arch/powerpc/platforms/pseries/setup.c

   1 /*
   2  *  64-bit pSeries and RS/6000 setup code.
   3  *
   4  *  Copyright (C) 1995  Linus Torvalds
   5  *  Adapted from 'alpha' version by Gary Thomas
   6  *  Modified by Cort Dougan (cort@cs.nmt.edu)
   7  *  Modified by PPC64 Team, IBM Corp
   8  *
   9  * This program is free software; you can redistribute it and/or
  10  * modify it under the terms of the GNU General Public License
  11  * as published by the Free Software Foundation; either version
  12  * 2 of the License, or (at your option) any later version.
  13  */
  14
  15 /*
  16  * bootup setup stuff..
  17  */
  18
  19 #include <linux/cpu.h>
  20 #include <linux/errno.h>
  21 #include <linux/sched.h>
  22 #include <linux/kernel.h>
  23 #include <linux/mm.h>
  24 #include <linux/stddef.h>
  25 #include <linux/unistd.h>
  26 #include <linux/user.h>
  27 #include <linux/tty.h>
  28 #include <linux/major.h>
  29 #include <linux/interrupt.h>
  30 #include <linux/reboot.h>
  31 #include <linux/init.h>
  32 #include <linux/ioport.h>
  33 #include <linux/console.h>
  34 #include <linux/pci.h>
  35 #include <linux/utsname.h>
  36 #include <linux/adb.h>
  37 #include <linux/export.h>
  38 #include <linux/delay.h>
  39 #include <linux/irq.h>
  40 #include <linux/seq_file.h>
  41 #include <linux/root_dev.h>
  42 #include <linux/cpuidle.h>
  43 #include <linux/of.h>
  44 #include <linux/kexec.h>
  45
  46 #include <asm/mmu.h>
  47 #include <asm/processor.h>
  48 #include <asm/io.h>
  49 #include <asm/pgtable.h>
  50 #include <asm/prom.h>
  51 #include <asm/rtas.h>
  52 #include <asm/pci-bridge.h>
  53 #include <asm/iommu.h>
  54 #include <asm/dma.h>
  55 #include <asm/machdep.h>
  56 #include <asm/irq.h>
  57 #include <asm/time.h>
  58 #include <asm/nvram.h>
  59 #include <asm/pmc.h>
  60 #include <asm/mpic.h>
  61 #include <asm/xics.h>
  62 #include <asm/ppc-pci.h>
  63 #include <asm/i8259.h>
  64 #include <asm/udbg.h>
  65 #include <asm/smp.h>
  66 #include <asm/firmware.h>
  67 #include <asm/eeh.h>
  68 #include <asm/reg.h>
  69
  70 #include "plpar_wrappers.h"
  71 #include "pseries.h"
  72
  73 int CMO_PrPSP = -1;
  74 int CMO_SecPSP = -1;
  75 unsigned long CMO_PageSize = (ASM_CONST(1) << IOMMU_PAGE_SHIFT);
  76 EXPORT_SYMBOL(CMO_PageSize);
  77
  78 int fwnmi_active;  /* TRUE if an FWNMI handler is present */
  79
  80 static struct device_node *pSeries_mpic_node;
  81
  82 static void pSeries_show_cpuinfo(struct seq_file *m)
  83 {
  84         struct device_node *root;
  85         const char *model = "";
  86
  87         root = of_find_node_by_path("/");
  88         if (root)
  89                 model = of_get_property(root, "model", NULL);
  90         seq_printf(m, "machine\t\t: CHRP %s\n", model);
  91         of_node_put(root);
  92 }
  93
  94 /* Initialize firmware assisted non-maskable interrupts if
  95  * the firmware supports this feature.
