#include "llvm/Pass.h"
#include "llvm/IR/LegacyPassManager.h"
#include "llvm/ADT/SetOperations.h"
+#include "llvm/ADT/SetVector.h"
#include "llvm/ADT/Statistic.h"
#include "llvm/Analysis/LoopPass.h"
#include "llvm/Analysis/LoopInfo.h"
namespace {
-/** An analysis pass whose purpose is to identify each of the backedges in
- the function which require a safepoint poll to be inserted. */
-struct PlaceBackedgeSafepointsImpl : public LoopPass {
+/// An analysis pass whose purpose is to identify each of the backedges in
+/// the function which require a safepoint poll to be inserted.
+struct PlaceBackedgeSafepointsImpl : public FunctionPass {
static char ID;
/// The output of the pass - gives a list of each backedge (described by
/// True unless we're running spp-no-calls in which case we need to disable
/// the call dependend placement opts.
bool CallSafepointsEnabled;
+
+ ScalarEvolution *SE = nullptr;
+ DominatorTree *DT = nullptr;
+ LoopInfo *LI = nullptr;
+
PlaceBackedgeSafepointsImpl(bool CallSafepoints = false)
- : LoopPass(ID), CallSafepointsEnabled(CallSafepoints) {
+ : FunctionPass(ID), CallSafepointsEnabled(CallSafepoints) {
initializePlaceBackedgeSafepointsImplPass(*PassRegistry::getPassRegistry());
}
- bool runOnLoop(Loop *, LPPassManager &LPM) override;
+ bool runOnLoop(Loop *);
+ void runOnLoopAndSubLoops(Loop *L) {
+ // Visit all the subloops
+ for (auto I = L->begin(), E = L->end(); I != E; I++)
+ runOnLoopAndSubLoops(*I);
+ runOnLoop(L);
+ }
+ bool runOnFunction(Function &F) override {
+ SE = &getAnalysis<ScalarEvolution>();
+ DT = &getAnalysis<DominatorTreeWrapperPass>().getDomTree();
+ LI = &getAnalysis<LoopInfoWrapperPass>().getLoopInfo();
+ for (auto I = LI->begin(), E = LI->end(); I != E; I++) {
+ runOnLoopAndSubLoops(*I);
+ }
+ return false;
+ }
+
void getAnalysisUsage(AnalysisUsage &AU) const override {
- // needed for determining if the loop is finite
+ AU.addRequired<DominatorTreeWrapperPass>();
AU.addRequired<ScalarEvolution>();
- // to ensure each edge has a single backedge
- // TODO: is this still required?
- AU.addRequiredID(LoopSimplifyID);
-
+ AU.addRequired<LoopInfoWrapperPass>();
// We no longer modify the IR at all in this pass. Thus all
// analysis are preserved.
AU.setPreservesAll();
static cl::opt<bool> NoBackedge("spp-no-backedge", cl::Hidden, cl::init(false));
namespace {
-struct PlaceSafepoints : public ModulePass {
+struct PlaceSafepoints : public FunctionPass {
static char ID; // Pass identification, replacement for typeid
- PlaceSafepoints() : ModulePass(ID) {
+ PlaceSafepoints() : FunctionPass(ID) {
initializePlaceSafepointsPass(*PassRegistry::getPassRegistry());
}
- bool runOnModule(Module &M) override {
- bool modified = false;
- for (Function &F : M) {
- modified |= runOnFunction(F);
- }
- return modified;
- }
- bool runOnFunction(Function &F);
+ bool runOnFunction(Function &F) override;
void getAnalysisUsage(AnalysisUsage &AU) const override {
// We modify the graph wholesale (inlining, block insertion, etc). We
// Insert a safepoint poll immediately before the given instruction. Does
// not handle the parsability of state at the runtime call, that's the
// callers job.
