arch/arm/boot/dts/imx28.dtsi

   1 /*
   2  * Copyright 2012 Freescale Semiconductor, Inc.
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 /include/ "skeleton.dtsi"
  13
  14 / {
  15         interrupt-parent = <&icoll>;
  16
  17         aliases {
  18                 gpio0 = &gpio0;
  19                 gpio1 = &gpio1;
  20                 gpio2 = &gpio2;
  21                 gpio3 = &gpio3;
  22                 gpio4 = &gpio4;
  23                 saif0 = &saif0;
  24                 saif1 = &saif1;
  25                 serial0 = &auart0;
  26                 serial1 = &auart1;
  27                 serial2 = &auart2;
  28                 serial3 = &auart3;
  29                 serial4 = &auart4;
  30                 ethernet0 = &mac0;
  31                 ethernet1 = &mac1;
  32         };
  33
  34         cpus {
  35                 #address-cells = <0>;
  36                 #size-cells = <0>;
  37
  38                 cpu {
  39                         compatible = "arm,arm926ej-s";
  40                         device_type = "cpu";
  41                 };
  42         };
  43
  44         apb@80000000 {
  45                 compatible = "simple-bus";
  46                 #address-cells = <1>;
  47                 #size-cells = <1>;
  48                 reg = <0x80000000 0x80000>;
  49                 ranges;
  50
  51                 apbh@80000000 {
  52                         compatible = "simple-bus";
  53                         #address-cells = <1>;
  54                         #size-cells = <1>;
  55                         reg = <0x80000000 0x3c900>;
  56                         ranges;
  57
  58                         icoll: interrupt-controller@80000000 {
  59                                 compatible = "fsl,imx28-icoll", "fsl,icoll";
  60                                 interrupt-controller;
  61                                 #interrupt-cells = <1>;
  62                                 reg = <0x80000000 0x2000>;
  63                         };
  64
  65                         hsadc@80002000 {
  66                                 reg = <0x80002000 0x2000>;
  67                                 interrupts = <13 87>;
  68                                 dmas = <&dma_apbh 12>;
  69                                 dma-names = "rx";
  70                                 status = "disabled";
  71                         };
  72
  73                         dma_apbh: dma-apbh@80004000 {
  74                                 compatible = "fsl,imx28-dma-apbh";
  75                                 reg = <0x80004000 0x2000>;
  76                                 interrupts = <82 83 84 85
  77                                               88 88 88 88
  78                                               88 88 88 88
  79                                               87 86 0 0>;
  80                                 interrupt-names = "ssp0", "ssp1", "ssp2", "ssp3",
  81                                                   "gpmi0", "gmpi1", "gpmi2", "gmpi3",
  82                                                   "gpmi4", "gmpi5", "gpmi6", "gmpi7",
  83                                                   "hsadc", "lcdif", "empty", "empty";
  84                                 #dma-cells = <1>;
  85                                 dma-channels = <16>;
  86                                 clocks = <&clks 25>;
  87                         };
  88
  89                         perfmon@80006000 {
  90                                 reg = <0x80006000 0x800>;
  91                                 interrupts = <27>;
  92                                 status = "disabled";
  93                         };
  94
  95                         gpmi-nand@8000c000 {
  96                                 compatible = "fsl,imx28-gpmi-nand";
  97                                 #address-cells = <1>;
  98                                 #size-cells = <1>;
  99                                 reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
 100                                 reg-names = "gpmi-nand", "bch";
 101                                 interrupts = <88>, <41>;
 102                                 interrupt-names = "gpmi-dma", "bch";
 103                                 clocks = <&clks 50>;
 104                                 clock-names = "gpmi_io";
 105                                 dmas = <&dma_apbh 4>;
 106                                 dma-names = "rx-tx";
 107                                 fsl,gpmi-dma-channel = <4>;
 108                                 status = "disabled";
 109                         };
 110
 111                         ssp0: ssp@80010000 {
 112                                 #address-cells = <1>;
 113                                 #size-cells = <0>;
 114                                 reg = <0x80010000 0x2000>;
 115                                 interrupts = <96 82>;
 116                                 clocks = <&clks 46>;
 117                                 dmas = <&dma_apbh 0>;
 118                                 dma-names = "rx-tx";
 119                                 fsl,ssp-dma-channel = <0>;
 120                                 status = "disabled";
 121                         };
 122
 123                         ssp1: ssp@80012000 {
 124                                 #address-cells = <1>;
 125                                 #size-cells = <0>;
 126                                 reg = <0x80012000 0x2000>;
 127                                 interrupts = <97 83>;
 128                                 clocks = <&clks 47>;
 129                                 dmas = <&dma_apbh 1>;
 130                                 dma-names = "rx-tx";
 131                                 fsl,ssp-dma-channel = <1>;
 132                                 status = "disabled";
 133                         };
 134
 135                         ssp2: ssp@80014000 {
 136                                 #address-cells = <1>;
 137                                 #size-cells = <0>;
 138                                 reg = <0x80014000 0x2000>;
 139                                 interrupts = <98 84>;
 140                                 clocks = <&clks 48>;
 141                                 dmas = <&dma_apbh 2>;
 142                                 dma-names = "rx-tx";
 143                                 fsl,ssp-dma-channel = <2>;
 144                                 status = "disabled";
 145                         };
 146
 147                         ssp3: ssp@80016000 {
 148                                 #address-cells = <1>;
 149                                 #size-cells = <0>;
 150                                 reg = <0x80016000 0x2000>;
 151                                 interrupts = <99 85>;
 152                                 clocks = <&clks 49>;
 153                                 dmas = <&dma_apbh 3>;
 154                                 dma-names = "rx-tx";
 155                                 fsl,ssp-dma-channel = <3>;
 156                                 status = "disabled";
 157                         };
 158
 159                         pinctrl@80018000 {
 160                                 #address-cells = <1>;
 161                                 #size-cells = <0>;
 162                                 compatible = "fsl,imx28-pinctrl", "simple-bus";
