arch/arm/boot/dts/rk3288-veyron.dtsi

   1 /*
   2  * Google Veyron (and derivatives) board device tree source
   3  *
   4  * Copyright 2015 Google, Inc
   5  *
   6  * This file is dual-licensed: you can use it either under the terms
   7  * of the GPL or the X11 license, at your option. Note that this dual
   8  * licensing only applies to this file, and not this project as a
   9  * whole.
  10  *
  11  *  a) This file is free software; you can redistribute it and/or
  12  *     modify it under the terms of the GNU General Public License as
  13  *     published by the Free Software Foundation; either version 2 of the
  14  *     License, or (at your option) any later version.
  15  *
  16  *     This file is distributed in the hope that it will be useful,
  17  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  18  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  19  *     GNU General Public License for more details.
  20  *
  21  *  Or, alternatively,
  22  *
  23  *  b) Permission is hereby granted, free of charge, to any person
  24  *     obtaining a copy of this software and associated documentation
  25  *     files (the "Software"), to deal in the Software without
  26  *     restriction, including without limitation the rights to use,
  27  *     copy, modify, merge, publish, distribute, sublicense, and/or
  28  *     sell copies of the Software, and to permit persons to whom the
  29  *     Software is furnished to do so, subject to the following
  30  *     conditions:
  31  *
  32  *     The above copyright notice and this permission notice shall be
  33  *     included in all copies or substantial portions of the Software.
  34  *
  35  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  36  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  37  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  38  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  39  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  40  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  41  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  42  *     OTHER DEALINGS IN THE SOFTWARE.
  43  */
  44
  45 #include <dt-bindings/clock/rockchip,rk808.h>
  46 #include <dt-bindings/input/input.h>
  47 #include "rk3288.dtsi"
  48
  49 / {
  50         memory {
  51                 device_type = "memory";
  52                 reg = <0x0 0x80000000>;
  53         };
  54
  55         gpio_keys: gpio-keys {
  56                 compatible = "gpio-keys";
  57                 #address-cells = <1>;
  58                 #size-cells = <0>;
  59
  60                 pinctrl-names = "default";
  61                 pinctrl-0 = <&pwr_key_l>;
  62                 power {
  63                         label = "Power";
  64                         gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
  65                         linux,code = <KEY_POWER>;
  66                         debounce-interval = <100>;
  67                         gpio-key,wakeup;
  68                 };
  69         };
  70
  71         gpio-restart {
  72                 compatible = "gpio-restart";
  73                 gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
  74                 pinctrl-names = "default";
  75                 pinctrl-0 = <&ap_warm_reset_h>;
  76                 priority = <200>;
  77         };
  78
  79         emmc_pwrseq: emmc-pwrseq {
  80                 compatible = "mmc-pwrseq-emmc";
  81                 pinctrl-0 = <&emmc_reset>;
  82                 pinctrl-names = "default";
  83                 reset-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>;
  84         };
  85
  86         sdio_pwrseq: sdio-pwrseq {
  87                 compatible = "mmc-pwrseq-simple";
  88                 clocks = <&rk808 RK808_CLKOUT1>;
  89                 clock-names = "ext_clock";
  90                 pinctrl-names = "default";
  91                 pinctrl-0 = <&bt_enable_l>, <&wifi_enable_h>;
  92
  93                 /*
  94                  * On the module itself this is one of these (depending
  95                  * on the actual card populated):
  96                  * - SDIO_RESET_L_WL_REG_ON
  97                  * - PDN (power down when low)
  98                  */
  99                 reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
 100         };
 101
 102         vcc_5v: vcc-5v {
 103                 compatible = "regulator-fixed";
 104                 regulator-name = "vcc_5v";
 105                 regulator-always-on;
 106                 regulator-boot-on;
 107                 regulator-min-microvolt = <5000000>;
 108                 regulator-max-microvolt = <5000000>;
 109         };
 110
 111         vcc33_sys: vcc33-sys {
 112                 compatible = "regulator-fixed";
 113                 regulator-name = "vcc33_sys";
 114                 regulator-always-on;
 115                 regulator-boot-on;
 116                 regulator-min-microvolt = <3300000>;
 117                 regulator-max-microvolt = <3300000>;
 118         };
 119
 120         vcc50_hdmi: vcc50-hdmi {
 121                 compatible = "regulator-fixed";
 122                 regulator-name = "vcc50_hdmi";
 123                 regulator-always-on;
 124                 regulator-boot-on;
 125                 vin-supply = <&vcc_5v>;
