// computations derived from them) into simpler forms suitable for subsequent
// analysis and transformation.
//
-// This transformation makes the following changes to each loop with an
-// identifiable induction variable:
-// 1. All loops are transformed to have a SINGLE canonical induction variable
-// which starts at zero and steps by one.
-// 2. The canonical induction variable is guaranteed to be the first PHI node
-// in the loop header block.
-// 3. The canonical induction variable is guaranteed to be in a wide enough
-// type so that IV expressions need not be (directly) zero-extended or
-// sign-extended.
-// 4. Any pointer arithmetic recurrences are raised to use array subscripts.
-//
// If the trip count of a loop is computable, this pass also makes the following
// changes:
// 1. The exit condition for the loop is canonicalized to compare the
// purpose of the loop is to compute the exit value of some derived
// expression, this transformation will make the loop dead.
//
-// This transformation should be followed by strength reduction after all of the
-// desired loop transformations have been performed.
-//
//===----------------------------------------------------------------------===//
#define DEBUG_TYPE "indvars"
#include "llvm/Transforms/Scalar.h"
-#include "llvm/BasicBlock.h"
-#include "llvm/Constants.h"
-#include "llvm/Instructions.h"
-#include "llvm/IntrinsicInst.h"
-#include "llvm/LLVMContext.h"
-#include "llvm/Type.h"
+#include "llvm/ADT/DenseMap.h"
+#include "llvm/ADT/SmallVector.h"
+#include "llvm/ADT/Statistic.h"
#include "llvm/Analysis/Dominators.h"
-#include "llvm/Analysis/IVUsers.h"
-#include "llvm/Analysis/ScalarEvolutionExpander.h"
#include "llvm/Analysis/LoopInfo.h"
#include "llvm/Analysis/LoopPass.h"
+#include "llvm/Analysis/ScalarEvolutionExpander.h"
+#include "llvm/IR/BasicBlock.h"
+#include "llvm/IR/Constants.h"
+#include "llvm/IR/DataLayout.h"
+#include "llvm/IR/Instructions.h"
+#include "llvm/IR/IntrinsicInst.h"
+#include "llvm/IR/LLVMContext.h"
+#include "llvm/IR/Type.h"
#include "llvm/Support/CFG.h"
#include "llvm/Support/CommandLine.h"
#include "llvm/Support/Debug.h"
#include "llvm/Support/raw_ostream.h"
-#include "llvm/Transforms/Utils/Local.h"
+#include "llvm/Target/TargetLibraryInfo.h"
#include "llvm/Transforms/Utils/BasicBlockUtils.h"
-#include "llvm/Target/TargetData.h"
-#include "llvm/ADT/SmallVector.h"
-#include "llvm/ADT/Statistic.h"
-#include "llvm/ADT/STLExtras.h"
+#include "llvm/Transforms/Utils/Local.h"
+#include "llvm/Transforms/Utils/SimplifyIndVar.h"
using namespace llvm;
-STATISTIC(NumRemoved , "Number of aux indvars removed");
STATISTIC(NumWidened , "Number of indvars widened");
-STATISTIC(NumInserted , "Number of canonical indvars added");
STATISTIC(NumReplaced , "Number of exit values replaced");
STATISTIC(NumLFTR , "Number of loop exit tests replaced");
-STATISTIC(NumElimIdentity, "Number of IV identities eliminated");
STATISTIC(NumElimExt , "Number of IV sign/zero extends eliminated");
-STATISTIC(NumElimRem , "Number of IV remainder operations eliminated");
-STATISTIC(NumElimCmp , "Number of IV comparisons eliminated");
+STATISTIC(NumElimIV , "Number of congruent IVs eliminated");
-static cl::opt<bool> DisableIVRewrite(
- "disable-iv-rewrite", cl::Hidden,
- cl::desc("Disable canonical induction variable rewriting"));
+// Trip count verification can be enabled by default under NDEBUG if we
+// implement a strong expression equivalence checker in SCEV. Until then, we
+// use the verify-indvars flag, which may assert in some cases.
+static cl::opt<bool> VerifyIndvars(
+ "verify-indvars", cl::Hidden,
+ cl::desc("Verify the ScalarEvolution result after running indvars"));
namespace {
class IndVarSimplify : public LoopPass {
- IVUsers *IU;
LoopInfo *LI;
ScalarEvolution *SE;
DominatorTree *DT;
- TargetData *TD;
+ DataLayout *TD;
+ TargetLibraryInfo *TLI;
SmallVector<WeakVH, 16> DeadInsts;
bool Changed;
public:
static char ID; // Pass identification, replacement for typeid
- IndVarSimplify() : LoopPass(ID), IU(0), LI(0), SE(0), DT(0), TD(0),
+ IndVarSimplify() : LoopPass(ID), LI(0), SE(0), DT(0), TD(0),
Changed(false) {
initializeIndVarSimplifyPass(*PassRegistry::getPassRegistry());
}
AU.addRequired<ScalarEvolution>();
AU.addRequiredID(LoopSimplifyID);
AU.addRequiredID(LCSSAID);
- if (!DisableIVRewrite)
- AU.addRequired<IVUsers>();
AU.addPreserved<ScalarEvolution>();
AU.addPreservedID(LoopSimplifyID);
AU.addPreservedID(LCSSAID);
- if (!DisableIVRewrite)
- AU.addPreserved<IVUsers>();
AU.setPreservesCFG();
}
private:
- bool isValidRewrite(Value *FromVal, Value *ToVal);
+ virtual void releaseMemory() {
+ DeadInsts.clear();
+ }
- void SimplifyIVUsers(SCEVExpander &Rewriter);
- void SimplifyIVUsersNoRewrite(Loop *L, SCEVExpander &Rewriter);
+ bool isValidRewrite(Value *FromVal, Value *ToVal);
- bool EliminateIVUser(Instruction *UseInst, Instruction *IVOperand);
- void EliminateIVComparison(ICmpInst *ICmp, Value *IVOperand);
- void EliminateIVRemainder(BinaryOperator *Rem,
- Value *IVOperand,
- bool IsSigned);
- bool isSimpleIVUser(Instruction *I, const Loop *L);
+ void HandleFloatingPointIV(Loop *L, PHINode *PH);
void RewriteNonIntegerIVs(Loop *L);
- ICmpInst *LinearFunctionTestReplace(Loop *L, const SCEV *BackedgeTakenCount,
- PHINode *IndVar,
- SCEVExpander &Rewriter);
+ void SimplifyAndExtend(Loop *L, SCEVExpander &Rewriter, LPPassManager &LPM);
void RewriteLoopExitValues(Loop *L, SCEVExpander &Rewriter);
- void RewriteIVExpressions(Loop *L, SCEVExpander &Rewriter);
+ Value *LinearFunctionTestReplace(Loop *L, const SCEV *BackedgeTakenCount,
+ PHINode *IndVar, SCEVExpander &Rewriter);
void SinkUnusedInvariants(Loop *L);
-
- void HandleFloatingPointIV(Loop *L, PHINode *PH);
};
}
INITIALIZE_PASS_DEPENDENCY(ScalarEvolution)
INITIALIZE_PASS_DEPENDENCY(LoopSimplify)
INITIALIZE_PASS_DEPENDENCY(LCSSA)
-INITIALIZE_PASS_DEPENDENCY(IVUsers)
INITIALIZE_PASS_END(IndVarSimplify, "indvars",
"Induction Variable Simplification", false, false)
// base of a recurrence. This handles the case in which SCEV expansion
// converts a pointer type recurrence into a nonrecurrent pointer base
// indexed by an integer recurrence.
+
+ // If the GEP base pointer is a vector of pointers, abort.
+ if (!FromPtr->getType()->isPointerTy() || !ToPtr->getType()->isPointerTy())
+ return false;
+
const SCEV *FromBase = SE->getPointerBase(SE->getSCEV(FromPtr));
const SCEV *ToBase = SE->getPointerBase(SE->getSCEV(ToPtr));
if (FromBase == ToBase)
return true;
}
-/// canExpandBackedgeTakenCount - Return true if this loop's backedge taken
-/// count expression can be safely and cheaply expanded into an instruction
-/// sequence that can be used by LinearFunctionTestReplace.
-static bool canExpandBackedgeTakenCount(Loop *L, ScalarEvolution *SE) {
- const SCEV *BackedgeTakenCount = SE->getBackedgeTakenCount(L);
- if (isa<SCEVCouldNotCompute>(BackedgeTakenCount) ||
- BackedgeTakenCount->isZero())
- return false;
-
- if (!L->getExitingBlock())
- return false;
-
- // Can't rewrite non-branch yet.
- BranchInst *BI = dyn_cast<BranchInst>(L->getExitingBlock()->getTerminator());
- if (!BI)
- return false;
+/// Determine the insertion point for this user. By default, insert immediately
+/// before the user. SCEVExpander or LICM will hoist loop invariants out of the
+/// loop. For PHI nodes, there may be multiple uses, so compute the nearest
+/// common dominator for the incoming blocks.
+static Instruction *getInsertPointForUses(Instruction *User, Value *Def,
+ DominatorTree *DT) {
+ PHINode *PHI = dyn_cast<PHINode>(User);
+ if (!PHI)
+ return User;
+
+ Instruction *InsertPt = 0;
+ for (unsigned i = 0, e = PHI->getNumIncomingValues(); i != e; ++i) {
+ if (PHI->getIncomingValue(i) != Def)
+ continue;
- // Special case: If the backedge-taken count is a UDiv, it's very likely a
- // UDiv that ScalarEvolution produced in order to compute a precise
- // expression, rather than a UDiv from the user's code. If we can't find a
- // UDiv in the code with some simple searching, assume the former and forego
- // rewriting the loop.
- if (isa<SCEVUDivExpr>(BackedgeTakenCount)) {
- ICmpInst *OrigCond = dyn_cast<ICmpInst>(BI->getCondition());
- if (!OrigCond) return false;
- const SCEV *R = SE->getSCEV(OrigCond->getOperand(1));
- R = SE->getMinusSCEV(R, SE->getConstant(R->getType(), 1));
- if (R != BackedgeTakenCount) {
- const SCEV *L = SE->getSCEV(OrigCond->getOperand(0));
- L = SE->getMinusSCEV(L, SE->getConstant(L->getType(), 1));
- if (L != BackedgeTakenCount)
- return false;
+ BasicBlock *InsertBB = PHI->getIncomingBlock(i);
+ if (!InsertPt) {
+ InsertPt = InsertBB->getTerminator();
+ continue;
}
+ InsertBB = DT->findNearestCommonDominator(InsertPt->getParent(), InsertBB);
+ InsertPt = InsertBB->getTerminator();
}
+ assert(InsertPt && "Missing phi operand");
+ assert((!isa<Instruction>(Def) ||
+ DT->dominates(cast<Instruction>(Def), InsertPt)) &&
+ "def does not dominate all uses");
+ return InsertPt;
+}
+
+//===----------------------------------------------------------------------===//
+// RewriteNonIntegerIVs and helpers. Prefer integer IVs.
+//===----------------------------------------------------------------------===//
+
+/// ConvertToSInt - Convert APF to an integer, if possible.
+static bool ConvertToSInt(const APFloat &APF, int64_t &IntVal) {
+ bool isExact = false;
+ // See if we can convert this to an int64_t
+ uint64_t UIntVal;
+ if (APF.convertToInteger(&UIntVal, 64, true, APFloat::rmTowardZero,
+ &isExact) != APFloat::opOK || !isExact)
+ return false;
+ IntVal = UIntVal;
return true;
}
-/// getBackedgeIVType - Get the widest type used by the loop test after peeking
-/// through Truncs.
+/// HandleFloatingPointIV - If the loop has floating induction variable
+/// then insert corresponding integer induction variable if possible.
+/// For example,
+/// for(double i = 0; i < 10000; ++i)
+/// bar(i)
+/// is converted into
+/// for(int i = 0; i < 10000; ++i)
+/// bar((double)i);
///
-/// TODO: Unnecessary once LinearFunctionTestReplace is removed.
-static const Type *getBackedgeIVType(Loop *L) {
- if (!L->getExitingBlock())
- return 0;
-
- // Can't rewrite non-branch yet.
- BranchInst *BI = dyn_cast<BranchInst>(L->getExitingBlock()->getTerminator());
- if (!BI)
- return 0;
+void IndVarSimplify::HandleFloatingPointIV(Loop *L, PHINode *PN) {
+ unsigned IncomingEdge = L->contains(PN->getIncomingBlock(0));
+ unsigned BackEdge = IncomingEdge^1;
- ICmpInst *Cond = dyn_cast<ICmpInst>(BI->getCondition());
- if (!Cond)
- return 0;
+ // Check incoming value.
+ ConstantFP *InitValueVal =
+ dyn_cast<ConstantFP>(PN->getIncomingValue(IncomingEdge));
- const Type *Ty = 0;
- for(User::op_iterator OI = Cond->op_begin(), OE = Cond->op_end();
- OI != OE; ++OI) {
- assert((!Ty || Ty == (*OI)->getType()) && "bad icmp operand types");
- TruncInst *Trunc = dyn_cast<TruncInst>(*OI);
- if (!Trunc)
- continue;
+ int64_t InitValue;
+ if (!InitValueVal || !ConvertToSInt(InitValueVal->getValueAPF(), InitValue))
+ return;
- return Trunc->getSrcTy();
- }
- return Ty;
-}
+ // Check IV increment. Reject this PN if increment operation is not
+ // an add or increment value can not be represented by an integer.