  96  */
  97 static void __init fwnmi_init(void)
  98 {
  99         unsigned long system_reset_addr, machine_check_addr;
 100
 101         int ibm_nmi_register = rtas_token("ibm,nmi-register");
 102         if (ibm_nmi_register == RTAS_UNKNOWN_SERVICE)
 103                 return;
 104
 105         /* If the kernel's not linked at zero we point the firmware at low
 106          * addresses anyway, and use a trampoline to get to the real code. */
 107         system_reset_addr  = __pa(system_reset_fwnmi) - PHYSICAL_START;
 108         machine_check_addr = __pa(machine_check_fwnmi) - PHYSICAL_START;
 109
 110         if (0 == rtas_call(ibm_nmi_register, 2, 1, NULL, system_reset_addr,
 111                                 machine_check_addr))
 112                 fwnmi_active = 1;
 113 }
 114
 115 static void pseries_8259_cascade(unsigned int irq, struct irq_desc *desc)
 116 {
 117         struct irq_chip *chip = irq_desc_get_chip(desc);
 118         unsigned int cascade_irq = i8259_irq();
 119
 120         if (cascade_irq != NO_IRQ)
 121                 generic_handle_irq(cascade_irq);
 122
 123         chip->irq_eoi(&desc->irq_data);
 124 }
 125
 126 static void __init pseries_setup_i8259_cascade(void)
 127 {
 128         struct device_node *np, *old, *found = NULL;
 129         unsigned int cascade;
 130         const u32 *addrp;
 131         unsigned long intack = 0;
 132         int naddr;
 133
 134         for_each_node_by_type(np, "interrupt-controller") {
 135                 if (of_device_is_compatible(np, "chrp,iic")) {
 136                         found = np;
 137                         break;
 138                 }
 139         }
 140
 141         if (found == NULL) {
 142                 printk(KERN_DEBUG "pic: no ISA interrupt controller\n");
 143                 return;
 144         }
 145
 146         cascade = irq_of_parse_and_map(found, 0);
 147         if (cascade == NO_IRQ) {
 148                 printk(KERN_ERR "pic: failed to map cascade interrupt");
 149                 return;
 150         }
 151         pr_debug("pic: cascade mapped to irq %d\n", cascade);
 152
 153         for (old = of_node_get(found); old != NULL ; old = np) {
 154                 np = of_get_parent(old);
 155                 of_node_put(old);
 156                 if (np == NULL)
 157                         break;
 158                 if (strcmp(np->name, "pci") != 0)
 159                         continue;
 160                 addrp = of_get_property(np, "8259-interrupt-acknowledge", NULL);
 161                 if (addrp == NULL)
 162                         continue;
 163                 naddr = of_n_addr_cells(np);
 164                 intack = addrp[naddr-1];
 165                 if (naddr > 1)
 166                         intack |= ((unsigned long)addrp[naddr-2]) << 32;
 167         }
 168         if (intack)
 169                 printk(KERN_DEBUG "pic: PCI 8259 intack at 0x%016lx\n", intack);
 170         i8259_init(found, intack);
 171         of_node_put(found);
 172         irq_set_chained_handler(cascade, pseries_8259_cascade);
 173 }
 174
 175 static void __init pseries_mpic_init_IRQ(void)
 176 {
 177         struct device_node *np;
 178         const unsigned int *opprop;
 179         unsigned long openpic_addr = 0;
 180         int naddr, n, i, opplen;
 181         struct mpic *mpic;
 182
 183         np = of_find_node_by_path("/");
 184         naddr = of_n_addr_cells(np);
 185         opprop = of_get_property(np, "platform-open-pic", &opplen);
 186         if (opprop != 0) {
 187                 openpic_addr = of_read_number(opprop, naddr);