 126         };
 127 };
 128
 129 &cpu0 {
 130         cpu0-supply = <&vdd_cpu>;
 131 };
 132
 133 &emmc {
 134         status = "okay";
 135
 136         bus-width = <8>;
 137         cap-mmc-highspeed;
 138         rockchip,default-sample-phase = <158>;
 139         disable-wp;
 140         mmc-hs200-1_8v;
 141         mmc-pwrseq = <&emmc_pwrseq>;
 142         non-removable;
 143         num-slots = <1>;
 144         pinctrl-names = "default";
 145         pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
 146 };
 147
 148 &hdmi {
 149         ddc-i2c-bus = <&i2c5>;
 150         status = "okay";
 151 };
 152
 153 &i2c0 {
 154         status = "okay";
 155
 156         clock-frequency = <400000>;
 157         i2c-scl-falling-time-ns = <50>;         /* 2.5ns measured */
 158         i2c-scl-rising-time-ns = <100>;         /* 45ns measured */
 159
 160         rk808: pmic@1b {
 161                 compatible = "rockchip,rk808";
 162                 reg = <0x1b>;
 163                 clock-output-names = "xin32k", "wifibt_32kin";
 164                 interrupt-parent = <&gpio0>;
 165                 interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 166                 pinctrl-names = "default";
 167                 pinctrl-0 = <&pmic_int_l>;
 168                 rockchip,system-power-controller;
 169                 wakeup-source;
 170                 #clock-cells = <1>;
 171
 172                 vcc1-supply = <&vcc33_sys>;
 173                 vcc2-supply = <&vcc33_sys>;
 174                 vcc3-supply = <&vcc33_sys>;
 175                 vcc4-supply = <&vcc33_sys>;
 176                 vcc6-supply = <&vcc_5v>;
 177                 vcc7-supply = <&vcc33_sys>;
 178                 vcc8-supply = <&vcc33_sys>;
 179                 vcc12-supply = <&vcc_18>;
 180                 vddio-supply = <&vcc33_io>;
 181
 182                 regulators {
 183                         vdd_cpu: DCDC_REG1 {
 184                                 regulator-name = "vdd_arm";
 185                                 regulator-always-on;
 186                                 regulator-boot-on;
 187                                 regulator-min-microvolt = <750000>;
 188                                 regulator-max-microvolt = <1450000>;
 189                                 regulator-ramp-delay = <6001>;
 190                                 regulator-state-mem {
 191                                         regulator-off-in-suspend;
 192                                 };
 193                         };
 194
 195                         vdd_gpu: DCDC_REG2 {
 196                                 regulator-name = "vdd_gpu";
 197                                 regulator-always-on;
 198                                 regulator-boot-on;
 199                                 regulator-min-microvolt = <800000>;
 200                                 regulator-max-microvolt = <1250000>;
 201                                 regulator-ramp-delay = <6001>;
 202                                 regulator-state-mem {
 203                                         regulator-on-in-suspend;
 204                                         regulator-suspend-microvolt = <1000000>;
 205                                 };
 206                         };
 207
 208                         vcc135_ddr: DCDC_REG3 {
 209                                 regulator-name = "vcc135_ddr";
 210                                 regulator-always-on;
 211                                 regulator-boot-on;
 212                                 regulator-state-mem {
 213                                         regulator-on-in-suspend;
 214                                 };
 215                         };
 216
 217                         /*
 218                          * vcc_18 has several aliases.  (vcc18_flashio and
 219                          * vcc18_wl).  We'll add those aliases here just to
 220                          * make it easier to follow the schematic.  The signals
 221                          * are actually hooked together and only separated for
 222                          * power measurement purposes).
 223                          */
 224                         vcc18_wl: vcc18_flashio: vcc_18: DCDC_REG4 {
 225                                 regulator-name = "vcc_18";
 226                                 regulator-always-on;
 227                                 regulator-boot-on;
 228                                 regulator-min-microvolt = <1800000>;
 229                                 regulator-max-microvolt = <1800000>;
 230                                 regulator-state-mem {
 231                                         regulator-on-in-suspend;
 232                                         regulator-suspend-microvolt = <1800000>;
 233                                 };
 234                         };
 235
 236                         /*
 237                          * Note that both vcc33_io and vcc33_pmuio are always
 238                          * powered together. To simplify the logic in the dts
 239                          * we just refer to vcc33_io every time something is
 240                          * powered from vcc33_pmuio. In fact, on later boards
 241                          * (such as danger) they're the same net.