+ BinaryOperator *Incr =
+ dyn_cast<BinaryOperator>(PN->getIncomingValue(BackEdge));
+ if (Incr == 0 || Incr->getOpcode() != Instruction::FAdd) return;
-/// LinearFunctionTestReplace - This method rewrites the exit condition of the
-/// loop to be a canonical != comparison against the incremented loop induction
-/// variable. This pass is able to rewrite the exit tests of any loop where the
-/// SCEV analysis can determine a loop-invariant trip count of the loop, which
-/// is actually a much broader range than just linear tests.
-ICmpInst *IndVarSimplify::
-LinearFunctionTestReplace(Loop *L,
- const SCEV *BackedgeTakenCount,
- PHINode *IndVar,
- SCEVExpander &Rewriter) {
- assert(canExpandBackedgeTakenCount(L, SE) && "precondition");
- BranchInst *BI = cast<BranchInst>(L->getExitingBlock()->getTerminator());
+ // If this is not an add of the PHI with a constantfp, or if the constant fp
+ // is not an integer, bail out.
+ ConstantFP *IncValueVal = dyn_cast<ConstantFP>(Incr->getOperand(1));
+ int64_t IncValue;
+ if (IncValueVal == 0 || Incr->getOperand(0) != PN ||
+ !ConvertToSInt(IncValueVal->getValueAPF(), IncValue))
+ return;
- // If the exiting block is not the same as the backedge block, we must compare
- // against the preincremented value, otherwise we prefer to compare against
- // the post-incremented value.
- Value *CmpIndVar;
- const SCEV *RHS = BackedgeTakenCount;
- if (L->getExitingBlock() == L->getLoopLatch()) {
- // Add one to the "backedge-taken" count to get the trip count.
- // If this addition may overflow, we have to be more pessimistic and
- // cast the induction variable before doing the add.
- const SCEV *Zero = SE->getConstant(BackedgeTakenCount->getType(), 0);
- const SCEV *N =
- SE->getAddExpr(BackedgeTakenCount,
- SE->getConstant(BackedgeTakenCount->getType(), 1));
- if ((isa<SCEVConstant>(N) && !N->isZero()) ||
- SE->isLoopEntryGuardedByCond(L, ICmpInst::ICMP_NE, N, Zero)) {
- // No overflow. Cast the sum.
- RHS = SE->getTruncateOrZeroExtend(N, IndVar->getType());
- } else {
- // Potential overflow. Cast before doing the add.
- RHS = SE->getTruncateOrZeroExtend(BackedgeTakenCount,
- IndVar->getType());
- RHS = SE->getAddExpr(RHS,
- SE->getConstant(IndVar->getType(), 1));
- }
+ // Check Incr uses. One user is PN and the other user is an exit condition
+ // used by the conditional terminator.
+ Value::use_iterator IncrUse = Incr->use_begin();
+ Instruction *U1 = cast<Instruction>(*IncrUse++);
+ if (IncrUse == Incr->use_end()) return;
+ Instruction *U2 = cast<Instruction>(*IncrUse++);
+ if (IncrUse != Incr->use_end()) return;
- // The BackedgeTaken expression contains the number of times that the
- // backedge branches to the loop header. This is one less than the
- // number of times the loop executes, so use the incremented indvar.
- CmpIndVar = IndVar->getIncomingValueForBlock(L->getExitingBlock());
- } else {
- // We have to use the preincremented value...
- RHS = SE->getTruncateOrZeroExtend(BackedgeTakenCount,
- IndVar->getType());
- CmpIndVar = IndVar;
- }
+ // Find exit condition, which is an fcmp. If it doesn't exist, or if it isn't
+ // only used by a branch, we can't transform it.
+ FCmpInst *Compare = dyn_cast<FCmpInst>(U1);
+ if (!Compare)
+ Compare = dyn_cast<FCmpInst>(U2);
+ if (Compare == 0 || !Compare->hasOneUse() ||
+ !isa<BranchInst>(Compare->use_back()))
+ return;
- // Expand the code for the iteration count.
- assert(SE->isLoopInvariant(RHS, L) &&
- "Computed iteration count is not loop invariant!");
- Value *ExitCnt = Rewriter.expandCodeFor(RHS, IndVar->getType(), BI);
+ BranchInst *TheBr = cast<BranchInst>(Compare->use_back());
- // Insert a new icmp_ne or icmp_eq instruction before the branch.
- ICmpInst::Predicate Opcode;
- if (L->contains(BI->getSuccessor(0)))
- Opcode = ICmpInst::ICMP_NE;
- else
- Opcode = ICmpInst::ICMP_EQ;
+ // We need to verify that the branch actually controls the iteration count
+ // of the loop. If not, the new IV can overflow and no one will notice.
+ // The branch block must be in the loop and one of the successors must be out
+ // of the loop.
+ assert(TheBr->isConditional() && "Can't use fcmp if not conditional");
+ if (!L->contains(TheBr->getParent()) ||
+ (L->contains(TheBr->getSuccessor(0)) &&
+ L->contains(TheBr->getSuccessor(1))))
+ return;
- DEBUG(dbgs() << "INDVARS: Rewriting loop exit condition to:\n"
- << " LHS:" << *CmpIndVar << '\n'
- << " op:\t"
- << (Opcode == ICmpInst::ICMP_NE ? "!=" : "==") << "\n"
- << " RHS:\t" << *RHS << "\n");
- ICmpInst *Cond = new ICmpInst(BI, Opcode, CmpIndVar, ExitCnt, "exitcond");
+ // If it isn't a comparison with an integer-as-fp (the exit value), we can't
+ // transform it.
+ ConstantFP *ExitValueVal = dyn_cast<ConstantFP>(Compare->getOperand(1));
+ int64_t ExitValue;
+ if (ExitValueVal == 0 ||
+ !ConvertToSInt(ExitValueVal->getValueAPF(), ExitValue))
+ return;
- Value *OrigCond = BI->getCondition();
- // It's tempting to use replaceAllUsesWith here to fully replace the old
- // comparison, but that's not immediately safe, since users of the old
- // comparison may not be dominated by the new comparison. Instead, just
- // update the branch to use the new comparison; in the common case this
- // will make old comparison dead.
- BI->setCondition(Cond);
- DeadInsts.push_back(OrigCond);
+ // Find new predicate for integer comparison.
+ CmpInst::Predicate NewPred = CmpInst::BAD_ICMP_PREDICATE;
+ switch (Compare->getPredicate()) {
+ default: return; // Unknown comparison.
+ case CmpInst::FCMP_OEQ:
+ case CmpInst::FCMP_UEQ: NewPred = CmpInst::ICMP_EQ; break;
+ case CmpInst::FCMP_ONE:
+ case CmpInst::FCMP_UNE: NewPred = CmpInst::ICMP_NE; break;
+ case CmpInst::FCMP_OGT:
+ case CmpInst::FCMP_UGT: NewPred = CmpInst::ICMP_SGT; break;
+ case CmpInst::FCMP_OGE:
+ case CmpInst::FCMP_UGE: NewPred = CmpInst::ICMP_SGE; break;
+ case CmpInst::FCMP_OLT:
+ case CmpInst::FCMP_ULT: NewPred = CmpInst::ICMP_SLT; break;
+ case CmpInst::FCMP_OLE:
+ case CmpInst::FCMP_ULE: NewPred = CmpInst::ICMP_SLE; break;
+ }
- ++NumLFTR;
- Changed = true;
- return Cond;
-}
+ // We convert the floating point induction variable to a signed i32 value if
+ // we can. This is only safe if the comparison will not overflow in a way
+ // that won't be trapped by the integer equivalent operations. Check for this
+ // now.
+ // TODO: We could use i64 if it is native and the range requires it.
-/// RewriteLoopExitValues - Check to see if this loop has a computable
-/// loop-invariant execution count. If so, this means that we can compute the
-/// final value of any expressions that are recurrent in the loop, and
-/// substitute the exit values from the loop into any instructions outside of
-/// the loop that use the final values of the current expressions.
-///
-/// This is mostly redundant with the regular IndVarSimplify activities that
-/// happen later, except that it's more powerful in some cases, because it's
-/// able to brute-force evaluate arbitrary instructions as long as they have
-/// constant operands at the beginning of the loop.
-void IndVarSimplify::RewriteLoopExitValues(Loop *L, SCEVExpander &Rewriter) {
- // Verify the input to the pass in already in LCSSA form.
- assert(L->isLCSSAForm(*DT));
+ // The start/stride/exit values must all fit in signed i32.
+ if (!isInt<32>(InitValue) || !isInt<32>(IncValue) || !isInt<32>(ExitValue))
+ return;
- SmallVector<BasicBlock*, 8> ExitBlocks;
- L->getUniqueExitBlocks(ExitBlocks);
+ // If not actually striding (add x, 0.0), avoid touching the code.
+ if (IncValue == 0)
+ return;
- // Find all values that are computed inside the loop, but used outside of it.
- // Because of LCSSA, these values will only occur in LCSSA PHI Nodes. Scan
- // the exit blocks of the loop to find them.
- for (unsigned i = 0, e = ExitBlocks.size(); i != e; ++i) {
- BasicBlock *ExitBB = ExitBlocks[i];
+ // Positive and negative strides have different safety conditions.
+ if (IncValue > 0) {
+ // If we have a positive stride, we require the init to be less than the
+ // exit value.
+ if (InitValue >= ExitValue)
+ return;
- // If there are no PHI nodes in this exit block, then no values defined
- // inside the loop are used on this path, skip it.
- PHINode *PN = dyn_cast<PHINode>(ExitBB->begin());
- if (!PN) continue;
+ uint32_t Range = uint32_t(ExitValue-InitValue);
+ // Check for infinite loop, either:
+ // while (i <= Exit) or until (i > Exit)
+ if (NewPred == CmpInst::ICMP_SLE || NewPred == CmpInst::ICMP_SGT) {
+ if (++Range == 0) return; // Range overflows.
+ }
- unsigned NumPreds = PN->getNumIncomingValues();
+ unsigned Leftover = Range % uint32_t(IncValue);
- // Iterate over all of the PHI nodes.
- BasicBlock::iterator BBI = ExitBB->begin();
- while ((PN = dyn_cast<PHINode>(BBI++))) {
- if (PN->use_empty())
- continue; // dead use, don't replace it
+ // If this is an equality comparison, we require that the strided value
+ // exactly land on the exit value, otherwise the IV condition will wrap
+ // around and do things the fp IV wouldn't.
+ if ((NewPred == CmpInst::ICMP_EQ || NewPred == CmpInst::ICMP_NE) &&
+ Leftover != 0)
+ return;
- // SCEV only supports integer expressions for now.
- if (!PN->getType()->isIntegerTy() && !PN->getType()->isPointerTy())
- continue;
+ // If the stride would wrap around the i32 before exiting, we can't
+ // transform the IV.
+ if (Leftover != 0 && int32_t(ExitValue+IncValue) < ExitValue)
+ return;
- // It's necessary to tell ScalarEvolution about this explicitly so that
- // it can walk the def-use list and forget all SCEVs, as it may not be
- // watching the PHI itself. Once the new exit value is in place, there
- // may not be a def-use connection between the loop and every instruction
- // which got a SCEVAddRecExpr for that loop.
- SE->forgetValue(PN);
+ } else {
+ // If we have a negative stride, we require the init to be greater than the
+ // exit value.
+ if (InitValue <= ExitValue)
+ return;
+
+ uint32_t Range = uint32_t(InitValue-ExitValue);
+ // Check for infinite loop, either:
+ // while (i >= Exit) or until (i < Exit)
+ if (NewPred == CmpInst::ICMP_SGE || NewPred == CmpInst::ICMP_SLT) {
+ if (++Range == 0) return; // Range overflows.
+ }
+
+ unsigned Leftover = Range % uint32_t(-IncValue);
+
+ // If this is an equality comparison, we require that the strided value
+ // exactly land on the exit value, otherwise the IV condition will wrap
+ // around and do things the fp IV wouldn't.
+ if ((NewPred == CmpInst::ICMP_EQ || NewPred == CmpInst::ICMP_NE) &&
+ Leftover != 0)
+ return;
+
+ // If the stride would wrap around the i32 before exiting, we can't
+ // transform the IV.
+ if (Leftover != 0 && int32_t(ExitValue+IncValue) > ExitValue)
+ return;
+ }
+
+ IntegerType *Int32Ty = Type::getInt32Ty(PN->getContext());
+
+ // Insert new integer induction variable.
+ PHINode *NewPHI = PHINode::Create(Int32Ty, 2, PN->getName()+".int", PN);
+ NewPHI->addIncoming(ConstantInt::get(Int32Ty, InitValue),
+ PN->getIncomingBlock(IncomingEdge));
+
+ Value *NewAdd =
+ BinaryOperator::CreateAdd(NewPHI, ConstantInt::get(Int32Ty, IncValue),
+ Incr->getName()+".int", Incr);
+ NewPHI->addIncoming(NewAdd, PN->getIncomingBlock(BackEdge));
+
+ ICmpInst *NewCompare = new ICmpInst(TheBr, NewPred, NewAdd,
+ ConstantInt::get(Int32Ty, ExitValue),
+ Compare->getName());
+
+ // In the following deletions, PN may become dead and may be deleted.
+ // Use a WeakVH to observe whether this happens.
+ WeakVH WeakPH = PN;
+
+ // Delete the old floating point exit comparison. The branch starts using the
+ // new comparison.
+ NewCompare->takeName(Compare);
+ Compare->replaceAllUsesWith(NewCompare);
+ RecursivelyDeleteTriviallyDeadInstructions(Compare, TLI);
+
+ // Delete the old floating point increment.
+ Incr->replaceAllUsesWith(UndefValue::get(Incr->getType()));
+ RecursivelyDeleteTriviallyDeadInstructions(Incr, TLI);
+
+ // If the FP induction variable still has uses, this is because something else
+ // in the loop uses its value. In order to canonicalize the induction
+ // variable, we chose to eliminate the IV and rewrite it in terms of an
+ // int->fp cast.