 163                                 reg = <0x80018000 0x2000>;
 164
 165                                 gpio0: gpio@0 {
 166                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 167                                         interrupts = <127>;
 168                                         gpio-controller;
 169                                         #gpio-cells = <2>;
 170                                         interrupt-controller;
 171                                         #interrupt-cells = <2>;
 172                                 };
 173
 174                                 gpio1: gpio@1 {
 175                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 176                                         interrupts = <126>;
 177                                         gpio-controller;
 178                                         #gpio-cells = <2>;
 179                                         interrupt-controller;
 180                                         #interrupt-cells = <2>;
 181                                 };
 182
 183                                 gpio2: gpio@2 {
 184                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 185                                         interrupts = <125>;
 186                                         gpio-controller;
 187                                         #gpio-cells = <2>;
 188                                         interrupt-controller;
 189                                         #interrupt-cells = <2>;
 190                                 };
 191
 192                                 gpio3: gpio@3 {
 193                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 194                                         interrupts = <124>;
 195                                         gpio-controller;
 196                                         #gpio-cells = <2>;
 197                                         interrupt-controller;
 198                                         #interrupt-cells = <2>;
 199                                 };
 200
 201                                 gpio4: gpio@4 {
 202                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 203                                         interrupts = <123>;
 204                                         gpio-controller;
 205                                         #gpio-cells = <2>;
 206                                         interrupt-controller;
 207                                         #interrupt-cells = <2>;
 208                                 };
 209
 210                                 duart_pins_a: duart@0 {
 211                                         reg = <0>;
 212                                         fsl,pinmux-ids = <
 213                                                 0x3102 /* MX28_PAD_PWM0__DUART_RX */
 214                                                 0x3112 /* MX28_PAD_PWM1__DUART_TX */
 215                                         >;
 216                                         fsl,drive-strength = <0>;
 217                                         fsl,voltage = <1>;
 218                                         fsl,pull-up = <0>;
 219                                 };
 220
 221                                 duart_pins_b: duart@1 {
 222                                         reg = <1>;
 223                                         fsl,pinmux-ids = <
 224                                                 0x3022 /* MX28_PAD_AUART0_CTS__DUART_RX */
 225                                                 0x3032 /* MX28_PAD_AUART0_RTS__DUART_TX */
 226                                         >;
 227                                         fsl,drive-strength = <0>;
 228                                         fsl,voltage = <1>;
 229                                         fsl,pull-up = <0>;
 230                                 };
 231
 232                                 duart_4pins_a: duart-4pins@0 {
 233                                         reg = <0>;
 234                                         fsl,pinmux-ids = <
 235                                                 0x3022 /* MX28_PAD_AUART0_CTS__DUART_RX */
 236                                                 0x3032 /* MX28_PAD_AUART0_RTS__DUART_TX */
 237                                                 0x3002 /* MX28_PAD_AUART0_RX__DUART_CTS */
 238                                                 0x3012 /* MX28_PAD_AUART0_TX__DUART_RTS */
 239                                         >;
 240                                         fsl,drive-strength = <0>;
 241                                         fsl,voltage = <1>;
 242                                         fsl,pull-up = <0>;
 243                                 };
 244
 245                                 gpmi_pins_a: gpmi-nand@0 {
 246                                         reg = <0>;
 247                                         fsl,pinmux-ids = <
 248                                                 0x0000 /* MX28_PAD_GPMI_D00__GPMI_D0 */
 249                                                 0x0010 /* MX28_PAD_GPMI_D01__GPMI_D1 */
 250                                                 0x0020 /* MX28_PAD_GPMI_D02__GPMI_D2 */
 251                                                 0x0030 /* MX28_PAD_GPMI_D03__GPMI_D3 */
 252                                                 0x0040 /* MX28_PAD_GPMI_D04__GPMI_D4 */
 253                                                 0x0050 /* MX28_PAD_GPMI_D05__GPMI_D5 */
 254                                                 0x0060 /* MX28_PAD_GPMI_D06__GPMI_D6 */
 255                                                 0x0070 /* MX28_PAD_GPMI_D07__GPMI_D7 */
 256                                                 0x0100 /* MX28_PAD_GPMI_CE0N__GPMI_CE0N */
 257                                                 0x0140 /* MX28_PAD_GPMI_RDY0__GPMI_READY0 */
 258                                                 0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */
 259                                                 0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */
 260                                                 0x01a0 /* MX28_PAD_GPMI_ALE__GPMI_ALE */
 261                                                 0x01b0 /* MX28_PAD_GPMI_CLE__GPMI_CLE */
 262                                                 0x01c0 /* MX28_PAD_GPMI_RESETN__GPMI_RESETN */
 263                                         >;
 264                                         fsl,drive-strength = <0>;
 265                                         fsl,voltage = <1>;
 266                                         fsl,pull-up = <0>;
 267                                 };
 268
 269                                 gpmi_status_cfg: gpmi-status-cfg {
 270                                         fsl,pinmux-ids = <
 271                                                 0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */
 272                                                 0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */
 273                                                 0x01c0 /* MX28_PAD_GPMI_RESETN__GPMI_RESETN */
 274                                         >;
 275                                         fsl,drive-strength = <2>;
 276                                 };
 277
