drivers/media/video/bt8xx/bttv-cards.c

   1 /*
   2
   3     bttv-cards.c
   4
   5     this file has configuration informations - card-specific stuff
   6     like the big tvcards array for the most part
   7
   8     Copyright (C) 1996,97,98 Ralph  Metzler (rjkm@thp.uni-koeln.de)
   9                            & Marcus Metzler (mocm@thp.uni-koeln.de)
  10     (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
  11
  12     This program is free software; you can redistribute it and/or modify
  13     it under the terms of the GNU General Public License as published by
  14     the Free Software Foundation; either version 2 of the License, or
  15     (at your option) any later version.
  16
  17     This program is distributed in the hope that it will be useful,
  18     but WITHOUT ANY WARRANTY; without even the implied warranty of
  19     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  20     GNU General Public License for more details.
  21
  22     You should have received a copy of the GNU General Public License
  23     along with this program; if not, write to the Free Software
  24     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  25
  26 */
  27
  28 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  29
  30 #include <linux/delay.h>
  31 #include <linux/module.h>
  32 #include <linux/kmod.h>
  33 #include <linux/init.h>
  34 #include <linux/pci.h>
  35 #include <linux/vmalloc.h>
  36 #include <linux/firmware.h>
  37 #include <net/checksum.h>
  38
  39 #include <asm/unaligned.h>
  40 #include <asm/io.h>
  41
  42 #include "bttvp.h"
  43 #include <media/v4l2-common.h>
  44 #include <media/tvaudio.h>
  45 #include "bttv-audio-hook.h"
  46
  47 /* fwd decl */
  48 static void boot_msp34xx(struct bttv *btv, int pin);
  49 static void hauppauge_eeprom(struct bttv *btv);
  50 static void avermedia_eeprom(struct bttv *btv);
  51 static void osprey_eeprom(struct bttv *btv, const u8 ee[256]);
  52 static void modtec_eeprom(struct bttv *btv);
  53 static void init_PXC200(struct bttv *btv);
  54 static void init_RTV24(struct bttv *btv);
  55
  56 static void rv605_muxsel(struct bttv *btv, unsigned int input);
  57 static void eagle_muxsel(struct bttv *btv, unsigned int input);
  58 static void xguard_muxsel(struct bttv *btv, unsigned int input);
  59 static void ivc120_muxsel(struct bttv *btv, unsigned int input);
  60 static void gvc1100_muxsel(struct bttv *btv, unsigned int input);
  61
  62 static void PXC200_muxsel(struct bttv *btv, unsigned int input);
  63
  64 static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input);
  65 static void picolo_tetra_init(struct bttv *btv);
  66
  67 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input);
  68 static void tibetCS16_init(struct bttv *btv);
  69
  70 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input);
  71 static void kodicom4400r_init(struct bttv *btv);
  72
  73 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input);
  74 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input);
  75
  76 static void geovision_muxsel(struct bttv *btv, unsigned int input);
  77
  78 static void phytec_muxsel(struct bttv *btv, unsigned int input);
  79
  80 static void gv800s_muxsel(struct bttv *btv, unsigned int input);
  81 static void gv800s_init(struct bttv *btv);
  82
  83 static void td3116_muxsel(struct bttv *btv, unsigned int input);
  84
  85 static int terratec_active_radio_upgrade(struct bttv *btv);
  86 static int tea5757_read(struct bttv *btv);
  87 static int tea5757_write(struct bttv *btv, int value);
  88 static void identify_by_eeprom(struct bttv *btv,
  89                                unsigned char eeprom_data[256]);
  90 static int __devinit pvr_boot(struct bttv *btv);
  91
  92 /* config variables */
  93 static unsigned int triton1;
  94 static unsigned int vsfx;
  95 static unsigned int latency = UNSET;
  96 int no_overlay=-1;
  97
  98 static unsigned int card[BTTV_MAX]   = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
  99 static unsigned int pll[BTTV_MAX]    = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
 100 static unsigned int tuner[BTTV_MAX]  = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
 101 static unsigned int svhs[BTTV_MAX]   = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
 102 static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
 103 static unsigned int audiodev[BTTV_MAX];
 104 static unsigned int saa6588[BTTV_MAX];
 105 static struct bttv  *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL };
 106 static unsigned int autoload = UNSET;
 107 static unsigned int gpiomask = UNSET;
 108 static unsigned int audioall = UNSET;
 109 static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET };
 110
 111 /* insmod options */
 112 module_param(triton1,    int, 0444);
 113 module_param(vsfx,       int, 0444);
 114 module_param(no_overlay, int, 0444);
 115 module_param(latency,    int, 0444);
 116 module_param(gpiomask,   int, 0444);
 117 module_param(audioall,   int, 0444);
 118 module_param(autoload,   int, 0444);
 119
 120 module_param_array(card,     int, NULL, 0444);
 121 module_param_array(pll,      int, NULL, 0444);
 122 module_param_array(tuner,    int, NULL, 0444);
 123 module_param_array(svhs,     int, NULL, 0444);
 124 module_param_array(remote,   int, NULL, 0444);
 125 module_param_array(audiodev, int, NULL, 0444);
 126 module_param_array(audiomux, int, NULL, 0444);
 127
 128 MODULE_PARM_DESC(triton1,"set ETBF pci config bit "
 129                  "[enable bug compatibility for triton1 + others]");
 130 MODULE_PARM_DESC(vsfx,"set VSFX pci config bit "
 131                  "[yet another chipset flaw workaround]");
 132 MODULE_PARM_DESC(latency,"pci latency timer");
 133 MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
 134 MODULE_PARM_DESC(pll,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)");
 135 MODULE_PARM_DESC(tuner,"specify installed tuner type");
 136 MODULE_PARM_DESC(autoload, "obsolete option, please do not use anymore");
 137 MODULE_PARM_DESC(audiodev, "specify audio device:\n"
 138                 "\t\t-1 = no audio\n"
 139                 "\t\t 0 = autodetect (default)\n"
 140                 "\t\t 1 = msp3400\n"
 141                 "\t\t 2 = tda7432\n"
 142                 "\t\t 3 = tvaudio");
 143 MODULE_PARM_DESC(saa6588, "if 1, then load the saa6588 RDS module, default (0) is to use the card definition.");
 144 MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)"
 145                 " [some VIA/SIS chipsets are known to have problem with overlay]");
 146
 147 /* ----------------------------------------------------------------------- */
 148 /* list of card IDs for bt878+ cards                                       */
 149
 150 static struct CARD {
 151         unsigned id;
 152         int cardnr;
 153         char *name;
 154 } cards[] __devinitdata = {
 155         { 0x13eb0070, BTTV_BOARD_HAUPPAUGE878,  "Hauppauge WinTV" },
 156         { 0x39000070, BTTV_BOARD_HAUPPAUGE878,  "Hauppauge WinTV-D" },
 157         { 0x45000070, BTTV_BOARD_HAUPPAUGEPVR,  "Hauppauge WinTV/PVR" },
 158         { 0xff000070, BTTV_BOARD_OSPREY1x0,     "Osprey-100" },
 159         { 0xff010070, BTTV_BOARD_OSPREY2x0_SVID,"Osprey-200" },
 160         { 0xff020070, BTTV_BOARD_OSPREY500,     "Osprey-500" },
 161         { 0xff030070, BTTV_BOARD_OSPREY2000,    "Osprey-2000" },
 162         { 0xff040070, BTTV_BOARD_OSPREY540,     "Osprey-540" },
 163         { 0xff070070, BTTV_BOARD_OSPREY440,     "Osprey-440" },
 164
 165         { 0x00011002, BTTV_BOARD_ATI_TVWONDER,  "ATI TV Wonder" },
 166         { 0x00031002, BTTV_BOARD_ATI_TVWONDERVE,"ATI TV Wonder/VE" },
 167
 168         { 0x6606107d, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
 169         { 0x6607107d, BTTV_BOARD_WINFASTVC100,  "Leadtek WinFast VC 100" },
 170         { 0x6609107d, BTTV_BOARD_WINFAST2000,   "Leadtek TV 2000 XP" },
 171         { 0x263610b4, BTTV_BOARD_STB2,          "STB TV PCI FM, Gateway P/N 6000704" },
 172         { 0x264510b4, BTTV_BOARD_STB2,          "STB TV PCI FM, Gateway P/N 6000704" },
 173         { 0x402010fc, BTTV_BOARD_GVBCTV3PCI,    "I-O Data Co. GV-BCTV3/PCI" },
 174         { 0x405010fc, BTTV_BOARD_GVBCTV4PCI,    "I-O Data Co. GV-BCTV4/PCI" },
 175         { 0x407010fc, BTTV_BOARD_GVBCTV5PCI,    "I-O Data Co. GV-BCTV5/PCI" },
 176         { 0xd01810fc, BTTV_BOARD_GVBCTV5PCI,    "I-O Data Co. GV-BCTV5/PCI" },
 177
 178         { 0x001211bd, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV" },
 179         /* some cards ship with byteswapped IDs ... */
 180         { 0x1200bd11, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV [bswap]" },
 181         { 0xff00bd11, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV [bswap]" },
 182         /* this seems to happen as well ... */
 183         { 0xff1211bd, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV" },
 184
 185         { 0x3000121a, BTTV_BOARD_VOODOOTV_200,  "3Dfx VoodooTV 200" },
 186         { 0x263710b4, BTTV_BOARD_VOODOOTV_FM,   "3Dfx VoodooTV FM" },
 187         { 0x3060121a, BTTV_BOARD_STB2,    "3Dfx VoodooTV 100/ STB OEM" },
 188
 189         { 0x3000144f, BTTV_BOARD_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" },
 190         { 0xa005144f, BTTV_BOARD_MAGICTVIEW063, "CPH06X TView99-Card" },
 191         { 0x3002144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" },
 192         { 0x3005144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
 193         { 0x5000144f, BTTV_BOARD_MAGICTVIEW061, "Askey CPH050" },
 194         { 0x300014ff, BTTV_BOARD_MAGICTVIEW061, "TView 99 (CPH061)" },
 195         { 0x300214ff, BTTV_BOARD_PHOEBE_TVMAS,  "Phoebe TV Master (CPH060)" },
 196
 197         { 0x00011461, BTTV_BOARD_AVPHONE98,     "AVerMedia TVPhone98" },
 198         { 0x00021461, BTTV_BOARD_AVERMEDIA98,   "AVermedia TVCapture 98" },
 199         { 0x00031461, BTTV_BOARD_AVPHONE98,     "AVerMedia TVPhone98" },
 200         { 0x00041461, BTTV_BOARD_AVERMEDIA98,   "AVerMedia TVCapture 98" },
 201         { 0x03001461, BTTV_BOARD_AVERMEDIA98,   "VDOMATE TV TUNER CARD" },
 202
 203         { 0x1117153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Philips PAL B/G)" },
 204         { 0x1118153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Temic PAL B/G)" },
 205         { 0x1119153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Philips PAL I)" },
 206         { 0x111a153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Temic PAL I)" },
 207
 208         { 0x1123153b, BTTV_BOARD_TERRATVRADIO,  "Terratec TV Radio+" },
 209         { 0x1127153b, BTTV_BOARD_TERRATV,       "Terratec TV+ (V1.05)"    },
 210         /* clashes with FlyVideo
 211          *{ 0x18521852, BTTV_BOARD_TERRATV,     "Terratec TV+ (V1.10)"    }, */
 212         { 0x1134153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (LR102)" },
 213         { 0x1135153b, BTTV_BOARD_TERRATVALUER,  "Terratec TValue Radio" }, /* LR102 */
 214         { 0x5018153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue" },       /* ?? */
 215         { 0xff3b153b, BTTV_BOARD_TERRATVALUER,  "Terratec TValue Radio" }, /* ?? */
 216
 217         { 0x400015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
 218         { 0x400a15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
 219         { 0x400d15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
 220         { 0x401015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
 221         { 0x401615b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
 222
 223         { 0x1430aa00, BTTV_BOARD_PV143,         "Provideo PV143A" },
 224         { 0x1431aa00, BTTV_BOARD_PV143,         "Provideo PV143B" },
 225         { 0x1432aa00, BTTV_BOARD_PV143,         "Provideo PV143C" },
 226         { 0x1433aa00, BTTV_BOARD_PV143,         "Provideo PV143D" },
 227         { 0x1433aa03, BTTV_BOARD_PV143,         "Security Eyes" },
 228
 229         { 0x1460aa00, BTTV_BOARD_PV150,         "Provideo PV150A-1" },
 230         { 0x1461aa01, BTTV_BOARD_PV150,         "Provideo PV150A-2" },
 231         { 0x1462aa02, BTTV_BOARD_PV150,         "Provideo PV150A-3" },
 232         { 0x1463aa03, BTTV_BOARD_PV150,         "Provideo PV150A-4" },
 233
 234         { 0x1464aa04, BTTV_BOARD_PV150,         "Provideo PV150B-1" },
 235         { 0x1465aa05, BTTV_BOARD_PV150,         "Provideo PV150B-2" },
 236         { 0x1466aa06, BTTV_BOARD_PV150,         "Provideo PV150B-3" },
 237         { 0x1467aa07, BTTV_BOARD_PV150,         "Provideo PV150B-4" },
 238
 239         { 0xa132ff00, BTTV_BOARD_IVC100,        "IVC-100"  },
 240         { 0xa1550000, BTTV_BOARD_IVC200,        "IVC-200"  },
 241         { 0xa1550001, BTTV_BOARD_IVC200,        "IVC-200"  },
 242         { 0xa1550002, BTTV_BOARD_IVC200,        "IVC-200"  },
 243         { 0xa1550003, BTTV_BOARD_IVC200,        "IVC-200"  },
 244         { 0xa1550100, BTTV_BOARD_IVC200,        "IVC-200G" },
 245         { 0xa1550101, BTTV_BOARD_IVC200,        "IVC-200G" },
 246         { 0xa1550102, BTTV_BOARD_IVC200,        "IVC-200G" },
 247         { 0xa1550103, BTTV_BOARD_IVC200,        "IVC-200G" },
 248         { 0xa1550800, BTTV_BOARD_IVC200,        "IVC-200"  },
 249         { 0xa1550801, BTTV_BOARD_IVC200,        "IVC-200"  },
 250         { 0xa1550802, BTTV_BOARD_IVC200,        "IVC-200"  },
 251         { 0xa1550803, BTTV_BOARD_IVC200,        "IVC-200"  },
 252         { 0xa182ff00, BTTV_BOARD_IVC120,        "IVC-120G" },
 253         { 0xa182ff01, BTTV_BOARD_IVC120,        "IVC-120G" },
 254         { 0xa182ff02, BTTV_BOARD_IVC120,        "IVC-120G" },
 255         { 0xa182ff03, BTTV_BOARD_IVC120,        "IVC-120G" },
 256         { 0xa182ff04, BTTV_BOARD_IVC120,        "IVC-120G" },
 257         { 0xa182ff05, BTTV_BOARD_IVC120,        "IVC-120G" },
 258         { 0xa182ff06, BTTV_BOARD_IVC120,        "IVC-120G" },
 259         { 0xa182ff07, BTTV_BOARD_IVC120,        "IVC-120G" },
 260         { 0xa182ff08, BTTV_BOARD_IVC120,        "IVC-120G" },
 261         { 0xa182ff09, BTTV_BOARD_IVC120,        "IVC-120G" },
 262         { 0xa182ff0a, BTTV_BOARD_IVC120,        "IVC-120G" },
 263         { 0xa182ff0b, BTTV_BOARD_IVC120,        "IVC-120G" },
 264         { 0xa182ff0c, BTTV_BOARD_IVC120,        "IVC-120G" },
 265         { 0xa182ff0d, BTTV_BOARD_IVC120,        "IVC-120G" },
 266         { 0xa182ff0e, BTTV_BOARD_IVC120,        "IVC-120G" },
 267         { 0xa182ff0f, BTTV_BOARD_IVC120,        "IVC-120G" },
 268         { 0xf0500000, BTTV_BOARD_IVCE8784,      "IVCE-8784" },
 269         { 0xf0500001, BTTV_BOARD_IVCE8784,      "IVCE-8784" },
 270         { 0xf0500002, BTTV_BOARD_IVCE8784,      "IVCE-8784" },
 271         { 0xf0500003, BTTV_BOARD_IVCE8784,      "IVCE-8784" },
 272
 273         { 0x41424344, BTTV_BOARD_GRANDTEC,      "GrandTec Multi Capture" },
 274         { 0x01020304, BTTV_BOARD_XGUARD,        "Grandtec Grand X-Guard" },
 275
 276         { 0x18501851, BTTV_BOARD_CHRONOS_VS2,   "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
 277         { 0xa0501851, BTTV_BOARD_CHRONOS_VS2,   "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
 278         { 0x18511851, BTTV_BOARD_FLYVIDEO98EZ,  "FlyVideo 98EZ (LR51)/ CyberMail AV" },
 279         { 0x18521852, BTTV_BOARD_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
 280         { 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" },
 281         { 0x18501f7f, BTTV_BOARD_FLYVIDEO_98,   "Lifeview Flyvideo 98" },
 282
 283         { 0x010115cb, BTTV_BOARD_GMV1,          "AG GMV1" },
 284         { 0x010114c7, BTTV_BOARD_MODTEC_205,    "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
 285
 286         { 0x10b42636, BTTV_BOARD_HAUPPAUGE878,  "STB ???" },
 287         { 0x217d6606, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
 288         { 0xfff6f6ff, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
 289         { 0x03116000, BTTV_BOARD_SENSORAY311_611, "Sensoray 311" },
 290         { 0x06116000, BTTV_BOARD_SENSORAY311_611, "Sensoray 611" },
 291         { 0x00790e11, BTTV_BOARD_WINDVR,        "Canopus WinDVR PCI" },
 292         { 0xa0fca1a0, BTTV_BOARD_ZOLTRIX,       "Face to Face Tvmax" },
 293         { 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100, "SIMUS GVC1100" },
 294         { 0x146caa0c, BTTV_BOARD_PV951,         "ituner spectra8" },
 295         { 0x200a1295, BTTV_BOARD_PXC200,        "ImageNation PXC200A" },
 296
 297         { 0x40111554, BTTV_BOARD_PV_BT878P_9B,  "Prolink Pixelview PV-BT" },
 298         { 0x17de0a01, BTTV_BOARD_KWORLD,        "Mecer TV/FM/Video Tuner" },
 299
 300         { 0x01051805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" },
 301         { 0x01061805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" },
 302         { 0x01071805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" },
 303         { 0x01081805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" },
 304
 305         { 0x15409511, BTTV_BOARD_ACORP_Y878F, "Acorp Y878F" },
 306
 307         { 0x53534149, BTTV_BOARD_SSAI_SECURITY, "SSAI Security Video Interface" },
 308         { 0x5353414a, BTTV_BOARD_SSAI_ULTRASOUND, "SSAI Ultrasound Video Interface" },
 309
 310         /* likely broken, vendor id doesn't match the other magic views ...
 311          * { 0xa0fca04f, BTTV_BOARD_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */
 312
 313         /* Duplicate PCI ID, reconfigure for this board during the eeprom read.
 314         * { 0x13eb0070, BTTV_BOARD_HAUPPAUGE_IMPACTVCB,  "Hauppauge ImpactVCB" }, */
 315
 316         { 0x109e036e, BTTV_BOARD_CONCEPTRONIC_CTVFMI2,  "Conceptronic CTVFMi v2"},
 317
 318         /* DVB cards (using pci function .1 for mpeg data xfer) */
 319         { 0x001c11bd, BTTV_BOARD_PINNACLESAT,   "Pinnacle PCTV Sat" },
 320         { 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
 321         { 0x20007063, BTTV_BOARD_PC_HDTV,       "pcHDTV HD-2000 TV"},
 322         { 0x002611bd, BTTV_BOARD_TWINHAN_DST,   "Pinnacle PCTV SAT CI" },
 323         { 0x00011822, BTTV_BOARD_TWINHAN_DST,   "Twinhan VisionPlus DVB" },
 324         { 0xfc00270f, BTTV_BOARD_TWINHAN_DST,   "ChainTech digitop DST-1000 DVB-S" },
 325         { 0x07711461, BTTV_BOARD_AVDVBT_771,    "AVermedia AverTV DVB-T 771" },
 326         { 0x07611461, BTTV_BOARD_AVDVBT_761,    "AverMedia AverTV DVB-T 761" },
 327         { 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE,    "DViCO FusionHDTV DVB-T Lite" },
 328         { 0xdb1118ac, BTTV_BOARD_DVICO_DVBT_LITE,    "Ultraview DVB-T Lite" },
 329         { 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE,    "DViCO FusionHDTV 5 Lite" },
 330         { 0x00261822, BTTV_BOARD_TWINHAN_DST,   "DNTV Live! Mini "},
 331         { 0xd200dbc0, BTTV_BOARD_DVICO_FUSIONHDTV_2,    "DViCO FusionHDTV 2" },
 332         { 0x763c008a, BTTV_BOARD_GEOVISION_GV600,       "GeoVision GV-600" },
 333         { 0x18011000, BTTV_BOARD_ENLTV_FM_2,    "Encore ENL TV-FM-2" },
 334         { 0x763d800a, BTTV_BOARD_GEOVISION_GV800S, "GeoVision GV-800(S) (master)" },
 335         { 0x763d800b, BTTV_BOARD_GEOVISION_GV800S_SL,   "GeoVision GV-800(S) (slave)" },
 336         { 0x763d800c, BTTV_BOARD_GEOVISION_GV800S_SL,   "GeoVision GV-800(S) (slave)" },
 337         { 0x763d800d, BTTV_BOARD_GEOVISION_GV800S_SL,   "GeoVision GV-800(S) (slave)" },
 338
 339         { 0x15401830, BTTV_BOARD_PV183,         "Provideo PV183-1" },
 340         { 0x15401831, BTTV_BOARD_PV183,         "Provideo PV183-2" },
 341         { 0x15401832, BTTV_BOARD_PV183,         "Provideo PV183-3" },
 342         { 0x15401833, BTTV_BOARD_PV183,         "Provideo PV183-4" },
 343         { 0x15401834, BTTV_BOARD_PV183,         "Provideo PV183-5" },
 344         { 0x15401835, BTTV_BOARD_PV183,         "Provideo PV183-6" },
 345         { 0x15401836, BTTV_BOARD_PV183,         "Provideo PV183-7" },
 346         { 0x15401837, BTTV_BOARD_PV183,         "Provideo PV183-8" },
 347         { 0x3116f200, BTTV_BOARD_TVT_TD3116,    "Tongwei Video Technology TD-3116" },
 348
 349         { 0, -1, NULL }
 350 };
 351
 352 /* ----------------------------------------------------------------------- */
 353 /* array with description for bt848 / bt878 tv/grabber cards               */
 354
 355 struct tvcard bttv_tvcards[] = {
 356         /* ---- card 0x00 ---------------------------------- */
 357         [BTTV_BOARD_UNKNOWN] = {
 358                 .name           = " *** UNKNOWN/GENERIC *** ",
 359                 .video_inputs   = 4,
 360                 .svhs           = 2,
 361                 .muxsel         = MUXSEL(2, 3, 1, 0),
 362                 .tuner_type     = UNSET,
 363                 .tuner_addr     = ADDR_UNSET,
 364         },
 365         [BTTV_BOARD_MIRO] = {
 366                 .name           = "MIRO PCTV",
 367                 .video_inputs   = 4,
 368                 /* .audio_inputs= 1, */
 369                 .svhs           = 2,
 370                 .gpiomask       = 15,
 371                 .muxsel         = MUXSEL(2, 3, 1, 1),
 372                 .gpiomux        = { 2, 0, 0, 0 },
 373                 .gpiomute       = 10,
 374                 .tuner_type     = UNSET,
 375                 .tuner_addr     = ADDR_UNSET,
 376         },
 377         [BTTV_BOARD_HAUPPAUGE] = {
 378                 .name           = "Hauppauge (bt848)",
 379                 .video_inputs   = 4,
 380                 /* .audio_inputs= 1, */
 381                 .svhs           = 2,
 382                 .gpiomask       = 7,
 383                 .muxsel         = MUXSEL(2, 3, 1, 1),
 384                 .gpiomux        = { 0, 1, 2, 3 },
 385                 .gpiomute       = 4,
 386                 .tuner_type     = UNSET,
 387                 .tuner_addr     = ADDR_UNSET,
 388         },
 389         [BTTV_BOARD_STB] = {
 390                 .name           = "STB, Gateway P/N 6000699 (bt848)",
 391                 .video_inputs   = 3,
 392                 /* .audio_inputs= 1, */
 393                 .svhs           = 2,
 394                 .gpiomask       = 7,
 395                 .muxsel         = MUXSEL(2, 3, 1, 1),
 396                 .gpiomux        = { 4, 0, 2, 3 },
 397                 .gpiomute       = 1,
 398                 .no_msp34xx     = 1,
 399                 .tuner_type     = TUNER_PHILIPS_NTSC,
 400                 .tuner_addr     = ADDR_UNSET,
 401                 .pll            = PLL_28,
 402                 .has_radio      = 1,
 403         },
 404
 405         /* ---- card 0x04 ---------------------------------- */
 406         [BTTV_BOARD_INTEL] = {
 407                 .name           = "Intel Create and Share PCI/ Smart Video Recorder III",
 408                 .video_inputs   = 4,
 409                 /* .audio_inputs= 0, */
 410                 .svhs           = 2,
 411                 .gpiomask       = 0,
 412                 .muxsel         = MUXSEL(2, 3, 1, 1),
 413                 .gpiomux        = { 0 },
 414                 .tuner_type     = TUNER_ABSENT,
 415                 .tuner_addr     = ADDR_UNSET,
 416         },
 417         [BTTV_BOARD_DIAMOND] = {
 418                 .name           = "Diamond DTV2000",
 419                 .video_inputs   = 4,
 420                 /* .audio_inputs= 1, */
 421                 .svhs           = 2,
 422                 .gpiomask       = 3,
 423                 .muxsel         = MUXSEL(2, 3, 1, 0),
 424                 .gpiomux        = { 0, 1, 0, 1 },
 425                 .gpiomute       = 3,
 426                 .tuner_type     = UNSET,
 427                 .tuner_addr     = ADDR_UNSET,
 428         },
 429         [BTTV_BOARD_AVERMEDIA] = {
 430                 .name           = "AVerMedia TVPhone",
 431                 .video_inputs   = 3,
 432                 /* .audio_inputs= 1, */
 433                 .svhs           = 3,
 434                 .muxsel         = MUXSEL(2, 3, 1, 1),
 435                 .gpiomask       = 0x0f,
 436                 .gpiomux        = { 0x0c, 0x04, 0x08, 0x04 },
 437                 /*                0x04 for some cards ?? */
 438                 .tuner_type     = UNSET,
 439                 .tuner_addr     = ADDR_UNSET,
 440                 .audio_mode_gpio= avermedia_tvphone_audio,
 441                 .has_remote     = 1,
 442         },
 443         [BTTV_BOARD_MATRIX_VISION] = {
 444                 .name           = "MATRIX-Vision MV-Delta",
 445                 .video_inputs   = 5,
 446                 /* .audio_inputs= 1, */
 447                 .svhs           = 3,
 448                 .gpiomask       = 0,
 449                 .muxsel         = MUXSEL(2, 3, 1, 0, 0),
 450                 .gpiomux        = { 0 },
 451                 .tuner_type     = TUNER_ABSENT,
 452                 .tuner_addr     = ADDR_UNSET,
 453         },
 454
 455         /* ---- card 0x08 ---------------------------------- */
 456         [BTTV_BOARD_FLYVIDEO] = {
 457                 .name           = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26",
 458                 .video_inputs   = 4,
 459                 /* .audio_inputs= 1, */
 460                 .svhs           = 2,
 461                 .gpiomask       = 0xc00,
 462                 .muxsel         = MUXSEL(2, 3, 1, 1),
 463                 .gpiomux        = { 0, 0xc00, 0x800, 0x400 },
 464                 .gpiomute       = 0xc00,
 465                 .pll            = PLL_28,
 466                 .tuner_type     = UNSET,
 467                 .tuner_addr     = ADDR_UNSET,
 468         },
 469         [BTTV_BOARD_TURBOTV] = {
 470                 .name           = "IMS/IXmicro TurboTV",
 471                 .video_inputs   = 3,
 472                 /* .audio_inputs= 1, */
 473                 .svhs           = 2,
 474                 .gpiomask       = 3,
 475                 .muxsel         = MUXSEL(2, 3, 1, 1),
 476                 .gpiomux        = { 1, 1, 2, 3 },
 477                 .pll            = PLL_28,
 478                 .tuner_type     = TUNER_TEMIC_PAL,
 479                 .tuner_addr     = ADDR_UNSET,
 480         },
 481         [BTTV_BOARD_HAUPPAUGE878] = {
 482                 .name           = "Hauppauge (bt878)",
 483                 .video_inputs   = 4,
 484                 /* .audio_inputs= 1, */
 485                 .svhs           = 2,
 486                 .gpiomask       = 0x0f, /* old: 7 */
 487                 .muxsel         = MUXSEL(2, 0, 1, 1),
 488                 .gpiomux        = { 0, 1, 2, 3 },
 489                 .gpiomute       = 4,
 490                 .pll            = PLL_28,
 491                 .tuner_type     = UNSET,
 492                 .tuner_addr     = ADDR_UNSET,
 493         },
 494         [BTTV_BOARD_MIROPRO] = {
 495                 .name           = "MIRO PCTV pro",
 496                 .video_inputs   = 3,
 497                 /* .audio_inputs= 1, */
 498                 .svhs           = 2,
 499                 .gpiomask       = 0x3014f,
 500                 .muxsel         = MUXSEL(2, 3, 1, 1),
 501                 .gpiomux        = { 0x20001,0x10001, 0, 0 },
 502                 .gpiomute       = 10,
 503                 .tuner_type     = UNSET,
 504                 .tuner_addr     = ADDR_UNSET,
 505         },
 506
 507         /* ---- card 0x0c ---------------------------------- */
 508         [BTTV_BOARD_ADSTECH_TV] = {
 509                 .name           = "ADS Technologies Channel Surfer TV (bt848)",
 510                 .video_inputs   = 3,
 511                 /* .audio_inputs= 1, */
 512                 .svhs           = 2,
 513                 .gpiomask       = 15,
 514                 .muxsel         = MUXSEL(2, 3, 1, 1),
