2 # Touchscreen driver configuration
4 menuconfig INPUT_TOUCHSCREEN
7 Say Y here, and a list of supported touchscreens will be displayed.
8 This option doesn't affect the kernel.
16 depends on INPUT && OF
18 config TOUCHSCREEN_88PM860X
19 tristate "Marvell 88PM860x touchscreen"
20 depends on MFD_88PM860X
22 Say Y here if you have a 88PM860x PMIC and want to enable
23 support for the built-in touchscreen.
27 To compile this driver as a module, choose M here: the
28 module will be called 88pm860x-ts.
30 config TOUCHSCREEN_ADS7846
31 tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
33 depends on HWMON = n || HWMON
35 Say Y here if you have a touchscreen interface using the
36 ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
37 and your board-specific setup code includes that in its
40 If HWMON is selected, and the driver is told the reference voltage
41 on your board, you will also get hwmon interfaces for the voltage
42 (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.
44 If unsure, say N (but it's safe to say "Y").
46 To compile this driver as a module, choose M here: the
47 module will be called ads7846.
49 config TOUCHSCREEN_AD7877
50 tristate "AD7877 based touchscreens"
53 Say Y here if you have a touchscreen interface using the
54 AD7877 controller, and your board-specific initialization
55 code includes that in its table of SPI devices.
57 If unsure, say N (but it's safe to say "Y").
59 To compile this driver as a module, choose M here: the
60 module will be called ad7877.
62 config TOUCHSCREEN_AD7879
63 tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
65 Say Y here if you want to support a touchscreen interface using
66 the AD7879-1/AD7889-1 controller.
68 You should select a bus connection too.
70 To compile this driver as a module, choose M here: the
71 module will be called ad7879.
73 config TOUCHSCREEN_AD7879_I2C
74 tristate "support I2C bus connection"
75 depends on TOUCHSCREEN_AD7879 && I2C
77 Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
79 To compile this driver as a module, choose M here: the
80 module will be called ad7879-i2c.
82 config TOUCHSCREEN_AD7879_SPI
83 tristate "support SPI bus connection"
84 depends on TOUCHSCREEN_AD7879 && SPI_MASTER
86 Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
88 If unsure, say N (but it's safe to say "Y").
90 To compile this driver as a module, choose M here: the
91 module will be called ad7879-spi.
93 config TOUCHSCREEN_AR1021_I2C
94 tristate "Microchip AR1021 i2c touchscreen"
97 Say Y here if you have the Microchip AR1021 touchscreen controller
102 To compile this driver as a module, choose M here: the
103 module will be called ar1021_i2c.
105 config TOUCHSCREEN_ATMEL_MXT
106 tristate "Atmel mXT I2C Touchscreen"
110 Say Y here if you have Atmel mXT series I2C touchscreen,
111 such as AT42QT602240/ATMXT224, connected to your system.
115 To compile this driver as a module, choose M here: the
116 module will be called atmel_mxt_ts.
118 config TOUCHSCREEN_AUO_PIXCIR
119 tristate "AUO in-cell touchscreen using Pixcir ICs"
123 Say Y here if you have a AUO display with in-cell touchscreen
128 To compile this driver as a module, choose M here: the
129 module will be called auo-pixcir-ts.
131 config TOUCHSCREEN_BU21013
132 tristate "BU21013 based touch panel controllers"
135 Say Y here if you have a bu21013 touchscreen connected to
140 To compile this driver as a module, choose M here: the
141 module will be called bu21013_ts.
143 config TOUCHSCREEN_CY8CTMG110
144 tristate "cy8ctmg110 touchscreen"
148 Say Y here if you have a cy8ctmg110 capacitive touchscreen on
153 To compile this driver as a module, choose M here: the
154 module will be called cy8ctmg110_ts.
156 config TOUCHSCREEN_CYTTSP_CORE
157 tristate "Cypress TTSP touchscreen"
159 Say Y here if you have a touchscreen using controller from
160 the Cypress TrueTouch(tm) Standard Product family connected
161 to your system. You will also need to select appropriate
162 bus connection below.
