thermal: rockchip: add temperature dump when panic
[firefly-linux-kernel-4.4.55.git] / drivers / ata / pata_cmd64x.c
1 /*
2  * pata_cmd64x.c        - CMD64x PATA for new ATA layer
3  *                        (C) 2005 Red Hat Inc
4  *                        Alan Cox <alan@lxorguk.ukuu.org.uk>
5  *                        (C) 2009-2010 Bartlomiej Zolnierkiewicz
6  *                        (C) 2012 MontaVista Software, LLC <source@mvista.com>
7  *
8  * Based upon
9  * linux/drivers/ide/pci/cmd64x.c               Version 1.30    Sept 10, 2002
10  *
11  * cmd64x.c: Enable interrupts at initialization time on Ultra/PCI machines.
12  *           Note, this driver is not used at all on other systems because
13  *           there the "BIOS" has done all of the following already.
14  *           Due to massive hardware bugs, UltraDMA is only supported
15  *           on the 646U2 and not on the 646U.
16  *
17  * Copyright (C) 1998           Eddie C. Dost  (ecd@skynet.be)
18  * Copyright (C) 1998           David S. Miller (davem@redhat.com)
19  *
20  * Copyright (C) 1999-2002      Andre Hedrick <andre@linux-ide.org>
21  *
22  * TODO
23  *      Testing work
24  */
25
26 #include <linux/kernel.h>
27 #include <linux/module.h>
28 #include <linux/pci.h>
29 #include <linux/blkdev.h>
30 #include <linux/delay.h>
31 #include <scsi/scsi_host.h>
32 #include <linux/libata.h>
33
34 #define DRV_NAME "pata_cmd64x"
35 #define DRV_VERSION "0.2.18"
36
37 /*
38  * CMD64x specific registers definition.
39  */
40
41 enum {
42         CFR             = 0x50,
43                 CFR_INTR_CH0  = 0x04,
44         CNTRL           = 0x51,
45                 CNTRL_CH0     = 0x04,
46                 CNTRL_CH1     = 0x08,
47         CMDTIM          = 0x52,
48         ARTTIM0         = 0x53,
49         DRWTIM0         = 0x54,
50         ARTTIM1         = 0x55,
51         DRWTIM1         = 0x56,
52         ARTTIM23        = 0x57,
53                 ARTTIM23_DIS_RA2  = 0x04,
54                 ARTTIM23_DIS_RA3  = 0x08,
55                 ARTTIM23_INTR_CH1 = 0x10,
56         DRWTIM2         = 0x58,
57         BRST            = 0x59,
58         DRWTIM3         = 0x5b,
59         BMIDECR0        = 0x70,
60         MRDMODE         = 0x71,
61                 MRDMODE_INTR_CH0 = 0x04,
62                 MRDMODE_INTR_CH1 = 0x08,
63         BMIDESR0        = 0x72,
64         UDIDETCR0       = 0x73,
65         DTPR0           = 0x74,
66         BMIDECR1        = 0x78,
67         BMIDECSR        = 0x79,
68         UDIDETCR1       = 0x7B,
69         DTPR1           = 0x7C
70 };
71
72 static int cmd648_cable_detect(struct ata_port *ap)
73 {
74         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
75         u8 r;
76
77         /* Check cable detect bits */
78         pci_read_config_byte(pdev, BMIDECSR, &r);
79         if (r & (1 << ap->port_no))
80                 return ATA_CBL_PATA80;
81         return ATA_CBL_PATA40;
82 }
83
84 /**
85  *      cmd64x_set_timing       -       set PIO and MWDMA timing
86  *      @ap: ATA interface
87  *      @adev: ATA device
88  *      @mode: mode
89  *
90  *      Called to do the PIO and MWDMA mode setup.
