX_VMUX_TELEVISION,
1207                         .vmux      = SAA7115_COMPOSITE4,
1208                         .amux      = EM28XX_AMUX_VIDEO,
1209                 }, {
1210                         .type      = EM28XX_VMUX_COMPOSITE1,
1211                         .vmux      = SAA7115_COMPOSITE0,
1212                         .amux      = EM28XX_AMUX_LINE_IN,
1213                 }, {
1214                         .type      = EM28XX_VMUX_SVIDEO,
1215                         .vmux      = SAA7115_SVIDEO3,
1216                         .amux      = EM28XX_AMUX_LINE_IN,
1217                 } },
1218         },
1219         [EM2800_BOARD_TERRATEC_CINERGY_200] = {
1220                 .name         = "Terratec Cinergy 200 USB",
1221                 .is_em2800    = 1,
1222                 .has_ir_i2c   = 1,
1223                 .tuner_type   = TUNER_LG_TALN,
1224                 .tda9887_conf = TDA9887_PRESENT,
1225                 .decoder      = EM28XX_SAA711X,
1226                 .input        = { {
1227                         .type     = EM28XX_VMUX_TELEVISION,
1228                         .vmux     = SAA7115_COMPOSITE2,
1229                         .amux     = EM28XX_AMUX_VIDEO,
1230                 }, {
1231                         .type     = EM28XX_VMUX_COMPOSITE1,
1232                         .vmux     = SAA7115_COMPOSITE0,
1233                         .amux     = EM28XX_AMUX_LINE_IN,
1234                 }, {
1235                         .type     = EM28XX_VMUX_SVIDEO,
1236                         .vmux     = SAA7115_SVIDEO3,
1237                         .amux     = EM28XX_AMUX_LINE_IN,
1238                 } },
1239         },
1240         [EM2800_BOARD_GRABBEEX_USB2800] = {
1241                 .name       = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder",
1242                 .is_em2800  = 1,
1243                 .decoder    = EM28XX_SAA711X,
1244                 .tuner_type = TUNER_ABSENT, /* capture only board */
1245                 .input      = { {
1246                         .type     = EM28XX_VMUX_COMPOSITE1,
1247                         .vmux     = SAA7115_COMPOSITE0,
1248                         .amux     = EM28XX_AMUX_LINE_IN,
1249                 }, {
1250                         .type     = EM28XX_VMUX_SVIDEO,
1251                         .vmux     = SAA7115_SVIDEO3,
1252                         .amux     = EM28XX_AMUX_LINE_IN,
1253                 } },
1254         },
1255         [EM2800_BOARD_VC211A] = {
1256                 .name         = "Actionmaster/LinXcel/Digitus VC211A",
1257                 .is_em2800    = 1,
1258                 .tuner_type   = TUNER_ABSENT,   /* Capture-only board */
1259                 .decoder      = EM28XX_SAA711X,
1260                 .input        = { {
1261                         .type     = EM28XX_VMUX_COMPOSITE1,
1262                         .vmux     = SAA7115_COMPOSITE0,
1263                         .amux     = EM28XX_AMUX_LINE_IN,
1264                         .gpio     = vc211a_enable,
1265                 }, {
1266                         .type     = EM28XX_VMUX_SVIDEO,
1267                         .vmux     = SAA7115_SVIDEO3,
1268                         .amux     = EM28XX_AMUX_LINE_IN,
1269                         .gpio     = vc211a_enable,
1270                 } },
1271         },
1272         [EM2800_BOARD_LEADTEK_WINFAST_USBII] = {
1273                 .name         = "Leadtek Winfast USB II",
1274                 .is_em2800    = 1,
1275                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
1276                 .tda9887_conf = TDA9887_PRESENT,
1277                 .decoder      = EM28XX_SAA711X,
1278                 .input        = { {
1279                         .type     = EM28XX_VMUX_TELEVISION,
1280                         .vmux     = SAA7115_COMPOSITE2,
1281                         .amux     = EM28XX_AMUX_VIDEO,
1282                 }, {
1283                         .type     = EM28XX_VMUX_COMPOSITE1,
1284                         .vmux     = SAA7115_COMPOSITE0,
1285                         .amux     = EM28XX_AMUX_LINE_IN,
1286                 }, {
1287                         .type     = EM28XX_VMUX_SVIDEO,
1288                         .vmux     = SAA7115_SVIDEO3,
1289                         .amux     = EM28XX_AMUX_LINE_IN,
1290                 } },
1291         },
1292         [EM2800_BOARD_KWORLD_USB2800] = {
1293                 .name         = "Kworld USB2800",
1294                 .is_em2800    = 1,
1295                 .tuner_type   = TUNER_PHILIPS_FCV1236D,
1296                 .tda9887_conf = TDA9887_PRESENT,
1297                 .decoder      = EM28XX_SAA711X,
1298                 .input        = { {
1299                         .type     = EM28XX_VMUX_TELEVISION,
1300                         .vmux     = SAA7115_COMPOSITE2,
1301                         .amux     = EM28XX_AMUX_VIDEO,
1302                 }, {
1303                         .type     = EM28XX_VMUX_COMPOSITE1,
1304                         .vmux     = SAA7115_COMPOSITE0,
1305                         .amux     = EM28XX_AMUX_LINE_IN,
1306                 }, {
1307                         .type     = EM28XX_VMUX_SVIDEO,
1308                         .vmux     = SAA7115_SVIDEO3,
1309                         .amux     = EM28XX_AMUX_LINE_IN,
1310                 } },
1311         },
1312         [EM2820_BOARD_PINNACLE_DVC_90] = {
1313                 .name         = "Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker "
1314                                "/ Kworld DVD Maker 2 / Plextor ConvertX PX-AV100U",
1315                 .tuner_type   = TUNER_ABSENT, /* capture only board */
1316                 .decoder      = EM28XX_SAA711X,
1317                 .input        = { {
1318                         .type     = EM28XX_VMUX_COMPOSITE1,
1319                         .vmux     = SAA7115_COMPOSITE0,
1320                         .amux     = EM28XX_AMUX_LINE_IN,
1321                 }, {
1322                         .type     = EM28XX_VMUX_SVIDEO,
1323                         .vmux     = SAA7115_SVIDEO3,
1324                         .amux     = EM28XX_AMUX_LINE_IN,
1325                 } },
1326         },
1327         [EM2800_BOARD_VGEAR_POCKETTV] = {
1328                 .name         = "V-Gear PocketTV",
1329                 .is_em2800    = 1,
1330                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
1331                 .tda9887_conf = TDA9887_PRESENT,
1332                 .decoder      = EM28XX_SAA711X,
1333                 .input        = { {
1334                         .type     = EM28XX_VMUX_TELEVISION,
1335                         .vmux     = SAA7115_COMPOSITE2,
1336                         .amux     = EM28XX_AMUX_VIDEO,
1337                 }, {
1338                         .type     = EM28XX_VMUX_COMPOSITE1,
1339                         .vmux     = SAA7115_COMPOSITE0,
1340                         .amux     = EM28XX_AMUX_LINE_IN,
1341                 }, {
1342                         .type     = EM28XX_VMUX_SVIDEO,
1343                         .vmux     = SAA7115_SVIDEO3,
1344                         .amux     = EM28XX_AMUX_LINE_IN,
1345                 } },
1346         },
1347         [EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2] = {
1348                 .name         = "Pixelview PlayTV Box 4 USB 2.0",
1349                 .tda9887_conf = TDA9887_PRESENT,
1350                 .tuner_type   = TUNER_YMEC_TVF_5533MF,
1351                 .decoder      = EM28XX_SAA711X,
1352                 .input        = { {
1353                         .type     = EM28XX_VMUX_TELEVISION,
1354                         .vmux     = SAA7115_COMPOSITE2,
1355                         .amux     = EM28XX_AMUX_VIDEO,
1356                         .aout     = EM28XX_AOUT_MONO |  /* I2S */
1357                                     EM28XX_AOUT_MASTER, /* Line out pin */
1358                 }, {
1359                         .type     = EM28XX_VMUX_COMPOSITE1,
1360                         .vmux     = SAA7115_COMPOSITE0,
1361                         .amux     = EM28XX_AMUX_LINE_IN,
1362                 }, {
1363                         .type     = EM28XX_VMUX_SVIDEO,
1364                         .vmux     = SAA7115_SVIDEO3,
1365                         .amux     = EM28XX_AMUX_LINE_IN,
1366                 } },
1367         },
1368         [EM2820_BOARD_PROLINK_PLAYTV_USB2] = {
1369                 .name         = "SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0",
1370                 .has_snapshot_button = 1,
1371                 .tda9887_conf = TDA9887_PRESENT,
1372                 .tuner_type   = TUNER_YMEC_TVF_5533MF,
1373                 .decoder      = EM28XX_SAA711X,
1374                 .input        = { {
1375                         .type     = EM28XX_VMUX_TELEVISION,
1376                         .vmux     = SAA7115_COMPOSITE2,
1377                         .amux     = EM28XX_AMUX_VIDEO,
1378                         .aout     = EM28XX_AOUT_MONO |  /* I2S */
1379                                     EM28XX_AOUT_MASTER, /* Line out pin */
1380                 }, {
1381                         .type     = EM28XX_VMUX_COMPOSITE1,
1382                         .vmux     = SAA7115_COMPOSITE0,
1383                         .amux     = EM28XX_AMUX_LINE_IN,
1384                 }, {
1385                         .type     = EM28XX_VMUX_SVIDEO,
1386                         .vmux     = SAA7115_SVIDEO3,
1387                         .amux     = EM28XX_AMUX_LINE_IN,
1388                 } },
1389         },
1390         [EM2860_BOARD_SAA711X_REFERENCE_DESIGN] = {
1391                 .name                = "EM2860/SAA711X Reference Design",
1392                 .has_snapshot_button = 1,
1393                 .tuner_type          = TUNER_ABSENT,
1394                 .decoder             = EM28XX_SAA711X,
1395                 .input               = { {
1396                         .type     = EM28XX_VMUX_SVIDEO,
1397                         .vmux     = SAA7115_SVIDEO3,
1398                 }, {
1399                         .type     = EM28XX_VMUX_COMPOSITE1,
1400                         .vmux     = SAA7115_COMPOSITE0,
1401                 } },
1402         },
1403
1404         [EM2874_BOARD_LEADERSHIP_ISDBT] = {
1405                 .i2c_speed      = EM2874_I2C_SECONDARY_BUS_SELECT |
1406                                   EM28XX_I2C_CLK_WAIT_ENABLE |
1407                                   EM28XX_I2C_FREQ_100_KHZ,
1408                 .xclk           = EM28XX_XCLK_FREQUENCY_10MHZ,
1409                 .name           = "EM2874 Leadership ISDBT",
1410                 .tuner_type     = TUNER_ABSENT,
1411                 .tuner_gpio     = leadership_reset,
1412                 .dvb_gpio       = leadership_digital,
1413                 .has_dvb        = 1,
1414         },
1415
1416         [EM2880_BOARD_MSI_DIGIVOX_AD] = {
1417                 .name         = "MSI DigiVox A/D",
1418                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
1419                 .tuner_type   = TUNER_XC2028,
1420                 .tuner_gpio   = default_tuner_gpio,
1421                 .decoder      = EM28XX_TVP5150,
1422                 .input        = { {
1423                         .type     = EM28XX_VMUX_TELEVISION,
1424                         .vmux     = TVP5150_COMPOSITE0,
1425                         .amux     = EM28XX_AMUX_VIDEO,
1426                         .gpio     = em2880_msi_digivox_ad_analog,
1427                 }, {
1428                         .type     = EM28XX_VMUX_COMPOSITE1,
1429                         .vmux     = TVP5150_COMPOSITE1,
1430                         .amux     = EM28XX_AMUX_LINE_IN,
1431                         .gpio     = em2880_msi_digivox_ad_analog,
1432                 }, {
1433                         .type     = EM28XX_VMUX_SVIDEO,
1434                         .vmux     = TVP5150_SVIDEO,
1435                         .amux     = EM28XX_AMUX_LINE_IN,
1436                         .gpio     = em2880_msi_digivox_ad_analog,
1437                 } },
1438         },
1439         [EM2880_BOARD_MSI_DIGIVOX_AD_II] = {
1440                 .name         = "MSI DigiVox A/D II",
1441                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
1442                 .tuner_type   = TUNER_XC2028,