166 To compile this driver as a module, choose M here: the
167 module will be called cyttsp_core.
169 config TOUCHSCREEN_CYTTSP_I2C
170 tristate "support I2C bus connection"
171 depends on TOUCHSCREEN_CYTTSP_CORE && I2C
173 Say Y here if the touchscreen is connected via I2C bus.
175 To compile this driver as a module, choose M here: the
176 module will be called cyttsp_i2c.
178 config TOUCHSCREEN_CYTTSP_SPI
179 tristate "support SPI bus connection"
180 depends on TOUCHSCREEN_CYTTSP_CORE && SPI_MASTER
182 Say Y here if the touchscreen is connected via SPI bus.
184 To compile this driver as a module, choose M here: the
185 module will be called cyttsp_spi.
187 config TOUCHSCREEN_CYTTSP4_CORE
188 tristate "Cypress TrueTouch Gen4 Touchscreen Driver"
190 Core driver for Cypress TrueTouch(tm) Standard Product
191 Generation4 touchscreen controllers.
193 Say Y here if you have a Cypress Gen4 touchscreen.
197 To compile this driver as a module, choose M here.
199 config TOUCHSCREEN_CYTTSP4_I2C
200 tristate "support I2C bus connection"
201 depends on TOUCHSCREEN_CYTTSP4_CORE && I2C
203 Say Y here if the touchscreen is connected via I2C bus.
205 To compile this driver as a module, choose M here: the
206 module will be called cyttsp4_i2c.
208 config TOUCHSCREEN_CYTTSP4_SPI
209 tristate "support SPI bus connection"
210 depends on TOUCHSCREEN_CYTTSP4_CORE && SPI_MASTER
212 Say Y here if the touchscreen is connected via SPI bus.
214 To compile this driver as a module, choose M here: the
215 module will be called cyttsp4_spi.
217 config TOUCHSCREEN_DA9034
218 tristate "Touchscreen support for Dialog Semiconductor DA9034"
219 depends on PMIC_DA903X
222 Say Y here to enable the support for the touchscreen found
223 on Dialog Semiconductor DA9034 PMIC.
227 To compile this driver as a module, choose M here: the
228 module will be called da9034-ts.
230 config TOUCHSCREEN_DA9052
231 tristate "Dialog DA9052/DA9053 TSI"
232 depends on PMIC_DA9052
234 Say Y here to support the touchscreen found on Dialog Semiconductor
235 DA9052-BC and DA9053-AA/Bx PMICs.
239 To compile this driver as a module, choose M here: the
240 module will be called da9052_tsi.
242 config TOUCHSCREEN_DYNAPRO
243 tristate "Dynapro serial touchscreen"
246 Say Y here if you have a Dynapro serial touchscreen connected to
251 To compile this driver as a module, choose M here: the
252 module will be called dynapro.
254 config TOUCHSCREEN_HAMPSHIRE
255 tristate "Hampshire serial touchscreen"
258 Say Y here if you have a Hampshire serial touchscreen connected to
263 To compile this driver as a module, choose M here: the
264 module will be called hampshire.
266 config TOUCHSCREEN_EETI
267 tristate "EETI touchscreen panel support"
270 Say Y here to enable support for I2C connected EETI touch panels.
272 To compile this driver as a module, choose M here: the
273 module will be called eeti_ts.
275 config TOUCHSCREEN_EGALAX
276 tristate "EETI eGalax multi-touch panel support"
279 Say Y here to enable support for I2C connected EETI
280 eGalax multi-touch panels.
282 To compile this driver as a module, choose M here: the
283 module will be called egalax_ts.
285 config TOUCHSCREEN_FUJITSU
286 tristate "Fujitsu serial touchscreen"
289 Say Y here if you have the Fujitsu touchscreen (such as one
290 installed in Lifebook P series laptop) connected to your
295 To compile this driver as a module, choose M here: the
296 module will be called fujitsu-ts.