 278                                 auart0_pins_a: auart0@0 {
 279                                         reg = <0>;
 280                                         fsl,pinmux-ids = <
 281                                                 0x3000 /* MX28_PAD_AUART0_RX__AUART0_RX */
 282                                                 0x3010 /* MX28_PAD_AUART0_TX__AUART0_TX */
 283                                                 0x3020 /* MX28_PAD_AUART0_CTS__AUART0_CTS */
 284                                                 0x3030 /* MX28_PAD_AUART0_RTS__AUART0_RTS */
 285                                         >;
 286                                         fsl,drive-strength = <0>;
 287                                         fsl,voltage = <1>;
 288                                         fsl,pull-up = <0>;
 289                                 };
 290
 291                                 auart0_2pins_a: auart0-2pins@0 {
 292                                         reg = <0>;
 293                                         fsl,pinmux-ids = <
 294                                                 0x3000 /* MX28_PAD_AUART0_RX__AUART0_RX */
 295                                                 0x3010 /* MX28_PAD_AUART0_TX__AUART0_TX */
 296                                         >;
 297                                         fsl,drive-strength = <0>;
 298                                         fsl,voltage = <1>;
 299                                         fsl,pull-up = <0>;
 300                                 };
 301
 302                                 auart1_pins_a: auart1@0 {
 303                                         reg = <0>;
 304                                         fsl,pinmux-ids = <
 305                                                 0x3040 /* MX28_PAD_AUART1_RX__AUART1_RX */
 306                                                 0x3050 /* MX28_PAD_AUART1_TX__AUART1_TX */
 307                                                 0x3060 /* MX28_PAD_AUART1_CTS__AUART1_CTS */
 308                                                 0x3070 /* MX28_PAD_AUART1_RTS__AUART1_RTS */
 309                                         >;
 310                                         fsl,drive-strength = <0>;
 311                                         fsl,voltage = <1>;
 312                                         fsl,pull-up = <0>;
 313                                 };
 314
 315                                 auart1_2pins_a: auart1-2pins@0 {
 316                                         reg = <0>;
 317                                         fsl,pinmux-ids = <
 318                                                 0x3040 /* MX28_PAD_AUART1_RX__AUART1_RX */
 319                                                 0x3050 /* MX28_PAD_AUART1_TX__AUART1_TX */
 320                                         >;
 321                                         fsl,drive-strength = <0>;
 322                                         fsl,voltage = <1>;
 323                                         fsl,pull-up = <0>;
 324                                 };
 325
 326                                 auart2_2pins_a: auart2-2pins@0 {
 327                                         reg = <0>;
 328                                         fsl,pinmux-ids = <
 329                                                 0x2101 /* MX28_PAD_SSP2_SCK__AUART2_RX */
 330                                                 0x2111 /* MX28_PAD_SSP2_MOSI__AUART2_TX */
 331                                         >;
 332                                         fsl,drive-strength = <0>;
 333                                         fsl,voltage = <1>;
 334                                         fsl,pull-up = <0>;
 335                                 };
 336
 337                                 auart3_pins_a: auart3@0 {
 338                                         reg = <0>;
 339                                         fsl,pinmux-ids = <
 340                                                 0x30c0 /* MX28_PAD_AUART3_RX__AUART3_RX */
 341                                                 0x30d0 /* MX28_PAD_AUART3_TX__AUART3_TX */
 342                                                 0x30e0 /* MX28_PAD_AUART3_CTS__AUART3_CTS */
 343                                                 0x30f0 /* MX28_PAD_AUART3_RTS__AUART3_RTS */
 344                                         >;
 345                                         fsl,drive-strength = <0>;
 346                                         fsl,voltage = <1>;
 347                                         fsl,pull-up = <0>;
 348                                 };
 349
 350                                 auart3_2pins_a: auart3-2pins@0 {
 351                                         reg = <0>;
 352                                         fsl,pinmux-ids = <
 353                                                 0x2121 /* MX28_PAD_SSP2_MISO__AUART3_RX */
 354                                                 0x2131 /* MX28_PAD_SSP2_SS0__AUART3_TX */
 355                                         >;
 356                                         fsl,drive-strength = <0>;
 357                                         fsl,voltage = <1>;
 358                                         fsl,pull-up = <0>;
 359                                 };
 360
 361                                 mac0_pins_a: mac0@0 {
 362                                         reg = <0>;
 363                                         fsl,pinmux-ids = <
 364                                                 0x4000 /* MX28_PAD_ENET0_MDC__ENET0_MDC */
 365                                                 0x4010 /* MX28_PAD_ENET0_MDIO__ENET0_MDIO */
 366                                                 0x4020 /* MX28_PAD_ENET0_RX_EN__ENET0_RX_EN */
 367                                                 0x4030 /* MX28_PAD_ENET0_RXD0__ENET0_RXD0 */
 368                                                 0x4040 /* MX28_PAD_ENET0_RXD1__ENET0_RXD1 */
 369                                                 0x4060 /* MX28_PAD_ENET0_TX_EN__ENET0_TX_EN */
 370                                                 0x4070 /* MX28_PAD_ENET0_TXD0__ENET0_TXD0 */
 371                                                 0x4080 /* MX28_PAD_ENET0_TXD1__ENET0_TXD1 */
 372                                                 0x4100 /* MX28_PAD_ENET_CLK__CLKCTRL_ENET */
 373                                         >;
 374                                         fsl,drive-strength = <1>;
 375                                         fsl,voltage = <1>;
 376                                         fsl,pull-up = <1>;
 377                                 };
 378
 379                                 mac1_pins_a: mac1@0 {
 380                                         reg = <0>;
 381                                         fsl,pinmux-ids = <
 382                                                 0x40f1 /* MX28_PAD_ENET0_CRS__ENET1_RX_EN */
 383                                                 0x4091 /* MX28_PAD_ENET0_RXD2__ENET1_RXD0 */
 384                                                 0x40a1 /* MX28_PAD_ENET0_RXD3__ENET1_RXD1 */
 385                                                 0x40e1 /* MX28_PAD_ENET0_COL__ENET1_TX_EN */
 386                                                 0x40b1 /* MX28_PAD_ENET0_TXD2__ENET1_TXD0 */
