sur40: fix occasional oopses on device close

commit 6a8588156657e607fcfdffd46c1daae8ba88a1e5 upstream.

Closing the V4L2 device sometimes triggers a kernel oops.
Present patch fixes this.

Signed-off-by: Martin Kaltenbrunner <modin@yuri.at>
Signed-off-by: Florian Echtler <floe@butterbrot.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sur40: lower poll interval to fix occasional FPS drops to ~56 FPS

commit af766ee005c496b8567976dc3eed7676443ed6de upstream.

The framerate sometimes drops below 60 Hz if the poll interval is too high.
Lowering it to the minimum of 1 ms fixes this.

Signed-off-by: Martin Kaltenbrunner <modin@yuri.at>
Signed-off-by: Florian Echtler <floe@butterbrot.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix RC5 decoding with Fintek CIR chipset

commit bbdb34c90aeb8b2253eae88029788ebe1d7f2fd4 upstream.

Fix RC5 decoding with Fintek CIR chipset

Commit e87b540be2dd02552fb9244d50ae8b4e4619a34b tightened up the RC5
decoding by adding a check for trailing silence to ensure a valid RC5
command had been received. Unfortunately the trailer length checked was
10 units and the Fintek CIR device does not want to provide details of a
space longer than 6350us. This meant that RC5 remotes working on a
Fintek setup on 3.16 failed on 3.17 and later. Fix this by shortening
the trailer check to 6 units (allowing for a previous space in the
received remote command).

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=117221

Signed-off-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vb2: core: Skip planes array verification if pb is NULL

commit 126f40298446a82116e1f92a1aaf72b8c8228fae upstream.

An earlier patch fixing an input validation issue introduced another
issue: vb2_core_dqbuf() is called with pb argument value NULL in some
cases, causing a NULL pointer dereference. Fix this by skipping the
verification as there's nothing to verify.

Fixes: e7e0c3e26587 ("[media] videobuf2-core: Check user space planes array in dqbuf")
Signed-off-by: David R <david@unsolicited.net>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

videobuf2-v4l2: Verify planes array in buffer dequeueing

commit 83934b75c368f529d084815c463a7ef781dc9751 upstream.

When a buffer is being dequeued using VIDIOC_DQBUF IOCTL, the exact buffer
which will be dequeued is not known until the buffer has been removed from
the queue. The number of planes is specific to a buffer, not to the queue.

This does lead to the situation where multi-plane buffers may be requested
and queued with n planes, but VIDIOC_DQBUF IOCTL may be passed an argument
struct with fewer planes.

__fill_v4l2_buffer() however uses the number of planes from the dequeued
videobuf2 buffer, overwriting kernel memory (the m.planes array allocated
in video_usercopy() in v4l2-ioctl.c)  if the user provided fewer
planes than the dequeued buffer had. Oops!

Fixes: b0e0e1f83de3 ("[media] media: videobuf2: Prepare to divide videobuf2")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: dvb_ringbuffer: Add memory barriers

commit ca6e6126db5494f18c6c6615060d4d803b528bff upstream.

Implement memory barriers according to Documentation/circular-buffers.txt:
- use smp_store_release() to update ringbuffer read/write pointers
- use smp_load_acquire() to load write pointer on reader side
- use ACCESS_ONCE() to load read pointer on writer side

This fixes data stream corruptions observed e.g. on an ARM Cortex-A9
quad core system with different types (PCI, USB) of DVB tuners.

Signed-off-by: Soeren Moch <smoch@web.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: usbtv: prevent access to free'd resources

commit 2a00932f082aff93c3a55426e0c7af6d0ec03997 upstream.

When disconnecting the usbtv device, the sound card is unregistered
from ALSA and the snd member of the usbtv struct is set to NULL.  If
the usbtv snd_trigger work is running, this can cause a race condition
where the kernel will attempt to access free'd resources, shown in
[1].

This patch fixes the disconnection code by cancelling any snd_trigger
work before unregistering the sound card from ALSA and checking that
the snd member still exists in the work function.

[1]:
 usb 3-1.2: USB disconnect, device number 6
 BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
 IP: [<ffffffff81093850>] process_one_work+0x30/0x480
 PGD 405bbf067 PUD 405bbe067 PMD 0
 Call Trace:
  [<ffffffff81093ce8>] worker_thread+0x48/0x4e0
  [<ffffffff81093ca0>] ? process_one_work+0x480/0x480
  [<ffffffff81093ca0>] ? process_one_work+0x480/0x480
  [<ffffffff81099998>] kthread+0xd8/0xf0
  [<ffffffff815c73c2>] ret_from_fork+0x22/0x40
  [<ffffffff810998c0>] ? kthread_worker_fn+0x170/0x170
 ---[ end trace 0f3dac5c1a38e610 ]---

Signed-off-by: Matthew Leach <matthew@mattleach.net>
Tested-by: Peter Sutton <foxxy@foxdogstudios.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mfd: qcom_rpm: Parametrize also ack selector size

commit f37be01e6dc606f2fcc5e95c9933d948ce19bd35 upstream.

The RPM has two sets of selectors (IPC bit fields): request and
acknowledge. Apparently, some models use 4*32 bit words for select
and some use 7*32 bit words for request, but all use 7*32 words
for acknowledge bits.

So apparently you can on the models with requests of 4*32 select
bits send 4*32 messages and get 7*32 different replies, so on ACK
interrupt, 7*32 bit words need to be read. This is how the vendor
code apparently works.

Reported-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mfd: qcom_rpm: Fix offset error for msm8660

commit 9835f1b70bb3890d38308b9be4fb9d7451ba67f1 upstream.

The RPM in MSM8660/APQ8060 has different offsets to the selector
ACK and request context ACK registers. Make all these register
offsets part of the per-SoC data and assign the right values.

The bug was found by verifying backwards to the vendor tree in
the out-of-tree files <mach/rpm-[8660|8064|8960]>: all were using
offsets 3,11,15,23 and a select size of 4, except the MSM8660/APQ8060
which was using offsets 3,11,19,27 and a select size of 7.

All other platforms apart from msm8660 were affected by reading
excess registers, since 7 was hardcoded as the number of select
words, this patch makes also this part dynamic so we only write/read
as many select words as the platform actually use.

Symptoms of this bug when using msm8660: the first RPM transaction
would work, but the next would stall or raise an error since the
previous transaction was not properly ACKed as the ACK words were
read at the wrong offset.

Fixes: 58e214382bdd ("mfd: qcom-rpm: Driver for the Qualcomm RPM")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Björn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

intel_pstate: Fix MSR_CONFIG_TDP_x addressing in core_get_max_pstate()

commit 5fc8f707a2aa40c767c3a338738b9b6fcd151ac1 upstream.

If MSR_CONFIG_TDP_CONTROL is locked, we currently try to address some
MSR 0x80000648 or so. Mask out the relevant level bits 0 and 1.

Found while running over the Jailhouse hypervisor which became upset
about this strange MSR index.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/cio: allow to reset channel measurement block

commit 0f5d050ceaa31b2229102211d60c149f920df3aa upstream.

Prior to commit 1bc6664bdfb949bc69a08113801e7d6acbf6bc3f a call to
enable_cmf for a device for which channel measurement was already
enabled resulted in a reset of the measurement data.

What looked like bugs at the time (a 2nd allocation was triggered
but failed, reset was called regardless of previous failures, and
errors have not been reported to userspace) was actually something
at least one userspace tool depended on. Restore that behavior in
a sane way.

Fixes: 1bc6664bdfb ("s390/cio: use device_lock during cmb activation")
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: nVMX: Fix memory corruption when using VMCS shadowing

commit 2f1fe81123f59271bddda673b60116bde9660385 upstream.

When freeing the nested resources of a vcpu, there is an assumption that
the vcpu's vmcs01 is the current VMCS on the CPU that executes
nested_release_vmcs12(). If this assumption is violated, the vcpu's
vmcs01 may be made active on multiple CPUs at the same time, in
violation of Intel's specification. Moreover, since the vcpu's vmcs01 is
not VMCLEARed on every CPU on which it is active, it can linger in a
CPU's VMCS cache after it has been freed and potentially
repurposed. Subsequent eviction from the CPU's VMCS cache on a capacity
miss can result in memory corruption.

It is not sufficient for vmx_free_vcpu() to call vmx_load_vmcs01(). If
the vcpu in question was last loaded on a different CPU, it must be
migrated to the current CPU before calling vmx_load_vmcs01().

Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: VMX: handle PML full VMEXIT that occurs during event delivery

commit b244c9fc251e14a083a1cbf04bef10bd99303a76 upstream.

With PML enabled, guest will shut down if a PML full VMEXIT occurs during
event delivery. According to Intel SDM 27.2.3, PML full VMEXIT can occur when
event is being delivered through IDT, so KVM should not exit to user space
with error. Instead, it should let EXIT_REASON_PML_FULL go through and the
event will be re-injected on the next VMENTRY.

Signed-off-by: Lei Cao <lei.cao@stratus.com>
Fixes: 843e4330573c ("KVM: VMX: Add PML support in VMX")
[Shortened the summary and Cc'd stable.]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: MTRR: fix kvm_mtrr_check_gfn_range_consistency page fault

commit 30b072ce0356e8b141f4ca6da7220486fa3641d9 upstream.

The following #PF may occurs:
[ 1403.317041] BUG: unable to handle kernel paging request at 0000000200000068
[ 1403.317045] IP: [<ffffffffc04c20b0>] __mtrr_lookup_var_next+0x10/0xa0 [kvm]

[ 1403.317123] Call Trace:
[ 1403.317134]  [<ffffffffc04c2a65>] ? kvm_mtrr_check_gfn_range_consistency+0xc5/0x120 [kvm]
[ 1403.317143]  [<ffffffffc04ac11f>] ? tdp_page_fault+0x9f/0x2c0 [kvm]
[ 1403.317152]  [<ffffffffc0498128>] ? kvm_set_msr_common+0x858/0xc00 [kvm]
[ 1403.317161]  [<ffffffffc04b8883>] ? x86_emulate_insn+0x273/0xd30 [kvm]
[ 1403.317171]  [<ffffffffc04c04e4>] ? kvm_cpuid+0x34/0x190 [kvm]
[ 1403.317180]  [<ffffffffc04a5bb9>] ? kvm_mmu_page_fault+0x59/0xe0 [kvm]
[ 1403.317183]  [<ffffffffc0d729e1>] ? vmx_handle_exit+0x1d1/0x14a0 [kvm_intel]
[ 1403.317185]  [<ffffffffc0d75f3f>] ? atomic_switch_perf_msrs+0x6f/0xa0 [kvm_intel]
[ 1403.317187]  [<ffffffffc0d7621d>] ? vmx_vcpu_run+0x2ad/0x420 [kvm_intel]
[ 1403.317196]  [<ffffffffc04a0962>] ? kvm_arch_vcpu_ioctl_run+0x622/0x1550 [kvm]
[ 1403.317204]  [<ffffffffc049abb9>] ? kvm_arch_vcpu_load+0x59/0x210 [kvm]
[ 1403.317206]  [<ffffffff81036245>] ? __kernel_fpu_end+0x35/0x100
[ 1403.317213]  [<ffffffffc0487eb6>] ? kvm_vcpu_ioctl+0x316/0x5d0 [kvm]
[ 1403.317215]  [<ffffffff81088225>] ? do_sigtimedwait+0xd5/0x220
[ 1403.317217]  [<ffffffff811f84dd>] ? do_vfs_ioctl+0x9d/0x5c0
[ 1403.317224]  [<ffffffffc04928ae>] ? kvm_on_user_return+0x3e/0x70 [kvm]
[ 1403.317225]  [<ffffffff811f8a74>] ? SyS_ioctl+0x74/0x80
[ 1403.317227]  [<ffffffff815bf0b6>] ? entry_SYSCALL_64_fastpath+0x1e/0xa8
[ 1403.317242] RIP  [<ffffffffc04c20b0>] __mtrr_lookup_var_next+0x10/0xa0 [kvm]

At mtrr_lookup_fixed_next(), when the condition
'if (iter->index >= ARRAY_SIZE(iter->mtrr_state->fixed_ranges))' becomes true,
mtrr_lookup_var_start() is called with iter->range with gargabe values from the
fixed MTRR union field. Then, list_prepare_entry() do not call list_entry()
initialization, keeping a garbage pointer in iter->range which is accessed in
the following __mtrr_lookup_var_next() call.

Fixes: f571c0973e4b8c888e049b6842e4b4f93b5c609c
Signed-off-by: Alexis Dambricourt <alexis@blade-group.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: PPC: Book3S HV: Save/restore TM state in H_CEDE

commit 93d17397e4e2182fdaad503e2f9da46202c0f1c3 upstream.