 515                 .gpiomux        = { 13, 14, 11, 7 },
 516                 .tuner_type     = UNSET,
 517                 .tuner_addr     = ADDR_UNSET,
 518         },
 519         [BTTV_BOARD_AVERMEDIA98] = {
 520                 .name           = "AVerMedia TVCapture 98",
 521                 .video_inputs   = 3,
 522                 /* .audio_inputs= 4, */
 523                 .svhs           = 2,
 524                 .gpiomask       = 15,
 525                 .muxsel         = MUXSEL(2, 3, 1, 1),
 526                 .gpiomux        = { 13, 14, 11, 7 },
 527                 .msp34xx_alt    = 1,
 528                 .pll            = PLL_28,
 529                 .tuner_type     = TUNER_PHILIPS_PAL,
 530                 .tuner_addr     = ADDR_UNSET,
 531                 .audio_mode_gpio= avermedia_tv_stereo_audio,
 532                 .no_gpioirq     = 1,
 533         },
 534         [BTTV_BOARD_VHX] = {
 535                 .name           = "Aimslab Video Highway Xtreme (VHX)",
 536                 .video_inputs   = 3,
 537                 /* .audio_inputs= 1, */
 538                 .svhs           = 2,
 539                 .gpiomask       = 7,
 540                 .muxsel         = MUXSEL(2, 3, 1, 1),
 541                 .gpiomux        = { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */
 542                 .gpiomute       = 4,
 543                 .pll            = PLL_28,
 544                 .tuner_type     = UNSET,
 545                 .tuner_addr     = ADDR_UNSET,
 546         },
 547         [BTTV_BOARD_ZOLTRIX] = {
 548                 .name           = "Zoltrix TV-Max",
 549                 .video_inputs   = 3,
 550                 /* .audio_inputs= 1, */
 551                 .svhs           = 2,
 552                 .gpiomask       = 15,
 553                 .muxsel         = MUXSEL(2, 3, 1, 1),
 554                 .gpiomux        = { 0, 0, 1, 0 },
 555                 .gpiomute       = 10,
 556                 .tuner_type     = UNSET,
 557                 .tuner_addr     = ADDR_UNSET,
 558         },
 559
 560         /* ---- card 0x10 ---------------------------------- */
 561         [BTTV_BOARD_PIXVIEWPLAYTV] = {
 562                 .name           = "Prolink Pixelview PlayTV (bt878)",
 563                 .video_inputs   = 3,
 564                 /* .audio_inputs= 1, */
 565                 .svhs           = 2,
 566                 .gpiomask       = 0x01fe00,
 567                 .muxsel         = MUXSEL(2, 3, 1, 1),
 568                 /* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */
 569                 .gpiomux        = { 0x001e00, 0, 0x018000, 0x014000 },
 570                 .gpiomute       = 0x002000,
 571                 .pll            = PLL_28,
 572                 .tuner_type     = UNSET,
 573                 .tuner_addr     = ADDR_UNSET,
 574         },
 575         [BTTV_BOARD_WINVIEW_601] = {
 576                 .name           = "Leadtek WinView 601",
 577                 .video_inputs   = 3,
 578                 /* .audio_inputs= 1, */
 579                 .svhs           = 2,
 580                 .gpiomask       = 0x8300f8,
 581                 .muxsel         = MUXSEL(2, 3, 1, 1, 0),
 582                 .gpiomux        = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 },
 583                 .gpiomute       = 0xcfa007,
 584                 .tuner_type     = UNSET,
 585                 .tuner_addr     = ADDR_UNSET,
 586                 .volume_gpio    = winview_volume,
 587                 .has_radio      = 1,
 588         },
 589         [BTTV_BOARD_AVEC_INTERCAP] = {
 590                 .name           = "AVEC Intercapture",
 591                 .video_inputs   = 3,
 592                 /* .audio_inputs= 2, */
 593                 .svhs           = 2,
 594                 .gpiomask       = 0,
 595                 .muxsel         = MUXSEL(2, 3, 1, 1),
 596                 .gpiomux        = { 1, 0, 0, 0 },
 597                 .tuner_type     = UNSET,
 598                 .tuner_addr     = ADDR_UNSET,
 599         },
 600         [BTTV_BOARD_LIFE_FLYKIT] = {
 601                 .name           = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
 602                 .video_inputs   = 4,
 603                 /* .audio_inputs= 1, */
 604                 .svhs           = NO_SVHS,
 605                 .gpiomask       = 0x8dff00,
 606                 .muxsel         = MUXSEL(2, 3, 1, 1),
 607                 .gpiomux        = { 0 },
 608                 .no_msp34xx     = 1,
 609                 .tuner_type     = TUNER_ABSENT,
 610                 .tuner_addr     = ADDR_UNSET,
 611         },
 612
 613         /* ---- card 0x14 ---------------------------------- */
 614         [BTTV_BOARD_CEI_RAFFLES] = {
 615                 .name           = "CEI Raffles Card",
 616                 .video_inputs   = 3,
 617                 /* .audio_inputs= 3, */
 618                 .svhs           = 2,
 619                 .muxsel         = MUXSEL(2, 3, 1, 1),
 620                 .tuner_type     = UNSET,
 621                 .tuner_addr     = ADDR_UNSET,
 622         },
 623         [BTTV_BOARD_CONFERENCETV] = {
 624                 .name           = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
 625                 .video_inputs   = 4,
 626                 /* .audio_inputs= 2,  tuner, line in */
 627                 .svhs           = 2,
 628                 .gpiomask       = 0x1800,
 629                 .muxsel         = MUXSEL(2, 3, 1, 1),
 630                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
 631                 .gpiomute       = 0x1800,
 632                 .pll            = PLL_28,
 633                 .tuner_type     = TUNER_PHILIPS_PAL_I,
 634                 .tuner_addr     = ADDR_UNSET,
 635         },
 636         [BTTV_BOARD_PHOEBE_TVMAS] = {
 637                 .name           = "Askey CPH050/ Phoebe Tv Master + FM",
 638                 .video_inputs   = 3,
 639                 /* .audio_inputs= 1, */
 640                 .svhs           = 2,
 641                 .gpiomask       = 0xc00,
 642                 .muxsel         = MUXSEL(2, 3, 1, 1),
 643                 .gpiomux        = { 0, 1, 0x800, 0x400 },
 644                 .gpiomute       = 0xc00,
 645                 .pll            = PLL_28,
 646                 .tuner_type     = UNSET,
 647                 .tuner_addr     = ADDR_UNSET,
 648         },
 649         [BTTV_BOARD_MODTEC_205] = {
 650                 .name           = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
 651                 .video_inputs   = 3,
 652                 /* .audio_inputs= 1, */
 653                 .svhs           = NO_SVHS,
 654                 .has_dig_in     = 1,
 655                 .gpiomask       = 7,
 656                 .muxsel         = MUXSEL(2, 3, 0), /* input 2 is digital */
 657                 /* .digital_mode= DIGITAL_MODE_CAMERA, */
 658                 .gpiomux        = { 0, 0, 0, 0 },
 659                 .no_msp34xx     = 1,
 660                 .pll            = PLL_28,
 661                 .tuner_type     = TUNER_ALPS_TSBB5_PAL_I,
 662                 .tuner_addr     = ADDR_UNSET,
 663         },
 664
 665         /* ---- card 0x18 ---------------------------------- */
 666         [BTTV_BOARD_MAGICTVIEW061] = {
 667                 .name           = "Askey CPH05X/06X (bt878) [many vendors]",
 668                 .video_inputs   = 3,
 669                 /* .audio_inputs= 1, */
 670                 .svhs           = 2,
 671                 .gpiomask       = 0xe00,
 672                 .muxsel         = MUXSEL(2, 3, 1, 1),
 673                 .gpiomux        = {0x400, 0x400, 0x400, 0x400 },
 674                 .gpiomute       = 0xc00,
 675                 .pll            = PLL_28,
 676                 .tuner_type     = UNSET,
 677                 .tuner_addr     = ADDR_UNSET,
 678                 .has_remote     = 1,
 679                 .has_radio      = 1,  /* not every card has radio */
 680         },
 681         [BTTV_BOARD_VOBIS_BOOSTAR] = {
 682                 .name           = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
 683                 .video_inputs   = 3,
 684                 /* .audio_inputs= 1, */
 685                 .svhs           = 2,
 686                 .gpiomask       = 0x1f0fff,
 687                 .muxsel         = MUXSEL(2, 3, 1, 1),
 688                 .gpiomux        = { 0x20000, 0x30000, 0x10000, 0 },
 689                 .gpiomute       = 0x40000,
 690                 .tuner_type     = TUNER_PHILIPS_PAL,
 691                 .tuner_addr     = ADDR_UNSET,
 692                 .audio_mode_gpio= terratv_audio,
 693         },
 694         [BTTV_BOARD_HAUPPAUG_WCAM] = {
 695                 .name           = "Hauppauge WinCam newer (bt878)",
 696                 .video_inputs   = 4,
 697                 /* .audio_inputs= 1, */
 698                 .svhs           = 3,
 699                 .gpiomask       = 7,
 700                 .muxsel         = MUXSEL(2, 0, 1, 1),
 701                 .gpiomux        = { 0, 1, 2, 3 },
 702                 .gpiomute       = 4,
 703                 .tuner_type     = UNSET,
 704                 .tuner_addr     = ADDR_UNSET,
 705         },
 706         [BTTV_BOARD_MAXI] = {
 707                 .name           = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
 708                 .video_inputs   = 4,
 709                 /* .audio_inputs= 2, */
 710                 .svhs           = 2,
 711                 .gpiomask       = 0x1800,
 712                 .muxsel         = MUXSEL(2, 3, 1, 1),
 713                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
 714                 .gpiomute       = 0x1800,
 715                 .pll            = PLL_28,
 716                 .tuner_type     = TUNER_PHILIPS_SECAM,
 717                 .tuner_addr     = ADDR_UNSET,
 718         },
 719
 720         /* ---- card 0x1c ---------------------------------- */
 721         [BTTV_BOARD_TERRATV] = {
 722                 .name           = "Terratec TerraTV+ Version 1.1 (bt878)",
 723                 .video_inputs   = 3,
 724                 /* .audio_inputs= 1, */
 725                 .svhs           = 2,
 726                 .gpiomask       = 0x1f0fff,
 727                 .muxsel         = MUXSEL(2, 3, 1, 1),
 728                 .gpiomux        = { 0x20000, 0x30000, 0x10000, 0x00000 },
 729                 .gpiomute       = 0x40000,
 730                 .tuner_type     = TUNER_PHILIPS_PAL,
 731                 .tuner_addr     = ADDR_UNSET,
 732                 .audio_mode_gpio= terratv_audio,
 733                 /* GPIO wiring:
 734                 External 20 pin connector (for Active Radio Upgrade board)
 735                 gpio00: i2c-sda
 736                 gpio01: i2c-scl
 737                 gpio02: om5610-data
 738                 gpio03: om5610-clk
 739                 gpio04: om5610-wre
 740                 gpio05: om5610-stereo
 741                 gpio06: rds6588-davn
 742                 gpio07: Pin 7 n.c.
 743                 gpio08: nIOW
 744                 gpio09+10: nIOR, nSEL ?? (bt878)
 745                         gpio09: nIOR (bt848)
 746                         gpio10: nSEL (bt848)
 747                 Sound Routing:
 748                 gpio16: u2-A0 (1st 4052bt)
 749                 gpio17: u2-A1
 750                 gpio18: u2-nEN
 751                 gpio19: u4-A0 (2nd 4052)
 752                 gpio20: u4-A1
 753                         u4-nEN - GND
 754                 Btspy:
 755                         00000 : Cdrom (internal audio input)
 756                         10000 : ext. Video audio input
 757                         20000 : TV Mono
 758                         a0000 : TV Mono/2
 759                 1a0000 : TV Stereo
 760                         30000 : Radio
 761                         40000 : Mute
 762         */
 763
 764         },
 765         [BTTV_BOARD_PXC200] = {
 766                 /* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
 767                 .name           = "Imagenation PXC200",
 768                 .video_inputs   = 5,
 769                 /* .audio_inputs= 1, */
 770                 .svhs           = 1, /* was: 4 */
 771                 .gpiomask       = 0,
 772                 .muxsel         = MUXSEL(2, 3, 1, 0, 0),
 773                 .gpiomux        = { 0 },
 774                 .tuner_type     = TUNER_ABSENT,
 775                 .tuner_addr     = ADDR_UNSET,
 776                 .muxsel_hook    = PXC200_muxsel,
 777
 778         },
 779         [BTTV_BOARD_FLYVIDEO_98] = {
 780                 .name           = "Lifeview FlyVideo 98 LR50",
 781                 .video_inputs   = 4,
 782                 /* .audio_inputs= 1, */
 783                 .svhs           = 2,
 784                 .gpiomask       = 0x1800,  /* 0x8dfe00 */
 785                 .muxsel         = MUXSEL(2, 3, 1, 1),
 786                 .gpiomux        = { 0, 0x0800, 0x1000, 0x1000 },
 787                 .gpiomute       = 0x1800,
 788                 .pll            = PLL_28,
 789                 .tuner_type     = UNSET,
 790                 .tuner_addr     = ADDR_UNSET,
 791         },
 792         [BTTV_BOARD_IPROTV] = {
 793                 .name           = "Formac iProTV, Formac ProTV I (bt848)",
 794                 .video_inputs   = 4,
 795                 /* .audio_inputs= 1, */
 796                 .svhs           = 3,
 797                 .gpiomask       = 1,
 798                 .muxsel         = MUXSEL(2, 3, 1, 1),
 799                 .gpiomux        = { 1, 0, 0, 0 },
 800                 .pll            = PLL_28,
 801                 .tuner_type     = TUNER_PHILIPS_PAL,
 802                 .tuner_addr     = ADDR_UNSET,
 803         },
 804
 805         /* ---- card 0x20 ---------------------------------- */
 806         [BTTV_BOARD_INTEL_C_S_PCI] = {
 807                 .name           = "Intel Create and Share PCI/ Smart Video Recorder III",
 808                 .video_inputs   = 4,
 809                 /* .audio_inputs= 0, */
 810                 .svhs           = 2,
 811                 .gpiomask       = 0,
 812                 .muxsel         = MUXSEL(2, 3, 1, 1),
 813                 .gpiomux        = { 0 },
 814                 .tuner_type     = TUNER_ABSENT,
 815                 .tuner_addr     = ADDR_UNSET,
 816         },
 817         [BTTV_BOARD_TERRATVALUE] = {
 818                 .name           = "Terratec TerraTValue Version Bt878",
 819                 .video_inputs   = 3,
 820                 /* .audio_inputs= 1, */
 821                 .svhs           = 2,
 822                 .gpiomask       = 0xffff00,
 823                 .muxsel         = MUXSEL(2, 3, 1, 1),
 824                 .gpiomux        = { 0x500, 0, 0x300, 0x900 },
 825                 .gpiomute       = 0x900,
 826                 .pll            = PLL_28,
 827                 .tuner_type     = TUNER_PHILIPS_PAL,
 828                 .tuner_addr     = ADDR_UNSET,
 829         },
 830         [BTTV_BOARD_WINFAST2000] = {
 831                 .name           = "Leadtek WinFast 2000/ WinFast 2000 XP",
 832                 .video_inputs   = 4,
 833                 /* .audio_inputs= 1, */
 834                 .svhs           = 2,
 835                 /* TV, CVid, SVid, CVid over SVid connector */
 836                 .muxsel         = MUXSEL(2, 3, 1, 1, 0),
 837                 /* Alexander Varakin <avarakin@hotmail.com> [stereo version] */
 838                 .gpiomask       = 0xb33000,
 839                 .gpiomux        = { 0x122000,0x1000,0x0000,0x620000 },
 840                 .gpiomute       = 0x800000,
 841                 /* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
 842                         gpio23 -- hef4052:nEnable (0x800000)
 843                         gpio12 -- hef4052:A1
 844                         gpio13 -- hef4052:A0
 845                 0x0000: external audio
 846                 0x1000: FM
 847                 0x2000: TV
 848                 0x3000: n.c.
 849                 Note: There exists another variant "Winfast 2000" with tv stereo !?
 850                 Note: eeprom only contains FF and pci subsystem id 107d:6606
 851                 */
 852                 .pll            = PLL_28,
 853                 .has_radio      = 1,
 854                 .tuner_type     = TUNER_PHILIPS_PAL, /* default for now, gpio reads BFFF06 for Pal bg+dk */
 855                 .tuner_addr     = ADDR_UNSET,
 856                 .audio_mode_gpio= winfast2000_audio,
 857                 .has_remote     = 1,
 858         },
 859         [BTTV_BOARD_CHRONOS_VS2] = {
 860                 .name           = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II",
 861                 .video_inputs   = 4,
 862                 /* .audio_inputs= 3, */
 863                 .svhs           = 2,
 864                 .gpiomask       = 0x1800,
 865                 .muxsel         = MUXSEL(2, 3, 1, 1),
 866                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
 867                 .gpiomute       = 0x1800,
 868                 .pll            = PLL_28,
 869                 .tuner_type     = UNSET,
 870                 .tuner_addr     = ADDR_UNSET,
 871         },
 872
 873         /* ---- card 0x24 ---------------------------------- */
 874         [BTTV_BOARD_TYPHOON_TVIEW] = {
 875                 .name           = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner",
 876                 .video_inputs   = 4,
 877                 /* .audio_inputs= 3, */
 878                 .svhs           = 2,
 879                 .gpiomask       = 0x1800,
 880                 .muxsel         = MUXSEL(2, 3, 1, 1),
 881                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
 882                 .gpiomute       = 0x1800,
 883                 .pll            = PLL_28,
 884                 .tuner_type     = UNSET,
 885                 .tuner_addr     = ADDR_UNSET,
 886                 .has_radio      = 1,
 887         },
 888         [BTTV_BOARD_PXELVWPLTVPRO] = {
 889                 .name           = "Prolink PixelView PlayTV pro",
 890                 .video_inputs   = 3,
 891                 /* .audio_inputs= 1, */
 892                 .svhs           = 2,
 893                 .gpiomask       = 0xff,
 894                 .muxsel         = MUXSEL(2, 3, 1, 1),
 895                 .gpiomux        = { 0x21, 0x20, 0x24, 0x2c },
 896                 .gpiomute       = 0x29,
 897                 .no_msp34xx     = 1,
 898                 .pll            = PLL_28,
 899                 .tuner_type     = UNSET,
 900                 .tuner_addr     = ADDR_UNSET,
 901         },
 902         [BTTV_BOARD_MAGICTVIEW063] = {
 903                 .name           = "Askey CPH06X TView99",
 904                 .video_inputs   = 4,
 905                 /* .audio_inputs= 1, */
 906                 .svhs           = 2,
 907                 .gpiomask       = 0x551e00,
 908                 .muxsel         = MUXSEL(2, 3, 1, 0),
 909                 .gpiomux        = { 0x551400, 0x551200, 0, 0 },
 910                 .gpiomute       = 0x551c00,
 911                 .pll            = PLL_28,
 912                 .tuner_type     = TUNER_PHILIPS_PAL_I,
 913                 .tuner_addr     = ADDR_UNSET,
 914                 .has_remote     = 1,
 915         },
 916         [BTTV_BOARD_PINNACLE] = {
 917                 .name           = "Pinnacle PCTV Studio/Rave",
 918                 .video_inputs   = 3,
 919                 /* .audio_inputs= 1, */
 920                 .svhs           = 2,
 921                 .gpiomask       = 0x03000F,
 922                 .muxsel         = MUXSEL(2, 3, 1, 1),
 923                 .gpiomux        = { 2, 0xd0001, 0, 0 },
 924                 .gpiomute       = 1,
 925                 .pll            = PLL_28,
 926                 .tuner_type     = UNSET,
 927                 .tuner_addr     = ADDR_UNSET,
 928         },
 929
 930         /* ---- card 0x28 ---------------------------------- */
 931         [BTTV_BOARD_STB2] = {
 932                 .name           = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100",
 933                 .video_inputs   = 3,
 934                 /* .audio_inputs= 1, */
 935                 .svhs           = 2,
 936                 .gpiomask       = 7,
 937                 .muxsel         = MUXSEL(2, 3, 1, 1),
 938                 .gpiomux        = { 4, 0, 2, 3 },
 939                 .gpiomute       = 1,
 940                 .no_msp34xx     = 1,
 941                 .tuner_type     = TUNER_PHILIPS_NTSC,
 942                 .tuner_addr     = ADDR_UNSET,
 943                 .pll            = PLL_28,
 944                 .has_radio      = 1,
 945         },
 946         [BTTV_BOARD_AVPHONE98] = {
 947                 .name           = "AVerMedia TVPhone 98",
 948                 .video_inputs   = 3,
 949                 /* .audio_inputs= 4, */
 950                 .svhs           = 2,
 951                 .gpiomask       = 15,
 952                 .muxsel         = MUXSEL(2, 3, 1, 1),
 953                 .gpiomux        = { 13, 4, 11, 7 },
 954                 .pll            = PLL_28,
 955                 .tuner_type     = UNSET,
 956                 .tuner_addr     = ADDR_UNSET,
 957                 .has_radio      = 1,
 958                 .audio_mode_gpio= avermedia_tvphone_audio,
 959         },
 960         [BTTV_BOARD_PV951] = {
 961                 .name           = "ProVideo PV951", /* pic16c54 */
 962                 .video_inputs   = 3,
 963                 /* .audio_inputs= 1, */
 964                 .svhs           = 2,
 965                 .gpiomask       = 0,
 966                 .muxsel         = MUXSEL(2, 3, 1, 1),
 967                 .gpiomux        = { 0, 0, 0, 0},
 968                 .no_msp34xx     = 1,
 969                 .pll            = PLL_28,
 970                 .tuner_type     = TUNER_PHILIPS_PAL_I,
 971                 .tuner_addr     = ADDR_UNSET,
 972         },
 973         [BTTV_BOARD_ONAIR_TV] = {
 974                 .name           = "Little OnAir TV",
 975                 .video_inputs   = 3,
 976                 /* .audio_inputs= 1, */
 977                 .svhs           = 2,
 978                 .gpiomask       = 0xe00b,
 979                 .muxsel         = MUXSEL(2, 3, 1, 1),
 980                 .gpiomux        = { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0 },
 981                 .gpiomute       = 0xff3ffc,
 982                 .no_msp34xx     = 1,
 983                 .tuner_type     = UNSET,
 984                 .tuner_addr     = ADDR_UNSET,
 985         },
 986
 987         /* ---- card 0x2c ---------------------------------- */
 988         [BTTV_BOARD_SIGMA_TVII_FM] = {
 989                 .name           = "Sigma TVII-FM",
 990                 .video_inputs   = 2,
 991                 /* .audio_inputs= 1, */
 992                 .svhs           = NO_SVHS,
 993                 .gpiomask       = 3,
 994                 .muxsel         = MUXSEL(2, 3, 1, 1),
 995                 .gpiomux        = { 1, 1, 0, 2 },
 996                 .gpiomute       = 3,
 997                 .no_msp34xx     = 1,
 998                 .pll            = PLL_NONE,
 999                 .tuner_type     = UNSET,
1000                 .tuner_addr     = ADDR_UNSET,
1001         },
1002         [BTTV_BOARD_MATRIX_VISION2] = {
1003                 .name           = "MATRIX-Vision MV-Delta 2",
1004                 .video_inputs   = 5,
1005                 /* .audio_inputs= 1, */
1006                 .svhs           = 3,
1007                 .gpiomask       = 0,
1008                 .muxsel         = MUXSEL(2, 3, 1, 0, 0),
1009                 .gpiomux        = { 0 },
1010                 .no_msp34xx     = 1,
1011                 .pll            = PLL_28,
1012                 .tuner_type     = TUNER_ABSENT,
1013                 .tuner_addr     = ADDR_UNSET,
1014         },
1015         [BTTV_BOARD_ZOLTRIX_GENIE] = {
1016                 .name           = "Zoltrix Genie TV/FM",
1017                 .video_inputs   = 3,
1018                 /* .audio_inputs= 1, */
1019                 .svhs           = 2,
1020                 .gpiomask       = 0xbcf03f,
1021                 .muxsel         = MUXSEL(2, 3, 1, 1),
1022                 .gpiomux        = { 0xbc803f, 0xbc903f, 0xbcb03f, 0 },
1023                 .gpiomute       = 0xbcb03f,
1024                 .no_msp34xx     = 1,
1025                 .pll            = PLL_28,
1026                 .tuner_type     = TUNER_TEMIC_4039FR5_NTSC,
1027                 .tuner_addr     = ADDR_UNSET,
1028         },
1029         [BTTV_BOARD_TERRATVRADIO] = {
1030                 .name           = "Terratec TV/Radio+",
1031                 .video_inputs   = 3,
1032                 /* .audio_inputs= 1, */
1033                 .svhs           = 2,
1034                 .gpiomask       = 0x70000,
1035                 .muxsel         = MUXSEL(2, 3, 1, 1),
1036                 .gpiomux        = { 0x20000, 0x30000, 0x10000, 0 },
1037                 .gpiomute       = 0x40000,
1038                 .no_msp34xx     = 1,
1039                 .pll            = PLL_35,
1040                 .tuner_type     = TUNER_PHILIPS_PAL_I,
1041                 .tuner_addr     = ADDR_UNSET,
1042                 .has_radio      = 1,
1043         },
1044
1045         /* ---- card 0x30 ---------------------------------- */
1046         [BTTV_BOARD_DYNALINK] = {
1047                 .name           = "Askey CPH03x/ Dynalink Magic TView",
1048                 .video_inputs   = 3,
1049                 /* .audio_inputs= 1, */
1050                 .svhs           = 2,
1051                 .gpiomask       = 15,
1052                 .muxsel         = MUXSEL(2, 3, 1, 1),
1053                 .gpiomux        = {2,0,0,0 },
1054                 .gpiomute       = 1,
1055                 .pll            = PLL_28,
1056                 .tuner_type     = UNSET,
1057                 .tuner_addr     = ADDR_UNSET,
1058         },
1059         [BTTV_BOARD_GVBCTV3PCI] = {
1060                 .name           = "IODATA GV-BCTV3/PCI",
1061                 .video_inputs   = 3,
1062                 /* .audio_inputs= 1, */
1063                 .svhs           = 2,
1064                 .gpiomask       = 0x010f00,
1065                 .muxsel         = MUXSEL(2, 3, 0, 0),
1066                 .gpiomux        = {0x10000, 0, 0x10000, 0 },
1067                 .no_msp34xx     = 1,
1068                 .pll            = PLL_28,
1069                 .tuner_type     = TUNER_ALPS_TSHC6_NTSC,
1070                 .tuner_addr     = ADDR_UNSET,
1071                 .audio_mode_gpio= gvbctv3pci_audio,
1072         },
1073         [BTTV_BOARD_PXELVWPLTVPAK] = {
1074                 .name           = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
1075                 .video_inputs   = 5,
1076                 /* .audio_inputs= 1, */
1077                 .svhs           = 3,
1078                 .has_dig_in     = 1,
1079                 .gpiomask       = 0xAA0000,
1080                 .muxsel         = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */
1081                 /* .digital_mode= DIGITAL_MODE_CAMERA, */
1082                 .gpiomux        = { 0x20000, 0, 0x80000, 0x80000 },
1083                 .gpiomute       = 0xa8000,
1084                 .no_msp34xx     = 1,
1085                 .pll            = PLL_28,
1086                 .tuner_type     = TUNER_PHILIPS_PAL_I,
1087                 .tuner_addr     = ADDR_UNSET,
1088                 .has_remote     = 1,
1089                 /* GPIO wiring: (different from Rev.4C !)