 242                          */
 243                         vcc33_io: LDO_REG1 {
 244                                 regulator-name = "vcc33_io";
 245                                 regulator-always-on;
 246                                 regulator-boot-on;
 247                                 regulator-min-microvolt = <3300000>;
 248                                 regulator-max-microvolt = <3300000>;
 249                                 regulator-state-mem {
 250                                         regulator-on-in-suspend;
 251                                         regulator-suspend-microvolt = <3300000>;
 252                                 };
 253                         };
 254
 255                         vdd_10: LDO_REG3 {
 256                                 regulator-name = "vdd_10";
 257                                 regulator-always-on;
 258                                 regulator-boot-on;
 259                                 regulator-min-microvolt = <1000000>;
 260                                 regulator-max-microvolt = <1000000>;
 261                                 regulator-state-mem {
 262                                         regulator-on-in-suspend;
 263                                         regulator-suspend-microvolt = <1000000>;
 264                                 };
 265                         };
 266
 267                         vdd10_lcd_pwren_h: LDO_REG7 {
 268                                 regulator-name = "vdd10_lcd_pwren_h";
 269                                 regulator-always-on;
 270                                 regulator-boot-on;
 271                                 regulator-min-microvolt = <2500000>;
 272                                 regulator-max-microvolt = <2500000>;
 273                                 regulator-state-mem {
 274                                         regulator-off-in-suspend;
 275                                 };
 276                         };
 277
 278                         vcc33_lcd: SWITCH_REG1 {
 279                                 regulator-name = "vcc33_lcd";
 280                                 regulator-always-on;
 281                                 regulator-boot-on;
 282                                 regulator-state-mem {
 283                                         regulator-off-in-suspend;
 284                                 };
 285                         };
 286                 };
 287         };
 288 };
 289
 290 &i2c1 {
 291         status = "okay";
 292
 293         clock-frequency = <400000>;
 294         i2c-scl-falling-time-ns = <50>;         /* 2.5ns measured */
 295         i2c-scl-rising-time-ns = <100>;         /* 40ns measured */
 296
 297         tpm: tpm@20 {
 298                 compatible = "infineon,slb9645tt";
 299                 reg = <0x20>;
 300                 powered-while-suspended;
 301         };
 302 };
 303
 304 &i2c2 {
 305         status = "okay";
 306
 307         /* 100kHz since 4.7k resistors don't rise fast enough */
 308         clock-frequency = <100000>;
 309         i2c-scl-falling-time-ns = <50>;         /* 10ns measured */
 310         i2c-scl-rising-time-ns = <800>;         /* 600ns measured */
 311 };
 312
 313 &i2c4 {
 314         status = "okay";
 315
 316         clock-frequency = <400000>;
 317         i2c-scl-falling-time-ns = <50>;         /* 11ns measured */
 318         i2c-scl-rising-time-ns = <300>;         /* 225ns measured */
 319 };
 320
 321 &i2c5 {
 322         status = "okay";
 323
 324         clock-frequency = <100000>;
 325         i2c-scl-falling-time-ns = <300>;
 326         i2c-scl-rising-time-ns = <1000>;
 327 };
 328
 329 &io_domains {
 330         status = "okay";
 331
 332         bb-supply = <&vcc33_io>;
 333         dvp-supply = <&vcc_18>;
 334         flash0-supply = <&vcc18_flashio>;
 335         gpio1830-supply = <&vcc33_io>;
 336         gpio30-supply = <&vcc33_io>;
 337         lcdc-supply = <&vcc33_lcd>;
 338         wifi-supply = <&vcc18_wl>;
 339 };
 340
 341 &pwm1 {
 342         status = "okay";
 343 };
 344
 345 &sdio0 {
 346         status = "okay";
 347
 348         bus-width = <4>;
 349         cap-sd-highspeed;
 350         cap-sdio-irq;
 351         keep-power-in-suspend;
 352         mmc-pwrseq = <&sdio_pwrseq>;
 353         non-removable;
 354         num-slots = <1>;
 355         pinctrl-names = "default";
 356         pinctrl-0 = <&sdio0_clk &sdio0_cmd &sdio0_bus4>;
 357         sd-uhs-sdr12;
 358         sd-uhs-sdr25;
 359         sd-uhs-sdr50;
 360         sd-uhs-sdr104;
 361         vmmc-supply = <&vcc33_sys>;
 362         vqmmc-supply = <&vcc18_wl>;
 363 };
 364
 365 &spi2 {
 366         status = "okay";
 367
 368         rx-sample-delay-ns = <12>;
 369 };
 370
 371 &tsadc {
 372         status = "okay";
 373
 374         rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
 375         rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
 376 };
 377
 378 &uart0 {
 379         status = "okay";
 380
 381         /* We need to go faster than 24MHz, so adjust clock parents / rates */
 382         assigned-clocks = <&cru SCLK_UART0>;
 383         assigned-clock-rates = <48000000>;
 384
 385         /* Pins don't include flow control by default; add that in */
 386         pinctrl-names = "default";
 387         pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
 388 };
 389
 390 &uart1 {
 391         status = "okay";
 392 };
 393
 394 &uart2 {
 395         status = "okay";
 396 };
 397
 398 &usbphy {
 399         status = "okay";
 400 };
 401
 402 &usb_host0_ehci {
 403         status = "okay";
 404
 405         needs-reset-on-resume;