It turns out that if the guest does a H_CEDE while the CPU is in
a transactional state, and the H_CEDE does a nap, and the nap
loses the architected state of the CPU (which is is allowed to do),
then we lose the checkpointed state of the virtual CPU.  In addition,
the transactional-memory state recorded in the MSR gets reset back
to non-transactional, and when we try to return to the guest, we take
a TM bad thing type of program interrupt because we are trying to
transition from non-transactional to transactional with a hrfid
instruction, which is not permitted.

The result of the program interrupt occurring at that point is that
the host CPU will hang in an infinite loop with interrupts disabled.
Thus this is a denial of service vulnerability in the host which can
be triggered by any guest (and depending on the guest kernel, it can
potentially triggered by unprivileged userspace in the guest).

This vulnerability has been assigned the ID CVE-2016-5412.

To fix this, we save the TM state before napping and restore it
on exit from the nap, when handling a H_CEDE in real mode.  The
case where H_CEDE exits to host virtual mode is already OK (as are
other hcalls which exit to host virtual mode) because the exit
path saves the TM state.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: PPC: Book3S HV: Pull out TM state save/restore into separate procedures

commit f024ee098476a3e620232e4a78cfac505f121245 upstream.

This moves the transactional memory state save and restore sequences
out of the guest entry/exit paths into separate procedures.  This is
so that these sequences can be used in going into and out of nap
in a subsequent patch.

The only code changes here are (a) saving and restore LR on the
stack, since these new procedures get called with a bl instruction,
(b) explicitly saving r1 into the PACA instead of assuming that
HSTATE_HOST_R1(r13) is already set, and (c) removing an unnecessary
and redundant setting of MSR[TM] that should have been removed by
commit 9d4d0bdd9e0a ("KVM: PPC: Book3S HV: Add transactional memory
support", 2013-09-24) but wasn't.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: mm: avoid fdt_check_header() before the FDT is fully mapped

commit 04a848106193b134741672f7e4e444b50c70b631 upstream.

As reported by Zijun, the fdt_check_header() call in __fixmap_remap_fdt()
is not safe since it is not guaranteed that the FDT header is mapped
completely. Due to the minimum alignment of 8 bytes, the only fields we
can assume to be mapped are 'magic' and 'totalsize'.

Since the OF layer is in charge of validating the FDT image, and we are
only interested in making reasonably sure that the size field contains
a meaningful value, replace the fdt_check_header() call with an explicit
comparison of the magic field's value against the expected value.

Reported-by: Zijun Hu <zijun_hu@htc.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: rockchip: fixes the gic400 2nd region size for rk3368

commit ad1cfdf518976447e6b0d31517bad4e3ebbce6bb upstream.

The 2nd additional region is the GIC virtual cpu interface register
base and size.

As the gic400 of rk3368 says, the cpu interface register map as below

:

-0x0000 GICC_CTRL
.
.
.
-0x00fc GICC_IIDR
-0x1000 GICC_IDR

Obviously, the region size should be greater than 0x1000.
So we should make sure to include the GICC_IDR since the kernel will access
it in some cases.

Fixes: b790c2cab5ca ("arm64: dts: add Rockchip rk3368 core dtsi and board dts for the r88 board")
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[added Fixes and stable-cc]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

pinctrl: cherryview: prevent concurrent access to GPIO controllers

commit 0bd50d719b004110e791800450ad204399100a86 upstream.

Due to a silicon issue on the Atom X5-Z8000 "Cherry Trail" processor
series, a common lock must be used to prevent concurrent accesses
across the 4 GPIO controllers managed by this driver.

See Intel Atom Z8000 Processor Series Specification Update
(Rev. 005), errata #CHT34, for further information.

Signed-off-by: Dan O'Donovan <dan@emutex.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: hci_intel: Fix null gpio desc pointer dereference

commit 32b9ccbc3522811c0e483637b85ae25f5491296f upstream.

gpiod_get_optional can return either ERR_PTR or NULL pointer.
NULL case is not tested and then dereferenced later in desc_to_gpio.
Fix this by using non optional version which returns ERR_PTR in any
error case (this is not an optional gpio).
Use the same non optional version for the host-wake gpio.

Fixes: 765ea3abd116 ("Bluetooth: hci_intel: Retrieve host-wake IRQ")
Signed-off-by: Loic Poulain <loic.poulain@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: intel-mid: Remove potentially harmful code

commit 3dbd3212f81b2b410a34a922055e2da792864829 upstream.

The commit d56d6b3d7d69 ("gpio: langwell: add Intel Merrifield support")
doesn't look at all as a proper support for Intel Merrifield and I dare to say
that it distorts the behaviour of the hardware.

The register map is different on Intel Merrifield, i.e. only 6 out of 8
register have the same purpose but none of them has same location in the
address space. The current case potentially harmful to existing hardware since
it's poking registers on wrong offsets and may set some pin to be GPIO output
when connected hardware doesn't expect such.

Besides the above GPIO and pinctrl on Intel Merrifield have been located in
different IP blocks. The functionality has been extended as well, i.e. added
support of level interrupts, special registers for wake capable sources and
thus, in my opinion, requires a completele separate driver.

If someone wondering the existing gpio-intel-mid.c would be converted to actual
pinctrl (which by the fact it is now), though I wouldn't be a volunteer to do
that.

Fixes: d56d6b3d7d69 ("gpio: langwell: add Intel Merrifield support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: pca953x: Fix NBANK calculation for PCA9536

commit a246b8198f776a16d1d3a3bbfc2d437bad766b29 upstream.

NBANK() macro assumes that ngpios is a multiple of 8(BANK_SZ) and
hence results in 0 banks for PCA9536 which has just 4 gpios. This is
wrong as PCA9356 has 1 bank with 4 gpios. This results in uninitialized
PCA953X_INVERT register. Fix this by using DIV_ROUND_UP macro in
NBANK().

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty/serial: atmel: fix RS485 half duplex with DMA

commit 0058f0871efe7b01c6f2b3046c68196ab73e96da upstream.

When using DMA, half duplex doesn't work properly because rx is not stopped
before starting tx. Ensure we call atmel_stop_rx() in the DMA case.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: samsung: Fix ERR pointer dereference on deferred probe

commit e51e4d8a185de90424b03f30181b35f29c46a25a upstream.

When the clk_get() of "uart" clock returns EPROBE_DEFER, the next re-probe
finishes with success but uses invalid (ERR_PTR) values.  This leads to
dereferencing of ERR_PTR stored under ourport->clk:

12c30000.serial: Controller clock not found
(...)
12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 61, base_baud = 0) is a S3C6400/10
Unable to handle kernel paging request at virtual address fffffdfb

(clk_prepare) from [<c039f7d0>] (s3c24xx_serial_pm+0x20/0x128)
(s3c24xx_serial_pm) from [<c0395414>] (uart_change_pm+0x38/0x40)
(uart_change_pm) from [<c039689c>] (uart_add_one_port+0x31c/0x44c)
(uart_add_one_port) from [<c03a035c>] (s3c24xx_serial_probe+0x2a8/0x418)
(s3c24xx_serial_probe) from [<c03ee110>] (platform_drv_probe+0x50/0xb0)
(platform_drv_probe) from [<c03ecb44>] (driver_probe_device+0x1f4/0x2b0)
(driver_probe_device) from [<c03eb0c0>] (bus_for_each_drv+0x44/0x8c)
(bus_for_each_drv) from [<c03ec8c8>] (__device_attach+0x9c/0x100)
(__device_attach) from [<c03ebf54>] (bus_probe_device+0x84/0x8c)
(bus_probe_device) from [<c03ec388>] (deferred_probe_work_func+0x60/0x8c)
(deferred_probe_work_func) from [<c012fee4>] (process_one_work+0x120/0x328)
(process_one_work) from [<c0130150>] (worker_thread+0x2c/0x4ac)
(worker_thread) from [<c0135320>] (kthread+0xd8/0xf4)
(kthread) from [<c0107978>] (ret_from_fork+0x14/0x3c)

The first unsuccessful clk_get() causes s3c24xx_serial_init_port() to
exit with failure but the s3c24xx_uart_port is left half-configured
(e.g. port->mapbase is set, clk contains ERR_PTR).  On next re-probe,
the function s3c24xx_serial_init_port() will exit early with success
because of configured port->mapbase and driver will use old values,
including the ERR_PTR as clock.

Fix this by cleaning the port->mapbase on error path so each re-probe
will initialize all of the port settings.

Fixes: 60e93575476f ("serial: samsung: enable clock before clearing pending interrupts during init")
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: serial: msm: Don't read off end of tx fifo

commit 30acf549ca1e81859a67590ab9ecfce3d1050a0b upstream.

For dm uarts in pio mode tx data is transferred to the fifo register 4
bytes at a time, but care is not taken when these 4 bytes spans the end
of the xmit buffer so the loop might read up to 3 bytes past the buffer
and then skip the actual data at the beginning of the buffer.

Fix this by, analogous to the DMA case, make sure the chunk doesn't
wrap the xmit buffer.

Fixes: 3a878c430fd6 ("tty: serial: msm: Add TX DMA support")
Cc: Ivan Ivanov <iivanov.xz@gmail.com>
Reported-by: Frank Rowand <frowand.list@gmail.com>
Reported-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Andy Gross <andy.gross@linaro.org>
Tested-by: Frank Rowand <frank.rowand@am.sony.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Fix incorrect per-cpu usage for boot CPU

commit 9113c2aa05e9848cd4f1154abee17d4f265f012d upstream.

In smp_prepare_boot_cpu(), we invoke cpuinfo_store_boot_cpu to  store
the cpuinfo in a per-cpu ptr, before initialising the per-cpu offset for
the boot CPU. This patch reorders the sequence to make sure we initialise
the per-cpu offset before accessing the per-cpu area.

Commit 4b998ff1885eec ("arm64: Delay cpuinfo_store_boot_cpu") fixed the
issue where we modified the per-cpu area even before the kernel initialises
the per-cpu areas, but failed to wait until the boot cpu updated it's
offset.

Fixes: 4b998ff1885e ("arm64: Delay cpuinfo_store_boot_cpu")
Cc: <stable@vger.kernel.org> # 4.4+
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: debug: unmask PSTATE.D earlier

commit 2ce39ad15182604beb6c8fa8bed5e46b59fd1082 upstream.

Clearing PSTATE.D is one of the requirements for generating a debug
exception. The arm64 booting protocol requires that PSTATE.D is set,
since many of the debug registers (for example, the hw_breakpoint
registers) are UNKNOWN out of reset and could potentially generate
spurious, fatal debug exceptions in early boot code if PSTATE.D was
clear. Once the debug registers have been safely initialised, PSTATE.D
is cleared, however this is currently broken for two reasons:

(1) The boot CPU clears PSTATE.D in a postcore_initcall and secondary
    CPUs clear PSTATE.D in secondary_start_kernel. Since the initcall
    runs after SMP (and the scheduler) have been initialised, there is
    no guarantee that it is actually running on the boot CPU. In this
    case, the boot CPU is left with PSTATE.D set and is not capable of
    generating debug exceptions.

(2) In a preemptible kernel, we may explicitly schedule on the IRQ
    return path to EL1. If an IRQ occurs with PSTATE.D set in the idle
    thread, then we may schedule the kthread_init thread, run the
    postcore_initcall to clear PSTATE.D and then context switch back
    to the idle thread before returning from the IRQ. The exception
    return path will then restore PSTATE.D from the stack, and set it
    again.

This patch fixes the problem by moving the clearing of PSTATE.D earlier
to proc.S. This has the desirable effect of clearing it in one place for
all CPUs, long before we have to worry about the scheduler or any
exception handling. We ensure that the previous reset of MDSCR_EL1 has
completed before unmasking the exception, so that any spurious
exceptions resulting from UNKNOWN debug registers are not generated.

Without this patch applied, the kprobes selftests have been seen to fail
under KVM, where we end up attempting to step the OOL instruction buffer
with PSTATE.D set and therefore fail to complete the step.

Acked-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: kernel: Save and restore UAO and addr_limit on exception entry

commit e19a6ee2460bdd0d0055a6029383422773f9999a upstream.

If we take an exception while at EL1, the exception handler inherits
the original context's addr_limit and PSTATE.UAO values. To be consistent
always reset addr_limit and PSTATE.UAO on (re-)entry to EL1. This
prevents accidental re-use of the original context's addr_limit.

Based on a similar patch for arm from Russell King.

Cc: <stable@vger.kernel.org> # 4.6-
Acked-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
[ backport to stop perf misusing inherited addr_limit.
  Removed code interacting with UAO and the irqstack ]
Link: https://bugs.chromium.org/p/project-zero/issues/detail?id=822
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: usbfs: fix potential infoleak in devio

commit 681fef8380eb818c0b845fca5d2ab1dcbab114ee upstream.