91  */
92
93 static void cmd64x_set_timing(struct ata_port *ap, struct ata_device *adev, u8 mode)
94 {
95         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
96         struct ata_timing t;
97         const unsigned long T = 1000000 / 33;
98         const u8 setup_data[] = { 0x40, 0x40, 0x40, 0x80, 0x00 };
99
100         u8 reg;
101
102         /* Port layout is not logical so use a table */
103         const u8 arttim_port[2][2] = {
104                 { ARTTIM0, ARTTIM1 },
105                 { ARTTIM23, ARTTIM23 }
106         };
107         const u8 drwtim_port[2][2] = {
108                 { DRWTIM0, DRWTIM1 },
109                 { DRWTIM2, DRWTIM3 }
110         };
111
112         int arttim = arttim_port[ap->port_no][adev->devno];
113         int drwtim = drwtim_port[ap->port_no][adev->devno];
114
115         /* ata_timing_compute is smart and will produce timings for MWDMA
116            that don't violate the drives PIO capabilities. */
117         if (ata_timing_compute(adev, mode, &t, T, 0) < 0) {
118                 printk(KERN_ERR DRV_NAME ": mode computation failed.\n");
119                 return;
120         }
121         if (ap->port_no) {
122                 /* Slave has shared address setup */
123                 struct ata_device *pair = ata_dev_pair(adev);
124
125                 if (pair) {
126                         struct ata_timing tp;
127                         ata_timing_compute(pair, pair->pio_mode, &tp, T, 0);
128                         ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP);
129                 }
130         }
131
132         printk(KERN_DEBUG DRV_NAME ": active %d recovery %d setup %d.\n",
133                 t.active, t.recover, t.setup);
134         if (t.recover > 16) {
135                 t.active += t.recover - 16;
136                 t.recover = 16;
137         }
138         if (t.active > 16)
139                 t.active = 16;
140
141         /* Now convert the clocks into values we can actually stuff into
142            the chip */
143
144         if (t.recover == 16)
145                 t.recover = 0;
146         else if (t.recover > 1)
147                 t.recover--;
148         else
149                 t.recover = 15;
150
151         if (t.setup > 4)
152                 t.setup = 0xC0;
153         else
154                 t.setup = setup_data[t.setup];
155
156         t.active &= 0x0F;       /* 0 = 16 */
157
158         /* Load setup timing */
159         pci_read_config_byte(pdev, arttim, &reg);
160         reg &= 0x3F;
161         reg |= t.setup;
162         pci_write_config_byte(pdev, arttim, reg);
163
164         /* Load active/recovery */
165         pci_write_config_byte(pdev, drwtim, (t.active << 4) | t.recover);
166 }
167
168 /**
169  *      cmd64x_set_piomode      -       set initial PIO mode data
170  *      @ap: ATA interface
171  *      @adev: ATA device
172  *
173  *      Used when configuring the devices ot set the PIO timings. All the
174  *      actual work is done by the PIO/MWDMA setting helper
175  */
176
177 static void cmd64x_set_piomode(struct ata_port *ap, struct ata_device *adev)
178 {
179         cmd64x_set_timing(ap, adev, adev->pio_mode);
180 }
181
182 /**
183  *      cmd64x_set_dmamode      -       set initial DMA mode data
184  *      @ap: ATA interface
185  *      @adev: ATA device
186  *
187  *      Called to do the DMA mode setup.
188  */
189
190 static void cmd64x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
191 {
192         static const u8 udma_data[] = {
193                 0x30, 0x20, 0x10, 0x20, 0x10, 0x00
194         };
195
196         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
197         u8 regU, regD;
198
199         int pciU = UDIDETCR0 + 8 * ap->port_no;
200         int pciD = BMIDESR0 + 8 * ap->port_no;
201         int shift = 2 * adev->devno;
202
203         pci_read_config_byte(pdev, pciD, &regD);
204         pci_read_config_byte(pdev, pciU, &regU);
205
206         /* DMA bits off */
207         regD &= ~(0x20 << adev->devno);
208         /* DMA control bits */
209         regU &= ~(0x30 << shift);
210         /* DMA timing bits */
211         regU &= ~(0x05 << adev->devno);
212
213         if (adev->dma_mode >= XFER_UDMA_0) {
214                 /* Merge the timing value */
215                 regU |= udma_data[adev->dma_mode - XFER_UDMA_0] << shift;
216                 /* Merge the control bits */
217                 regU |= 1 << adev->devno; /* UDMA on */
218                 if (adev->dma_mode > XFER_UDMA_2) /* 15nS timing */
219                         regU |= 4 << adev->devno;
220         } else {
221                 regU &= ~ (1 << adev->devno);   /* UDMA off */
222                 cmd64x_set_timing(ap, adev, adev->dma_mode);
223         }
224
225         regD |= 0x20 << adev->devno;
226
227         pci_write_config_byte(pdev, pciU, regU);
228         pci_write_config_byte(pdev, pciD, regD);
229 }
230
231 /**
232  *      cmd64x_sff_irq_check    -       check IDE interrupt
233  *      @ap: ATA interface
234  *
235  *      Check IDE interrupt in CFR/ARTTIM23 registers.