 387                                                 0x40c1 /* MX28_PAD_ENET0_TXD3__ENET1_TXD1 */
 388                                         >;
 389                                         fsl,drive-strength = <1>;
 390                                         fsl,voltage = <1>;
 391                                         fsl,pull-up = <1>;
 392                                 };
 393
 394                                 mmc0_8bit_pins_a: mmc0-8bit@0 {
 395                                         reg = <0>;
 396                                         fsl,pinmux-ids = <
 397                                                 0x2000 /* MX28_PAD_SSP0_DATA0__SSP0_D0 */
 398                                                 0x2010 /* MX28_PAD_SSP0_DATA1__SSP0_D1 */
 399                                                 0x2020 /* MX28_PAD_SSP0_DATA2__SSP0_D2 */
 400                                                 0x2030 /* MX28_PAD_SSP0_DATA3__SSP0_D3 */
 401                                                 0x2040 /* MX28_PAD_SSP0_DATA4__SSP0_D4 */
 402                                                 0x2050 /* MX28_PAD_SSP0_DATA5__SSP0_D5 */
 403                                                 0x2060 /* MX28_PAD_SSP0_DATA6__SSP0_D6 */
 404                                                 0x2070 /* MX28_PAD_SSP0_DATA7__SSP0_D7 */
 405                                                 0x2080 /* MX28_PAD_SSP0_CMD__SSP0_CMD */
 406                                                 0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */
 407                                                 0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */
 408                                         >;
 409                                         fsl,drive-strength = <1>;
 410                                         fsl,voltage = <1>;
 411                                         fsl,pull-up = <1>;
 412                                 };
 413
 414                                 mmc0_4bit_pins_a: mmc0-4bit@0 {
 415                                         reg = <0>;
 416                                         fsl,pinmux-ids = <
 417                                                 0x2000 /* MX28_PAD_SSP0_DATA0__SSP0_D0 */
 418                                                 0x2010 /* MX28_PAD_SSP0_DATA1__SSP0_D1 */
 419                                                 0x2020 /* MX28_PAD_SSP0_DATA2__SSP0_D2 */
 420                                                 0x2030 /* MX28_PAD_SSP0_DATA3__SSP0_D3 */
 421                                                 0x2080 /* MX28_PAD_SSP0_CMD__SSP0_CMD */
 422                                                 0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */
 423                                                 0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */
 424                                         >;
 425                                         fsl,drive-strength = <1>;
 426                                         fsl,voltage = <1>;
 427                                         fsl,pull-up = <1>;
 428                                 };
 429
 430                                 mmc0_cd_cfg: mmc0-cd-cfg {
 431                                         fsl,pinmux-ids = <
 432                                                 0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */
 433                                         >;
 434                                         fsl,pull-up = <0>;
 435                                 };
 436
 437                                 mmc0_sck_cfg: mmc0-sck-cfg {
 438                                         fsl,pinmux-ids = <
 439                                                 0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */
 440                                         >;
 441                                         fsl,drive-strength = <2>;
 442                                         fsl,pull-up = <0>;
 443                                 };
 444
 445                                 i2c0_pins_a: i2c0@0 {
 446                                         reg = <0>;
 447                                         fsl,pinmux-ids = <
 448                                                 0x3180 /* MX28_PAD_I2C0_SCL__I2C0_SCL */
 449                                                 0x3190 /* MX28_PAD_I2C0_SDA__I2C0_SDA */
 450                                         >;
 451                                         fsl,drive-strength = <1>;
 452                                         fsl,voltage = <1>;
 453                                         fsl,pull-up = <1>;
 454                                 };
 455
 456                                 i2c0_pins_b: i2c0@1 {
 457                                         reg = <1>;
 458                                         fsl,pinmux-ids = <
 459                                                 0x3001 /* MX28_PAD_AUART0_RX__I2C0_SCL */
 460                                                 0x3011 /* MX28_PAD_AUART0_TX__I2C0_SDA */
 461                                         >;
 462                                         fsl,drive-strength = <1>;
 463                                         fsl,voltage = <1>;
 464                                         fsl,pull-up = <1>;
 465                                 };
 466
 467                                 i2c1_pins_a: i2c1@0 {
 468                                         reg = <0>;
 469                                         fsl,pinmux-ids = <
 470                                                 0x3101 /* MX28_PAD_PWM0__I2C1_SCL */
 471                                                 0x3111 /* MX28_PAD_PWM1__I2C1_SDA */
 472                                         >;
 473                                         fsl,drive-strength = <1>;
 474                                         fsl,voltage = <1>;
 475                                         fsl,pull-up = <1>;
 476                                 };
 477
 478                                 saif0_pins_a: saif0@0 {
 479                                         reg = <0>;
 480                                         fsl,pinmux-ids = <
 481                                                 0x3140 /* MX28_PAD_SAIF0_MCLK__SAIF0_MCLK */
 482                                                 0x3150 /* MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK */
 483                                                 0x3160 /* MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK */
 484                                                 0x3170 /* MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 */
 485                                         >;
 486                                         fsl,drive-strength = <2>;
 487                                         fsl,voltage = <1>;
 488                                         fsl,pull-up = <1>;
 489                                 };
 490
 491                                 saif1_pins_a: saif1@0 {
 492                                         reg = <0>;
 493                                         fsl,pinmux-ids = <
 494                                                 0x31a0 /* MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 */
 495                                         >;
 496                                         fsl,drive-strength = <2>;