 188                 printk(KERN_DEBUG "OpenPIC addr: %lx\n", openpic_addr);
 189         }
 190         of_node_put(np);
 191
 192         BUG_ON(openpic_addr == 0);
 193
 194         /* Setup the openpic driver */
 195         mpic = mpic_alloc(pSeries_mpic_node, openpic_addr,
 196                         MPIC_NO_RESET, 16, 0, " MPIC     ");
 197         BUG_ON(mpic == NULL);
 198
 199         /* Add ISUs */
 200         opplen /= sizeof(u32);
 201         for (n = 0, i = naddr; i < opplen; i += naddr, n++) {
 202                 unsigned long isuaddr = of_read_number(opprop + i, naddr);
 203                 mpic_assign_isu(mpic, n, isuaddr);
 204         }
 205
 206         /* Setup top-level get_irq */
 207         ppc_md.get_irq = mpic_get_irq;
 208
 209         /* All ISUs are setup, complete initialization */
 210         mpic_init(mpic);
 211
 212         /* Look for cascade */
 213         pseries_setup_i8259_cascade();
 214 }
 215
 216 static void __init pseries_xics_init_IRQ(void)
 217 {
 218         xics_init();
 219         pseries_setup_i8259_cascade();
 220 }
 221
 222 static void pseries_lpar_enable_pmcs(void)
 223 {
 224         unsigned long set, reset;
 225
 226         set = 1UL << 63;
 227         reset = 0;
 228         plpar_hcall_norets(H_PERFMON, set, reset);
 229 }
 230
 231 static void __init pseries_discover_pic(void)
 232 {
 233         struct device_node *np;
 234         const char *typep;
 235
 236         for (np = NULL; (np = of_find_node_by_name(np,
 237                                                    "interrupt-controller"));) {
 238                 typep = of_get_property(np, "compatible", NULL);
 239                 if (strstr(typep, "open-pic")) {
 240                         pSeries_mpic_node = of_node_get(np);
 241                         ppc_md.init_IRQ       = pseries_mpic_init_IRQ;
 242                         setup_kexec_cpu_down_mpic();
 243                         smp_init_pseries_mpic();
 244                         return;
 245                 } else if (strstr(typep, "ppc-xicp")) {
 246                         ppc_md.init_IRQ       = pseries_xics_init_IRQ;
 247                         setup_kexec_cpu_down_xics();
 248                         smp_init_pseries_xics();
 249                         return;
 250                 }
 251         }
 252         printk(KERN_ERR "pSeries_discover_pic: failed to recognize"
 253                " interrupt-controller\n");
 254 }
 255
 256 static int pci_dn_reconfig_notifier(struct notifier_block *nb, unsigned long action, void *node)
 257 {
 258         struct device_node *np = node;
 259         struct pci_dn *pci = NULL;
 260         int err = NOTIFY_OK;
 261
 262         switch (action) {
 263         case OF_RECONFIG_ATTACH_NODE:
 264                 pci = np->parent->data;
 265                 if (pci) {
 266                         update_dn_pci_info(np, pci->phb);
 267
 268                         /* Create EEH device for the OF node */
 269                         eeh_dev_init(np, pci->phb);
 270                 }
 271                 break;
 272         default:
 273                 err = NOTIFY_DONE;
 274                 break;
 275         }
 276         return err;
 277 }
 278
 279 static struct notifier_block pci_dn_reconfig_nb = {
 280         .notifier_call = pci_dn_reconfig_notifier,
 281 };
 282
 283 struct kmem_cache *dtl_cache;
 284
 285 #ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
 286 /*
 287  * Allocate space for the dispatch trace log for all possible cpus
 288  * and register the buffers with the hypervisor.  This is used for
 289  * computing time stolen by the hypervisor.