236  */
237
238 static bool cmd64x_sff_irq_check(struct ata_port *ap)
239 {
240         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
241         int irq_mask = ap->port_no ? ARTTIM23_INTR_CH1 : CFR_INTR_CH0;
242         int irq_reg  = ap->port_no ? ARTTIM23 : CFR;
243         u8 irq_stat;
244
245         /* NOTE: reading the register should clear the interrupt */
246         pci_read_config_byte(pdev, irq_reg, &irq_stat);
247
248         return irq_stat & irq_mask;
249 }
250
251 /**
252  *      cmd64x_sff_irq_clear    -       clear IDE interrupt
253  *      @ap: ATA interface
254  *
255  *      Clear IDE interrupt in CFR/ARTTIM23 and DMA status registers.
256  */
257
258 static void cmd64x_sff_irq_clear(struct ata_port *ap)
259 {
260         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
261         int irq_reg = ap->port_no ? ARTTIM23 : CFR;
262         u8 irq_stat;
263
264         ata_bmdma_irq_clear(ap);
265
266         /* Reading the register should be enough to clear the interrupt */
267         pci_read_config_byte(pdev, irq_reg, &irq_stat);
268 }
269
270 /**
271  *      cmd648_sff_irq_check    -       check IDE interrupt
272  *      @ap: ATA interface
273  *
274  *      Check IDE interrupt in MRDMODE register.
275  */
276
277 static bool cmd648_sff_irq_check(struct ata_port *ap)
278 {
279         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
280         unsigned long base = pci_resource_start(pdev, 4);
281         int irq_mask = ap->port_no ? MRDMODE_INTR_CH1 : MRDMODE_INTR_CH0;
282         u8 mrdmode = inb(base + 1);
283
284         return mrdmode & irq_mask;
285 }
286
287 /**
288  *      cmd648_sff_irq_clear    -       clear IDE interrupt
289  *      @ap: ATA interface
290  *
291  *      Clear IDE interrupt in MRDMODE and DMA status registers.
292  */
293
294 static void cmd648_sff_irq_clear(struct ata_port *ap)
295 {
296         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
297         unsigned long base = pci_resource_start(pdev, 4);
298         int irq_mask = ap->port_no ? MRDMODE_INTR_CH1 : MRDMODE_INTR_CH0;
299         u8 mrdmode;
300
301         ata_bmdma_irq_clear(ap);
302
303         /* Clear this port's interrupt bit (leaving the other port alone) */
304         mrdmode  = inb(base + 1);
305         mrdmode &= ~(MRDMODE_INTR_CH0 | MRDMODE_INTR_CH1);
306         outb(mrdmode | irq_mask, base + 1);
307 }
308
309 /**
310  *      cmd646r1_bmdma_stop     -       DMA stop callback
311  *      @qc: Command in progress
312  *
313  *      Stub for now while investigating the r1 quirk in the old driver.