+ //
+ // We give preference to sitofp over uitofp because it is faster on most
+ // platforms.
+ if (WeakPH) {
+ Value *Conv = new SIToFPInst(NewPHI, PN->getType(), "indvar.conv",
+ PN->getParent()->getFirstInsertionPt());
+ PN->replaceAllUsesWith(Conv);
+ RecursivelyDeleteTriviallyDeadInstructions(PN, TLI);
+ }
+ Changed = true;
+}
+
+void IndVarSimplify::RewriteNonIntegerIVs(Loop *L) {
+ // First step. Check to see if there are any floating-point recurrences.
+ // If there are, change them into integer recurrences, permitting analysis by
+ // the SCEV routines.
+ //
+ BasicBlock *Header = L->getHeader();
+
+ SmallVector<WeakVH, 8> PHIs;
+ for (BasicBlock::iterator I = Header->begin();
+ PHINode *PN = dyn_cast<PHINode>(I); ++I)
+ PHIs.push_back(PN);
+
+ for (unsigned i = 0, e = PHIs.size(); i != e; ++i)
+ if (PHINode *PN = dyn_cast_or_null<PHINode>(&*PHIs[i]))
+ HandleFloatingPointIV(L, PN);
+
+ // If the loop previously had floating-point IV, ScalarEvolution
+ // may not have been able to compute a trip count. Now that we've done some
+ // re-writing, the trip count may be computable.
+ if (Changed)
+ SE->forgetLoop(L);
+}
+
+//===----------------------------------------------------------------------===//
+// RewriteLoopExitValues - Optimize IV users outside the loop.
+// As a side effect, reduces the amount of IV processing within the loop.
+//===----------------------------------------------------------------------===//
+
+/// RewriteLoopExitValues - Check to see if this loop has a computable
+/// loop-invariant execution count. If so, this means that we can compute the
+/// final value of any expressions that are recurrent in the loop, and
+/// substitute the exit values from the loop into any instructions outside of
+/// the loop that use the final values of the current expressions.
+///
+/// This is mostly redundant with the regular IndVarSimplify activities that
+/// happen later, except that it's more powerful in some cases, because it's
+/// able to brute-force evaluate arbitrary instructions as long as they have
+/// constant operands at the beginning of the loop.
+void IndVarSimplify::RewriteLoopExitValues(Loop *L, SCEVExpander &Rewriter) {
+ // Verify the input to the pass in already in LCSSA form.
+ assert(L->isLCSSAForm(*DT));
+
+ SmallVector<BasicBlock*, 8> ExitBlocks;
+ L->getUniqueExitBlocks(ExitBlocks);
+
+ // Find all values that are computed inside the loop, but used outside of it.
+ // Because of LCSSA, these values will only occur in LCSSA PHI Nodes. Scan
+ // the exit blocks of the loop to find them.
+ for (unsigned i = 0, e = ExitBlocks.size(); i != e; ++i) {
+ BasicBlock *ExitBB = ExitBlocks[i];
+
+ // If there are no PHI nodes in this exit block, then no values defined
+ // inside the loop are used on this path, skip it.
+ PHINode *PN = dyn_cast<PHINode>(ExitBB->begin());
+ if (!PN) continue;
+
+ unsigned NumPreds = PN->getNumIncomingValues();
+
+ // Iterate over all of the PHI nodes.
+ BasicBlock::iterator BBI = ExitBB->begin();
+ while ((PN = dyn_cast<PHINode>(BBI++))) {
+ if (PN->use_empty())
+ continue; // dead use, don't replace it
+
+ // SCEV only supports integer expressions for now.
+ if (!PN->getType()->isIntegerTy() && !PN->getType()->isPointerTy())
+ continue;
+
+ // It's necessary to tell ScalarEvolution about this explicitly so that
+ // it can walk the def-use list and forget all SCEVs, as it may not be
+ // watching the PHI itself. Once the new exit value is in place, there
+ // may not be a def-use connection between the loop and every instruction
+ // which got a SCEVAddRecExpr for that loop.
+ SE->forgetValue(PN);
// Iterate over all of the values in all the PHI nodes.
for (unsigned i = 0; i != NumPreds; ++i) {
// and varies predictably *inside* the loop. Evaluate the value it
// contains when the loop exits, if possible.
const SCEV *ExitValue = SE->getSCEVAtScope(Inst, L->getParentLoop());
- if (!SE->isLoopInvariant(ExitValue, L))
+ if (!SE->isLoopInvariant(ExitValue, L) ||
+ !isSafeToExpand(ExitValue, *SE))
continue;
+ // Computing the value outside of the loop brings no benefit if :
+ // - it is definitely used inside the loop in a way which can not be
+ // optimized away.
+ // - no use outside of the loop can take advantage of hoisting the
+ // computation out of the loop
+ if (ExitValue->getSCEVType()>=scMulExpr) {
+ unsigned NumHardInternalUses = 0;
+ unsigned NumSoftExternalUses = 0;
+ unsigned NumUses = 0;
+ for (Value::use_iterator IB=Inst->use_begin(), IE=Inst->use_end();
+ IB!=IE && NumUses<=6 ; ++IB) {
+ Instruction *UseInstr = cast<Instruction>(*IB);
+ unsigned Opc = UseInstr->getOpcode();
+ NumUses++;
+ if (L->contains(UseInstr)) {
+ if (Opc == Instruction::Call || Opc == Instruction::Ret)
+ NumHardInternalUses++;
+ } else {
+ if (Opc == Instruction::PHI) {
+ // Do not count the Phi as a use. LCSSA may have inserted
+ // plenty of trivial ones.
+ NumUses--;
+ for (Value::use_iterator PB=UseInstr->use_begin(),
+ PE=UseInstr->use_end();
+ PB!=PE && NumUses<=6 ; ++PB, ++NumUses) {
+ unsigned PhiOpc = cast<Instruction>(*PB)->getOpcode();
+ if (PhiOpc != Instruction::Call && PhiOpc != Instruction::Ret)
+ NumSoftExternalUses++;
+ }
+ continue;
+ }
+ if (Opc != Instruction::Call && Opc != Instruction::Ret)
+ NumSoftExternalUses++;
+ }
+ }
+ if (NumUses <= 6 && NumHardInternalUses && !NumSoftExternalUses)
+ continue;
+ }
+
Value *ExitVal = Rewriter.expandCodeFor(ExitValue, PN->getType(), Inst);
DEBUG(dbgs() << "INDVARS: RLEV: AfterLoopVal = " << *ExitVal << '\n'
PN->setIncomingValue(i, ExitVal);
- // If this instruction is dead now, delete it.
- RecursivelyDeleteTriviallyDeadInstructions(Inst);
+ // If this instruction is dead now, delete it. Don't do it now to avoid
+ // invalidating iterators.
+ if (isInstructionTriviallyDead(Inst, TLI))
+ DeadInsts.push_back(Inst);
if (NumPreds == 1) {
// Completely replace a single-pred PHI. This is safe, because the
// NewVal won't be variant in the loop, so we don't need an LCSSA phi
// node anymore.
PN->replaceAllUsesWith(ExitVal);
- RecursivelyDeleteTriviallyDeadInstructions(PN);
+ PN->eraseFromParent();
}
}
if (NumPreds != 1) {
Rewriter.clearInsertPoint();
}
-void IndVarSimplify::RewriteNonIntegerIVs(Loop *L) {
- // First step. Check to see if there are any floating-point recurrences.
- // If there are, change them into integer recurrences, permitting analysis by
- // the SCEV routines.
- //
- BasicBlock *Header = L->getHeader();
-
- SmallVector<WeakVH, 8> PHIs;
- for (BasicBlock::iterator I = Header->begin();
- PHINode *PN = dyn_cast<PHINode>(I); ++I)
- PHIs.push_back(PN);
-
- for (unsigned i = 0, e = PHIs.size(); i != e; ++i)
- if (PHINode *PN = dyn_cast_or_null<PHINode>(&*PHIs[i]))
- HandleFloatingPointIV(L, PN);
-
- // If the loop previously had floating-point IV, ScalarEvolution
- // may not have been able to compute a trip count. Now that we've done some
- // re-writing, the trip count may be computable.
- if (Changed)
- SE->forgetLoop(L);
-}
-
-/// SimplifyIVUsers - Iteratively perform simplification on IVUsers within this
-/// loop. IVUsers is treated as a worklist. Each successive simplification may
-/// push more users which may themselves be candidates for simplification.
-///
-/// This is the old approach to IV simplification to be replaced by
-/// SimplifyIVUsersNoRewrite.
-///
-void IndVarSimplify::SimplifyIVUsers(SCEVExpander &Rewriter) {
- // Each round of simplification involves a round of eliminating operations
- // followed by a round of widening IVs. A single IVUsers worklist is used
- // across all rounds. The inner loop advances the user. If widening exposes
- // more uses, then another pass through the outer loop is triggered.
- for (IVUsers::iterator I = IU->begin(); I != IU->end(); ++I) {
- Instruction *UseInst = I->getUser();
- Value *IVOperand = I->getOperandValToReplace();
-
- if (ICmpInst *ICmp = dyn_cast<ICmpInst>(UseInst)) {
- EliminateIVComparison(ICmp, IVOperand);
- continue;
- }
- if (BinaryOperator *Rem = dyn_cast<BinaryOperator>(UseInst)) {
- bool IsSigned = Rem->getOpcode() == Instruction::SRem;
- if (IsSigned || Rem->getOpcode() == Instruction::URem) {
- EliminateIVRemainder(Rem, IVOperand, IsSigned);
- continue;
- }
- }
- }
-}
+//===----------------------------------------------------------------------===//
+// IV Widening - Extend the width of an IV to cover its widest uses.
+//===----------------------------------------------------------------------===//
namespace {
// Collect information about induction variables that are used by sign/zero
// extend operations. This information is recorded by CollectExtend and
// provides the input to WidenIV.
struct WideIVInfo {
- const Type *WidestNativeType; // Widest integer type created [sz]ext
- bool IsSigned; // Was an sext user seen before a zext?
+ PHINode *NarrowIV;
+ Type *WidestNativeType; // Widest integer type created [sz]ext
+ bool IsSigned; // Was an sext user seen before a zext?
+
+ WideIVInfo() : NarrowIV(0), WidestNativeType(0), IsSigned(false) {}
+ };
+
+ class WideIVVisitor : public IVVisitor {
+ ScalarEvolution *SE;
+ const DataLayout *TD;
+
+ public:
+ WideIVInfo WI;
- WideIVInfo() : WidestNativeType(0), IsSigned(false) {}
+ WideIVVisitor(PHINode *NarrowIV, ScalarEvolution *SCEV,
+ const DataLayout *TData) :
+ SE(SCEV), TD(TData) { WI.NarrowIV = NarrowIV; }
+
+ // Implement the interface used by simplifyUsersOfIV.
+ virtual void visitCast(CastInst *Cast);
};
}
-/// CollectExtend - Update information about the induction variable that is
+/// visitCast - Update information about the induction variable that is
/// extended by this sign or zero extend operation. This is used to determine
/// the final width of the IV before actually widening it.
-static void CollectExtend(CastInst *Cast, bool IsSigned, WideIVInfo &WI,
- ScalarEvolution *SE, const TargetData *TD) {
- const Type *Ty = Cast->getType();
+void WideIVVisitor::visitCast(CastInst *Cast) {
+ bool IsSigned = Cast->getOpcode() == Instruction::SExt;
+ if (!IsSigned && Cast->getOpcode() != Instruction::ZExt)
+ return;
+
+ Type *Ty = Cast->getType();
uint64_t Width = SE->getTypeSizeInBits(Ty);
if (TD && !TD->isLegalInteger(Width))
return;
}
namespace {
+
+/// NarrowIVDefUse - Record a link in the Narrow IV def-use chain along with the
+/// WideIV that computes the same value as the Narrow IV def. This avoids
+/// caching Use* pointers.
+struct NarrowIVDefUse {
+ Instruction *NarrowDef;
+ Instruction *NarrowUse;
+ Instruction *WideDef;
+
+ NarrowIVDefUse(): NarrowDef(0), NarrowUse(0), WideDef(0) {}
+
+ NarrowIVDefUse(Instruction *ND, Instruction *NU, Instruction *WD):
+ NarrowDef(ND), NarrowUse(NU), WideDef(WD) {}
+};
+
/// WidenIV - The goal of this transform is to remove sign and zero extends
/// without creating any new induction variables. To do this, it creates a new
/// phi of the wider type and redirects all users, either removing extends or
class WidenIV {
// Parameters
PHINode *OrigPhi;
- const Type *WideType;
+ Type *WideType;
bool IsSigned;
// Context
SmallVectorImpl<WeakVH> &DeadInsts;
SmallPtrSet<Instruction*,16> Widened;
+ SmallVector<NarrowIVDefUse, 8> NarrowIVUsers;
public:
- WidenIV(PHINode *PN, const WideIVInfo &WI, LoopInfo *LInfo,
+ WidenIV(const WideIVInfo &WI, LoopInfo *LInfo,
ScalarEvolution *SEv, DominatorTree *DTree,
SmallVectorImpl<WeakVH> &DI) :
- OrigPhi(PN),
+ OrigPhi(WI.NarrowIV),
WideType(WI.WidestNativeType),
IsSigned(WI.IsSigned),
LI(LInfo),
PHINode *CreateWideIV(SCEVExpander &Rewriter);
protected:
- Instruction *CloneIVUser(Instruction *NarrowUse,
- Instruction *NarrowDef,
- Instruction *WideDef);
+ Value *getExtend(Value *NarrowOper, Type *WideType, bool IsSigned,
+ Instruction *Use);
+
+ Instruction *CloneIVUser(NarrowIVDefUse DU);
const SCEVAddRecExpr *GetWideRecurrence(Instruction *NarrowUse);
- Instruction *WidenIVUse(Use &NarrowDefUse, Instruction *NarrowDef,
- Instruction *WideDef);
+ const SCEVAddRecExpr* GetExtendedOperandRecurrence(NarrowIVDefUse DU);
+
+ Instruction *WidenIVUse(NarrowIVDefUse DU, SCEVExpander &Rewriter);
+
+ void pushNarrowIVUsers(Instruction *NarrowDef, Instruction *WideDef);
};
} // anonymous namespace
-static Value *getExtend( Value *NarrowOper, const Type *WideType,
- bool IsSigned, IRBuilder<> &Builder) {
+/// isLoopInvariant - Perform a quick domtree based check for loop invariance
+/// assuming that V is used within the loop. LoopInfo::isLoopInvariant() seems
+/// gratuitous for this purpose.
