-proc execOneLine { test outcome lineno line } {
+# This procedure executes one line of a test case's execution script.
+proc execOneLine { test PRS outcome lineno line } {
set status 0
set resultmsg ""
set retval [ catch { eval exec -keepnewline -- $line } errmsg ]
if { $retval != 0 } {
set code [lindex $::errorCode 0]
set lineno [expr $lineno + 1]
- set errmsg " at RUN: line $lineno\n$::errorInfo"
+ if { $PRS != ""} {
+ set PRS " for $PRS"
+ }
+ set errmsg " at line $lineno\nwhile running: $line\n$errmsg"
switch "$code" {
CHILDSTATUS {
set status [lindex $::errorCode 2]
- if { $status ne 0 } {
- set resultmsg "$test: exit($status)$errmsg"
+ if { $status != 0 } {
+ set resultmsg "$test$PRS\nFailed with exit($status)$errmsg"
}
}
CHILDKILLED {
set signal [lindex $::errorCode 2]
- set resultmsg "$test: signal($signal)$errmsg"
+ set resultmsg "$test$PRS\nFailed with signal($signal)$errmsg"
}
CHILDSUSP {
set signal [lindex $::errorCode 2]
- set resultmsg "$test: suspend($signal)$errmsg"
+ set resultmsg "$test$PRS\nFailed with suspend($signal)$errmsg"
}
POSIX {
set posixNum [lindex $::errorCode 1]
set posixMsg [lindex $::errorCode 2]
- set resultmsg "$test: posix($posixNum,$posixMsg)$errmsg"
+ set resultmsg "$test$PRS\nFailed with posix($posixNum,$posixMsg)$errmsg"
}
NONE {
+ # Any other error such as stderr output of a program, or syntax error in
+ # the RUN line.
+ set resultmsg "$test$PRS\nFailed with unknown error (or has stderr output)$errmsg"
}
default {
+ set resultmsg "$test$PRS\nFailed with unknown error$errmsg"
}
}
- }
+ }
return $resultmsg
}
+# This procedure performs variable substitutions on the RUN: lines of a test
+# cases.
proc substitute { line test tmpFile } {
- global srcroot objroot srcdir objdir subdir target_triplet prcontext
- global llvmgcc llvmgxx global llvmgcc_version llvmgccmajvers
+ global srcroot objroot srcdir objdir subdir target_triplet
+ global llvmgcc llvmgxx llvmgcc_version llvmgccmajvers ocamlopt
global gccpath gxxpath compile_c compile_cxx link shlibext llvmlibsdir
+ global llvmdsymutil valgrind grep gas bugpoint_topts
+ set path [file join $srcdir $subdir]
- set new_line $line
- #replace %prcontext with prcontext.tcl (Must replace before %p)
- regsub -all {%prcontext} $new_line $prcontext new_line
+ # Substitute all Tcl variables.
+ set new_line [subst $line ]
+
+ #replace %% with _#MARKER#_ to make the replacement of %% more predictable
+ regsub -all {%%} $new_line {_#MARKER#_} new_line
+ #replace %llvmgcc_only with actual path to llvmgcc
+ regsub -all {%llvmgcc_only} $new_line "$llvmgcc" new_line
#replace %llvmgcc with actual path to llvmgcc
- regsub -all {%llvmgcc} $new_line "$llvmgcc -emit-llvm" new_line
+ regsub -all {%llvmgcc} $new_line "$llvmgcc -emit-llvm -w" new_line
#replace %llvmgxx with actual path to llvmg++
- regsub -all {%llvmgxx} $new_line "$llvmgxx -emit-llvm" new_line
- #replace %compile_c with C compilation command
- regsub -all {%compile_c} $new_line "$compile_c" new_line
+ regsub -all {%llvmgxx} $new_line "$llvmgxx -emit-llvm -w" new_line
#replace %compile_cxx with C++ compilation command
regsub -all {%compile_cxx} $new_line "$compile_cxx" new_line
+ #replace %compile_c with C compilation command
+ regsub -all {%compile_c} $new_line "$compile_c" new_line
#replace %link with C++ link command
regsub -all {%link} $new_line "$link" new_line
#replace %shlibext with shared library extension
regsub -all {%shlibext} $new_line "$shlibext" new_line
+ #replace %ocamlopt with ocaml compiler command
+ regsub -all {%ocamlopt} $new_line "$ocamlopt" new_line
+ #replace %llvmdsymutil with dsymutil command
+ regsub -all {%llvmdsymutil} $new_line "$llvmdsymutil" new_line
#replace %llvmlibsdir with configure library directory
regsub -all {%llvmlibsdir} $new_line "$llvmlibsdir" new_line
- #replace %p with path to source,
+ #replace %bugpoint_topts with actual bugpoint target options
+ regsub -all {%bugpoint_topts} $new_line "$bugpoint_topts" new_line
+ #replace %p with path to source,