The stack object “ci” has a total size of 8 bytes. Its last 3 bytes
are padding bytes which are not initialized and leaked to userland
via “copy_to_user”.

Signed-off-by: Kangjie Lu <kjlu@gatech.edu>
Signed-off-by: Chas Williams <ciwillia@brocade.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: renesas_usbhs: fix NULL pointer dereference in xfer_work()

commit 4fdef698383db07d829da567e0e405fc41ff3a89 upstream.

This patch fixes an issue that the xfer_work() is possible to cause
NULL pointer dereference if the usb cable is disconnected while data
transfer is running.

In such case, a gadget driver may call usb_ep_disable()) before
xfer_work() is actually called. In this case, the usbhs_pkt_pop()
will call usbhsf_fifo_unselect(), and then usbhs_pipe_to_fifo()
in xfer_work() will return NULL.

Fixes: e73a989 ("usb: renesas_usbhs: add DMAEngine support")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: option: add support for Telit LE910 PID 0x1206

commit 3c0415fa08548e3bc63ef741762664497ab187ed upstream.

This patch adds support for 0x1206 PID of Telit LE910.

Since the interfaces positions are the same than the ones for
0x1043 PID of Telit LE922, telit_le922_blacklist_usbcfg3 is used.

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: fix for the isoc transfer EP_BUSY flag

commit 9cad39fe4e4a4fe95d8ea5a7b0692b0a6e89e38b upstream.

commit f3af36511e60 ("usb: dwc3: gadget: always
enable IOC on bulk/interrupt transfers") ended up
regressing Isochronous endpoints by clearing
DWC3_EP_BUSY flag too early, which resulted in
choppy audio playback over USB.

Fix that by partially reverting original commit and
making sure that we check for isochronous endpoints.

Fixes: f3af36511e60 ("usb: dwc3: gadget: always enable IOC
on bulk/interrupt transfers")
Signed-off-by: Konrad Leszczynski <konrad.leszczynski@intel.com>
Signed-off-by: Rafal Redzimski <rafal.f.redzimski@intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: quirks: Add no-lpm quirk for Elan

commit 25b1f9acc452209ae0fcc8c1332be852b5c52f53 upstream.

BugLink: http://bugs.launchpad.net/bugs/1498667
As reported in BugLink, this device has an issue with Linux Power
Management so adding a quirk.  This quirk was reccomended by Alan Stern:

http://lkml.iu.edu/hypermail/linux/kernel/1606.2/05590.html

Signed-off-by: Joseph Salisbury <joseph.salisbury@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: renesas_usbhs: protect the CFIFOSEL setting in usbhsg_ep_enable()

commit 15e4292a2d21e9997fdb2b8c014cc461b3f268f0 upstream.

This patch fixes an issue that the CFIFOSEL register value is possible
to be changed by usbhsg_ep_enable() wrongly. And then, a data transfer
using CFIFO may not work correctly.

For example:
 # modprobe g_multi file=usb-storage.bin
 # ifconfig usb0 192.168.1.1 up
 (During the USB host is sending file to the mass storage)
 # ifconfig usb0 down

In this case, since the u_ether.c may call usb_ep_enable() in
eth_stop(), if the renesas_usbhs driver is also using CFIFO for
mass storage, the mass storage may not work correctly.

So, this patch adds usbhs_lock() and usbhs_unlock() calling in
usbhsg_ep_enable() to protect CFIFOSEL register. This is because:
 - CFIFOSEL.CURPIPE = 0 is also needed for the pipe configuration
 - The CFIFOSEL (fifo->sel) is already protected by usbhs_lock()

Fixes: 97664a207bc2 ("usb: renesas_usbhs: shrink spin lock area")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: f_fs: off by one bug in _ffs_func_bind()

commit 0015f9156092d07b3ec06d37d014328419d5832e upstream.

This loop is supposed to set all the .num[] values to -1 but it's off by
one so it skips the first element and sets one element past the end of
the array.

I've cleaned up the loop a little as well.

Fixes: ddf8abd25994 ('USB: f_fs: the FunctionFS driver')
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: avoid exposing kernel stack

commit ffeee83aa0461992e8a99a59db2df31933e60362 upstream.

Function in_rq_cur copies random bytes from the stack.
Zero the memory instead.

Fixes: 132fcb460839 ("usb: gadget: Add Audio Class 2.0 Driver")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.4.18

mm: memcontrol: fix memcg id ref counter on swap charge move

commit 615d66c37c755c49ce022c9e5ac0875d27d2603d upstream.

Since commit 73f576c04b94 ("mm: memcontrol: fix cgroup creation failure
after many small jobs") swap entries do not pin memcg->css.refcnt
directly.  Instead, they pin memcg->id.ref.  So we should adjust the
reference counters accordingly when moving swap charges between cgroups.

Fixes: 73f576c04b941 ("mm: memcontrol: fix cgroup creation failure after many small jobs")
Link: http://lkml.kernel.org/r/9ce297c64954a42dc90b543bc76106c4a94f07e8.1470219853.git.vdavydov@virtuozzo.com
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: memcontrol: fix swap counter leak on swapout from offline cgroup

commit 1f47b61fb4077936465dcde872a4e5cc4fe708da upstream.

An offline memory cgroup might have anonymous memory or shmem left
charged to it and no swap.  Since only swap entries pin the id of an
offline cgroup, such a cgroup will have no id and so an attempt to
swapout its anon/shmem will not store memory cgroup info in the swap
cgroup map.  As a result, memcg->swap or memcg->memsw will never get
uncharged from it and any of its ascendants.

Fix this by always charging swapout to the first ancestor cgroup that
hasn't released its id yet.

[hannes@cmpxchg.org: add comment to mem_cgroup_swapout]
[vdavydov@virtuozzo.com: use WARN_ON_ONCE() in mem_cgroup_id_get_online()]
Link: http://lkml.kernel.org/r/20160803123445.GJ13263@esperanza
Fixes: 73f576c04b941 ("mm: memcontrol: fix cgroup creation failure after many small jobs")
Link: http://lkml.kernel.org/r/5336daa5c9a32e776067773d9da655d2dc126491.1470219853.git.vdavydov@virtuozzo.com
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org> [3.19+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: memcontrol: fix cgroup creation failure after many small jobs

commit 73f576c04b9410ed19660f74f97521bee6e1c546 upstream.

The memory controller has quite a bit of state that usually outlives the
cgroup and pins its CSS until said state disappears.  At the same time
it imposes a 16-bit limit on the CSS ID space to economically store IDs
in the wild.  Consequently, when we use cgroups to contain frequent but
small and short-lived jobs that leave behind some page cache, we quickly
run into the 64k limitations of outstanding CSSs.  Creating a new cgroup
fails with -ENOSPC while there are only a few, or even no user-visible
cgroups in existence.

Although pinning CSSs past cgroup removal is common, there are only two
instances that actually need an ID after a cgroup is deleted: cache
shadow entries and swapout records.

Cache shadow entries reference the ID weakly and can deal with the CSS
having disappeared when it's looked up later.  They pose no hurdle.

Swap-out records do need to pin the css to hierarchically attribute
swapins after the cgroup has been deleted; though the only pages that
remain swapped out after offlining are tmpfs/shmem pages.  And those
references are under the user's control, so they are manageable.

This patch introduces a private 16-bit memcg ID and switches swap and
cache shadow entries over to using that.  This ID can then be recycled
after offlining when the CSS remains pinned only by objects that don't
specifically need it.

This script demonstrates the problem by faulting one cache page in a new
cgroup and deleting it again:

  set -e
  mkdir -p pages
  for x in `seq 128000`; do
    [ $((x % 1000)) -eq 0 ] && echo $x
    mkdir /cgroup/foo
    echo $$ >/cgroup/foo/cgroup.procs
    echo trex >pages/$x
    echo $$ >/cgroup/cgroup.procs
    rmdir /cgroup/foo
  done

When run on an unpatched kernel, we eventually run out of possible IDs
even though there are no visible cgroups:

  [root@ham ~]# ./cssidstress.sh
  [...]
  65000
  mkdir: cannot create directory '/cgroup/foo': No space left on device

After this patch, the IDs get released upon cgroup destruction and the
cache and css objects get released once memory reclaim kicks in.

[hannes@cmpxchg.org: init the IDR]
Link: http://lkml.kernel.org/r/20160621154601.GA22431@cmpxchg.org
Fixes: b2052564e66d ("mm: memcontrol: continue cache reclaim from offlined groups")
Link: http://lkml.kernel.org/r/20160617162516.GD19084@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: John Garcia <john.garcia@mesosphere.io>
Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Nikolay Borisov <kernel@kyup.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix reference counting bug on block allocation error

commit 554a5ccc4e4a20c5f3ec859de0842db4b4b9c77e upstream.

If we hit this error when mounted with errors=continue or
errors=remount-ro:

    EXT4-fs error (device loop0): ext4_mb_mark_diskspace_used:2940: comm ext4.exe: Allocating blocks 5090-6081 which overlap fs metadata

then ext4_mb_new_blocks() will call ext4_mb_release_context() and try to
continue. However, ext4_mb_release_context() is the wrong thing to call
here since we are still actually using the allocation context.

Instead, just error out. We could retry the allocation, but there is a
possibility of getting stuck in an infinite loop instead, so this seems
safer.

[ Fixed up so we don't return EAGAIN to userspace. --tytso ]

Fixes: 8556e8f3b6 ("ext4: Don't allow new groups to be added during block allocation")
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: short-cut orphan cleanup on error

commit c65d5c6c81a1f27dec5f627f67840726fcd146de upstream.

If we encounter a filesystem error during orphan cleanup, we should stop.
Otherwise, we may end up in an infinite loop where the same inode is
processed again and again.

    EXT4-fs (loop0): warning: checktime reached, running e2fsck is recommended
    EXT4-fs error (device loop0): ext4_mb_generate_buddy:758: group 2, block bitmap and bg descriptor inconsistent: 6117 vs 0 free clusters
    Aborting journal on device loop0-8.
    EXT4-fs (loop0): Remounting filesystem read-only
    EXT4-fs error (device loop0) in ext4_free_blocks:4895: Journal has aborted
    EXT4-fs error (device loop0) in ext4_do_update_inode:4893: Journal has aborted
    EXT4-fs error (device loop0) in ext4_do_update_inode:4893: Journal has aborted
    EXT4-fs error (device loop0) in ext4_ext_remove_space:3068: IO failure
    EXT4-fs error (device loop0) in ext4_ext_truncate:4667: Journal has aborted
    EXT4-fs error (device loop0) in ext4_orphan_del:2927: Journal has aborted
    EXT4-fs error (device loop0) in ext4_do_update_inode:4893: Journal has aborted
    EXT4-fs (loop0): Inode 16 (00000000618192a0): orphan list check failed!
    [...]
    EXT4-fs (loop0): Inode 16 (0000000061819748): orphan list check failed!
    [...]
    EXT4-fs (loop0): Inode 16 (0000000061819bf0): orphan list check failed!
    [...]

See-also: c9eb13a9105 ("ext4: fix hang when processing corrupted orphaned inode list")
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: validate s_reserved_gdt_blocks on mount

commit 5b9554dc5bf008ae7f68a52e3d7e76c0920938a2 upstream.

If s_reserved_gdt_blocks is extremely large, it's possible for
ext4_init_block_bitmap(), which is called when ext4 sets up an
uninitialized block bitmap, to corrupt random kernel memory.  Add the
same checks which e2fsck has --- it must never be larger than
blocksize / sizeof(__u32) --- and then add a backup check in
ext4_init_block_bitmap() in case the superblock gets modified after
the file system is mounted.

Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: don't call ext4_should_journal_data() on the journal inode

commit 6a7fd522a7c94cdef0a3b08acf8e6702056e635c upstream.

If ext4_fill_super() fails early, it's possible for ext4_evict_inode()
to call ext4_should_journal_data() before superblock options and flags
are fully set up.  In that case, the iput() on the journal inode can
end up causing a BUG().

Work around this problem by reordering the tests so we only call
ext4_should_journal_data() after we know it's not the journal inode.

Fixes: 2d859db3e4 ("ext4: fix data corruption in inodes with journalled data")
Fixes: 2b405bfa84 ("ext4: fix data=journal fast mount/umount hang")
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix deadlock during page writeback

commit 646caa9c8e196880b41cd3e3d33a2ebc752bdb85 upstream.

Commit 06bd3c36a733 (ext4: fix data exposure after a crash) uncovered a
deadlock in ext4_writepages() which was previously much harder to hit.
After this commit xfstest generic/130 reproduces the deadlock on small
filesystems.

The problem happens when ext4_do_update_inode() sets LARGE_FILE feature
and marks current inode handle as synchronous. That subsequently results
in ext4_journal_stop() called from ext4_writepages() to block waiting for
transaction commit while still holding page locks, reference to io_end,
and some prepared bio in mpd structure each of which can possibly block
transaction commit from completing and thus results in deadlock.