1443                 .tuner_gpio   = default_tuner_gpio,
1444                 .decoder      = EM28XX_TVP5150,
1445                 .input        = { {
1446                         .type     = EM28XX_VMUX_TELEVISION,
1447                         .vmux     = TVP5150_COMPOSITE0,
1448                         .amux     = EM28XX_AMUX_VIDEO,
1449                         .gpio     = em2880_msi_digivox_ad_analog,
1450                 }, {
1451                         .type     = EM28XX_VMUX_COMPOSITE1,
1452                         .vmux     = TVP5150_COMPOSITE1,
1453                         .amux     = EM28XX_AMUX_LINE_IN,
1454                         .gpio     = em2880_msi_digivox_ad_analog,
1455                 }, {
1456                         .type     = EM28XX_VMUX_SVIDEO,
1457                         .vmux     = TVP5150_SVIDEO,
1458                         .amux     = EM28XX_AMUX_LINE_IN,
1459                         .gpio     = em2880_msi_digivox_ad_analog,
1460                 } },
1461         },
1462         [EM2880_BOARD_KWORLD_DVB_305U] = {
1463                 .name         = "KWorld DVB-T 305U",
1464                 .tuner_type   = TUNER_XC2028,
1465                 .tuner_gpio   = default_tuner_gpio,
1466                 .decoder      = EM28XX_TVP5150,
1467                 .input        = { {
1468                         .type     = EM28XX_VMUX_TELEVISION,
1469                         .vmux     = TVP5150_COMPOSITE0,
1470                         .amux     = EM28XX_AMUX_VIDEO,
1471                 }, {
1472                         .type     = EM28XX_VMUX_COMPOSITE1,
1473                         .vmux     = TVP5150_COMPOSITE1,
1474                         .amux     = EM28XX_AMUX_LINE_IN,
1475                 }, {
1476                         .type     = EM28XX_VMUX_SVIDEO,
1477                         .vmux     = TVP5150_SVIDEO,
1478                         .amux     = EM28XX_AMUX_LINE_IN,
1479                 } },
1480         },
1481         [EM2880_BOARD_KWORLD_DVB_310U] = {
1482                 .name         = "KWorld DVB-T 310U",
1483                 .tuner_type   = TUNER_XC2028,
1484                 .tuner_gpio   = default_tuner_gpio,
1485                 .has_dvb      = 1,
1486                 .dvb_gpio     = default_digital,
1487                 .mts_firmware = 1,
1488                 .decoder      = EM28XX_TVP5150,
1489                 .input        = { {
1490                         .type     = EM28XX_VMUX_TELEVISION,
1491                         .vmux     = TVP5150_COMPOSITE0,
1492                         .amux     = EM28XX_AMUX_VIDEO,
1493                         .gpio     = default_analog,
1494                 }, {
1495                         .type     = EM28XX_VMUX_COMPOSITE1,
1496                         .vmux     = TVP5150_COMPOSITE1,
1497                         .amux     = EM28XX_AMUX_LINE_IN,
1498                         .gpio     = default_analog,
1499                 }, {    /* S-video has not been tested yet */
1500                         .type     = EM28XX_VMUX_SVIDEO,
1501                         .vmux     = TVP5150_SVIDEO,
1502                         .amux     = EM28XX_AMUX_LINE_IN,
1503                         .gpio     = default_analog,
1504                 } },
1505         },
1506         [EM2882_BOARD_KWORLD_ATSC_315U] = {
1507                 .name           = "KWorld ATSC 315U HDTV TV Box",
1508                 .valid          = EM28XX_BOARD_NOT_VALIDATED,
1509                 .tuner_type     = TUNER_THOMSON_DTT761X,
1510                 .tuner_gpio     = em2882_kworld_315u_tuner_gpio,
1511                 .tda9887_conf   = TDA9887_PRESENT,
1512                 .decoder        = EM28XX_SAA711X,
1513                 .has_dvb        = 1,
1514                 .dvb_gpio       = em2882_kworld_315u_digital,
1515                 .ir_codes       = RC_MAP_KWORLD_315U,
1516                 .xclk           = EM28XX_XCLK_FREQUENCY_12MHZ,
1517                 .i2c_speed      = EM28XX_I2C_CLK_WAIT_ENABLE,
1518                 /* Analog mode - still not ready */
1519                 /*.input        = { {
1520                         .type = EM28XX_VMUX_TELEVISION,
1521                         .vmux = SAA7115_COMPOSITE2,
1522                         .amux = EM28XX_AMUX_VIDEO,
1523                         .gpio = em2882_kworld_315u_analog,
1524                         .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1525                 }, {
1526                         .type = EM28XX_VMUX_COMPOSITE1,
1527                         .vmux = SAA7115_COMPOSITE0,
1528                         .amux = EM28XX_AMUX_LINE_IN,
1529                         .gpio = em2882_kworld_315u_analog1,
1530                         .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1531                 }, {
1532                         .type = EM28XX_VMUX_SVIDEO,
1533                         .vmux = SAA7115_SVIDEO3,
1534                         .amux = EM28XX_AMUX_LINE_IN,
1535                         .gpio = em2882_kworld_315u_analog1,
1536                         .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1537                 } }, */
1538         },
1539         [EM2880_BOARD_EMPIRE_DUAL_TV] = {
1540                 .name = "Empire dual TV",
1541                 .tuner_type = TUNER_XC2028,
1542                 .tuner_gpio = default_tuner_gpio,
1543                 .has_dvb = 1,
1544                 .dvb_gpio = default_digital,
1545                 .mts_firmware = 1,
1546                 .decoder = EM28XX_TVP5150,
1547                 .input = { {
1548                         .type = EM28XX_VMUX_TELEVISION,
1549                         .vmux = TVP5150_COMPOSITE0,
1550                         .amux = EM28XX_AMUX_VIDEO,
1551                         .gpio = default_analog,
1552                 }, {
1553                         .type = EM28XX_VMUX_COMPOSITE1,
1554                         .vmux = TVP5150_COMPOSITE1,
1555                         .amux = EM28XX_AMUX_LINE_IN,
1556                         .gpio = default_analog,
1557                 }, {
1558                         .type = EM28XX_VMUX_SVIDEO,
1559                         .vmux = TVP5150_SVIDEO,
1560                         .amux = EM28XX_AMUX_LINE_IN,
1561                         .gpio = default_analog,
1562                 } },
1563         },
1564         [EM2881_BOARD_DNT_DA2_HYBRID] = {
1565                 .name         = "DNT DA2 Hybrid",
1566                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
1567                 .tuner_type   = TUNER_XC2028,
1568                 .tuner_gpio   = default_tuner_gpio,
1569                 .decoder      = EM28XX_TVP5150,
1570                 .input        = { {
1571                         .type     = EM28XX_VMUX_TELEVISION,
1572                         .vmux     = TVP5150_COMPOSITE0,
1573                         .amux     = EM28XX_AMUX_VIDEO,
1574                         .gpio     = default_analog,
1575                 }, {
1576                         .type     = EM28XX_VMUX_COMPOSITE1,
1577                         .vmux     = TVP5150_COMPOSITE1,
1578                         .amux     = EM28XX_AMUX_LINE_IN,
1579                         .gpio     = default_analog,
1580                 }, {
1581                         .type     = EM28XX_VMUX_SVIDEO,
1582                         .vmux     = TVP5150_SVIDEO,
1583                         .amux     = EM28XX_AMUX_LINE_IN,
1584                         .gpio     = default_analog,
1585                 } },
1586         },
1587         [EM2881_BOARD_PINNACLE_HYBRID_PRO] = {
1588                 .name         = "Pinnacle Hybrid Pro",
1589                 .tuner_type   = TUNER_XC2028,
1590                 .tuner_gpio   = default_tuner_gpio,
1591                 .decoder      = EM28XX_TVP5150,
1592                 .has_dvb      = 1,
1593                 .dvb_gpio     = pinnacle_hybrid_pro_digital,
1594                 .input        = { {
1595                         .type     = EM28XX_VMUX_TELEVISION,
1596                         .vmux     = TVP5150_COMPOSITE0,
1597                         .amux     = EM28XX_AMUX_VIDEO,
1598                         .gpio     = pinnacle_hybrid_pro_analog,
1599                 }, {
1600                         .type     = EM28XX_VMUX_COMPOSITE1,
1601                         .vmux     = TVP5150_COMPOSITE1,
1602                         .amux     = EM28XX_AMUX_LINE_IN,
1603                         .gpio     = pinnacle_hybrid_pro_analog,
1604                 }, {
1605                         .type     = EM28XX_VMUX_SVIDEO,
1606                         .vmux     = TVP5150_SVIDEO,
1607                         .amux     = EM28XX_AMUX_LINE_IN,
1608                         .gpio     = pinnacle_hybrid_pro_analog,
1609                 } },
1610         },
1611         [EM2882_BOARD_PINNACLE_HYBRID_PRO_330E] = {
1612                 .name         = "Pinnacle Hybrid Pro (330e)",
1613                 .tuner_type   = TUNER_XC2028,
1614                 .tuner_gpio   = default_tuner_gpio,
1615                 .mts_firmware = 1,
1616                 .has_dvb      = 1,
1617                 .dvb_gpio     = hauppauge_wintv_hvr_900R2_digital,
1618                 .ir_codes     = RC_MAP_PINNACLE_PCTV_HD,
1619                 .decoder      = EM28XX_TVP5150,
1620                 .input        = { {
1621                         .type     = EM28XX_VMUX_TELEVISION,
1622                         .vmux     = TVP5150_COMPOSITE0,
1623                         .amux     = EM28XX_AMUX_VIDEO,
1624                         .gpio     = hauppauge_wintv_hvr_900_analog,
1625                 }, {
1626                         .type     = EM28XX_VMUX_COMPOSITE1,
1627                         .vmux     = TVP5150_COMPOSITE1,
1628                         .amux     = EM28XX_AMUX_LINE_IN,
1629                         .gpio     = hauppauge_wintv_hvr_900_analog,
1630                 }, {
1631                         .type     = EM28XX_VMUX_SVIDEO,
1632                         .vmux     = TVP5150_SVIDEO,
1633                         .amux     = EM28XX_AMUX_LINE_IN,
1634                         .gpio     = hauppauge_wintv_hvr_900_analog,
1635                 } },
1636         },
1637         [EM2882_BOARD_KWORLD_VS_DVBT] = {
1638                 .name         = "Kworld VS-DVB-T 323UR",
1639                 .tuner_type   = TUNER_XC2028,
1640                 .tuner_gpio   = default_tuner_gpio,
1641                 .decoder      = EM28XX_TVP5150,
1642                 .mts_firmware = 1,
1643                 .has_dvb      = 1,
1644                 .dvb_gpio     = kworld_330u_digital,
1645                 .xclk         = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
1646                 .ir_codes     = RC_MAP_KWORLD_315U,
1647                 .input        = { {
1648                         .type     = EM28XX_VMUX_TELEVISION,
1649                         .vmux     = TVP5150_COMPOSITE0,
1650                         .amux     = EM28XX_AMUX_VIDEO,
1651                 }, {
1652                         .type     = EM28XX_VMUX_COMPOSITE1,
1653                         .vmux     = TVP5150_COMPOSITE1,
1654                         .amux     = EM28XX_AMUX_LINE_IN,
1655                 }, {
1656                         .type     = EM28XX_VMUX_SVIDEO,
1657                         .vmux     = TVP5150_SVIDEO,
1658                         .amux     = EM28XX_AMUX_LINE_IN,
1659                 } },
1660         },
1661         [EM2882_BOARD_TERRATEC_HYBRID_XS] = {
1662                 .name         = "Terratec Cinnergy Hybrid T USB XS (em2882)",
1663                 .tuner_type   = TUNER_XC2028,
1664                 .tuner_gpio   = default_tuner_gpio,
1665                 .mts_firmware = 1,
1666                 .decoder      = EM28XX_TVP5150,
1667                 .has_dvb      = 1,
1668                 .dvb_gpio     = hauppauge_wintv_hvr_900_digital,
1669                 .ir_codes     = RC_MAP_TERRATEC_CINERGY_XS,
1670                 .xclk         = EM28XX_XCLK_FREQUENCY_12MHZ,
1671                 .input        = { {
1672                         .type     = EM28XX_VMUX_TELEVISION,
1673                         .vmux     = TVP5150_COMPOSITE0,
1674                         .amux     = EM28XX_AMUX_VIDEO,
1675                         .gpio     = hauppauge_wintv_hvr_900_analog,