 290  */
 291 static int alloc_dispatch_logs(void)
 292 {
 293         int cpu, ret;
 294         struct paca_struct *pp;
 295         struct dtl_entry *dtl;
 296
 297         if (!firmware_has_feature(FW_FEATURE_SPLPAR))
 298                 return 0;
 299
 300         if (!dtl_cache)
 301                 return 0;
 302
 303         for_each_possible_cpu(cpu) {
 304                 pp = &paca[cpu];
 305                 dtl = kmem_cache_alloc(dtl_cache, GFP_KERNEL);
 306                 if (!dtl) {
 307                         pr_warn("Failed to allocate dispatch trace log for cpu %d\n",
 308                                 cpu);
 309                         pr_warn("Stolen time statistics will be unreliable\n");
 310                         break;
 311                 }
 312
 313                 pp->dtl_ridx = 0;
 314                 pp->dispatch_log = dtl;
 315                 pp->dispatch_log_end = dtl + N_DISPATCH_LOG;
 316                 pp->dtl_curr = dtl;
 317         }
 318
 319         /* Register the DTL for the current (boot) cpu */
 320         dtl = get_paca()->dispatch_log;
 321         get_paca()->dtl_ridx = 0;
 322         get_paca()->dtl_curr = dtl;
 323         get_paca()->lppaca_ptr->dtl_idx = 0;
 324
 325         /* hypervisor reads buffer length from this field */
 326         dtl->enqueue_to_dispatch_time = DISPATCH_LOG_BYTES;
 327         ret = register_dtl(hard_smp_processor_id(), __pa(dtl));
 328         if (ret)
 329                 pr_err("WARNING: DTL registration of cpu %d (hw %d) failed "
 330                        "with %d\n", smp_processor_id(),
 331                        hard_smp_processor_id(), ret);
 332         get_paca()->lppaca_ptr->dtl_enable_mask = 2;
 333
 334         return 0;
 335 }
 336 #else /* !CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */
 337 static inline int alloc_dispatch_logs(void)
 338 {
 339         return 0;
 340 }
 341 #endif /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */
 342
 343 static int alloc_dispatch_log_kmem_cache(void)
 344 {
 345         dtl_cache = kmem_cache_create("dtl", DISPATCH_LOG_BYTES,
 346                                                 DISPATCH_LOG_BYTES, 0, NULL);
 347         if (!dtl_cache) {
 348                 pr_warn("Failed to create dispatch trace log buffer cache\n");
 349                 pr_warn("Stolen time statistics will be unreliable\n");
 350                 return 0;
 351         }
 352
 353         return alloc_dispatch_logs();
 354 }
 355 early_initcall(alloc_dispatch_log_kmem_cache);
 356
 357 static void pseries_lpar_idle(void)
 358 {
 359         /* This would call on the cpuidle framework, and the back-end pseries
 360          * driver to  go to idle states
 361          */
 362         if (cpuidle_idle_call()) {
 363                 /* On error, execute default handler
 364                  * to go into low thread priority and possibly
 365                  * low power mode by cedeing processor to hypervisor
 366                  */
 367
 368                 /* Indicate to hypervisor that we are idle. */
 369                 get_lppaca()->idle = 1;
 370
 371                 /*
 372                  * Yield the processor to the hypervisor.  We return if
 373                  * an external interrupt occurs (which are driven prior
 374                  * to returning here) or if a prod occurs from another
 375                  * processor. When returning here, external interrupts
 376                  * are enabled.
 377                  */
 378                 cede_processor();
 379
 380                 get_lppaca()->idle = 0;
 381         }
 382 }
 383
 384 /*
 385  * Enable relocation on during exceptions. This has partition wide scope and
 386  * may take a while to complete, if it takes longer than one second we will
 387  * just give up rather than wasting any more time on this - if that turns out
 388  * to ever be a problem in practice we can move this into a kernel thread to
 389  * finish off the process later in boot.
