; Check the low end of the CH range.
define void @f1(i32 %lhs, i16 *%src, i32 *%dst) {
-; CHECK: f1:
+; CHECK-LABEL: f1:
; CHECK: ch %r2, 0(%r3)
; CHECK: br %r14
- %half = load i16 *%src
+ %half = load i16 , i16 *%src
%rhs = sext i16 %half to i32
%cond = icmp slt i32 %lhs, %rhs
%res = select i1 %cond, i32 100, i32 200
; Check the high end of the aligned CH range.
define void @f2(i32 %lhs, i16 *%src, i32 *%dst) {
-; CHECK: f2:
+; CHECK-LABEL: f2:
; CHECK: ch %r2, 4094(%r3)
; CHECK: br %r14
- %ptr = getelementptr i16 *%src, i64 2047
- %half = load i16 *%ptr
+ %ptr = getelementptr i16, i16 *%src, i64 2047
+ %half = load i16 , i16 *%ptr
%rhs = sext i16 %half to i32
%cond = icmp slt i32 %lhs, %rhs
%res = select i1 %cond, i32 100, i32 200
; Check the next halfword up, which should use CHY instead of CH.
define void @f3(i32 %lhs, i16 *%src, i32 *%dst) {
-; CHECK: f3:
+; CHECK-LABEL: f3:
; CHECK: chy %r2, 4096(%r3)
; CHECK: br %r14
- %ptr = getelementptr i16 *%src, i64 2048
- %half = load i16 *%ptr
+ %ptr = getelementptr i16, i16 *%src, i64 2048
+ %half = load i16 , i16 *%ptr
%rhs = sext i16 %half to i32
%cond = icmp slt i32 %lhs, %rhs
%res = select i1 %cond, i32 100, i32 200
; Check the high end of the aligned CHY range.
define void @f4(i32 %lhs, i16 *%src, i32 *%dst) {
-; CHECK: f4:
+; CHECK-LABEL: f4:
; CHECK: chy %r2, 524286(%r3)
; CHECK: br %r14
- %ptr = getelementptr i16 *%src, i64 262143
- %half = load i16 *%ptr
+ %ptr = getelementptr i16, i16 *%src, i64 262143
+ %half = load i16 , i16 *%ptr
%rhs = sext i16 %half to i32
%cond = icmp slt i32 %lhs, %rhs
%res = select i1 %cond, i32 100, i32 200
; Check the next halfword up, which needs separate address logic.
; Other sequences besides this one would be OK.
define void @f5(i32 %lhs, i16 *%src, i32 *%dst) {
-; CHECK: f5:
+; CHECK-LABEL: f5:
; CHECK: agfi %r3, 524288
; CHECK: ch %r2, 0(%r3)
; CHECK: br %r14
- %ptr = getelementptr i16 *%src, i64 262144
- %half = load i16 *%ptr
+ %ptr = getelementptr i16, i16 *%src, i64 262144
+ %half = load i16 , i16 *%ptr
%rhs = sext i16 %half to i32
%cond = icmp slt i32 %lhs, %rhs
%res = select i1 %cond, i32 100, i32 200
; Check the high end of the negative aligned CHY range.
define void @f6(i32 %lhs, i16 *%src, i32 *%dst) {
-; CHECK: f6:
+; CHECK-LABEL: f6:
; CHECK: chy %r2, -2(%r3)
; CHECK: br %r14
- %ptr = getelementptr i16 *%src, i64 -1
- %half = load i16 *%ptr
+ %ptr = getelementptr i16, i16 *%src, i64 -1
+ %half = load i16 , i16 *%ptr
%rhs = sext i16 %half to i32
%cond = icmp slt i32 %lhs, %rhs
%res = select i1 %cond, i32 100, i32 200
; Check the low end of the CHY range.
define void @f7(i32 %lhs, i16 *%src, i32 *%dst) {
-; CHECK: f7:
+; CHECK-LABEL: f7:
; CHECK: chy %r2, -524288(%r3)
; CHECK: br %r14
- %ptr = getelementptr i16 *%src, i64 -262144
- %half = load i16 *%ptr
+ %ptr = getelementptr i16, i16 *%src, i64 -262144
+ %half = load i16 , i16 *%ptr
%rhs = sext i16 %half to i32
%cond = icmp slt i32 %lhs, %rhs
%res = select i1 %cond, i32 100, i32 200
; Check the next halfword down, which needs separate address logic.
; Other sequences besides this one would be OK.
define void @f8(i32 %lhs, i16 *%src, i32 *%dst) {
-; CHECK: f8:
+; CHECK-LABEL: f8:
; CHECK: agfi %r3, -524290
; CHECK: ch %r2, 0(%r3)
; CHECK: br %r14
- %ptr = getelementptr i16 *%src, i64 -262145
- %half = load i16 *%ptr
+ %ptr = getelementptr i16, i16 *%src, i64 -262145
+ %half = load i16 , i16 *%ptr
%rhs = sext i16 %half to i32
%cond = icmp slt i32 %lhs, %rhs
%res = select i1 %cond, i32 100, i32 200
; Check that CH allows an index.
define void @f9(i32 %lhs, i64 %base, i64 %index, i32 *%dst) {
-; CHECK: f9:
+; CHECK-LABEL: f9:
; CHECK: ch %r2, 4094({{%r4,%r3|%r3,%r4}})
; CHECK: br %r14
%add1 = add i64 %base, %index
%add2 = add i64 %add1, 4094
%ptr = inttoptr i64 %add2 to i16 *
- %half = load i16 *%ptr
+ %half = load i16 , i16 *%ptr
%rhs = sext i16 %half to i32
%cond = icmp slt i32 %lhs, %rhs
%res = select i1 %cond, i32 100, i32 200
; Check that CHY allows an index.
define void @f10(i32 %lhs, i64 %base, i64 %index, i32 *%dst) {
-; CHECK: f10:
+; CHECK-LABEL: f10:
; CHECK: chy %r2, 4096({{%r4,%r3|%r3,%r4}})
; CHECK: br %r14
%add1 = add i64 %base, %index
%add2 = add i64 %add1, 4096
%ptr = inttoptr i64 %add2 to i16 *
- %half = load i16 *%ptr
+ %half = load i16 , i16 *%ptr
%rhs = sext i16 %half to i32
%cond = icmp slt i32 %lhs, %rhs
%res = select i1 %cond, i32 100, i32 200
store i32 %res, i32 *%dst
ret void
}
+
+; Check the comparison can be reversed if that allows CH to be used.
+define double @f11(double %a, double %b, i32 %rhs, i16 *%src) {
+; CHECK-LABEL: f11:
+; CHECK: ch %r2, 0(%r3)
+; CHECK-NEXT: jh {{\.L.*}}
+; CHECK: ldr %f0, %f2
+; CHECK: br %r14
+ %half = load i16 , i16 *%src
+ %lhs = sext i16 %half to i32
+ %cond = icmp slt i32 %lhs, %rhs
+ %res = select i1 %cond, double %a, double %b
+ ret double %res
+}