1676                 }, {
1677                         .type     = EM28XX_VMUX_COMPOSITE1,
1678                         .vmux     = TVP5150_COMPOSITE1,
1679                         .amux     = EM28XX_AMUX_LINE_IN,
1680                         .gpio     = hauppauge_wintv_hvr_900_analog,
1681                 }, {
1682                         .type     = EM28XX_VMUX_SVIDEO,
1683                         .vmux     = TVP5150_SVIDEO,
1684                         .amux     = EM28XX_AMUX_LINE_IN,
1685                         .gpio     = hauppauge_wintv_hvr_900_analog,
1686                 } },
1687         },
1688         [EM2882_BOARD_DIKOM_DK300] = {
1689                 .name         = "Dikom DK300",
1690                 .tuner_type   = TUNER_XC2028,
1691                 .tuner_gpio   = default_tuner_gpio,
1692                 .decoder      = EM28XX_TVP5150,
1693                 .mts_firmware = 1,
1694                 .has_dvb      = 1,
1695                 .dvb_gpio     = dikom_dk300_digital,
1696                 .input        = { {
1697                         .type     = EM28XX_VMUX_TELEVISION,
1698                         .vmux     = TVP5150_COMPOSITE0,
1699                         .amux     = EM28XX_AMUX_VIDEO,
1700                         .gpio     = default_analog,
1701                 } },
1702         },
1703         [EM2883_BOARD_KWORLD_HYBRID_330U] = {
1704                 .name         = "Kworld PlusTV HD Hybrid 330",
1705                 .tuner_type   = TUNER_XC2028,
1706                 .tuner_gpio   = default_tuner_gpio,
1707                 .decoder      = EM28XX_TVP5150,
1708                 .mts_firmware = 1,
1709                 .has_dvb      = 1,
1710                 .dvb_gpio     = kworld_330u_digital,
1711                 .xclk             = EM28XX_XCLK_FREQUENCY_12MHZ,
1712                 .i2c_speed        = EM28XX_I2C_CLK_WAIT_ENABLE |
1713                                     EM28XX_I2C_EEPROM_ON_BOARD |
1714                                     EM28XX_I2C_EEPROM_KEY_VALID,
1715                 .input        = { {
1716                         .type     = EM28XX_VMUX_TELEVISION,
1717                         .vmux     = TVP5150_COMPOSITE0,
1718                         .amux     = EM28XX_AMUX_VIDEO,
1719                         .gpio     = kworld_330u_analog,
1720                         .aout     = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1721                 }, {
1722                         .type     = EM28XX_VMUX_COMPOSITE1,
1723                         .vmux     = TVP5150_COMPOSITE1,
1724                         .amux     = EM28XX_AMUX_LINE_IN,
1725                         .gpio     = kworld_330u_analog,
1726                         .aout     = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1727                 }, {
1728                         .type     = EM28XX_VMUX_SVIDEO,
1729                         .vmux     = TVP5150_SVIDEO,
1730                         .amux     = EM28XX_AMUX_LINE_IN,
1731                         .gpio     = kworld_330u_analog,
1732                 } },
1733         },
1734         [EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = {
1735                 .name         = "Compro VideoMate ForYou/Stereo",
1736                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
1737                 .tvaudio_addr = 0xb0,
1738                 .tda9887_conf = TDA9887_PRESENT,
1739                 .decoder      = EM28XX_TVP5150,
1740                 .adecoder     = EM28XX_TVAUDIO,
1741                 .mute_gpio    = compro_mute_gpio,
1742                 .input        = { {
1743                         .type     = EM28XX_VMUX_TELEVISION,
1744                         .vmux     = TVP5150_COMPOSITE0,
1745                         .amux     = EM28XX_AMUX_VIDEO,
1746                         .gpio     = compro_unmute_tv_gpio,
1747                 }, {
1748                         .type     = EM28XX_VMUX_SVIDEO,
1749                         .vmux     = TVP5150_SVIDEO,
1750                         .amux     = EM28XX_AMUX_LINE_IN,
1751                         .gpio     = compro_unmute_svid_gpio,
1752                 } },
1753         },
1754         [EM2860_BOARD_KAIOMY_TVNPC_U2] = {
1755                 .name         = "Kaiomy TVnPC U2",
1756                 .vchannels    = 3,
1757                 .tuner_type   = TUNER_XC2028,
1758                 .tuner_addr   = 0x61,
1759                 .mts_firmware = 1,
1760                 .decoder      = EM28XX_TVP5150,
1761                 .tuner_gpio   = default_tuner_gpio,
1762                 .ir_codes     = RC_MAP_KAIOMY,
1763                 .input          = { {
1764                         .type     = EM28XX_VMUX_TELEVISION,
1765                         .vmux     = TVP5150_COMPOSITE0,
1766                         .amux     = EM28XX_AMUX_VIDEO,
1767
1768                 }, {
1769                         .type     = EM28XX_VMUX_COMPOSITE1,
1770                         .vmux     = TVP5150_COMPOSITE1,
1771                         .amux     = EM28XX_AMUX_LINE_IN,
1772                 }, {
1773                         .type     = EM28XX_VMUX_SVIDEO,
1774                         .vmux     = TVP5150_SVIDEO,
1775                         .amux     = EM28XX_AMUX_LINE_IN,
1776                 } },
1777                 .radio          = {
1778                         .type     = EM28XX_RADIO,
1779                         .amux     = EM28XX_AMUX_LINE_IN,
1780                 }
1781         },
1782         [EM2860_BOARD_EASYCAP] = {
1783                 .name         = "Easy Cap Capture DC-60",
1784                 .vchannels    = 2,
1785                 .tuner_type   = TUNER_ABSENT,
1786                 .decoder      = EM28XX_SAA711X,
1787                 .input           = { {
1788                         .type     = EM28XX_VMUX_COMPOSITE1,
1789                         .vmux     = SAA7115_COMPOSITE0,
1790                         .amux     = EM28XX_AMUX_LINE_IN,
1791                 }, {
1792                         .type     = EM28XX_VMUX_SVIDEO,
1793                         .vmux     = SAA7115_SVIDEO3,
1794                         .amux     = EM28XX_AMUX_LINE_IN,
1795                 } },
1796         },
1797         [EM2820_BOARD_IODATA_GVMVP_SZ] = {
1798                 .name       = "IO-DATA GV-MVP/SZ",
1799                 .tuner_type   = TUNER_PHILIPS_FM1236_MK3,
1800                 .tuner_gpio   = default_tuner_gpio,
1801                 .tda9887_conf = TDA9887_PRESENT,
1802                 .decoder      = EM28XX_TVP5150,
1803                 .input        = { {
1804                         .type     = EM28XX_VMUX_TELEVISION,
1805                         .vmux     = TVP5150_COMPOSITE0,
1806                         .amux     = EM28XX_AMUX_VIDEO,
1807                 }, { /* Composite has not been tested yet */
1808                         .type     = EM28XX_VMUX_COMPOSITE1,
1809                         .vmux     = TVP5150_COMPOSITE1,
1810                         .amux     = EM28XX_AMUX_VIDEO,
1811                 }, { /* S-video has not been tested yet */
1812                         .type     = EM28XX_VMUX_SVIDEO,
1813                         .vmux     = TVP5150_SVIDEO,
1814                         .amux     = EM28XX_AMUX_VIDEO,
1815                 } },
1816         },
1817         [EM2860_BOARD_TERRATEC_GRABBY] = {
1818                 .name            = "Terratec Grabby",
1819                 .vchannels       = 2,
1820                 .tuner_type      = TUNER_ABSENT,
1821                 .decoder         = EM28XX_SAA711X,
1822                 .xclk            = EM28XX_XCLK_FREQUENCY_12MHZ,
1823                 .input           = { {
1824                         .type     = EM28XX_VMUX_COMPOSITE1,
1825                         .vmux     = SAA7115_COMPOSITE0,
1826                         .amux     = EM28XX_AMUX_LINE_IN,
1827                 }, {
1828                         .type     = EM28XX_VMUX_SVIDEO,
1829                         .vmux     = SAA7115_SVIDEO3,
1830                         .amux     = EM28XX_AMUX_LINE_IN,
1831                 } },
1832         },
1833         [EM2860_BOARD_TERRATEC_AV350] = {
1834                 .name            = "Terratec AV350",
1835                 .vchannels       = 2,
1836                 .tuner_type      = TUNER_ABSENT,
1837                 .decoder         = EM28XX_TVP5150,
1838                 .xclk            = EM28XX_XCLK_FREQUENCY_12MHZ,
1839                 .mute_gpio       = terratec_av350_mute_gpio,
1840                 .input           = { {
1841                         .type     = EM28XX_VMUX_COMPOSITE1,
1842                         .vmux     = TVP5150_COMPOSITE1,
1843                         .amux     = EM28XX_AUDIO_SRC_LINE,
1844                         .gpio     = terratec_av350_unmute_gpio,
1845
1846                 }, {
1847                         .type     = EM28XX_VMUX_SVIDEO,
1848                         .vmux     = TVP5150_SVIDEO,
1849                         .amux     = EM28XX_AUDIO_SRC_LINE,
1850                         .gpio     = terratec_av350_unmute_gpio,
1851                 } },
1852         },
1853
1854         [EM2860_BOARD_ELGATO_VIDEO_CAPTURE] = {
1855                 .name         = "Elgato Video Capture",
1856                 .decoder      = EM28XX_SAA711X,
1857                 .tuner_type   = TUNER_ABSENT,   /* Capture only device */
1858                 .input        = { {
1859                         .type  = EM28XX_VMUX_COMPOSITE1,
1860                         .vmux  = SAA7115_COMPOSITE0,
1861                         .amux  = EM28XX_AMUX_LINE_IN,
1862                 }, {
1863                         .type  = EM28XX_VMUX_SVIDEO,
1864                         .vmux  = SAA7115_SVIDEO3,
1865                         .amux  = EM28XX_AMUX_LINE_IN,
1866                 } },
1867         },
1868
1869         [EM2882_BOARD_EVGA_INDTUBE] = {
1870                 .name         = "Evga inDtube",
1871                 .tuner_type   = TUNER_XC2028,
1872                 .tuner_gpio   = default_tuner_gpio,
1873                 .decoder      = EM28XX_TVP5150,
1874                 .xclk         = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
1875                 .mts_firmware = 1,
1876                 .has_dvb      = 1,
1877                 .dvb_gpio     = evga_indtube_digital,
1878                 .ir_codes     = RC_MAP_EVGA_INDTUBE,
1879                 .input        = { {
1880                         .type     = EM28XX_VMUX_TELEVISION,
1881                         .vmux     = TVP5150_COMPOSITE0,
1882                         .amux     = EM28XX_AMUX_VIDEO,
1883                         .gpio     = evga_indtube_analog,
1884                 }, {
1885                         .type     = EM28XX_VMUX_COMPOSITE1,
1886                         .vmux     = TVP5150_COMPOSITE1,
1887                         .amux     = EM28XX_AMUX_LINE_IN,
1888                         .gpio     = evga_indtube_analog,
1889                 }, {
1890                         .type     = EM28XX_VMUX_SVIDEO,
1891                         .vmux     = TVP5150_SVIDEO,
1892                         .amux     = EM28XX_AMUX_LINE_IN,
1893                         .gpio     = evga_indtube_analog,
1894                 } },
1895         },
1896         /* eb1a:2868 Empia EM2870 + Philips CU1216L NIM (Philips TDA10023 +
1897            Infineon TUA6034) */
1898         [EM2870_BOARD_REDDO_DVB_C_USB_BOX] = {
1899                 .name          = "Reddo DVB-C USB TV Box",
1900                 .tuner_type    = TUNER_ABSENT,
1901                 .tuner_gpio    = reddo_dvb_c_usb_box,
1902                 .has_dvb       = 1,
1903         },
1904         /* 1b80:a340 - Empia EM2870, NXP TDA18271HD and LG DT3304, sold
1905          * initially as the KWorld PlusTV 340U, then as the UB435-Q.
1906          * Early variants have a TDA18271HD/C1, later ones a TDA18271HD/C2 */
1907         [EM2870_BOARD_KWORLD_A340] = {
1908                 .name       = "KWorld PlusTV 340U or UB435-Q (ATSC)",
1909                 .tuner_type = TUNER_ABSENT,     /* Digital-only TDA18271HD */
1910                 .has_dvb    = 1,
1911                 .dvb_gpio   = kworld_a340_digital,
1912                 .tuner_gpio = default_tuner_gpio,
1913         },
1914         /* 2013:024f PCTV nanoStick T2 290e.