 497                                         fsl,voltage = <1>;
 498                                         fsl,pull-up = <1>;
 499                                 };
 500
 501                                 pwm0_pins_a: pwm0@0 {
 502                                         reg = <0>;
 503                                         fsl,pinmux-ids = <
 504                                                 0x3100 /* MX28_PAD_PWM0__PWM_0 */
 505                                         >;
 506                                         fsl,drive-strength = <0>;
 507                                         fsl,voltage = <1>;
 508                                         fsl,pull-up = <0>;
 509                                 };
 510
 511                                 pwm2_pins_a: pwm2@0 {
 512                                         reg = <0>;
 513                                         fsl,pinmux-ids = <
 514                                                 0x3120 /* MX28_PAD_PWM2__PWM_2 */
 515                                         >;
 516                                         fsl,drive-strength = <0>;
 517                                         fsl,voltage = <1>;
 518                                         fsl,pull-up = <0>;
 519                                 };
 520
 521                                 pwm3_pins_a: pwm3@0 {
 522                                         reg = <0>;
 523                                         fsl,pinmux-ids = <
 524                                                 0x31c0 /* MX28_PAD_PWM3__PWM_3 */
 525                                         >;
 526                                         fsl,drive-strength = <0>;
 527                                         fsl,voltage = <1>;
 528                                         fsl,pull-up = <0>;
 529                                 };
 530
 531                                 pwm3_pins_b: pwm3@1 {
 532                                         reg = <1>;
 533                                         fsl,pinmux-ids = <
 534                                                 0x3141 /* MX28_PAD_SAIF0_MCLK__PWM3 */
 535                                         >;
 536                                         fsl,drive-strength = <0>;
 537                                         fsl,voltage = <1>;
 538                                         fsl,pull-up = <0>;
 539                                 };
 540
 541                                 pwm4_pins_a: pwm4@0 {
 542                                         reg = <0>;
 543                                         fsl,pinmux-ids = <
 544                                                 0x31d0 /* MX28_PAD_PWM4__PWM_4 */
 545                                         >;
 546                                         fsl,drive-strength = <0>;
 547                                         fsl,voltage = <1>;
 548                                         fsl,pull-up = <0>;
 549                                 };
 550
 551                                 lcdif_24bit_pins_a: lcdif-24bit@0 {
 552                                         reg = <0>;
 553                                         fsl,pinmux-ids = <
 554                                                 0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
 555                                                 0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
 556                                                 0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
 557                                                 0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
 558                                                 0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
 559                                                 0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
 560                                                 0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
 561                                                 0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
 562                                                 0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
 563                                                 0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
 564                                                 0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
 565                                                 0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
 566                                                 0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
 567                                                 0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
 568                                                 0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
 569                                                 0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
 570                                                 0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
 571                                                 0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
 572                                                 0x1120 /* MX28_PAD_LCD_D18__LCD_D18 */
 573                                                 0x1130 /* MX28_PAD_LCD_D19__LCD_D19 */
 574                                                 0x1140 /* MX28_PAD_LCD_D20__LCD_D20 */
 575                                                 0x1150 /* MX28_PAD_LCD_D21__LCD_D21 */
 576                                                 0x1160 /* MX28_PAD_LCD_D22__LCD_D22 */
 577                                                 0x1170 /* MX28_PAD_LCD_D23__LCD_D23 */
 578                                         >;
 579                                         fsl,drive-strength = <0>;
 580                                         fsl,voltage = <1>;
 581                                         fsl,pull-up = <0>;
 582                                 };
 583
 584                                 lcdif_16bit_pins_a: lcdif-16bit@0 {
 585                                         reg = <0>;
 586                                         fsl,pinmux-ids = <
 587                                                 0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
 588                                                 0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
 589                                                 0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
 590                                                 0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
 591                                                 0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
 592                                                 0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
 593                                                 0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
 594                                                 0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
 595                                                 0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
 596                                                 0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
 597                                                 0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