298 config TOUCHSCREEN_GOODIX
299 tristate "Goodix I2C touchscreen"
302 Say Y here if you have the Goodix touchscreen (such as one
303 installed in Onda v975w tablets) connected to your
304 system. It also supports 5-finger chip models, which can be
305 found on ARM tablets, like Wexler TAB7200 and MSI Primo73.
309 To compile this driver as a module, choose M here: the
310 module will be called goodix.
312 config TOUCHSCREEN_ILI210X
313 tristate "Ilitek ILI210X based touchscreen"
316 Say Y here if you have a ILI210X based touchscreen
317 controller. This driver supports models ILI2102,
318 ILI2102s, ILI2103, ILI2103s and ILI2105.
319 Such kind of chipsets can be found in Amazon Kindle Fire
324 To compile this driver as a module, choose M here: the
325 module will be called ili210x.
327 config TOUCHSCREEN_S3C2410
328 tristate "Samsung S3C2410/generic touchscreen input driver"
329 depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
332 Say Y here if you have the s3c2410 touchscreen.
336 To compile this driver as a module, choose M here: the
337 module will be called s3c2410_ts.
339 config TOUCHSCREEN_GUNZE
340 tristate "Gunze AHL-51S touchscreen"
343 Say Y here if you have the Gunze AHL-51 touchscreen connected to
348 To compile this driver as a module, choose M here: the
349 module will be called gunze.
351 config TOUCHSCREEN_ELAN
352 tristate "Elan eKTH I2C touchscreen"
355 Say Y here if you have an Elan eKTH I2C touchscreen
356 connected to your system.
360 To compile this driver as a module, choose M here: the
361 module will be called elants_i2c.
363 config TOUCHSCREEN_ELO
364 tristate "Elo serial touchscreens"
367 Say Y here if you have an Elo serial touchscreen connected to
372 To compile this driver as a module, choose M here: the
373 module will be called elo.
375 config TOUCHSCREEN_WACOM_W8001
376 tristate "Wacom W8001 penabled serial touchscreen"
379 Say Y here if you have an Wacom W8001 penabled serial touchscreen
380 connected to your system.
384 To compile this driver as a module, choose M here: the
385 module will be called wacom_w8001.
387 config TOUCHSCREEN_WACOM_I2C
388 tristate "Wacom Tablet support (I2C)"
391 Say Y here if you want to use the I2C version of the Wacom
396 To compile this driver as a module, choose M here: the module
397 will be called wacom_i2c.
399 config TOUCHSCREEN_LPC32XX
400 tristate "LPC32XX touchscreen controller"
401 depends on ARCH_LPC32XX
403 Say Y here if you have a LPC32XX device and want
404 to support the built-in touchscreen.
406 To compile this driver as a module, choose M here: the
407 module will be called lpc32xx_ts.
409 config TOUCHSCREEN_MAX11801
410 tristate "MAX11801 based touchscreens"
413 Say Y here if you have a MAX11801 based touchscreen
418 To compile this driver as a module, choose M here: the
419 module will be called max11801_ts.
421 config TOUCHSCREEN_MCS5000
422 tristate "MELFAS MCS-5000 touchscreen"
425 Say Y here if you have the MELFAS MCS-5000 touchscreen controller
430 To compile this driver as a module, choose M here: the
431 module will be called mcs5000_ts.
433 config TOUCHSCREEN_MMS114
434 tristate "MELFAS MMS114 touchscreen"
437 Say Y here if you have the MELFAS MMS114 touchscreen controller
442 To compile this driver as a module, choose M here: the
443 module will be called mms114.
445 config TOUCHSCREEN_MTOUCH
446 tristate "MicroTouch serial touchscreens"
449 Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
454 To compile this driver as a module, choose M here: the
455 module will be called mtouch.
457 config TOUCHSCREEN_INEXIO
458 tristate "iNexio serial touchscreens"
461 Say Y here if you have an iNexio serial touchscreen connected to
466 To compile this driver as a module, choose M here: the
467 module will be called inexio.