1915          * Empia EM28174, Sony CXD2820R and NXP TDA18271HD/C2 */
1916         [EM28174_BOARD_PCTV_290E] = {
1917                 .name          = "PCTV nanoStick T2 290e",
1918                 .i2c_speed      = EM2874_I2C_SECONDARY_BUS_SELECT |
1919                         EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ,
1920                 .tuner_type    = TUNER_ABSENT,
1921                 .tuner_gpio    = pctv_290e,
1922                 .has_dvb       = 1,
1923                 .ir_codes      = RC_MAP_PINNACLE_PCTV_HD,
1924         },
1925         /* 2013:024f PCTV DVB-S2 Stick 460e
1926          * Empia EM28174, NXP TDA10071, Conexant CX24118A and Allegro A8293 */
1927         [EM28174_BOARD_PCTV_460E] = {
1928                 .i2c_speed     = EM2874_I2C_SECONDARY_BUS_SELECT |
1929                         EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ,
1930                 .name          = "PCTV DVB-S2 Stick (460e)",
1931                 .tuner_type    = TUNER_ABSENT,
1932                 .tuner_gpio    = pctv_460e,
1933                 .has_dvb       = 1,
1934                 .ir_codes      = RC_MAP_PINNACLE_PCTV_HD,
1935         },
1936         /* eb1a:5006 Honestech VIDBOX NW03
1937          * Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner */
1938         [EM2860_BOARD_HT_VIDBOX_NW03] = {
1939                 .name                = "Honestech Vidbox NW03",
1940                 .tuner_type          = TUNER_ABSENT,
1941                 .decoder             = EM28XX_SAA711X,
1942                 .input               = { {
1943                         .type     = EM28XX_VMUX_COMPOSITE1,
1944                         .vmux     = SAA7115_COMPOSITE0,
1945                         .amux     = EM28XX_AMUX_LINE_IN,
1946                 }, {
1947                         .type     = EM28XX_VMUX_SVIDEO,
1948                         .vmux     = SAA7115_SVIDEO3,  /* S-VIDEO needs confirming */
1949                         .amux     = EM28XX_AMUX_LINE_IN,
1950                 } },
1951         },
1952         /* 1b80:e425 MaxMedia UB425-TC
1953          * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2 */
1954         [EM2874_BOARD_MAXMEDIA_UB425_TC] = {
1955                 .name          = "MaxMedia UB425-TC",
1956                 .tuner_type    = TUNER_ABSENT,
1957                 .tuner_gpio    = maxmedia_ub425_tc,
1958                 .has_dvb       = 1,
1959                 .i2c_speed     = EM2874_I2C_SECONDARY_BUS_SELECT |
1960                                 EM28XX_I2C_CLK_WAIT_ENABLE |
1961                                 EM28XX_I2C_FREQ_400_KHZ,
1962         },
1963         /* 2304:0242 PCTV QuatroStick (510e)
1964          * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */
1965         [EM2884_BOARD_PCTV_510E] = {
1966                 .name          = "PCTV QuatroStick (510e)",
1967                 .tuner_type    = TUNER_ABSENT,
1968                 .tuner_gpio    = pctv_510e,
1969                 .has_dvb       = 1,
1970                 .ir_codes      = RC_MAP_PINNACLE_PCTV_HD,
1971                 .i2c_speed     = EM2874_I2C_SECONDARY_BUS_SELECT |
1972                                 EM28XX_I2C_CLK_WAIT_ENABLE |
1973                                 EM28XX_I2C_FREQ_400_KHZ,
1974         },
1975         /* 2013:0251 PCTV QuatroStick nano (520e)
1976          * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */
1977         [EM2884_BOARD_PCTV_520E] = {
1978                 .name          = "PCTV QuatroStick nano (520e)",
1979                 .tuner_type    = TUNER_ABSENT,
1980                 .tuner_gpio    = pctv_520e,
1981                 .has_dvb       = 1,
1982                 .ir_codes      = RC_MAP_PINNACLE_PCTV_HD,
1983                 .i2c_speed     = EM2874_I2C_SECONDARY_BUS_SELECT |
1984                                 EM28XX_I2C_CLK_WAIT_ENABLE |
1985                                 EM28XX_I2C_FREQ_400_KHZ,
1986         },
1987 };
1988 const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
1989
1990 /* table of devices that work with this driver */
1991 struct usb_device_id em28xx_id_table[] = {
1992         { USB_DEVICE(0xeb1a, 0x2750),
1993                         .driver_info = EM2750_BOARD_UNKNOWN },
1994         { USB_DEVICE(0xeb1a, 0x2751),
1995                         .driver_info = EM2750_BOARD_UNKNOWN },
1996         { USB_DEVICE(0xeb1a, 0x2800),
1997                         .driver_info = EM2800_BOARD_UNKNOWN },
1998         { USB_DEVICE(0xeb1a, 0x2710),
1999                         .driver_info = EM2820_BOARD_UNKNOWN },
2000         { USB_DEVICE(0xeb1a, 0x2820),
2001                         .driver_info = EM2820_BOARD_UNKNOWN },
2002         { USB_DEVICE(0xeb1a, 0x2821),
2003                         .driver_info = EM2820_BOARD_UNKNOWN },
2004         { USB_DEVICE(0xeb1a, 0x2860),
2005                         .driver_info = EM2820_BOARD_UNKNOWN },
2006         { USB_DEVICE(0xeb1a, 0x2861),
2007                         .driver_info = EM2820_BOARD_UNKNOWN },
2008         { USB_DEVICE(0xeb1a, 0x2862),
2009                         .driver_info = EM2820_BOARD_UNKNOWN },
2010         { USB_DEVICE(0xeb1a, 0x2863),
2011                         .driver_info = EM2820_BOARD_UNKNOWN },
2012         { USB_DEVICE(0xeb1a, 0x2870),
2013                         .driver_info = EM2820_BOARD_UNKNOWN },
2014         { USB_DEVICE(0xeb1a, 0x2881),
2015                         .driver_info = EM2820_BOARD_UNKNOWN },
2016         { USB_DEVICE(0xeb1a, 0x2883),
2017                         .driver_info = EM2820_BOARD_UNKNOWN },
2018         { USB_DEVICE(0xeb1a, 0x2868),
2019                         .driver_info = EM2820_BOARD_UNKNOWN },
2020         { USB_DEVICE(0xeb1a, 0x2875),
2021                         .driver_info = EM2820_BOARD_UNKNOWN },
2022         { USB_DEVICE(0xeb1a, 0xe300),
2023                         .driver_info = EM2861_BOARD_KWORLD_PVRTV_300U },
2024         { USB_DEVICE(0xeb1a, 0xe303),
2025                         .driver_info = EM2860_BOARD_KAIOMY_TVNPC_U2 },
2026         { USB_DEVICE(0xeb1a, 0xe305),
2027                         .driver_info = EM2880_BOARD_KWORLD_DVB_305U },
2028         { USB_DEVICE(0xeb1a, 0xe310),
2029                         .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD },
2030         { USB_DEVICE(0xeb1a, 0xa313),
2031                 .driver_info = EM2882_BOARD_KWORLD_ATSC_315U },
2032         { USB_DEVICE(0xeb1a, 0xa316),
2033                         .driver_info = EM2883_BOARD_KWORLD_HYBRID_330U },
2034         { USB_DEVICE(0xeb1a, 0xe320),
2035                         .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II },
2036         { USB_DEVICE(0xeb1a, 0xe323),
2037                         .driver_info = EM2882_BOARD_KWORLD_VS_DVBT },
2038         { USB_DEVICE(0xeb1a, 0xe350),
2039                         .driver_info = EM2870_BOARD_KWORLD_350U },
2040         { USB_DEVICE(0xeb1a, 0xe355),
2041                         .driver_info = EM2870_BOARD_KWORLD_355U },
2042         { USB_DEVICE(0xeb1a, 0x2801),
2043                         .driver_info = EM2800_BOARD_GRABBEEX_USB2800 },
2044         { USB_DEVICE(0xeb1a, 0xe357),
2045                         .driver_info = EM2870_BOARD_KWORLD_355U },
2046         { USB_DEVICE(0xeb1a, 0xe359),
2047                         .driver_info = EM2870_BOARD_KWORLD_355U },
2048         { USB_DEVICE(0x1b80, 0xe302),
2049                         .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kaiser Baas Video to DVD maker */
2050         { USB_DEVICE(0x1b80, 0xe304),
2051                         .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kworld DVD Maker 2 */
2052         { USB_DEVICE(0x0ccd, 0x0036),
2053                         .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 },
2054         { USB_DEVICE(0x0ccd, 0x004c),
2055                         .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS_FR },
2056         { USB_DEVICE(0x0ccd, 0x004f),
2057                         .driver_info = EM2860_BOARD_TERRATEC_HYBRID_XS },
2058         { USB_DEVICE(0x0ccd, 0x005e),
2059                         .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
2060         { USB_DEVICE(0x0ccd, 0x0042),
2061                         .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
2062         { USB_DEVICE(0x0ccd, 0x0043),
2063                         .driver_info = EM2870_BOARD_TERRATEC_XS },
2064         { USB_DEVICE(0x0ccd, 0x008e),   /* Cinergy HTC USB XS Rev. 1 */
2065                         .driver_info = EM2884_BOARD_TERRATEC_H5 },
2066         { USB_DEVICE(0x0ccd, 0x00ac),   /* Cinergy HTC USB XS Rev. 2 */
2067                         .driver_info = EM2884_BOARD_TERRATEC_H5 },
2068         { USB_DEVICE(0x0ccd, 0x10a2),   /* H5 Rev. 1 */
2069                         .driver_info = EM2884_BOARD_TERRATEC_H5 },
2070         { USB_DEVICE(0x0ccd, 0x10ad),   /* H5 Rev. 2 */
2071                         .driver_info = EM2884_BOARD_TERRATEC_H5 },
2072         { USB_DEVICE(0x0ccd, 0x0084),
2073                         .driver_info = EM2860_BOARD_TERRATEC_AV350 },
2074         { USB_DEVICE(0x0ccd, 0x0096),
2075                         .driver_info = EM2860_BOARD_TERRATEC_GRABBY },
2076         { USB_DEVICE(0x0ccd, 0x10AF),
2077                         .driver_info = EM2860_BOARD_TERRATEC_GRABBY },
2078         { USB_DEVICE(0x0ccd, 0x00b2),
2079                         .driver_info = EM2884_BOARD_CINERGY_HTC_STICK },
2080         { USB_DEVICE(0x0fd9, 0x0033),
2081                         .driver_info = EM2860_BOARD_ELGATO_VIDEO_CAPTURE},
2082         { USB_DEVICE(0x185b, 0x2870),
2083                         .driver_info = EM2870_BOARD_COMPRO_VIDEOMATE },
2084         { USB_DEVICE(0x185b, 0x2041),
2085                         .driver_info = EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU },
2086         { USB_DEVICE(0x2040, 0x4200),
2087                         .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
2088         { USB_DEVICE(0x2040, 0x4201),
2089                         .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
2090         { USB_DEVICE(0x2040, 0x6500),
2091                         .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 },
2092         { USB_DEVICE(0x2040, 0x6502),
2093                         .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 },
2094         { USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */
2095                         .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
2096         { USB_DEVICE(0x2040, 0x6517), /* HP  HVR-950 */
2097                         .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
2098         { USB_DEVICE(0x2040, 0x651b), /* RP  HVR-950 */
2099                         .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
2100         { USB_DEVICE(0x2040, 0x651f),
2101                         .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 },
2102         { USB_DEVICE(0x0438, 0xb002),
2103                         .driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 },
2104         { USB_DEVICE(0x2001, 0xf112),
2105                         .driver_info = EM2820_BOARD_DLINK_USB_TV },
2106         { USB_DEVICE(0x2304, 0x0207),
2107                         .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
2108         { USB_DEVICE(0x2304, 0x0208),
2109                         .driver_info = EM2820_BOARD_PINNACLE_USB_2 },
2110         { USB_DEVICE(0x2304, 0x021a),
2111                         .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
2112         { USB_DEVICE(0x2304, 0x0226),
2113                         .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO_330E },