-static void
-InsertSafepointPoll(DominatorTree &DT, Instruction *after,
+static void
+InsertSafepointPoll(Instruction *after,
std::vector<CallSite> &ParsePointsNeeded /*rval*/);
static bool isGCLeafFunction(const CallSite &CS);
BasicBlock *Current = Pred;
while (true) {
for (Instruction &I : *Current) {
- if (CallSite CS = &I)
+ if (auto CS = CallSite(&I))
// Note: Technically, needing a safepoint isn't quite the right
// condition here. We should instead be checking if the target method
// has an
}
}
-bool PlaceBackedgeSafepointsImpl::runOnLoop(Loop *L, LPPassManager &LPM) {
- ScalarEvolution *SE = &getAnalysis<ScalarEvolution>();
-
- // Loop through all predecessors of the loop header and identify all
- // backedges. We need to place a safepoint on every backedge (potentially).
- // Note: Due to LoopSimplify there should only be one. Assert? Or can we
- // relax this?
+bool PlaceBackedgeSafepointsImpl::runOnLoop(Loop *L) {
+ // Loop through all loop latches (branches controlling backedges). We need
+ // to place a safepoint on every backedge (potentially).
+ // Note: In common usage, there will be only one edge due to LoopSimplify
+ // having run sometime earlier in the pipeline, but this code must be correct
+ // w.r.t. loops with multiple backedges.
BasicBlock *header = L->getHeader();
-
- // TODO: Use the analysis pass infrastructure for this. There is no reason
- // to recalculate this here.
- DominatorTree DT;
- DT.recalculate(*header->getParent());
-
- bool modified = false;
- for (BasicBlock *pred : predecessors(header)) {
- if (!L->contains(pred)) {
- // This is not a backedge, it's coming from outside the loop
- continue;
- }
+ SmallVector<BasicBlock*, 16> LoopLatches;
+ L->getLoopLatches(LoopLatches);
+ for (BasicBlock *pred : LoopLatches) {
+ assert(L->contains(pred));
// Make a policy decision about whether this loop needs a safepoint or
// not. Note that this is about unburdening the optimizer in loops, not
continue;
}
if (CallSafepointsEnabled &&
- containsUnconditionalCallSafepoint(L, header, pred, DT)) {
+ containsUnconditionalCallSafepoint(L, header, pred, *DT)) {
// Note: This is only semantically legal since we won't do any further
// IPO or inlining before the actual call insertion.. If we hadn't, we
// might latter loose this call safepoint.
// not help runtime performance that much, but it might help our ability to
// optimize the inner loop.
- // We're unconditionally going to modify this loop.
- modified = true;
-
// Safepoint insertion would involve creating a new basic block (as the
// target of the current backedge) which does the safepoint (of all live
// variables) and branches to the true header
PollLocations.push_back(term);
}
- return modified;
+ return false;
}
static Instruction *findLocationForEntrySafepoint(Function &F,
// We need to stop going forward as soon as we see a call that can
// grow the stack (i.e. the call target has a non-zero frame
// size).
- if (CallSite CS = cursor) {
- (void)CS; // Silence an unused variable warning by gcc 4.8.2
+ if (CallSite(cursor)) {
if (IntrinsicInst *II = dyn_cast<IntrinsicInst>(cursor)) {
// llvm.assume(...) are not really calls.
if (II->getIntrinsicID() == Intrinsic::assume) {
continue;
}
+ // llvm.frameescape() intrinsic is not a real call. The intrinsic can
+ // exist only in the entry block.
+ // Inserting a statepoint before llvm.frameescape() may split the
+ // entry block, and push the intrinsic out of the entry block.
+ if (II->getIntrinsicID() == Intrinsic::frameescape) {
+ continue;
+ }
}
break;
}
}
BasicBlock *BB = cursor->getParent();
- SplitBlock(BB, cursor, nullptr);
+ SplitBlock(BB, cursor, &DT);
- // Note: SplitBlock modifies the DT. Simply passing a Pass (which is a
- // module pass) is not enough.
- DT.recalculate(F);
-#ifndef NDEBUG
// SplitBlock updates the DT
- DT.verifyDomTree();
-#endif
+ DEBUG(DT.verifyDomTree());
return BB->getTerminator();
}
static bool enableBackedgeSafepoints(Function &F) { return !NoBackedge; }
static bool enableCallSafepoints(Function &F) { return !NoCall; }
+// Normalize basic block to make it ready to be target of invoke statepoint.
+// Ensure that 'BB' does not have phi nodes. It may require spliting it.