Fix the problem by releasing page locks, io_end reference, and
submitting prepared bio before calling ext4_journal_stop().

[ Changed to defer the call to ext4_journal_stop() only if the handle
  is synchronous.  --tytso ]

Reported-and-tested-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: check for extents that wrap around

commit f70749ca42943faa4d4dcce46dfdcaadb1d0c4b6 upstream.

An extent with lblock = 4294967295 and len = 1 will pass the
ext4_valid_extent() test:

ext4_lblk_t last = lblock + len - 1;

if (len == 0 || lblock > last)
return 0;

since last = 4294967295 + 1 - 1 = 4294967295. This would later trigger
the BUG_ON(es->es_lblk + es->es_len < es->es_lblk) in ext4_es_end().

We can simplify it by removing the - 1 altogether and changing the test
to use lblock + len <= lblock, since now if len = 0, then lblock + 0 ==
lblock and it fails, and if len > 0 then lblock + len > lblock in order
to pass (i.e. it doesn't overflow).

Fixes: 5946d0893 ("ext4: check for overlapping extents in ext4_valid_extent_entries()")
Fixes: 2f974865f ("ext4: check for zero length extent explicitly")
Cc: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Phil Turnbull <phil.turnbull@oracle.com>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: scatterwalk - Fix test in scatterwalk_done

commit 5f070e81bee35f1b7bd1477bb223a873ff657803 upstream.

When there is more data to be processed, the current test in
scatterwalk_done may prevent us from calling pagedone even when
we should.

In particular, if we're on an SG entry spanning multiple pages
where the last page is not a full page, we will incorrectly skip
calling pagedone on the second last page.

This patch fixes this by adding a separate test for whether we've
reached the end of a page.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: gcm - Filter out async ghash if necessary

commit b30bdfa86431afbafe15284a3ad5ac19b49b88e3 upstream.

As it is if you ask for a sync gcm you may actually end up with
an async one because it does not filter out async implementations
of ghash.

This patch fixes this by adding the necessary filter when looking
for ghash.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs/dcache.c: avoid soft-lockup in dput()

commit 47be61845c775643f1aa4d2a54343549f943c94c upstream.

We triggered soft-lockup under stress test which
open/access/write/close one file concurrently on more than
five different CPUs:

WARN: soft lockup - CPU#0 stuck for 11s! [who:30631]
...
[<ffffffc0003986f8>] dput+0x100/0x298
[<ffffffc00038c2dc>] terminate_walk+0x4c/0x60
[<ffffffc00038f56c>] path_lookupat+0x5cc/0x7a8
[<ffffffc00038f780>] filename_lookup+0x38/0xf0
[<ffffffc000391180>] user_path_at_empty+0x78/0xd0
[<ffffffc0003911f4>] user_path_at+0x1c/0x28
[<ffffffc00037d4fc>] SyS_faccessat+0xb4/0x230

->d_lock trylock may failed many times because of concurrently
operations, and dput() may execute a long time.

Fix this by replacing cpu_relax() with cond_resched().
dput() used to be sleepable, so make it sleepable again
should be safe.

Signed-off-by: Wei Fang <fangwei1@huawei.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: fix wrong assignment of ->flags in fuse_send_init()

commit 9446385f05c9af25fed53dbed3cc75763730be52 upstream.

FUSE_HAS_IOCTL_DIR should be assigned to ->flags, it may be a typo.

Signed-off-by: Wei Fang <fangwei1@huawei.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 69fe05c90ed5 ("fuse: add missing INIT flags")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: fuse_flush must check mapping->flags for errors

commit 9ebce595f63a407c5cec98f98f9da8459b73740a upstream.

fuse_flush() calls write_inode_now() that triggers writeback, but actual
writeback will happen later, on fuse_sync_writes(). If an error happens,
fuse_writepage_end() will set error bit in mapping->flags. So, we have to
check mapping->flags after fuse_sync_writes().

Signed-off-by: Maxim Patlasov <mpatlasov@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 4d99ff8f12eb ("fuse: Turn writeback cache on")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: fsync() did not return IO errors

commit ac7f052b9e1534c8248f814b6f0068ad8d4a06d2 upstream.

Due to implementation of fuse writeback filemap_write_and_wait_range() does
not catch errors. We have to do this directly after fuse_sync_writes()

Signed-off-by: Alexey Kuznetsov <kuznet@virtuozzo.com>
Signed-off-by: Maxim Patlasov <mpatlasov@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 4d99ff8f12eb ("fuse: Turn writeback cache on")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sysv, ipc: fix security-layer leaking

commit 9b24fef9f0410fb5364245d6cc2bd044cc064007 upstream.

Commit 53dad6d3a8e5 ("ipc: fix race with LSMs") updated ipc_rcu_putref()
to receive rcu freeing function but used generic ipc_rcu_free() instead
of msg_rcu_free() which does security cleaning.

Running LTP msgsnd06 with kmemleak gives the following:

  cat /sys/kernel/debug/kmemleak

  unreferenced object 0xffff88003c0a11f8 (size 8):
    comm "msgsnd06", pid 1645, jiffies 4294672526 (age 6.549s)
    hex dump (first 8 bytes):
      1b 00 00 00 01 00 00 00                          ........
    backtrace:
      kmemleak_alloc+0x23/0x40
      kmem_cache_alloc_trace+0xe1/0x180
      selinux_msg_queue_alloc_security+0x3f/0xd0
      security_msg_queue_alloc+0x2e/0x40
      newque+0x4e/0x150
      ipcget+0x159/0x1b0
      SyS_msgget+0x39/0x40
      entry_SYSCALL_64_fastpath+0x13/0x8f

Manfred Spraul suggested to fix sem.c as well and Davidlohr Bueso to
only use ipc_rcu_free in case of security allocation failure in newary()

Fixes: 53dad6d3a8e ("ipc: fix race with LSMs")
Link: http://lkml.kernel.org/r/1470083552-22966-1-git-send-email-fabf@skynet.be
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: fix use-after-free in seq file

commit 77da160530dd1dc94f6ae15a981f24e5f0021e84 upstream.

I got a KASAN report of use-after-free:

    ==================================================================
    BUG: KASAN: use-after-free in klist_iter_exit+0x61/0x70 at addr ffff8800b6581508
    Read of size 8 by task trinity-c1/315
    =============================================================================
    BUG kmalloc-32 (Not tainted): kasan: bad access detected
    -----------------------------------------------------------------------------

    Disabling lock debugging due to kernel taint
    INFO: Allocated in disk_seqf_start+0x66/0x110 age=144 cpu=1 pid=315
            ___slab_alloc+0x4f1/0x520
            __slab_alloc.isra.58+0x56/0x80
            kmem_cache_alloc_trace+0x260/0x2a0
            disk_seqf_start+0x66/0x110
            traverse+0x176/0x860
            seq_read+0x7e3/0x11a0
            proc_reg_read+0xbc/0x180
            do_loop_readv_writev+0x134/0x210
            do_readv_writev+0x565/0x660
            vfs_readv+0x67/0xa0
            do_preadv+0x126/0x170
            SyS_preadv+0xc/0x10
            do_syscall_64+0x1a1/0x460
            return_from_SYSCALL_64+0x0/0x6a
    INFO: Freed in disk_seqf_stop+0x42/0x50 age=160 cpu=1 pid=315
            __slab_free+0x17a/0x2c0
            kfree+0x20a/0x220
            disk_seqf_stop+0x42/0x50
            traverse+0x3b5/0x860
            seq_read+0x7e3/0x11a0
            proc_reg_read+0xbc/0x180
            do_loop_readv_writev+0x134/0x210
            do_readv_writev+0x565/0x660
            vfs_readv+0x67/0xa0
            do_preadv+0x126/0x170
            SyS_preadv+0xc/0x10
            do_syscall_64+0x1a1/0x460
            return_from_SYSCALL_64+0x0/0x6a

    CPU: 1 PID: 315 Comm: trinity-c1 Tainted: G    B           4.7.0+ #62
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
     ffffea0002d96000 ffff880119b9f918 ffffffff81d6ce81 ffff88011a804480
     ffff8800b6581500 ffff880119b9f948 ffffffff8146c7bd ffff88011a804480
     ffffea0002d96000 ffff8800b6581500 fffffffffffffff4 ffff880119b9f970
    Call Trace:
     [<ffffffff81d6ce81>] dump_stack+0x65/0x84
     [<ffffffff8146c7bd>] print_trailer+0x10d/0x1a0
     [<ffffffff814704ff>] object_err+0x2f/0x40
     [<ffffffff814754d1>] kasan_report_error+0x221/0x520
     [<ffffffff8147590e>] __asan_report_load8_noabort+0x3e/0x40
     [<ffffffff83888161>] klist_iter_exit+0x61/0x70
     [<ffffffff82404389>] class_dev_iter_exit+0x9/0x10
     [<ffffffff81d2e8ea>] disk_seqf_stop+0x3a/0x50
     [<ffffffff8151f812>] seq_read+0x4b2/0x11a0
     [<ffffffff815f8fdc>] proc_reg_read+0xbc/0x180
     [<ffffffff814b24e4>] do_loop_readv_writev+0x134/0x210
     [<ffffffff814b4c45>] do_readv_writev+0x565/0x660
     [<ffffffff814b8a17>] vfs_readv+0x67/0xa0
     [<ffffffff814b8de6>] do_preadv+0x126/0x170
     [<ffffffff814b92ec>] SyS_preadv+0xc/0x10

This problem can occur in the following situation:

open()
 - pread()
    - .seq_start()
       - iter = kmalloc() // succeeds
       - seqf->private = iter
    - .seq_stop()
       - kfree(seqf->private)
 - pread()
    - .seq_start()
       - iter = kmalloc() // fails
    - .seq_stop()
       - class_dev_iter_exit(seqf->private) // boom! old pointer

As the comment in disk_seqf_stop() says, stop is called even if start
failed, so we need to reinitialise the private pointer to NULL when seq
iteration stops.

An alternative would be to set the private pointer to NULL when the
kmalloc() in disk_seqf_start() fails.

Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/syscalls/64: Add compat_sys_keyctl for 32-bit userspace

commit f7d665627e103e82d34306c7d3f6f46f387c0d8b upstream.

x86_64 needs to use compat_sys_keyctl for 32-bit userspace rather than
calling sys_keyctl(). The latter will work in a lot of cases, thereby
hiding the issue.

Reported-by: Stephan Mueller <smueller@chronox.de>
Tested-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: keyrings@vger.kernel.org
Cc: linux-security-module@vger.kernel.org
Link: http://lkml.kernel.org/r/146961615805.14395.5581949237156769439.stgit@warthog.procyon.org.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Pretend cursor is always on for ILK-style WM calculations (v2)

commit e2e407dc093f530b771ee8bf8fe1be41e3cea8b3 upstream.

Due to our lack of two-step watermark programming, our driver has
historically pretended that the cursor plane is always on for the
purpose of watermark calculations; this helps avoid serious flickering
when the cursor turns off/on (e.g., when the user moves the mouse
pointer to a different screen).  That workaround was accidentally
dropped as we started working toward atomic watermark updates.  Since we
still aren't quite there yet with two-stage updates, we need to
resurrect the workaround and treat the cursor as always active.

v2: Tweak cursor width calculations slightly to more closely match the
    logic we used before the atomic overhaul began.  (Ville)

Cc: simdev11@outlook.com
Cc: manfred.kitzbichler@gmail.com
Cc: drm-intel-fixes@lists.freedesktop.org
Reported-by: simdev11@outlook.com
Reported-by: manfred.kitzbichler@gmail.com
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93892
Fixes: 43d59eda1 ("drm/i915: Eliminate usage of plane_wm_parameters from ILK-style WM code (v2)")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1454479611-6804-1-git-send-email-matthew.d.roper@intel.com
(cherry picked from commit b2435692dbb709d4c8ff3b2f2815c9b8423b72bb)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1454958328-30129-1-git-send-email-matthew.d.roper@intel.com
Tested-by: Jay <mymailclone@t-online.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm/pat: Fix BUG_ON() in mmap_mem() on QEMU/i386

commit 1886297ce0c8d563a08c8a8c4c0b97743e06cd37 upstream.

The following BUG_ON() crash was reported on QEMU/i386:

  kernel BUG at arch/x86/mm/physaddr.c:79!
  Call Trace:
  phys_mem_access_prot_allowed
  mmap_mem
  ? mmap_region
  mmap_region
  do_mmap
  vm_mmap_pgoff
  SyS_mmap_pgoff
  do_int80_syscall_32
  entry_INT80_32

after commit:

  edfe63ec97ed ("x86/mtrr: Fix Xorg crashes in Qemu sessions")

PAT is now set to disabled state when MTRRs are disabled.
Thus, reactivating the __pa(high_memory) check in
phys_mem_access_prot_allowed().