 390  */
 391 long pSeries_enable_reloc_on_exc(void)
 392 {
 393         long rc;
 394         unsigned int delay, total_delay = 0;
 395
 396         while (1) {
 397                 rc = enable_reloc_on_exceptions();
 398                 if (!H_IS_LONG_BUSY(rc))
 399                         return rc;
 400
 401                 delay = get_longbusy_msecs(rc);
 402                 total_delay += delay;
 403                 if (total_delay > 1000) {
 404                         pr_warn("Warning: Giving up waiting to enable "
 405                                 "relocation on exceptions (%u msec)!\n",
 406                                 total_delay);
 407                         return rc;
 408                 }
 409
 410                 mdelay(delay);
 411         }
 412 }
 413 EXPORT_SYMBOL(pSeries_enable_reloc_on_exc);
 414
 415 long pSeries_disable_reloc_on_exc(void)
 416 {
 417         long rc;
 418
 419         while (1) {
 420                 rc = disable_reloc_on_exceptions();
 421                 if (!H_IS_LONG_BUSY(rc))
 422                         return rc;
 423                 mdelay(get_longbusy_msecs(rc));
 424         }
 425 }
 426 EXPORT_SYMBOL(pSeries_disable_reloc_on_exc);
 427
 428 #ifdef CONFIG_KEXEC
 429 static void pSeries_machine_kexec(struct kimage *image)
 430 {
 431         long rc;
 432
 433         if (firmware_has_feature(FW_FEATURE_SET_MODE) &&
 434             (image->type != KEXEC_TYPE_CRASH)) {
 435                 rc = pSeries_disable_reloc_on_exc();
 436                 if (rc != H_SUCCESS)
 437                         pr_warning("Warning: Failed to disable relocation on "
 438                                    "exceptions: %ld\n", rc);
 439         }
 440
 441         default_machine_kexec(image);
 442 }
 443 #endif
 444
 445 static void __init pSeries_setup_arch(void)
 446 {
 447         panic_timeout = 10;
 448
 449         /* Discover PIC type and setup ppc_md accordingly */
 450         pseries_discover_pic();
 451
 452         /* openpic global configuration register (64-bit format). */
 453         /* openpic Interrupt Source Unit pointer (64-bit format). */
 454         /* python0 facility area (mmio) (64-bit format) REAL address. */
 455
 456         /* init to some ~sane value until calibrate_delay() runs */
 457         loops_per_jiffy = 50000000;
 458
 459         fwnmi_init();
 460
 461         /* By default, only probe PCI (can be overriden by rtas_pci) */
 462         pci_add_flags(PCI_PROBE_ONLY);
 463
 464         /* Find and initialize PCI host bridges */
 465         init_pci_config_tokens();
 466         find_and_init_phbs();
 467         of_reconfig_notifier_register(&pci_dn_reconfig_nb);
 468
 469         pSeries_nvram_init();
 470
 471         if (firmware_has_feature(FW_FEATURE_LPAR)) {
 472                 vpa_init(boot_cpuid);
 473                 ppc_md.power_save = pseries_lpar_idle;
 474                 ppc_md.enable_pmcs = pseries_lpar_enable_pmcs;
 475         } else {
 476                 /* No special idle routine */
 477                 ppc_md.enable_pmcs = power4_enable_pmcs;
 478         }
 479
 480         ppc_md.pcibios_root_bridge_prepare = pseries_root_bridge_prepare;
 481
 482         if (firmware_has_feature(FW_FEATURE_SET_MODE)) {
 483                 long rc;
 484                 if ((rc = pSeries_enable_reloc_on_exc()) != H_SUCCESS) {
 485                         pr_warn("Unable to enable relocation on exceptions: "
 486                                 "%ld\n", rc);
 487                 }
 488         }
 489 }
 490
 491 static int __init pSeries_init_panel(void)
 492 {
 493         /* Manually leave the kernel version on the panel. */
 494         ppc_md.progress("Linux ppc64\n", 0);
 495         ppc_md.progress(init_utsname()->version, 0);