+static bool isLoopInvariant(Value *V, const Loop *L, const DominatorTree *DT) {
+ Instruction *Inst = dyn_cast<Instruction>(V);
+ if (!Inst)
+ return true;
+
+ return DT->properlyDominates(Inst->getParent(), L->getHeader());
+}
+
+Value *WidenIV::getExtend(Value *NarrowOper, Type *WideType, bool IsSigned,
+ Instruction *Use) {
+ // Set the debug location and conservative insertion point.
+ IRBuilder<> Builder(Use);
+ // Hoist the insertion point into loop preheaders as far as possible.
+ for (const Loop *L = LI->getLoopFor(Use->getParent());
+ L && L->getLoopPreheader() && isLoopInvariant(NarrowOper, L, DT);
+ L = L->getParentLoop())
+ Builder.SetInsertPoint(L->getLoopPreheader()->getTerminator());
+
return IsSigned ? Builder.CreateSExt(NarrowOper, WideType) :
Builder.CreateZExt(NarrowOper, WideType);
}
/// CloneIVUser - Instantiate a wide operation to replace a narrow
/// operation. This only needs to handle operations that can evaluation to
/// SCEVAddRec. It can safely return 0 for any operation we decide not to clone.
-Instruction *WidenIV::CloneIVUser(Instruction *NarrowUse,
- Instruction *NarrowDef,
- Instruction *WideDef) {
- unsigned Opcode = NarrowUse->getOpcode();
+Instruction *WidenIV::CloneIVUser(NarrowIVDefUse DU) {
+ unsigned Opcode = DU.NarrowUse->getOpcode();
switch (Opcode) {
default:
return 0;
case Instruction::Shl:
case Instruction::LShr:
case Instruction::AShr:
- DEBUG(dbgs() << "Cloning IVUser: " << *NarrowUse << "\n");
-
- IRBuilder<> Builder(NarrowUse);
+ DEBUG(dbgs() << "Cloning IVUser: " << *DU.NarrowUse << "\n");
// Replace NarrowDef operands with WideDef. Otherwise, we don't know
// anything about the narrow operand yet so must insert a [sz]ext. It is
// probably loop invariant and will be folded or hoisted. If it actually
// comes from a widened IV, it should be removed during a future call to
// WidenIVUse.
- Value *LHS = (NarrowUse->getOperand(0) == NarrowDef) ? WideDef :
- getExtend(NarrowUse->getOperand(0), WideType, IsSigned, Builder);
- Value *RHS = (NarrowUse->getOperand(1) == NarrowDef) ? WideDef :
- getExtend(NarrowUse->getOperand(1), WideType, IsSigned, Builder);
+ Value *LHS = (DU.NarrowUse->getOperand(0) == DU.NarrowDef) ? DU.WideDef :
+ getExtend(DU.NarrowUse->getOperand(0), WideType, IsSigned, DU.NarrowUse);
+ Value *RHS = (DU.NarrowUse->getOperand(1) == DU.NarrowDef) ? DU.WideDef :
+ getExtend(DU.NarrowUse->getOperand(1), WideType, IsSigned, DU.NarrowUse);
- BinaryOperator *NarrowBO = cast<BinaryOperator>(NarrowUse);
+ BinaryOperator *NarrowBO = cast<BinaryOperator>(DU.NarrowUse);
BinaryOperator *WideBO = BinaryOperator::Create(NarrowBO->getOpcode(),
LHS, RHS,
NarrowBO->getName());
+ IRBuilder<> Builder(DU.NarrowUse);
Builder.Insert(WideBO);
- if (NarrowBO->hasNoUnsignedWrap()) WideBO->setHasNoUnsignedWrap();
- if (NarrowBO->hasNoSignedWrap()) WideBO->setHasNoSignedWrap();
-
+ if (const OverflowingBinaryOperator *OBO =
+ dyn_cast<OverflowingBinaryOperator>(NarrowBO)) {
+ if (OBO->hasNoUnsignedWrap()) WideBO->setHasNoUnsignedWrap();
+ if (OBO->hasNoSignedWrap()) WideBO->setHasNoSignedWrap();
+ }
return WideBO;
}
- llvm_unreachable(0);
}
-// GetWideRecurrence - Is this instruction potentially interesting from IVUsers'
-// perspective after widening it's type? In other words, can the extend be
-// safely hoisted out of the loop with SCEV reducing the value to a recurrence
-// on the same loop. If so, return the sign or zero extended
-// recurrence. Otherwise return NULL.
+/// No-wrap operations can transfer sign extension of their result to their
+/// operands. Generate the SCEV value for the widened operation without
+/// actually modifying the IR yet. If the expression after extending the
+/// operands is an AddRec for this loop, return it.
+const SCEVAddRecExpr* WidenIV::GetExtendedOperandRecurrence(NarrowIVDefUse DU) {
+ // Handle the common case of add<nsw/nuw>
+ if (DU.NarrowUse->getOpcode() != Instruction::Add)
+ return 0;
+
+ // One operand (NarrowDef) has already been extended to WideDef. Now determine
+ // if extending the other will lead to a recurrence.
+ unsigned ExtendOperIdx = DU.NarrowUse->getOperand(0) == DU.NarrowDef ? 1 : 0;
+ assert(DU.NarrowUse->getOperand(1-ExtendOperIdx) == DU.NarrowDef && "bad DU");
+
+ const SCEV *ExtendOperExpr = 0;
+ const OverflowingBinaryOperator *OBO =
+ cast<OverflowingBinaryOperator>(DU.NarrowUse);
+ if (IsSigned && OBO->hasNoSignedWrap())
+ ExtendOperExpr = SE->getSignExtendExpr(
+ SE->getSCEV(DU.NarrowUse->getOperand(ExtendOperIdx)), WideType);
+ else if(!IsSigned && OBO->hasNoUnsignedWrap())
+ ExtendOperExpr = SE->getZeroExtendExpr(
+ SE->getSCEV(DU.NarrowUse->getOperand(ExtendOperIdx)), WideType);
+ else
+ return 0;
+
+ // When creating this AddExpr, don't apply the current operations NSW or NUW
+ // flags. This instruction may be guarded by control flow that the no-wrap
+ // behavior depends on. Non-control-equivalent instructions can be mapped to
+ // the same SCEV expression, and it would be incorrect to transfer NSW/NUW
+ // semantics to those operations.
+ const SCEVAddRecExpr *AddRec = dyn_cast<SCEVAddRecExpr>(
+ SE->getAddExpr(SE->getSCEV(DU.WideDef), ExtendOperExpr));
+
+ if (!AddRec || AddRec->getLoop() != L)
+ return 0;
+ return AddRec;
+}
+
+/// GetWideRecurrence - Is this instruction potentially interesting from
+/// IVUsers' perspective after widening it's type? In other words, can the
+/// extend be safely hoisted out of the loop with SCEV reducing the value to a
+/// recurrence on the same loop. If so, return the sign or zero extended
+/// recurrence. Otherwise return NULL.
const SCEVAddRecExpr *WidenIV::GetWideRecurrence(Instruction *NarrowUse) {
if (!SE->isSCEVable(NarrowUse->getType()))
return 0;
const SCEV *NarrowExpr = SE->getSCEV(NarrowUse);
+ if (SE->getTypeSizeInBits(NarrowExpr->getType())
+ >= SE->getTypeSizeInBits(WideType)) {
+ // NarrowUse implicitly widens its operand. e.g. a gep with a narrow
+ // index. So don't follow this use.
+ return 0;
+ }
+
const SCEV *WideExpr = IsSigned ?
SE->getSignExtendExpr(NarrowExpr, WideType) :
SE->getZeroExtendExpr(NarrowExpr, WideType);
const SCEVAddRecExpr *AddRec = dyn_cast<SCEVAddRecExpr>(WideExpr);
if (!AddRec || AddRec->getLoop() != L)
return 0;
-
return AddRec;
}
-/// HoistStep - Attempt to hoist an IV increment above a potential use.
-///
-/// To successfully hoist, two criteria must be met:
-/// - IncV operands dominate InsertPos and
-/// - InsertPos dominates IncV
-///
-/// Meeting the second condition means that we don't need to check all of IncV's
-/// existing uses (it's moving up in the domtree).
-///
-/// This does not yet recursively hoist the operands, although that would
-/// not be difficult.
-static bool HoistStep(Instruction *IncV, Instruction *InsertPos,
- const DominatorTree *DT)
-{
- if (DT->dominates(IncV, InsertPos))
- return true;
-
- if (!DT->dominates(InsertPos->getParent(), IncV->getParent()))
- return false;
-
- if (IncV->mayHaveSideEffects())
- return false;
-
- // Attempt to hoist IncV
- for (User::op_iterator OI = IncV->op_begin(), OE = IncV->op_end();
- OI != OE; ++OI) {
- Instruction *OInst = dyn_cast<Instruction>(OI);
- if (OInst && !DT->dominates(OInst, InsertPos))
- return false;
- }
- IncV->moveBefore(InsertPos);
- return true;
-}
-
/// WidenIVUse - Determine whether an individual user of the narrow IV can be
/// widened. If so, return the wide clone of the user.
-Instruction *WidenIV::WidenIVUse(Use &NarrowDefUse, Instruction *NarrowDef,
- Instruction *WideDef) {
- Instruction *NarrowUse = cast<Instruction>(NarrowDefUse.getUser());
+Instruction *WidenIV::WidenIVUse(NarrowIVDefUse DU, SCEVExpander &Rewriter) {
- // To be consistent with IVUsers, stop traversing the def-use chain at
- // inner-loop phis or post-loop phis.
- if (isa<PHINode>(NarrowUse) && LI->getLoopFor(NarrowUse->getParent()) != L)
- return 0;
-
- // Handle data flow merges and bizarre phi cycles.
- if (!Widened.insert(NarrowUse))
+ // Stop traversing the def-use chain at inner-loop phis or post-loop phis.
+ if (isa<PHINode>(DU.NarrowUse) &&
+ LI->getLoopFor(DU.NarrowUse->getParent()) != L)
return 0;
// Our raison d'etre! Eliminate sign and zero extension.
- if (IsSigned ? isa<SExtInst>(NarrowUse) : isa<ZExtInst>(NarrowUse)) {
- Value *NewDef = WideDef;
- if (NarrowUse->getType() != WideType) {
- unsigned CastWidth = SE->getTypeSizeInBits(NarrowUse->getType());
+ if (IsSigned ? isa<SExtInst>(DU.NarrowUse) : isa<ZExtInst>(DU.NarrowUse)) {
+ Value *NewDef = DU.WideDef;
+ if (DU.NarrowUse->getType() != WideType) {
+ unsigned CastWidth = SE->getTypeSizeInBits(DU.NarrowUse->getType());
unsigned IVWidth = SE->getTypeSizeInBits(WideType);
if (CastWidth < IVWidth) {
// The cast isn't as wide as the IV, so insert a Trunc.
- IRBuilder<> Builder(NarrowDefUse);
- NewDef = Builder.CreateTrunc(WideDef, NarrowUse->getType());
+ IRBuilder<> Builder(DU.NarrowUse);
+ NewDef = Builder.CreateTrunc(DU.WideDef, DU.NarrowUse->getType());
}
else {
// A wider extend was hidden behind a narrower one. This may induce
// another round of IV widening in which the intermediate IV becomes
// dead. It should be very rare.
DEBUG(dbgs() << "INDVARS: New IV " << *WidePhi
- << " not wide enough to subsume " << *NarrowUse << "\n");
- NarrowUse->replaceUsesOfWith(NarrowDef, WideDef);
- NewDef = NarrowUse;
+ << " not wide enough to subsume " << *DU.NarrowUse << "\n");
+ DU.NarrowUse->replaceUsesOfWith(DU.NarrowDef, DU.WideDef);
+ NewDef = DU.NarrowUse;
}
}
- if (NewDef != NarrowUse) {
- DEBUG(dbgs() << "INDVARS: eliminating " << *NarrowUse
- << " replaced by " << *WideDef << "\n");
+ if (NewDef != DU.NarrowUse) {
+ DEBUG(dbgs() << "INDVARS: eliminating " << *DU.NarrowUse
+ << " replaced by " << *DU.WideDef << "\n");
++NumElimExt;
- NarrowUse->replaceAllUsesWith(NewDef);
- DeadInsts.push_back(NarrowUse);
+ DU.NarrowUse->replaceAllUsesWith(NewDef);
+ DeadInsts.push_back(DU.NarrowUse);
}
// Now that the extend is gone, we want to expose it's uses for potential
// further simplification. We don't need to directly inform SimplifyIVUsers
// No further widening is needed. The deceased [sz]ext had done it for us.
return 0;
}
- const SCEVAddRecExpr *WideAddRec = GetWideRecurrence(NarrowUse);
+
+ // Does this user itself evaluate to a recurrence after widening?