2114         { USB_DEVICE(0x2304, 0x0227),
2115                         .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO },
2116         { USB_DEVICE(0x0413, 0x6023),
2117                         .driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII },
2118         { USB_DEVICE(0x093b, 0xa003),
2119                        .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
2120         { USB_DEVICE(0x093b, 0xa005),
2121                         .driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U },
2122         { USB_DEVICE(0x04bb, 0x0515),
2123                         .driver_info = EM2820_BOARD_IODATA_GVMVP_SZ },
2124         { USB_DEVICE(0xeb1a, 0x50a6),
2125                         .driver_info = EM2860_BOARD_GADMEI_UTV330 },
2126         { USB_DEVICE(0x1b80, 0xa340),
2127                         .driver_info = EM2870_BOARD_KWORLD_A340 },
2128         { USB_DEVICE(0x2013, 0x024f),
2129                         .driver_info = EM28174_BOARD_PCTV_290E },
2130         { USB_DEVICE(0x2013, 0x024c),
2131                         .driver_info = EM28174_BOARD_PCTV_460E },
2132         { USB_DEVICE(0x2040, 0x1605),
2133                         .driver_info = EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C },
2134         { USB_DEVICE(0xeb1a, 0x5006),
2135                         .driver_info = EM2860_BOARD_HT_VIDBOX_NW03 },
2136         { USB_DEVICE(0x1b80, 0xe309), /* Sveon STV40 */
2137                         .driver_info = EM2860_BOARD_EASYCAP },
2138         { USB_DEVICE(0x1b80, 0xe425),
2139                         .driver_info = EM2874_BOARD_MAXMEDIA_UB425_TC },
2140         { USB_DEVICE(0x2304, 0x0242),
2141                         .driver_info = EM2884_BOARD_PCTV_510E },
2142         { USB_DEVICE(0x2013, 0x0251),
2143                         .driver_info = EM2884_BOARD_PCTV_520E },
2144         { },
2145 };
2146 MODULE_DEVICE_TABLE(usb, em28xx_id_table);
2147
2148 /*
2149  * EEPROM hash table for devices with generic USB IDs
2150  */
2151 static struct em28xx_hash_table em28xx_eeprom_hash[] = {
2152         /* P/N: SA 60002070465 Tuner: TVF7533-MF */
2153         {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF},
2154         {0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF},
2155         {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028},
2156         {0x166a0441, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028},
2157         {0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028},
2158         {0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028},
2159         {0x63f653bd, EM2870_BOARD_REDDO_DVB_C_USB_BOX, TUNER_ABSENT},
2160         {0x4e913442, EM2882_BOARD_DIKOM_DK300, TUNER_XC2028},
2161 };
2162
2163 /* I2C devicelist hash table for devices with generic USB IDs */
2164 static struct em28xx_hash_table em28xx_i2c_hash[] = {
2165         {0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC},
2166         {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC},
2167         {0x1ba50080, EM2860_BOARD_SAA711X_REFERENCE_DESIGN, TUNER_ABSENT},
2168         {0x77800080, EM2860_BOARD_TVP5150_REFERENCE_DESIGN, TUNER_ABSENT},
2169         {0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC},
2170         {0x4ba50080, EM2861_BOARD_GADMEI_UTV330PLUS, TUNER_TNF_5335MF},
2171         {0x6b800080, EM2874_BOARD_LEADERSHIP_ISDBT, TUNER_ABSENT},
2172 };
2173
2174 /* I2C possible address to saa7115, tvp5150, msp3400, tvaudio */
2175 static unsigned short saa711x_addrs[] = {
2176         0x4a >> 1, 0x48 >> 1,   /* SAA7111, SAA7111A and SAA7113 */
2177         0x42 >> 1, 0x40 >> 1,   /* SAA7114, SAA7115 and SAA7118 */
2178         I2C_CLIENT_END };
2179
2180 static unsigned short tvp5150_addrs[] = {
2181         0xb8 >> 1,
2182         0xba >> 1,
2183         I2C_CLIENT_END
2184 };
2185
2186 static unsigned short msp3400_addrs[] = {
2187         0x80 >> 1,
2188         0x88 >> 1,
2189         I2C_CLIENT_END
2190 };
2191
2192 int em28xx_tuner_callback(void *ptr, int component, int command, int arg)
2193 {
2194         int rc = 0;
2195         struct em28xx *dev = ptr;
2196
2197         if (dev->tuner_type != TUNER_XC2028 && dev->tuner_type != TUNER_XC5000)
2198                 return 0;
2199
2200         if (command != XC2028_TUNER_RESET && command != XC5000_TUNER_RESET)
2201                 return 0;
2202
2203         rc = em28xx_gpio_set(dev, dev->board.tuner_gpio);
2204
2205         return rc;
2206 }
2207 EXPORT_SYMBOL_GPL(em28xx_tuner_callback);
2208
2209 static inline void em28xx_set_model(struct em28xx *dev)
2210 {
2211         memcpy(&dev->board, &em28xx_boards[dev->model], sizeof(dev->board));
2212
2213         /* Those are the default values for the majority of boards
2214            Use those values if not specified otherwise at boards entry
2215          */
2216         if (!dev->board.xclk)
2217                 dev->board.xclk = EM28XX_XCLK_IR_RC5_MODE |
2218                                   EM28XX_XCLK_FREQUENCY_12MHZ;
2219
2220         if (!dev->board.i2c_speed)
2221                 dev->board.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2222                                        EM28XX_I2C_FREQ_100_KHZ;
2223 }
2224
2225
2226 /* FIXME: Should be replaced by a proper mt9m111 driver */
2227 static int em28xx_initialize_mt9m111(struct em28xx *dev)
2228 {
2229         int i;
2230         unsigned char regs[][3] = {
2231                 { 0x0d, 0x00, 0x01, },  /* reset and use defaults */
2232                 { 0x0d, 0x00, 0x00, },
2233                 { 0x0a, 0x00, 0x21, },
2234                 { 0x21, 0x04, 0x00, },  /* full readout speed, no row/col skipping */
2235         };
2236
2237         for (i = 0; i < ARRAY_SIZE(regs); i++)
2238                 i2c_master_send(&dev->i2c_client, &regs[i][0], 3);
2239
2240         return 0;
2241 }
2242
2243
2244 /* FIXME: Should be replaced by a proper mt9m001 driver */
2245 static int em28xx_initialize_mt9m001(struct em28xx *dev)
2246 {
2247         int i;
2248         unsigned char regs[][3] = {
2249                 { 0x0d, 0x00, 0x01, },
2250                 { 0x0d, 0x00, 0x00, },
2251                 { 0x04, 0x05, 0x00, },  /* hres = 1280 */
2252                 { 0x03, 0x04, 0x00, },  /* vres = 1024 */
2253                 { 0x20, 0x11, 0x00, },
2254                 { 0x06, 0x00, 0x10, },
2255                 { 0x2b, 0x00, 0x24, },
2256                 { 0x2e, 0x00, 0x24, },
2257                 { 0x35, 0x00, 0x24, },
2258                 { 0x2d, 0x00, 0x20, },
2259                 { 0x2c, 0x00, 0x20, },
2260                 { 0x09, 0x0a, 0xd4, },
2261                 { 0x35, 0x00, 0x57, },
2262         };
2263
2264         for (i = 0; i < ARRAY_SIZE(regs); i++)
2265                 i2c_master_send(&dev->i2c_client, &regs[i][0], 3);
2266
2267         return 0;
2268 }
2269
2270 /* HINT method: webcam I2C chips
2271  *
2272  * This method works for webcams with Micron sensors
2273  */
2274 static int em28xx_hint_sensor(struct em28xx *dev)
2275 {
2276         int rc;
2277         char *sensor_name;
2278         unsigned char cmd;
2279         __be16 version_be;
2280         u16 version;
2281
2282         /* Micron sensor detection */
2283         dev->i2c_client.addr = 0xba >> 1;
2284         cmd = 0;
2285         i2c_master_send(&dev->i2c_client, &cmd, 1);
2286         rc = i2c_master_recv(&dev->i2c_client, (char *)&version_be, 2);
2287         if (rc != 2)
2288                 return -EINVAL;
2289
2290         version = be16_to_cpu(version_be);
2291         switch (version) {
2292         case 0x8232:            /* mt9v011 640x480 1.3 Mpix sensor */
2293         case 0x8243:            /* mt9v011 rev B 640x480 1.3 Mpix sensor */
2294                 dev->model = EM2820_BOARD_SILVERCREST_WEBCAM;
2295                 em28xx_set_model(dev);
2296
2297                 sensor_name = "mt9v011";
2298                 dev->em28xx_sensor = EM28XX_MT9V011;
2299                 dev->sensor_xres = 640;
2300                 dev->sensor_yres = 480;
2301                 /*
2302                  * FIXME: mt9v011 uses I2S speed as xtal clk - at least with
2303                  * the Silvercrest cam I have here for testing - for higher
2304                  * resolutions, a high clock cause horizontal artifacts, so we
2305                  * need to use a lower xclk frequency.
2306                  * Yet, it would be possible to adjust xclk depending on the
2307                  * desired resolution, since this affects directly the
2308                  * frame rate.
2309                  */
2310                 dev->board.xclk = EM28XX_XCLK_FREQUENCY_4_3MHZ;
2311                 dev->sensor_xtal = 4300000;
2312
2313                 /* probably means GRGB 16 bit bayer */
2314                 dev->vinmode = 0x0d;
2315                 dev->vinctl = 0x00;
2316
2317                 break;
2318
2319         case 0x143a:    /* MT9M111 as found in the ECS G200 */
2320                 dev->model = EM2750_BOARD_UNKNOWN;
2321                 em28xx_set_model(dev);
2322
2323                 sensor_name = "mt9m111";
2324                 dev->board.xclk = EM28XX_XCLK_FREQUENCY_48MHZ;
2325                 dev->em28xx_sensor = EM28XX_MT9M111;
2326                 em28xx_initialize_mt9m111(dev);
2327                 dev->sensor_xres = 640;
2328                 dev->sensor_yres = 512;
2329
2330                 dev->vinmode = 0x0a;
2331                 dev->vinctl = 0x00;
2332
2333                 break;
2334
2335         case 0x8431:
2336                 dev->model = EM2750_BOARD_UNKNOWN;
2337                 em28xx_set_model(dev);
2338
2339                 sensor_name = "mt9m001";
2340                 dev->em28xx_sensor = EM28XX_MT9M001;
2341                 em28xx_initialize_mt9m001(dev);
2342                 dev->sensor_xres = 1280;
2343                 dev->sensor_yres = 1024;
2344
2345                 /* probably means BGGR 16 bit bayer */
2346                 dev->vinmode = 0x0c;
2347                 dev->vinctl = 0x00;
2348
2349                 break;
2350         default:
2351                 printk("Unknown Micron Sensor 0x%04x\n", version);
2352                 return -EINVAL;
2353         }
2354
2355         /* Setup webcam defaults */
2356         em28xx_pre_card_setup(dev);
2357
2358         em28xx_errdev("Sensor is %s, using model %s entry.\n",
2359                       sensor_name, em28xx_boards[dev->model].name);
2360
2361         return 0;
2362 }
2363
2364 /* Since em28xx_pre_card_setup() requires a proper dev->model,
2365  * this won't work for boards with generic PCI IDs
2366  */
2367 static void em28xx_pre_card_setup(struct em28xx *dev)
2368 {
2369         /* Set the initial XCLK and I2C clock values based on the board
2370            definition */
2371         em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk & 0x7f);
2372         if (!dev->board.is_em2800)
2373                 em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed);
2374         msleep(50);
2375
2376         /* request some modules */
2377         switch (dev->model) {
2378         case EM2861_BOARD_PLEXTOR_PX_TV100U:
2379                 /* Sets the msp34xx I2S speed */
2380                 dev->i2s_speed = 2048000;
2381                 break;
2382         case EM2861_BOARD_KWORLD_PVRTV_300U:
2383         case EM2880_BOARD_KWORLD_DVB_305U:
2384                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x6d);
2385                 msleep(10);
2386                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x7d);
2387                 msleep(10);
2388                 break;
2389         case EM2870_BOARD_COMPRO_VIDEOMATE:
2390                 /* TODO: someone can do some cleanup here...