 496
 497         return 0;
 498 }
 499 machine_arch_initcall(pseries, pSeries_init_panel);
 500
 501 static int pseries_set_dabr(unsigned long dabr, unsigned long dabrx)
 502 {
 503         return plpar_hcall_norets(H_SET_DABR, dabr);
 504 }
 505
 506 static int pseries_set_xdabr(unsigned long dabr, unsigned long dabrx)
 507 {
 508         /* Have to set at least one bit in the DABRX according to PAPR */
 509         if (dabrx == 0 && dabr == 0)
 510                 dabrx = DABRX_USER;
 511         /* PAPR says we can only set kernel and user bits */
 512         dabrx &= DABRX_KERNEL | DABRX_USER;
 513
 514         return plpar_hcall_norets(H_SET_XDABR, dabr, dabrx);
 515 }
 516
 517 static int pseries_set_dawr(unsigned long dawr, unsigned long dawrx)
 518 {
 519         /* PAPR says we can't set HYP */
 520         dawrx &= ~DAWRX_HYP;
 521
 522         return  plapr_set_watchpoint0(dawr, dawrx);
 523 }
 524
 525 #define CMO_CHARACTERISTICS_TOKEN 44
 526 #define CMO_MAXLENGTH 1026
 527
 528 void pSeries_coalesce_init(void)
 529 {
 530         struct hvcall_mpp_x_data mpp_x_data;
 531
 532         if (firmware_has_feature(FW_FEATURE_CMO) && !h_get_mpp_x(&mpp_x_data))
 533                 powerpc_firmware_features |= FW_FEATURE_XCMO;
 534         else
 535                 powerpc_firmware_features &= ~FW_FEATURE_XCMO;
 536 }
 537
 538 /**
 539  * fw_cmo_feature_init - FW_FEATURE_CMO is not stored in ibm,hypertas-functions,
 540  * handle that here. (Stolen from parse_system_parameter_string)
 541  */
 542 void pSeries_cmo_feature_init(void)
 543 {
 544         char *ptr, *key, *value, *end;
 545         int call_status;
 546         int page_order = IOMMU_PAGE_SHIFT;
 547
 548         pr_debug(" -> fw_cmo_feature_init()\n");
 549         spin_lock(&rtas_data_buf_lock);
 550         memset(rtas_data_buf, 0, RTAS_DATA_BUF_SIZE);
 551         call_status = rtas_call(rtas_token("ibm,get-system-parameter"), 3, 1,
 552                                 NULL,
 553                                 CMO_CHARACTERISTICS_TOKEN,
 554                                 __pa(rtas_data_buf),
 555                                 RTAS_DATA_BUF_SIZE);
 556
 557         if (call_status != 0) {
 558                 spin_unlock(&rtas_data_buf_lock);
 559                 pr_debug("CMO not available\n");
 560                 pr_debug(" <- fw_cmo_feature_init()\n");
 561                 return;
 562         }
 563
 564         end = rtas_data_buf + CMO_MAXLENGTH - 2;
 565         ptr = rtas_data_buf + 2;        /* step over strlen value */
 566         key = value = ptr;
 567
 568         while (*ptr && (ptr <= end)) {
 569                 /* Separate the key and value by replacing '=' with '\0' and
 570                  * point the value at the string after the '='
 571                  */
 572                 if (ptr[0] == '=') {
 573                         ptr[0] = '\0';
 574                         value = ptr + 1;
 575                 } else if (ptr[0] == '\0' || ptr[0] == ',') {
 576                         /* Terminate the string containing the key/value pair */
 577                         ptr[0] = '\0';
 578
 579                         if (key == value) {
 580                                 pr_debug("Malformed key/value pair\n");
 581                                 /* Never found a '=', end processing */
 582                                 break;
 583                         }
 584
 585                         if (0 == strcmp(key, "CMOPageSize"))
 586                                 page_order = simple_strtol(value, NULL, 10);
 587                         else if (0 == strcmp(key, "PrPSP"))
 588                                 CMO_PrPSP = simple_strtol(value, NULL, 10);
 589                         else if (0 == strcmp(key, "SecPSP"))