+ const SCEVAddRecExpr *WideAddRec = GetWideRecurrence(DU.NarrowUse);
+ if (!WideAddRec) {
+ WideAddRec = GetExtendedOperandRecurrence(DU);
+ }
if (!WideAddRec) {
// This user does not evaluate to a recurence after widening, so don't
// follow it. Instead insert a Trunc to kill off the original use,
// eventually isolating the original narrow IV so it can be removed.
- IRBuilder<> Builder(NarrowDefUse);
- Value *Trunc = Builder.CreateTrunc(WideDef, NarrowDef->getType());
- NarrowUse->replaceUsesOfWith(NarrowDef, Trunc);
+ IRBuilder<> Builder(getInsertPointForUses(DU.NarrowUse, DU.NarrowDef, DT));
+ Value *Trunc = Builder.CreateTrunc(DU.WideDef, DU.NarrowDef->getType());
+ DU.NarrowUse->replaceUsesOfWith(DU.NarrowDef, Trunc);
return 0;
}
- // We assume that block terminators are not SCEVable.
- assert(NarrowUse != NarrowUse->getParent()->getTerminator() &&
- "can't split terminators");
+ // Assume block terminators cannot evaluate to a recurrence. We can't to
+ // insert a Trunc after a terminator if there happens to be a critical edge.
+ assert(DU.NarrowUse != DU.NarrowUse->getParent()->getTerminator() &&
+ "SCEV is not expected to evaluate a block terminator");
// Reuse the IV increment that SCEVExpander created as long as it dominates
// NarrowUse.
Instruction *WideUse = 0;
- if (WideAddRec == WideIncExpr && HoistStep(WideInc, NarrowUse, DT)) {
+ if (WideAddRec == WideIncExpr
+ && Rewriter.hoistIVInc(WideInc, DU.NarrowUse))
WideUse = WideInc;
- }
else {
- WideUse = CloneIVUser(NarrowUse, NarrowDef, WideDef);
+ WideUse = CloneIVUser(DU);
if (!WideUse)
return 0;
}
- // GetWideRecurrence ensured that the narrow expression could be extended
- // outside the loop without overflow. This suggests that the wide use
+ // Evaluation of WideAddRec ensured that the narrow expression could be
+ // extended outside the loop without overflow. This suggests that the wide use
// evaluates to the same expression as the extended narrow use, but doesn't
// absolutely guarantee it. Hence the following failsafe check. In rare cases
// where it fails, we simply throw away the newly created wide use.
return WideUse;
}
+/// pushNarrowIVUsers - Add eligible users of NarrowDef to NarrowIVUsers.
+///
+void WidenIV::pushNarrowIVUsers(Instruction *NarrowDef, Instruction *WideDef) {
+ for (Value::use_iterator UI = NarrowDef->use_begin(),
+ UE = NarrowDef->use_end(); UI != UE; ++UI) {
+ Instruction *NarrowUse = cast<Instruction>(*UI);
+
+ // Handle data flow merges and bizarre phi cycles.
+ if (!Widened.insert(NarrowUse))
+ continue;
+
+ NarrowIVUsers.push_back(NarrowIVDefUse(NarrowDef, NarrowUse, WideDef));
+ }
+}
+
/// CreateWideIV - Process a single induction variable. First use the
/// SCEVExpander to create a wide induction variable that evaluates to the same
/// recurrence as the original narrow IV. Then use a worklist to forward
++NumWidened;
// Traverse the def-use chain using a worklist starting at the original IV.
- assert(Widened.empty() && "expect initial state" );
+ assert(Widened.empty() && NarrowIVUsers.empty() && "expect initial state" );
+
+ Widened.insert(OrigPhi);
+ pushNarrowIVUsers(OrigPhi, WidePhi);
- // Each worklist entry has a Narrow def-use link and Wide def.
- SmallVector<std::pair<Use *, Instruction *>, 8> NarrowIVUsers;
- for (Value::use_iterator UI = OrigPhi->use_begin(),
- UE = OrigPhi->use_end(); UI != UE; ++UI) {
- NarrowIVUsers.push_back(std::make_pair(&UI.getUse(), WidePhi));
- }
while (!NarrowIVUsers.empty()) {
- Use *UsePtr;
- Instruction *WideDef;
- tie(UsePtr, WideDef) = NarrowIVUsers.pop_back_val();
- Use &NarrowDefUse = *UsePtr;
+ NarrowIVDefUse DU = NarrowIVUsers.pop_back_val();
// Process a def-use edge. This may replace the use, so don't hold a
// use_iterator across it.
- Instruction *NarrowDef = cast<Instruction>(NarrowDefUse.get());
- Instruction *WideUse = WidenIVUse(NarrowDefUse, NarrowDef, WideDef);
+ Instruction *WideUse = WidenIVUse(DU, Rewriter);
// Follow all def-use edges from the previous narrow use.
- if (WideUse) {
- for (Value::use_iterator UI = NarrowDefUse.getUser()->use_begin(),
- UE = NarrowDefUse.getUser()->use_end(); UI != UE; ++UI) {
- NarrowIVUsers.push_back(std::make_pair(&UI.getUse(), WideUse));
- }
- }
+ if (WideUse)
+ pushNarrowIVUsers(DU.NarrowUse, WideUse);
+
// WidenIVUse may have removed the def-use edge.
- if (NarrowDef->use_empty())
- DeadInsts.push_back(NarrowDef);
+ if (DU.NarrowDef->use_empty())
+ DeadInsts.push_back(DU.NarrowDef);
}
return WidePhi;
}
-void IndVarSimplify::EliminateIVComparison(ICmpInst *ICmp, Value *IVOperand) {
- unsigned IVOperIdx = 0;
- ICmpInst::Predicate Pred = ICmp->getPredicate();
- if (IVOperand != ICmp->getOperand(0)) {
- // Swapped
- assert(IVOperand == ICmp->getOperand(1) && "Can't find IVOperand");
- IVOperIdx = 1;
- Pred = ICmpInst::getSwappedPredicate(Pred);
- }
-
- // Get the SCEVs for the ICmp operands.
- const SCEV *S = SE->getSCEV(ICmp->getOperand(IVOperIdx));
- const SCEV *X = SE->getSCEV(ICmp->getOperand(1 - IVOperIdx));
-
- // Simplify unnecessary loops away.
- const Loop *ICmpLoop = LI->getLoopFor(ICmp->getParent());
- S = SE->getSCEVAtScope(S, ICmpLoop);
- X = SE->getSCEVAtScope(X, ICmpLoop);
-
- // If the condition is always true or always false, replace it with
- // a constant value.
- if (SE->isKnownPredicate(Pred, S, X))
- ICmp->replaceAllUsesWith(ConstantInt::getTrue(ICmp->getContext()));
- else if (SE->isKnownPredicate(ICmpInst::getInversePredicate(Pred), S, X))
- ICmp->replaceAllUsesWith(ConstantInt::getFalse(ICmp->getContext()));
- else
- return;
-
- DEBUG(dbgs() << "INDVARS: Eliminated comparison: " << *ICmp << '\n');
- ++NumElimCmp;
- Changed = true;
- DeadInsts.push_back(ICmp);
-}
-
-void IndVarSimplify::EliminateIVRemainder(BinaryOperator *Rem,
- Value *IVOperand,
- bool IsSigned) {
- // We're only interested in the case where we know something about
- // the numerator.
- if (IVOperand != Rem->getOperand(0))
- return;
+//===----------------------------------------------------------------------===//
+// Simplification of IV users based on SCEV evaluation.
+//===----------------------------------------------------------------------===//
- // Get the SCEVs for the ICmp operands.
- const SCEV *S = SE->getSCEV(Rem->getOperand(0));
- const SCEV *X = SE->getSCEV(Rem->getOperand(1));
- // Simplify unnecessary loops away.
- const Loop *ICmpLoop = LI->getLoopFor(Rem->getParent());
- S = SE->getSCEVAtScope(S, ICmpLoop);
- X = SE->getSCEVAtScope(X, ICmpLoop);
-
- // i % n --> i if i is in [0,n).
- if ((!IsSigned || SE->isKnownNonNegative(S)) &&
- SE->isKnownPredicate(IsSigned ? ICmpInst::ICMP_SLT : ICmpInst::ICMP_ULT,
- S, X))
- Rem->replaceAllUsesWith(Rem->getOperand(0));
- else {
- // (i+1) % n --> (i+1)==n?0:(i+1) if i is in [0,n).
- const SCEV *LessOne =
- SE->getMinusSCEV(S, SE->getConstant(S->getType(), 1));
- if (IsSigned && !SE->isKnownNonNegative(LessOne))
- return;
-
- if (!SE->isKnownPredicate(IsSigned ?
- ICmpInst::ICMP_SLT : ICmpInst::ICMP_ULT,
- LessOne, X))
- return;
-
- ICmpInst *ICmp = new ICmpInst(Rem, ICmpInst::ICMP_EQ,
- Rem->getOperand(0), Rem->getOperand(1),
- "tmp");
- SelectInst *Sel =
- SelectInst::Create(ICmp,
- ConstantInt::get(Rem->getType(), 0),
- Rem->getOperand(0), "tmp", Rem);
- Rem->replaceAllUsesWith(Sel);
- }
-
- // Inform IVUsers about the new users.
- if (IU) {
- if (Instruction *I = dyn_cast<Instruction>(Rem->getOperand(0)))
- IU->AddUsersIfInteresting(I);
- }
- DEBUG(dbgs() << "INDVARS: Simplified rem: " << *Rem << '\n');
- ++NumElimRem;
- Changed = true;
- DeadInsts.push_back(Rem);
-}
-
-/// EliminateIVUser - Eliminate an operation that consumes a simple IV and has
-/// no observable side-effect given the range of IV values.
-bool IndVarSimplify::EliminateIVUser(Instruction *UseInst,
- Instruction *IVOperand) {
- if (ICmpInst *ICmp = dyn_cast<ICmpInst>(UseInst)) {
- EliminateIVComparison(ICmp, IVOperand);
- return true;
- }
- if (BinaryOperator *Rem = dyn_cast<BinaryOperator>(UseInst)) {
- bool IsSigned = Rem->getOpcode() == Instruction::SRem;
- if (IsSigned || Rem->getOpcode() == Instruction::URem) {
- EliminateIVRemainder(Rem, IVOperand, IsSigned);
- return true;
- }
- }
-
- // Eliminate any operation that SCEV can prove is an identity function.
- if (!SE->isSCEVable(UseInst->getType()) ||
- (UseInst->getType() != IVOperand->getType()) ||
- (SE->getSCEV(UseInst) != SE->getSCEV(IVOperand)))
- return false;
-
- DEBUG(dbgs() << "INDVARS: Eliminated identity: " << *UseInst << '\n');
-
- UseInst->replaceAllUsesWith(IVOperand);
- ++NumElimIdentity;
- Changed = true;
- DeadInsts.push_back(UseInst);
- return true;
-}
-
-/// pushIVUsers - Add all uses of Def to the current IV's worklist.
-///
-static void pushIVUsers(
- Instruction *Def,
- SmallPtrSet<Instruction*,16> &Simplified,
- SmallVectorImpl< std::pair<Instruction*,Instruction*> > &SimpleIVUsers) {
-
- for (Value::use_iterator UI = Def->use_begin(), E = Def->use_end();
- UI != E; ++UI) {
- Instruction *User = cast<Instruction>(*UI);
-
- // Avoid infinite or exponential worklist processing.
- // Also ensure unique worklist users.
- // If Def is a LoopPhi, it may not be in the Simplified set, so check for
- // self edges first.
- if (User != Def && Simplified.insert(User))
- SimpleIVUsers.push_back(std::make_pair(User, Def));
- }
-}
-
-/// isSimpleIVUser - Return true if this instruction generates a simple SCEV
-/// expression in terms of that IV.
-///
-/// This is similar to IVUsers' isInsteresting() but processes each instruction
-/// non-recursively when the operand is already known to be a simpleIVUser.
-///
-bool IndVarSimplify::isSimpleIVUser(Instruction *I, const Loop *L) {
- if (!SE->isSCEVable(I->getType()))
- return false;
-
- // Get the symbolic expression for this instruction.
- const SCEV *S = SE->getSCEV(I);
-
- // We assume that terminators are not SCEVable.
- assert((!S || I != I->getParent()->getTerminator()) &&
- "can't fold terminators");
-
- // Only consider affine recurrences.
- const SCEVAddRecExpr *AR = dyn_cast<SCEVAddRecExpr>(S);
- if (AR && AR->getLoop() == L)
- return true;
-
- return false;
-}
-
-/// SimplifyIVUsersNoRewrite - Iteratively perform simplification on a worklist
-/// of IV users. Each successive simplification may push more users which may
-/// themselves be candidates for simplification.
-///
-/// The "NoRewrite" algorithm does not require IVUsers analysis. Instead, it
-/// simplifies instructions in-place during analysis. Rather than rewriting
-/// induction variables bottom-up from their users, it transforms a chain of
-/// IVUsers top-down, updating the IR only when it encouters a clear
-/// optimization opportunitiy. A SCEVExpander "Rewriter" instance is still
-/// needed, but only used to generate a new IV (phi) of wider type for sign/zero
-/// extend elimination.
-///
-/// Once DisableIVRewrite is default, LSR will be the only client of IVUsers.
-///
-void IndVarSimplify::SimplifyIVUsersNoRewrite(Loop *L, SCEVExpander &Rewriter) {
- std::map<PHINode *, WideIVInfo> WideIVMap;
+/// SimplifyAndExtend - Iteratively perform simplification on a worklist of IV
+/// users. Each successive simplification may push more users which may
+/// themselves be candidates for simplification.