2391                          not everything's needed */
2392                 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
2393                 msleep(10);
2394                 em28xx_write_reg(dev, EM2880_R04_GPO, 0x01);
2395                 msleep(10);
2396                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
2397                 mdelay(70);
2398                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc);
2399                 mdelay(70);
2400                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xdc);
2401                 mdelay(70);
2402                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc);
2403                 mdelay(70);
2404                 break;
2405         case EM2870_BOARD_TERRATEC_XS_MT2060:
2406                 /* this device needs some gpio writes to get the DVB-T
2407                    demod work */
2408                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2409                 mdelay(70);
2410                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde);
2411                 mdelay(70);
2412                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2413                 mdelay(70);
2414                 break;
2415         case EM2870_BOARD_PINNACLE_PCTV_DVB:
2416                 /* this device needs some gpio writes to get the
2417                    DVB-T demod work */
2418                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2419                 mdelay(70);
2420                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde);
2421                 mdelay(70);
2422                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2423                 mdelay(70);
2424                 break;
2425         case EM2820_BOARD_GADMEI_UTV310:
2426         case EM2820_BOARD_MSI_VOX_USB_2:
2427                 /* enables audio for that devices */
2428                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
2429                 break;
2430
2431         case EM2882_BOARD_KWORLD_ATSC_315U:
2432                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
2433                 msleep(10);
2434                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2435                 msleep(10);
2436                 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
2437                 msleep(10);
2438                 em28xx_write_reg(dev, EM2880_R04_GPO, 0x08);
2439                 msleep(10);
2440                 break;
2441
2442         case EM2860_BOARD_KAIOMY_TVNPC_U2:
2443                 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1);
2444                 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
2445                 em28xx_write_regs(dev, 0x0d, "\x42", 1);
2446                 em28xx_write_regs(dev, 0x08, "\xfd", 1);
2447                 msleep(10);
2448                 em28xx_write_regs(dev, 0x08, "\xff", 1);
2449                 msleep(10);
2450                 em28xx_write_regs(dev, 0x08, "\x7f", 1);
2451                 msleep(10);
2452                 em28xx_write_regs(dev, 0x08, "\x6b", 1);
2453
2454                 break;
2455         case EM2860_BOARD_EASYCAP:
2456                 em28xx_write_regs(dev, 0x08, "\xf8", 1);
2457                 break;
2458
2459         case EM2820_BOARD_IODATA_GVMVP_SZ:
2460                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
2461                 msleep(70);
2462                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7);
2463                 msleep(10);
2464                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2465                 msleep(70);
2466                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
2467                 msleep(70);
2468                 break;
2469         }
2470
2471         em28xx_gpio_set(dev, dev->board.tuner_gpio);
2472         em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
2473
2474         /* Unlock device */
2475         em28xx_set_mode(dev, EM28XX_SUSPEND);
2476 }
2477
2478 static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
2479 {
2480         memset(ctl, 0, sizeof(*ctl));
2481
2482         ctl->fname   = XC2028_DEFAULT_FIRMWARE;
2483         ctl->max_len = 64;
2484         ctl->mts = em28xx_boards[dev->model].mts_firmware;
2485
2486         switch (dev->model) {
2487         case EM2880_BOARD_EMPIRE_DUAL_TV:
2488         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
2489         case EM2882_BOARD_TERRATEC_HYBRID_XS:
2490                 ctl->demod = XC3028_FE_ZARLINK456;
2491                 break;
2492         case EM2880_BOARD_TERRATEC_HYBRID_XS:
2493         case EM2880_BOARD_TERRATEC_HYBRID_XS_FR:
2494         case EM2881_BOARD_PINNACLE_HYBRID_PRO:
2495                 ctl->demod = XC3028_FE_ZARLINK456;
2496                 break;
2497         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
2498         case EM2882_BOARD_PINNACLE_HYBRID_PRO_330E:
2499                 ctl->demod = XC3028_FE_DEFAULT;
2500                 break;
2501         case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
2502                 ctl->demod = XC3028_FE_DEFAULT;
2503                 ctl->fname = XC3028L_DEFAULT_FIRMWARE;
2504                 break;
2505         case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
2506         case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
2507         case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
2508                 /* FIXME: Better to specify the needed IF */
2509                 ctl->demod = XC3028_FE_DEFAULT;
2510                 break;
2511         case EM2883_BOARD_KWORLD_HYBRID_330U:
2512         case EM2882_BOARD_DIKOM_DK300:
2513         case EM2882_BOARD_KWORLD_VS_DVBT:
2514                 ctl->demod = XC3028_FE_CHINA;
2515                 ctl->fname = XC2028_DEFAULT_FIRMWARE;
2516                 break;
2517         case EM2882_BOARD_EVGA_INDTUBE:
2518                 ctl->demod = XC3028_FE_CHINA;
2519                 ctl->fname = XC3028L_DEFAULT_FIRMWARE;
2520                 break;
2521         default:
2522                 ctl->demod = XC3028_FE_OREN538;
2523         }
2524 }
2525
2526 static void em28xx_tuner_setup(struct em28xx *dev)
2527 {
2528         struct tuner_setup           tun_setup;
2529         struct v4l2_frequency        f;
2530
2531         if (dev->tuner_type == TUNER_ABSENT)
2532                 return;
2533
2534         memset(&tun_setup, 0, sizeof(tun_setup));
2535
2536         tun_setup.mode_mask = T_ANALOG_TV | T_RADIO;
2537         tun_setup.tuner_callback = em28xx_tuner_callback;
2538
2539         if (dev->board.radio.type) {
2540                 tun_setup.type = dev->board.radio.type;
2541                 tun_setup.addr = dev->board.radio_addr;
2542
2543                 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
2544         }
2545
2546         if ((dev->tuner_type != TUNER_ABSENT) && (dev->tuner_type)) {
2547                 tun_setup.type   = dev->tuner_type;
2548                 tun_setup.addr   = dev->tuner_addr;
2549
2550                 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
2551         }
2552
2553         if (dev->tda9887_conf) {
2554                 struct v4l2_priv_tun_config tda9887_cfg;
2555
2556                 tda9887_cfg.tuner = TUNER_TDA9887;
2557                 tda9887_cfg.priv = &dev->tda9887_conf;
2558
2559                 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &tda9887_cfg);
2560         }
2561
2562         if (dev->tuner_type == TUNER_XC2028) {
2563                 struct v4l2_priv_tun_config  xc2028_cfg;
2564                 struct xc2028_ctrl           ctl;
2565
2566                 memset(&xc2028_cfg, 0, sizeof(xc2028_cfg));
2567                 memset(&ctl, 0, sizeof(ctl));
2568
2569                 em28xx_setup_xc3028(dev, &ctl);
2570
2571                 xc2028_cfg.tuner = TUNER_XC2028;
2572                 xc2028_cfg.priv  = &ctl;
2573
2574                 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &xc2028_cfg);
2575         }
2576
2577         /* configure tuner */
2578         f.tuner = 0;
2579         f.type = V4L2_TUNER_ANALOG_TV;
2580         f.frequency = 9076;     /* just a magic number */
2581         dev->ctl_freq = f.frequency;
2582         v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f);
2583 }
2584
2585 static int em28xx_hint_board(struct em28xx *dev)
2586 {
2587         int i;
2588
2589         /* HINT method: EEPROM
2590          *
2591          * This method works only for boards with eeprom.
2592          * Uses a hash of all eeprom bytes. The hash should be
2593          * unique for a vendor/tuner pair.
2594          * There are a high chance that tuners for different
2595          * video standards produce different hashes.
2596          */
2597         for (i = 0; i < ARRAY_SIZE(em28xx_eeprom_hash); i++) {
2598                 if (dev->hash == em28xx_eeprom_hash[i].hash) {
2599                         dev->model = em28xx_eeprom_hash[i].model;
2600                         dev->tuner_type = em28xx_eeprom_hash[i].tuner;
2601
2602                         em28xx_errdev("Your board has no unique USB ID.\n");
2603                         em28xx_errdev("A hint were successfully done, "
2604                                       "based on eeprom hash.\n");
2605                         em28xx_errdev("This method is not 100%% failproof.\n");
2606                         em28xx_errdev("If the board were missdetected, "
2607                                       "please email this log to:\n");
2608                         em28xx_errdev("\tV4L Mailing List "
2609                                       " <linux-media@vger.kernel.org>\n");
2610                         em28xx_errdev("Board detected as %s\n",
2611                                       em28xx_boards[dev->model].name);
2612
2613                         return 0;
2614                 }
2615         }
2616
2617         /* HINT method: I2C attached devices
2618          *
2619          * This method works for all boards.
2620          * Uses a hash of i2c scanned devices.
2621          * Devices with the same i2c attached chips will
2622          * be considered equal.
2623          * This method is less precise than the eeprom one.
2624          */
2625
2626         /* user did not request i2c scanning => do it now */
2627         if (!dev->i2c_hash)
2628                 em28xx_do_i2c_scan(dev);
2629
2630         for (i = 0; i < ARRAY_SIZE(em28xx_i2c_hash); i++) {
2631                 if (dev->i2c_hash == em28xx_i2c_hash[i].hash) {
2632                         dev->model = em28xx_i2c_hash[i].model;
2633                         dev->tuner_type = em28xx_i2c_hash[i].tuner;
2634                         em28xx_errdev("Your board has no unique USB ID.\n");
2635                         em28xx_errdev("A hint were successfully done, "
2636                                       "based on i2c devicelist hash.\n");
2637                         em28xx_errdev("This method is not 100%% failproof.\n");
2638                         em28xx_errdev("If the board were missdetected, "
2639                                       "please email this log to:\n");
2640                         em28xx_errdev("\tV4L Mailing List "
2641                                       " <linux-media@vger.kernel.org>\n");
2642                         em28xx_errdev("Board detected as %s\n",
2643                                       em28xx_boards[dev->model].name);
2644
2645                         return 0;
2646                 }
2647         }
2648
2649         em28xx_errdev("Your board has no unique USB ID and thus need a "
2650                       "hint to be detected.\n");
2651         em28xx_errdev("You may try to use card=<n> insmod option to "
2652                       "workaround that.\n");
2653         em28xx_errdev("Please send an email with this log to:\n");
2654         em28xx_errdev("\tV4L Mailing List <linux-media@vger.kernel.org>\n");
2655         em28xx_errdev("Board eeprom hash is 0x%08lx\n", dev->hash);
2656         em28xx_errdev("Board i2c devicelist hash is 0x%08lx\n", dev->i2c_hash);
2657
2658         em28xx_errdev("Here is a list of valid choices for the card=<n>"
2659                       " insmod option:\n");
2660         for (i = 0; i < em28xx_bcount; i++) {
2661                 em28xx_errdev("    card=%d -> %s\n",
2662                                 i, em28xx_boards[i].name);
2663         }
2664         return -1;
2665 }
2666
2667 static void em28xx_card_setup(struct em28xx *dev)
2668 {
2669         /*
2670          * If the device can be a webcam, seek for a sensor.
2671          * If sensor is not found, then it isn't a webcam.
2672          */
2673         if (dev->board.is_webcam) {
2674                 if (em28xx_hint_sensor(dev) < 0)
2675                         dev->board.is_webcam = 0;
2676                 else
2677                         dev->progressive = 1;
2678         }
2679
2680         if (!dev->board.is_webcam) {
2681                 switch (dev->model) {
2682                 case EM2820_BOARD_UNKNOWN:
2683                 case EM2800_BOARD_UNKNOWN:
2684                 /*
2685                  * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
2686                  *
2687                  * This occurs because they share identical USB vendor and
2688                  * product IDs.
2689                  *
2690                  * What we do here is look up the EEPROM hash of the K-WORLD
2691                  * and if it is found then we decide that we do not have
2692                  * a DIGIVOX and reset the device to the K-WORLD instead.
2693                  *
2694                  * This solution is only valid if they do not share eeprom
2695                  * hash identities which has not been determined as yet.
2696                  */
2697                 if (em28xx_hint_board(dev) < 0)
2698                         em28xx_errdev("Board not discovered\n");
2699                 else {
2700                         em28xx_set_model(dev);
2701                         em28xx_pre_card_setup(dev);
2702                 }
2703                 break;
2704                 default:
2705                         em28xx_set_model(dev);
2706                 }
2707         }
2708
2709         em28xx_info("Identified as %s (card=%d)\n",
2710                     dev->board.name, dev->model);
2711
2712         dev->tuner_type = em28xx_boards[dev->model].tuner_type;
2713         if (em28xx_boards[dev->model].tuner_addr)
2714                 dev->tuner_addr = em28xx_boards[dev->model].tuner_addr;
2715
2716         if (em28xx_boards[dev->model].tda9887_conf)
2717                 dev->tda9887_conf = em28xx_boards[dev->model].tda9887_conf;
2718
2719         /* request some modules */
2720         switch (dev->model) {
2721         case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
2722         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
2723         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
2724         case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
2725         case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
2726         {
2727                 struct tveeprom tv;
2728 #if defined(CONFIG_MODULES) && defined(MODULE)
2729                 request_module("tveeprom");
2730 #endif
2731                 /* Call first TVeeprom */
2732
2733                 dev->i2c_client.addr = 0xa0 >> 1;
2734                 tveeprom_hauppauge_analog(&dev->i2c_client, &tv, dev->eedata);
2735
2736                 dev->tuner_type = tv.tuner_type;
2737
2738                 if (tv.audio_processor == V4L2_IDENT_MSPX4XX) {
2739                         dev->i2s_speed = 2048000;
2740                         dev->board.has_msp34xx = 1;
2741                 }
2742                 break;
2743         }
2744         case EM2882_BOARD_KWORLD_ATSC_315U:
2745                 em28xx_write_reg(dev, 0x0d, 0x42);
2746                 msleep(10);
2747                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
2748                 msleep(10);
2749                 break;
2750         case EM2820_BOARD_KWORLD_PVRTV2800RF:
2751                 /* GPIO enables sound on KWORLD PVR TV 2800RF */
2752                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf9);
2753                 break;
2754         case EM2820_BOARD_UNKNOWN:
2755         case EM2800_BOARD_UNKNOWN:
2756                 /*
2757                  * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
2758                  *
2759                  * This occurs because they share identical USB vendor and
2760                  * product IDs.