When CONFIG_DEBUG_VIRTUAL is set, __pa() calls __phys_addr(),
which in turn calls slow_virt_to_phys() for 'high_memory'.
Because 'high_memory' is set to (the max direct mapped virt
addr + 1), it is not a valid virtual address.  Hence,
slow_virt_to_phys() returns 0 and hit the BUG_ON.  Using
__pa_nodebug() instead of __pa() will fix this BUG_ON.

However, this code block, originally written for Pentiums and
earlier, is no longer adequate since a 32-bit Xen guest has
MTRRs disabled and supports ZONE_HIGHMEM.  In this setup,
this code sets UC attribute for accessing RAM in high memory
range.

Delete this code block as it has been unused for a long time.

Reported-by: kernel test robot <ying.huang@linux.intel.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/1460403360-25441-1-git-send-email-toshi.kani@hpe.com
Link: https://lkml.org/lkml/2016/4/1/608
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/pat: Document the PAT initialization sequence

commit b6350c21cfe8aa9d65e189509a23c0ea4b8362c2 upstream.

Update PAT documentation to describe how PAT is initialized under
various configurations.

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: elliott@hpe.com
Cc: konrad.wilk@oracle.com
Cc: paul.gortmaker@windriver.com
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/1458769323-24491-8-git-send-email-toshi.kani@hpe.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/xen, pat: Remove PAT table init code from Xen

commit 88ba281108ed0c25c9d292b48bd3f272fcb90dd0 upstream.

Xen supports PAT without MTRRs for its guests.  In order to
enable WC attribute, it was necessary for xen_start_kernel()
to call pat_init_cache_modes() to update PAT table before
starting guest kernel.

Now that the kernel initializes PAT table to the BIOS handoff
state when MTRR is disabled, this Xen-specific PAT init code
is no longer necessary.  Delete it from xen_start_kernel().

Also change __init_cache_modes() to a static function since
PAT table should not be tweaked by other modules.

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Juergen Gross <jgross@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: elliott@hpe.com
Cc: paul.gortmaker@windriver.com
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/1458769323-24491-7-git-send-email-toshi.kani@hpe.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mtrr: Fix PAT init handling when MTRR is disabled

commit ad025a73f0e9344ac73ffe1b74c184033e08e7d5 upstream.

get_mtrr_state() calls pat_init() on BSP even if MTRR is disabled.
This results in calling pat_init() on BSP only since APs do not call
pat_init() when MTRR is disabled.  This inconsistency between BSP
and APs leads to undefined behavior.

Make BSP's calling condition to pat_init() consistent with AP's,
mtrr_ap_init() and mtrr_aps_init().

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: elliott@hpe.com
Cc: konrad.wilk@oracle.com
Cc: paul.gortmaker@windriver.com
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/1458769323-24491-6-git-send-email-toshi.kani@hpe.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mtrr: Fix Xorg crashes in Qemu sessions

commit edfe63ec97ed8d4496225f7ba54c9ce4207c5431 upstream.

A Xorg failure on qemu32 was reported as a regression [1] caused by
commit 9cd25aac1f44 ("x86/mm/pat: Emulate PAT when it is disabled").

This patch fixes the Xorg crash.

Negative effects of this regression were the following two failures [2]
in Xorg on QEMU with QEMU CPU model "qemu32" (-cpu qemu32), which were
triggered by the fact that its virtual CPU does not support MTRRs.

 #1. copy_process() failed in the check in reserve_pfn_range()

    copy_process
     copy_mm
      dup_mm
       dup_mmap
        copy_page_range
         track_pfn_copy
          reserve_pfn_range

 A WC map request was tracked as WC in memtype, which set a PTE as
 UC (pgprot) per __cachemode2pte_tbl[].  This led to this error in
 reserve_pfn_range() called from track_pfn_copy(), which obtained
 a pgprot from a PTE.  It converts pgprot to page_cache_mode, which
 does not necessarily result in the original page_cache_mode since
 __cachemode2pte_tbl[] redirects multiple types to UC.

 #2. error path in copy_process() then hit WARN_ON_ONCE in
     untrack_pfn().

     x86/PAT: Xorg:509 map pfn expected mapping type uncached-
     minus for [mem 0xfd000000-0xfdffffff], got write-combining
      Call Trace:
     dump_stack
     warn_slowpath_common
     ? untrack_pfn
     ? untrack_pfn
     warn_slowpath_null
     untrack_pfn
     ? __kunmap_atomic
     unmap_single_vma
     ? pagevec_move_tail_fn
     unmap_vmas
     exit_mmap
     mmput
     copy_process.part.47
     _do_fork
     SyS_clone
     do_syscall_32_irqs_on
     entry_INT80_32

These negative effects are caused by two separate bugs, but they
can be addressed in separate patches.  Fixing the pat_init() issue
described below addresses the root cause, and avoids Xorg to hit
these cases.

When the CPU does not support MTRRs, MTRR does not call pat_init(),
which leaves PAT enabled without initializing PAT.  This pat_init()
issue is a long-standing issue, but manifested as issue #1 (and then
hit issue #2) with the above-mentioned commit because the memtype
now tracks cache attribute with 'page_cache_mode'.

This pat_init() issue existed before the commit, but we used pgprot
in memtype.  Hence, we did not have issue #1 before.  But WC request
resulted in WT in effect because WC pgrot is actually WT when PAT
is not initialized.  This is not how it was designed to work.  When
PAT is set to disable properly, WC is converted to UC.  The use of
WT can result in a system crash if the target range does not support
WT.  Fortunately, nobody ran into such issue before.

To fix this pat_init() issue, PAT code has been enhanced to provide
pat_disable() interface.  Call this interface when MTRRs are disabled.
By setting PAT to disable properly, PAT bypasses the memtype check,
and avoids issue #1.

  [1]: https://lkml.org/lkml/2016/3/3/828
  [2]: https://lkml.org/lkml/2016/3/4/775

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: elliott@hpe.com
Cc: konrad.wilk@oracle.com
Cc: paul.gortmaker@windriver.com
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/1458769323-24491-5-git-send-email-toshi.kani@hpe.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm/pat: Replace cpu_has_pat with boot_cpu_has()

commit d63dcf49cf5ae5605f4d14229e3888e104f294b1 upstream.

Borislav Petkov suggested:

 > Please use on init paths boot_cpu_has(X86_FEATURE_PAT) and on fast
 > paths static_cpu_has(X86_FEATURE_PAT). No more of that cpu_has_XXX
 > ugliness.

Replace the use of cpu_has_pat on init paths with boot_cpu_has().

Suggested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Elliott <elliott@hpe.com>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: konrad.wilk@oracle.com
Cc: paul.gortmaker@windriver.com
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/1458769323-24491-4-git-send-email-toshi.kani@hpe.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm/pat: Add pat_disable() interface

commit 224bb1e5d67ba0f2872c98002d6a6f991ac6fd4a upstream.

In preparation for fixing a regression caused by:

  9cd25aac1f44 ("x86/mm/pat: Emulate PAT when it is disabled")

... PAT needs to provide an interface that prevents the OS from
initializing the PAT MSR.

PAT MSR initialization must be done on all CPUs using the specific
sequence of operations defined in the Intel SDM.  This requires MTRRs
to be enabled since pat_init() is called as part of MTRR init
from mtrr_rendezvous_handler().

Make pat_disable() as the interface that prevents the OS from
initializing the PAT MSR.  MTRR will call this interface when it
cannot provide the SDM-defined sequence to initialize PAT.

This also assures that pat_disable() called from pat_bsp_init()
will set the PAT table properly when CPU does not support PAT.

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Elliott <elliott@hpe.com>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: konrad.wilk@oracle.com
Cc: paul.gortmaker@windriver.com
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/1458769323-24491-3-git-send-email-toshi.kani@hpe.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm/pat: Add support of non-default PAT MSR setting

commit 02f037d641dc6672be5cfe7875a48ab99b95b154 upstream.

In preparation for fixing a regression caused by:

  9cd25aac1f44 ("x86/mm/pat: Emulate PAT when it is disabled")'

... PAT needs to support a case that PAT MSR is initialized with a
non-default value.

When pat_init() is called and PAT is disabled, it initializes the
PAT table with the BIOS default value. Xen, however, sets PAT MSR
with a non-default value to enable WC. This causes inconsistency
between the PAT table and PAT MSR when PAT is set to disable on Xen.

Change pat_init() to handle the PAT disable cases properly.  Add
init_cache_modes() to handle two cases when PAT is set to disable.

 1. CPU supports PAT: Set PAT table to be consistent with PAT MSR.
 2. CPU does not support PAT: Set PAT table to be consistent with
    PWT and PCD bits in a PTE.

Note, __init_cache_modes(), renamed from pat_init_cache_modes(),
will be changed to a static function in a later patch.

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: elliott@hpe.com
Cc: konrad.wilk@oracle.com
Cc: paul.gortmaker@windriver.com
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/1458769323-24491-2-git-send-email-toshi.kani@hpe.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

devpts: clean up interface to pty drivers

commit 67245ff332064c01b760afa7a384ccda024bfd24 upstream.

This gets rid of the horrible notion of having that

    struct inode *ptmx_inode

be the linchpin of the interface between the pty code and devpts.

By de-emphasizing the ptmx inode, a lot of things actually get cleaner,
and we will have a much saner way forward.  In particular, this will
allow us to associate with any particular devpts instance at open-time,
and not be artificially tied to one particular ptmx inode.

The patch itself is actually fairly straightforward, and apart from some
locking and return path cleanups it's pretty mechanical:

 - the interfaces that devpts exposes all take "struct pts_fs_info *"
   instead of "struct inode *ptmx_inode" now.

   NOTE! The "struct pts_fs_info" thing is a completely opaque structure
   as far as the pty driver is concerned: it's still declared entirely
   internally to devpts. So the pty code can't actually access it in any
   way, just pass it as a "cookie" to the devpts code.

 - the "look up the pts fs info" is now a single clear operation, that
   also does the reference count increment on the pts superblock.

   So "devpts_add/del_ref()" is gone, and replaced by a "lookup and get
   ref" operation (devpts_get_ref(inode)), along with a "put ref" op
   (devpts_put_ref()).

 - the pty master "tty->driver_data" field now contains the pts_fs_info,
   not the ptmx inode.

 - because we don't care about the ptmx inode any more as some kind of
   base index, the ref counting can now drop the inode games - it just
   gets the ref on the superblock.

 - the pts_fs_info now has a back-pointer to the super_block. That's so
   that we can easily look up the information we actually need. Although
   quite often, the pts fs info was actually all we wanted, and not having
   to look it up based on some magical inode makes things more
   straightforward.

In particular, now that "devpts_get_ref(inode)" operation should really
be the *only* place we need to look up what devpts instance we're
associated with, and we do it exactly once, at ptmx_open() time.

The other side of this is that one ptmx node could now be associated
with multiple different devpts instances - you could have a single
/dev/ptmx node, and then have multiple mount namespaces with their own
instances of devpts mounted on /dev/pts/.  And that's all perfectly sane
in a model where we just look up the pts instance at open time.

This will eventually allow us to get rid of our odd single-vs-multiple
pts instance model, but this patch in itself changes no semantics, only
an internal binding model.

Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Peter Anvin <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Serge Hallyn <serge.hallyn@ubuntu.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Cc: Jann Horn <jann@thejh.net>
Cc: Greg KH <greg@kroah.com>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Florian Weimer <fw@deneb.enyo.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Francesco Ruggeri <fruggeri@arista.com>
Cc: "Herton R. Krzesinski" <herton@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

random: strengthen input validation for RNDADDTOENTCNT

commit 86a574de4590ffe6fd3f3ca34cdcf655a78e36ec upstream.