314  */
315
316 static void cmd646r1_bmdma_stop(struct ata_queued_cmd *qc)
317 {
318         ata_bmdma_stop(qc);
319 }
320
321 static struct scsi_host_template cmd64x_sht = {
322         ATA_BMDMA_SHT(DRV_NAME),
323 };
324
325 static const struct ata_port_operations cmd64x_base_ops = {
326         .inherits       = &ata_bmdma_port_ops,
327         .set_piomode    = cmd64x_set_piomode,
328         .set_dmamode    = cmd64x_set_dmamode,
329 };
330
331 static struct ata_port_operations cmd64x_port_ops = {
332         .inherits       = &cmd64x_base_ops,
333         .sff_irq_check  = cmd64x_sff_irq_check,
334         .sff_irq_clear  = cmd64x_sff_irq_clear,
335         .cable_detect   = ata_cable_40wire,
336 };
337
338 static struct ata_port_operations cmd646r1_port_ops = {
339         .inherits       = &cmd64x_base_ops,
340         .sff_irq_check  = cmd64x_sff_irq_check,
341         .sff_irq_clear  = cmd64x_sff_irq_clear,
342         .bmdma_stop     = cmd646r1_bmdma_stop,
343         .cable_detect   = ata_cable_40wire,
344 };
345
346 static struct ata_port_operations cmd646r3_port_ops = {
347         .inherits       = &cmd64x_base_ops,
348         .sff_irq_check  = cmd648_sff_irq_check,
349         .sff_irq_clear  = cmd648_sff_irq_clear,
350         .cable_detect   = ata_cable_40wire,
351 };
352
353 static struct ata_port_operations cmd648_port_ops = {
354         .inherits       = &cmd64x_base_ops,
355         .sff_irq_check  = cmd648_sff_irq_check,
356         .sff_irq_clear  = cmd648_sff_irq_clear,
357         .cable_detect   = cmd648_cable_detect,
358 };
359
360 static void cmd64x_fixup(struct pci_dev *pdev)
361 {
362         u8 mrdmode;
363
364         pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64);
365         pci_read_config_byte(pdev, MRDMODE, &mrdmode);
366         mrdmode &= ~0x30;       /* IRQ set up */
367         mrdmode |= 0x02;        /* Memory read line enable */
368         pci_write_config_byte(pdev, MRDMODE, mrdmode);
369
370         /* PPC specific fixup copied from old driver */
371 #ifdef CONFIG_PPC
372         pci_write_config_byte(pdev, UDIDETCR0, 0xF0);
373 #endif
374 }
375
376 static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
377 {
378         static const struct ata_port_info cmd_info[7] = {
379                 {       /* CMD 643 - no UDMA */
380                         .flags = ATA_FLAG_SLAVE_POSS,
381                         .pio_mask = ATA_PIO4,
382                         .mwdma_mask = ATA_MWDMA2,
383                         .port_ops = &cmd64x_port_ops
384                 },
385                 {       /* CMD 646 with broken UDMA */
386                         .flags = ATA_FLAG_SLAVE_POSS,
387                         .pio_mask = ATA_PIO4,
388                         .mwdma_mask = ATA_MWDMA2,
389                         .port_ops = &cmd64x_port_ops
390                 },
391                 {       /* CMD 646U with broken UDMA */
392                         .flags = ATA_FLAG_SLAVE_POSS,
393                         .pio_mask = ATA_PIO4,
394                         .mwdma_mask = ATA_MWDMA2,
395                         .port_ops = &cmd646r3_port_ops
396                 },
397                 {       /* CMD 646U2 with working UDMA */
398                         .flags = ATA_FLAG_SLAVE_POSS,
399                         .pio_mask = ATA_PIO4,
400                         .mwdma_mask = ATA_MWDMA2,
401                         .udma_mask = ATA_UDMA2,
402                         .port_ops = &cmd646r3_port_ops
403                 },
404                 {       /* CMD 646 rev 1  */
405                         .flags = ATA_FLAG_SLAVE_POSS,
406                         .pio_mask = ATA_PIO4,
407                         .mwdma_mask = ATA_MWDMA2,
408                         .port_ops = &cmd646r1_port_ops
409                 },
410                 {       /* CMD 648 */
411                         .flags = ATA_FLAG_SLAVE_POSS,
412                         .pio_mask = ATA_PIO4,
413                         .mwdma_mask = ATA_MWDMA2,
414                         .udma_mask = ATA_UDMA4,
415                         .port_ops = &cmd648_port_ops
416                 },
417                 {       /* CMD 649 */
418                         .flags = ATA_FLAG_SLAVE_POSS,