469 config TOUCHSCREEN_INTEL_MID
470 tristate "Intel MID platform resistive touchscreen"
471 depends on INTEL_SCU_IPC
473 Say Y here if you have a Intel MID based touchscreen in
478 To compile this driver as a module, choose M here: the
479 module will be called intel_mid_touch.
481 config TOUCHSCREEN_MK712
482 tristate "ICS MicroClock MK712 touchscreen"
484 Say Y here if you have the ICS MicroClock MK712 touchscreen
485 controller chip in your system.
489 To compile this driver as a module, choose M here: the
490 module will be called mk712.
492 config TOUCHSCREEN_HP600
493 tristate "HP Jornada 6xx touchscreen"
494 depends on SH_HP6XX && SH_ADC
496 Say Y here if you have a HP Jornada 620/660/680/690 and want to
497 support the built-in touchscreen.
499 To compile this driver as a module, choose M here: the
500 module will be called hp680_ts_input.
502 config TOUCHSCREEN_HP7XX
503 tristate "HP Jornada 7xx touchscreen"
504 depends on SA1100_JORNADA720_SSP
506 Say Y here if you have a HP Jornada 710/720/728 and want
507 to support the built-in touchscreen.
509 To compile this driver as a module, choose M here: the
510 module will be called jornada720_ts.
512 config TOUCHSCREEN_IPAQ_MICRO
513 tristate "HP iPAQ Atmel Micro ASIC touchscreen"
514 depends on MFD_IPAQ_MICRO
516 Say Y here to enable support for the touchscreen attached to
517 the Atmel Micro peripheral controller on iPAQ h3100/h3600/h3700
521 To compile this driver as a module, choose M here: the
522 module will be called ipaq-micro-ts.
524 config TOUCHSCREEN_HTCPEN
525 tristate "HTC Shift X9500 touchscreen"
528 Say Y here if you have an HTC Shift UMPC also known as HTC X9500
529 Clio / Shangrila and want to support the built-in touchscreen.
533 To compile this driver as a module, choose M here: the
534 module will be called htcpen.
536 config TOUCHSCREEN_PENMOUNT
537 tristate "Penmount serial touchscreen"
540 Say Y here if you have a Penmount serial touchscreen connected to
545 To compile this driver as a module, choose M here: the
546 module will be called penmount.
548 config TOUCHSCREEN_EDT_FT5X06
549 tristate "EDT FocalTech FT5x06 I2C Touchscreen support"
552 Say Y here if you have an EDT "Polytouch" touchscreen based
553 on the FocalTech FT5x06 family of controllers connected to
558 To compile this driver as a module, choose M here: the
559 module will be called edt-ft5x06.
561 config TOUCHSCREEN_MIGOR
562 tristate "Renesas MIGO-R touchscreen"
563 depends on SH_MIGOR && I2C
565 Say Y here to enable MIGO-R touchscreen support.
569 To compile this driver as a module, choose M here: the
570 module will be called migor_ts.
572 config TOUCHSCREEN_TOUCHRIGHT
573 tristate "Touchright serial touchscreen"
576 Say Y here if you have a Touchright serial touchscreen connected to
581 To compile this driver as a module, choose M here: the
582 module will be called touchright.
584 config TOUCHSCREEN_TOUCHWIN
585 tristate "Touchwin serial touchscreen"
588 Say Y here if you have a Touchwin serial touchscreen connected to
593 To compile this driver as a module, choose M here: the
594 module will be called touchwin.
596 config TOUCHSCREEN_TI_AM335X_TSC
597 tristate "TI Touchscreen Interface"
598 depends on MFD_TI_AM335X_TSCADC
600 Say Y here if you have 4/5/8 wire touchscreen controller
601 to be connected to the ADC controller on your TI AM335x SoC.
605 To compile this driver as a module, choose M here: the
606 module will be called ti_am335x_tsc.