1090                         GPIO17: U4.A0 (first hef4052bt)
1091                         GPIO19: U4.A1
1092                         GPIO20: U5.A1 (second hef4052bt)
1093                         GPIO21: U4.nEN
1094                         GPIO22: BT832 Reset Line
1095                         GPIO23: A5,A0, U5,nEN
1096                 Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
1097                 */
1098         },
1099         [BTTV_BOARD_EAGLE] = {
1100                 .name           = "Eagle Wireless Capricorn2 (bt878A)",
1101                 .video_inputs   = 4,
1102                 /* .audio_inputs= 1, */
1103                 .svhs           = 2,
1104                 .gpiomask       = 7,
1105                 .muxsel         = MUXSEL(2, 0, 1, 1),
1106                 .gpiomux        = { 0, 1, 2, 3 },
1107                 .gpiomute       = 4,
1108                 .pll            = PLL_28,
1109                 .tuner_type     = UNSET /* TUNER_ALPS_TMDH2_NTSC */,
1110                 .tuner_addr     = ADDR_UNSET,
1111         },
1112
1113         /* ---- card 0x34 ---------------------------------- */
1114         [BTTV_BOARD_PINNACLEPRO] = {
1115                 /* David Härdeman <david@2gen.com> */
1116                 .name           = "Pinnacle PCTV Studio Pro",
1117                 .video_inputs   = 4,
1118                 /* .audio_inputs= 1, */
1119                 .svhs           = 3,
1120                 .gpiomask       = 0x03000F,
1121                 .muxsel         = MUXSEL(2, 3, 1, 1),
1122                 .gpiomux        = { 1, 0xd0001, 0, 0 },
1123                 .gpiomute       = 10,
1124                                 /* sound path (5 sources):
1125                                 MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
1126                                         0= ext. Audio IN
1127                                         1= from MUX2
1128                                         2= Mono TV sound from Tuner
1129                                         3= not connected
1130                                 MUX2 (mask 0x30000):
1131                                         0,2,3= from MSP34xx
1132                                         1= FM stereo Radio from Tuner */
1133                 .pll            = PLL_28,
1134                 .tuner_type     = UNSET,
1135                 .tuner_addr     = ADDR_UNSET,
1136         },
1137         [BTTV_BOARD_TVIEW_RDS_FM] = {
1138                 /* Claas Langbehn <claas@bigfoot.com>,
1139                 Sven Grothklags <sven@upb.de> */
1140                 .name           = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
1141                 .video_inputs   = 4,
1142                 /* .audio_inputs= 3, */
1143                 .svhs           = 2,
1144                 .gpiomask       = 0x1c,
1145                 .muxsel         = MUXSEL(2, 3, 1, 1),
1146                 .gpiomux        = { 0, 0, 0x10, 8 },
1147                 .gpiomute       = 4,
1148                 .pll            = PLL_28,
1149                 .tuner_type     = TUNER_PHILIPS_PAL,
1150                 .tuner_addr     = ADDR_UNSET,
1151                 .has_radio      = 1,
1152         },
1153         [BTTV_BOARD_LIFETEC_9415] = {
1154                 /* Tim Röstermundt <rosterm@uni-muenster.de>
1155                 in de.comp.os.unix.linux.hardware:
1156                         options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
1157                         gpiomux =0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
1158                         options tuner type=5 */
1159                 .name           = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
1160                 .video_inputs   = 4,
1161                 /* .audio_inputs= 1, */
1162                 .svhs           = 2,
1163                 .gpiomask       = 0x18e0,
1164                 .muxsel         = MUXSEL(2, 3, 1, 1),
1165                 .gpiomux        = { 0x0000,0x0800,0x1000,0x1000 },
1166                 .gpiomute       = 0x18e0,
1167                         /* For cards with tda9820/tda9821:
1168                                 0x0000: Tuner normal stereo
1169                                 0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
1170                                 0x0880: Tuner A2 stereo */
1171                 .pll            = PLL_28,
1172                 .tuner_type     = UNSET,
1173                 .tuner_addr     = ADDR_UNSET,
1174         },
1175         [BTTV_BOARD_BESTBUY_EASYTV] = {
1176                 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1177                 old Easy TV BT848 version (model CPH031) */
1178                 .name           = "Askey CPH031/ BESTBUY Easy TV",
1179                 .video_inputs   = 4,
1180                 /* .audio_inputs= 1, */
1181                 .svhs           = 2,
1182                 .gpiomask       = 0xF,
1183                 .muxsel         = MUXSEL(2, 3, 1, 0),
1184                 .gpiomux        = { 2, 0, 0, 0 },
1185                 .gpiomute       = 10,
1186                 .pll            = PLL_28,
1187                 .tuner_type     = TUNER_TEMIC_PAL,
1188                 .tuner_addr     = ADDR_UNSET,
1189         },
1190
1191         /* ---- card 0x38 ---------------------------------- */
1192         [BTTV_BOARD_FLYVIDEO_98FM] = {
1193                 /* Gordon Heydon <gjheydon@bigfoot.com ('98) */
1194                 .name           = "Lifeview FlyVideo 98FM LR50",
1195                 .video_inputs   = 4,
1196                 /* .audio_inputs= 3, */
1197                 .svhs           = 2,
1198                 .gpiomask       = 0x1800,
1199                 .muxsel         = MUXSEL(2, 3, 1, 1),
1200                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
1201                 .gpiomute       = 0x1800,
1202                 .pll            = PLL_28,
1203                 .tuner_type     = TUNER_PHILIPS_PAL,
1204                 .tuner_addr     = ADDR_UNSET,
1205         },
1206                 /* This is the ultimate cheapo capture card
1207                 * just a BT848A on a small PCB!
1208                 * Steve Hosgood <steve@equiinet.com> */
1209         [BTTV_BOARD_GRANDTEC] = {
1210                 .name           = "GrandTec 'Grand Video Capture' (Bt848)",
1211                 .video_inputs   = 2,
1212                 /* .audio_inputs= 0, */
1213                 .svhs           = 1,
1214                 .gpiomask       = 0,
1215                 .muxsel         = MUXSEL(3, 1),
1216                 .gpiomux        = { 0 },
1217                 .no_msp34xx     = 1,
1218                 .pll            = PLL_35,
1219                 .tuner_type     = TUNER_ABSENT,
1220                 .tuner_addr     = ADDR_UNSET,
1221         },
1222         [BTTV_BOARD_ASKEY_CPH060] = {
1223                 /* Daniel Herrington <daniel.herrington@home.com> */
1224                 .name           = "Askey CPH060/ Phoebe TV Master Only (No FM)",
1225                 .video_inputs   = 3,
1226                 /* .audio_inputs= 1, */
1227                 .svhs           = 2,
1228                 .gpiomask       = 0xe00,
1229                 .muxsel         = MUXSEL(2, 3, 1, 1),
1230                 .gpiomux        = { 0x400, 0x400, 0x400, 0x400 },
1231                 .gpiomute       = 0x800,
1232                 .pll            = PLL_28,
1233                 .tuner_type     = TUNER_TEMIC_4036FY5_NTSC,
1234                 .tuner_addr     = ADDR_UNSET,
1235         },
1236         [BTTV_BOARD_ASKEY_CPH03X] = {
1237                 /* Matti Mottus <mottus@physic.ut.ee> */
1238                 .name           = "Askey CPH03x TV Capturer",
1239                 .video_inputs   = 4,
1240                 /* .audio_inputs= 1, */
1241                 .svhs           = 2,
1242                 .gpiomask       = 0x03000F,
1243                 .muxsel         = MUXSEL(2, 3, 1, 0),
1244                 .gpiomux        = { 2, 0, 0, 0 },
1245                 .gpiomute       = 1,
1246                 .pll            = PLL_28,
1247                 .tuner_type     = TUNER_TEMIC_PAL,
1248                 .tuner_addr     = ADDR_UNSET,
1249                 .has_remote     = 1,
1250         },
1251
1252         /* ---- card 0x3c ---------------------------------- */
1253         [BTTV_BOARD_MM100PCTV] = {
1254                 /* Philip Blundell <philb@gnu.org> */
1255                 .name           = "Modular Technology MM100PCTV",
1256                 .video_inputs   = 2,
1257                 /* .audio_inputs= 2, */
1258                 .svhs           = NO_SVHS,
1259                 .gpiomask       = 11,
1260                 .muxsel         = MUXSEL(2, 3, 1, 1),
1261                 .gpiomux        = { 2, 0, 0, 1 },
1262                 .gpiomute       = 8,
1263                 .pll            = PLL_35,
1264                 .tuner_type     = TUNER_TEMIC_PAL,
1265                 .tuner_addr     = ADDR_UNSET,
1266         },
1267         [BTTV_BOARD_GMV1] = {
1268                 /* Adrian Cox <adrian@humboldt.co.uk */
1269                 .name           = "AG Electronics GMV1",
1270                 .video_inputs   = 2,
1271                 /* .audio_inputs= 0, */
1272                 .svhs           = 1,
1273                 .gpiomask       = 0xF,
1274                 .muxsel         = MUXSEL(2, 2),
1275                 .gpiomux        = { },
1276                 .no_msp34xx     = 1,
1277                 .pll            = PLL_28,
1278                 .tuner_type     = TUNER_ABSENT,
1279                 .tuner_addr     = ADDR_UNSET,
1280         },
1281         [BTTV_BOARD_BESTBUY_EASYTV2] = {
1282                 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1283                 new Easy TV BT878 version (model CPH061)
1284                 special thanks to Informatica Mieres for providing the card */
1285                 .name           = "Askey CPH061/ BESTBUY Easy TV (bt878)",
1286                 .video_inputs   = 3,
1287                 /* .audio_inputs= 2, */
1288                 .svhs           = 2,
1289                 .gpiomask       = 0xFF,
1290                 .muxsel         = MUXSEL(2, 3, 1, 0),
1291                 .gpiomux        = { 1, 0, 4, 4 },
1292                 .gpiomute       = 9,
1293                 .pll            = PLL_28,
1294                 .tuner_type     = TUNER_PHILIPS_PAL,
1295                 .tuner_addr     = ADDR_UNSET,
1296         },
1297         [BTTV_BOARD_ATI_TVWONDER] = {
1298                 /* Lukas Gebauer <geby@volny.cz> */
1299                 .name           = "ATI TV-Wonder",
1300                 .video_inputs   = 3,
1301                 /* .audio_inputs= 1, */
1302                 .svhs           = 2,
1303                 .gpiomask       = 0xf03f,
1304                 .muxsel         = MUXSEL(2, 3, 1, 0),
1305                 .gpiomux        = { 0xbffe, 0, 0xbfff, 0 },
1306                 .gpiomute       = 0xbffe,
1307                 .pll            = PLL_28,
1308                 .tuner_type     = TUNER_TEMIC_4006FN5_MULTI_PAL,
1309                 .tuner_addr     = ADDR_UNSET,
1310         },
1311
1312         /* ---- card 0x40 ---------------------------------- */
1313         [BTTV_BOARD_ATI_TVWONDERVE] = {
1314                 /* Lukas Gebauer <geby@volny.cz> */
1315                 .name           = "ATI TV-Wonder VE",
1316                 .video_inputs   = 2,
1317                 /* .audio_inputs= 1, */
1318                 .svhs           = NO_SVHS,
1319                 .gpiomask       = 1,
1320                 .muxsel         = MUXSEL(2, 3, 0, 1),
1321                 .gpiomux        = { 0, 0, 1, 0 },
1322                 .no_msp34xx     = 1,
1323                 .pll            = PLL_28,
1324                 .tuner_type     = TUNER_TEMIC_4006FN5_MULTI_PAL,
1325                 .tuner_addr     = ADDR_UNSET,
1326         },
1327         [BTTV_BOARD_FLYVIDEO2000] = {
1328                 /* DeeJay <deejay@westel900.net (2000S) */
1329                 .name           = "Lifeview FlyVideo 2000S LR90",
1330                 .video_inputs   = 3,
1331                 /* .audio_inputs= 3, */
1332                 .svhs           = 2,
1333                 .gpiomask       = 0x18e0,
1334                 .muxsel         = MUXSEL(2, 3, 0, 1),
1335                                 /* Radio changed from 1e80 to 0x800 to make
1336                                 FlyVideo2000S in .hu happy (gm)*/
1337                                 /* -dk-???: set mute=0x1800 for tda9874h daughterboard */
1338                 .gpiomux        = { 0x0000,0x0800,0x1000,0x1000 },
1339                 .gpiomute       = 0x1800,
1340                 .audio_mode_gpio= fv2000s_audio,
1341                 .no_msp34xx     = 1,
1342                 .pll            = PLL_28,
1343                 .tuner_type     = TUNER_PHILIPS_PAL,
1344                 .tuner_addr     = ADDR_UNSET,
1345         },
1346         [BTTV_BOARD_TERRATVALUER] = {
1347                 .name           = "Terratec TValueRadio",
1348                 .video_inputs   = 3,
1349                 /* .audio_inputs= 1, */
1350                 .svhs           = 2,
1351                 .gpiomask       = 0xffff00,
1352                 .muxsel         = MUXSEL(2, 3, 1, 1),
1353                 .gpiomux        = { 0x500, 0x500, 0x300, 0x900 },
1354                 .gpiomute       = 0x900,
1355                 .pll            = PLL_28,
1356                 .tuner_type     = TUNER_PHILIPS_PAL,
1357                 .tuner_addr     = ADDR_UNSET,
1358                 .has_radio      = 1,
1359         },
1360         [BTTV_BOARD_GVBCTV4PCI] = {
1361                 /* TANAKA Kei <peg00625@nifty.com> */
1362                 .name           = "IODATA GV-BCTV4/PCI",
1363                 .video_inputs   = 3,
1364                 /* .audio_inputs= 1, */
1365                 .svhs           = 2,
1366                 .gpiomask       = 0x010f00,
1367                 .muxsel         = MUXSEL(2, 3, 0, 0),
1368                 .gpiomux        = {0x10000, 0, 0x10000, 0 },
1369                 .no_msp34xx     = 1,
1370                 .pll            = PLL_28,
1371                 .tuner_type     = TUNER_SHARP_2U5JF5540_NTSC,
1372                 .tuner_addr     = ADDR_UNSET,
1373                 .audio_mode_gpio= gvbctv3pci_audio,
1374         },
1375
1376         /* ---- card 0x44 ---------------------------------- */
1377         [BTTV_BOARD_VOODOOTV_FM] = {
1378                 .name           = "3Dfx VoodooTV FM (Euro)",
1379                 /* try "insmod msp3400 simple=0" if you have
1380                 * sound problems with this card. */
1381                 .video_inputs   = 4,
1382                 /* .audio_inputs= 1, */
1383                 .svhs           = NO_SVHS,
1384                 .gpiomask       = 0x4f8a00,
1385                 /* 0x100000: 1=MSP enabled (0=disable again)
1386                 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1387                 .gpiomux        = {0x947fff, 0x987fff,0x947fff,0x947fff },
1388                 .gpiomute       = 0x947fff,
1389                 /* tvtuner, radio,   external,internal, mute,  stereo
1390                 * tuner, Composit, SVid, Composit-on-Svid-adapter */
1391                 .muxsel         = MUXSEL(2, 3, 0, 1),
1392                 .tuner_type     = TUNER_MT2032,
1393                 .tuner_addr     = ADDR_UNSET,
1394                 .pll            = PLL_28,
1395                 .has_radio      = 1,
1396         },
1397         [BTTV_BOARD_VOODOOTV_200] = {
1398                 .name           = "VoodooTV 200 (USA)",
1399                 /* try "insmod msp3400 simple=0" if you have
1400                 * sound problems with this card. */
1401                 .video_inputs   = 4,
1402                 /* .audio_inputs= 1, */
1403                 .svhs           = NO_SVHS,
1404                 .gpiomask       = 0x4f8a00,
1405                 /* 0x100000: 1=MSP enabled (0=disable again)
1406                 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1407                 .gpiomux        = {0x947fff, 0x987fff,0x947fff,0x947fff },
1408                 .gpiomute       = 0x947fff,
1409                 /* tvtuner, radio,   external,internal, mute,  stereo
1410                 * tuner, Composit, SVid, Composit-on-Svid-adapter */
1411                 .muxsel         = MUXSEL(2, 3, 0, 1),
1412                 .tuner_type     = TUNER_MT2032,
1413                 .tuner_addr     = ADDR_UNSET,
1414                 .pll            = PLL_28,
1415                 .has_radio      = 1,
1416         },
1417         [BTTV_BOARD_AIMMS] = {
1418                 /* Philip Blundell <pb@nexus.co.uk> */
1419                 .name           = "Active Imaging AIMMS",
1420                 .video_inputs   = 1,
1421                 /* .audio_inputs= 0, */
1422                 .tuner_type     = TUNER_ABSENT,
1423                 .tuner_addr     = ADDR_UNSET,
1424                 .pll            = PLL_28,
1425                 .muxsel         = MUXSEL(2),
1426                 .gpiomask       = 0
1427         },
1428         [BTTV_BOARD_PV_BT878P_PLUS] = {
1429                 /* Tomasz Pyra <hellfire@sedez.iq.pl> */
1430                 .name           = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
1431                 .video_inputs   = 3,
1432                 /* .audio_inputs= 4, */
1433                 .svhs           = 2,
1434                 .gpiomask       = 15,
1435                 .muxsel         = MUXSEL(2, 3, 1, 1),
1436                 .gpiomux        = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */
1437                 .gpiomute       = 13,
1438                 .pll            = PLL_28,
1439                 .tuner_type     = TUNER_LG_PAL_I_FM,
1440                 .tuner_addr     = ADDR_UNSET,
1441                 .has_remote     = 1,
1442                 /* GPIO wiring:
1443                         GPIO0: U4.A0 (hef4052bt)
1444                         GPIO1: U4.A1
1445                         GPIO2: U4.A1 (second hef4052bt)
1446                         GPIO3: U4.nEN, U5.A0, A5.nEN
1447                         GPIO8-15: vrd866b ?
1448                 */
1449         },
1450         [BTTV_BOARD_FLYVIDEO98EZ] = {
1451                 .name           = "Lifeview FlyVideo 98EZ (capture only) LR51",
1452                 .video_inputs   = 4,
1453                 /* .audio_inputs= 0, */
1454                 .svhs           = 2,
1455                 /* AV1, AV2, SVHS, CVid adapter on SVHS */
1456                 .muxsel         = MUXSEL(2, 3, 1, 1),
1457                 .pll            = PLL_28,
1458                 .no_msp34xx     = 1,
1459                 .tuner_type     = TUNER_ABSENT,
1460                 .tuner_addr     = ADDR_UNSET,
1461         },
1462
1463         /* ---- card 0x48 ---------------------------------- */
1464         [BTTV_BOARD_PV_BT878P_9B] = {
1465                 /* Dariusz Kowalewski <darekk@automex.pl> */
1466                 .name           = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
1467                 .video_inputs   = 4,
1468                 /* .audio_inputs= 1, */
1469                 .svhs           = 2,
1470                 .gpiomask       = 0x3f,
1471                 .muxsel         = MUXSEL(2, 3, 1, 1),
1472                 .gpiomux        = { 0x01, 0x00, 0x03, 0x03 },
1473                 .gpiomute       = 0x09,
1474                 .no_msp34xx     = 1,
1475                 .pll            = PLL_28,
1476                 .tuner_type     = TUNER_PHILIPS_PAL,
1477                 .tuner_addr     = ADDR_UNSET,
1478                 .audio_mode_gpio= pvbt878p9b_audio, /* Note: not all cards have stereo */
1479                 .has_radio      = 1,  /* Note: not all cards have radio */
1480                 .has_remote     = 1,
1481                 /* GPIO wiring:
1482                         GPIO0: A0 hef4052
1483                         GPIO1: A1 hef4052
1484                         GPIO3: nEN hef4052
1485                         GPIO8-15: vrd866b
1486                         GPIO20,22,23: R30,R29,R28
1487                 */
1488         },
1489         [BTTV_BOARD_SENSORAY311_611] = {
1490                 /* Clay Kunz <ckunz@mail.arc.nasa.gov> */
1491                 /* you must jumper JP5 for the 311 card (PC/104+) to work */
1492                 .name           = "Sensoray 311/611",
1493                 .video_inputs   = 5,
1494                 /* .audio_inputs= 0, */
1495                 .svhs           = 4,
1496                 .gpiomask       = 0,
1497                 .muxsel         = MUXSEL(2, 3, 1, 0, 0),
1498                 .gpiomux        = { 0 },
1499                 .tuner_type     = TUNER_ABSENT,
1500                 .tuner_addr     = ADDR_UNSET,
1501         },
1502         [BTTV_BOARD_RV605] = {
1503                 /* Miguel Freitas <miguel@cetuc.puc-rio.br> */
1504                 .name           = "RemoteVision MX (RV605)",
1505                 .video_inputs   = 16,
1506                 /* .audio_inputs= 0, */
1507                 .svhs           = NO_SVHS,
1508                 .gpiomask       = 0x00,
1509                 .gpiomask2      = 0x07ff,
1510                 .muxsel         = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
1511                 .no_msp34xx     = 1,
1512                 .tuner_type     = TUNER_ABSENT,
1513                 .tuner_addr     = ADDR_UNSET,
1514                 .muxsel_hook    = rv605_muxsel,
1515         },
1516         [BTTV_BOARD_POWERCLR_MTV878] = {
1517                 .name           = "Powercolor MTV878/ MTV878R/ MTV878F",
1518                 .video_inputs   = 3,
1519                 /* .audio_inputs= 2, */
1520                 .svhs           = 2,
1521                 .gpiomask       = 0x1C800F,  /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */
1522                 .muxsel         = MUXSEL(2, 1, 1),
1523                 .gpiomux        = { 0, 1, 2, 2 },
1524                 .gpiomute       = 4,
1525                 .tuner_type     = TUNER_PHILIPS_PAL,
1526                 .tuner_addr     = ADDR_UNSET,
1527                 .pll            = PLL_28,
1528                 .has_radio      = 1,
1529         },
1530
1531         /* ---- card 0x4c ---------------------------------- */
1532         [BTTV_BOARD_WINDVR] = {
1533                 /* Masaki Suzuki <masaki@btree.org> */
1534                 .name           = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
1535                 .video_inputs   = 3,
1536                 /* .audio_inputs= 1, */
1537                 .svhs           = 2,
1538                 .gpiomask       = 0x140007,
1539                 .muxsel         = MUXSEL(2, 3, 1, 1),
1540                 .gpiomux        = { 0, 1, 2, 3 },
1541                 .gpiomute       = 4,
1542                 .tuner_type     = TUNER_PHILIPS_NTSC,
1543                 .tuner_addr     = ADDR_UNSET,
1544                 .audio_mode_gpio= windvr_audio,
1545         },
1546         [BTTV_BOARD_GRANDTEC_MULTI] = {
1547                 .name           = "GrandTec Multi Capture Card (Bt878)",
1548                 .video_inputs   = 4,
1549                 /* .audio_inputs= 0, */
1550                 .svhs           = NO_SVHS,
1551                 .gpiomask       = 0,
1552                 .muxsel         = MUXSEL(2, 3, 1, 0),
1553                 .gpiomux        = { 0 },
1554                 .no_msp34xx     = 1,
1555                 .pll            = PLL_28,
1556                 .tuner_type     = TUNER_ABSENT,
1557                 .tuner_addr     = ADDR_UNSET,
1558         },
1559         [BTTV_BOARD_KWORLD] = {
1560                 .name           = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
1561                 .video_inputs   = 4,
1562                 /* .audio_inputs= 3, */
1563                 .svhs           = 2,
1564                 .gpiomask       = 7,
1565                 /* Tuner, SVid, SVHS, SVid to SVHS connector */
1566                 .muxsel         = MUXSEL(2, 3, 1, 1),
1567                 .gpiomux        = { 0, 0, 4, 4 },/* Yes, this tuner uses the same audio output for TV and FM radio!
1568                                                 * This card lacks external Audio In, so we mute it on Ext. & Int.
1569                                                 * The PCB can take a sbx1637/sbx1673, wiring unknown.
1570                                                 * This card lacks PCI subsystem ID, sigh.