+///
+/// Sign/Zero extend elimination is interleaved with IV simplification.
+///
+void IndVarSimplify::SimplifyAndExtend(Loop *L,
+ SCEVExpander &Rewriter,
+ LPPassManager &LPM) {
+ SmallVector<WideIVInfo, 8> WideIVs;
SmallVector<PHINode*, 8> LoopPhis;
for (BasicBlock::iterator I = L->getHeader()->begin(); isa<PHINode>(I); ++I) {
// extension. The first time SCEV attempts to normalize sign/zero extension,
// the result becomes final. So for the most predictable results, we delay
// evaluation of sign/zero extend evaluation until needed, and avoid running
- // other SCEV based analysis prior to SimplifyIVUsersNoRewrite.
+ // other SCEV based analysis prior to SimplifyAndExtend.
do {
PHINode *CurrIV = LoopPhis.pop_back_val();
// Information about sign/zero extensions of CurrIV.
- WideIVInfo WI;
-
- // Instructions processed by SimplifyIVUsers for CurrIV.
- SmallPtrSet<Instruction*,16> Simplified;
-
- // Use-def pairs if IVUsers waiting to be processed for CurrIV.
- SmallVector<std::pair<Instruction*, Instruction*>, 8> SimpleIVUsers;
-
- // Push users of the current LoopPhi. In rare cases, pushIVUsers may be
- // called multiple times for the same LoopPhi. This is the proper thing to
- // do for loop header phis that use each other.
- pushIVUsers(CurrIV, Simplified, SimpleIVUsers);
+ WideIVVisitor WIV(CurrIV, SE, TD);
- while (!SimpleIVUsers.empty()) {
- Instruction *UseInst, *Operand;
- tie(UseInst, Operand) = SimpleIVUsers.pop_back_val();
+ Changed |= simplifyUsersOfIV(CurrIV, SE, &LPM, DeadInsts, &WIV);
- if (EliminateIVUser(UseInst, Operand)) {
- pushIVUsers(Operand, Simplified, SimpleIVUsers);
- continue;
- }
- if (CastInst *Cast = dyn_cast<CastInst>(UseInst)) {
- bool IsSigned = Cast->getOpcode() == Instruction::SExt;
- if (IsSigned || Cast->getOpcode() == Instruction::ZExt) {
- CollectExtend(Cast, IsSigned, WI, SE, TD);
- }
- continue;
- }
- if (isSimpleIVUser(UseInst, L)) {
- pushIVUsers(UseInst, Simplified, SimpleIVUsers);
- }
- }
- if (WI.WidestNativeType) {
- WideIVMap[CurrIV] = WI;
+ if (WIV.WI.WidestNativeType) {
+ WideIVs.push_back(WIV.WI);
}
} while(!LoopPhis.empty());
- for (std::map<PHINode *, WideIVInfo>::const_iterator I = WideIVMap.begin(),
- E = WideIVMap.end(); I != E; ++I) {
- WidenIV Widener(I->first, I->second, LI, SE, DT, DeadInsts);
+ for (; !WideIVs.empty(); WideIVs.pop_back()) {
+ WidenIV Widener(WideIVs.back(), LI, SE, DT, DeadInsts);
if (PHINode *WidePhi = Widener.CreateWideIV(Rewriter)) {
Changed = true;
LoopPhis.push_back(WidePhi);
}
}
- WideIVMap.clear();
}
}
-bool IndVarSimplify::runOnLoop(Loop *L, LPPassManager &LPM) {
- // If LoopSimplify form is not available, stay out of trouble. Some notes:
- // - LSR currently only supports LoopSimplify-form loops. Indvars'
- // canonicalization can be a pessimization without LSR to "clean up"
- // afterwards.
- // - We depend on having a preheader; in particular,
- // Loop::getCanonicalInductionVariable only supports loops with preheaders,
- // and we're in trouble if we can't find the induction variable even when
- // we've manually inserted one.
- if (!L->isLoopSimplifyForm())
+//===----------------------------------------------------------------------===//
+// LinearFunctionTestReplace and its kin. Rewrite the loop exit condition.
+//===----------------------------------------------------------------------===//
+
+/// Check for expressions that ScalarEvolution generates to compute
+/// BackedgeTakenInfo. If these expressions have not been reduced, then
+/// expanding them may incur additional cost (albeit in the loop preheader).
+static bool isHighCostExpansion(const SCEV *S, BranchInst *BI,
+ SmallPtrSet<const SCEV*, 8> &Processed,
+ ScalarEvolution *SE) {
+ if (!Processed.insert(S))
return false;
- if (!DisableIVRewrite)
- IU = &getAnalysis<IVUsers>();
- LI = &getAnalysis<LoopInfo>();
- SE = &getAnalysis<ScalarEvolution>();
- DT = &getAnalysis<DominatorTree>();
- TD = getAnalysisIfAvailable<TargetData>();
+ // If the backedge-taken count is a UDiv, it's very likely a UDiv that
+ // ScalarEvolution's HowFarToZero or HowManyLessThans produced to compute a
+ // precise expression, rather than a UDiv from the user's code. If we can't
+ // find a UDiv in the code with some simple searching, assume the former and
+ // forego rewriting the loop.
+ if (isa<SCEVUDivExpr>(S)) {
+ ICmpInst *OrigCond = dyn_cast<ICmpInst>(BI->getCondition());
+ if (!OrigCond) return true;
+ const SCEV *R = SE->getSCEV(OrigCond->getOperand(1));
+ R = SE->getMinusSCEV(R, SE->getConstant(R->getType(), 1));
+ if (R != S) {
+ const SCEV *L = SE->getSCEV(OrigCond->getOperand(0));
+ L = SE->getMinusSCEV(L, SE->getConstant(L->getType(), 1));
+ if (L != S)
+ return true;
+ }
+ }
- DeadInsts.clear();
- Changed = false;
+ // Recurse past add expressions, which commonly occur in the
+ // BackedgeTakenCount. They may already exist in program code, and if not,
+ // they are not too expensive rematerialize.
+ if (const SCEVAddExpr *Add = dyn_cast<SCEVAddExpr>(S)) {
+ for (SCEVAddExpr::op_iterator I = Add->op_begin(), E = Add->op_end();
+ I != E; ++I) {
+ if (isHighCostExpansion(*I, BI, Processed, SE))
+ return true;
+ }
+ return false;
+ }
- // If there are any floating-point recurrences, attempt to
- // transform them to use integer recurrences.
- RewriteNonIntegerIVs(L);
+ // HowManyLessThans uses a Max expression whenever the loop is not guarded by
+ // the exit condition.
+ if (isa<SCEVSMaxExpr>(S) || isa<SCEVUMaxExpr>(S))
+ return true;
+ // If we haven't recognized an expensive SCEV pattern, assume it's an
+ // expression produced by program code.
+ return false;
+}
+
+/// canExpandBackedgeTakenCount - Return true if this loop's backedge taken
+/// count expression can be safely and cheaply expanded into an instruction
+/// sequence that can be used by LinearFunctionTestReplace.
+///
+/// TODO: This fails for pointer-type loop counters with greater than one byte
+/// strides, consequently preventing LFTR from running. For the purpose of LFTR
+/// we could skip this check in the case that the LFTR loop counter (chosen by
+/// FindLoopCounter) is also pointer type. Instead, we could directly convert
+/// the loop test to an inequality test by checking the target data's alignment
+/// of element types (given that the initial pointer value originates from or is
+/// used by ABI constrained operation, as opposed to inttoptr/ptrtoint).
+/// However, we don't yet have a strong motivation for converting loop tests
+/// into inequality tests.
+static bool canExpandBackedgeTakenCount(Loop *L, ScalarEvolution *SE) {
const SCEV *BackedgeTakenCount = SE->getBackedgeTakenCount(L);
+ if (isa<SCEVCouldNotCompute>(BackedgeTakenCount) ||
+ BackedgeTakenCount->isZero())
+ return false;
- // Create a rewriter object which we'll use to transform the code with.
- SCEVExpander Rewriter(*SE, "indvars");
+ if (!L->getExitingBlock())
+ return false;
- // Eliminate redundant IV users.
- //
- // Simplification works best when run before other consumers of SCEV. We
- // attempt to avoid evaluating SCEVs for sign/zero extend operations until
- // other expressions involving loop IVs have been evaluated. This helps SCEV
- // set no-wrap flags before normalizing sign/zero extension.
- if (DisableIVRewrite) {
- Rewriter.disableCanonicalMode();
- SimplifyIVUsersNoRewrite(L, Rewriter);
- }
+ // Can't rewrite non-branch yet.
+ BranchInst *BI = dyn_cast<BranchInst>(L->getExitingBlock()->getTerminator());
+ if (!BI)
+ return false;
- // Check to see if this loop has a computable loop-invariant execution count.
- // If so, this means that we can compute the final value of any expressions
- // that are recurrent in the loop, and substitute the exit values from the
- // loop into any instructions outside of the loop that use the final values of
- // the current expressions.
- //
- if (!isa<SCEVCouldNotCompute>(BackedgeTakenCount))
- RewriteLoopExitValues(L, Rewriter);
+ SmallPtrSet<const SCEV*, 8> Processed;
+ if (isHighCostExpansion(BackedgeTakenCount, BI, Processed, SE))
+ return false;
- // Eliminate redundant IV users.
- if (!DisableIVRewrite)
- SimplifyIVUsers(Rewriter);
-
- // Compute the type of the largest recurrence expression, and decide whether
- // a canonical induction variable should be inserted.
- const Type *LargestType = 0;
- bool NeedCannIV = false;
- bool ExpandBECount = canExpandBackedgeTakenCount(L, SE);
- if (ExpandBECount) {
- // If we have a known trip count and a single exit block, we'll be
- // rewriting the loop exit test condition below, which requires a
- // canonical induction variable.
- NeedCannIV = true;
- const Type *Ty = BackedgeTakenCount->getType();
- if (DisableIVRewrite) {
- // In this mode, SimplifyIVUsers may have already widened the IV used by
- // the backedge test and inserted a Trunc on the compare's operand. Get
- // the wider type to avoid creating a redundant narrow IV only used by the
- // loop test.
- LargestType = getBackedgeIVType(L);
- }
- if (!LargestType ||
- SE->getTypeSizeInBits(Ty) >
- SE->getTypeSizeInBits(LargestType))
- LargestType = SE->getEffectiveSCEVType(Ty);
+ return true;
+}
+
+/// getLoopPhiForCounter - Return the loop header phi IFF IncV adds a loop
+/// invariant value to the phi.
+static PHINode *getLoopPhiForCounter(Value *IncV, Loop *L, DominatorTree *DT) {
+ Instruction *IncI = dyn_cast<Instruction>(IncV);
+ if (!IncI)
+ return 0;
+
+ switch (IncI->getOpcode()) {
+ case Instruction::Add:
+ case Instruction::Sub:
+ break;
+ case Instruction::GetElementPtr:
+ // An IV counter must preserve its type.
+ if (IncI->getNumOperands() == 2)
+ break;
+ default:
+ return 0;
}
- if (!DisableIVRewrite) {
- for (IVUsers::const_iterator I = IU->begin(), E = IU->end(); I != E; ++I) {
- NeedCannIV = true;
- const Type *Ty =
- SE->getEffectiveSCEVType(I->getOperandValToReplace()->getType());
- if (!LargestType ||
- SE->getTypeSizeInBits(Ty) >
- SE->getTypeSizeInBits(LargestType))
- LargestType = Ty;
- }
+
+ PHINode *Phi = dyn_cast<PHINode>(IncI->getOperand(0));
+ if (Phi && Phi->getParent() == L->getHeader()) {
+ if (isLoopInvariant(IncI->getOperand(1), L, DT))
+ return Phi;
+ return 0;
}
+ if (IncI->getOpcode() == Instruction::GetElementPtr)
+ return 0;
- // Now that we know the largest of the induction variable expressions
- // in this loop, insert a canonical induction variable of the largest size.
- PHINode *IndVar = 0;
- if (NeedCannIV) {
- // Check to see if the loop already has any canonical-looking induction
- // variables. If any are present and wider than the planned canonical
- // induction variable, temporarily remove them, so that the Rewriter
- // doesn't attempt to reuse them.
- SmallVector<PHINode *, 2> OldCannIVs;
- while (PHINode *OldCannIV = L->getCanonicalInductionVariable()) {
- if (SE->getTypeSizeInBits(OldCannIV->getType()) >
- SE->getTypeSizeInBits(LargestType))
- OldCannIV->removeFromParent();
- else
- break;
- OldCannIVs.push_back(OldCannIV);
- }
+ // Allow add/sub to be commuted.
+ Phi = dyn_cast<PHINode>(IncI->getOperand(1));
+ if (Phi && Phi->getParent() == L->getHeader()) {
+ if (isLoopInvariant(IncI->getOperand(0), L, DT))
+ return Phi;
+ }
+ return 0;
+}
- IndVar = Rewriter.getOrInsertCanonicalInductionVariable(L, LargestType);
+/// Return the compare guarding the loop latch, or NULL for unrecognized tests.
+static ICmpInst *getLoopTest(Loop *L) {
+ assert(L->getExitingBlock() && "expected loop exit");
- ++NumInserted;
- Changed = true;
- DEBUG(dbgs() << "INDVARS: New CanIV: " << *IndVar << '\n');
+ BasicBlock *LatchBlock = L->getLoopLatch();
+ // Don't bother with LFTR if the loop is not properly simplified.
+ if (!LatchBlock)
+ return 0;
- // Now that the official induction variable is established, reinsert
- // any old canonical-looking variables after it so that the IR remains
- // consistent. They will be deleted as part of the dead-PHI deletion at
- // the end of the pass.