+static BasicBlock *normalizeForInvokeSafepoint(BasicBlock *BB,
+ BasicBlock *InvokeParent) {
+ BasicBlock *ret = BB;
+
+ if (!BB->getUniquePredecessor()) {
+ ret = SplitBlockPredecessors(BB, InvokeParent, "");
+ }
+
+ // Now that 'ret' has unique predecessor we can safely remove all phi nodes
+ // from it
+ FoldSingleEntryPHINodes(ret);
+ assert(!isa<PHINode>(ret->begin()));
+
+ return ret;
+}
bool PlaceSafepoints::runOnFunction(Function &F) {
if (F.isDeclaration() || F.empty()) {
// actually insert parse points yet. That will be done for all polls and
// calls in a single pass.
- // Note: With the migration, we need to recompute this for each 'pass'. Once
- // we merge these, we'll do it once before the analysis
DominatorTree DT;
+ DT.recalculate(F);
+ SmallVector<Instruction *, 16> PollsNeeded;
std::vector<CallSite> ParsePointNeeded;
if (enableBackedgeSafepoints(F)) {
PlaceBackedgeSafepointsImpl *PBS =
new PlaceBackedgeSafepointsImpl(CanAssumeCallSafepoints);
FPM.add(PBS);
- // Note: While the analysis pass itself won't modify the IR, LoopSimplify
- // (which it depends on) may. i.e. analysis must be recalculated after run
FPM.run(F);
// We preserve dominance information when inserting the poll, otherwise
// we'd have to recalculate this on every insert
DT.recalculate(F);
+ auto &PollLocations = PBS->PollLocations;
+
+ auto OrderByBBName = [](Instruction *a, Instruction *b) {
+ return a->getParent()->getName() < b->getParent()->getName();
+ };
+ // We need the order of list to be stable so that naming ends up stable
+ // when we split edges. This makes test cases much easier to write.
+ std::sort(PollLocations.begin(), PollLocations.end(), OrderByBBName);
+
+ // We can sometimes end up with duplicate poll locations. This happens if
+ // a single loop is visited more than once. The fact this happens seems
+ // wrong, but it does happen for the split-backedge.ll test case.
+ PollLocations.erase(std::unique(PollLocations.begin(),
+ PollLocations.end()),
+ PollLocations.end());
+
// Insert a poll at each point the analysis pass identified
- for (size_t i = 0; i < PBS->PollLocations.size(); i++) {
+ // The poll location must be the terminator of a loop latch block.
+ for (TerminatorInst *Term : PollLocations) {
// We are inserting a poll, the function is modified
modified = true;
-
- // The poll location must be the terminator of a loop latch block.
- TerminatorInst *Term = PBS->PollLocations[i];
-
- std::vector<CallSite> ParsePoints;
+
if (SplitBackedge) {
// Split the backedge of the loop and insert the poll within that new
// basic block. This creates a loop with two latches per original
// Since this is a latch, at least one of the successors must dominate
// it. Its possible that we have a) duplicate edges to the same header
// and b) edges to distinct loop headers. We need to insert pools on
- // each. (Note: This still relies on LoopSimplify.)
- DenseSet<BasicBlock *> Headers;
+ // each.
+ SetVector<BasicBlock *> Headers;
for (unsigned i = 0; i < Term->getNumSuccessors(); i++) {
BasicBlock *Succ = Term->getSuccessor(i);
if (DT.dominates(Succ, Term->getParent())) {
// The split loop structure here is so that we only need to recalculate
// the dominator tree once. Alternatively, we could just keep it up to
// date and use a more natural merged loop.
- DenseSet<BasicBlock *> SplitBackedges;
+ SetVector<BasicBlock *> SplitBackedges;
for (BasicBlock *Header : Headers) {
- BasicBlock *NewBB = SplitEdge(Term->getParent(), Header, nullptr);
- SplitBackedges.insert(NewBB);
- }
- DT.recalculate(F);
- for (BasicBlock *NewBB : SplitBackedges) {
- InsertSafepointPoll(DT, NewBB->getTerminator(), ParsePoints);
+ BasicBlock *NewBB = SplitEdge(Term->getParent(), Header, &DT);
+ PollsNeeded.push_back(NewBB->getTerminator());
NumBackedgeSafepoints++;
}
-
} else {
// Split the latch block itself, right before the terminator.