1571                                                 * gpiomux =1: lower volume, 2+3: mute
1572                                                 * btwincap uses 0x80000/0x80003
1573                                                 */
1574                 .gpiomute       = 4,
1575                 .no_msp34xx     = 1,
1576                 .pll            = PLL_28,
1577                 .tuner_type     = TUNER_PHILIPS_PAL,
1578                 .tuner_addr     = ADDR_UNSET,
1579                 /* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
1580                 radio signal strength indicators work fine. */
1581                 .has_radio      = 1,
1582                 /* GPIO Info:
1583                         GPIO0,1:   HEF4052 A0,A1
1584                         GPIO2:     HEF4052 nENABLE
1585                         GPIO3-7:   n.c.
1586                         GPIO8-13:  IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card]
1587                         GPIO14,15: ??
1588                         GPIO16-21: n.c.
1589                         GPIO22,23: ??
1590                         ??       : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/
1591         },
1592         [BTTV_BOARD_DSP_TCVIDEO] = {
1593                 /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
1594                 .name           = "DSP Design TCVIDEO",
1595                 .video_inputs   = 4,
1596                 .svhs           = NO_SVHS,
1597                 .muxsel         = MUXSEL(2, 3, 1, 0),
1598                 .pll            = PLL_28,
1599                 .tuner_type     = UNSET,
1600                 .tuner_addr     = ADDR_UNSET,
1601         },
1602
1603                 /* ---- card 0x50 ---------------------------------- */
1604         [BTTV_BOARD_HAUPPAUGEPVR] = {
1605                 .name           = "Hauppauge WinTV PVR",
1606                 .video_inputs   = 4,
1607                 /* .audio_inputs= 1, */
1608                 .svhs           = 2,
1609                 .muxsel         = MUXSEL(2, 0, 1, 1),
1610                 .pll            = PLL_28,
1611                 .tuner_type     = UNSET,
1612                 .tuner_addr     = ADDR_UNSET,
1613
1614                 .gpiomask       = 7,
1615                 .gpiomux        = {7},
1616         },
1617         [BTTV_BOARD_GVBCTV5PCI] = {
1618                 .name           = "IODATA GV-BCTV5/PCI",
1619                 .video_inputs   = 3,
1620                 /* .audio_inputs= 1, */
1621                 .svhs           = 2,
1622                 .gpiomask       = 0x0f0f80,
1623                 .muxsel         = MUXSEL(2, 3, 1, 0),
1624                 .gpiomux        = {0x030000, 0x010000, 0, 0 },
1625                 .gpiomute       = 0x020000,
1626                 .no_msp34xx     = 1,
1627                 .pll            = PLL_28,
1628                 .tuner_type     = TUNER_PHILIPS_NTSC_M,
1629                 .tuner_addr     = ADDR_UNSET,
1630                 .audio_mode_gpio= gvbctv5pci_audio,
1631                 .has_radio      = 1,
1632         },
1633         [BTTV_BOARD_OSPREY1x0] = {
1634                 .name           = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
1635                 .video_inputs   = 4,                  /* id-inputs-clock */
1636                 /* .audio_inputs= 0, */
1637                 .svhs           = 3,
1638                 .muxsel         = MUXSEL(3, 2, 0, 1),
1639                 .pll            = PLL_28,
1640                 .tuner_type     = TUNER_ABSENT,
1641                 .tuner_addr     = ADDR_UNSET,
1642                 .no_msp34xx     = 1,
1643                 .no_tda7432     = 1,
1644         },
1645         [BTTV_BOARD_OSPREY1x0_848] = {
1646                 .name           = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
1647                 .video_inputs   = 3,
1648                 /* .audio_inputs= 0, */
1649                 .svhs           = 2,
1650                 .muxsel         = MUXSEL(2, 3, 1),
1651                 .pll            = PLL_28,
1652                 .tuner_type     = TUNER_ABSENT,
1653                 .tuner_addr     = ADDR_UNSET,
1654                 .no_msp34xx     = 1,
1655                 .no_tda7432     = 1,
1656         },
1657
1658                 /* ---- card 0x54 ---------------------------------- */
1659         [BTTV_BOARD_OSPREY101_848] = {
1660                 .name           = "Osprey 101 (848)", /* 0x05-40C0-C1 */
1661                 .video_inputs   = 2,
1662                 /* .audio_inputs= 0, */
1663                 .svhs           = 1,
1664                 .muxsel         = MUXSEL(3, 1),
1665                 .pll            = PLL_28,
1666                 .tuner_type     = TUNER_ABSENT,
1667                 .tuner_addr     = ADDR_UNSET,
1668                 .no_msp34xx     = 1,
1669                 .no_tda7432     = 1,
1670         },
1671         [BTTV_BOARD_OSPREY1x1] = {
1672                 .name           = "Osprey 101/151",       /* 0x1(4|5)-0004-C4 */
1673                 .video_inputs   = 1,
1674                 /* .audio_inputs= 0, */
1675                 .svhs           = NO_SVHS,
1676                 .muxsel         = MUXSEL(0),
1677                 .pll            = PLL_28,
1678                 .tuner_type     = TUNER_ABSENT,
1679                 .tuner_addr     = ADDR_UNSET,
1680                 .no_msp34xx     = 1,
1681                 .no_tda7432     = 1,
1682         },
1683         [BTTV_BOARD_OSPREY1x1_SVID] = {
1684                 .name           = "Osprey 101/151 w/ svid",  /* 0x(16|17|20)-00C4-C1 */
1685                 .video_inputs   = 2,
1686                 /* .audio_inputs= 0, */
1687                 .svhs           = 1,
1688                 .muxsel         = MUXSEL(0, 1),
1689                 .pll            = PLL_28,
1690                 .tuner_type     = TUNER_ABSENT,
1691                 .tuner_addr     = ADDR_UNSET,
1692                 .no_msp34xx     = 1,
1693                 .no_tda7432     = 1,
1694         },
1695         [BTTV_BOARD_OSPREY2xx] = {
1696                 .name           = "Osprey 200/201/250/251",  /* 0x1(8|9|E|F)-0004-C4 */
1697                 .video_inputs   = 1,
1698                 /* .audio_inputs= 1, */
1699                 .svhs           = NO_SVHS,
1700                 .muxsel         = MUXSEL(0),
1701                 .pll            = PLL_28,
1702                 .tuner_type     = TUNER_ABSENT,
1703                 .tuner_addr     = ADDR_UNSET,
1704                 .no_msp34xx     = 1,
1705                 .no_tda7432     = 1,
1706         },
1707
1708                 /* ---- card 0x58 ---------------------------------- */
1709         [BTTV_BOARD_OSPREY2x0_SVID] = {
1710                 .name           = "Osprey 200/250",   /* 0x1(A|B)-00C4-C1 */
1711                 .video_inputs   = 2,
1712                 /* .audio_inputs= 1, */
1713                 .svhs           = 1,
1714                 .muxsel         = MUXSEL(0, 1),
1715                 .pll            = PLL_28,
1716                 .tuner_type     = TUNER_ABSENT,
1717                 .tuner_addr     = ADDR_UNSET,
1718                 .no_msp34xx     = 1,
1719                 .no_tda7432     = 1,
1720         },
1721         [BTTV_BOARD_OSPREY2x0] = {
1722                 .name           = "Osprey 210/220/230",   /* 0x1(A|B)-04C0-C1 */
1723                 .video_inputs   = 2,
1724                 /* .audio_inputs= 1, */
1725                 .svhs           = 1,
1726                 .muxsel         = MUXSEL(2, 3),
1727                 .pll            = PLL_28,
1728                 .tuner_type     = TUNER_ABSENT,
1729                 .tuner_addr     = ADDR_UNSET,
1730                 .no_msp34xx     = 1,
1731                 .no_tda7432     = 1,
1732         },
1733         [BTTV_BOARD_OSPREY500] = {
1734                 .name           = "Osprey 500",   /* 500 */
1735                 .video_inputs   = 2,
1736                 /* .audio_inputs= 1, */
1737                 .svhs           = 1,
1738                 .muxsel         = MUXSEL(2, 3),
1739                 .pll            = PLL_28,
1740                 .tuner_type     = TUNER_ABSENT,
1741                 .tuner_addr     = ADDR_UNSET,
1742                 .no_msp34xx     = 1,
1743                 .no_tda7432     = 1,
1744         },
1745         [BTTV_BOARD_OSPREY540] = {
1746                 .name           = "Osprey 540",   /* 540 */
1747                 .video_inputs   = 4,
1748                 /* .audio_inputs= 1, */
1749                 .pll            = PLL_28,
1750                 .tuner_type     = TUNER_ABSENT,
1751                 .tuner_addr     = ADDR_UNSET,
1752                 .no_msp34xx     = 1,
1753                 .no_tda7432     = 1,
1754         },
1755
1756                 /* ---- card 0x5C ---------------------------------- */
1757         [BTTV_BOARD_OSPREY2000] = {
1758                 .name           = "Osprey 2000",  /* 2000 */
1759                 .video_inputs   = 2,
1760                 /* .audio_inputs= 1, */
1761                 .svhs           = 1,
1762                 .muxsel         = MUXSEL(2, 3),
1763                 .pll            = PLL_28,
1764                 .tuner_type     = TUNER_ABSENT,
1765                 .tuner_addr     = ADDR_UNSET,
1766                 .no_msp34xx     = 1,
1767                 .no_tda7432     = 1,      /* must avoid, conflicts with the bt860 */
1768         },
1769         [BTTV_BOARD_IDS_EAGLE] = {
1770                 /* M G Berberich <berberic@forwiss.uni-passau.de> */
1771                 .name           = "IDS Eagle",
1772                 .video_inputs   = 4,
1773                 /* .audio_inputs= 0, */
1774                 .tuner_type     = TUNER_ABSENT,
1775                 .tuner_addr     = ADDR_UNSET,
1776                 .svhs           = NO_SVHS,
1777                 .gpiomask       = 0,
1778                 .muxsel         = MUXSEL(2, 2, 2, 2),
1779                 .muxsel_hook    = eagle_muxsel,
1780                 .no_msp34xx     = 1,
1781                 .pll            = PLL_28,
1782         },
1783         [BTTV_BOARD_PINNACLESAT] = {
1784                 .name           = "Pinnacle PCTV Sat",
1785                 .video_inputs   = 2,
1786                 /* .audio_inputs= 0, */
1787                 .svhs           = 1,
1788                 .tuner_type     = TUNER_ABSENT,
1789                 .tuner_addr     = ADDR_UNSET,
1790                 .no_msp34xx     = 1,
1791                 .no_tda7432     = 1,
1792                 .muxsel         = MUXSEL(3, 1),
1793                 .pll            = PLL_28,
1794                 .no_gpioirq     = 1,
1795                 .has_dvb        = 1,
1796         },
1797         [BTTV_BOARD_FORMAC_PROTV] = {
1798                 .name           = "Formac ProTV II (bt878)",
1799                 .video_inputs   = 4,
1800                 /* .audio_inputs= 1, */
1801                 .svhs           = 3,
1802                 .gpiomask       = 2,
1803                 /* TV, Comp1, Composite over SVID con, SVID */
1804                 .muxsel         = MUXSEL(2, 3, 1, 1),
1805                 .gpiomux        = { 2, 2, 0, 0 },
1806                 .pll            = PLL_28,
1807                 .has_radio      = 1,
1808                 .tuner_type     = TUNER_PHILIPS_PAL,
1809                 .tuner_addr     = ADDR_UNSET,
1810         /* sound routing:
1811                 GPIO=0x00,0x01,0x03: mute (?)
1812                 0x02: both TV and radio (tuner: FM1216/I)
1813                 The card has onboard audio connectors labeled "cdrom" and "board",
1814                 not soldered here, though unknown wiring.
1815                 Card lacks: external audio in, pci subsystem id.
1816         */
1817         },
1818
1819                 /* ---- card 0x60 ---------------------------------- */
1820         [BTTV_BOARD_MACHTV] = {
1821                 .name           = "MachTV",
1822                 .video_inputs   = 3,
1823                 /* .audio_inputs= 1, */
1824                 .svhs           = NO_SVHS,
1825                 .gpiomask       = 7,
1826                 .muxsel         = MUXSEL(2, 3, 1, 1),
1827                 .gpiomux        = { 0, 1, 2, 3},
1828                 .gpiomute       = 4,
1829                 .tuner_type     = TUNER_PHILIPS_PAL,
1830                 .tuner_addr     = ADDR_UNSET,
1831                 .pll            = PLL_28,
1832         },
1833         [BTTV_BOARD_EURESYS_PICOLO] = {
1834                 .name           = "Euresys Picolo",
1835                 .video_inputs   = 3,
1836                 /* .audio_inputs= 0, */
1837                 .svhs           = 2,
1838                 .gpiomask       = 0,
1839                 .no_msp34xx     = 1,
1840                 .no_tda7432     = 1,
1841                 .muxsel         = MUXSEL(2, 0, 1),
1842                 .pll            = PLL_28,
1843                 .tuner_type     = TUNER_ABSENT,
1844                 .tuner_addr     = ADDR_UNSET,
1845         },
1846         [BTTV_BOARD_PV150] = {
1847                 /* Luc Van Hoeylandt <luc@e-magic.be> */
1848                 .name           = "ProVideo PV150", /* 0x4f */
1849                 .video_inputs   = 2,
1850                 /* .audio_inputs= 0, */
1851                 .svhs           = NO_SVHS,
1852                 .gpiomask       = 0,
1853                 .muxsel         = MUXSEL(2, 3),
1854                 .gpiomux        = { 0 },
1855                 .no_msp34xx     = 1,
1856                 .pll            = PLL_28,
1857                 .tuner_type     = TUNER_ABSENT,
1858                 .tuner_addr     = ADDR_UNSET,
1859         },
1860         [BTTV_BOARD_AD_TVK503] = {
1861                 /* Hiroshi Takekawa <sian@big.or.jp> */
1862                 /* This card lacks subsystem ID */
1863                 .name           = "AD-TVK503", /* 0x63 */
1864                 .video_inputs   = 4,
1865                 /* .audio_inputs= 1, */
1866                 .svhs           = 2,
1867                 .gpiomask       = 0x001e8007,
1868                 .muxsel         = MUXSEL(2, 3, 1, 0),
1869                 /*                  Tuner, Radio, external, internal, off,  on */
1870                 .gpiomux        = { 0x08,  0x0f,  0x0a,     0x08 },
1871                 .gpiomute       = 0x0f,
1872                 .no_msp34xx     = 1,
1873                 .pll            = PLL_28,
1874                 .tuner_type     = TUNER_PHILIPS_NTSC,
1875                 .tuner_addr     = ADDR_UNSET,
1876                 .audio_mode_gpio= adtvk503_audio,
1877         },
1878
1879                 /* ---- card 0x64 ---------------------------------- */
1880         [BTTV_BOARD_HERCULES_SM_TV] = {
1881                 .name           = "Hercules Smart TV Stereo",
1882                 .video_inputs   = 4,
1883                 /* .audio_inputs= 1, */
1884                 .svhs           = 2,
1885                 .gpiomask       = 0x00,
1886                 .muxsel         = MUXSEL(2, 3, 1, 1),
1887                 .no_msp34xx     = 1,
1888                 .pll            = PLL_28,
1889                 .tuner_type     = TUNER_PHILIPS_PAL,
1890                 .tuner_addr     = ADDR_UNSET,
1891                 /* Notes:
1892                 - card lacks subsystem ID
1893                 - stereo variant w/ daughter board with tda9874a @0xb0
1894                 - Audio Routing:
1895                         always from tda9874 independent of GPIO (?)
1896                         external line in: unknown
1897                 - Other chips: em78p156elp @ 0x96 (probably IR remote control)
1898                         hef4053 (instead 4052) for unknown function
1899                 */
1900         },
1901         [BTTV_BOARD_PACETV] = {
1902                 .name           = "Pace TV & Radio Card",
1903                 .video_inputs   = 4,
1904                 /* .audio_inputs= 1, */
1905                 .svhs           = 2,
1906                 /* Tuner, CVid, SVid, CVid over SVid connector */
1907                 .muxsel         = MUXSEL(2, 3, 1, 1),
1908                 .gpiomask       = 0,
1909                 .no_tda7432     = 1,
1910                 .tuner_type     = TUNER_PHILIPS_PAL_I,
1911                 .tuner_addr     = ADDR_UNSET,
1912                 .has_radio      = 1,
1913                 .pll            = PLL_28,
1914                 /* Bt878, Bt832, FI1246 tuner; no pci subsystem id
1915                 only internal line out: (4pin header) RGGL
1916                 Radio must be decoded by msp3410d (not routed through)*/
1917                 /*
1918                 .digital_mode   = DIGITAL_MODE_CAMERA,  todo!
1919                 */
1920         },
1921         [BTTV_BOARD_IVC200] = {
1922                 /* Chris Willing <chris@vislab.usyd.edu.au> */
1923                 .name           = "IVC-200",
1924                 .video_inputs   = 1,
1925                 /* .audio_inputs= 0, */
1926                 .tuner_type     = TUNER_ABSENT,
1927                 .tuner_addr     = ADDR_UNSET,
1928                 .svhs           = NO_SVHS,
1929                 .gpiomask       = 0xdf,
1930                 .muxsel         = MUXSEL(2),
1931                 .pll            = PLL_28,
1932         },
1933         [BTTV_BOARD_IVCE8784] = {
1934                 .name           = "IVCE-8784",
1935                 .video_inputs   = 1,
1936                 /* .audio_inputs= 0, */
1937                 .tuner_type     = TUNER_ABSENT,
1938                 .tuner_addr     = ADDR_UNSET,
1939                 .svhs           = NO_SVHS,
1940                 .gpiomask       = 0xdf,
1941                 .muxsel         = MUXSEL(2),
1942                 .pll            = PLL_28,
1943         },
1944         [BTTV_BOARD_XGUARD] = {
1945                 .name           = "Grand X-Guard / Trust 814PCI",
1946                 .video_inputs   = 16,
1947                 /* .audio_inputs= 0, */
1948                 .svhs           = NO_SVHS,
1949                 .tuner_type     = TUNER_ABSENT,
1950                 .tuner_addr     = ADDR_UNSET,
1951                 .gpiomask2      = 0xff,
1952                 .muxsel         = MUXSEL(2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0),
1953                 .muxsel_hook    = xguard_muxsel,
1954                 .no_msp34xx     = 1,
1955                 .no_tda7432     = 1,
1956                 .pll            = PLL_28,
1957         },
1958
1959                 /* ---- card 0x68 ---------------------------------- */
1960         [BTTV_BOARD_NEBULA_DIGITV] = {
1961                 .name           = "Nebula Electronics DigiTV",
1962                 .video_inputs   = 1,
1963                 .svhs           = NO_SVHS,
1964                 .muxsel         = MUXSEL(2, 3, 1, 0),
1965                 .no_msp34xx     = 1,
1966                 .no_tda7432     = 1,
1967                 .pll            = PLL_28,
1968                 .tuner_type     = TUNER_ABSENT,
1969                 .tuner_addr     = ADDR_UNSET,
1970                 .has_dvb        = 1,
1971                 .has_remote     = 1,
1972                 .gpiomask       = 0x1b,
1973                 .no_gpioirq     = 1,
1974         },
1975         [BTTV_BOARD_PV143] = {
1976                 /* Jorge Boncompte - DTI2 <jorge@dti2.net> */
1977                 .name           = "ProVideo PV143",
1978                 .video_inputs   = 4,
1979                 /* .audio_inputs= 0, */
1980                 .svhs           = NO_SVHS,
1981                 .gpiomask       = 0,
1982                 .muxsel         = MUXSEL(2, 3, 1, 0),
1983                 .gpiomux        = { 0 },
1984                 .no_msp34xx     = 1,
1985                 .pll            = PLL_28,
1986                 .tuner_type     = TUNER_ABSENT,
1987                 .tuner_addr     = ADDR_UNSET,
1988         },
1989         [BTTV_BOARD_VD009X1_VD011_MINIDIN] = {
1990                 /* M.Klahr@phytec.de */
1991                 .name           = "PHYTEC VD-009-X1 VD-011 MiniDIN (bt878)",
1992                 .video_inputs   = 4,
1993                 /* .audio_inputs= 0, */
1994                 .svhs           = 3,
1995                 .gpiomask       = 0x00,
1996                 .muxsel         = MUXSEL(2, 3, 1, 0),
1997                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
1998                 .pll            = PLL_28,
1999                 .tuner_type     = TUNER_ABSENT,
2000                 .tuner_addr     = ADDR_UNSET,
2001         },
2002         [BTTV_BOARD_VD009X1_VD011_COMBI] = {
2003                 .name           = "PHYTEC VD-009-X1 VD-011 Combi (bt878)",
2004                 .video_inputs   = 4,
2005                 /* .audio_inputs= 0, */
2006                 .svhs           = 3,
2007                 .gpiomask       = 0x00,
2008                 .muxsel         = MUXSEL(2, 3, 1, 1),
2009                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2010                 .pll            = PLL_28,
2011                 .tuner_type     = TUNER_ABSENT,
2012                 .tuner_addr     = ADDR_UNSET,
2013         },
2014
2015                 /* ---- card 0x6c ---------------------------------- */
2016         [BTTV_BOARD_VD009_MINIDIN] = {
2017                 .name           = "PHYTEC VD-009 MiniDIN (bt878)",
2018                 .video_inputs   = 10,
2019                 /* .audio_inputs= 0, */
2020                 .svhs           = 9,
2021                 .gpiomask       = 0x00,
2022                 .gpiomask2      = 0x03, /* used for external vodeo mux */
2023                 .muxsel         = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 0),
2024                 .muxsel_hook    = phytec_muxsel,
2025                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2026                 .pll            = PLL_28,
2027                 .tuner_type     = TUNER_ABSENT,
2028                 .tuner_addr     = ADDR_UNSET,
2029         },
2030         [BTTV_BOARD_VD009_COMBI] = {
2031                 .name           = "PHYTEC VD-009 Combi (bt878)",
2032                 .video_inputs   = 10,
2033                 /* .audio_inputs= 0, */
2034                 .svhs           = 9,
2035                 .gpiomask       = 0x00,
2036                 .gpiomask2      = 0x03, /* used for external vodeo mux */
2037                 .muxsel         = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1),
2038                 .muxsel_hook    = phytec_muxsel,
2039                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2040                 .pll            = PLL_28,
2041                 .tuner_type     = TUNER_ABSENT,
2042                 .tuner_addr     = ADDR_UNSET,
2043         },
2044         [BTTV_BOARD_IVC100] = {
2045                 .name           = "IVC-100",
2046                 .video_inputs   = 4,
2047                 /* .audio_inputs= 0, */
2048                 .tuner_type     = TUNER_ABSENT,
2049                 .tuner_addr     = ADDR_UNSET,
2050                 .svhs           = NO_SVHS,
2051                 .gpiomask       = 0xdf,
2052                 .muxsel         = MUXSEL(2, 3, 1, 0),
2053                 .pll            = PLL_28,
2054         },
2055         [BTTV_BOARD_IVC120] = {
2056                 /* IVC-120G - Alan Garfield <alan@fromorbit.com> */
2057                 .name           = "IVC-120G",
2058                 .video_inputs   = 16,
2059                 /* .audio_inputs= 0, */
2060                 .tuner_type     = TUNER_ABSENT,
2061                 .tuner_addr     = ADDR_UNSET,
2062                 .svhs           = NO_SVHS,   /* card has no svhs */
2063                 .no_msp34xx     = 1,
2064                 .no_tda7432     = 1,
2065                 .gpiomask       = 0x00,
2066                 .muxsel         = MUXSEL(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0),
2067                 .muxsel_hook    = ivc120_muxsel,
2068                 .pll            = PLL_28,
2069         },
2070
2071                 /* ---- card 0x70 ---------------------------------- */
2072         [BTTV_BOARD_PC_HDTV] = {
2073                 .name           = "pcHDTV HD-2000 TV",
2074                 .video_inputs   = 4,
2075                 /* .audio_inputs= 1, */
2076                 .svhs           = 2,
2077                 .muxsel         = MUXSEL(2, 3, 1, 0),
2078                 .tuner_type     = TUNER_PHILIPS_FCV1236D,
2079                 .tuner_addr     = ADDR_UNSET,
2080                 .has_dvb        = 1,
2081         },
2082         [BTTV_BOARD_TWINHAN_DST] = {
2083                 .name           = "Twinhan DST + clones",
2084                 .no_msp34xx     = 1,
2085                 .no_tda7432     = 1,
2086                 .tuner_type     = TUNER_ABSENT,
2087                 .tuner_addr     = ADDR_UNSET,
2088                 .no_video       = 1,
2089                 .has_dvb        = 1,
2090         },
2091         [BTTV_BOARD_WINFASTVC100] = {
2092                 .name           = "Winfast VC100",
2093                 .video_inputs   = 3,
2094                 /* .audio_inputs= 0, */
2095                 .svhs           = 1,
2096                 /* Vid In, SVid In, Vid over SVid in connector */
2097                 .muxsel         = MUXSEL(3, 1, 1, 3),
2098                 .no_msp34xx     = 1,
2099                 .no_tda7432     = 1,
2100                 .tuner_type     = TUNER_ABSENT,
2101                 .tuner_addr     = ADDR_UNSET,
2102                 .pll            = PLL_28,
2103         },
2104         [BTTV_BOARD_TEV560] = {
2105                 .name           = "Teppro TEV-560/InterVision IV-560",
2106                 .video_inputs   = 3,
2107                 /* .audio_inputs= 1, */
2108                 .svhs           = 2,
2109                 .gpiomask       = 3,
2110                 .muxsel         = MUXSEL(2, 3, 1, 1),
2111                 .gpiomux        = { 1, 1, 1, 1 },
2112                 .tuner_type     = TUNER_PHILIPS_PAL,
2113                 .tuner_addr     = ADDR_UNSET,
2114                 .pll            = PLL_35,
2115         },
2116
2117                 /* ---- card 0x74 ---------------------------------- */
2118         [BTTV_BOARD_SIMUS_GVC1100] = {
2119                 .name           = "SIMUS GVC1100",
2120                 .video_inputs   = 4,
2121                 /* .audio_inputs= 0, */
2122                 .svhs           = NO_SVHS,
2123                 .tuner_type     = TUNER_ABSENT,
2124                 .tuner_addr     = ADDR_UNSET,
2125                 .pll            = PLL_28,
2126                 .muxsel         = MUXSEL(2, 2, 2, 2),
2127                 .gpiomask       = 0x3F,
2128                 .muxsel_hook    = gvc1100_muxsel,
2129         },
2130         [BTTV_BOARD_NGSTV_PLUS] = {
2131                 /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */
2132                 .name           = "NGS NGSTV+",
2133                 .video_inputs   = 3,
2134                 .svhs           = 2,
2135                 .gpiomask       = 0x008007,
2136                 .muxsel         = MUXSEL(2, 3, 0, 0),
2137                 .gpiomux        = { 0, 0, 0, 0 },
2138                 .gpiomute       = 0x000003,
2139                 .pll            = PLL_28,
2140                 .tuner_type     = TUNER_PHILIPS_PAL,
2141                 .tuner_addr     = ADDR_UNSET,
2142                 .has_remote     = 1,
2143         },
2144         [BTTV_BOARD_LMLBT4] = {
2145                 /* http://linuxmedialabs.com */
2146                 .name           = "LMLBT4",
2147                 .video_inputs   = 4, /* IN1,IN2,IN3,IN4 */
2148                 /* .audio_inputs= 0, */
2149                 .svhs           = NO_SVHS,
2150                 .muxsel         = MUXSEL(2, 3, 1, 0),
2151                 .no_msp34xx     = 1,
2152                 .no_tda7432     = 1,
2153                 .tuner_type     = TUNER_ABSENT,
2154                 .tuner_addr     = ADDR_UNSET,
2155         },
2156         [BTTV_BOARD_TEKRAM_M205] = {
2157                 /* Helmroos Harri <harri.helmroos@pp.inet.fi> */
2158                 .name           = "Tekram M205 PRO",
2159                 .video_inputs   = 3,
2160                 /* .audio_inputs= 1, */
2161                 .tuner_type     = TUNER_PHILIPS_PAL,
2162                 .tuner_addr     = ADDR_UNSET,
2163                 .svhs           = 2,
2164                 .gpiomask       = 0x68,
2165                 .muxsel         = MUXSEL(2, 3, 1),
2166                 .gpiomux        = { 0x68, 0x68, 0x61, 0x61 },
2167                 .pll            = PLL_28,
2168         },
2169
2170                 /* ---- card 0x78 ---------------------------------- */
2171         [BTTV_BOARD_CONTVFMI] = {
2172                 /* Javier Cendan Ares <jcendan@lycos.es> */
2173                 /* bt878 TV + FM without subsystem ID */
2174                 .name           = "Conceptronic CONTVFMi",
2175                 .video_inputs   = 3,
2176                 /* .audio_inputs= 1, */
2177                 .svhs           = 2,
2178                 .gpiomask       = 0x008007,
2179                 .muxsel         = MUXSEL(2, 3, 1, 1),
2180                 .gpiomux        = { 0, 1, 2, 2 },
2181                 .gpiomute       = 3,
2182                 .pll            = PLL_28,
2183                 .tuner_type     = TUNER_PHILIPS_PAL,
2184                 .tuner_addr     = ADDR_UNSET,
2185                 .has_remote     = 1,
2186                 .has_radio      = 1,
2187         },
2188         [BTTV_BOARD_PICOLO_TETRA_CHIP] = {
2189                 /*Eric DEBIEF <debief@telemsa.com>*/
2190                 /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controlled*/
2191                 /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the following declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/
2192                 /*0x79 in bttv.h*/
2193                 .name           = "Euresys Picolo Tetra",
2194                 .video_inputs   = 4,
2195                 /* .audio_inputs= 0, */
2196                 .svhs           = NO_SVHS,
2197                 .gpiomask       = 0,
2198                 .gpiomask2      = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/
2199                 .no_msp34xx     = 1,
2200                 .no_tda7432     = 1,
2201                 /*878A input is always MUX0, see above.*/
2202                 .muxsel         = MUXSEL(2, 2, 2, 2),
2203                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2204                 .pll            = PLL_28,
2205                 .muxsel_hook    = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/
2206                 .tuner_type     = TUNER_ABSENT,
2207                 .tuner_addr     = ADDR_UNSET,
2208         },
2209         [BTTV_BOARD_SPIRIT_TV] = {
2210                 /* Spirit TV Tuner from http://spiritmodems.com.au */
2211                 /* Stafford Goodsell <surge@goliath.homeunix.org> */
2212                 .name           = "Spirit TV Tuner",
2213                 .video_inputs   = 3,
2214                 /* .audio_inputs= 1, */
2215                 .svhs           = 2,
2216                 .gpiomask       = 0x0000000f,
2217                 .muxsel         = MUXSEL(2, 1, 1),
2218                 .gpiomux        = { 0x02, 0x00, 0x00, 0x00 },
2219                 .tuner_type     = TUNER_TEMIC_PAL,
2220                 .tuner_addr     = ADDR_UNSET,
2221                 .no_msp34xx     = 1,
2222         },
2223         [BTTV_BOARD_AVDVBT_771] = {
2224                 /* Wolfram Joost <wojo@frokaschwei.de> */
2225                 .name           = "AVerMedia AVerTV DVB-T 771",
2226                 .video_inputs   = 2,
2227                 .svhs           = 1,
2228                 .tuner_type     = TUNER_ABSENT,
2229                 .tuner_addr     = ADDR_UNSET,
2230                 .muxsel         = MUXSEL(3, 3),
2231                 .no_msp34xx     = 1,
2232                 .no_tda7432     = 1,
2233                 .pll            = PLL_28,
2234                 .has_dvb        = 1,
2235                 .no_gpioirq     = 1,
2236                 .has_remote     = 1,
2237         },
2238                 /* ---- card 0x7c ---------------------------------- */
2239         [BTTV_BOARD_AVDVBT_761] = {
2240                 /* Matt Jesson <dvb@jesson.eclipse.co.uk> */
2241                 /* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */
2242                 .name           = "AverMedia AverTV DVB-T 761",
2243                 .video_inputs   = 2,
2244                 .svhs           = 1,
2245                 .muxsel         = MUXSEL(3, 1, 2, 0), /* Comp0, S-Video, ?, ? */
2246                 .no_msp34xx     = 1,
2247                 .no_tda7432     = 1,
2248                 .pll            = PLL_28,
2249                 .tuner_type     = TUNER_ABSENT,
2250                 .tuner_addr     = ADDR_UNSET,
2251                 .has_dvb        = 1,
2252                 .no_gpioirq     = 1,
2253                 .has_remote     = 1,
2254         },
2255         [BTTV_BOARD_MATRIX_VISIONSQ] = {
2256                 /* andre.schwarz@matrix-vision.de */
2257                 .name           = "MATRIX Vision Sigma-SQ",
2258                 .video_inputs   = 16,
2259                 /* .audio_inputs= 0, */
2260                 .svhs           = NO_SVHS,
2261                 .gpiomask       = 0x0,
2262                 .muxsel         = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3),
2263                 .muxsel_hook    = sigmaSQ_muxsel,
2264                 .gpiomux        = { 0 },
2265                 .no_msp34xx     = 1,
2266                 .pll            = PLL_28,
2267                 .tuner_type     = TUNER_ABSENT,
2268                 .tuner_addr     = ADDR_UNSET,
2269         },
2270         [BTTV_BOARD_MATRIX_VISIONSLC] = {
2271                 /* andre.schwarz@matrix-vision.de */
2272                 .name           = "MATRIX Vision Sigma-SLC",
2273                 .video_inputs   = 4,
2274                 /* .audio_inputs= 0, */
2275                 .svhs           = NO_SVHS,
2276                 .gpiomask       = 0x0,
2277                 .muxsel         = MUXSEL(2, 2, 2, 2),
2278                 .muxsel_hook    = sigmaSLC_muxsel,
2279                 .gpiomux        = { 0 },
2280                 .no_msp34xx     = 1,
2281                 .pll            = PLL_28,
2282                 .tuner_type     = TUNER_ABSENT,
2283                 .tuner_addr     = ADDR_UNSET,
2284         },
2285                 /* BTTV_BOARD_APAC_VIEWCOMP */
2286         [BTTV_BOARD_APAC_VIEWCOMP] = {
2287                 /* Attila Kondoros <attila.kondoros@chello.hu> */
2288                 /* bt878 TV + FM 0x00000000 subsystem ID */
2289                 .name           = "APAC Viewcomp 878(AMAX)",
2290                 .video_inputs   = 2,
2291                 /* .audio_inputs= 1, */
2292                 .svhs           = NO_SVHS,
2293                 .gpiomask       = 0xFF,
2294                 .muxsel         = MUXSEL(2, 3, 1, 1),
2295                 .gpiomux        = { 2, 0, 0, 0 },
2296                 .gpiomute       = 10,
2297                 .pll            = PLL_28,
2298                 .tuner_type     = TUNER_PHILIPS_PAL,
2299                 .tuner_addr     = ADDR_UNSET,
2300                 .has_remote     = 1,   /* miniremote works, see ir-kbd-gpio.c */
2301                 .has_radio      = 1,   /* not every card has radio */
2302         },
2303
2304                 /* ---- card 0x80 ---------------------------------- */
2305         [BTTV_BOARD_DVICO_DVBT_LITE] = {
2306                 /* Chris Pascoe <c.pascoe@itee.uq.edu.au> */
2307                 .name           = "DViCO FusionHDTV DVB-T Lite",
2308                 .no_msp34xx     = 1,
2309                 .no_tda7432     = 1,
2310                 .pll            = PLL_28,
2311                 .no_video       = 1,
2312                 .has_dvb        = 1,
2313                 .tuner_type     = TUNER_ABSENT,
2314                 .tuner_addr     = ADDR_UNSET,
2315         },
2316         [BTTV_BOARD_VGEAR_MYVCD] = {
2317                 /* Steven <photon38@pchome.com.tw> */
2318                 .name           = "V-Gear MyVCD",
2319                 .video_inputs   = 3,
2320                 /* .audio_inputs= 1, */
2321                 .svhs           = 2,
2322                 .gpiomask       = 0x3f,
2323                 .muxsel         = MUXSEL(2, 3, 1, 0),
2324                 .gpiomux        = {0x31, 0x31, 0x31, 0x31 },
2325                 .gpiomute       = 0x31,
2326                 .no_msp34xx     = 1,
2327                 .pll            = PLL_28,
2328                 .tuner_type     = TUNER_PHILIPS_NTSC_M,
2329                 .tuner_addr     = ADDR_UNSET,
2330                 .has_radio      = 0,
2331         },
2332         [BTTV_BOARD_SUPER_TV] = {
2333                 /* Rick C <cryptdragoon@gmail.com> */
2334                 .name           = "Super TV Tuner",
2335                 .video_inputs   = 4,
2336                 /* .audio_inputs= 1, */
2337                 .svhs           = 2,
2338                 .muxsel         = MUXSEL(2, 3, 1, 0),
2339                 .tuner_type     = TUNER_PHILIPS_NTSC,
2340                 .tuner_addr     = ADDR_UNSET,
2341                 .gpiomask       = 0x008007,
2342                 .gpiomux        = { 0, 0x000001,0,0 },
2343                 .has_radio      = 1,
2344         },
2345         [BTTV_BOARD_TIBET_CS16] = {
2346                 /* Chris Fanning <video4linux@haydon.net> */
2347                 .name           = "Tibet Systems 'Progress DVR' CS16",
2348                 .video_inputs   = 16,
2349                 /* .audio_inputs= 0, */
2350                 .svhs           = NO_SVHS,
2351                 .muxsel         = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2352                 .pll            = PLL_28,
2353                 .no_msp34xx     = 1,
2354                 .no_tda7432     = 1,
2355                 .tuner_type     = TUNER_ABSENT,
2356                 .tuner_addr     = ADDR_UNSET,
2357                 .muxsel_hook    = tibetCS16_muxsel,
2358         },
2359         [BTTV_BOARD_KODICOM_4400R] = {
2360                 /* Bill Brack <wbrack@mmm.com.hk> */
2361                 /*
2362                 * Note that, because of the card's wiring, the "master"
2363                 * BT878A chip (i.e. the one which controls the analog switch
2364                 * and must use this card type) is the 2nd one detected.  The
2365                 * other 3 chips should use card type 0x85, whose description
2366                 * follows this one.  There is a EEPROM on the card (which is
2367                 * connected to the I2C of one of those other chips), but is
2368                 * not currently handled.  There is also a facility for a
2369                 * "monitor", which is also not currently implemented.