regsub -all {%p} $new_line [file join $srcdir $subdir] new_line
#replace %s with filename
regsub -all {%s} $new_line $test new_line
#replace %t with temp filenames
- regsub -all {%t} $new_line [file join Output $tmpFile] new_line
+ regsub -all {%t} $new_line $tmpFile new_line
+ #replace %abs_tmp with absolute temp filenames
+ regsub -all {%abs_tmp} $new_line [file join [pwd] $tmpFile] new_line
+ #replace _#MARKER#_ with %
+ regsub -all {_#MARKER#_} $new_line % new_line
+
+ #replace grep with GNU grep
+ regsub -all { grep } $new_line " $grep " new_line
+ #replace as with GNU as
+ regsub -all {\| as } $new_line "| $gas " new_line
+
+ #valgind related stuff
+# regsub -all {bugpoint } $new_line "$valgrind bugpoint " new_line
+ regsub -all {llc } $new_line "$valgrind llc " new_line
+ regsub -all {lli } $new_line "$valgrind lli " new_line
+ regsub -all {llvm-ar } $new_line "$valgrind llvm-ar " new_line
+ regsub -all {llvm-as } $new_line "$valgrind llvm-as " new_line
+ regsub -all {llvm-bcanalyzer } $new_line "$valgrind llvm-bcanalyzer " new_line
+ regsub -all {llvm-dis } $new_line "$valgrind llvm-dis " new_line
+ regsub -all {llvm-extract } $new_line "$valgrind llvm-extract " new_line
+ regsub -all {llvm-ld } $new_line "$valgrind llvm-ld " new_line
+ regsub -all {llvm-link } $new_line "$valgrind llvm-link " new_line
+ regsub -all {llvm-nm } $new_line "$valgrind llvm-nm " new_line
+ regsub -all {llvm-prof } $new_line "$valgrind llvm-prof " new_line
+ regsub -all {llvm-ranlib } $new_line "$valgrind llvm-ranlib " new_line
+ regsub -all {([^a-zA-Z_-])opt } $new_line "\\1$valgrind opt " new_line
+ regsub -all {^opt } $new_line "$valgrind opt " new_line
+ regsub -all {tblgen } $new_line "$valgrind tblgen " new_line
+ regsub -all "not $valgrind " $new_line "$valgrind not " new_line
+
return $new_line
}
-proc llvm-runtest { programs } {
- global srcroot objroot srcdir objdir subdir target_triplet
+# This procedure runs the set of tests for the test_source_files array.
+proc RunLLVMTests { test_source_files } {
+ global srcroot objroot srcdir objdir subdir target_triplet llvmgcc_version
set timeout 60
set path [file join $objdir $subdir]
-
+
#Make Output Directory if it does not exist already
if { [file exists path] } {
cd $path
file mkdir $path
cd $path
}
-
+
file mkdir Output
+ cd Output
- foreach test $programs {
+ foreach test $test_source_files {
#Should figure out best way to set the timeout
#set timeout 40
-
+
set filename [file tail $test]
+ verbose "ABOUT TO RUN: $filename" 2
set outcome PASS
set tmpFile "$filename.tmp"
+ # Mark that it should not be XFAIL for this target.
+ set targetPASS 0
+
#set hasRunline bool to check if testcase has a runline
set numLines 0
# Open the test file and start reading lines
set testFileId [ open $test r]
set runline ""
+ set PRNUMS ""
foreach line [split [read $testFileId] \n] {
- #see if this is our run line
- if {[regexp {END.[ *]$} $line match endofscript]} {
+ # if its the END. line then stop parsing (optimization for big files)
+ if {[regexp {END.[[:space:]]*$} $line match endofscript]} {
break
- } elseif {[regexp {RUN: *([^\\]+)(\\)$} $line match oneline suffix]} {
+
+ # if the line is continued, concatenate and continue the loop
+ } elseif {[regexp {RUN: *(.+)(\\)$} $line match oneline suffix]} {
set runline "$runline$oneline "
- } elseif {[regexp {RUN: *([^&]+)(&&)?} $line match oneline suffix]} {
+
+ # if its a terminating RUN: line then do substitution on the whole line
+ # and then save the line.
+ } elseif {[regexp {RUN: *(.+)$} $line match oneline suffix]} {
set runline "$runline$oneline"
set runline [ substitute $runline $test $tmpFile ]
set lines($numLines) $runline
set numLines [expr $numLines + 1]
set runline ""
+
+ # if its an PR line, save the problem report number
+ } elseif {[regexp {PR([0-9]+)} $line match prnum]} {
+ if {$PRNUMS == ""} {
+ set PRNUMS "PR$prnum"
+ } else {
+ set PRNUMS "$PRNUMS,$prnum"
+ }
+ # if its an XFAIL line, see if we should be XFAILing or not.