2761                  *
2762                  * What we do here is look up the EEPROM hash of the K-WORLD
2763                  * and if it is found then we decide that we do not have
2764                  * a DIGIVOX and reset the device to the K-WORLD instead.
2765                  *
2766                  * This solution is only valid if they do not share eeprom
2767                  * hash identities which has not been determined as yet.
2768                  */
2769         case EM2880_BOARD_MSI_DIGIVOX_AD:
2770                 if (!em28xx_hint_board(dev))
2771                         em28xx_set_model(dev);
2772
2773                 /* In cases where we had to use a board hint, the call to
2774                    em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
2775                    so make the call now so the analog GPIOs are set properly
2776                    before probing the i2c bus. */
2777                 em28xx_gpio_set(dev, dev->board.tuner_gpio);
2778                 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
2779                 break;
2780
2781 /*
2782                  * The Dikom DK300 is detected as an Kworld VS-DVB-T 323UR.
2783                  *
2784                  * This occurs because they share identical USB vendor and
2785                  * product IDs.
2786                  *
2787                  * What we do here is look up the EEPROM hash of the Dikom
2788                  * and if it is found then we decide that we do not have
2789                  * a Kworld and reset the device to the Dikom instead.
2790                  *
2791                  * This solution is only valid if they do not share eeprom
2792                  * hash identities which has not been determined as yet.
2793                  */
2794         case EM2882_BOARD_KWORLD_VS_DVBT:
2795                 if (!em28xx_hint_board(dev))
2796                         em28xx_set_model(dev);
2797
2798                 /* In cases where we had to use a board hint, the call to
2799                    em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
2800                    so make the call now so the analog GPIOs are set properly
2801                    before probing the i2c bus. */
2802                 em28xx_gpio_set(dev, dev->board.tuner_gpio);
2803                 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
2804                 break;
2805         }
2806
2807         if (dev->board.valid == EM28XX_BOARD_NOT_VALIDATED) {
2808                 em28xx_errdev("\n\n");
2809                 em28xx_errdev("The support for this board weren't "
2810                               "valid yet.\n");
2811                 em28xx_errdev("Please send a report of having this working\n");
2812                 em28xx_errdev("not to V4L mailing list (and/or to other "
2813                                 "addresses)\n\n");
2814         }
2815
2816         /* Allow override tuner type by a module parameter */
2817         if (tuner >= 0)
2818                 dev->tuner_type = tuner;
2819
2820         /* request some modules */
2821         if (dev->board.has_msp34xx)
2822                 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2823                         "msp3400", 0, msp3400_addrs);
2824
2825         if (dev->board.decoder == EM28XX_SAA711X)
2826                 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2827                         "saa7115_auto", 0, saa711x_addrs);
2828
2829         if (dev->board.decoder == EM28XX_TVP5150)
2830                 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2831                         "tvp5150", 0, tvp5150_addrs);
2832
2833         if (dev->em28xx_sensor == EM28XX_MT9V011) {
2834                 struct mt9v011_platform_data pdata;
2835                 struct i2c_board_info mt9v011_info = {
2836                         .type = "mt9v011",
2837                         .addr = 0xba >> 1,
2838                         .platform_data = &pdata,
2839                 };
2840
2841                 pdata.xtal = dev->sensor_xtal;
2842                 v4l2_i2c_new_subdev_board(&dev->v4l2_dev, &dev->i2c_adap,
2843                                 &mt9v011_info, NULL);
2844         }
2845
2846
2847         if (dev->board.adecoder == EM28XX_TVAUDIO)
2848                 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2849                         "tvaudio", dev->board.tvaudio_addr, NULL);
2850
2851         if (dev->board.tuner_type != TUNER_ABSENT) {
2852                 int has_demod = (dev->tda9887_conf & TDA9887_PRESENT);
2853
2854                 if (dev->board.radio.type)
2855                         v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2856                                 "tuner", dev->board.radio_addr, NULL);
2857
2858                 if (has_demod)
2859                         v4l2_i2c_new_subdev(&dev->v4l2_dev,
2860                                 &dev->i2c_adap, "tuner",
2861                                 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
2862                 if (dev->tuner_addr == 0) {
2863                         enum v4l2_i2c_tuner_type type =
2864                                 has_demod ? ADDRS_TV_WITH_DEMOD : ADDRS_TV;
2865                         struct v4l2_subdev *sd;
2866
2867                         sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
2868                                 &dev->i2c_adap, "tuner",
2869                                 0, v4l2_i2c_tuner_addrs(type));
2870
2871                         if (sd)
2872                                 dev->tuner_addr = v4l2_i2c_subdev_addr(sd);
2873                 } else {
2874                         v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2875                                 "tuner", dev->tuner_addr, NULL);
2876                 }
2877         }
2878
2879         em28xx_tuner_setup(dev);
2880 }
2881
2882
2883 #if defined(CONFIG_MODULES) && defined(MODULE)
2884 static void request_module_async(struct work_struct *work)
2885 {
2886         struct em28xx *dev = container_of(work,
2887                              struct em28xx, request_module_wk);
2888
2889         if (dev->has_audio_class)
2890                 request_module("snd-usb-audio");
2891         else if (dev->has_alsa_audio)
2892                 request_module("em28xx-alsa");
2893
2894         if (dev->board.has_dvb)
2895                 request_module("em28xx-dvb");
2896         if (dev->board.ir_codes && !disable_ir)
2897                 request_module("em28xx-rc");
2898 }
2899
2900 static void request_modules(struct em28xx *dev)
2901 {
2902         INIT_WORK(&dev->request_module_wk, request_module_async);
2903         schedule_work(&dev->request_module_wk);
2904 }
2905
2906 static void flush_request_modules(struct em28xx *dev)
2907 {
2908         flush_work_sync(&dev->request_module_wk);
2909 }
2910 #else
2911 #define request_modules(dev)
2912 #define flush_request_modules(dev)
2913 #endif /* CONFIG_MODULES */
2914
2915 /*
2916  * em28xx_release_resources()
2917  * unregisters the v4l2,i2c and usb devices
2918  * called when the device gets disconnected or at module unload
2919 */
2920 void em28xx_release_resources(struct em28xx *dev)
2921 {
2922         /*FIXME: I2C IR should be disconnected */
2923
2924         em28xx_release_analog_resources(dev);
2925
2926         em28xx_i2c_unregister(dev);
2927
2928         v4l2_device_unregister(&dev->v4l2_dev);
2929
2930         usb_put_dev(dev->udev);
2931
2932         /* Mark device as unused */
2933         clear_bit(dev->devno, &em28xx_devused);
2934 };
2935
2936 /*
2937  * em28xx_init_dev()
2938  * allocates and inits the device structs, registers i2c bus and v4l device
2939  */
2940 static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
2941                            struct usb_interface *interface,
2942                            int minor)
2943 {
2944         int retval;
2945
2946         dev->udev = udev;
2947         mutex_init(&dev->ctrl_urb_lock);
2948         spin_lock_init(&dev->slock);
2949
2950         dev->em28xx_write_regs = em28xx_write_regs;
2951         dev->em28xx_read_reg = em28xx_read_reg;
2952         dev->em28xx_read_reg_req_len = em28xx_read_reg_req_len;
2953         dev->em28xx_write_regs_req = em28xx_write_regs_req;
2954         dev->em28xx_read_reg_req = em28xx_read_reg_req;
2955         dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800;
2956
2957         em28xx_set_model(dev);
2958
2959         /* Set the default GPO/GPIO for legacy devices */
2960         dev->reg_gpo_num = EM2880_R04_GPO;
2961         dev->reg_gpio_num = EM28XX_R08_GPIO;
2962
2963         dev->wait_after_write = 5;
2964
2965         /* Based on the Chip ID, set the device configuration */
2966         retval = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
2967         if (retval > 0) {
2968                 dev->chip_id = retval;
2969
2970                 switch (dev->chip_id) {
2971                 case CHIP_ID_EM2800:
2972                         em28xx_info("chip ID is em2800\n");
2973                         break;
2974                 case CHIP_ID_EM2710:
2975                         em28xx_info("chip ID is em2710\n");
2976                         break;
2977                 case CHIP_ID_EM2750:
2978                         em28xx_info("chip ID is em2750\n");
2979                         break;
2980                 case CHIP_ID_EM2820:
2981                         em28xx_info("chip ID is em2820 (or em2710)\n");
2982                         break;
2983                 case CHIP_ID_EM2840:
2984                         em28xx_info("chip ID is em2840\n");
2985                         break;
2986                 case CHIP_ID_EM2860:
2987                         em28xx_info("chip ID is em2860\n");
2988                         break;
2989                 case CHIP_ID_EM2870:
2990                         em28xx_info("chip ID is em2870\n");
2991                         dev->wait_after_write = 0;
2992                         break;
2993                 case CHIP_ID_EM2874:
2994                         em28xx_info("chip ID is em2874\n");
2995                         dev->reg_gpio_num = EM2874_R80_GPIO;
2996                         dev->wait_after_write = 0;
2997                         break;
2998                 case CHIP_ID_EM28174:
2999                         em28xx_info("chip ID is em28174\n");
3000                         dev->reg_gpio_num = EM2874_R80_GPIO;
3001                         dev->wait_after_write = 0;
3002                         break;
3003                 case CHIP_ID_EM2883:
3004                         em28xx_info("chip ID is em2882/em2883\n");
3005                         dev->wait_after_write = 0;
3006                         break;
3007                 case CHIP_ID_EM2884:
3008                         em28xx_info("chip ID is em2884\n");
3009                         dev->reg_gpio_num = EM2874_R80_GPIO;
3010                         dev->wait_after_write = 0;
3011                         break;
3012                 default:
3013                         em28xx_info("em28xx chip ID = %d\n", dev->chip_id);
3014                 }
3015         }
3016
3017         if (dev->is_audio_only) {
3018                 retval = em28xx_audio_setup(dev);
3019                 if (retval)
3020                         return -ENODEV;
3021                 em28xx_init_extension(dev);
3022
3023                 return 0;
3024         }
3025
3026         /* Prepopulate cached GPO register content */
3027         retval = em28xx_read_reg(dev, dev->reg_gpo_num);
3028         if (retval >= 0)
3029                 dev->reg_gpo = retval;
3030
3031         em28xx_pre_card_setup(dev);
3032
3033         if (!dev->board.is_em2800) {
3034                 /* Resets I2C speed */
3035                 retval = em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed);
3036                 if (retval < 0) {
3037                         em28xx_errdev("%s: em28xx_write_reg failed!"