2370                 */
2371                 .name           = "Kodicom 4400R (master)",
2372                 .video_inputs   = 16,
2373                 /* .audio_inputs= 0, */
2374                 .tuner_type     = TUNER_ABSENT,
2375                 .tuner_addr     = ADDR_UNSET,
2376                 .svhs           = NO_SVHS,
2377                 /* GPIO bits 0-9 used for analog switch:
2378                 *   00 - 03:    camera selector
2379                 *   04 - 06:    channel (controller) selector
2380                 *   07: data (1->on, 0->off)
2381                 *   08: strobe
2382                 *   09: reset
2383                 * bit 16 is input from sync separator for the channel
2384                 */
2385                 .gpiomask       = 0x0003ff,
2386                 .no_gpioirq     = 1,
2387                 .muxsel         = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
2388                 .pll            = PLL_28,
2389                 .no_msp34xx     = 1,
2390                 .no_tda7432     = 1,
2391                 .muxsel_hook    = kodicom4400r_muxsel,
2392         },
2393         [BTTV_BOARD_KODICOM_4400R_SL] = {
2394                 /* Bill Brack <wbrack@mmm.com.hk> */
2395                 /* Note that, for reasons unknown, the "master" BT878A chip (i.e. the
2396                 * one which controls the analog switch, and must use the card type)
2397                 * is the 2nd one detected.  The other 3 chips should use this card
2398                 * type
2399                 */
2400                 .name           = "Kodicom 4400R (slave)",
2401                 .video_inputs   = 16,
2402                 /* .audio_inputs= 0, */
2403                 .tuner_type     = TUNER_ABSENT,
2404                 .tuner_addr     = ADDR_UNSET,
2405                 .svhs           = NO_SVHS,
2406                 .gpiomask       = 0x010000,
2407                 .no_gpioirq     = 1,
2408                 .muxsel         = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
2409                 .pll            = PLL_28,
2410                 .no_msp34xx     = 1,
2411                 .no_tda7432     = 1,
2412                 .muxsel_hook    = kodicom4400r_muxsel,
2413         },
2414                 /* ---- card 0x86---------------------------------- */
2415         [BTTV_BOARD_ADLINK_RTV24] = {
2416                 /* Michael Henson <mhenson@clarityvi.com> */
2417                 /* Adlink RTV24 with special unlock codes */
2418                 .name           = "Adlink RTV24",
2419                 .video_inputs   = 4,
2420                 /* .audio_inputs= 1, */
2421                 .svhs           = 2,
2422                 .muxsel         = MUXSEL(2, 3, 1, 0),
2423                 .tuner_type     = UNSET,
2424                 .tuner_addr     = ADDR_UNSET,
2425                 .pll            = PLL_28,
2426         },
2427                 /* ---- card 0x87---------------------------------- */
2428         [BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE] = {
2429                 /* Michael Krufky <mkrufky@m1k.net> */
2430                 .name           = "DViCO FusionHDTV 5 Lite",
2431                 .tuner_type     = TUNER_LG_TDVS_H06XF, /* TDVS-H064F */
2432                 .tuner_addr     = ADDR_UNSET,
2433                 .video_inputs   = 3,
2434                 /* .audio_inputs= 1, */
2435                 .svhs           = 2,
2436                 .muxsel         = MUXSEL(2, 3, 1),
2437                 .gpiomask       = 0x00e00007,
2438                 .gpiomux        = { 0x00400005, 0, 0x00000001, 0 },
2439                 .gpiomute       = 0x00c00007,
2440                 .no_msp34xx     = 1,
2441                 .no_tda7432     = 1,
2442                 .has_dvb        = 1,
2443         },
2444                 /* ---- card 0x88---------------------------------- */
2445         [BTTV_BOARD_ACORP_Y878F] = {
2446                 /* Mauro Carvalho Chehab <mchehab@infradead.org> */
2447                 .name           = "Acorp Y878F",
2448                 .video_inputs   = 3,
2449                 /* .audio_inputs= 1, */
2450                 .svhs           = 2,
2451                 .gpiomask       = 0x01fe00,
2452                 .muxsel         = MUXSEL(2, 3, 1, 1),
2453                 .gpiomux        = { 0x001e00, 0, 0x018000, 0x014000 },
2454                 .gpiomute       = 0x002000,
2455                 .pll            = PLL_28,
2456                 .tuner_type     = TUNER_YMEC_TVF66T5_B_DFF,
2457                 .tuner_addr     = 0xc1 >>1,
2458                 .has_radio      = 1,
2459         },
2460                 /* ---- card 0x89 ---------------------------------- */
2461         [BTTV_BOARD_CONCEPTRONIC_CTVFMI2] = {
2462                 .name           = "Conceptronic CTVFMi v2",
2463                 .video_inputs   = 3,
2464                 /* .audio_inputs= 1, */
2465                 .svhs           = 2,
2466                 .gpiomask       = 0x001c0007,
2467                 .muxsel         = MUXSEL(2, 3, 1, 1),
2468                 .gpiomux        = { 0, 1, 2, 2 },
2469                 .gpiomute       = 3,
2470                 .pll            = PLL_28,
2471                 .tuner_type     = TUNER_TENA_9533_DI,
2472                 .tuner_addr     = ADDR_UNSET,
2473                 .has_remote     = 1,
2474                 .has_radio      = 1,
2475         },
2476                 /* ---- card 0x8a ---------------------------------- */
2477         [BTTV_BOARD_PV_BT878P_2E] = {
2478                 .name           = "Prolink Pixelview PV-BT878P+ (Rev.2E)",
2479                 .video_inputs   = 5,
2480                 /* .audio_inputs= 1, */
2481                 .svhs           = 3,
2482                 .has_dig_in     = 1,
2483                 .gpiomask       = 0x01fe00,
2484                 .muxsel         = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */
2485                 /* .digital_mode= DIGITAL_MODE_CAMERA, */
2486                 .gpiomux        = { 0x00400, 0x10400, 0x04400, 0x80000 },
2487                 .gpiomute       = 0x12400,
2488                 .no_msp34xx     = 1,
2489                 .pll            = PLL_28,
2490                 .tuner_type     = TUNER_LG_PAL_FM,
2491                 .tuner_addr     = ADDR_UNSET,
2492                 .has_remote     = 1,
2493         },
2494                 /* ---- card 0x8b ---------------------------------- */
2495         [BTTV_BOARD_PV_M4900] = {
2496                 /* Sérgio Fortier <sergiofortier@yahoo.com.br> */
2497                 .name           = "Prolink PixelView PlayTV MPEG2 PV-M4900",
2498                 .video_inputs   = 3,
2499                 /* .audio_inputs= 1, */
2500                 .svhs           = 2,
2501                 .gpiomask       = 0x3f,
2502                 .muxsel         = MUXSEL(2, 3, 1, 1),
2503                 .gpiomux        = { 0x21, 0x20, 0x24, 0x2c },
2504                 .gpiomute       = 0x29,
2505                 .no_msp34xx     = 1,
2506                 .pll            = PLL_28,
2507                 .tuner_type     = TUNER_YMEC_TVF_5533MF,
2508                 .tuner_addr     = ADDR_UNSET,
2509                 .has_radio      = 1,
2510                 .has_remote     = 1,
2511         },
2512                 /* ---- card 0x8c ---------------------------------- */
2513         /* Has four Bt878 chips behind a PCI bridge, each chip has:
2514              one external BNC composite input (mux 2)
2515              three internal composite inputs (unknown muxes)
2516              an 18-bit stereo A/D (CS5331A), which has:
2517                one external stereo unblanced (RCA) audio connection
2518                one (or 3?) internal stereo balanced (XLR) audio connection
2519                input is selected via gpio to a 14052B mux
2520                  (mask=0x300, unbal=0x000, bal=0x100, ??=0x200,0x300)
2521                gain is controlled via an X9221A chip on the I2C bus @0x28
2522                sample rate is controlled via gpio to an MK1413S
2523                  (mask=0x3, 32kHz=0x0, 44.1kHz=0x1, 48kHz=0x2, ??=0x3)
2524              There is neither a tuner nor an svideo input. */
2525         [BTTV_BOARD_OSPREY440]  = {
2526                 .name           = "Osprey 440",
2527                 .video_inputs   = 4,
2528                 /* .audio_inputs= 2, */
2529                 .svhs           = NO_SVHS,
2530                 .muxsel         = MUXSEL(2, 3, 0, 1), /* 3,0,1 are guesses */
2531                 .gpiomask       = 0x303,
2532                 .gpiomute       = 0x000, /* int + 32kHz */
2533                 .gpiomux        = { 0, 0, 0x000, 0x100},
2534                 .pll            = PLL_28,
2535                 .tuner_type     = TUNER_ABSENT,
2536                 .tuner_addr     = ADDR_UNSET,
2537                 .no_msp34xx     = 1,
2538                 .no_tda7432     = 1,
2539         },
2540                 /* ---- card 0x8d ---------------------------------- */
2541         [BTTV_BOARD_ASOUND_SKYEYE] = {
2542                 .name           = "Asound Skyeye PCTV",
2543                 .video_inputs   = 3,
2544                 /* .audio_inputs= 1, */
2545                 .svhs           = 2,
2546                 .gpiomask       = 15,
2547                 .muxsel         = MUXSEL(2, 3, 1, 1),
2548                 .gpiomux        = { 2, 0, 0, 0 },
2549                 .gpiomute       = 1,
2550                 .pll            = PLL_28,
2551                 .tuner_type     = TUNER_PHILIPS_NTSC,
2552                 .tuner_addr     = ADDR_UNSET,
2553         },
2554                 /* ---- card 0x8e ---------------------------------- */
2555         [BTTV_BOARD_SABRENT_TVFM] = {
2556                 .name           = "Sabrent TV-FM (bttv version)",
2557                 .video_inputs   = 3,
2558                 /* .audio_inputs= 1, */
2559                 .svhs           = 2,
2560                 .gpiomask       = 0x108007,
2561                 .muxsel         = MUXSEL(2, 3, 1, 1),
2562                 .gpiomux        = { 100000, 100002, 100002, 100000 },
2563                 .no_msp34xx     = 1,
2564                 .no_tda7432     = 1,
2565                 .pll            = PLL_28,
2566                 .tuner_type     = TUNER_TNF_5335MF,
2567                 .tuner_addr     = ADDR_UNSET,
2568                 .has_radio      = 1,
2569         },
2570         /* ---- card 0x8f ---------------------------------- */
2571         [BTTV_BOARD_HAUPPAUGE_IMPACTVCB] = {
2572                 .name           = "Hauppauge ImpactVCB (bt878)",
2573                 .video_inputs   = 4,
2574                 /* .audio_inputs= 0, */
2575                 .svhs           = NO_SVHS,
2576                 .gpiomask       = 0x0f, /* old: 7 */
2577                 .muxsel         = MUXSEL(0, 1, 3, 2), /* Composite 0-3 */
2578                 .no_msp34xx     = 1,
2579                 .no_tda7432     = 1,
2580                 .tuner_type     = TUNER_ABSENT,
2581                 .tuner_addr     = ADDR_UNSET,
2582         },
2583         [BTTV_BOARD_MACHTV_MAGICTV] = {
2584                 /* Julian Calaby <julian.calaby@gmail.com>
2585                  * Slightly different from original MachTV definition (0x60)
2586
2587                  * FIXME: RegSpy says gpiomask should be "0x001c800f", but it
2588                  * stuffs up remote chip. Bug is a pin on the jaecs is not set
2589                  * properly (methinks) causing no keyup bits being set */
2590
2591                 .name           = "MagicTV", /* rebranded MachTV */
2592                 .video_inputs   = 3,
2593                 /* .audio_inputs= 1, */
2594                 .svhs           = 2,
2595                 .gpiomask       = 7,
2596                 .muxsel         = MUXSEL(2, 3, 1, 1),
2597                 .gpiomux        = { 0, 1, 2, 3 },
2598                 .gpiomute       = 4,
2599                 .tuner_type     = TUNER_TEMIC_4009FR5_PAL,
2600                 .tuner_addr     = ADDR_UNSET,
2601                 .pll            = PLL_28,
2602                 .has_radio      = 1,
2603                 .has_remote     = 1,
2604         },
2605         [BTTV_BOARD_SSAI_SECURITY] = {
2606                 .name           = "SSAI Security Video Interface",
2607                 .video_inputs   = 4,
2608                 /* .audio_inputs= 0, */
2609                 .svhs           = NO_SVHS,
2610                 .muxsel         = MUXSEL(0, 1, 2, 3),
2611                 .tuner_type     = TUNER_ABSENT,
2612                 .tuner_addr     = ADDR_UNSET,
2613         },
2614         [BTTV_BOARD_SSAI_ULTRASOUND] = {
2615                 .name           = "SSAI Ultrasound Video Interface",
2616                 .video_inputs   = 2,
2617                 /* .audio_inputs= 0, */
2618                 .svhs           = 1,
2619                 .muxsel         = MUXSEL(2, 0, 1, 3),
2620                 .tuner_type     = TUNER_ABSENT,
2621                 .tuner_addr     = ADDR_UNSET,
2622         },
2623         /* ---- card 0x94---------------------------------- */
2624         [BTTV_BOARD_DVICO_FUSIONHDTV_2] = {
2625                 .name           = "DViCO FusionHDTV 2",
2626                 .tuner_type     = TUNER_PHILIPS_FCV1236D,
2627                 .tuner_addr     = ADDR_UNSET,
2628                 .video_inputs   = 3,
2629                 /* .audio_inputs= 1, */
2630                 .svhs           = 2,
2631                 .muxsel         = MUXSEL(2, 3, 1),
2632                 .gpiomask       = 0x00e00007,
2633                 .gpiomux        = { 0x00400005, 0, 0x00000001, 0 },
2634                 .gpiomute       = 0x00c00007,
2635                 .no_msp34xx     = 1,
2636                 .no_tda7432     = 1,
2637         },
2638         /* ---- card 0x95---------------------------------- */
2639         [BTTV_BOARD_TYPHOON_TVTUNERPCI] = {
2640                 .name           = "Typhoon TV-Tuner PCI (50684)",
2641                 .video_inputs   = 3,
2642                 /* .audio_inputs= 1, */
2643                 .svhs           = 2,
2644                 .gpiomask       = 0x3014f,
2645                 .muxsel         = MUXSEL(2, 3, 1, 1),
2646                 .gpiomux        = { 0x20001,0x10001, 0, 0 },
2647                 .gpiomute       = 10,
2648                 .pll            = PLL_28,
2649                 .tuner_type     = TUNER_PHILIPS_PAL_I,
2650                 .tuner_addr     = ADDR_UNSET,
2651         },
2652         [BTTV_BOARD_GEOVISION_GV600] = {
2653                 /* emhn@usb.ve */
2654                 .name           = "Geovision GV-600",
2655                 .video_inputs   = 16,
2656                 /* .audio_inputs= 0, */
2657                 .svhs           = NO_SVHS,
2658                 .gpiomask       = 0x0,
2659                 .muxsel         = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2660                 .muxsel_hook    = geovision_muxsel,
2661                 .gpiomux        = { 0 },
2662                 .no_msp34xx     = 1,
2663                 .pll            = PLL_28,
2664                 .tuner_type     = TUNER_ABSENT,
2665                 .tuner_addr     = ADDR_UNSET,
2666         },
2667         [BTTV_BOARD_KOZUMI_KTV_01C] = {
2668                 /* Mauro Lacy <mauro@lacy.com.ar>
2669                  * Based on MagicTV and Conceptronic CONTVFMi */
2670
2671                 .name           = "Kozumi KTV-01C",
2672                 .video_inputs   = 3,
2673                 /* .audio_inputs= 1, */
2674                 .svhs           = 2,
2675                 .gpiomask       = 0x008007,
2676                 .muxsel         = MUXSEL(2, 3, 1, 1),
2677                 .gpiomux        = { 0, 1, 2, 2 }, /* CONTVFMi */
2678                 .gpiomute       = 3, /* CONTVFMi */
2679                 .tuner_type     = TUNER_PHILIPS_FM1216ME_MK3, /* TCL MK3 */
2680                 .tuner_addr     = ADDR_UNSET,
2681                 .pll            = PLL_28,
2682                 .has_radio      = 1,
2683                 .has_remote     = 1,
2684         },
2685         [BTTV_BOARD_ENLTV_FM_2] = {
2686                 /* Encore TV Tuner Pro ENL TV-FM-2
2687                    Mauro Carvalho Chehab <mchehab@infradead.org */
2688                 .name           = "Encore ENL TV-FM-2",
2689                 .video_inputs   = 3,
2690                 /* .audio_inputs= 1, */
2691                 .svhs           = 2,
2692                 /* bit 6          -> IR disabled
2693                    bit 18/17 = 00 -> mute
2694                                01 -> enable external audio input
2695                                10 -> internal audio input (mono?)
2696                                11 -> internal audio input
2697                  */
2698                 .gpiomask       = 0x060040,
2699                 .muxsel         = MUXSEL(2, 3, 3),
2700                 .gpiomux        = { 0x60000, 0x60000, 0x20000, 0x20000 },
2701                 .gpiomute       = 0,
2702                 .tuner_type     = TUNER_TCL_MF02GIP_5N,
2703                 .tuner_addr     = ADDR_UNSET,
2704                 .pll            = PLL_28,
2705                 .has_radio      = 1,
2706                 .has_remote     = 1,
2707         },
2708                 [BTTV_BOARD_VD012] = {
2709                 /* D.Heer@Phytec.de */
2710                 .name           = "PHYTEC VD-012 (bt878)",
2711                 .video_inputs   = 4,
2712                 /* .audio_inputs= 0, */
2713                 .svhs           = NO_SVHS,
2714                 .gpiomask       = 0x00,
2715                 .muxsel         = MUXSEL(0, 2, 3, 1),
2716                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2717                 .pll            = PLL_28,
2718                 .tuner_type     = TUNER_ABSENT,
2719                 .tuner_addr     = ADDR_UNSET,
2720         },
2721                 [BTTV_BOARD_VD012_X1] = {
2722                 /* D.Heer@Phytec.de */
2723                 .name           = "PHYTEC VD-012-X1 (bt878)",
2724                 .video_inputs   = 4,
2725                 /* .audio_inputs= 0, */
2726                 .svhs           = 3,
2727                 .gpiomask       = 0x00,
2728                 .muxsel         = MUXSEL(2, 3, 1),
2729                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2730                 .pll            = PLL_28,
2731                 .tuner_type     = TUNER_ABSENT,
2732                 .tuner_addr     = ADDR_UNSET,
2733         },
2734                 [BTTV_BOARD_VD012_X2] = {
2735                 /* D.Heer@Phytec.de */
2736                 .name           = "PHYTEC VD-012-X2 (bt878)",
2737                 .video_inputs   = 4,
2738                 /* .audio_inputs= 0, */
2739                 .svhs           = 3,
2740                 .gpiomask       = 0x00,
2741                 .muxsel         = MUXSEL(3, 2, 1),
2742                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2743                 .pll            = PLL_28,
2744                 .tuner_type     = TUNER_ABSENT,
2745                 .tuner_addr     = ADDR_UNSET,
2746         },
2747                 [BTTV_BOARD_GEOVISION_GV800S] = {
2748                 /* Bruno Christo <bchristo@inf.ufsm.br>
2749                  *
2750                  * GeoVision GV-800(S) has 4 Conexant Fusion 878A:
2751                  *      1 audio input  per BT878A = 4 audio inputs
2752                  *      4 video inputs per BT878A = 16 video inputs
2753                  * This is the first BT878A chip of the GV-800(S). It's the
2754                  * "master" chip and it controls the video inputs through an
2755                  * analog multiplexer (a CD22M3494) via some GPIO pins. The
2756                  * slaves should use card type 0x9e (following this one).
2757                  * There is a EEPROM on the card which is currently not handled.
2758                  * The audio input is not working yet.