 590                                 CMO_SecPSP = simple_strtol(value, NULL, 10);
 591                         value = key = ptr + 1;
 592                 }
 593                 ptr++;
 594         }
 595
 596         /* Page size is returned as the power of 2 of the page size,
 597          * convert to the page size in bytes before returning
 598          */
 599         CMO_PageSize = 1 << page_order;
 600         pr_debug("CMO_PageSize = %lu\n", CMO_PageSize);
 601
 602         if (CMO_PrPSP != -1 || CMO_SecPSP != -1) {
 603                 pr_info("CMO enabled\n");
 604                 pr_debug("CMO enabled, PrPSP=%d, SecPSP=%d\n", CMO_PrPSP,
 605                          CMO_SecPSP);
 606                 powerpc_firmware_features |= FW_FEATURE_CMO;
 607                 pSeries_coalesce_init();
 608         } else
 609                 pr_debug("CMO not enabled, PrPSP=%d, SecPSP=%d\n", CMO_PrPSP,
 610                          CMO_SecPSP);
 611         spin_unlock(&rtas_data_buf_lock);
 612         pr_debug(" <- fw_cmo_feature_init()\n");
 613 }
 614
 615 /*
 616  * Early initialization.  Relocation is on but do not reference unbolted pages
 617  */
 618 static void __init pSeries_init_early(void)
 619 {
 620         pr_debug(" -> pSeries_init_early()\n");
 621
 622 #ifdef CONFIG_HVC_CONSOLE
 623         if (firmware_has_feature(FW_FEATURE_LPAR))
 624                 hvc_vio_init_early();
 625 #endif
 626         if (firmware_has_feature(FW_FEATURE_XDABR))
 627                 ppc_md.set_dabr = pseries_set_xdabr;
 628         else if (firmware_has_feature(FW_FEATURE_DABR))
 629                 ppc_md.set_dabr = pseries_set_dabr;
 630
 631         if (firmware_has_feature(FW_FEATURE_SET_MODE))
 632                 ppc_md.set_dawr = pseries_set_dawr;
 633
 634         pSeries_cmo_feature_init();
 635         iommu_init_early_pSeries();
 636
 637         pr_debug(" <- pSeries_init_early()\n");
 638 }
 639
 640 /*
 641  * Called very early, MMU is off, device-tree isn't unflattened
 642  */
 643
 644 static int __init pseries_probe_fw_features(unsigned long node,
 645                                             const char *uname, int depth,
 646                                             void *data)
 647 {
 648         const char *prop;
 649         int len;
 650         static int hypertas_found;
 651         static int vec5_found;
 652
 653         if (depth != 1)
 654                 return 0;
 655
 656         if (!strcmp(uname, "rtas") || !strcmp(uname, "rtas@0")) {
 657                 prop = of_get_flat_dt_prop(node, "ibm,hypertas-functions",
 658                                            &len);
 659                 if (prop) {
 660                         powerpc_firmware_features |= FW_FEATURE_LPAR;
 661                         fw_hypertas_feature_init(prop, len);
 662                 }
 663
 664                 hypertas_found = 1;
 665         }
 666
 667         if (!strcmp(uname, "chosen")) {
 668                 prop = of_get_flat_dt_prop(node, "ibm,architecture-vec-5",
 669                                            &len);
 670                 if (prop)
 671                         fw_vec5_feature_init(prop, len);
 672
 673                 vec5_found = 1;
 674         }
 675
 676         return hypertas_found && vec5_found;
 677 }
 678
 679 static int __init pSeries_probe(void)
 680 {
 681         unsigned long root = of_get_flat_dt_root();
 682         const char *dtype = of_get_flat_dt_prop(root, "device_type", NULL);
 683
 684         if (dtype == NULL)
 685                 return 0;
 686         if (strcmp(dtype, "chrp"))
 687                 return 0;
 688
 689         /* Cell blades firmware claims to be chrp while it's not. Until this
 690          * is fixed, we need to avoid those here.