- InsertSafepointPoll(DT, Term, ParsePoints);
+ PollsNeeded.push_back(Term);
NumBackedgeSafepoints++;
}
-
- // Record the parse points for later use
- ParsePointNeeded.insert(ParsePointNeeded.end(), ParsePoints.begin(),
- ParsePoints.end());
}
}
if (enableEntrySafepoints(F)) {
- DT.recalculate(F);
- Instruction *term = findLocationForEntrySafepoint(F, DT);
- if (!term) {
+ Instruction *Location = findLocationForEntrySafepoint(F, DT);
+ if (!Location) {
// policy choice not to insert?
} else {
- std::vector<CallSite> RuntimeCalls;
- InsertSafepointPoll(DT, term, RuntimeCalls);
+ PollsNeeded.push_back(Location);
modified = true;
NumEntrySafepoints++;
- ParsePointNeeded.insert(ParsePointNeeded.end(), RuntimeCalls.begin(),
- RuntimeCalls.end());
}
}
+ // Now that we've identified all the needed safepoint poll locations, insert
+ // safepoint polls themselves.
+ for (Instruction *PollLocation : PollsNeeded) {
+ std::vector<CallSite> RuntimeCalls;
+ InsertSafepointPoll(PollLocation, RuntimeCalls);
+ ParsePointNeeded.insert(ParsePointNeeded.end(), RuntimeCalls.begin(),
+ RuntimeCalls.end());
+ }
+ PollsNeeded.clear(); // make sure we don't accidentally use
+ // The dominator tree has been invalidated by the inlining performed in the
+ // above loop. TODO: Teach the inliner how to update the dom tree?
+ DT.recalculate(F);
+
if (enableCallSafepoints(F)) {
- DT.recalculate(F);
std::vector<CallSite> Calls;
findCallSafepoints(F, Calls);
NumCallSafepoints += Calls.size();
unique_unsorted(ParsePointNeeded);
// Any parse point (no matter what source) will be handled here
- DT.recalculate(F); // Needed?
// We're about to start modifying the function
if (!ParsePointNeeded.empty())
Results.reserve(ParsePointNeeded.size());
for (size_t i = 0; i < ParsePointNeeded.size(); i++) {
CallSite &CS = ParsePointNeeded[i];
+
+ // For invoke statepoints we need to remove all phi nodes at the normal
+ // destination block.
+ // Reason for this is that we can place gc_result only after last phi node
+ // in basic block. We will get malformed code after RAUW for the
+ // gc_result if one of this phi nodes uses result from the invoke.
+ if (InvokeInst *Invoke = dyn_cast<InvokeInst>(CS.getInstruction())) {
+ normalizeForInvokeSafepoint(Invoke->getNormalDest(),
+ Invoke->getParent());
+ }
+
Value *GCResult = ReplaceWithStatepoint(CS, nullptr);
Results.push_back(GCResult);
}
CallSite &CS = ParsePointNeeded[i];
Value *GCResult = Results[i];
if (GCResult) {
- // In case if we inserted result in a different basic block than the
- // original safepoint (this can happen for invokes). We need to be sure
- // that
- // original result value was not used in any of the phi nodes at the
- // beginning of basic block with gc result. Because we know that all such
- // blocks will have single predecessor we can safely assume that all phi
- // nodes have single entry (because of normalizeBBForInvokeSafepoint).
- // Just remove them all here.
- if (CS.isInvoke()) {
- FoldSingleEntryPHINodes(cast<Instruction>(GCResult)->getParent(),
- nullptr);
- assert(
- !isa<PHINode>(cast<Instruction>(GCResult)->getParent()->begin()));
- }
+ // Can not RAUW for the gc result in case of phi nodes preset.