2759                  */
2760                 .name           = "Geovision GV-800(S) (master)",
2761                 .video_inputs   = 4,
2762                 /* .audio_inputs= 1, */
2763                 .tuner_type     = TUNER_ABSENT,
2764                 .tuner_addr     = ADDR_UNSET,
2765                 .svhs           = NO_SVHS,
2766                 .gpiomask       = 0xf107f,
2767                 .no_gpioirq     = 1,
2768                 .muxsel         = MUXSEL(2, 2, 2, 2),
2769                 .pll            = PLL_28,
2770                 .no_msp34xx     = 1,
2771                 .no_tda7432     = 1,
2772                 .muxsel_hook    = gv800s_muxsel,
2773         },
2774                 [BTTV_BOARD_GEOVISION_GV800S_SL] = {
2775                 /* Bruno Christo <bchristo@inf.ufsm.br>
2776                  *
2777                  * GeoVision GV-800(S) has 4 Conexant Fusion 878A:
2778                  *      1 audio input  per BT878A = 4 audio inputs
2779                  *      4 video inputs per BT878A = 16 video inputs
2780                  * The 3 other BT878A chips are "slave" chips of the GV-800(S)
2781                  * and should use this card type.
2782                  * The audio input is not working yet.
2783                  */
2784                 .name           = "Geovision GV-800(S) (slave)",
2785                 .video_inputs   = 4,
2786                 /* .audio_inputs= 1, */
2787                 .tuner_type     = TUNER_ABSENT,
2788                 .tuner_addr     = ADDR_UNSET,
2789                 .svhs           = NO_SVHS,
2790                 .gpiomask       = 0x00,
2791                 .no_gpioirq     = 1,
2792                 .muxsel         = MUXSEL(2, 2, 2, 2),
2793                 .pll            = PLL_28,
2794                 .no_msp34xx     = 1,
2795                 .no_tda7432     = 1,
2796                 .muxsel_hook    = gv800s_muxsel,
2797         },
2798         [BTTV_BOARD_PV183] = {
2799                 .name           = "ProVideo PV183", /* 0x9f */
2800                 .video_inputs   = 2,
2801                 /* .audio_inputs= 0, */
2802                 .svhs           = NO_SVHS,
2803                 .gpiomask       = 0,
2804                 .muxsel         = MUXSEL(2, 3),
2805                 .gpiomux        = { 0 },
2806                 .no_msp34xx     = 1,
2807                 .pll            = PLL_28,
2808                 .tuner_type     = TUNER_ABSENT,
2809                 .tuner_addr     = ADDR_UNSET,
2810         },
2811         [BTTV_BOARD_TVT_TD3116] = {
2812                 .name           = "Tongwei Video Technology TD-3116",
2813                 .video_inputs   = 16,
2814                 .gpiomask       = 0xc00ff,
2815                 .muxsel         = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2816                 .muxsel_hook    = td3116_muxsel,
2817                 .svhs           = NO_SVHS,
2818                 .pll            = PLL_28,
2819                 .tuner_type     = TUNER_ABSENT,
2820         },
2821 };
2822
2823 static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
2824
2825 /* ----------------------------------------------------------------------- */
2826
2827 static unsigned char eeprom_data[256];
2828
2829 /*
2830  * identify card
2831  */
2832 void __devinit bttv_idcard(struct bttv *btv)
2833 {
2834         unsigned int gpiobits;
2835         int i,type;
2836
2837         /* read PCI subsystem ID */
2838         btv->cardid  = btv->c.pci->subsystem_device << 16;
2839         btv->cardid |= btv->c.pci->subsystem_vendor;
2840
2841         if (0 != btv->cardid && 0xffffffff != btv->cardid) {
2842                 /* look for the card */
2843                 for (type = -1, i = 0; cards[i].id != 0; i++)
2844                         if (cards[i].id  == btv->cardid)
2845                                 type = i;
2846
2847                 if (type != -1) {
2848                         /* found it */
2849                         pr_info("%d: detected: %s [card=%d], PCI subsystem ID is %04x:%04x\n",
2850                                 btv->c.nr, cards[type].name, cards[type].cardnr,
2851                                 btv->cardid & 0xffff,
2852                                 (btv->cardid >> 16) & 0xffff);
2853                         btv->c.type = cards[type].cardnr;
2854                 } else {
2855                         /* 404 */
2856                         pr_info("%d: subsystem: %04x:%04x (UNKNOWN)\n",
2857                                 btv->c.nr, btv->cardid & 0xffff,
2858                                 (btv->cardid >> 16) & 0xffff);
2859                         pr_debug("please mail id, board name and the correct card= insmod option to linux-media@vger.kernel.org\n");
2860                 }
2861         }
2862
2863         /* let the user override the autodetected type */
2864         if (card[btv->c.nr] < bttv_num_tvcards)
2865                 btv->c.type=card[btv->c.nr];
2866
2867         /* print which card config we are using */
2868         pr_info("%d: using: %s [card=%d,%s]\n",
2869                 btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type,
2870                 card[btv->c.nr] < bttv_num_tvcards
2871                 ? "insmod option" : "autodetected");
2872
2873         /* overwrite gpio stuff ?? */
2874         if (UNSET == audioall && UNSET == audiomux[0])
2875                 return;
2876
2877         if (UNSET != audiomux[0]) {
2878                 gpiobits = 0;
2879                 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2880                         bttv_tvcards[btv->c.type].gpiomux[i] = audiomux[i];
2881                         gpiobits |= audiomux[i];
2882                 }
2883         } else {
2884                 gpiobits = audioall;
2885                 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2886                         bttv_tvcards[btv->c.type].gpiomux[i] = audioall;
2887                 }
2888         }
2889         bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits;
2890         pr_info("%d: gpio config override: mask=0x%x, mux=",
2891                 btv->c.nr, bttv_tvcards[btv->c.type].gpiomask);
2892         for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2893                 pr_cont("%s0x%x",
2894                         i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]);
2895         }
2896         pr_cont("\n");
2897 }
2898
2899 /*
2900  * (most) board specific initialisations goes here
2901  */
2902
2903 /* Some Modular Technology cards have an eeprom, but no subsystem ID */
2904 static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256])
2905 {
2906         int type = -1;
2907
2908         if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13))
2909                 type = BTTV_BOARD_MODTEC_205;
2910         else if (0 == strncmp(eeprom_data+20,"Picolo",7))
2911                 type = BTTV_BOARD_EURESYS_PICOLO;
2912         else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0)
2913                 type = BTTV_BOARD_HAUPPAUGE; /* old bt848 */
2914
2915         if (-1 != type) {
2916                 btv->c.type = type;
2917                 pr_info("%d: detected by eeprom: %s [card=%d]\n",
2918                         btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type);
2919         }
2920 }
2921
2922 static void flyvideo_gpio(struct bttv *btv)
2923 {
2924         int gpio, has_remote, has_radio, is_capture_only;
2925         int is_lr90, has_tda9820_tda9821;
2926         int tuner_type = UNSET, ttype;
2927
2928         gpio_inout(0xffffff, 0);
2929         udelay(8);  /* without this we would see the 0x1800 mask */
2930         gpio = gpio_read();
2931         /* FIXME: must restore OUR_EN ??? */
2932
2933         /* all cards provide GPIO info, some have an additional eeprom
2934          * LR50: GPIO coding can be found lower right CP1 .. CP9
2935          *       CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
2936          *       GPIO14-12: n.c.
2937          * LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
2938
2939          * lowest 3 bytes are remote control codes (no handshake needed)
2940          * xxxFFF: No remote control chip soldered
2941          * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
2942          * Note: Some bits are Audio_Mask !
2943          */
2944         ttype = (gpio & 0x0f0000) >> 16;
2945         switch (ttype) {
2946         case 0x0:
2947                 tuner_type = 2;  /* NTSC, e.g. TPI8NSR11P */
2948                 break;
2949         case 0x2:
2950                 tuner_type = 39; /* LG NTSC (newer TAPC series) TAPC-H701P */
2951                 break;
2952         case 0x4:
2953                 tuner_type = 5;  /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
2954                 break;
2955         case 0x6:
2956                 tuner_type = 37; /* LG PAL (newer TAPC series) TAPC-G702P */
2957                 break;
2958         case 0xC:
2959                 tuner_type = 3;  /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
2960                 break;
2961         default:
2962                 pr_info("%d: FlyVideo_gpio: unknown tuner type\n", btv->c.nr);
2963                 break;
2964         }
2965
2966         has_remote          =   gpio & 0x800000;
2967         has_radio           =   gpio & 0x400000;
2968         /*   unknown                   0x200000;
2969          *   unknown2                  0x100000; */
2970         is_capture_only     = !(gpio & 0x008000); /* GPIO15 */
2971         has_tda9820_tda9821 = !(gpio & 0x004000);
2972         is_lr90             = !(gpio & 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */
2973         /*
2974          * gpio & 0x001000    output bit for audio routing */
2975
2976         if (is_capture_only)
2977                 tuner_type = TUNER_ABSENT; /* No tuner present */
2978
2979         pr_info("%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
2980                 btv->c.nr, has_radio ? "yes" : "no",
2981                 has_remote ? "yes" : "no", tuner_type, gpio);
2982         pr_info("%d: FlyVideo  LR90=%s tda9821/tda9820=%s capture_only=%s\n",
2983                 btv->c.nr, is_lr90 ? "yes" : "no",
2984                 has_tda9820_tda9821 ? "yes" : "no",
2985                 is_capture_only ? "yes" : "no");
2986
2987         if (tuner_type != UNSET) /* only set if known tuner autodetected, else let insmod option through */
2988                 btv->tuner_type = tuner_type;
2989         btv->has_radio = has_radio;
2990
2991         /* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
2992          * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
2993          * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */
2994         if (has_tda9820_tda9821)
2995                 btv->audio_mode_gpio = lt9415_audio;
2996         /* todo: if(has_tda9874) btv->audio_mode_gpio = fv2000s_audio; */
2997 }
2998
2999 static int miro_tunermap[] = { 0,6,2,3,   4,5,6,0,  3,0,4,5,  5,2,16,1,
3000                                14,2,17,1, 4,1,4,3,  1,2,16,1, 4,4,4,4 };
3001 static int miro_fmtuner[]  = { 0,0,0,0,   0,0,0,0,  0,0,0,0,  0,0,0,1,
3002                                1,1,1,1,   1,1,1,0,  0,0,0,0,  0,1,0,0 };
3003
3004 static void miro_pinnacle_gpio(struct bttv *btv)
3005 {
3006         int id,msp,gpio;
3007         char *info;
3008
3009         gpio_inout(0xffffff, 0);
3010         gpio = gpio_read();
3011         id   = ((gpio>>10) & 63) -1;
3012         msp  = bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx");
3013         if (id < 32) {
3014                 btv->tuner_type = miro_tunermap[id];
3015                 if (0 == (gpio & 0x20)) {
3016                         btv->has_radio = 1;
3017                         if (!miro_fmtuner[id]) {
3018                                 btv->has_matchbox = 1;
3019                                 btv->mbox_we    = (1<<6);
3020                                 btv->mbox_most  = (1<<7);
3021                                 btv->mbox_clk   = (1<<8);
3022                                 btv->mbox_data  = (1<<9);
3023                                 btv->mbox_mask  = (1<<6)|(1<<7)|(1<<8)|(1<<9);
3024                         }
3025                 } else {
3026                         btv->has_radio = 0;
3027                 }
3028                 if (-1 != msp) {
3029                         if (btv->c.type == BTTV_BOARD_MIRO)
3030                                 btv->c.type = BTTV_BOARD_MIROPRO;
3031                         if (btv->c.type == BTTV_BOARD_PINNACLE)
3032                                 btv->c.type = BTTV_BOARD_PINNACLEPRO;
3033                 }
3034                 pr_info("%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
3035                         btv->c.nr, id+1, btv->tuner_type,
3036                         !btv->has_radio ? "no" :
3037                         (btv->has_matchbox ? "matchbox" : "fmtuner"),
3038                         (-1 == msp) ? "no" : "yes");
3039         } else {
3040                 /* new cards with microtune tuner */
3041                 id = 63 - id;
3042                 btv->has_radio = 0;
3043                 switch (id) {
3044                 case 1:
3045                         info = "PAL / mono";
3046                         btv->tda9887_conf = TDA9887_INTERCARRIER;
3047                         break;
3048                 case 2:
3049                         info = "PAL+SECAM / stereo";
3050                         btv->has_radio = 1;
3051                         btv->tda9887_conf = TDA9887_QSS;
3052                         break;
3053                 case 3:
3054                         info = "NTSC / stereo";
3055                         btv->has_radio = 1;
3056                         btv->tda9887_conf = TDA9887_QSS;
3057                         break;
3058                 case 4:
3059                         info = "PAL+SECAM / mono";
3060                         btv->tda9887_conf = TDA9887_QSS;
3061                         break;
3062                 case 5:
3063                         info = "NTSC / mono";
3064                         btv->tda9887_conf = TDA9887_INTERCARRIER;
3065                         break;
3066                 case 6:
3067                         info = "NTSC / stereo";
3068                         btv->tda9887_conf = TDA9887_INTERCARRIER;
3069                         break;
3070                 case 7:
3071                         info = "PAL / stereo";
3072                         btv->tda9887_conf = TDA9887_INTERCARRIER;
3073                         break;
3074                 default:
3075                         info = "oops: unknown card";
3076                         break;
3077                 }
3078                 if (-1 != msp)
3079                         btv->c.type = BTTV_BOARD_PINNACLEPRO;
3080                 pr_info("%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
3081                         btv->c.nr, id, info, btv->has_radio ? "yes" : "no");
3082                 btv->tuner_type = TUNER_MT2032;
3083         }
3084 }
3085
3086 /* GPIO21   L: Buffer aktiv, H: Buffer inaktiv */
3087 #define LM1882_SYNC_DRIVE     0x200000L
3088
3089 static void init_ids_eagle(struct bttv *btv)
3090 {
3091         gpio_inout(0xffffff,0xFFFF37);
3092         gpio_write(0x200020);
3093
3094         /* flash strobe inverter ?! */
3095         gpio_write(0x200024);
3096
3097         /* switch sync drive off */
3098         gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3099
3100         /* set BT848 muxel to 2 */
3101         btaor((2)<<5, ~(2<<5), BT848_IFORM);
3102 }
3103
3104 /* Muxsel helper for the IDS Eagle.
3105  * the eagles does not use the standard muxsel-bits but
3106  * has its own multiplexer */
3107 static void eagle_muxsel(struct bttv *btv, unsigned int input)
3108 {
3109         gpio_bits(3, input & 3);
3110
3111         /* composite */
3112         /* set chroma ADC to sleep */
3113         btor(BT848_ADC_C_SLEEP, BT848_ADC);
3114         /* set to composite video */
3115         btand(~BT848_CONTROL_COMP, BT848_E_CONTROL);
3116         btand(~BT848_CONTROL_COMP, BT848_O_CONTROL);
3117
3118         /* switch sync drive off */
3119         gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3120 }
3121
3122 static void gvc1100_muxsel(struct bttv *btv, unsigned int input)
3123 {
3124         static const int masks[] = {0x30, 0x01, 0x12, 0x23};
3125         gpio_write(masks[input%4]);
3126 }
3127
3128 /* LMLBT4x initialization - to allow access to GPIO bits for sensors input and
3129    alarms output
3130
3131    GPIObit    | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
3132    assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1|   |   |
3133
3134    IN - sensor inputs, INx - sensor inputs and TI XORed together
3135    O1,O2,O3 - alarm outputs (relays)
3136
3137    OUT ENABLE   1    1   0  . 1  1   0   0 . 0   0   0    0   = 0x6C0
3138
3139 */
3140
3141 static void init_lmlbt4x(struct bttv *btv)
3142 {
3143         pr_debug("LMLBT4x init\n");
3144         btwrite(0x000000, BT848_GPIO_REG_INP);
3145         gpio_inout(0xffffff, 0x0006C0);
3146         gpio_write(0x000000);
3147 }
3148
3149 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input)
3150 {
3151         unsigned int inmux = input % 8;
3152         gpio_inout( 0xf, 0xf );
3153         gpio_bits( 0xf, inmux );
3154 }
3155
3156 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input)
3157 {
3158         unsigned int inmux = input % 4;
3159         gpio_inout( 3<<9, 3<<9 );
3160         gpio_bits( 3<<9, inmux<<9 );
3161 }
3162
3163 static void geovision_muxsel(struct bttv *btv, unsigned int input)
3164 {
3165         unsigned int inmux = input % 16;
3166         gpio_inout(0xf, 0xf);
3167         gpio_bits(0xf, inmux);
3168 }
3169
3170 /*
3171  * The TD3116 has 2 74HC4051 muxes wired to the MUX0 input of a bt878.
3172  * The first 74HC4051 has the lower 8 inputs, the second one the higher 8.
3173  * The muxes are controlled via a 74HC373 latch which is connected to
3174  * GPIOs 0-7. GPIO 18 is connected to the LE signal of the latch.
3175  * Q0 of the latch is connected to the Enable (~E) input of the first
3176  * 74HC4051. Q1 - Q3 are connected to S0 - S2 of the same 74HC4051.
3177  * Q4 - Q7 are connected to the second 74HC4051 in the same way.
3178  */
3179
3180 static void td3116_latch_value(struct bttv *btv, u32 value)
3181 {
3182         gpio_bits((1<<18) | 0xff, value);
3183         gpio_bits((1<<18) | 0xff, (1<<18) | value);
3184         udelay(1);
3185         gpio_bits((1<<18) | 0xff, value);
3186 }
3187
3188 static void td3116_muxsel(struct bttv *btv, unsigned int input)
3189 {
3190         u32 value;
3191         u32 highbit;
3192
3193         highbit = (input & 0x8) >> 3 ;
3194
3195         /* Disable outputs and set value in the mux */
3196         value = 0x11; /* Disable outputs */
3197         value |= ((input & 0x7) << 1)  << (4 * highbit);
3198         td3116_latch_value(btv, value);
3199
3200         /* Enable the correct output */
3201         value &= ~0x11;
3202         value |= ((highbit ^ 0x1) << 4) | highbit;
3203         td3116_latch_value(btv, value);
3204 }
3205
3206 /* ----------------------------------------------------------------------- */
3207
3208 static void bttv_reset_audio(struct bttv *btv)
3209 {
3210         /*
3211          * BT878A has a audio-reset register.
3212          * 1. This register is an audio reset function but it is in
3213          *    function-0 (video capture) address space.
3214          * 2. It is enough to do this once per power-up of the card.
3215          * 3. There is a typo in the Conexant doc -- it is not at
3216          *    0x5B, but at 0x058. (B is an odd-number, obviously a typo!).
3217          * --//Shrikumar 030609
3218          */
3219         if (btv->id != 878)
3220                 return;
3221
3222         if (bttv_debug)
3223                 pr_debug("%d: BT878A ARESET\n", btv->c.nr);
3224         btwrite((1<<7), 0x058);
3225         udelay(10);
3226         btwrite(     0, 0x058);
3227 }
3228
3229 /* initialization part one -- before registering i2c bus */
3230 void __devinit bttv_init_card1(struct bttv *btv)
3231 {
3232         switch (btv->c.type) {
3233         case BTTV_BOARD_HAUPPAUGE:
3234         case BTTV_BOARD_HAUPPAUGE878:
3235                 boot_msp34xx(btv,5);
3236                 break;
3237         case BTTV_BOARD_VOODOOTV_200:
3238         case BTTV_BOARD_VOODOOTV_FM:
3239                 boot_msp34xx(btv,20);
3240                 break;
3241         case BTTV_BOARD_AVERMEDIA98:
3242                 boot_msp34xx(btv,11);
3243                 break;
3244         case BTTV_BOARD_HAUPPAUGEPVR:
3245                 pvr_boot(btv);
3246                 break;
3247         case BTTV_BOARD_TWINHAN_DST:
3248         case BTTV_BOARD_AVDVBT_771:
3249         case BTTV_BOARD_PINNACLESAT:
3250                 btv->use_i2c_hw = 1;
3251                 break;
3252         case BTTV_BOARD_ADLINK_RTV24:
3253                 init_RTV24( btv );
3254                 break;
3255
3256         }
3257         if (!bttv_tvcards[btv->c.type].has_dvb)
3258                 bttv_reset_audio(btv);
3259 }
3260
3261 /* initialization part two -- after registering i2c bus */
3262 void __devinit bttv_init_card2(struct bttv *btv)
3263 {
3264         btv->tuner_type = UNSET;
3265
3266         if (BTTV_BOARD_UNKNOWN == btv->c.type) {
3267                 bttv_readee(btv,eeprom_data,0xa0);
3268                 identify_by_eeprom(btv,eeprom_data);
3269         }
3270
3271         switch (btv->c.type) {
3272         case BTTV_BOARD_MIRO:
3273         case BTTV_BOARD_MIROPRO:
3274         case BTTV_BOARD_PINNACLE:
3275         case BTTV_BOARD_PINNACLEPRO:
3276                 /* miro/pinnacle */
3277                 miro_pinnacle_gpio(btv);
3278                 break;
3279         case BTTV_BOARD_FLYVIDEO_98:
3280         case BTTV_BOARD_MAXI:
3281         case BTTV_BOARD_LIFE_FLYKIT:
3282         case BTTV_BOARD_FLYVIDEO:
3283         case BTTV_BOARD_TYPHOON_TVIEW:
3284         case BTTV_BOARD_CHRONOS_VS2:
3285         case BTTV_BOARD_FLYVIDEO_98FM:
3286         case BTTV_BOARD_FLYVIDEO2000:
3287         case BTTV_BOARD_FLYVIDEO98EZ:
3288         case BTTV_BOARD_CONFERENCETV:
3289         case BTTV_BOARD_LIFETEC_9415:
3290                 flyvideo_gpio(btv);
3291                 break;
3292         case BTTV_BOARD_HAUPPAUGE:
3293         case BTTV_BOARD_HAUPPAUGE878:
3294         case BTTV_BOARD_HAUPPAUGEPVR:
3295                 /* pick up some config infos from the eeprom */
3296                 bttv_readee(btv,eeprom_data,0xa0);
3297                 hauppauge_eeprom(btv);
3298                 break;
3299         case BTTV_BOARD_AVERMEDIA98:
3300         case BTTV_BOARD_AVPHONE98:
3301                 bttv_readee(btv,eeprom_data,0xa0);
3302                 avermedia_eeprom(btv);
3303                 break;
3304         case BTTV_BOARD_PXC200:
3305                 init_PXC200(btv);
3306                 break;
3307         case BTTV_BOARD_PICOLO_TETRA_CHIP:
3308                 picolo_tetra_init(btv);
3309                 break;
3310         case BTTV_BOARD_VHX:
3311                 btv->has_radio    = 1;
3312                 btv->has_matchbox = 1;
3313                 btv->mbox_we      = 0x20;
3314                 btv->mbox_most    = 0;
3315                 btv->mbox_clk     = 0x08;
3316                 btv->mbox_data    = 0x10;
3317                 btv->mbox_mask    = 0x38;
3318                 break;
3319         case BTTV_BOARD_VOBIS_BOOSTAR:
3320         case BTTV_BOARD_TERRATV:
3321                 terratec_active_radio_upgrade(btv);
3322                 break;
3323         case BTTV_BOARD_MAGICTVIEW061:
3324                 if (btv->cardid == 0x3002144f) {
3325                         btv->has_radio=1;
3326                         pr_info("%d: radio detected by subsystem id (CPH05x)\n",
3327                                 btv->c.nr);
3328                 }
3329                 break;
3330         case BTTV_BOARD_STB2:
3331                 if (btv->cardid == 0x3060121a) {
3332                         /* Fix up entry for 3DFX VoodooTV 100,
3333                            which is an OEM STB card variant. */
3334                         btv->has_radio=0;
3335                         btv->tuner_type=TUNER_TEMIC_NTSC;
3336                 }
3337                 break;
3338         case BTTV_BOARD_OSPREY1x0:
3339         case BTTV_BOARD_OSPREY1x0_848:
3340         case BTTV_BOARD_OSPREY101_848:
3341         case BTTV_BOARD_OSPREY1x1:
3342         case BTTV_BOARD_OSPREY1x1_SVID:
3343         case BTTV_BOARD_OSPREY2xx:
3344         case BTTV_BOARD_OSPREY2x0_SVID:
3345         case BTTV_BOARD_OSPREY2x0:
3346         case BTTV_BOARD_OSPREY440:
3347         case BTTV_BOARD_OSPREY500:
3348         case BTTV_BOARD_OSPREY540:
3349         case BTTV_BOARD_OSPREY2000:
3350                 bttv_readee(btv,eeprom_data,0xa0);
3351                 osprey_eeprom(btv, eeprom_data);
3352                 break;
3353         case BTTV_BOARD_IDS_EAGLE:
3354                 init_ids_eagle(btv);
3355                 break;
3356         case BTTV_BOARD_MODTEC_205:
3357                 bttv_readee(btv,eeprom_data,0xa0);
3358                 modtec_eeprom(btv);
3359                 break;
3360         case BTTV_BOARD_LMLBT4:
3361                 init_lmlbt4x(btv);
3362                 break;
3363         case BTTV_BOARD_TIBET_CS16:
3364                 tibetCS16_init(btv);
3365                 break;
3366         case BTTV_BOARD_KODICOM_4400R:
3367                 kodicom4400r_init(btv);
3368                 break;
3369         case BTTV_BOARD_GEOVISION_GV800S:
3370                 gv800s_init(btv);
3371                 break;
3372         }
3373
3374         /* pll configuration */
3375         if (!(btv->id==848 && btv->revision==0x11)) {
3376                 /* defaults from card list */
3377                 if (PLL_28 == bttv_tvcards[btv->c.type].pll) {
3378                         btv->pll.pll_ifreq=28636363;
3379                         btv->pll.pll_crystal=BT848_IFORM_XT0;
3380                 }
3381                 if (PLL_35 == bttv_tvcards[btv->c.type].pll) {
3382                         btv->pll.pll_ifreq=35468950;
3383                         btv->pll.pll_crystal=BT848_IFORM_XT1;
3384                 }
3385                 /* insmod options can override */
3386                 switch (pll[btv->c.nr]) {
3387                 case 0: /* none */
3388                         btv->pll.pll_crystal = 0;
3389                         btv->pll.pll_ifreq   = 0;
3390                         btv->pll.pll_ofreq   = 0;
3391                         break;
3392                 case 1: /* 28 MHz */
3393                 case 28:
3394                         btv->pll.pll_ifreq   = 28636363;
3395                         btv->pll.pll_ofreq   = 0;
3396                         btv->pll.pll_crystal = BT848_IFORM_XT0;
3397                         break;
3398                 case 2: /* 35 MHz */
3399                 case 35:
3400                         btv->pll.pll_ifreq   = 35468950;
3401                         btv->pll.pll_ofreq   = 0;
3402                         btv->pll.pll_crystal = BT848_IFORM_XT1;
3403                         break;
3404                 }
3405         }
3406         btv->pll.pll_current = -1;
3407
3408         /* tuner configuration (from card list / autodetect / insmod option) */
3409         if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
3410                 if (UNSET == btv->tuner_type)
3411                         btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
3412         if (UNSET != tuner[btv->c.nr])
3413                 btv->tuner_type = tuner[btv->c.nr];
3414
3415         if (btv->tuner_type == TUNER_ABSENT)
3416                 pr_info("%d: tuner absent\n", btv->c.nr);
3417         else if (btv->tuner_type == UNSET)
3418                 pr_warn("%d: tuner type unset\n", btv->c.nr);
3419         else
3420                 pr_info("%d: tuner type=%d\n", btv->c.nr, btv->tuner_type);
3421
3422         if (autoload != UNSET) {
3423                 pr_warn("%d: the autoload option is obsolete\n", btv->c.nr);
3424                 pr_warn("%d: use option msp3400, tda7432 or tvaudio to override which audio module should be used\n",
3425                         btv->c.nr);
3426         }
3427
3428         if (UNSET == btv->tuner_type)
3429                 btv->tuner_type = TUNER_ABSENT;
3430
3431         btv->dig = bttv_tvcards[btv->c.type].has_dig_in ?