608 config TOUCHSCREEN_UCB1400
609 tristate "Philips UCB1400 touchscreen"
611 depends on UCB1400_CORE
613 This enables support for the Philips UCB1400 touchscreen interface.
614 The UCB1400 is an AC97 audio codec. The touchscreen interface
615 will be initialized only after the ALSA subsystem has been
616 brought up and the UCB1400 detected. You therefore have to
617 configure ALSA support as well (either built-in or modular,
618 independently of whether this driver is itself built-in or
619 modular) for this driver to work.
621 To compile this driver as a module, choose M here: the
622 module will be called ucb1400_ts.
624 config TOUCHSCREEN_PIXCIR
625 tristate "PIXCIR I2C touchscreens"
628 Say Y here if you have a pixcir i2c touchscreen
633 To compile this driver as a module, choose M here: the
634 module will be called pixcir_i2c_ts.
636 config TOUCHSCREEN_WM831X
637 tristate "Support for WM831x touchscreen controllers"
638 depends on MFD_WM831X
640 This enables support for the touchscreen controller on the WM831x
643 To compile this driver as a module, choose M here: the
644 module will be called wm831x-ts.
646 config TOUCHSCREEN_WM97XX
647 tristate "Support for WM97xx AC97 touchscreen controllers"
650 Say Y here if you have a Wolfson Microelectronics WM97xx
651 touchscreen connected to your system. Note that this option
652 only enables core driver, you will also need to select
653 support for appropriate chip below.
657 To compile this driver as a module, choose M here: the
658 module will be called wm97xx-ts.
660 config TOUCHSCREEN_WM9705
661 bool "WM9705 Touchscreen interface support"
662 depends on TOUCHSCREEN_WM97XX
665 Say Y here to enable support for the Wolfson Microelectronics
666 WM9705 touchscreen controller.
668 config TOUCHSCREEN_WM9712
669 bool "WM9712 Touchscreen interface support"
670 depends on TOUCHSCREEN_WM97XX
673 Say Y here to enable support for the Wolfson Microelectronics
674 WM9712 touchscreen controller.
676 config TOUCHSCREEN_WM9713
677 bool "WM9713 Touchscreen interface support"
678 depends on TOUCHSCREEN_WM97XX
681 Say Y here to enable support for the Wolfson Microelectronics
682 WM9713 touchscreen controller.
684 config TOUCHSCREEN_WM97XX_ATMEL
685 tristate "WM97xx Atmel accelerated touch"
686 depends on TOUCHSCREEN_WM97XX && AVR32
688 Say Y here for support for streaming mode with WM97xx touchscreens
689 on Atmel AT91 or AVR32 systems with an AC97C module.
691 Be aware that this will use channel B in the controller for
692 streaming data, this must not conflict with other AC97C drivers.
696 To compile this driver as a module, choose M here: the module will
697 be called atmel-wm97xx.
699 config TOUCHSCREEN_WM97XX_MAINSTONE
700 tristate "WM97xx Mainstone/Palm accelerated touch"
701 depends on TOUCHSCREEN_WM97XX && ARCH_PXA
703 Say Y here for support for streaming mode with WM97xx touchscreens
704 on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
708 To compile this driver as a module, choose M here: the
709 module will be called mainstone-wm97xx.
711 config TOUCHSCREEN_WM97XX_ZYLONITE
712 tristate "Zylonite accelerated touch"
713 depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
714 select TOUCHSCREEN_WM9713
716 Say Y here for support for streaming mode with the touchscreen
721 To compile this driver as a module, choose M here: the
722 module will be called zylonite-wm97xx.
