arch/arm/boot/dts/at91sam9263ek.dts

   1 /*
   2  * at91sam9263ek.dts - Device Tree file for Atmel at91sam9263 reference board
   3  *
   4  *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
   5  *
   6  * Licensed under GPLv2 only
   7  */
   8 /dts-v1/;
   9 #include "at91sam9263.dtsi"
  10
  11 / {
  12         model = "Atmel at91sam9263ek";
  13         compatible = "atmel,at91sam9263ek", "atmel,at91sam9263", "atmel,at91sam9";
  14
  15         chosen {
  16                 bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs";
  17                 stdout-path = "serial0:115200n8";
  18         };
  19
  20         memory {
  21                 reg = <0x20000000 0x4000000>;
  22         };
  23
  24         clocks {
  25                 slow_xtal {
  26                         clock-frequency = <32768>;
  27                 };
  28
  29                 main_xtal {
  30                         clock-frequency = <16367660>;
  31                 };
  32         };
  33
  34         ahb {
  35                 apb {
  36                         dbgu: serial@ffffee00 {
  37                                 status = "okay";
  38                         };
  39
  40                         usart0: serial@fff8c000 {
  41                                 pinctrl-0 = <
  42                                         &pinctrl_usart0
  43                                         &pinctrl_usart0_rts
  44                                         &pinctrl_usart0_cts>;
  45                                 status = "okay";
  46                         };
  47
  48                         macb0: ethernet@fffbc000 {
  49                                 phy-mode = "rmii";
  50                                 status = "okay";
  51                         };
  52
  53                         usb1: gadget@fff78000 {
  54                                 atmel,vbus-gpio = <&pioA 25 GPIO_ACTIVE_HIGH>;
  55                                 status = "okay";
  56                         };
  57
  58                         mmc0: mmc@fff80000 {
  59                                 pinctrl-0 = <
  60                                         &pinctrl_board_mmc0
  61                                         &pinctrl_mmc0_clk
  62                                         &pinctrl_mmc0_slot0_cmd_dat0
  63                                         &pinctrl_mmc0_slot0_dat1_3>;
  64                                 status = "okay";
  65                                 slot@0 {
  66                                         reg = <0>;
  67                                         bus-width = <4>;
  68                                         cd-gpios = <&pioE 18 GPIO_ACTIVE_HIGH>;
  69                                         wp-gpios = <&pioE 19 GPIO_ACTIVE_HIGH>;
  70                                 };
  71                         };
  72
  73                         pinctrl@fffff200 {
  74                                 mmc0 {
  75                                         pinctrl_board_mmc0: mmc0-board {
  76                                                 atmel,pins =
  77                                                         <AT91_PIOE 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH    /* PE18 gpio CD pin pull up and deglitch */
  78                                                          AT91_PIOE 19 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;   /* PE19 gpio WP pin pull up */
  79                                         };
  80                                 };
  81                         };
  82
  83                         spi0: spi@fffa4000 {
  84                                 status = "okay";
  85                                 cs-gpios = <&pioA 5 0>, <0>, <0>, <0>;
  86                                 mtd_dataflash@0 {
  87                                         compatible = "atmel,at45", "atmel,dataflash";
  88                                         spi-max-frequency = <50000000>;
  89                                         reg = <0>;
  90                                 };
  91                         };
  92
  93                         watchdog@fffffd40 {
  94                                 status = "okay";
  95                         };
  96                 };
  97
  98                 fb0: fb@0x00700000 {
  99                         display = <&display0>;
 100                         status = "okay";
 101
 102                         display0: display {
 103                                 bits-per-pixel = <16>;
 104                                 atmel,lcdcon-backlight;
 105                                 atmel,dmacon = <0x1>;
 106                                 atmel,lcdcon2 = <0x80008002>;
 107                                 atmel,guard-time = <1>;
 108
 109                                 display-timings {
 110                                         native-mode = <&timing0>;
 111                                         timing0: timing0 {
 112                                                 clock-frequency = <4965000>;
 113                                                 hactive = <240>;
 114                                                 vactive = <320>;
 115                                                 hback-porch = <1>;
 116                                                 hfront-porch = <33>;
 117                                                 vback-porch = <1>;
 118                                                 vfront-porch = <0>;
 119                                                 hsync-len = <5>;
 120                                                 vsync-len = <1>;
 121                                                 hsync-active = <1>;
 122                                                 vsync-active = <1>;
 123                                         };
 124                                 };
 125                         };
 126                 };
 127
 128                 nand0: nand@40000000 {
 129                         nand-bus-width = <8>;
 130                         nand-ecc-mode = "soft";
 131                         nand-on-flash-bbt = <1>;
 132                         status = "okay";
 133
 134                         at91bootstrap@0 {
 135                                 label = "at91bootstrap";
 136                                 reg = <0x0 0x20000>;
 137                         };
 138
 139                         barebox@20000 {
 140                                 label = "barebox";
 141                                 reg = <0x20000 0x40000>;
 142                         };
 143
 144                         bareboxenv@60000 {
 145                                 label = "bareboxenv";
 146                                 reg = <0x60000 0x20000>;
 147                         };
 148
 149                         bareboxenv2@80000 {
 150                                 label = "bareboxenv2";
 151                                 reg = <0x80000 0x20000>;
 152                         };
 153
 154                         oftree@80000 {
 155                                 label = "oftree";
 156                                 reg = <0xa0000 0x20000>;
 157                         };
 158
 159                         kernel@a0000 {
 160                                 label = "kernel";
 161                                 reg = <0xc0000 0x400000>;
 162                         };
 163
 164                         rootfs@4a0000 {
 165                                 label = "rootfs";
 166                                 reg = <0x4c0000 0x7800000>;
 167                         };
 168
 169                         data@7ca0000 {
 170                                 label = "data";
 171                                 reg = <0x7cc0000 0x8340000>;
 172                         };
 173                 };
 174
 175                 usb0: ohci@00a00000 {
 176                         num-ports = <2>;
 177                         status = "okay";
 178                         atmel,vbus-gpio = <&pioA 24 GPIO_ACTIVE_HIGH
 179                                            &pioA 21 GPIO_ACTIVE_HIGH
 180                                           >;
 181                 };
 182         };
 183
 184         leds {
 185                 compatible = "gpio-leds";
 186
 187                 d3 {
 188                         label = "d3";
 189                         gpios = <&pioB 7 GPIO_ACTIVE_HIGH>;
 190                         linux,default-trigger = "heartbeat";
 191                 };
 192
 193                 d2 {
 194                         label = "d2";
 195                         gpios = <&pioC 29 GPIO_ACTIVE_LOW>;
 196                         linux,default-trigger = "nand-disk";
 197                 };
 198         };
 199
 200         gpio_keys {
 201                 compatible = "gpio-keys";
 202
 203                 left_click {
 204                         label = "left_click";
 205                         gpios = <&pioC 5 GPIO_ACTIVE_LOW>;
 206                         linux,code = <272>;
 207                         wakeup-source;
 208                 };
 209
 210                 right_click {
 211                         label = "right_click";
 212                         gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
 213                         linux,code = <273>;
 214                         wakeup-source;
 215                 };
 216         };
 217
 218         i2c@0 {
 219                 status = "okay";
 220
 221                 24c512@50 {
 222                         compatible = "24c512";
 223                         reg = <0x50>;
 224                         pagesize = <128>;
 225                 };
 226         };
 227 };