3432                    bttv_tvcards[btv->c.type].video_inputs - 1 : UNSET;
3433         btv->svhs = bttv_tvcards[btv->c.type].svhs == NO_SVHS ?
3434                     UNSET : bttv_tvcards[btv->c.type].svhs;
3435         if (svhs[btv->c.nr] != UNSET)
3436                 btv->svhs = svhs[btv->c.nr];
3437         if (remote[btv->c.nr] != UNSET)
3438                 btv->has_remote = remote[btv->c.nr];
3439
3440         if (bttv_tvcards[btv->c.type].has_radio)
3441                 btv->has_radio = 1;
3442         if (bttv_tvcards[btv->c.type].has_remote)
3443                 btv->has_remote = 1;
3444         if (!bttv_tvcards[btv->c.type].no_gpioirq)
3445                 btv->gpioirq = 1;
3446         if (bttv_tvcards[btv->c.type].volume_gpio)
3447                 btv->volume_gpio = bttv_tvcards[btv->c.type].volume_gpio;
3448         if (bttv_tvcards[btv->c.type].audio_mode_gpio)
3449                 btv->audio_mode_gpio = bttv_tvcards[btv->c.type].audio_mode_gpio;
3450
3451         if (btv->tuner_type == TUNER_ABSENT)
3452                 return;  /* no tuner or related drivers to load */
3453
3454         if (btv->has_saa6588 || saa6588[btv->c.nr]) {
3455                 /* Probe for RDS receiver chip */
3456                 static const unsigned short addrs[] = {
3457                         0x20 >> 1,
3458                         0x22 >> 1,
3459                         I2C_CLIENT_END
3460                 };
3461                 struct v4l2_subdev *sd;
3462
3463                 sd = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3464                         &btv->c.i2c_adap, "saa6588", 0, addrs);
3465                 btv->has_saa6588 = (sd != NULL);
3466         }
3467
3468         /* try to detect audio/fader chips */
3469
3470         /* First check if the user specified the audio chip via a module
3471            option. */
3472
3473         switch (audiodev[btv->c.nr]) {
3474         case -1:
3475                 return; /* do not load any audio module */
3476
3477         case 0: /* autodetect */
3478                 break;
3479
3480         case 1: {
3481                 /* The user specified that we should probe for msp3400 */
3482                 static const unsigned short addrs[] = {
3483                         I2C_ADDR_MSP3400 >> 1,
3484                         I2C_ADDR_MSP3400_ALT >> 1,
3485                         I2C_CLIENT_END
3486                 };
3487
3488                 btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3489                         &btv->c.i2c_adap, "msp3400", 0, addrs);
3490                 if (btv->sd_msp34xx)
3491                         return;
3492                 goto no_audio;
3493         }
3494
3495         case 2: {
3496                 /* The user specified that we should probe for tda7432 */
3497                 static const unsigned short addrs[] = {
3498                         I2C_ADDR_TDA7432 >> 1,
3499                         I2C_CLIENT_END
3500                 };
3501
3502                 if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3503                                 &btv->c.i2c_adap, "tda7432", 0, addrs))
3504                         return;
3505                 goto no_audio;
3506         }
3507
3508         case 3: {
3509                 /* The user specified that we should probe for tvaudio */
3510                 btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3511                         &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs());
3512                 if (btv->sd_tvaudio)
3513                         return;
3514                 goto no_audio;
3515         }
3516
3517         default:
3518                 pr_warn("%d: unknown audiodev value!\n", btv->c.nr);
3519                 return;
3520         }
3521
3522         /* There were no overrides, so now we try to discover this through the
3523            card definition */
3524
3525         /* probe for msp3400 first: this driver can detect whether or not
3526            it really is a msp3400, so it will return NULL when the device
3527            found is really something else (e.g. a tea6300). */
3528         if (!bttv_tvcards[btv->c.type].no_msp34xx) {
3529                 btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3530                         &btv->c.i2c_adap, "msp3400",
3531                         0, I2C_ADDRS(I2C_ADDR_MSP3400 >> 1));
3532         } else if (bttv_tvcards[btv->c.type].msp34xx_alt) {
3533                 btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3534                         &btv->c.i2c_adap, "msp3400",
3535                         0, I2C_ADDRS(I2C_ADDR_MSP3400_ALT >> 1));
3536         }
3537
3538         /* If we found a msp34xx, then we're done. */
3539         if (btv->sd_msp34xx)
3540                 return;
3541
3542         /* it might also be a tda7432. */
3543         if (!bttv_tvcards[btv->c.type].no_tda7432) {
3544                 static const unsigned short addrs[] = {
3545                         I2C_ADDR_TDA7432 >> 1,
3546                         I2C_CLIENT_END
3547                 };
3548
3549                 if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3550                                 &btv->c.i2c_adap, "tda7432", 0, addrs))
3551                         return;
3552         }
3553
3554         /* Now see if we can find one of the tvaudio devices. */
3555         btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3556                 &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs());
3557         if (btv->sd_tvaudio)
3558                 return;
3559
3560 no_audio:
3561         pr_warn("%d: audio absent, no audio device found!\n", btv->c.nr);
3562 }
3563
3564
3565 /* initialize the tuner */
3566 void __devinit bttv_init_tuner(struct bttv *btv)
3567 {
3568         int addr = ADDR_UNSET;
3569
3570         if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
3571                 addr = bttv_tvcards[btv->c.type].tuner_addr;
3572
3573         if (btv->tuner_type != TUNER_ABSENT) {
3574                 struct tuner_setup tun_setup;
3575
3576                 /* Load tuner module before issuing tuner config call! */
3577                 if (btv->has_radio)
3578                         v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3579                                 &btv->c.i2c_adap, "tuner",
3580                                 0, v4l2_i2c_tuner_addrs(ADDRS_RADIO));
3581                 v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3582                                 &btv->c.i2c_adap, "tuner",
3583                                 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
3584                 v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3585                                 &btv->c.i2c_adap, "tuner",
3586                                 0, v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD));
3587
3588                 tun_setup.mode_mask = T_ANALOG_TV;
3589                 tun_setup.type = btv->tuner_type;
3590                 tun_setup.addr = addr;
3591
3592                 if (btv->has_radio)
3593                         tun_setup.mode_mask |= T_RADIO;
3594
3595                 bttv_call_all(btv, tuner, s_type_addr, &tun_setup);
3596         }
3597
3598         if (btv->tda9887_conf) {
3599                 struct v4l2_priv_tun_config tda9887_cfg;
3600
3601                 tda9887_cfg.tuner = TUNER_TDA9887;
3602                 tda9887_cfg.priv = &btv->tda9887_conf;
3603
3604                 bttv_call_all(btv, tuner, s_config, &tda9887_cfg);
3605         }
3606 }
3607
3608 /* ----------------------------------------------------------------------- */
3609
3610 static void modtec_eeprom(struct bttv *btv)
3611 {
3612         if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) {
3613                 btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I;
3614                 pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
3615                         btv->c.nr, &eeprom_data[0x1e]);
3616         } else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) {
3617                 btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I;
3618                 pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
3619                         btv->c.nr, &eeprom_data[0x1e]);
3620         } else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) {
3621                 btv->tuner_type=TUNER_PHILIPS_NTSC;
3622                 pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
3623                         btv->c.nr, &eeprom_data[0x1e]);
3624         } else {
3625                 pr_info("%d: Modtec: Unknown TunerString: %s\n",
3626                         btv->c.nr, &eeprom_data[0x1e]);
3627         }
3628 }
3629
3630 static void __devinit hauppauge_eeprom(struct bttv *btv)
3631 {
3632         struct tveeprom tv;
3633
3634         tveeprom_hauppauge_analog(&btv->i2c_client, &tv, eeprom_data);
3635         btv->tuner_type = tv.tuner_type;
3636         btv->has_radio  = tv.has_radio;
3637
3638         pr_info("%d: Hauppauge eeprom indicates model#%d\n",
3639                 btv->c.nr, tv.model);
3640
3641         /*
3642          * Some of the 878 boards have duplicate PCI IDs. Switch the board
3643          * type based on model #.
3644          */
3645         if(tv.model == 64900) {
3646                 pr_info("%d: Switching board type from %s to %s\n",
3647                         btv->c.nr,
3648                         bttv_tvcards[btv->c.type].name,
3649                         bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name);
3650                 btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB;
3651         }
3652
3653         /* The 61334 needs the msp3410 to do the radio demod to get sound */
3654         if (tv.model == 61334)
3655                 btv->radio_uses_msp_demodulator = 1;
3656 }
3657
3658 static int terratec_active_radio_upgrade(struct bttv *btv)
3659 {
3660         int freq;
3661
3662         btv->has_radio    = 1;
3663         btv->has_matchbox = 1;
3664         btv->mbox_we      = 0x10;
3665         btv->mbox_most    = 0x20;
3666         btv->mbox_clk     = 0x08;
3667         btv->mbox_data    = 0x04;
3668         btv->mbox_mask    = 0x3c;
3669
3670         btv->mbox_iow     = 1 <<  8;
3671         btv->mbox_ior     = 1 <<  9;
3672         btv->mbox_csel    = 1 << 10;
3673
3674         freq=88000/62.5;
3675         tea5757_write(btv, 5 * freq + 0x358); /* write 0x1ed8 */
3676         if (0x1ed8 == tea5757_read(btv)) {
3677                 pr_info("%d: Terratec Active Radio Upgrade found\n", btv->c.nr);
3678                 btv->has_radio    = 1;
3679                 btv->has_saa6588  = 1;
3680                 btv->has_matchbox = 1;
3681         } else {
3682                 btv->has_radio    = 0;
3683                 btv->has_matchbox = 0;
3684         }
3685         return 0;
3686 }
3687
3688
3689 /* ----------------------------------------------------------------------- */
3690
3691 /*
3692  * minimal bootstrap for the WinTV/PVR -- upload altera firmware.
3693  *
3694  * The hcwamc.rbf firmware file is on the Hauppauge driver CD.  Have
3695  * a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be
3696  * unpacked with unzip).
3697  */
3698 #define PVR_GPIO_DELAY          10
3699
3700 #define BTTV_ALT_DATA           0x000001
3701 #define BTTV_ALT_DCLK           0x100000
3702 #define BTTV_ALT_NCONFIG        0x800000
3703
3704 static int __devinit pvr_altera_load(struct bttv *btv, const u8 *micro,
3705                                      u32 microlen)
3706 {
3707         u32 n;
3708         u8 bits;
3709         int i;
3710
3711         gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG);
3712         gpio_write(0);
3713         udelay(PVR_GPIO_DELAY);
3714
3715         gpio_write(BTTV_ALT_NCONFIG);
3716         udelay(PVR_GPIO_DELAY);
3717
3718         for (n = 0; n < microlen; n++) {
3719                 bits = micro[n];
3720                 for (i = 0 ; i < 8 ; i++) {
3721                         gpio_bits(BTTV_ALT_DCLK,0);
3722                         if (bits & 0x01)
3723                                 gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA);
3724                         else
3725                                 gpio_bits(BTTV_ALT_DATA,0);
3726                         gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3727                         bits >>= 1;
3728                 }
3729         }
3730         gpio_bits(BTTV_ALT_DCLK,0);
3731         udelay(PVR_GPIO_DELAY);
3732
3733         /* begin Altera init loop (Not necessary,but doesn't hurt) */
3734         for (i = 0 ; i < 30 ; i++) {
3735                 gpio_bits(BTTV_ALT_DCLK,0);
3736                 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3737         }
3738         gpio_bits(BTTV_ALT_DCLK,0);
3739         return 0;
3740 }
3741
3742 static int __devinit pvr_boot(struct bttv *btv)
3743 {
3744         const struct firmware *fw_entry;
3745         int rc;
3746
3747         rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev);
3748         if (rc != 0) {
3749                 pr_warn("%d: no altera firmware [via hotplug]\n", btv->c.nr);
3750                 return rc;
3751         }
3752         rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size);
3753         pr_info("%d: altera firmware upload %s\n",
3754                 btv->c.nr, (rc < 0) ? "failed" : "ok");
3755         release_firmware(fw_entry);
3756         return rc;
3757 }
3758
3759 /* ----------------------------------------------------------------------- */
3760 /* some osprey specific stuff                                              */
3761
3762 static void __devinit osprey_eeprom(struct bttv *btv, const u8 ee[256])
3763 {
3764         int i;
3765         u32 serial = 0;
3766         int cardid = -1;
3767
3768         /* This code will nevery actually get called in this case.... */
3769         if (btv->c.type == BTTV_BOARD_UNKNOWN) {
3770                 /* this might be an antique... check for MMAC label in eeprom */
3771                 if (!strncmp(ee, "MMAC", 4)) {
3772                         u8 checksum = 0;
3773                         for (i = 0; i < 21; i++)
3774                                 checksum += ee[i];
3775                         if (checksum != ee[21])
3776                                 return;
3777                         cardid = BTTV_BOARD_OSPREY1x0_848;
3778                         for (i = 12; i < 21; i++)
3779                                 serial *= 10, serial += ee[i] - '0';
3780                 }
3781         } else {
3782                 unsigned short type;
3783
3784                 for (i = 4*16; i < 8*16; i += 16) {
3785                         u16 checksum = ip_compute_csum(ee + i, 16);
3786
3787                         if ((checksum&0xff) + (checksum>>8) == 0xff)
3788                                 break;
3789                 }
3790                 if (i >= 8*16)
3791                         return;
3792                 ee += i;
3793
3794                 /* found a valid descriptor */
3795                 type = get_unaligned_be16((__be16 *)(ee+4));
3796
3797                 switch(type) {
3798                 /* 848 based */
3799                 case 0x0004:
3800                         cardid = BTTV_BOARD_OSPREY1x0_848;
3801                         break;
3802                 case 0x0005:
3803                         cardid = BTTV_BOARD_OSPREY101_848;
3804                         break;
3805
3806                 /* 878 based */
3807                 case 0x0012:
3808                 case 0x0013:
3809                         cardid = BTTV_BOARD_OSPREY1x0;
3810                         break;
3811                 case 0x0014:
3812                 case 0x0015:
3813                         cardid = BTTV_BOARD_OSPREY1x1;
3814                         break;
3815                 case 0x0016:
3816                 case 0x0017:
3817                 case 0x0020:
3818                         cardid = BTTV_BOARD_OSPREY1x1_SVID;
3819                         break;
3820                 case 0x0018:
3821                 case 0x0019:
3822                 case 0x001E:
3823                 case 0x001F:
3824                         cardid = BTTV_BOARD_OSPREY2xx;
3825                         break;
3826                 case 0x001A:
3827                 case 0x001B:
3828                         cardid = BTTV_BOARD_OSPREY2x0_SVID;
3829                         break;
3830                 case 0x0040:
3831                         cardid = BTTV_BOARD_OSPREY500;
3832                         break;
3833                 case 0x0050:
3834                 case 0x0056:
3835                         cardid = BTTV_BOARD_OSPREY540;
3836                         /* bttv_osprey_540_init(btv); */
3837                         break;
3838                 case 0x0060:
3839                 case 0x0070:
3840                 case 0x00A0:
3841                         cardid = BTTV_BOARD_OSPREY2x0;
3842                         /* enable output on select control lines */
3843                         gpio_inout(0xffffff,0x000303);
3844                         break;
3845                 case 0x00D8:
3846                         cardid = BTTV_BOARD_OSPREY440;
3847                         break;
3848                 default:
3849                         /* unknown...leave generic, but get serial # */
3850                         pr_info("%d: osprey eeprom: unknown card type 0x%04x\n",
3851                                 btv->c.nr, type);
3852                         break;
3853                 }
3854                 serial = get_unaligned_be32((__be32 *)(ee+6));
3855         }
3856
3857         pr_info("%d: osprey eeprom: card=%d '%s' serial=%u\n",
3858                 btv->c.nr, cardid,
3859                 cardid > 0 ? bttv_tvcards[cardid].name : "Unknown", serial);
3860
3861         if (cardid<0 || btv->c.type == cardid)
3862                 return;
3863
3864         /* card type isn't set correctly */
3865         if (card[btv->c.nr] < bttv_num_tvcards) {
3866                 pr_warn("%d: osprey eeprom: Not overriding user specified card type\n",
3867                         btv->c.nr);
3868         } else {
3869                 pr_info("%d: osprey eeprom: Changing card type from %d to %d\n",
3870                         btv->c.nr, btv->c.type, cardid);
3871                 btv->c.type = cardid;
3872         }
3873 }
3874
3875 /* ----------------------------------------------------------------------- */
3876 /* AVermedia specific stuff, from  bktr_card.c                             */
3877
3878 static int tuner_0_table[] = {
3879         TUNER_PHILIPS_NTSC,  TUNER_PHILIPS_PAL /* PAL-BG*/,
3880         TUNER_PHILIPS_PAL,   TUNER_PHILIPS_PAL /* PAL-I*/,
3881         TUNER_PHILIPS_PAL,   TUNER_PHILIPS_PAL,
3882         TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM,
3883         TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL,
3884         TUNER_PHILIPS_FM1216ME_MK3 };
3885
3886 static int tuner_1_table[] = {
3887         TUNER_TEMIC_NTSC,  TUNER_TEMIC_PAL,
3888         TUNER_TEMIC_PAL,   TUNER_TEMIC_PAL,
3889         TUNER_TEMIC_PAL,   TUNER_TEMIC_PAL,
3890         TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */
3891         TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL};
3892
3893 static void __devinit avermedia_eeprom(struct bttv *btv)
3894 {
3895         int tuner_make, tuner_tv_fm, tuner_format, tuner_type = 0;
3896
3897         tuner_make      = (eeprom_data[0x41] & 0x7);
3898         tuner_tv_fm     = (eeprom_data[0x41] & 0x18) >> 3;
3899         tuner_format    = (eeprom_data[0x42] & 0xf0) >> 4;
3900         btv->has_remote = (eeprom_data[0x42] & 0x01);
3901
3902         if (tuner_make == 0 || tuner_make == 2)
3903                 if (tuner_format <= 0x0a)
3904                         tuner_type = tuner_0_table[tuner_format];
3905         if (tuner_make == 1)
3906                 if (tuner_format <= 9)
3907                         tuner_type = tuner_1_table[tuner_format];
3908
3909         if (tuner_make == 4)
3910                 if (tuner_format == 0x09)
3911                         tuner_type = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
3912
3913         pr_info("%d: Avermedia eeprom[0x%02x%02x]: tuner=",
3914                 btv->c.nr, eeprom_data[0x41], eeprom_data[0x42]);
3915         if (tuner_type) {
3916                 btv->tuner_type = tuner_type;
3917                 pr_cont("%d", tuner_type);
3918         } else
3919                 pr_cont("Unknown type");
3920         pr_cont(" radio:%s remote control:%s\n",
3921                tuner_tv_fm     ? "yes" : "no",
3922                btv->has_remote ? "yes" : "no");
3923 }
3924
3925 /*
3926  * For Voodoo TV/FM and Voodoo 200.  These cards' tuners use a TDA9880
3927  * analog demod, which is not I2C controlled like the newer and more common
3928  * TDA9887 series.  Instead is has two tri-state input pins, S0 and S1,
3929  * that control the IF for the video and audio.  Apparently, bttv GPIO
3930  * 0x10000 is connected to S0.  S0 low selects a 38.9 MHz VIF for B/G/D/K/I
3931  * (i.e., PAL) while high selects 45.75 MHz for M/N (i.e., NTSC).
3932  */
3933 u32 bttv_tda9880_setnorm(struct bttv *btv, u32 gpiobits)
3934 {
3935
3936         if (btv->audio == TVAUDIO_INPUT_TUNER) {
3937                 if (bttv_tvnorms[btv->tvnorm].v4l2_id & V4L2_STD_MN)
3938                         gpiobits |= 0x10000;
3939                 else
3940                         gpiobits &= ~0x10000;
3941         }
3942
3943         gpio_bits(bttv_tvcards[btv->c.type].gpiomask, gpiobits);
3944         return gpiobits;
3945 }
3946
3947
3948 /*
3949  * reset/enable the MSP on some Hauppauge cards
3950  * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)!
3951  *
3952  * Hauppauge:  pin  5
3953  * Voodoo:     pin 20
3954  */
3955 static void __devinit boot_msp34xx(struct bttv *btv, int pin)
3956 {
3957         int mask = (1 << pin);
3958
3959         gpio_inout(mask,mask);
3960         gpio_bits(mask,0);
3961         mdelay(2);
3962         udelay(500);
3963         gpio_bits(mask,mask);
3964
3965         if (bttv_gpio)
3966                 bttv_gpio_tracking(btv,"msp34xx");
3967         if (bttv_verbose)
3968                 pr_info("%d: Hauppauge/Voodoo msp34xx: reset line init [%d]\n",
3969                         btv->c.nr, pin);
3970 }
3971
3972 /* ----------------------------------------------------------------------- */
3973 /*  Imagenation L-Model PXC200 Framegrabber */
3974 /*  This is basically the same procedure as
3975  *  used by Alessandro Rubini in his pxc200
3976  *  driver, but using BTTV functions */
3977
3978 static void __devinit init_PXC200(struct bttv *btv)
3979 {
3980         static int vals[] __devinitdata = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d,
3981                                             0x01, 0x02, 0x03, 0x04, 0x05, 0x06,
3982                                             0x00 };
3983         unsigned int i;
3984         int tmp;
3985         u32 val;
3986
3987         /* Initialise GPIO-connevted stuff */
3988         gpio_inout(0xffffff, (1<<13));
3989         gpio_write(0);
3990         udelay(3);
3991         gpio_write(1<<13);
3992         /* GPIO inputs are pulled up, so no need to drive
3993          * reset pin any longer */
3994         gpio_bits(0xffffff, 0);
3995         if (bttv_gpio)
3996                 bttv_gpio_tracking(btv,"pxc200");
3997
3998         /*  we could/should try and reset/control the AD pots? but
3999             right now  we simply  turned off the crushing.  Without
4000             this the AGC drifts drifts
4001             remember the EN is reverse logic -->
4002             setting BT848_ADC_AGC_EN disable the AGC
4003             tboult@eecs.lehigh.edu
4004         */
4005
4006         btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC);
4007
4008         /*      Initialise MAX517 DAC */
4009         pr_info("Setting DAC reference voltage level ...\n");
4010         bttv_I2CWrite(btv,0x5E,0,0x80,1);
4011
4012         /*      Initialise 12C508 PIC */
4013         /*      The I2CWrite and I2CRead commmands are actually to the
4014          *      same chips - but the R/W bit is included in the address
4015          *      argument so the numbers are different */
4016
4017
4018         pr_info("Initialising 12C508 PIC chip ...\n");
4019
4020         /* First of all, enable the clock line. This is used in the PXC200-F */
4021         val = btread(BT848_GPIO_DMA_CTL);
4022         val |= BT848_GPIO_DMA_CTL_GPCLKMODE;
4023         btwrite(val, BT848_GPIO_DMA_CTL);
4024
4025         /* Then, push to 0 the reset pin long enough to reset the *
4026          * device same as above for the reset line, but not the same
4027          * value sent to the GPIO-connected stuff
4028          * which one is the good one? */
4029         gpio_inout(0xffffff,(1<<2));
4030         gpio_write(0);
4031         udelay(10);
4032         gpio_write(1<<2);
4033
4034         for (i = 0; i < ARRAY_SIZE(vals); i++) {
4035                 tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1);
4036                 if (tmp != -1) {
4037                         pr_info("I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
4038                                vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL));
4039                 }
4040         }
4041
4042         pr_info("PXC200 Initialised\n");
4043 }
4044
4045
4046
4047 /* ----------------------------------------------------------------------- */
4048 /*
4049  *  The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock
4050  *  it. This apparently involves the following procedure for each 878 chip:
4051  *
4052  *  1) write 0x00C3FEFF to the GPIO_OUT_EN register
4053  *
4054  *  2)  write to GPIO_DATA
4055  *      - 0x0E
4056  *      - sleep 1ms
4057  *      - 0x10 + 0x0E
4058  *      - sleep 10ms
4059  *      - 0x0E
4060  *     read from GPIO_DATA into buf (uint_32)
4061  *      - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 )
4062  *                 error. ERROR_CPLD_Check_Failed stop.
4063  *
4064  *  3) write to GPIO_DATA
4065  *      - write 0x4400 + 0x0E
4066  *      - sleep 10ms
4067  *      - write 0x4410 + 0x0E
4068  *      - sleep 1ms
4069  *      - write 0x0E
4070  *     read from GPIO_DATA into buf (uint_32)
4071  *      - if ( buf>>18 & 0x01 ) || ( buf>>19 & 0x01 != 0 )
4072  *                error. ERROR_CPLD_Check_Failed.