724 config TOUCHSCREEN_USB_COMPOSITE
725 tristate "USB Touchscreen Driver"
726 depends on USB_ARCH_HAS_HCD
729 USB Touchscreen driver for:
730 - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
731 - PanJit TouchSet USB
732 - 3M MicroTouch USB (EX II series)
734 - some other eTurboTouch
737 - IRTOUCHSYSTEMS/UNITOP
739 - GoTop Super_Q2/GogoPen/PenPower tablets
740 - JASTEC USB Touch Controller/DigiTech DTR-02U
741 - Zytronic controllers
742 - Elo TouchSystems 2700 IntelliTouch
743 - EasyTouch USB Touch Controller from Data Modul
744 - e2i (Mimo monitors)
746 Have a look at <http://linux.chapter7.ch/touchkit/> for
747 a usage description and the required user-space stuff.
749 To compile this driver as a module, choose M here: the
750 module will be called usbtouchscreen.
752 config TOUCHSCREEN_MC13783
753 tristate "Freescale MC13783 touchscreen input driver"
754 depends on MFD_MC13XXX
756 Say Y here if you have an Freescale MC13783 PMIC on your
757 board and want to use its touchscreen
761 To compile this driver as a module, choose M here: the
762 module will be called mc13783_ts.
764 config TOUCHSCREEN_USB_EGALAX
766 bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT
767 depends on TOUCHSCREEN_USB_COMPOSITE
769 config TOUCHSCREEN_USB_PANJIT
771 bool "PanJit device support" if EXPERT
772 depends on TOUCHSCREEN_USB_COMPOSITE
774 config TOUCHSCREEN_USB_3M
776 bool "3M/Microtouch EX II series device support" if EXPERT
777 depends on TOUCHSCREEN_USB_COMPOSITE
779 config TOUCHSCREEN_USB_ITM
781 bool "ITM device support" if EXPERT
782 depends on TOUCHSCREEN_USB_COMPOSITE
784 config TOUCHSCREEN_USB_ETURBO
786 bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT
787 depends on TOUCHSCREEN_USB_COMPOSITE
789 config TOUCHSCREEN_USB_GUNZE
791 bool "Gunze AHL61 device support" if EXPERT
792 depends on TOUCHSCREEN_USB_COMPOSITE
794 config TOUCHSCREEN_USB_DMC_TSC10
796 bool "DMC TSC-10/25 device support" if EXPERT
797 depends on TOUCHSCREEN_USB_COMPOSITE
799 config TOUCHSCREEN_USB_IRTOUCH
801 bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT
802 depends on TOUCHSCREEN_USB_COMPOSITE
804 config TOUCHSCREEN_USB_IDEALTEK
806 bool "IdealTEK URTC1000 device support" if EXPERT
807 depends on TOUCHSCREEN_USB_COMPOSITE
809 config TOUCHSCREEN_USB_GENERAL_TOUCH
811 bool "GeneralTouch Touchscreen device support" if EXPERT
812 depends on TOUCHSCREEN_USB_COMPOSITE
814 config TOUCHSCREEN_USB_GOTOP
816 bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT
817 depends on TOUCHSCREEN_USB_COMPOSITE
819 config TOUCHSCREEN_USB_JASTEC
821 bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
822 depends on TOUCHSCREEN_USB_COMPOSITE
824 config TOUCHSCREEN_USB_ELO
826 bool "Elo TouchSystems 2700 IntelliTouch controller device support" if EXPERT
827 depends on TOUCHSCREEN_USB_COMPOSITE
829 config TOUCHSCREEN_USB_E2I
831 bool "e2i Touchscreen controller (e.g. from Mimo 740)" if EXPERT
832 depends on TOUCHSCREEN_USB_COMPOSITE
834 config TOUCHSCREEN_USB_ZYTRONIC
836 bool "Zytronic controller" if EXPERT
837 depends on TOUCHSCREEN_USB_COMPOSITE
839 config TOUCHSCREEN_USB_ETT_TC45USB
841 bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT
842 depends on TOUCHSCREEN_USB_COMPOSITE
844 config TOUCHSCREEN_USB_NEXIO
846 bool "NEXIO/iNexio device support" if EXPERT
847 depends on TOUCHSCREEN_USB_COMPOSITE
849 config TOUCHSCREEN_USB_EASYTOUCH
851 bool "EasyTouch USB Touch controller device support" if EMBEDDED
852 depends on TOUCHSCREEN_USB_COMPOSITE
854 Say Y here if you have an EasyTouch USB Touch controller.
857 config TOUCHSCREEN_TOUCHIT213
858 tristate "Sahara TouchIT-213 touchscreen"
861 Say Y here if you have a Sahara TouchIT-213 Tablet PC.
865 To compile this driver as a module, choose M here: the
866 module will be called touchit213.