 691          */
 692         if (of_flat_dt_is_compatible(root, "IBM,CPBW-1.0") ||
 693             of_flat_dt_is_compatible(root, "IBM,CBEA"))
 694                 return 0;
 695
 696         pr_debug("pSeries detected, looking for LPAR capability...\n");
 697
 698         /* Now try to figure out if we are running on LPAR */
 699         of_scan_flat_dt(pseries_probe_fw_features, NULL);
 700
 701         if (firmware_has_feature(FW_FEATURE_LPAR))
 702                 hpte_init_lpar();
 703         else
 704                 hpte_init_native();
 705
 706         pr_debug("Machine is%s LPAR !\n",
 707                  (powerpc_firmware_features & FW_FEATURE_LPAR) ? "" : " not");
 708
 709         return 1;
 710 }
 711
 712 static int pSeries_pci_probe_mode(struct pci_bus *bus)
 713 {
 714         if (firmware_has_feature(FW_FEATURE_LPAR))
 715                 return PCI_PROBE_DEVTREE;
 716         return PCI_PROBE_NORMAL;
 717 }
 718
 719 /**
 720  * pSeries_power_off - tell firmware about how to power off the system.
 721  *
 722  * This function calls either the power-off rtas token in normal cases
 723  * or the ibm,power-off-ups token (if present & requested) in case of
 724  * a power failure. If power-off token is used, power on will only be
 725  * possible with power button press. If ibm,power-off-ups token is used
 726  * it will allow auto poweron after power is restored.
 727  */
 728 static void pSeries_power_off(void)
 729 {
 730         int rc;
 731         int rtas_poweroff_ups_token = rtas_token("ibm,power-off-ups");
 732
 733         if (rtas_flash_term_hook)
 734                 rtas_flash_term_hook(SYS_POWER_OFF);
 735
 736         if (rtas_poweron_auto == 0 ||
 737                 rtas_poweroff_ups_token == RTAS_UNKNOWN_SERVICE) {
 738                 rc = rtas_call(rtas_token("power-off"), 2, 1, NULL, -1, -1);
 739                 printk(KERN_INFO "RTAS power-off returned %d\n", rc);
 740         } else {
 741                 rc = rtas_call(rtas_poweroff_ups_token, 0, 1, NULL);
 742                 printk(KERN_INFO "RTAS ibm,power-off-ups returned %d\n", rc);
 743         }
 744         for (;;);
 745 }
 746
 747 #ifndef CONFIG_PCI
 748 void pSeries_final_fixup(void) { }
 749 #endif
 750
 751 define_machine(pseries) {
 752         .name                   = "pSeries",
 753         .probe                  = pSeries_probe,
 754         .setup_arch             = pSeries_setup_arch,
 755         .init_early             = pSeries_init_early,
 756         .show_cpuinfo           = pSeries_show_cpuinfo,
 757         .log_error              = pSeries_log_error,
 758         .pcibios_fixup          = pSeries_final_fixup,
 759         .pci_probe_mode         = pSeries_pci_probe_mode,
 760         .restart                = rtas_restart,
 761         .power_off              = pSeries_power_off,
 762         .halt                   = rtas_halt,
 763         .panic                  = rtas_os_term,
 764         .get_boot_time          = rtas_get_boot_time,
 765         .get_rtc_time           = rtas_get_rtc_time,
 766         .set_rtc_time           = rtas_set_rtc_time,
 767         .calibrate_decr         = generic_calibrate_decr,
 768         .progress               = rtas_progress,
 769         .system_reset_exception = pSeries_system_reset_exception,
 770         .machine_check_exception = pSeries_machine_check_exception,
 771 #ifdef CONFIG_KEXEC
 772         .machine_kexec          = pSeries_machine_kexec,
 773 #endif
 774 };