4073  */
4074 /* ----------------------------------------------------------------------- */
4075 static void
4076 init_RTV24 (struct bttv *btv)
4077 {
4078         uint32_t dataRead = 0;
4079         long watchdog_value = 0x0E;
4080
4081         pr_info("%d: Adlink RTV-24 initialisation in progress ...\n",
4082                 btv->c.nr);
4083
4084         btwrite (0x00c3feff, BT848_GPIO_OUT_EN);
4085
4086         btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4087         msleep (1);
4088         btwrite (0x10 + watchdog_value, BT848_GPIO_DATA);
4089         msleep (10);
4090         btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4091
4092         dataRead = btread (BT848_GPIO_DATA);
4093
4094         if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) {
4095                 pr_info("%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n",
4096                         btv->c.nr, dataRead);
4097         }
4098
4099         btwrite (0x4400 + watchdog_value, BT848_GPIO_DATA);
4100         msleep (10);
4101         btwrite (0x4410 + watchdog_value, BT848_GPIO_DATA);
4102         msleep (1);
4103         btwrite (watchdog_value, BT848_GPIO_DATA);
4104         msleep (1);
4105         dataRead = btread (BT848_GPIO_DATA);
4106
4107         if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) {
4108                 pr_info("%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n",
4109                         btv->c.nr, dataRead);
4110
4111                 return;
4112         }
4113
4114         pr_info("%d: Adlink RTV-24 initialisation complete\n", btv->c.nr);
4115 }
4116
4117
4118
4119 /* ----------------------------------------------------------------------- */
4120 /* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports     */
4121 /*
4122  * Copyright (c) 1999 Csaba Halasz <qgehali@uni-miskolc.hu>
4123  * This code is placed under the terms of the GNU General Public License
4124  *
4125  * Brutally hacked by Dan Sheridan <dan.sheridan@contact.org.uk> djs52 8/3/00
4126  */
4127
4128 static void bus_low(struct bttv *btv, int bit)
4129 {
4130         if (btv->mbox_ior) {
4131                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4132                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4133                 udelay(5);
4134         }
4135
4136         gpio_bits(bit,0);
4137         udelay(5);
4138
4139         if (btv->mbox_ior) {
4140                 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4141                 udelay(5);
4142         }
4143 }
4144
4145 static void bus_high(struct bttv *btv, int bit)
4146 {
4147         if (btv->mbox_ior) {
4148                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4149                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4150                 udelay(5);
4151         }
4152
4153         gpio_bits(bit,bit);
4154         udelay(5);
4155
4156         if (btv->mbox_ior) {
4157                 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4158                 udelay(5);
4159         }
4160 }
4161
4162 static int bus_in(struct bttv *btv, int bit)
4163 {
4164         if (btv->mbox_ior) {
4165                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4166                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4167                 udelay(5);
4168
4169                 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4170                 udelay(5);
4171         }
4172         return gpio_read() & (bit);
4173 }
4174
4175 /* TEA5757 register bits */
4176 #define TEA_FREQ                0:14
4177 #define TEA_BUFFER              15:15
4178
4179 #define TEA_SIGNAL_STRENGTH     16:17
4180
4181 #define TEA_PORT1               18:18
4182 #define TEA_PORT0               19:19
4183
4184 #define TEA_BAND                20:21
4185 #define TEA_BAND_FM             0
4186 #define TEA_BAND_MW             1
4187 #define TEA_BAND_LW             2
4188 #define TEA_BAND_SW             3
4189
4190 #define TEA_MONO                22:22
4191 #define TEA_ALLOW_STEREO        0
4192 #define TEA_FORCE_MONO          1
4193
4194 #define TEA_SEARCH_DIRECTION    23:23
4195 #define TEA_SEARCH_DOWN         0
4196 #define TEA_SEARCH_UP           1
4197
4198 #define TEA_STATUS              24:24
4199 #define TEA_STATUS_TUNED        0
4200 #define TEA_STATUS_SEARCHING    1
4201
4202 /* Low-level stuff */
4203 static int tea5757_read(struct bttv *btv)
4204 {
4205         unsigned long timeout;
4206         int value = 0;
4207         int i;
4208
4209         /* better safe than sorry */
4210         gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we);
4211
4212         if (btv->mbox_ior) {
4213                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4214                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4215                 udelay(5);
4216         }
4217
4218         if (bttv_gpio)
4219                 bttv_gpio_tracking(btv,"tea5757 read");
4220
4221         bus_low(btv,btv->mbox_we);
4222         bus_low(btv,btv->mbox_clk);
4223
4224         udelay(10);
4225         timeout= jiffies + msecs_to_jiffies(1000);
4226
4227         /* wait for DATA line to go low; error if it doesn't */
4228         while (bus_in(btv,btv->mbox_data) && time_before(jiffies, timeout))
4229                 schedule();
4230         if (bus_in(btv,btv->mbox_data)) {
4231                 pr_warn("%d: tea5757: read timeout\n", btv->c.nr);
4232                 return -1;
4233         }
4234
4235         dprintk("%d: tea5757:", btv->c.nr);
4236         for (i = 0; i < 24; i++) {
4237                 udelay(5);
4238                 bus_high(btv,btv->mbox_clk);
4239                 udelay(5);
4240                 dprintk_cont("%c",
4241                              bus_in(btv, btv->mbox_most) == 0 ? 'T' : '-');
4242                 bus_low(btv,btv->mbox_clk);
4243                 value <<= 1;
4244                 value |= (bus_in(btv,btv->mbox_data) == 0)?0:1;  /* MSB first */
4245                 dprintk_cont("%c",
4246                              bus_in(btv, btv->mbox_most) == 0 ? 'S' : 'M');
4247         }
4248         dprintk_cont("\n");
4249         dprintk("%d: tea5757: read 0x%X\n", btv->c.nr, value);
4250         return value;
4251 }
4252
4253 static int tea5757_write(struct bttv *btv, int value)
4254 {
4255         int i;
4256         int reg = value;
4257
4258         gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we | btv->mbox_data);
4259
4260         if (btv->mbox_ior) {
4261                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4262                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4263                 udelay(5);
4264         }
4265         if (bttv_gpio)
4266                 bttv_gpio_tracking(btv,"tea5757 write");
4267
4268         dprintk("%d: tea5757: write 0x%X\n", btv->c.nr, value);
4269         bus_low(btv,btv->mbox_clk);
4270         bus_high(btv,btv->mbox_we);
4271         for (i = 0; i < 25; i++) {
4272                 if (reg & 0x1000000)
4273                         bus_high(btv,btv->mbox_data);
4274                 else
4275                         bus_low(btv,btv->mbox_data);
4276                 reg <<= 1;
4277                 bus_high(btv,btv->mbox_clk);
4278                 udelay(10);
4279                 bus_low(btv,btv->mbox_clk);
4280                 udelay(10);
4281         }
4282         bus_low(btv,btv->mbox_we);  /* unmute !!! */
4283         return 0;
4284 }
4285
4286 void tea5757_set_freq(struct bttv *btv, unsigned short freq)
4287 {
4288         dprintk("tea5757_set_freq %d\n",freq);
4289         tea5757_write(btv, 5 * freq + 0x358); /* add 10.7MHz (see docs) */
4290 }
4291
4292 /* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
4293  *
4294  * This is needed because rv605 don't use a normal multiplex, but a crosspoint
4295  * switch instead (CD22M3494E). This IC can have multiple active connections
4296  * between Xn (input) and Yn (output) pins. We need to clear any existing
4297  * connection prior to establish a new one, pulsing the STROBE pin.
4298  *
4299  * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
4300  * GPIO pins are wired as:
4301  *  GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroller)
4302  *  GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroller)
4303  *  GPIO[7]   - DATA (xpoint)    - P1[7] (microcontroller)
4304  *  GPIO[8]   -                  - P3[5] (microcontroller)
4305  *  GPIO[9]   - RESET (xpoint)   - P3[6] (microcontroller)
4306  *  GPIO[10]  - STROBE (xpoint)  - P3[7] (microcontroller)
4307  *  GPINTR    -                  - P3[4] (microcontroller)
4308  *
4309  * The microcontroller is a 80C32 like. It should be possible to change xpoint
4310  * configuration either directly (as we are doing) or using the microcontroller
4311  * which is also wired to I2C interface. I have no further info on the
4312  * microcontroller features, one would need to disassembly the firmware.
4313  * note: the vendor refused to give any information on this product, all
4314  *       that stuff was found using a multimeter! :)
4315  */
4316 static void rv605_muxsel(struct bttv *btv, unsigned int input)
4317 {
4318         static const u8 muxgpio[] = { 0x3, 0x1, 0x2, 0x4, 0xf, 0x7, 0xe, 0x0,
4319                                       0xd, 0xb, 0xc, 0x6, 0x9, 0x5, 0x8, 0xa };
4320
4321         gpio_bits(0x07f, muxgpio[input]);
4322
4323         /* reset all conections */
4324         gpio_bits(0x200,0x200);
4325         mdelay(1);
4326         gpio_bits(0x200,0x000);
4327         mdelay(1);
4328
4329         /* create a new connection */
4330         gpio_bits(0x480,0x480);
4331         mdelay(1);
4332         gpio_bits(0x480,0x080);
4333         mdelay(1);
4334 }
4335
4336 /* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning]
4337  *
4338  * The CS16 (available on eBay cheap) is a PCI board with four Fusion
4339  * 878A chips, a PCI bridge, an Atmel microcontroller, four sync separator
4340  * chips, ten eight input analog multiplexors, a not chip and a few
4341  * other components.
4342  *
4343  * 16 inputs on a secondary bracket are provided and can be selected
4344  * from each of the four capture chips.  Two of the eight input
4345  * multiplexors are used to select from any of the 16 input signals.
4346  *
4347  * Unsupported hardware capabilities:
4348  *  . A video output monitor on the secondary bracket can be selected from
4349  *    one of the 878A chips.
4350  *  . Another passthrough but I haven't spent any time investigating it.
4351  *  . Digital I/O (logic level connected to GPIO) is available from an
4352  *    onboard header.
4353  *
4354  * The on chip input mux should always be set to 2.
4355  * GPIO[16:19] - Video input selection
4356  * GPIO[0:3]   - Video output monitor select (only available from one 878A)
4357  * GPIO[?:?]   - Digital I/O.
4358  *
4359  * There is an ATMEL microcontroller with an 8031 core on board.  I have not
4360  * determined what function (if any) it provides.  With the microcontroller
4361  * and sync separator chips a guess is that it might have to do with video
4362  * switching and maybe some digital I/O.
4363  */
4364 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input)
4365 {
4366         /* video mux */
4367         gpio_bits(0x0f0000, input << 16);
4368 }
4369
4370 static void tibetCS16_init(struct bttv *btv)
4371 {
4372         /* enable gpio bits, mask obtained via btSpy */
4373         gpio_inout(0xffffff, 0x0f7fff);
4374         gpio_write(0x0f7fff);
4375 }
4376
4377 /*
4378  * The following routines for the Kodicom-4400r get a little mind-twisting.
4379  * There is a "master" controller and three "slave" controllers, together
4380  * an analog switch which connects any of 16 cameras to any of the BT87A's.
4381  * The analog switch is controlled by the "master", but the detection order
4382  * of the four BT878A chips is in an order which I just don't understand.
4383  * The "master" is actually the second controller to be detected.  The
4384  * logic on the board uses logical numbers for the 4 controllers, but
4385  * those numbers are different from the detection sequence.  When working
4386  * with the analog switch, we need to "map" from the detection sequence
4387  * over to the board's logical controller number.  This mapping sequence
4388  * is {3, 0, 2, 1}, i.e. the first controller to be detected is logical
4389  * unit 3, the second (which is the master) is logical unit 0, etc.
4390  * We need to maintain the status of the analog switch (which of the 16
4391  * cameras is connected to which of the 4 controllers).  Rather than
4392  * add to the bttv structure for this, we use the data reserved for
4393  * the mbox (unused for this card type).
4394  */
4395
4396 /*
4397  * First a routine to set the analog switch, which controls which camera
4398  * is routed to which controller.  The switch comprises an X-address
4399  * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4400  * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4401  * A data value (gpio bit 7) of '1' enables the switch, and '0' disables
4402  * the switch.  A STROBE bit (gpio bit 8) latches the data value into the
4403  * specified address.  The idea is to set the address and data, then bring
4404  * STROBE high, and finally bring STROBE back to low.
4405  */
4406 static void kodicom4400r_write(struct bttv *btv,
4407                                unsigned char xaddr,
4408                                unsigned char yaddr,
4409                                unsigned char data) {
4410         unsigned int udata;
4411
4412         udata = (data << 7) | ((yaddr&3) << 4) | (xaddr&0xf);
4413         gpio_bits(0x1ff, udata);                /* write ADDR and DAT */
4414         gpio_bits(0x1ff, udata | (1 << 8));     /* strobe high */
4415         gpio_bits(0x1ff, udata);                /* strobe low */
4416 }
4417
4418 /*
4419  * Next the mux select.  Both the "master" and "slave" 'cards' (controllers)
4420  * use this routine.  The routine finds the "master" for the card, maps
4421  * the controller number from the detected position over to the logical
4422  * number, writes the appropriate data to the analog switch, and housekeeps
4423  * the local copy of the switch information.  The parameter 'input' is the
4424  * requested camera number (0 - 15).
4425  */
4426 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input)
4427 {
4428         char *sw_status;
4429         int xaddr, yaddr;
4430         struct bttv *mctlr;
4431         static unsigned char map[4] = {3, 0, 2, 1};
4432
4433         mctlr = master[btv->c.nr];
4434         if (mctlr == NULL) {    /* ignore if master not yet detected */
4435                 return;
4436         }
4437         yaddr = (btv->c.nr - mctlr->c.nr + 1) & 3; /* the '&' is for safety */
4438         yaddr = map[yaddr];
4439         sw_status = (char *)(&mctlr->mbox_we);
4440         xaddr = input & 0xf;
4441         /* Check if the controller/camera pair has changed, else ignore */
4442         if (sw_status[yaddr] != xaddr)
4443         {
4444                 /* "open" the old switch, "close" the new one, save the new */
4445                 kodicom4400r_write(mctlr, sw_status[yaddr], yaddr, 0);
4446                 sw_status[yaddr] = xaddr;
4447                 kodicom4400r_write(mctlr, xaddr, yaddr, 1);
4448         }
4449 }
4450
4451 /*
4452  * During initialisation, we need to reset the analog switch.  We
4453  * also preset the switch to map the 4 connectors on the card to the
4454  * *user's* (see above description of kodicom4400r_muxsel) channels
4455  * 0 through 3
4456  */
4457 static void kodicom4400r_init(struct bttv *btv)
4458 {
4459         char *sw_status = (char *)(&btv->mbox_we);
4460         int ix;
4461
4462         gpio_inout(0x0003ff, 0x0003ff);
4463         gpio_write(1 << 9);     /* reset MUX */
4464         gpio_write(0);
4465         /* Preset camera 0 to the 4 controllers */
4466         for (ix = 0; ix < 4; ix++) {
4467                 sw_status[ix] = ix;
4468                 kodicom4400r_write(btv, ix, ix, 1);
4469         }
4470         /*
4471          * Since this is the "master", we need to set up the
4472          * other three controller chips' pointers to this structure
4473          * for later use in the muxsel routine.
4474          */
4475         if ((btv->c.nr<1) || (btv->c.nr>BTTV_MAX-3))
4476             return;
4477         master[btv->c.nr-1] = btv;
4478         master[btv->c.nr]   = btv;
4479         master[btv->c.nr+1] = btv;
4480         master[btv->c.nr+2] = btv;
4481 }
4482
4483 /* The Grandtec X-Guard framegrabber card uses two Dual 4-channel
4484  * video multiplexers to provide up to 16 video inputs. These
4485  * multiplexers are controlled by the lower 8 GPIO pins of the
4486  * bt878. The multiplexers probably Pericom PI5V331Q or similar.
4487
4488  * xxx0 is pin xxx of multiplexer U5,
4489  * yyy1 is pin yyy of multiplexer U2
4490  */
4491 #define ENA0    0x01
4492 #define ENB0    0x02
4493 #define ENA1    0x04
4494 #define ENB1    0x08
4495
4496 #define IN10    0x10
4497 #define IN00    0x20
4498 #define IN11    0x40
4499 #define IN01    0x80
4500
4501 static void xguard_muxsel(struct bttv *btv, unsigned int input)
4502 {
4503         static const int masks[] = {
4504                 ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10,
4505                 ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10,
4506                 ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11,
4507                 ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11,
4508         };
4509         gpio_write(masks[input%16]);
4510 }
4511 static void picolo_tetra_init(struct bttv *btv)
4512 {
4513         /*This is the video input redirection fonctionality : I DID NOT USED IT. */
4514         btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */
4515         btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A]  set to 1*/
4516 }
4517 static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input)
4518 {
4519
4520         dprintk("%d : picolo_tetra_muxsel =>  input = %d\n", btv->c.nr, input);
4521         /*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/
4522         /*GPIO[20]&GPIO[21] used to choose the right input*/
4523         btwrite (input<<20,BT848_GPIO_DATA);
4524
4525 }
4526
4527 /*
4528  * ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>]
4529  *
4530  * The IVC120G security card has 4 i2c controlled TDA8540 matrix
4531  * swichers to provide 16 channels to MUX0. The TDA8540's have
4532  * 4 independent outputs and as such the IVC120G also has the
4533  * optional "Monitor Out" bus. This allows the card to be looking
4534  * at one input while the monitor is looking at another.
4535  *
4536  * Since I've couldn't be bothered figuring out how to add an
4537  * independent muxsel for the monitor bus, I've just set it to
4538  * whatever the card is looking at.
4539  *
4540  *  OUT0 of the TDA8540's is connected to MUX0         (0x03)
4541  *  OUT1 of the TDA8540's is connected to "Monitor Out"        (0x0C)
4542  *
4543  *  TDA8540_ALT3 IN0-3 = Channel 13 - 16       (0x03)
4544  *  TDA8540_ALT4 IN0-3 = Channel 1 - 4         (0x03)
4545  *  TDA8540_ALT5 IN0-3 = Channel 5 - 8         (0x03)
4546  *  TDA8540_ALT6 IN0-3 = Channel 9 - 12                (0x03)
4547  *
4548  */
4549
4550 /* All 7 possible sub-ids for the TDA8540 Matrix Switcher */
4551 #define I2C_TDA8540        0x90
4552 #define I2C_TDA8540_ALT1   0x92
4553 #define I2C_TDA8540_ALT2   0x94
4554 #define I2C_TDA8540_ALT3   0x96
4555 #define I2C_TDA8540_ALT4   0x98
4556 #define I2C_TDA8540_ALT5   0x9a
4557 #define I2C_TDA8540_ALT6   0x9c
4558
4559 static void ivc120_muxsel(struct bttv *btv, unsigned int input)
4560 {
4561         /* Simple maths */
4562         int key = input % 4;
4563         int matrix = input / 4;
4564
4565         dprintk("%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
4566                 btv->c.nr, input, matrix, key);
4567
4568         /* Handles the input selection on the TDA8540's */
4569         bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00,
4570                       ((matrix == 3) ? (key | key << 2) : 0x00), 1);
4571         bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00,
4572                       ((matrix == 0) ? (key | key << 2) : 0x00), 1);
4573         bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00,
4574                       ((matrix == 1) ? (key | key << 2) : 0x00), 1);
4575         bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00,
4576                       ((matrix == 2) ? (key | key << 2) : 0x00), 1);
4577
4578         /* Handles the output enables on the TDA8540's */
4579         bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02,
4580                       ((matrix == 3) ? 0x03 : 0x00), 1);  /* 13 - 16 */
4581         bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02,
4582                       ((matrix == 0) ? 0x03 : 0x00), 1);  /* 1-4 */
4583         bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02,
4584                       ((matrix == 1) ? 0x03 : 0x00), 1);  /* 5-8 */
4585         bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02,
4586                       ((matrix == 2) ? 0x03 : 0x00), 1);  /* 9-12 */
4587
4588         /* 878's MUX0 is already selected for input via muxsel values */
4589 }
4590
4591
4592 /* PXC200 muxsel helper
4593  * luke@syseng.anu.edu.au
4594  * another transplant
4595  * from Alessandro Rubini (rubini@linux.it)
4596  *
4597  * There are 4 kinds of cards:
4598  * PXC200L which is bt848
4599  * PXC200F which is bt848 with PIC controlling mux
4600  * PXC200AL which is bt878
4601  * PXC200AF which is bt878 with PIC controlling mux
4602  */
4603 #define PX_CFG_PXC200F 0x01
4604 #define PX_FLAG_PXC200A  0x00001000 /* a pxc200A is bt-878 based */
4605 #define PX_I2C_PIC       0x0f
4606 #define PX_PXC200A_CARDID 0x200a1295
4607 #define PX_I2C_CMD_CFG   0x00
4608
4609 static void PXC200_muxsel(struct bttv *btv, unsigned int input)
4610 {
4611         int rc;
4612         long mux;
4613         int bitmask;
4614         unsigned char buf[2];
4615
4616         /* Read PIC config to determine if this is a PXC200F */
4617         /* PX_I2C_CMD_CFG*/
4618         buf[0]=0;
4619         buf[1]=0;
4620         rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1);
4621         if (rc) {
4622                 pr_debug("%d: PXC200_muxsel: pic cfg write failed:%d\n",
4623                          btv->c.nr, rc);
4624           /* not PXC ? do nothing */
4625                 return;
4626         }
4627
4628         rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL);
4629         if (!(rc & PX_CFG_PXC200F)) {
4630                 pr_debug("%d: PXC200_muxsel: not PXC200F rc:%d\n",
4631                          btv->c.nr, rc);
4632                 return;
4633         }
4634
4635
4636         /* The multiplexer in the 200F is handled by the GPIO port */
4637         /* get correct mapping between inputs  */
4638         /*  mux = bttv_tvcards[btv->type].muxsel[input] & 3; */
4639         /* ** not needed!?   */
4640         mux = input;
4641
4642         /* make sure output pins are enabled */
4643         /* bitmask=0x30f; */
4644         bitmask=0x302;
4645         /* check whether we have a PXC200A */
4646         if (btv->cardid == PX_PXC200A_CARDID)  {
4647            bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */
4648            bitmask |= 7<<4; /* the DAC */
4649         }
4650         btwrite(bitmask, BT848_GPIO_OUT_EN);
4651
4652         bitmask = btread(BT848_GPIO_DATA);
4653         if (btv->cardid == PX_PXC200A_CARDID)
4654           bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7);
4655         else /* older device */
4656           bitmask = (bitmask & ~0x300) | ((mux & 3) << 8);
4657         btwrite(bitmask,BT848_GPIO_DATA);
4658
4659         /*
4660          * Was "to be safe, set the bt848 to input 0"
4661          * Actually, since it's ok at load time, better not messing
4662          * with these bits (on PXC200AF you need to set mux 2 here)
4663          *
4664          * needed because bttv-driver sets mux before calling this function
4665          */
4666         if (btv->cardid == PX_PXC200A_CARDID)
4667           btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM);
4668         else /* older device */
4669           btand(~BT848_IFORM_MUXSEL,BT848_IFORM);
4670
4671         pr_debug("%d: setting input channel to:%d\n", btv->c.nr, (int)mux);
4672 }
4673
4674 static void phytec_muxsel(struct bttv *btv, unsigned int input)
4675 {
4676         unsigned int mux = input % 4;
4677
4678         if (input == btv->svhs)
4679                 mux = 0;
4680
4681         gpio_bits(0x3, mux);
4682 }
4683
4684 /*
4685  * GeoVision GV-800(S) functions
4686  * Bruno Christo <bchristo@inf.ufsm.br>
4687 */
4688
4689 /* This is a function to control the analog switch, which determines which
4690  * camera is routed to which controller.  The switch comprises an X-address
4691  * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4692  * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4693  * A data value (gpio bit 18) of '1' enables the switch, and '0' disables
4694  * the switch.  A STROBE bit (gpio bit 17) latches the data value into the
4695  * specified address. There is also a chip select (gpio bit 16).
4696  * The idea is to set the address and chip select together, bring
4697  * STROBE high, write the data, and finally bring STROBE back to low.
4698  */
4699 static void gv800s_write(struct bttv *btv,
4700                          unsigned char xaddr,
4701                          unsigned char yaddr,
4702                          unsigned char data) {
4703         /* On the "master" 878A:
4704         * GPIO bits 0-9 are used for the analog switch:
4705         *   00 - 03:    camera selector
4706         *   04 - 06:    878A (controller) selector
4707         *   16:         cselect
4708         *   17:         strobe
4709         *   18:         data (1->on, 0->off)
4710         *   19:         reset
4711         */
4712         const u32 ADDRESS = ((xaddr&0xf) | (yaddr&3)<<4);
4713         const u32 CSELECT = 1<<16;
4714         const u32 STROBE = 1<<17;
4715         const u32 DATA = data<<18;
4716
4717         gpio_bits(0x1007f, ADDRESS | CSELECT);  /* write ADDRESS and CSELECT */
4718         gpio_bits(0x20000, STROBE);             /* STROBE high */
4719         gpio_bits(0x40000, DATA);               /* write DATA */
4720         gpio_bits(0x20000, ~STROBE);            /* STROBE low */
4721 }
4722
4723 /*
4724  * GeoVision GV-800(S) muxsel
4725  *
4726  * Each of the 4 cards (controllers) use this function.
4727  * The controller using this function selects the input through the GPIO pins
4728  * of the "master" card. A pointer to this card is stored in master[btv->c.nr].
4729  *
4730  * The parameter 'input' is the requested camera number (0-4) on the controller.
4731  * The map array has the address of each input. Note that the addresses in the
4732  * array are in the sequence the original GeoVision driver uses, that is, set
4733  * every controller to input 0, then to input 1, 2, 3, repeat. This means that
4734  * the physical "camera 1" connector corresponds to controller 0 input 0,
4735  * "camera 2" corresponds to controller 1 input 0, and so on.
4736  *
4737  * After getting the input address, the function then writes the appropriate
4738  * data to the analog switch, and housekeeps the local copy of the switch
4739  * information.
4740  */
4741 static void gv800s_muxsel(struct bttv *btv, unsigned int input)
4742 {
4743         struct bttv *mctlr;
4744         char *sw_status;
4745         int xaddr, yaddr;
4746         static unsigned int map[4][4] = { { 0x0, 0x4, 0xa, 0x6 },
4747                                           { 0x1, 0x5, 0xb, 0x7 },
4748                                           { 0x2, 0x8, 0xc, 0xe },
4749                                           { 0x3, 0x9, 0xd, 0xf } };
4750         input = input%4;
4751         mctlr = master[btv->c.nr];
4752         if (mctlr == NULL) {
4753                 /* do nothing until the "master" is detected */
4754                 return;
4755         }
4756         yaddr = (btv->c.nr - mctlr->c.nr) & 3;
4757         sw_status = (char *)(&mctlr->mbox_we);
4758         xaddr = map[yaddr][input] & 0xf;
4759
4760         /* Check if the controller/camera pair has changed, ignore otherwise */
4761         if (sw_status[yaddr] != xaddr) {
4762                 /* disable the old switch, enable the new one and save status */
4763                 gv800s_write(mctlr, sw_status[yaddr], yaddr, 0);
4764                 sw_status[yaddr] = xaddr;
4765                 gv800s_write(mctlr, xaddr, yaddr, 1);
4766         }
4767 }
4768
4769 /* GeoVision GV-800(S) "master" chip init */
4770 static void gv800s_init(struct bttv *btv)
4771 {
4772         char *sw_status = (char *)(&btv->mbox_we);
4773         int ix;
4774
4775         gpio_inout(0xf107f, 0xf107f);
4776         gpio_write(1<<19); /* reset the analog MUX */
4777         gpio_write(0);
4778
4779         /* Preset camera 0 to the 4 controllers */
4780         for (ix = 0; ix < 4; ix++) {
4781                 sw_status[ix] = ix;
4782                 gv800s_write(btv, ix, ix, 1);
4783         }
4784
4785         /* Inputs on the "master" controller need this brightness fix */
4786         bttv_I2CWrite(btv, 0x18, 0x5, 0x90, 1);
4787
4788         if (btv->c.nr > BTTV_MAX-4)
4789                 return;
4790         /*
4791          * Store the "master" controller pointer in the master
4792          * array for later use in the muxsel function.
4793          */
4794         master[btv->c.nr]   = btv;
4795         master[btv->c.nr+1] = btv;
4796         master[btv->c.nr+2] = btv;
4797         master[btv->c.nr+3] = btv;
4798 }
4799
4800 /* ----------------------------------------------------------------------- */
4801 /* motherboard chipset specific stuff                                      */
4802
4803 void __init bttv_check_chipset(void)
4804 {
4805         int pcipci_fail = 0;
4806         struct pci_dev *dev = NULL;
4807
4808         if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL))       /* should check if target is AGP */
4809                 pcipci_fail = 1;
4810         if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF))
4811                 triton1 = 1;
4812         if (pci_pci_problems & PCIPCI_VSFX)
4813                 vsfx = 1;
4814 #ifdef PCIPCI_ALIMAGIK
4815         if (pci_pci_problems & PCIPCI_ALIMAGIK)
4816                 latency = 0x0A;
4817 #endif
4818
4819
4820         /* print warnings about any quirks found */
4821         if (triton1)
4822                 pr_info("Host bridge needs ETBF enabled\n");
4823         if (vsfx)
4824                 pr_info("Host bridge needs VSFX enabled\n");
4825         if (pcipci_fail) {
4826                 pr_info("bttv and your chipset may not work together\n");
4827                 if (!no_overlay) {
4828                         pr_info("overlay will be disabled\n");
4829                         no_overlay = 1;
4830                 } else {
4831                         pr_info("overlay forced. Use this option at your own risk.\n");
4832                 }
4833         }
4834         if (UNSET != latency)
4835                 pr_info("pci latency fixup [%d]\n", latency);
4836         while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL,
4837                                       PCI_DEVICE_ID_INTEL_82441, dev))) {
4838                 unsigned char b;
4839                 pci_read_config_byte(dev, 0x53, &b);
4840                 if (bttv_debug)
4841                         pr_info("Host bridge: 82441FX Natoma, bufcon=0x%02x\n",
4842                                 b);
4843         }
4844 }
4845
4846 int __devinit bttv_handle_chipset(struct bttv *btv)
4847 {
4848         unsigned char command;
4849
4850         if (!triton1 && !vsfx && UNSET == latency)
4851                 return 0;
4852
4853         if (bttv_verbose) {
4854                 if (triton1)
4855                         pr_info("%d: enabling ETBF (430FX/VP3 compatibility)\n",
4856                                 btv->c.nr);
4857                 if (vsfx && btv->id >= 878)
4858                         pr_info("%d: enabling VSFX\n", btv->c.nr);
4859                 if (UNSET != latency)
4860                         pr_info("%d: setting pci timer to %d\n",
4861                                 btv->c.nr, latency);
4862         }
4863
4864         if (btv->id < 878) {
4865                 /* bt848 (mis)uses a bit in the irq mask for etbf */
4866                 if (triton1)
4867                         btv->triton1 = BT848_INT_ETBF;
4868         } else {
4869                 /* bt878 has a bit in the pci config space for it */
4870                 pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command);
4871                 if (triton1)
4872                         command |= BT878_EN_TBFX;
4873                 if (vsfx)
4874                         command |= BT878_EN_VSFX;
4875                 pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command);
4876         }
4877         if (UNSET != latency)
4878                 pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency);
4879         return 0;
4880 }
4881
4882
4883 /*
4884  * Local variables:
4885  * c-basic-offset: 8
4886  * End:
4887  */