868 config TOUCHSCREEN_TSC_SERIO
869 tristate "TSC-10/25/40 serial touchscreen support"
872 Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
877 To compile this driver as a module, choose M here: the
878 module will be called tsc40.
880 config TOUCHSCREEN_TSC2005
881 tristate "TSC2005 based touchscreens"
882 depends on SPI_MASTER
884 Say Y here if you have a TSC2005 based touchscreen.
888 To compile this driver as a module, choose M here: the
889 module will be called tsc2005.
891 config TOUCHSCREEN_TSC2007
892 tristate "TSC2007 based touchscreens"
895 Say Y here if you have a TSC2007 based touchscreen.
899 To compile this driver as a module, choose M here: the
900 module will be called tsc2007.
902 config TOUCHSCREEN_W90X900
903 tristate "W90P910 touchscreen driver"
904 depends on ARCH_W90X900
906 Say Y here if you have a W90P910 based touchscreen.
908 To compile this driver as a module, choose M here: the
909 module will be called w90p910_ts.
911 config TOUCHSCREEN_PCAP
912 tristate "Motorola PCAP touchscreen"
915 Say Y here if you have a Motorola EZX telephone and
916 want to enable support for the built-in touchscreen.
918 To compile this driver as a module, choose M here: the
919 module will be called pcap_ts.
921 config TOUCHSCREEN_ST1232
922 tristate "Sitronix ST1232 touchscreen controllers"
925 Say Y here if you want to support Sitronix ST1232
926 touchscreen controller.
930 To compile this driver as a module, choose M here: the
931 module will be called st1232_ts.
933 config TOUCHSCREEN_STMPE
934 tristate "STMicroelectronics STMPE touchscreens"
937 Say Y here if you want support for STMicroelectronics
938 STMPE touchscreen controllers.
940 To compile this driver as a module, choose M here: the
941 module will be called stmpe-ts.
943 config TOUCHSCREEN_SUN4I
944 tristate "Allwinner sun4i resistive touchscreen controller support"
945 depends on ARCH_SUNXI || COMPILE_TEST
947 depends on THERMAL || !THERMAL_OF
949 This selects support for the resistive touchscreen controller
950 found on Allwinner sunxi SoCs.
952 To compile this driver as a module, choose M here: the
953 module will be called sun4i-ts.
955 config TOUCHSCREEN_SUR40
956 tristate "Samsung SUR40 (Surface 2.0/PixelSense) touchscreen"
960 Say Y here if you want support for the Samsung SUR40 touchscreen
961 (also known as Microsoft Surface 2.0 or Microsoft PixelSense).
963 To compile this driver as a module, choose M here: the
964 module will be called sur40.
966 config TOUCHSCREEN_SX8654
967 tristate "Semtech SX8654 touchscreen"
970 Say Y here if you have a Semtech SX8654 touchscreen controller.
974 To compile this driver as a module, choose M here: the
975 module will be called sx8654.
977 config TOUCHSCREEN_TPS6507X
978 tristate "TPS6507x based touchscreens"
982 Say Y here if you have a TPS6507x based touchscreen
987 To compile this driver as a module, choose M here: the
988 module will be called tps6507x_ts.
990 config TOUCHSCREEN_ZFORCE
991 tristate "Neonode zForce infrared touchscreens"
995 Say Y here if you have a touchscreen using the zforce
996 infraread technology from Neonode.
1000 To compile this driver as a module, choose M here: the
1001 module will be called zforce_ts.