} elseif {[regexp {XFAIL:[ *](.+)} $line match targets]} {
set targets
+ #split up target if more then 1 specified
+ foreach target [split $targets ,] {
+ if { $target == "*" } {
+ if {$targetPASS != 1} {
+ set outcome XFAIL
+ }
+ } elseif { [regexp $target $target_triplet match] } {
+ if {$targetPASS != 1} {
+ set outcome XFAIL
+ }
+ } elseif { [regexp {llvmgcc(([0-9]+)|([0-9]+[.][0-9]+))} $target match submatch submatch2] } {
+ if { [regexp ^($submatch)$|^(($submatch)(\.)) $llvmgcc_version match] } {
+ if {$targetPASS != 1} {
+ set outcome XFAIL
+ }
+ }
+ }
+ }
+ } elseif {[regexp {XTARGET:[ *](.+)} $line match targets]} {
+ set targets
+
#split up target if more then 1 specified
foreach target [split $targets ,] {
if { [regexp {\*} $target match] } {
- set outcome XFAIL
+ set targetPASS 1
+ set outcome PASS
} elseif { [regexp $target $target_triplet match] } {
- set outcome XFAIL
+ set targetPASS 1
+ set outcome PASS
} elseif { [regexp {llvmgcc(([0-9]+)|([0-9]+[.][0-9]+))} $target match submatch submatch2] } {
if { [regexp ^($submatch)$|^(($submatch)(\.)) $llvmgcc_version match] } {
- set outcome XFAIL
+ set targetPASS 1
+ set outcome PASS
}
}
}
}
}
-
+
# Done reading the script
close $testFileId
-
-
+
+
if { $numLines == 0 } {
fail "$test: \nDoes not have a RUN line\n"
} else {
set failed 0
for { set i 0 } { $i < $numLines } { set i [ expr $i + 1 ] } {
regsub ^.*RUN:(.*) $lines($i) \1 theLine
- set theLine [subst $theLine ]
- set resultmsg [execOneLine $test $outcome $i $theLine ]
+ set resultmsg [execOneLine $test $PRNUMS $outcome $i $theLine ]
if { $resultmsg != "" } {
if { $outcome == "XFAIL" } {
xfail "$resultmsg"
break
}
}
- if { !$failed } {
+ if { $failed } {
+ continue
+ } else {
+ if { $PRNUMS != "" } {
+ set PRNUMS " for $PRNUMS"
+ }
if { $outcome == "XFAIL" } {
- xpass "$test"
+ xpass "$test$PRNUMS"
} else {
- pass "$resultmsg"
+ pass "$test$PRNUMS"
}
}
}
}
}
+
+# This procedure provides an interface to check the LLVMGCC_LANGS makefile
+# variable to see if llvm-gcc supports compilation of a particular language.
+proc llvm_gcc_supports { lang } {
+ global llvmgcc llvmgcc_langs
+ # validate the language choices and determine the name of the compiler
+ # component responsible for determining if the compiler has been built.
+ switch "$lang" {
+ ada { set file gnat1 }
+ c { set file cc1 }
+ c++ { set file cc1plus }
+ objc { set file cc1obj }
+ obj-c++ { set file cc1objplus }
+ fortran { set file f951 }
+ default { return 0 }
+ }
+ foreach supported_lang [split "$llvmgcc_langs" ,] {
+ if { "$lang" == "$supported_lang" } {
+ # FIXME: Knowing it is configured is not enough. We should do two more
+ # checks here. First, we need to run llvm-gcc -print-prog-name=$file to
+ # get the path to the compiler. If we don't get a path, the language isn't
+ # properly configured or built. If we do get a path, we should check to
+ # make sure that it is executable and perhaps even try executing it.
+ return 1;
+ }
+ }
+ return 0;
+}
+
+# This procedure provides an interface to check the TARGETS_TO_BUILD makefile
+# variable to see if a particular target has been configured to build. This
+# helps avoid running tests for targets that aren't available.
+proc llvm_supports_target { tgtName } {
+ global TARGETS_TO_BUILD
+ foreach target [split $TARGETS_TO_BUILD] {
+ if { [regexp $tgtName $target match] } {
+ return 1
+ }
+ }
+ return 0
+}
+
+# This procedure provides an interface to check the BINDINGS_TO_BUILD makefile
+# variable to see if a particular binding has been configured to build.
+proc llvm_supports_binding { name } {
+ global llvm_bindings
+ foreach item [split $llvm_bindings] {
+ if { [regexp $name $item match] } {
+ return 1
+ }
+ }
+ return 0
+}
projects / oota-llvm.git / blobdiff