 406 };
 407
 408 &usb_host1 {
 409         status = "okay";
 410 };
 411
 412 &usb_otg {
 413         status = "okay";
 414
 415         assigned-clocks = <&cru SCLK_USBPHY480M_SRC>;
 416         assigned-clock-parents = <&cru SCLK_OTGPHY0>;
 417         dr_mode = "host";
 418 };
 419
 420 &vopb {
 421         status = "okay";
 422 };
 423
 424 &vopb_mmu {
 425         status = "okay";
 426 };
 427
 428 &wdt {
 429         status = "okay";
 430 };
 431
 432 &pinctrl {
 433         pinctrl-names = "default", "sleep";
 434         pinctrl-0 = <
 435                 /* Common for sleep and wake, but no owners */
 436                 &global_pwroff
 437         >;
 438         pinctrl-1 = <
 439                 /* Common for sleep and wake, but no owners */
 440                 &global_pwroff
 441         >;
 442
 443         pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
 444                 bias-disable;
 445                 drive-strength = <8>;
 446         };
 447
 448         pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
 449                 bias-pull-up;
 450                 drive-strength = <8>;
 451         };
 452
 453         pcfg_output_high: pcfg-output-high {
 454                 output-high;
 455         };
 456
 457         pcfg_output_low: pcfg-output-low {
 458                 output-low;
 459         };
 460
 461         buttons {
 462                 pwr_key_l: pwr-key-l {
 463                         rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
 464                 };
 465         };
 466
 467         emmc {
 468                 emmc_reset: emmc-reset {
 469                         rockchip,pins = <2 9 RK_FUNC_GPIO &pcfg_pull_none>;
 470                 };
 471
 472                 /*
 473                  * We run eMMC at max speed; bump up drive strength.
 474                  * We also have external pulls, so disable the internal ones.
 475                  */
 476                 emmc_clk: emmc-clk {
 477                         rockchip,pins = <3 18 RK_FUNC_2 &pcfg_pull_none_drv_8ma>;
 478                 };
 479
 480                 emmc_cmd: emmc-cmd {
 481                         rockchip,pins = <3 16 RK_FUNC_2 &pcfg_pull_none_drv_8ma>;
 482                 };
 483
 484                 emmc_bus8: emmc-bus8 {
 485                         rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
 486                                         <3 1 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
 487                                         <3 2 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
 488                                         <3 3 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
 489                                         <3 4 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
 490                                         <3 5 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
 491                                         <3 6 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
 492                                         <3 7 RK_FUNC_2 &pcfg_pull_none_drv_8ma>;
 493                 };
 494         };
 495
 496         pmic {
 497                 pmic_int_l: pmic-int-l {
 498                         rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
 499                 };
 500         };
 501
 502         reboot {
 503                 ap_warm_reset_h: ap-warm-reset-h {
 504                         rockchip,pins = <RK_GPIO0 13 RK_FUNC_GPIO &pcfg_pull_none>;
 505                 };
 506         };
 507
 508         recovery-switch {
 509                 rec_mode_l: rec-mode-l {
 510                         rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>;
 511                 };
 512         };
 513
 514         sdio0 {
 515                 wifi_enable_h: wifienable-h {
 516                         rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>;
 517                 };
 518
 519                 /* NOTE: mislabelled on schematic; should be bt_enable_h */
 520                 bt_enable_l: bt-enable-l {
 521                         rockchip,pins = <4 29 RK_FUNC_GPIO &pcfg_pull_none>;
 522                 };
 523
 524                 /*
 525                  * We run sdio0 at max speed; bump up drive strength.
 526                  * We also have external pulls, so disable the internal ones.
 527                  */
 528                 sdio0_bus4: sdio0-bus4 {
 529                         rockchip,pins = <4 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
 530                                         <4 21 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
 531                                         <4 22 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
 532                                         <4 23 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
 533                 };
 534
 535                 sdio0_cmd: sdio0-cmd {
 536                         rockchip,pins = <4 24 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
 537                 };
 538
 539                 sdio0_clk: sdio0-clk {
 540                         rockchip,pins = <4 25 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
 541                 };
 542         };
 543
 544         tpm {
 545                 tpm_int_h: tpm-int-h {
 546                         rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_none>;
 547                 };
 548         };
 549
 550         write-protect {
 551                 fw_wp_ap: fw-wp-ap {
 552                         rockchip,pins = <7 6 RK_FUNC_GPIO &pcfg_pull_none>;
 553                 };
 554         };
 555 };