+ assert(!isa<PHINode>(cast<Instruction>(GCResult)->getParent()->begin()));
// Replace all uses with the new call
CS.getInstruction()->replaceAllUsesWith(GCResult);
char PlaceBackedgeSafepointsImpl::ID = 0;
char PlaceSafepoints::ID = 0;
-ModulePass *llvm::createPlaceSafepointsPass() { return new PlaceSafepoints(); }
+FunctionPass *llvm::createPlaceSafepointsPass() {
+ return new PlaceSafepoints();
+}
INITIALIZE_PASS_BEGIN(PlaceBackedgeSafepointsImpl,
"place-backedge-safepoints-impl",
"Place Backedge Safepoints", false, false)
INITIALIZE_PASS_DEPENDENCY(ScalarEvolution)
-INITIALIZE_PASS_DEPENDENCY(LoopSimplify)
+INITIALIZE_PASS_DEPENDENCY(DominatorTreeWrapperPass)
+INITIALIZE_PASS_DEPENDENCY(LoopInfoWrapperPass)
INITIALIZE_PASS_END(PlaceBackedgeSafepointsImpl,
"place-backedge-safepoints-impl",
"Place Backedge Safepoints", false, false)
}
static void
-InsertSafepointPoll(DominatorTree &DT, Instruction *term,
+InsertSafepointPoll(Instruction *term,
std::vector<CallSite> &ParsePointsNeeded /*rval*/) {
Module *M = term->getParent()->getParent()->getParent();
assert(M);
}
after++;
assert(after != poll->getParent()->end() && "must have successor");
- assert(DT.dominates(before, after) && "trivially true");
// do the actual inlining
InlineFunctionInfo IFI;
"malformed poll function");
scanInlinedCode(&*(start), &*(after), calls, BBs);
-
- // Recompute since we've invalidated cached data. Conceptually we
- // shouldn't need to do this, but implementation wise we appear to. Needed
- // so we can insert safepoints correctly.
- // TODO: update more cheaply
- DT.recalculate(*after->getParent()->getParent());
-
assert(!calls.empty() && "slow path not found for safepoint poll");
// Record the fact we need a parsable state at the runtime call contained in
assert(ParsePointsNeeded.size() <= calls.size());
}
-// Normalize basic block to make it ready to be target of invoke statepoint.
-// It means spliting it to have single predecessor. Return newly created BB
-// ready to be successor of invoke statepoint.
-static BasicBlock *normalizeBBForInvokeSafepoint(BasicBlock *BB,
- BasicBlock *InvokeParent) {
- BasicBlock *ret = BB;
-
- if (!BB->getUniquePredecessor()) {
- ret = SplitBlockPredecessors(BB, InvokeParent, "");
- }
-
- // Another requirement for such basic blocks is to not have any phi nodes.
- // Since we just ensured that new BB will have single predecessor,
- // all phi nodes in it will have one value. Here it would be naturall place
- // to
- // remove them all. But we can not do this because we are risking to remove
- // one of the values stored in liveset of another statepoint. We will do it
- // later after placing all safepoints.
-
- return ret;
-}
-
/// Replaces the given call site (Call or Invoke) with a gc.statepoint
/// intrinsic with an empty deoptimization arguments list. This does
/// NOT do explicit relocation for GC support.
static Value *ReplaceWithStatepoint(const CallSite &CS, /* to replace */
Pass *P) {
- BasicBlock *BB = CS.getInstruction()->getParent();
- Function *F = BB->getParent();
- Module *M = F->getParent();
- assert(M && "must be set");
+ assert(CS.getInstruction()->getParent()->getParent()->getParent() &&
+ "must be set");
// TODO: technically, a pass is not allowed to get functions from within a
// function pass since it might trigger a new function addition. Refactor
// this logic out to the initialization of the pass. Doesn't appear to
// matter in practice.
- // Fill in the one generic type'd argument (the function is also vararg)
- std::vector<Type *> argTypes;
- argTypes.push_back(CS.getCalledValue()->getType());
-
- Function *gc_statepoint_decl = Intrinsic::getDeclaration(
- M, Intrinsic::experimental_gc_statepoint, argTypes);
-
// Then go ahead and use the builder do actually do the inserts. We insert
// immediately before the previous instruction under the assumption that all
// arguments will be available here. We can't insert afterwards since we may
// be replacing a terminator.
- Instruction *insertBefore = CS.getInstruction();
- IRBuilder<> Builder(insertBefore);
- // First, create the statepoint (with all live ptrs as arguments).
- std::vector<llvm::Value *> args;
- // target, #call args, unused, call args..., #deopt args, deopt args..., gc args...