- while (!OldCannIVs.empty()) {
- PHINode *OldCannIV = OldCannIVs.pop_back_val();
- OldCannIV->insertBefore(L->getHeader()->getFirstNonPHI());
- }
- }
+ BranchInst *BI = dyn_cast<BranchInst>(L->getExitingBlock()->getTerminator());
+ assert(BI && "expected exit branch");
- // If we have a trip count expression, rewrite the loop's exit condition
- // using it. We can currently only handle loops with a single exit.
- ICmpInst *NewICmp = 0;
- if (ExpandBECount) {
- assert(canExpandBackedgeTakenCount(L, SE) &&
- "canonical IV disrupted BackedgeTaken expansion");
- assert(NeedCannIV &&
- "LinearFunctionTestReplace requires a canonical induction variable");
- NewICmp = LinearFunctionTestReplace(L, BackedgeTakenCount, IndVar,
- Rewriter);
- }
- // Rewrite IV-derived expressions.
- if (!DisableIVRewrite)
- RewriteIVExpressions(L, Rewriter);
+ return dyn_cast<ICmpInst>(BI->getCondition());
+}
- // Clear the rewriter cache, because values that are in the rewriter's cache
- // can be deleted in the loop below, causing the AssertingVH in the cache to
- // trigger.
- Rewriter.clear();
+/// needsLFTR - LinearFunctionTestReplace policy. Return true unless we can show
+/// that the current exit test is already sufficiently canonical.
+static bool needsLFTR(Loop *L, DominatorTree *DT) {
+ // Do LFTR to simplify the exit condition to an ICMP.
+ ICmpInst *Cond = getLoopTest(L);
+ if (!Cond)
+ return true;
- // Now that we're done iterating through lists, clean up any instructions
- // which are now dead.
- while (!DeadInsts.empty())
- if (Instruction *Inst =
- dyn_cast_or_null<Instruction>(&*DeadInsts.pop_back_val()))
- RecursivelyDeleteTriviallyDeadInstructions(Inst);
+ // Do LFTR to simplify the exit ICMP to EQ/NE
+ ICmpInst::Predicate Pred = Cond->getPredicate();
+ if (Pred != ICmpInst::ICMP_NE && Pred != ICmpInst::ICMP_EQ)
+ return true;
- // The Rewriter may not be used from this point on.
+ // Look for a loop invariant RHS
+ Value *LHS = Cond->getOperand(0);
+ Value *RHS = Cond->getOperand(1);
+ if (!isLoopInvariant(RHS, L, DT)) {
+ if (!isLoopInvariant(LHS, L, DT))
+ return true;
+ std::swap(LHS, RHS);
+ }
+ // Look for a simple IV counter LHS
+ PHINode *Phi = dyn_cast<PHINode>(LHS);
+ if (!Phi)
+ Phi = getLoopPhiForCounter(LHS, L, DT);
- // Loop-invariant instructions in the preheader that aren't used in the
- // loop may be sunk below the loop to reduce register pressure.
- SinkUnusedInvariants(L);
+ if (!Phi)
+ return true;
- // For completeness, inform IVUsers of the IV use in the newly-created
- // loop exit test instruction.
- if (NewICmp && IU)
- IU->AddUsersIfInteresting(cast<Instruction>(NewICmp->getOperand(0)));
+ // Do LFTR if PHI node is defined in the loop, but is *not* a counter.
+ int Idx = Phi->getBasicBlockIndex(L->getLoopLatch());
+ if (Idx < 0)
+ return true;
- // Clean up dead instructions.
- Changed |= DeleteDeadPHIs(L->getHeader());
- // Check a post-condition.
- assert(L->isLCSSAForm(*DT) && "Indvars did not leave the loop in lcssa form!");
- return Changed;
+ // Do LFTR if the exit condition's IV is *not* a simple counter.
+ Value *IncV = Phi->getIncomingValue(Idx);
+ return Phi != getLoopPhiForCounter(IncV, L, DT);
}
-// FIXME: It is an extremely bad idea to indvar substitute anything more
-// complex than affine induction variables. Doing so will put expensive
-// polynomial evaluations inside of the loop, and the str reduction pass
-// currently can only reduce affine polynomials. For now just disable
-// indvar subst on anything more complex than an affine addrec, unless
-// it can be expanded to a trivial value.
-static bool isSafe(const SCEV *S, const Loop *L, ScalarEvolution *SE) {
- // Loop-invariant values are safe.
- if (SE->isLoopInvariant(S, L)) return true;
-
- // Affine addrecs are safe. Non-affine are not, because LSR doesn't know how
- // to transform them into efficient code.
- if (const SCEVAddRecExpr *AR = dyn_cast<SCEVAddRecExpr>(S))
- return AR->isAffine();
-
- // An add is safe it all its operands are safe.
- if (const SCEVCommutativeExpr *Commutative = dyn_cast<SCEVCommutativeExpr>(S)) {
- for (SCEVCommutativeExpr::op_iterator I = Commutative->op_begin(),
- E = Commutative->op_end(); I != E; ++I)
- if (!isSafe(*I, L, SE)) return false;
- return true;
+/// Recursive helper for hasConcreteDef(). Unfortunately, this currently boils
+/// down to checking that all operands are constant and listing instructions
+/// that may hide undef.
+static bool hasConcreteDefImpl(Value *V, SmallPtrSet<Value*, 8> &Visited,
+ unsigned Depth) {
+ if (isa<Constant>(V))
+ return !isa<UndefValue>(V);
+
+ if (Depth >= 6)
+ return false;
+
+ // Conservatively handle non-constant non-instructions. For example, Arguments
+ // may be undef.
+ Instruction *I = dyn_cast<Instruction>(V);
+ if (!I)
+ return false;
+
+ // Load and return values may be undef.
+ if(I->mayReadFromMemory() || isa<CallInst>(I) || isa<InvokeInst>(I))
+ return false;
+
+ // Optimistically handle other instructions.
+ for (User::op_iterator OI = I->op_begin(), E = I->op_end(); OI != E; ++OI) {
+ if (!Visited.insert(*OI))
+ continue;
+ if (!hasConcreteDefImpl(*OI, Visited, Depth+1))
+ return false;
}
+ return true;
+}
- // A cast is safe if its operand is.
- if (const SCEVCastExpr *C = dyn_cast<SCEVCastExpr>(S))
- return isSafe(C->getOperand(), L, SE);
+/// Return true if the given value is concrete. We must prove that undef can
+/// never reach it.
+///
+/// TODO: If we decide that this is a good approach to checking for undef, we
+/// may factor it into a common location.
+static bool hasConcreteDef(Value *V) {
+ SmallPtrSet<Value*, 8> Visited;
+ Visited.insert(V);
+ return hasConcreteDefImpl(V, Visited, 0);
+}
- // A udiv is safe if its operands are.
- if (const SCEVUDivExpr *UD = dyn_cast<SCEVUDivExpr>(S))
- return isSafe(UD->getLHS(), L, SE) &&
- isSafe(UD->getRHS(), L, SE);
+/// AlmostDeadIV - Return true if this IV has any uses other than the (soon to
+/// be rewritten) loop exit test.
+static bool AlmostDeadIV(PHINode *Phi, BasicBlock *LatchBlock, Value *Cond) {
+ int LatchIdx = Phi->getBasicBlockIndex(LatchBlock);
+ Value *IncV = Phi->getIncomingValue(LatchIdx);
- // SCEVUnknown is always safe.
- if (isa<SCEVUnknown>(S))
- return true;
+ for (Value::use_iterator UI = Phi->use_begin(), UE = Phi->use_end();
+ UI != UE; ++UI) {
+ if (*UI != Cond && *UI != IncV) return false;
+ }
- // Nothing else is safe.
- return false;
+ for (Value::use_iterator UI = IncV->use_begin(), UE = IncV->use_end();
+ UI != UE; ++UI) {
+ if (*UI != Cond && *UI != Phi) return false;
+ }
+ return true;
}
-void IndVarSimplify::RewriteIVExpressions(Loop *L, SCEVExpander &Rewriter) {
- // Rewrite all induction variable expressions in terms of the canonical
- // induction variable.
- //
- // If there were induction variables of other sizes or offsets, manually
- // add the offsets to the primary induction variable and cast, avoiding
- // the need for the code evaluation methods to insert induction variables
- // of different sizes.
- for (IVUsers::iterator UI = IU->begin(), E = IU->end(); UI != E; ++UI) {
- Value *Op = UI->getOperandValToReplace();
- const Type *UseTy = Op->getType();
- Instruction *User = UI->getUser();
-
- // Compute the final addrec to expand into code.
- const SCEV *AR = IU->getReplacementExpr(*UI);
-
- // Evaluate the expression out of the loop, if possible.
- if (!L->contains(UI->getUser())) {
- const SCEV *ExitVal = SE->getSCEVAtScope(AR, L->getParentLoop());
- if (SE->isLoopInvariant(ExitVal, L))
- AR = ExitVal;
- }
+/// FindLoopCounter - Find an affine IV in canonical form.
+///
+/// BECount may be an i8* pointer type. The pointer difference is already
+/// valid count without scaling the address stride, so it remains a pointer
+/// expression as far as SCEV is concerned.
+///
+/// Currently only valid for LFTR. See the comments on hasConcreteDef below.
+///
+/// FIXME: Accept -1 stride and set IVLimit = IVInit - BECount
+///
+/// FIXME: Accept non-unit stride as long as SCEV can reduce BECount * Stride.
+/// This is difficult in general for SCEV because of potential overflow. But we
+/// could at least handle constant BECounts.
+static PHINode *
+FindLoopCounter(Loop *L, const SCEV *BECount,
+ ScalarEvolution *SE, DominatorTree *DT, const DataLayout *TD) {
+ uint64_t BCWidth = SE->getTypeSizeInBits(BECount->getType());
+
+ Value *Cond =
+ cast<BranchInst>(L->getExitingBlock()->getTerminator())->getCondition();
+
+ // Loop over all of the PHI nodes, looking for a simple counter.
+ PHINode *BestPhi = 0;
+ const SCEV *BestInit = 0;
+ BasicBlock *LatchBlock = L->getLoopLatch();
+ assert(LatchBlock && "needsLFTR should guarantee a loop latch");
- // FIXME: It is an extremely bad idea to indvar substitute anything more
- // complex than affine induction variables. Doing so will put expensive
- // polynomial evaluations inside of the loop, and the str reduction pass
- // currently can only reduce affine polynomials. For now just disable
- // indvar subst on anything more complex than an affine addrec, unless
- // it can be expanded to a trivial value.
- if (!isSafe(AR, L, SE))
+ for (BasicBlock::iterator I = L->getHeader()->begin(); isa<PHINode>(I); ++I) {
+ PHINode *Phi = cast<PHINode>(I);
+ if (!SE->isSCEVable(Phi->getType()))
+ continue;
+
+ // Avoid comparing an integer IV against a pointer Limit.
+ if (BECount->getType()->isPointerTy() && !Phi->getType()->isPointerTy())
continue;
- // Determine the insertion point for this user. By default, insert
- // immediately before the user. The SCEVExpander class will automatically
- // hoist loop invariants out of the loop. For PHI nodes, there may be
- // multiple uses, so compute the nearest common dominator for the
- // incoming blocks.
- Instruction *InsertPt = User;
- if (PHINode *PHI = dyn_cast<PHINode>(InsertPt))
- for (unsigned i = 0, e = PHI->getNumIncomingValues(); i != e; ++i)
- if (PHI->getIncomingValue(i) == Op) {
- if (InsertPt == User)
- InsertPt = PHI->getIncomingBlock(i)->getTerminator();
- else
- InsertPt =
- DT->findNearestCommonDominator(InsertPt->getParent(),
- PHI->getIncomingBlock(i))
- ->getTerminator();
+ const SCEVAddRecExpr *AR = dyn_cast<SCEVAddRecExpr>(SE->getSCEV(Phi));
+ if (!AR || AR->getLoop() != L || !AR->isAffine())
+ continue;
+
+ // AR may be a pointer type, while BECount is an integer type.
+ // AR may be wider than BECount. With eq/ne tests overflow is immaterial.
+ // AR may not be a narrower type, or we may never exit.
+ uint64_t PhiWidth = SE->getTypeSizeInBits(AR->getType());
+ if (PhiWidth < BCWidth || (TD && !TD->isLegalInteger(PhiWidth)))
+ continue;
+
+ const SCEV *Step = dyn_cast<SCEVConstant>(AR->getStepRecurrence(*SE));
+ if (!Step || !Step->isOne())
+ continue;
+
+ int LatchIdx = Phi->getBasicBlockIndex(LatchBlock);
+ Value *IncV = Phi->getIncomingValue(LatchIdx);
+ if (getLoopPhiForCounter(IncV, L, DT) != Phi)
+ continue;
+
+ // Avoid reusing a potentially undef value to compute other values that may
+ // have originally had a concrete definition.
+ if (!hasConcreteDef(Phi)) {
+ // We explicitly allow unknown phis as long as they are already used by
+ // the loop test. In this case we assume that performing LFTR could not
+ // increase the number of undef users.
+ if (ICmpInst *Cond = getLoopTest(L)) {
+ if (Phi != getLoopPhiForCounter(Cond->getOperand(0), L, DT)
+ && Phi != getLoopPhiForCounter(Cond->getOperand(1), L, DT)) {
+ continue;
}
+ }
+ }
+ const SCEV *Init = AR->getStart();
+
+ if (BestPhi && !AlmostDeadIV(BestPhi, LatchBlock, Cond)) {
+ // Don't force a live loop counter if another IV can be used.
+ if (AlmostDeadIV(Phi, LatchBlock, Cond))
+ continue;
+
+ // Prefer to count-from-zero. This is a more "canonical" counter form. It
+ // also prefers integer to pointer IVs.