Don't allow RNDADDTOENTCNT or RNDADDENTROPY to accept a negative
entropy value.  It doesn't make any sense to subtract from the entropy
counter, and it can trigger a warning:

random: negative entropy/overflow: pool input count -40000
------------[ cut here ]------------
WARNING: CPU: 3 PID: 6828 at drivers/char/random.c:670[<      none
 >] credit_entropy_bits+0x21e/0xad0 drivers/char/random.c:670
Modules linked in:
CPU: 3 PID: 6828 Comm: a.out Not tainted 4.7.0-rc4+ #4
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
 ffffffff880b58e0 ffff88005dd9fcb0 ffffffff82cc838f ffffffff87158b40
 fffffbfff1016b1c 0000000000000000 0000000000000000 ffffffff87158b40
 ffffffff83283dae 0000000000000009 ffff88005dd9fcf8 ffffffff8136d27f
Call Trace:
 [<     inline     >] __dump_stack lib/dump_stack.c:15
 [<ffffffff82cc838f>] dump_stack+0x12e/0x18f lib/dump_stack.c:51
 [<ffffffff8136d27f>] __warn+0x19f/0x1e0 kernel/panic.c:516
 [<ffffffff8136d48c>] warn_slowpath_null+0x2c/0x40 kernel/panic.c:551
 [<ffffffff83283dae>] credit_entropy_bits+0x21e/0xad0 drivers/char/random.c:670
 [<     inline     >] credit_entropy_bits_safe drivers/char/random.c:734
 [<ffffffff8328785d>] random_ioctl+0x21d/0x250 drivers/char/random.c:1546
 [<     inline     >] vfs_ioctl fs/ioctl.c:43
 [<ffffffff8185316c>] do_vfs_ioctl+0x18c/0xff0 fs/ioctl.c:674
 [<     inline     >] SYSC_ioctl fs/ioctl.c:689
 [<ffffffff8185405f>] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:680
 [<ffffffff86a995c0>] entry_SYSCALL_64_fastpath+0x23/0xc1
arch/x86/entry/entry_64.S:207
---[ end trace 5d4902b2ba842f1f ]---

This was triggered using the test program:

// autogenerated by syzkaller (http://github.com/google/syzkaller)

int main() {
        int fd = open("/dev/random", O_RDWR);
        int val = -5000;
        ioctl(fd, RNDADDTOENTCNT, &val);
        return 0;
}

It's harmless in that (a) only root can trigger it, and (b) after
complaining the code never does let the entropy count go negative, but
it's better to simply not allow this userspace from passing in a
negative entropy value altogether.

Google-Bug-Id: #29575089
Reported-By: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

apparmor: fix ref count leak when profile sha1 hash is read

commit 0b938a2e2cf0b0a2c8bac9769111545aff0fee97 upstream.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "s390/kdump: Clear subchannel ID to signal non-CCW/SCSI IPL"

commit 5419447e2142d6ed68c9f5c1a28630b3a290a845 upstream.

This reverts commit 852ffd0f4e23248b47531058e531066a988434b5.

There are use cases where an intermediate boot kernel (1) uses kexec
to boot the final production kernel (2). For this scenario we should
provide the original boot information to the production kernel (2).
Therefore clearing the boot information during kexec() should not
be done.

Reported-by: Steffen Maier <maier@linux.vnet.ibm.com>
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KEYS: 64-bit MIPS needs to use compat_sys_keyctl for 32-bit userspace

commit 20f06ed9f61a185c6dabd662c310bed6189470df upstream.

MIPS64 needs to use compat_sys_keyctl for 32-bit userspace rather than
calling sys_keyctl.  The latter will work in a lot of cases, thereby hiding
the issue.

Reported-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-security-module@vger.kernel.org
Cc: keyrings@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13832/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm: oabi compat: add missing access checks

commit 7de249964f5578e67b99699c5f0b405738d820a2 upstream.

Add access checks to sys_oabi_epoll_wait() and sys_oabi_semtimedop().
This fixes CVE-2016-3857, a local privilege escalation under
CONFIG_OABI_COMPAT.

Reported-by: Chiachih Wu <wuchiachih@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Dave Weinstein <olorin@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cdc_ncm: do not call usbnet_link_change from cdc_ncm_bind

commit 4d06dd537f95683aba3651098ae288b7cbff8274 upstream.

usbnet_link_change will call schedule_work and should be
avoided if bind is failing. Otherwise we will end up with
scheduled work referring to a netdev which has gone away.

Instead of making the call conditional, we can just defer
it to usbnet_probe, using the driver_info flag made for
this purpose.

Fixes: 8a34b0ae8778 ("usbnet: cdc_ncm: apply usbnet_link_change")
Reported-by: Andrey Konovalov <andreyknvl@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR

commit a7ae81952cdab56a1277bd2f9ed7284c0f575120 upstream.

Many Intel systems the BIOS declares a SystemIO OpRegion below the SMBus
PCI device as can be seen in ACPI DSDT table from Lenovo Yoga 900:

  Device (SBUS)
  {
      OperationRegion (SMBI, SystemIO, (SBAR << 0x05), 0x10)
      Field (SMBI, ByteAcc, NoLock, Preserve)
      {
          HSTS,   8,
          Offset (0x02),
          HCON,   8,
          HCOM,   8,
          TXSA,   8,
          DAT0,   8,
          DAT1,   8,
          HBDR,   8,
          PECR,   8,
          RXSA,   8,
          SDAT,   16
      }

There are also bunch of AML methods that that the BIOS can use to access
these fields. Most of the systems in question AML methods accessing the
SMBI OpRegion are never used.

Now, because of this SMBI OpRegion many systems fail to load the SMBus
driver with an error looking like one below:

  ACPI Warning: SystemIO range 0x0000000000003040-0x000000000000305F
       conflicts with OpRegion 0x0000000000003040-0x000000000000304F
       (\_SB.PCI0.SBUS.SMBI) (20160108/utaddress-255)
  ACPI: If an ACPI driver is available for this device, you should use
       it instead of the native driver

The reason is that this SMBI OpRegion conflicts with the PCI BAR used by
the SMBus driver.

It turns out that we can install a custom SystemIO address space handler
for the SMBus device to intercept all accesses through that OpRegion. This
allows us to share the PCI BAR with the AML code if it for some reason is
using it. We do not expect that this OpRegion handler will ever be called
but if it is we print a warning and prevent all access from the SMBus
driver itself.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=110041
Reported-by: Andy Lutomirski <luto@kernel.org>
Reported-by: Pali Rohár <pali.rohar@gmail.com>
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: Pali Rohár <pali.rohar@gmail.com>
Tested-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm/32: Enable full randomization on i386 and X86_32

commit 8b8addf891de8a00e4d39fc32f93f7c5eb8feceb upstream.

Currently on i386 and on X86_64 when emulating X86_32 in legacy mode, only
the stack and the executable are randomized but not other mmapped files
(libraries, vDSO, etc.). This patch enables randomization for the
libraries, vDSO and mmap requests on i386 and in X86_32 in legacy mode.

By default on i386 there are 8 bits for the randomization of the libraries,
vDSO and mmaps which only uses 1MB of VA.

This patch preserves the original randomness, using 1MB of VA out of 3GB or
4GB. We think that 1MB out of 3GB is not a big cost for having the ASLR.

The first obvious security benefit is that all objects are randomized (not
only the stack and the executable) in legacy mode which highly increases
the ASLR effectiveness, otherwise the attackers may use these
non-randomized areas. But also sensitive setuid/setgid applications are
more secure because currently, attackers can disable the randomization of
these applications by setting the ulimit stack to "unlimited". This is a
very old and widely known trick to disable the ASLR in i386 which has been
allowed for too long.

Another trick used to disable the ASLR was to set the ADDR_NO_RANDOMIZE
personality flag, but fortunately this doesn't work on setuid/setgid
applications because there is security checks which clear Security-relevant
flags.

This patch always randomizes the mmap_legacy_base address, removing the
possibility to disable the ASLR by setting the stack to "unlimited".

Signed-off-by: Hector Marco-Gisbert <hecmargi@upv.es>
Acked-by: Ismael Ripoll Ripoll <iripoll@upv.es>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: akpm@linux-foundation.org
Cc: kees Cook <keescook@chromium.org>
Link: http://lkml.kernel.org/r/1457639460-5242-1-git-send-email-hecmargi@upv.es
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: sony: do not bail out when the sixaxis refuses the output report

commit 19f4c2ba869517048add62c202f9645b6adf5dfb upstream.

When setting the operational mode, some third party (Speedlink Strike-FX)
gamepads refuse the output report. Failing here means we refuse to
initialize the gamepad while this should be harmless.

The weird part is that the initial commit that added this: a7de9b8
("HID: sony: Enable Gasia third-party PS3 controllers") mentions this
very same controller as one requiring this output report.
Anyway, it's broken for one user at least, so let's change it.
We will report an error, but at least the controller should work.

And no, these devices present themselves as legacy Sony controllers
(VID:PID of 054C:0268, as in the official ones) so there are no ways
of discriminating them from the official ones.

https://bugzilla.redhat.com/show_bug.cgi?id=1255325

Reported-and-tested-by: Max Fedotov <thesourcehim@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Cc: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PNP: Add Broadwell to Intel MCH size workaround

commit a77060f07ffc6ac978e280e738302f3e5572a99e upstream.

Add device ID 0x1604 for Broadwell to commit cb171f7abb9a ("PNP:
Work around BIOS defects in Intel MCH area reporting").

>From a Lenovo ThinkPad T550:

  system 00:01: [io  0x1800-0x189f] could not be reserved
  system 00:01: [io  0x0800-0x087f] has been reserved
  system 00:01: [io  0x0880-0x08ff] has been reserved
  system 00:01: [io  0x0900-0x097f] has been reserved
  system 00:01: [io  0x0980-0x09ff] has been reserved
  system 00:01: [io  0x0a00-0x0a7f] has been reserved
  system 00:01: [io  0x0a80-0x0aff] has been reserved
  system 00:01: [io  0x0b00-0x0b7f] has been reserved
  system 00:01: [io  0x0b80-0x0bff] has been reserved
  system 00:01: [io  0x15e0-0x15ef] has been reserved
  system 00:01: [io  0x1600-0x167f] has been reserved
  system 00:01: [io  0x1640-0x165f] has been reserved
  system 00:01: [mem 0xf8000000-0xfbffffff] could not be reserved
  system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
  system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
  system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
  system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
  system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
  system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
  [...]
  resource sanity check: requesting [mem 0xfed10000-0xfed15fff], which spans more than pnp 00:01 [mem 0xfed10000-0xfed13fff]
  ------------[ cut here ]------------
  WARNING: CPU: 2 PID: 1 at /build/linux-CrHvZ_/linux-4.2.6/arch/x86/mm/ioremap.c:198 __ioremap_caller+0x2ee/0x360()
  Info: mapping multiple BARs. Your kernel is fine.
  Modules linked in:
  CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.2.0-1-amd64 #1 Debian 4.2.6-1
  Hardware name: LENOVO 20CKCTO1WW/20CKCTO1WW, BIOS N11ET34W (1.10 ) 08/20/2015
   0000000000000000 ffffffff817e6868 ffffffff8154e2f6 ffff8802241efbf8
   ffffffff8106e5b1 ffffc90000e98000 0000000000006000 ffffc90000e98000
   0000000000006000 0000000000000000 ffffffff8106e62a ffffffff817e68c8
  Call Trace:
   [<ffffffff8154e2f6>] ? dump_stack+0x40/0x50
   [<ffffffff8106e5b1>] ? warn_slowpath_common+0x81/0xb0
   [<ffffffff8106e62a>] ? warn_slowpath_fmt+0x4a/0x50
   [<ffffffff810742a3>] ? iomem_map_sanity_check+0xb3/0xc0
   [<ffffffff8105dade>] ? __ioremap_caller+0x2ee/0x360
   [<ffffffff81036ae6>] ? snb_uncore_imc_init_box+0x66/0x90
   [<ffffffff810351a8>] ? uncore_pci_probe+0xc8/0x1a0
   [<ffffffff81302d7f>] ? local_pci_probe+0x3f/0xa0
   [<ffffffff81303ea4>] ? pci_device_probe+0xc4/0x110
   [<ffffffff813d9b1e>] ? driver_probe_device+0x1ee/0x450
   [<ffffffff813d9dfb>] ? __driver_attach+0x7b/0x80
   [<ffffffff813d9d80>] ? driver_probe_device+0x450/0x450
   [<ffffffff813d796a>] ? bus_for_each_dev+0x5a/0x90
   [<ffffffff813d9091>] ? bus_add_driver+0x1f1/0x290
   [<ffffffff81b37fa8>] ? uncore_cpu_setup+0xc/0xc
   [<ffffffff813da73f>] ? driver_register+0x5f/0xe0
   [<ffffffff81b38074>] ? intel_uncore_init+0xcc/0x2b0
   [<ffffffff81b37fa8>] ? uncore_cpu_setup+0xc/0xc
   [<ffffffff8100213e>] ? do_one_initcall+0xce/0x200
   [<ffffffff8108a100>] ? parse_args+0x140/0x4e0
   [<ffffffff81b2b0cb>] ? kernel_init_freeable+0x162/0x1e8
   [<ffffffff815443f0>] ? rest_init+0x80/0x80
   [<ffffffff815443fe>] ? kernel_init+0xe/0xf0
   [<ffffffff81553e5f>] ? ret_from_fork+0x3f/0x70
   [<ffffffff815443f0>] ? rest_init+0x80/0x80
  ---[ end trace 472e7959536abf12 ]---

  00:00.0 Host bridge: Intel Corporation Broadwell-U Host Bridge -OPI (rev 09)
          Subsystem: Lenovo Device 2223
          Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
          Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
          Latency: 0
          Capabilities: [e0] Vendor Specific Information: Len=0c <?>
          Kernel driver in use: bdw_uncore
  00: 86 80 04 16 06 00 90 20 09 00 00 06 00 00 00 00
  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  20: 00 00 00 00 00 00 00 00 00 00 00 00 aa 17 23 22
  30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00

Signed-off-by: Christophe Le Roy <christophe.fish@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PNP: Add Haswell-ULT to Intel MCH size workaround

commit ed1f0eeebaeeb7f790e9e7642116a208581e5bfc upstream.