419                         .pio_mask = ATA_PIO4,
420                         .mwdma_mask = ATA_MWDMA2,
421                         .udma_mask = ATA_UDMA5,
422                         .port_ops = &cmd648_port_ops
423                 }
424         };
425         const struct ata_port_info *ppi[] = {
426                 &cmd_info[id->driver_data],
427                 &cmd_info[id->driver_data],
428                 NULL
429         };
430         u8 reg;
431         int rc;
432         struct pci_dev *bridge = pdev->bus->self;
433         /* mobility split bridges don't report enabled ports correctly */
434         int port_ok = !(bridge && bridge->vendor ==
435                         PCI_VENDOR_ID_MOBILITY_ELECTRONICS);
436         /* all (with exceptions below) apart from 643 have CNTRL_CH0 bit */
437         int cntrl_ch0_ok = (id->driver_data != 0);
438
439         rc = pcim_enable_device(pdev);
440         if (rc)
441                 return rc;
442
443         if (id->driver_data == 0)       /* 643 */
444                 ata_pci_bmdma_clear_simplex(pdev);
445
446         if (pdev->device == PCI_DEVICE_ID_CMD_646)
447                 switch (pdev->revision) {
448                 /* UDMA works since rev 5 */
449                 default:
450                         ppi[0] = &cmd_info[3];
451                         ppi[1] = &cmd_info[3];
452                         break;
453                 /* Interrupts in MRDMODE since rev 3 */
454                 case 3:
455                 case 4:
456                         ppi[0] = &cmd_info[2];
457                         ppi[1] = &cmd_info[2];
458                         break;
459                 /* Rev 1 with other problems? */
460                 case 1:
461                         ppi[0] = &cmd_info[4];
462                         ppi[1] = &cmd_info[4];
463                         /* FALL THRU */
464                 /* Early revs have no CNTRL_CH0 */
465                 case 2:
466                 case 0:
467                         cntrl_ch0_ok = 0;
468                         break;
469                 }
470
471         cmd64x_fixup(pdev);
472
473         /* check for enabled ports */
474         pci_read_config_byte(pdev, CNTRL, &reg);
475         if (!port_ok)
476                 dev_notice(&pdev->dev, "Mobility Bridge detected, ignoring CNTRL port enable/disable\n");
477         if (port_ok && cntrl_ch0_ok && !(reg & CNTRL_CH0)) {
478                 dev_notice(&pdev->dev, "Primary port is disabled\n");
479                 ppi[0] = &ata_dummy_port_info;
480
481         }
482         if (port_ok && !(reg & CNTRL_CH1)) {
483                 dev_notice(&pdev->dev, "Secondary port is disabled\n");
484                 ppi[1] = &ata_dummy_port_info;
485         }
486
487         return ata_pci_bmdma_init_one(pdev, ppi, &cmd64x_sht, NULL, 0);
488 }
489
490 #ifdef CONFIG_PM_SLEEP
491 static int cmd64x_reinit_one(struct pci_dev *pdev)
492 {
493         struct ata_host *host = pci_get_drvdata(pdev);
494         int rc;
495
496         rc = ata_pci_device_do_resume(pdev);
497         if (rc)
498                 return rc;
499
500         cmd64x_fixup(pdev);
501
502         ata_host_resume(host);
503         return 0;
504 }
505 #endif
506
507 static const struct pci_device_id cmd64x[] = {
508         { PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_643), 0 },
509         { PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_646), 1 },
510         { PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_648), 5 },
511         { PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_649), 6 },
512
513         { },
514 };
515
516 static struct pci_driver cmd64x_pci_driver = {
517         .name           = DRV_NAME,
518         .id_table       = cmd64x,
519         .probe          = cmd64x_init_one,
520         .remove         = ata_pci_remove_one,
521 #ifdef CONFIG_PM_SLEEP
522         .suspend        = ata_pci_device_suspend,
523         .resume         = cmd64x_reinit_one,
524 #endif
525 };
526
527 module_pci_driver(cmd64x_pci_driver);
528
529 MODULE_AUTHOR("Alan Cox");
530 MODULE_DESCRIPTION("low-level driver for CMD64x series PATA controllers");
531 MODULE_LICENSE("GPL");
532 MODULE_DEVICE_TABLE(pci, cmd64x);
533 MODULE_VERSION(DRV_VERSION);