 598                                                 0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
 599                                                 0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
 600                                                 0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
 601                                                 0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
 602                                                 0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
 603                                         >;
 604                                         fsl,drive-strength = <0>;
 605                                         fsl,voltage = <1>;
 606                                         fsl,pull-up = <0>;
 607                                 };
 608
 609                                 can0_pins_a: can0@0 {
 610                                         reg = <0>;
 611                                         fsl,pinmux-ids = <
 612                                                 0x0161 /* MX28_PAD_GPMI_RDY2__CAN0_TX */
 613                                                 0x0171 /* MX28_PAD_GPMI_RDY3__CAN0_RX */
 614                                         >;
 615                                         fsl,drive-strength = <0>;
 616                                         fsl,voltage = <1>;
 617                                         fsl,pull-up = <0>;
 618                                 };
 619
 620                                 can1_pins_a: can1@0 {
 621                                         reg = <0>;
 622                                         fsl,pinmux-ids = <
 623                                                 0x0121 /* MX28_PAD_GPMI_CE2N__CAN1_TX */
 624                                                 0x0131 /* MX28_PAD_GPMI_CE3N__CAN1_RX */
 625                                         >;
 626                                         fsl,drive-strength = <0>;
 627                                         fsl,voltage = <1>;
 628                                         fsl,pull-up = <0>;
 629                                 };
 630
 631                                 spi2_pins_a: spi2@0 {
 632                                         reg = <0>;
 633                                         fsl,pinmux-ids = <
 634                                                 0x2100 /* MX28_PAD_SSP2_SCK__SSP2_SCK */
 635                                                 0x2110 /* MX28_PAD_SSP2_MOSI__SSP2_CMD */
 636                                                 0x2120 /* MX28_PAD_SSP2_MISO__SSP2_D0 */
 637                                                 0x2130 /* MX28_PAD_SSP2_SS0__SSP2_D3 */
 638                                         >;
 639                                         fsl,drive-strength = <1>;
 640                                         fsl,voltage = <1>;
 641                                         fsl,pull-up = <1>;
 642                                 };
 643
 644                                 usbphy0_pins_a: usbphy0@0 {
 645                                         reg = <0>;
 646                                         fsl,pinmux-ids = <
 647                                                 0x2152 /* MX28_PAD_SSP2_SS2__USB0_OVERCURRENT */
 648                                         >;
 649                                         fsl,drive-strength = <2>;
 650                                         fsl,voltage = <1>;
 651                                         fsl,pull-up = <0>;
 652                                 };
 653
 654                                 usbphy0_pins_b: usbphy0@1 {
 655                                         reg = <1>;
 656                                         fsl,pinmux-ids = <
 657                                                 0x3061 /* MX28_PAD_AUART1_CTS__USB0_OVERCURRENT */
 658                                         >;
 659                                         fsl,drive-strength = <2>;
 660                                         fsl,voltage = <1>;
 661                                         fsl,pull-up = <0>;
 662                                 };
 663
 664                                 usbphy1_pins_a: usbphy1@0 {
 665                                         reg = <0>;
 666                                         fsl,pinmux-ids = <
 667                                                 0x2142 /* MX28_PAD_SSP2_SS1__USB1_OVERCURRENT */
 668                                         >;
 669                                         fsl,drive-strength = <2>;
 670                                         fsl,voltage = <1>;
 671                                         fsl,pull-up = <0>;
 672                                 };
 673                         };
 674
 675                         digctl@8001c000 {
 676                                 compatible = "fsl,imx28-digctl";
 677                                 reg = <0x8001c000 0x2000>;
 678                                 interrupts = <89>;
 679                                 status = "disabled";
 680                         };
 681
 682                         etm@80022000 {
 683                                 reg = <0x80022000 0x2000>;
 684                                 status = "disabled";
 685                         };
 686
 687                         dma_apbx: dma-apbx@80024000 {
 688                                 compatible = "fsl,imx28-dma-apbx";
 689                                 reg = <0x80024000 0x2000>;
 690                                 interrupts = <78 79 66 0
 691                                               80 81 68 69
 692                                               70 71 72 73
 693                                               74 75 76 77>;
 694                                 interrupt-names = "auart4-rx", "aurat4-tx", "spdif-tx", "empty",
 695                                                   "saif0", "saif1", "i2c0", "i2c1",
 696                                                   "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
 697                                                   "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";
 698                                 #dma-cells = <1>;
 699                                 dma-channels = <16>;
 700                                 clocks = <&clks 26>;
 701                         };
 702
 703                         dcp@80028000 {
 704                                 reg = <0x80028000 0x2000>;
 705                                 interrupts = <52 53 54>;
 706                                 status = "disabled";
 707                         };
 708
 709                         pxp@8002a000 {
 710                                 reg = <0x8002a000 0x2000>;
 711                                 interrupts = <39>;
 712                                 status = "disabled";
 713                         };
 714
 715                         ocotp@8002c000 {
 716                                 compatible = "fsl,ocotp";
 717                                 reg = <0x8002c000 0x2000>;
 718                                 status = "disabled";
 719                         };
 720
 721                         axi-ahb@8002e000 {
 722                                 reg = <0x8002e000 0x2000>;