Add device ID 0x0a04 for Haswell-ULT to the list of devices with MCH
problems.

From a Lenovo ThinkPad T440S:
[    0.188604] pnp: PnP ACPI init
[    0.189044] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.189048] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[    0.189050] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[    0.189052] system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved
[    0.189054] system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
[    0.189056] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
[    0.189058] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
[    0.189060] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
[    0.189061] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
[    0.189063] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[    0.189065] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[    0.189067] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[    0.189069] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[    0.189071] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[    0.189073] system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved
[    0.189075] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[    0.189078] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[    0.189082] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.189216] system 00:01: [io  0x1800-0x189f] could not be reserved
[    0.189220] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.189222] system 00:01: [io  0x0880-0x08ff] has been reserved
[    0.189224] system 00:01: [io  0x0900-0x097f] has been reserved
[    0.189226] system 00:01: [io  0x0980-0x09ff] has been reserved
[    0.189229] system 00:01: [io  0x0a00-0x0a7f] has been reserved
[    0.189231] system 00:01: [io  0x0a80-0x0aff] has been reserved
[    0.189233] system 00:01: [io  0x0b00-0x0b7f] has been reserved
[    0.189235] system 00:01: [io  0x0b80-0x0bff] has been reserved
[    0.189238] system 00:01: [io  0x15e0-0x15ef] has been reserved
[    0.189240] system 00:01: [io  0x1600-0x167f] has been reserved
[    0.189242] system 00:01: [io  0x1640-0x165f] has been reserved
[    0.189246] system 00:01: [mem 0xf8000000-0xfbffffff] could not be reserved
[    0.189249] system 00:01: [mem 0x00000000-0x00000fff] could not be reserved
[    0.189251] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.189254] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.189256] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.189258] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.189261] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[    0.189264] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[....]
[    0.583653] resource sanity check: requesting [mem 0xfed10000-0xfed15fff], which spans more than pnp 00:01 [mem 0xfed10000-0xfed13fff]
[    0.583654] ------------[ cut here ]------------
[    0.583660] WARNING: CPU: 0 PID: 1 at arch/x86/mm/ioremap.c:198 __ioremap_caller+0x2c5/0x380()
[    0.583661] Info: mapping multiple BARs. Your kernel is fine.
[    0.583662] Modules linked in:

[    0.583666] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.3.3-303.fc23.x86_64 #1
[    0.583668] Hardware name: LENOVO 20AR001GXS/20AR001GXS, BIOS GJET86WW (2.36 ) 12/04/2015
[    0.583670]  0000000000000000 0000000014cf7e59 ffff880214a1baf8 ffffffff813a625f
[    0.583673]  ffff880214a1bb40 ffff880214a1bb30 ffffffff810a07c2 00000000fed10000
[    0.583675]  ffffc90000cb8000 0000000000006000 0000000000000000 ffff8800d6381040
[    0.583678] Call Trace:
[    0.583683]  [<ffffffff813a625f>] dump_stack+0x44/0x55
[    0.583686]  [<ffffffff810a07c2>] warn_slowpath_common+0x82/0xc0
[    0.583688]  [<ffffffff810a085c>] warn_slowpath_fmt+0x5c/0x80
[    0.583692]  [<ffffffff810a6fba>] ? iomem_map_sanity_check+0xba/0xd0
[    0.583695]  [<ffffffff81065835>] __ioremap_caller+0x2c5/0x380
[    0.583698]  [<ffffffff81065907>] ioremap_nocache+0x17/0x20
[    0.583701]  [<ffffffff8103a119>] snb_uncore_imc_init_box+0x79/0xb0
[    0.583705]  [<ffffffff81038900>] uncore_pci_probe+0xd0/0x1b0
[    0.583707]  [<ffffffff813efda5>] local_pci_probe+0x45/0xa0
[    0.583710]  [<ffffffff813f118d>] pci_device_probe+0xfd/0x140
[    0.583713]  [<ffffffff814d9b52>] driver_probe_device+0x222/0x480
[    0.583715]  [<ffffffff814d9e34>] __driver_attach+0x84/0x90
[    0.583717]  [<ffffffff814d9db0>] ? driver_probe_device+0x480/0x480
[    0.583720]  [<ffffffff814d762c>] bus_for_each_dev+0x6c/0xc0
[    0.583722]  [<ffffffff814d930e>] driver_attach+0x1e/0x20
[    0.583724]  [<ffffffff814d8e4b>] bus_add_driver+0x1eb/0x280
[    0.583727]  [<ffffffff81d6af1a>] ? uncore_cpu_setup+0x12/0x12
[    0.583729]  [<ffffffff814da680>] driver_register+0x60/0xe0
[    0.583733]  [<ffffffff813ef78c>] __pci_register_driver+0x4c/0x50
[    0.583736]  [<ffffffff81d6affc>] intel_uncore_init+0xe2/0x2e6
[    0.583738]  [<ffffffff81d6af1a>] ? uncore_cpu_setup+0x12/0x12
[    0.583741]  [<ffffffff81002123>] do_one_initcall+0xb3/0x200
[    0.583745]  [<ffffffff810be500>] ? parse_args+0x1a0/0x4a0
[    0.583749]  [<ffffffff81d5c1c8>] kernel_init_freeable+0x189/0x223
[    0.583752]  [<ffffffff81775c40>] ? rest_init+0x80/0x80
[    0.583754]  [<ffffffff81775c4e>] kernel_init+0xe/0xe0
[    0.583758]  [<ffffffff81781adf>] ret_from_fork+0x3f/0x70
[    0.583760]  [<ffffffff81775c40>] ? rest_init+0x80/0x80
[    0.583765] ---[ end trace 077c426a39e018aa ]---

00:00.0 Host bridge [0600]: Intel Corporation Haswell-ULT DRAM Controller [8086:0a04] (rev 0b)
Subsystem: Lenovo Device [17aa:220c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: hsw_uncore

Link: https://bugzilla.redhat.com/show_bug.cgi?id=1300955
Tested-by: <robo@tcp.sk>
Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: ignore errors from scsi_dh_add_device()

commit 221255aee67ec1c752001080aafec0c4e9390d95 upstream.

device handler initialisation might fail due to a number of
reasons. But as device_handlers are optional this shouldn't
cause us to disable the device entirely.
So just ignore errors from scsi_dh_add_device().

Reviewed-by: Johannes Thumshirn <jthumshirn@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipath: Restrict use of the write() interface

Commit e6bd18f57aad ("IB/security: Restrict use of the write()
interface") fixed a security problem with various write()
implementations in the Infiniband subsystem.  In older kernel versions
the ipath_write() function has the same problem and needs the same
restriction.  (The ipath driver has been completely removed upstream.)

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: consider recv buf for the initial window scale

[ Upstream commit f626300a3e776ccc9671b0dd94698fb3aa315966 ]

tcp_select_initial_window() intends to advertise a window
scaling for the maximum possible window size. To do so,
it considers the maximum of net.ipv4.tcp_rmem[2] and
net.core.rmem_max as the only possible upper-bounds.
However, users with CAP_NET_ADMIN can use SO_RCVBUFFORCE
to set the socket's receive buffer size to values
larger than net.ipv4.tcp_rmem[2] and net.core.rmem_max.
Thus, SO_RCVBUFFORCE is effectively ignored by
tcp_select_initial_window().

To fix this, consider the maximum of net.ipv4.tcp_rmem[2],
net.core.rmem_max and socket's initial buffer space.

Fixes: b0573dea1fb3 ("[NET]: Introduce SO_{SND,RCV}BUFFORCE socket options")
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Suggested-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qed: Fix setting/clearing bit in completion bitmap

[ Upstream commit 59d3f1ceb69b54569685d0c34dff16a1e0816b19 ]

Slowpath completion handling is incorrectly changing
SPQ_RING_SIZE bits instead of a single one.

Fixes: 76a9a3642a0b ("qed: fix handling of concurrent ramrods")
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/irda: fix NULL pointer dereference on memory allocation failure

[ Upstream commit d3e6952cfb7ba5f4bfa29d4803ba91f96ce1204d ]

I ran into this:

    kasan: CONFIG_KASAN_INLINE enabled
    kasan: GPF could be caused by NULL-ptr deref or user memory access
    general protection fault: 0000 [#1] PREEMPT SMP KASAN
    CPU: 2 PID: 2012 Comm: trinity-c3 Not tainted 4.7.0-rc7+ #19
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
    task: ffff8800b745f2c0 ti: ffff880111740000 task.ti: ffff880111740000
    RIP: 0010:[<ffffffff82bbf066>]  [<ffffffff82bbf066>] irttp_connect_request+0x36/0x710
    RSP: 0018:ffff880111747bb8  EFLAGS: 00010286
    RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000069dd8358
    RDX: 0000000000000009 RSI: 0000000000000027 RDI: 0000000000000048
    RBP: ffff880111747c00 R08: 0000000000000000 R09: 0000000000000000
    R10: 0000000069dd8358 R11: 1ffffffff0759723 R12: 0000000000000000
    R13: ffff88011a7e4780 R14: 0000000000000027 R15: 0000000000000000
    FS:  00007fc738404700(0000) GS:ffff88011af00000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: 00007fc737fdfb10 CR3: 0000000118087000 CR4: 00000000000006e0
    Stack:
     0000000000000200 ffff880111747bd8 ffffffff810ee611 ffff880119f1f220
     ffff880119f1f4f8 ffff880119f1f4f0 ffff88011a7e4780 ffff880119f1f232
     ffff880119f1f220 ffff880111747d58 ffffffff82bca542 0000000000000000
    Call Trace:
     [<ffffffff82bca542>] irda_connect+0x562/0x1190
     [<ffffffff825ae582>] SYSC_connect+0x202/0x2a0
     [<ffffffff825b4489>] SyS_connect+0x9/0x10
     [<ffffffff8100334c>] do_syscall_64+0x19c/0x410
     [<ffffffff83295ca5>] entry_SYSCALL64_slow_path+0x25/0x25
    Code: 41 89 ca 48 89 e5 41 57 41 56 41 55 41 54 41 89 d7 53 48 89 fb 48 83 c7 48 48 89 fa 41 89 f6 48 c1 ea 03 48 83 ec 20 4c 8b 65 10 <0f> b6 04 02 84 c0 74 08 84 c0 0f 8e 4c 04 00 00 80 7b 48 00 74
    RIP  [<ffffffff82bbf066>] irttp_connect_request+0x36/0x710
     RSP <ffff880111747bb8>
    ---[ end trace 4cda2588bc055b30 ]---

The problem is that irda_open_tsap() can fail and leave self->tsap = NULL,
and then irttp_connect_request() almost immediately dereferences it.

Cc: stable@vger.kernel.org
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: bgmac: Fix infinite loop in bgmac_dma_tx_add()

[ Upstream commit e86663c475d384ab5f46cb5637e9b7ad08c5c505 ]

Nothing is decrementing the index "i" while we are cleaning up the
fragments we could not successful transmit.

Fixes: 9cde94506eacf ("bgmac: implement scatter/gather support")
Reported-by: coverity (CID 1352048)
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bonding: set carrier off for devices created through netlink

[ Upstream commit 005db31d5f5f7c31cfdc43505d77eb3ca5cf8ec6 ]

Commit e826eafa65c6 ("bonding: Call netif_carrier_off after
register_netdevice") moved netif_carrier_off() from bond_init() to
bond_create(), but the latter is called only for initial default
devices and ones created through sysfs:

 $ modprobe bonding
 $ echo +bond1 > /sys/class/net/bonding_masters
 $ ip link add bond2 type bond
 $ grep "MII Status" /proc/net/bonding/*
 /proc/net/bonding/bond0:MII Status: down
 /proc/net/bonding/bond1:MII Status: down
 /proc/net/bonding/bond2:MII Status: up

Ensure that carrier is initially off also for devices created through
netlink.