3038                                       " retval [%d]\n",
3039                                       __func__, retval);
3040                         return retval;
3041                 }
3042         }
3043
3044         retval = v4l2_device_register(&interface->dev, &dev->v4l2_dev);
3045         if (retval < 0) {
3046                 em28xx_errdev("Call to v4l2_device_register() failed!\n");
3047                 return retval;
3048         }
3049
3050         /* register i2c bus */
3051         retval = em28xx_i2c_register(dev);
3052         if (retval < 0) {
3053                 em28xx_errdev("%s: em28xx_i2c_register - error [%d]!\n",
3054                         __func__, retval);
3055                 goto unregister_dev;
3056         }
3057
3058         /*
3059          * Default format, used for tvp5150 or saa711x output formats
3060          */
3061         dev->vinmode = 0x10;
3062         dev->vinctl  = EM28XX_VINCTRL_INTERLACED |
3063                        EM28XX_VINCTRL_CCIR656_ENABLE;
3064
3065         /* Do board specific init and eeprom reading */
3066         em28xx_card_setup(dev);
3067
3068         /* Configure audio */
3069         retval = em28xx_audio_setup(dev);
3070         if (retval < 0) {
3071                 em28xx_errdev("%s: Error while setting audio - error [%d]!\n",
3072                         __func__, retval);
3073                 goto fail;
3074         }
3075
3076         /* wake i2c devices */
3077         em28xx_wake_i2c(dev);
3078
3079         /* init video dma queues */
3080         INIT_LIST_HEAD(&dev->vidq.active);
3081         INIT_LIST_HEAD(&dev->vbiq.active);
3082
3083         if (dev->board.has_msp34xx) {
3084                 /* Send a reset to other chips via gpio */
3085                 retval = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7);
3086                 if (retval < 0) {
3087                         em28xx_errdev("%s: em28xx_write_reg - "
3088                                       "msp34xx(1) failed! error [%d]\n",
3089                                       __func__, retval);
3090                         goto fail;
3091                 }
3092                 msleep(3);
3093
3094                 retval = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
3095                 if (retval < 0) {
3096                         em28xx_errdev("%s: em28xx_write_reg - "
3097                                       "msp34xx(2) failed! error [%d]\n",
3098                                       __func__, retval);
3099                         goto fail;
3100                 }
3101                 msleep(3);
3102         }
3103
3104         retval = em28xx_register_analog_devices(dev);
3105         if (retval < 0) {
3106                 goto fail;
3107         }
3108
3109         /* Save some power by putting tuner to sleep */
3110         v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_power, 0);
3111
3112         return 0;
3113
3114 fail:
3115         em28xx_i2c_unregister(dev);
3116
3117 unregister_dev:
3118         v4l2_device_unregister(&dev->v4l2_dev);
3119
3120         return retval;
3121 }
3122
3123 /* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */
3124 #define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
3125
3126 /*
3127  * em28xx_usb_probe()
3128  * checks for supported devices
3129  */
3130 static int em28xx_usb_probe(struct usb_interface *interface,
3131                             const struct usb_device_id *id)
3132 {
3133         struct usb_device *udev;
3134         struct em28xx *dev = NULL;
3135         int retval;
3136         bool has_audio = false, has_video = false, has_dvb = false;
3137         int i, nr;
3138         const int ifnum = interface->altsetting[0].desc.bInterfaceNumber;
3139         char *speed;
3140
3141         udev = usb_get_dev(interface_to_usbdev(interface));
3142
3143         /* Check to see next free device and mark as used */
3144         do {
3145                 nr = find_first_zero_bit(&em28xx_devused, EM28XX_MAXBOARDS);
3146                 if (nr >= EM28XX_MAXBOARDS) {
3147                         /* No free device slots */
3148                         printk(DRIVER_NAME ": Supports only %i em28xx boards.\n",
3149                                         EM28XX_MAXBOARDS);
3150                         retval = -ENOMEM;
3151                         goto err_no_slot;
3152                 }
3153         } while (test_and_set_bit(nr, &em28xx_devused));
3154
3155         /* Don't register audio interfaces */
3156         if (interface->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
3157                 em28xx_err(DRIVER_NAME " audio device (%04x:%04x): "
3158                         "interface %i, class %i\n",
3159                         le16_to_cpu(udev->descriptor.idVendor),
3160                         le16_to_cpu(udev->descriptor.idProduct),
3161                         ifnum,
3162                         interface->altsetting[0].desc.bInterfaceClass);
3163
3164                 retval = -ENODEV;
3165                 goto err;
3166         }
3167
3168         /* allocate memory for our device state and initialize it */
3169         dev = kzalloc(sizeof(*dev), GFP_KERNEL);
3170         if (dev == NULL) {
3171                 em28xx_err(DRIVER_NAME ": out of memory!\n");
3172                 retval = -ENOMEM;
3173                 goto err;
3174         }
3175
3176         /* compute alternate max packet sizes */
3177         dev->alt_max_pkt_size = kmalloc(sizeof(dev->alt_max_pkt_size[0]) *
3178                                         interface->num_altsetting, GFP_KERNEL);
3179         if (dev->alt_max_pkt_size == NULL) {
3180                 em28xx_errdev("out of memory!\n");
3181                 kfree(dev);
3182                 retval = -ENOMEM;
3183                 goto err;
3184         }
3185
3186         /* Get endpoints */
3187         for (i = 0; i < interface->num_altsetting; i++) {
3188                 int ep;
3189
3190                 for (ep = 0; ep < interface->altsetting[i].desc.bNumEndpoints; ep++) {
3191                         const struct usb_endpoint_descriptor *e;
3192                         int sizedescr, size;
3193
3194                         e = &interface->altsetting[i].endpoint[ep].desc;
3195
3196                         sizedescr = le16_to_cpu(e->wMaxPacketSize);
3197                         size = sizedescr & 0x7ff;
3198
3199                         if (udev->speed == USB_SPEED_HIGH)
3200                                 size = size * hb_mult(sizedescr);
3201
3202                         if (usb_endpoint_xfer_isoc(e) &&
3203                             usb_endpoint_dir_in(e)) {
3204                                 switch (e->bEndpointAddress) {
3205                                 case EM28XX_EP_AUDIO:
3206                                         has_audio = true;
3207                                         break;
3208                                 case EM28XX_EP_ANALOG:
3209                                         has_video = true;
3210                                         dev->alt_max_pkt_size[i] = size;
3211                                         break;
3212                                 case EM28XX_EP_DIGITAL:
3213                                         has_dvb = true;
3214                                         if (size > dev->dvb_max_pkt_size) {
3215                                                 dev->dvb_max_pkt_size = size;
3216                                                 dev->dvb_alt = i;
3217                                         }
3218                                         break;
3219                                 }
3220                         }
3221                 }
3222         }
3223
3224         if (!(has_audio || has_video || has_dvb)) {
3225                 retval = -ENODEV;
3226                 goto err_free;
3227         }
3228
3229         switch (udev->speed) {
3230         case USB_SPEED_LOW:
3231                 speed = "1.5";
3232                 break;
3233         case USB_SPEED_UNKNOWN:
3234         case USB_SPEED_FULL:
3235                 speed = "12";
3236                 break;
3237         case USB_SPEED_HIGH:
3238                 speed = "480";
3239                 break;
3240         default:
3241                 speed = "unknown";
3242         }
3243
3244         printk(KERN_INFO DRIVER_NAME
3245                 ": New device %s %s @ %s Mbps "
3246                 "(%04x:%04x, interface %d, class %d)\n",
3247                 udev->manufacturer ? udev->manufacturer : "",
3248                 udev->product ? udev->product : "",
3249                 speed,
3250                 le16_to_cpu(udev->descriptor.idVendor),
3251                 le16_to_cpu(udev->descriptor.idProduct),
3252                 ifnum,
3253                 interface->altsetting->desc.bInterfaceNumber);
3254
3255         if (has_audio)
3256                 printk(KERN_INFO DRIVER_NAME
3257                        ": Audio Vendor Class interface %i found\n",
3258                        ifnum);
3259         if (has_video)
3260                 printk(KERN_INFO DRIVER_NAME
3261                        ": Video interface %i found\n",
3262                        ifnum);
3263         if (has_dvb)
3264                 printk(KERN_INFO DRIVER_NAME
3265                        ": DVB interface %i found\n",
3266                        ifnum);
3267
3268         /*
3269          * Make sure we have 480 Mbps of bandwidth, otherwise things like
3270          * video stream wouldn't likely work, since 12 Mbps is generally
3271          * not enough even for most Digital TV streams.
3272          */
3273         if (udev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) {
3274                 printk(DRIVER_NAME ": Device initialization failed.\n");
3275                 printk(DRIVER_NAME ": Device must be connected to a high-speed"
3276                        " USB 2.0 port.\n");
3277                 retval = -ENODEV;
3278                 goto err_free;
3279         }
3280
3281         snprintf(dev->name, sizeof(dev->name), "em28xx #%d", nr);
3282         dev->devno = nr;
3283         dev->model = id->driver_info;
3284         dev->alt   = -1;
3285         dev->is_audio_only = has_audio && !(has_video || has_dvb);
3286         dev->has_alsa_audio = has_audio;
3287         dev->audio_ifnum = ifnum;
3288
3289         /* Checks if audio is provided by some interface */
3290         for (i = 0; i < udev->config->desc.bNumInterfaces; i++) {
3291                 struct usb_interface *uif = udev->config->interface[i];
3292                 if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
3293                         dev->has_audio_class = 1;
3294                         break;
3295                 }
3296         }
3297
3298         dev->num_alt = interface->num_altsetting;
3299
3300         if ((card[nr] >= 0) && (card[nr] < em28xx_bcount))
3301                 dev->model = card[nr];
3302
3303         /* save our data pointer in this interface device */
3304         usb_set_intfdata(interface, dev);
3305
3306         /* allocate device struct */
3307         mutex_init(&dev->lock);
3308         mutex_lock(&dev->lock);
3309         retval = em28xx_init_dev(dev, udev, interface, nr);
3310         if (retval) {
3311                 goto unlock_and_free;
3312         }
3313
3314         if (has_dvb) {
3315                 /* pre-allocate DVB isoc transfer buffers */
3316                 retval = em28xx_alloc_isoc(dev, EM28XX_DIGITAL_MODE,
3317                                            EM28XX_DVB_MAX_PACKETS,
3318                                            EM28XX_DVB_NUM_BUFS,
3319                                            dev->dvb_max_pkt_size);
3320                 if (retval) {
3321                         goto unlock_and_free;
3322                 }
3323         }
3324
3325         request_modules(dev);
3326
3327         /* Should be the last thing to do, to avoid newer udev's to
3328            open the device before fully initializing it
3329          */
3330         mutex_unlock(&dev->lock);
3331
3332         /*
3333          * These extensions can be modules. If the modules are already
3334          * loaded then we can initialise the device now, otherwise we
3335          * will initialise it when the modules load instead.
3336          */
3337         em28xx_init_extension(dev);
3338
3339         return 0;
3340
3341 unlock_and_free:
3342         mutex_unlock(&dev->lock);
3343
3344 err_free:
3345         kfree(dev->alt_max_pkt_size);
3346         kfree(dev);
3347
3348 err:
3349         clear_bit(nr, &em28xx_devused);
3350
3351 err_no_slot:
3352         usb_put_dev(udev);
3353         return retval;
3354 }
3355
3356 /*
3357  * em28xx_usb_disconnect()
3358  * called when the device gets disconnected
3359  * video device will be unregistered on v4l2_close in case it is still open
3360  */
3361 static void em28xx_usb_disconnect(struct usb_interface *interface)
3362 {
3363         struct em28xx *dev;
3364
3365         dev = usb_get_intfdata(interface);
3366         usb_set_intfdata(interface, NULL);
3367
3368         if (!dev)
3369                 return;
3370
3371         if (dev->is_audio_only) {
3372                 mutex_lock(&dev->lock);
3373                 em28xx_close_extension(dev);
3374                 mutex_unlock(&dev->lock);
3375                 return;
3376         }
3377
3378         em28xx_info("disconnecting %s\n", dev->vdev->name);
3379
3380         flush_request_modules(dev);
3381
3382         /* wait until all current v4l2 io is finished then deallocate
3383            resources */
3384         mutex_lock(&dev->lock);
3385
3386         v4l2_device_disconnect(&dev->v4l2_dev);
3387
3388         if (dev->users) {
3389                 em28xx_warn
3390                     ("device %s is open! Deregistration and memory "
3391                      "deallocation are deferred on close.\n",
3392                      video_device_node_name(dev->vdev));
3393
3394                 dev->state |= DEV_MISCONFIGURED;
3395                 em28xx_uninit_isoc(dev, dev->mode);
3396                 dev->state |= DEV_DISCONNECTED;
3397         } else {
3398                 dev->state |= DEV_DISCONNECTED;
3399                 em28xx_release_resources(dev);
3400         }
3401
3402         /* free DVB isoc buffers */
3403         em28xx_uninit_isoc(dev, EM28XX_DIGITAL_MODE);
3404
3405         mutex_unlock(&dev->lock);
3406
3407         em28xx_close_extension(dev);
3408
3409         if (!dev->users) {
3410                 kfree(dev->alt_max_pkt_size);
3411                 kfree(dev);
3412         }
3413 }
3414
3415 static struct usb_driver em28xx_usb_driver = {
3416         .name = "em28xx",
3417         .probe = em28xx_usb_probe,
3418         .disconnect = em28xx_usb_disconnect,
3419         .id_table = em28xx_id_table,
3420 };
3421
3422 module_usb_driver(em28xx_usb_driver);