 723                                 status = "disabled";
 724                         };
 725
 726                         lcdif@80030000 {
 727                                 compatible = "fsl,imx28-lcdif";
 728                                 reg = <0x80030000 0x2000>;
 729                                 interrupts = <38 86>;
 730                                 clocks = <&clks 55>;
 731                                 dmas = <&dma_apbh 13>;
 732                                 dma-names = "rx";
 733                                 status = "disabled";
 734                         };
 735
 736                         can0: can@80032000 {
 737                                 compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
 738                                 reg = <0x80032000 0x2000>;
 739                                 interrupts = <8>;
 740                                 clocks = <&clks 58>, <&clks 58>;
 741                                 clock-names = "ipg", "per";
 742                                 status = "disabled";
 743                         };
 744
 745                         can1: can@80034000 {
 746                                 compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
 747                                 reg = <0x80034000 0x2000>;
 748                                 interrupts = <9>;
 749                                 clocks = <&clks 59>, <&clks 59>;
 750                                 clock-names = "ipg", "per";
 751                                 status = "disabled";
 752                         };
 753
 754                         simdbg@8003c000 {
 755                                 reg = <0x8003c000 0x200>;
 756                                 status = "disabled";
 757                         };
 758
 759                         simgpmisel@8003c200 {
 760                                 reg = <0x8003c200 0x100>;
 761                                 status = "disabled";
 762                         };
 763
 764                         simsspsel@8003c300 {
 765                                 reg = <0x8003c300 0x100>;
 766                                 status = "disabled";
 767                         };
 768
 769                         simmemsel@8003c400 {
 770                                 reg = <0x8003c400 0x100>;
 771                                 status = "disabled";
 772                         };
 773
 774                         gpiomon@8003c500 {
 775                                 reg = <0x8003c500 0x100>;
 776                                 status = "disabled";
 777                         };
 778
 779                         simenet@8003c700 {
 780                                 reg = <0x8003c700 0x100>;
 781                                 status = "disabled";
 782                         };
 783
 784                         armjtag@8003c800 {
 785                                 reg = <0x8003c800 0x100>;
 786                                 status = "disabled";
 787                         };
 788                 };
 789
 790                 apbx@80040000 {
 791                         compatible = "simple-bus";
 792                         #address-cells = <1>;
 793                         #size-cells = <1>;
 794                         reg = <0x80040000 0x40000>;
 795                         ranges;
 796
 797                         clks: clkctrl@80040000 {
 798                                 compatible = "fsl,imx28-clkctrl", "fsl,clkctrl";
 799                                 reg = <0x80040000 0x2000>;
 800                                 #clock-cells = <1>;
 801                         };
 802
 803                         saif0: saif@80042000 {
 804                                 compatible = "fsl,imx28-saif";
 805                                 reg = <0x80042000 0x2000>;
 806                                 interrupts = <59 80>;
 807                                 clocks = <&clks 53>;
 808                                 dmas = <&dma_apbx 4>;
 809                                 dma-names = "rx-tx";
 810                                 fsl,saif-dma-channel = <4>;
 811                                 status = "disabled";
 812                         };
 813
 814                         power@80044000 {
 815                                 reg = <0x80044000 0x2000>;
 816                                 status = "disabled";
 817                         };
 818
 819                         saif1: saif@80046000 {
 820                                 compatible = "fsl,imx28-saif";
 821                                 reg = <0x80046000 0x2000>;
 822                                 interrupts = <58 81>;
 823                                 clocks = <&clks 54>;
 824                                 dmas = <&dma_apbx 5>;
 825                                 dma-names = "rx-tx";
 826                                 fsl,saif-dma-channel = <5>;
 827                                 status = "disabled";
 828                         };
 829
 830                         lradc@80050000 {
 831                                 compatible = "fsl,imx28-lradc";
 832                                 reg = <0x80050000 0x2000>;
 833                                 interrupts = <10 14 15 16 17 18 19
 834                                                 20 21 22 23 24 25>;
 835                                 status = "disabled";
 836                         };
 837
 838                         spdif@80054000 {
 839                                 reg = <0x80054000 0x2000>;
 840                                 interrupts = <45 66>;
 841                                 dmas = <&dma_apbx 2>;
 842                                 dma-names = "tx";
 843                                 status = "disabled";
 844                         };
 845
 846                         rtc@80056000 {
 847                                 compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
 848                                 reg = <0x80056000 0x2000>;
 849                                 interrupts = <29>;
 850                         };
 851
 852                         i2c0: i2c@80058000 {
 853                                 #address-cells = <1>;
 854                                 #size-cells = <0>;
 855                                 compatible = "fsl,imx28-i2c";
 856                                 reg = <0x80058000 0x2000>;
 857                                 interrupts = <111 68>;
 858                                 clock-frequency = <100000>;
 859                                 dmas = <&dma_apbx 6>;
 860                                 dma-names = "rx-tx";
 861                                 fsl,i2c-dma-channel = <6>;
 862                                 status = "disabled";
 863                         };
 864
 865                         i2c1: i2c@8005a000 {
 866                                 #address-cells = <1>;
 867                                 #size-cells = <0>;
 868                                 compatible = "fsl,imx28-i2c";
 869                                 reg = <0x8005a000 0x2000>;
 870                                 interrupts = <110 69>;
 871                                 clock-frequency = <100000>;
 872                                 dmas = <&dma_apbx 7>;
 873                                 dma-names = "rx-tx";