Signed-off-by: Beniamino Galvani <bgalvani@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv4: reject RTNH_F_DEAD and RTNH_F_LINKDOWN from user space

[ Upstream commit 80610229ef7b26615dbb6cb6e873709a60bacc9f ]

Vegard Nossum is reporting for a crash in fib_dump_info
when nh_dev = NULL and fib_nhs == 1:

Pid: 50, comm: netlink.exe Not tainted 4.7.0-rc5+
RIP: 0033:[<00000000602b3d18>]
RSP: 0000000062623890  EFLAGS: 00010202
RAX: 0000000000000000 RBX: 000000006261b800 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000024 RDI: 000000006245ba00
RBP: 00000000626238f0 R08: 000000000000029c R09: 0000000000000000
R10: 0000000062468038 R11: 000000006245ba00 R12: 000000006245ba00
R13: 00000000625f96c0 R14: 00000000601e16f0 R15: 0000000000000000
Kernel panic - not syncing: Kernel mode fault at addr 0x2e0, ip 0x602b3d18
CPU: 0 PID: 50 Comm: netlink.exe Not tainted 4.7.0-rc5+ #581
Stack:
 626238f0 960226a02 00000400 000000fe
 62623910 600afca7 62623970 62623a48
 62468038 00000018 00000000 00000000
Call Trace:
 [<602b3e93>] rtmsg_fib+0xd3/0x190
 [<602b6680>] fib_table_insert+0x260/0x500
 [<602b0e5d>] inet_rtm_newroute+0x4d/0x60
 [<60250def>] rtnetlink_rcv_msg+0x8f/0x270
 [<60267079>] netlink_rcv_skb+0xc9/0xe0
 [<60250d4b>] rtnetlink_rcv+0x3b/0x50
 [<60265400>] netlink_unicast+0x1a0/0x2c0
 [<60265e47>] netlink_sendmsg+0x3f7/0x470
 [<6021dc9a>] sock_sendmsg+0x3a/0x90
 [<6021e0d0>] ___sys_sendmsg+0x300/0x360
 [<6021fa64>] __sys_sendmsg+0x54/0xa0
 [<6021fac0>] SyS_sendmsg+0x10/0x20
 [<6001ea68>] handle_syscall+0x88/0x90
 [<600295fd>] userspace+0x3fd/0x500
 [<6001ac55>] fork_handler+0x85/0x90

$ addr2line -e vmlinux -i 0x602b3d18
include/linux/inetdevice.h:222
net/ipv4/fib_semantics.c:1264

Problem happens when RTNH_F_LINKDOWN is provided from user space
when creating routes that do not use the flag, catched with
netlink fuzzer.

Currently, the kernel allows user space to set both flags
to nh_flags and fib_flags but this is not intentional, the
assumption was that they are not set. Fix this by rejecting
both flags with EINVAL.

Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Fixes: 0eeb075fad73 ("net: ipv4 sysctl option to ignore routes when nexthop link is down")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Cc: Andy Gospodarek <gospo@cumulusnetworks.com>
Cc: Dinesh Dutt <ddutt@cumulusnetworks.com>
Cc: Scott Feldman <sfeldma@gmail.com>
Reviewed-by: Andy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: enable per-socket rate limiting of all 'challenge acks'

[ Upstream commit 083ae308280d13d187512b9babe3454342a7987e ]

The per-socket rate limit for 'challenge acks' was introduced in the
context of limiting ack loops:

commit f2b2c582e824 ("tcp: mitigate ACK loops for connections as tcp_sock")

And I think it can be extended to rate limit all 'challenge acks' on a
per-socket basis.

Since we have the global tcp_challenge_ack_limit, this patch allows for
tcp_challenge_ack_limit to be set to a large value and effectively rely on
the per-socket limit, or set tcp_challenge_ack_limit to a lower value and
still prevents a single connections from consuming the entire challenge ack
quota.

It further moves in the direction of eliminating the global limit at some
point, as Eric Dumazet has suggested. This a follow-up to:
Subject: tcp: make challenge acks less predictable

Cc: Eric Dumazet <edumazet@google.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Yue Cao <ycao009@ucr.edu>
Signed-off-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: make challenge acks less predictable

[ Upstream commit 75ff39ccc1bd5d3c455b6822ab09e533c551f758 ]

Yue Cao claims that current host rate limiting of challenge ACKS
(RFC 5961) could leak enough information to allow a patient attacker
to hijack TCP sessions. He will soon provide details in an academic
paper.

This patch increases the default limit from 100 to 1000, and adds
some randomization so that the attacker can no longer hijack
sessions without spending a considerable amount of probes.

Based on initial analysis and patch from Linus.

Note that we also have per socket rate limiting, so it is tempting
to remove the host limit in the future.

v2: randomize the count of challenge acks per second, not the period.

Fixes: 282f23c6ee34 ("tcp: implement RFC 5961 3.2")
Reported-by: Yue Cao <ycao009@ucr.edu>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.4.17

vfs: fix deadlock in file_remove_privs() on overlayfs

commit c1892c37769cf89c7e7ba57528ae2ccb5d153c9b upstream.

file_remove_privs() is called with inode lock on file_inode(), which
proceeds to calling notify_change() on file->f_path.dentry.  Which triggers
the WARN_ON_ONCE(!inode_is_locked(inode)) in addition to deadlocking later
when ovl_setattr tries to lock the underlying inode again.

Fix this mess by not mixing the layers, but doing everything on underlying
dentry/inode.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 07a2daab49c5 ("ovl: Copy up underlying inode's ->i_mode to overlay inode")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

intel_th: Fix a deadlock in modprobing

commit a36aa80f3cb2540fb1dbad6240852de4365a2e82 upstream.

Driver initialization tries to request a hub (GTH) driver module from
its probe callback, resulting in a deadlock.

This patch solves the problem by adding a deferred work for requesting
the hub module.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

intel_th: pci: Add Kaby Lake PCH-H support

commit 7a1a47ce35821b40f5b2ce46379ba14393bc3873 upstream.

This adds Intel(R) Trace Hub PCI ID for Kaby Lake PCH-H.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: mvneta: set real interrupt per packet for tx_done

commit 06708f81528725148473c0869d6af5f809c6824b upstream.

Commit aebea2ba0f74 ("net: mvneta: fix Tx interrupt delay") intended to
set coalescing threshold to a value guaranteeing interrupt generation
per each sent packet, so that buffers can be released with no delay.

In fact setting threshold to '1' was wrong, because it causes interrupt
every two packets. According to the documentation a reason behind it is
following - interrupt occurs once sent buffers counter reaches a value,
which is higher than one specified in MVNETA_TXQ_SIZE_REG(q). This
behavior was confirmed during tests. Also when testing the SoC working
as a NAS device, better performance was observed with int-per-packet,
as it strongly depends on the fact that all transmitted packets are
released immediately.

This commit enables NETA controller work in interrupt per sent packet mode
by setting coalescing threshold to 0.

Signed-off-by: Dmitri Epshtein <dima@marvell.com>
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Fixes aebea2ba0f74 ("net: mvneta: fix Tx interrupt delay")
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libceph: apply new_state before new_up_client on incrementals

commit 930c532869774ebf8af9efe9484c597f896a7d46 upstream.

Currently, osd_weight and osd_state fields are updated in the encoding
order.  This is wrong, because an incremental map may look like e.g.

    new_up_client: { osd=6, addr=... } # set osd_state and addr
    new_state: { osd=6, xorstate=EXISTS } # clear osd_state

Suppose osd6's current osd_state is EXISTS (i.e. osd6 is down).  After
applying new_up_client, osd_state is changed to EXISTS | UP.  Carrying
on with the new_state update, we flip EXISTS and leave osd6 in a weird
"!EXISTS but UP" state.  A non-existent OSD is considered down by the
mapping code

2087    for (i = 0; i < pg->pg_temp.len; i++) {
2088            if (ceph_osd_is_down(osdmap, pg->pg_temp.osds[i])) {
2089                    if (ceph_can_shift_osds(pi))
2090                            continue;
2091
2092                    temp->osds[temp->size++] = CRUSH_ITEM_NONE;

and so requests get directed to the second OSD in the set instead of
the first, resulting in OSD-side errors like:

[WRN] : client.4239 192.168.122.21:0/2444980242 misdirected client.4239.1:2827 pg 2.5df899f2 to osd.4 not [1,4,6] in e680/680

and hung rbds on the client:

[  493.566367] rbd: rbd0: write 400000 at 11cc00000 (0)
[  493.566805] rbd: rbd0:   result -6 xferred 400000
[  493.567011] blk_update_request: I/O error, dev rbd0, sector 9330688

The fix is to decouple application from the decoding and:
- apply new_weight first
- apply new_state before new_up_client
- twiddle osd_state flags if marking in
- clear out some of the state if osd is destroyed

Fixes: http://tracker.ceph.com/issues/14901
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Josh Durgin <jdurgin@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libata: LITE-ON CX1-JB256-HP needs lower max_sectors

commit 1488a1e3828d60d74c9b802a05e24c0487babe4e upstream.

Since 34b48db66e08 ("block: remove artifical max_hw_sectors cap"),
max_sectors is no longer limited to BLK_DEF_MAX_SECTORS and LITE-ON
CX1-JB256-HP keeps timing out with higher max_sectors.  Revert it to
the previous value.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: dgerasimov@gmail.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=121671
Fixes: 34b48db66e08 ("block: remove artifical max_hw_sectors cap")
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: mux: reg: wrong condition checked for of_address_to_resource return value

commit 22ebf00eb56fe77922de8138aa9af9996582c2b3 upstream.

of_address_to_resource return 0 on successful call but
devm_ioremap_resource is called only if it returns non-zero value

Signed-off-by: Lukasz Gemborowski <lukasz.gemborowski@nokia.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

posix_cpu_timer: Exit early when process has been reaped

commit 2c13ce8f6b2f6fd9ba2f9261b1939fc0f62d1307 upstream.

Variable "now" seems to be genuinely used unintialized
if branch

if (CPUCLOCK_PERTHREAD(timer->it_clock)) {

is not taken and branch

if (unlikely(sighand == NULL)) {

is taken. In this case the process has been reaped and the timer is marked as
disarmed anyway. So none of the postprocessing of the sample is
required. Return right away.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Link: http://lkml.kernel.org/r/20160707223911.GA26483@p183.telecom.by
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: fix airspy usb probe error path

commit aa93d1fee85c890a34f2510a310e55ee76a27848 upstream.

Fix a memory leak on probe error of the airspy usb device driver.

The problem is triggered when more than 64 usb devices register with
v4l2 of type VFL_TYPE_SDR or VFL_TYPE_SUBDEV.

The memory leak is caused by the probe function of the airspy driver
mishandeling errors and not freeing the corresponding control structures
when an error occours registering the device to v4l2 core.

A badusb device can emulate 64 of these devices, and then through
continual emulated connect/disconnect of the 65th device, cause the
kernel to run out of RAM and crash the kernel, thus causing a local DOS
vulnerability.

Fixes CVE-2016-5400

Signed-off-by: James Patrick-Evans <james@jmp-e.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipr: Clear interrupt on croc/crocodile when running with LSI

commit 54e430bbd490e18ab116afa4cd90dcc45787b3df upstream.

If we fall back to using LSI on the Croc or Crocodile chip we need to
clear the interrupt so we don't hang the system.

Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SCSI: fix new bug in scsi_dev_info_list string matching

commit 5e7ff2ca7f2da55fe777167849d0c93403bd0dc8 upstream.

Commit b704f70ce200 ("SCSI: fix bug in scsi_dev_info_list matching")
changed the way vendor- and model-string matching was carried out in the
routine that looks up entries in a SCSI devinfo list.  The new matching
code failed to take into account the case of a maximum-length string; in
such cases it could end up testing for a terminating '\0' byte beyond
the end of the memory allocated to the string.  This out-of-bounds bug
was detected by UBSAN.

I don't know if anybody has actually encountered this bug.  The symptom
would be that a device entry in the blacklist might not be matched
properly if it contained an 8-character vendor name or a 16-character
model name.  Such entries certainly exist in scsi_static_device_list.

This patch fixes the problem by adding a check for a maximum-length
string before the '\0' test.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Fixes: b704f70ce200 ("SCSI: fix bug in scsi_dev_info_list matching")
Tested-by: Wilfried Klaebe <linux-kernel@lebenslange-mailadresse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDS: fix rds_tcp_init() error path

commit 3dad5424adfb346c871847d467f97dcdca64ea97 upstream.

If register_pernet_subsys() fails, we shouldn't try to call
unregister_pernet_subsys().

Fixes: 467fa15356 ("RDS-TCP: Support multiple RDS-TCP listen endpoints, one per netns.")
Cc: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: fix oops caused by wrong rtnl dellink usage

commit 25e1ed6e64f52a692ba3191c4fde650aab3ecc07 upstream.

For 'real' hardware CAN devices the netlink interface is used to set CAN
specific communication parameters. Real CAN hardware can not be created nor
removed with the ip tool ...

This patch adds a private dellink function for the CAN device driver interface
that does just nothing.

It's a follow up to commit 993e6f2fd ("can: fix oops caused by wrong rtnl
newlink usage") but for dellink.

Reported-by: ajneu <ajneu1@gmail.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>