- Value *Target = CS.getCalledValue();
- args.push_back(Target);
- int callArgSize = CS.arg_size();
- args.push_back(
- ConstantInt::get(Type::getInt32Ty(M->getContext()), callArgSize));
- // TODO: add a 'Needs GC-rewrite' later flag
- args.push_back(ConstantInt::get(Type::getInt32Ty(M->getContext()), 0));
-
- // Copy all the arguments of the original call
- args.insert(args.end(), CS.arg_begin(), CS.arg_end());
-
- // # of deopt arguments: this pass currently does not support the
- // identification of deopt arguments. If this is interesting to you,
- // please ask on llvm-dev.
- args.push_back(ConstantInt::get(Type::getInt32Ty(M->getContext()), 0));
+ IRBuilder<> Builder(CS.getInstruction());
// Note: The gc args are not filled in at this time, that's handled by
// RewriteStatepointsForGC (which is currently under review).
// Create the statepoint given all the arguments
- Instruction *token = nullptr;
- AttributeSet return_attributes;
+ Instruction *Token = nullptr;
+
+ uint64_t ID;
+ uint32_t NumPatchBytes;
+
+ AttributeSet OriginalAttrs = CS.getAttributes();
+ Attribute AttrID =
+ OriginalAttrs.getAttribute(AttributeSet::FunctionIndex, "statepoint-id");
+ Attribute AttrNumPatchBytes = OriginalAttrs.getAttribute(
+ AttributeSet::FunctionIndex, "statepoint-num-patch-bytes");
+
+ AttrBuilder AttrsToRemove;
+ bool HasID = AttrID.isStringAttribute() &&
+ !AttrID.getValueAsString().getAsInteger(10, ID);
+
+ if (HasID)
+ AttrsToRemove.addAttribute("statepoint-id");
+ else
+ ID = 0xABCDEF00;
+
+ bool HasNumPatchBytes =
+ AttrNumPatchBytes.isStringAttribute() &&
+ !AttrNumPatchBytes.getValueAsString().getAsInteger(10, NumPatchBytes);
+
+ if (HasNumPatchBytes)
+ AttrsToRemove.addAttribute("statepoint-num-patch-bytes");
+ else
+ NumPatchBytes = 0;
+
+ OriginalAttrs = OriginalAttrs.removeAttributes(
+ CS.getInstruction()->getContext(), AttributeSet::FunctionIndex,
+ AttrsToRemove);
+
+ Value *StatepointTarget = NumPatchBytes == 0
+ ? CS.getCalledValue()
+ : ConstantPointerNull::get(cast<PointerType>(
+ CS.getCalledValue()->getType()));
+
if (CS.isCall()) {
- CallInst *toReplace = cast<CallInst>(CS.getInstruction());
- CallInst *call =
- Builder.CreateCall(gc_statepoint_decl, args, "safepoint_token");
- call->setTailCall(toReplace->isTailCall());
- call->setCallingConv(toReplace->getCallingConv());
-
- // Before we have to worry about GC semantics, all attributes are legal
- AttributeSet new_attrs = toReplace->getAttributes();
- // In case if we can handle this set of sttributes - set up function attrs
- // directly on statepoint and return attrs later for gc_result intrinsic.
- call->setAttributes(new_attrs.getFnAttributes());
- return_attributes = new_attrs.getRetAttributes();
- // TODO: handle param attributes
-
- token = call;
+ CallInst *ToReplace = cast<CallInst>(CS.getInstruction());
+ CallInst *Call = Builder.CreateGCStatepointCall(
+ ID, NumPatchBytes, StatepointTarget,
+ makeArrayRef(CS.arg_begin(), CS.arg_end()), None, None,
+ "safepoint_token");
+ Call->setTailCall(ToReplace->isTailCall());
+ Call->setCallingConv(ToReplace->getCallingConv());
- // Put the following gc_result and gc_relocate calls immediately after the
- // the old call (which we're about to delete)
- BasicBlock::iterator next(toReplace);
- assert(BB->end() != next && "not a terminator, must have next");
- next++;
- Instruction *IP = &*(next);
- Builder.SetInsertPoint(IP);
- Builder.SetCurrentDebugLocation(IP->getDebugLoc());
+ // In case if we can handle this set of attributes - set up function
+ // attributes directly on statepoint and return attributes later for
+ // gc_result intrinsic.