 874                                 fsl,i2c-dma-channel = <7>;
 875                                 status = "disabled";
 876                         };
 877
 878                         pwm: pwm@80064000 {
 879                                 compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
 880                                 reg = <0x80064000 0x2000>;
 881                                 clocks = <&clks 44>;
 882                                 #pwm-cells = <2>;
 883                                 fsl,pwm-number = <8>;
 884                                 status = "disabled";
 885                         };
 886
 887                         timrot@80068000 {
 888                                 compatible = "fsl,imx28-timrot", "fsl,timrot";
 889                                 reg = <0x80068000 0x2000>;
 890                                 interrupts = <48 49 50 51>;
 891                                 clocks = <&clks 26>;
 892                         };
 893
 894                         auart0: serial@8006a000 {
 895                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 896                                 reg = <0x8006a000 0x2000>;
 897                                 interrupts = <112 70 71>;
 898                                 dmas = <&dma_apbx 8>, <&dma_apbx 9>;
 899                                 dma-names = "rx", "tx";
 900                                 fsl,auart-dma-channel = <8 9>;
 901                                 clocks = <&clks 45>;
 902                                 status = "disabled";
 903                         };
 904
 905                         auart1: serial@8006c000 {
 906                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 907                                 reg = <0x8006c000 0x2000>;
 908                                 interrupts = <113 72 73>;
 909                                 dmas = <&dma_apbx 10>, <&dma_apbx 11>;
 910                                 dma-names = "rx", "tx";
 911                                 clocks = <&clks 45>;
 912                                 status = "disabled";
 913                         };
 914
 915                         auart2: serial@8006e000 {
 916                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 917                                 reg = <0x8006e000 0x2000>;
 918                                 interrupts = <114 74 75>;
 919                                 dmas = <&dma_apbx 12>, <&dma_apbx 13>;
 920                                 dma-names = "rx", "tx";
 921                                 clocks = <&clks 45>;
 922                                 status = "disabled";
 923                         };
 924
 925                         auart3: serial@80070000 {
 926                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 927                                 reg = <0x80070000 0x2000>;
 928                                 interrupts = <115 76 77>;
 929                                 dmas = <&dma_apbx 14>, <&dma_apbx 15>;
 930                                 dma-names = "rx", "tx";
 931                                 clocks = <&clks 45>;
 932                                 status = "disabled";
 933                         };
 934
 935                         auart4: serial@80072000 {
 936                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 937                                 reg = <0x80072000 0x2000>;
 938                                 interrupts = <116 78 79>;
 939                                 dmas = <&dma_apbx 0>, <&dma_apbx 1>;
 940                                 dma-names = "rx", "tx";
 941                                 clocks = <&clks 45>;
 942                                 status = "disabled";
 943                         };
 944
 945                         duart: serial@80074000 {
 946                                 compatible = "arm,pl011", "arm,primecell";
 947                                 reg = <0x80074000 0x1000>;
 948                                 interrupts = <47>;
 949                                 clocks = <&clks 45>, <&clks 26>;
 950                                 clock-names = "uart", "apb_pclk";
 951                                 status = "disabled";
 952                         };
 953
 954                         usbphy0: usbphy@8007c000 {
 955                                 compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
 956                                 reg = <0x8007c000 0x2000>;
 957                                 clocks = <&clks 62>;
 958                                 status = "disabled";
 959                         };
 960
 961                         usbphy1: usbphy@8007e000 {
 962                                 compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
 963                                 reg = <0x8007e000 0x2000>;
 964                                 clocks = <&clks 63>;
 965                                 status = "disabled";
 966                         };
 967                 };
 968         };
 969
 970         ahb@80080000 {
 971                 compatible = "simple-bus";
 972                 #address-cells = <1>;
 973                 #size-cells = <1>;
 974                 reg = <0x80080000 0x80000>;
 975                 ranges;
 976
 977                 usb0: usb@80080000 {
 978                         compatible = "fsl,imx28-usb", "fsl,imx27-usb";
 979                         reg = <0x80080000 0x10000>;
 980                         interrupts = <93>;
 981                         clocks = <&clks 60>;
 982                         fsl,usbphy = <&usbphy0>;
 983                         status = "disabled";
 984                 };
 985
 986                 usb1: usb@80090000 {
 987                         compatible = "fsl,imx28-usb", "fsl,imx27-usb";
 988                         reg = <0x80090000 0x10000>;
 989                         interrupts = <92>;
 990                         clocks = <&clks 61>;
 991                         fsl,usbphy = <&usbphy1>;
 992                         status = "disabled";
 993                 };
 994
 995                 dflpt@800c0000 {
 996                         reg = <0x800c0000 0x10000>;
 997                         status = "disabled";
 998                 };
 999
1000                 mac0: ethernet@800f0000 {
1001                         compatible = "fsl,imx28-fec";
1002                         reg = <0x800f0000 0x4000>;
1003                         interrupts = <101>;
1004                         clocks = <&clks 57>, <&clks 57>, <&clks 64>;
1005                         clock-names = "ipg", "ahb", "enet_out";
1006                         status = "disabled";
1007                 };
1008
1009                 mac1: ethernet@800f4000 {
1010                         compatible = "fsl,imx28-fec";
1011                         reg = <0x800f4000 0x4000>;
1012                         interrupts = <102>;
1013                         clocks = <&clks 57>, <&clks 57>;
1014                         clock-names = "ipg", "ahb";
1015                         status = "disabled";
1016                 };
1017
1018                 switch@800f8000 {
1019                         reg = <0x800f8000 0x8000>;
1020                         status = "disabled";
1021                 };
1022
1023         };
1024 };