+ Call->setAttributes(OriginalAttrs.getFnAttributes());
+
+ Token = Call;
+ // Put the following gc_result and gc_relocate calls immediately after the
+ // the old call (which we're about to delete).
+ assert(ToReplace->getNextNode() && "not a terminator, must have next");
+ Builder.SetInsertPoint(ToReplace->getNextNode());
+ Builder.SetCurrentDebugLocation(ToReplace->getNextNode()->getDebugLoc());
} else if (CS.isInvoke()) {
- InvokeInst *toReplace = cast<InvokeInst>(CS.getInstruction());
+ InvokeInst *ToReplace = cast<InvokeInst>(CS.getInstruction());
// Insert the new invoke into the old block. We'll remove the old one in a
// moment at which point this will become the new terminator for the
// original block.
- InvokeInst *invoke = InvokeInst::Create(
- gc_statepoint_decl, toReplace->getNormalDest(),
- toReplace->getUnwindDest(), args, "", toReplace->getParent());
- invoke->setCallingConv(toReplace->getCallingConv());
+ Builder.SetInsertPoint(ToReplace->getParent());
+ InvokeInst *Invoke = Builder.CreateGCStatepointInvoke(
+ ID, NumPatchBytes, StatepointTarget, ToReplace->getNormalDest(),
+ ToReplace->getUnwindDest(), makeArrayRef(CS.arg_begin(), CS.arg_end()),
+ None, None, "safepoint_token");
+
+ Invoke->setCallingConv(ToReplace->getCallingConv());
- // Currently we will fail on parameter attributes and on certain
- // function attributes.
- AttributeSet new_attrs = toReplace->getAttributes();
- // In case if we can handle this set of sttributes - set up function attrs
- // directly on statepoint and return attrs later for gc_result intrinsic.
- invoke->setAttributes(new_attrs.getFnAttributes());
- return_attributes = new_attrs.getRetAttributes();
+ // In case if we can handle this set of attributes - set up function
+ // attributes directly on statepoint and return attributes later for
+ // gc_result intrinsic.
+ Invoke->setAttributes(OriginalAttrs.getFnAttributes());
- token = invoke;
+ Token = Invoke;
// We'll insert the gc.result into the normal block
- BasicBlock *normalDest = normalizeBBForInvokeSafepoint(
- toReplace->getNormalDest(), invoke->getParent());
- Instruction *IP = &*(normalDest->getFirstInsertionPt());
+ BasicBlock *NormalDest = ToReplace->getNormalDest();
+ // Can not insert gc.result in case of phi nodes preset.
+ // Should have removed this cases prior to runnning this function
+ assert(!isa<PHINode>(NormalDest->begin()));
+ Instruction *IP = &*(NormalDest->getFirstInsertionPt());
Builder.SetInsertPoint(IP);
} else {
llvm_unreachable("unexpect type of CallSite");
}
- assert(token);
+ assert(Token);
// Handle the return value of the original call - update all uses to use a
// gc_result hanging off the statepoint node we just inserted
// Only add the gc_result iff there is actually a used result
if (!CS.getType()->isVoidTy() && !CS.getInstruction()->use_empty()) {
- Instruction *gc_result = nullptr;
- std::vector<Type *> types; // one per 'any' type
- types.push_back(CS.getType()); // result type
- Intrinsic::ID Id = Intrinsic::experimental_gc_result;
- Value *gc_result_func = Intrinsic::getDeclaration(M, Id, types);
-
- std::vector<Value *> args;
- args.push_back(token);
- gc_result = Builder.CreateCall(
- gc_result_func, args,
- CS.getInstruction()->hasName() ? CS.getInstruction()->getName() : "");
-
- cast<CallInst>(gc_result)->setAttributes(return_attributes);
- return gc_result;
+ std::string TakenName =
+ CS.getInstruction()->hasName() ? CS.getInstruction()->getName() : "";
+ CallInst *GCResult = Builder.CreateGCResult(Token, CS.getType(), TakenName);
+ GCResult->setAttributes(OriginalAttrs.getRetAttributes());
+ return GCResult;
} else {
// No return value for the call.
return nullptr;