+ if (BestInit->isZero() != Init->isZero()) {
+ if (BestInit->isZero())
+ continue;
+ }
+ // If two IVs both count from zero or both count from nonzero then the
+ // narrower is likely a dead phi that has been widened. Use the wider phi
+ // to allow the other to be eliminated.
+ else if (PhiWidth <= SE->getTypeSizeInBits(BestPhi->getType()))
+ continue;
+ }
+ BestPhi = Phi;
+ BestInit = Init;
+ }
+ return BestPhi;
+}
- // Now expand it into actual Instructions and patch it into place.
- Value *NewVal = Rewriter.expandCodeFor(AR, UseTy, InsertPt);
+/// genLoopLimit - Help LinearFunctionTestReplace by generating a value that
+/// holds the RHS of the new loop test.
+static Value *genLoopLimit(PHINode *IndVar, const SCEV *IVCount, Loop *L,
+ SCEVExpander &Rewriter, ScalarEvolution *SE) {
+ const SCEVAddRecExpr *AR = dyn_cast<SCEVAddRecExpr>(SE->getSCEV(IndVar));
+ assert(AR && AR->getLoop() == L && AR->isAffine() && "bad loop counter");
+ const SCEV *IVInit = AR->getStart();
+
+ // IVInit may be a pointer while IVCount is an integer when FindLoopCounter
+ // finds a valid pointer IV. Sign extend BECount in order to materialize a
+ // GEP. Avoid running SCEVExpander on a new pointer value, instead reusing
+ // the existing GEPs whenever possible.
+ if (IndVar->getType()->isPointerTy()
+ && !IVCount->getType()->isPointerTy()) {
+
+ // IVOffset will be the new GEP offset that is interpreted by GEP as a
+ // signed value. IVCount on the other hand represents the loop trip count,
+ // which is an unsigned value. FindLoopCounter only allows induction
+ // variables that have a positive unit stride of one. This means we don't
+ // have to handle the case of negative offsets (yet) and just need to zero
+ // extend IVCount.
+ Type *OfsTy = SE->getEffectiveSCEVType(IVInit->getType());
+ const SCEV *IVOffset = SE->getTruncateOrZeroExtend(IVCount, OfsTy);
+
+ // Expand the code for the iteration count.
+ assert(SE->isLoopInvariant(IVOffset, L) &&
+ "Computed iteration count is not loop invariant!");
+ BranchInst *BI = cast<BranchInst>(L->getExitingBlock()->getTerminator());
+ Value *GEPOffset = Rewriter.expandCodeFor(IVOffset, OfsTy, BI);
+
+ Value *GEPBase = IndVar->getIncomingValueForBlock(L->getLoopPreheader());
+ assert(AR->getStart() == SE->getSCEV(GEPBase) && "bad loop counter");
+ // We could handle pointer IVs other than i8*, but we need to compensate for
+ // gep index scaling. See canExpandBackedgeTakenCount comments.
+ assert(SE->getSizeOfExpr(IntegerType::getInt64Ty(IndVar->getContext()),
+ cast<PointerType>(GEPBase->getType())->getElementType())->isOne()
+ && "unit stride pointer IV must be i8*");
+
+ IRBuilder<> Builder(L->getLoopPreheader()->getTerminator());
+ return Builder.CreateGEP(GEPBase, GEPOffset, "lftr.limit");
+ }
+ else {
+ // In any other case, convert both IVInit and IVCount to integers before
+ // comparing. This may result in SCEV expension of pointers, but in practice
+ // SCEV will fold the pointer arithmetic away as such:
+ // BECount = (IVEnd - IVInit - 1) => IVLimit = IVInit (postinc).
+ //
+ // Valid Cases: (1) both integers is most common; (2) both may be pointers
+ // for simple memset-style loops.
+ //
+ // IVInit integer and IVCount pointer would only occur if a canonical IV
+ // were generated on top of case #2, which is not expected.
+
+ const SCEV *IVLimit = 0;
+ // For unit stride, IVCount = Start + BECount with 2's complement overflow.
+ // For non-zero Start, compute IVCount here.
+ if (AR->getStart()->isZero())
+ IVLimit = IVCount;
+ else {
+ assert(AR->getStepRecurrence(*SE)->isOne() && "only handles unit stride");
+ const SCEV *IVInit = AR->getStart();
+
+ // For integer IVs, truncate the IV before computing IVInit + BECount.
+ if (SE->getTypeSizeInBits(IVInit->getType())
+ > SE->getTypeSizeInBits(IVCount->getType()))
+ IVInit = SE->getTruncateExpr(IVInit, IVCount->getType());
+
+ IVLimit = SE->getAddExpr(IVInit, IVCount);
+ }
+ // Expand the code for the iteration count.
+ BranchInst *BI = cast<BranchInst>(L->getExitingBlock()->getTerminator());
+ IRBuilder<> Builder(BI);
+ assert(SE->isLoopInvariant(IVLimit, L) &&
+ "Computed iteration count is not loop invariant!");
+ // Ensure that we generate the same type as IndVar, or a smaller integer
+ // type. In the presence of null pointer values, we have an integer type
+ // SCEV expression (IVInit) for a pointer type IV value (IndVar).
+ Type *LimitTy = IVCount->getType()->isPointerTy() ?
+ IndVar->getType() : IVCount->getType();
+ return Rewriter.expandCodeFor(IVLimit, LimitTy, BI);
+ }
+}
- DEBUG(dbgs() << "INDVARS: Rewrote IV '" << *AR << "' " << *Op << '\n'
- << " into = " << *NewVal << "\n");
+/// LinearFunctionTestReplace - This method rewrites the exit condition of the
+/// loop to be a canonical != comparison against the incremented loop induction
+/// variable. This pass is able to rewrite the exit tests of any loop where the
+/// SCEV analysis can determine a loop-invariant trip count of the loop, which
+/// is actually a much broader range than just linear tests.
+Value *IndVarSimplify::
+LinearFunctionTestReplace(Loop *L,
+ const SCEV *BackedgeTakenCount,
+ PHINode *IndVar,
+ SCEVExpander &Rewriter) {
+ assert(canExpandBackedgeTakenCount(L, SE) && "precondition");
+
+ // Initialize CmpIndVar and IVCount to their preincremented values.
+ Value *CmpIndVar = IndVar;
+ const SCEV *IVCount = BackedgeTakenCount;
+
+ // If the exiting block is the same as the backedge block, we prefer to
+ // compare against the post-incremented value, otherwise we must compare
+ // against the preincremented value.
+ if (L->getExitingBlock() == L->getLoopLatch()) {
+ // Add one to the "backedge-taken" count to get the trip count.
+ // This addition may overflow, which is valid as long as the comparison is
+ // truncated to BackedgeTakenCount->getType().
+ IVCount = SE->getAddExpr(BackedgeTakenCount,
+ SE->getConstant(BackedgeTakenCount->getType(), 1));
+ // The BackedgeTaken expression contains the number of times that the
+ // backedge branches to the loop header. This is one less than the
+ // number of times the loop executes, so use the incremented indvar.
+ CmpIndVar = IndVar->getIncomingValueForBlock(L->getExitingBlock());
+ }
+
+ Value *ExitCnt = genLoopLimit(IndVar, IVCount, L, Rewriter, SE);
+ assert(ExitCnt->getType()->isPointerTy() == IndVar->getType()->isPointerTy()
+ && "genLoopLimit missed a cast");
+
+ // Insert a new icmp_ne or icmp_eq instruction before the branch.
+ BranchInst *BI = cast<BranchInst>(L->getExitingBlock()->getTerminator());
+ ICmpInst::Predicate P;
+ if (L->contains(BI->getSuccessor(0)))
+ P = ICmpInst::ICMP_NE;
+ else
+ P = ICmpInst::ICMP_EQ;
+
+ DEBUG(dbgs() << "INDVARS: Rewriting loop exit condition to:\n"
+ << " LHS:" << *CmpIndVar << '\n'
+ << " op:\t"
+ << (P == ICmpInst::ICMP_NE ? "!=" : "==") << "\n"
+ << " RHS:\t" << *ExitCnt << "\n"
+ << " IVCount:\t" << *IVCount << "\n");
+
+ IRBuilder<> Builder(BI);
+
+ // LFTR can ignore IV overflow and truncate to the width of
+ // BECount. This avoids materializing the add(zext(add)) expression.
+ unsigned CmpIndVarSize = SE->getTypeSizeInBits(CmpIndVar->getType());
+ unsigned ExitCntSize = SE->getTypeSizeInBits(ExitCnt->getType());
+ if (CmpIndVarSize > ExitCntSize) {
+ const SCEVAddRecExpr *AR = cast<SCEVAddRecExpr>(SE->getSCEV(IndVar));
+ const SCEV *ARStart = AR->getStart();
+ const SCEV *ARStep = AR->getStepRecurrence(*SE);
+ // For constant IVCount, avoid truncation.
+ if (isa<SCEVConstant>(ARStart) && isa<SCEVConstant>(IVCount)) {
+ const APInt &Start = cast<SCEVConstant>(ARStart)->getValue()->getValue();
+ APInt Count = cast<SCEVConstant>(IVCount)->getValue()->getValue();
+ // Note that the post-inc value of BackedgeTakenCount may have overflowed
+ // above such that IVCount is now zero.
+ if (IVCount != BackedgeTakenCount && Count == 0) {
+ Count = APInt::getMaxValue(Count.getBitWidth()).zext(CmpIndVarSize);
+ ++Count;
+ }
+ else
+ Count = Count.zext(CmpIndVarSize);
+ APInt NewLimit;
+ if (cast<SCEVConstant>(ARStep)->getValue()->isNegative())
+ NewLimit = Start - Count;
+ else
+ NewLimit = Start + Count;
+ ExitCnt = ConstantInt::get(CmpIndVar->getType(), NewLimit);
+
+ DEBUG(dbgs() << " Widen RHS:\t" << *ExitCnt << "\n");
+ } else {
+ CmpIndVar = Builder.CreateTrunc(CmpIndVar, ExitCnt->getType(),
+ "lftr.wideiv");
+ }
+ }
+ Value *Cond = Builder.CreateICmp(P, CmpIndVar, ExitCnt, "exitcond");
+ Value *OrigCond = BI->getCondition();
+ // It's tempting to use replaceAllUsesWith here to fully replace the old
+ // comparison, but that's not immediately safe, since users of the old
+ // comparison may not be dominated by the new comparison. Instead, just
+ // update the branch to use the new comparison; in the common case this
+ // will make old comparison dead.
+ BI->setCondition(Cond);
+ DeadInsts.push_back(OrigCond);
- if (!isValidRewrite(Op, NewVal)) {
- DeadInsts.push_back(NewVal);
- continue;
- }
- // Inform ScalarEvolution that this value is changing. The change doesn't
- // affect its value, but it does potentially affect which use lists the
- // value will be on after the replacement, which affects ScalarEvolution's
- // ability to walk use lists and drop dangling pointers when a value is
- // deleted.
- SE->forgetValue(User);
-
- // Patch the new value into place.
- if (Op->hasName())
- NewVal->takeName(Op);
- if (Instruction *NewValI = dyn_cast<Instruction>(NewVal))
- NewValI->setDebugLoc(User->getDebugLoc());
- User->replaceUsesOfWith(Op, NewVal);
- UI->setOperandValToReplace(NewVal);
-
- ++NumRemoved;
- Changed = true;
-
- // The old value may be dead now.
- DeadInsts.push_back(Op);
- }
+ ++NumLFTR;
+ Changed = true;
+ return Cond;
}
+//===----------------------------------------------------------------------===//
+// SinkUnusedInvariants. A late subpass to cleanup loop preheaders.
+//===----------------------------------------------------------------------===//
+
/// If there's a single exit block, sink any loop-invariant values that
/// were defined in the preheader but not used inside the loop into the
/// exit block to reduce register pressure in the loop.
BasicBlock *Preheader = L->getLoopPreheader();
if (!Preheader) return;
- Instruction *InsertPt = ExitBlock->getFirstNonPHI();
+ Instruction *InsertPt = ExitBlock->getFirstInsertionPt();
BasicBlock::iterator I = Preheader->getTerminator();
while (I != Preheader->begin()) {
--I;
if (isa<DbgInfoIntrinsic>(I))
continue;
- // Don't sink static AllocaInsts out of the entry block, which would
- // turn them into dynamic allocas!
- if (AllocaInst *AI = dyn_cast<AllocaInst>(I))
- if (AI->isStaticAlloca())
- continue;
+ // Skip landingpad instructions.
+ if (isa<LandingPadInst>(I))
+ continue;
+
+ // Don't sink alloca: we never want to sink static alloca's out of the
+ // entry block, and correctly sinking dynamic alloca's requires
+ // checks for stacksave/stackrestore intrinsics.
+ // FIXME: Refactor this check somehow?
+ if (isa<AllocaInst>(I))
+ continue;
// Determine if there is a use in or before the loop (direct or
// otherwise).
}
}
-/// ConvertToSInt - Convert APF to an integer, if possible.
-static bool ConvertToSInt(const APFloat &APF, int64_t &IntVal) {
- bool isExact = false;
- if (&APF.getSemantics() == &APFloat::PPCDoubleDouble)
- return false;
- // See if we can convert this to an int64_t
- uint64_t UIntVal;
- if (APF.convertToInteger(&UIntVal, 64, true, APFloat::rmTowardZero,
- &isExact) != APFloat::opOK || !isExact)
- return false;
- IntVal = UIntVal;
- return true;
-}
-
-/// HandleFloatingPointIV - If the loop has floating induction variable
-/// then insert corresponding integer induction variable if possible.
-/// For example,
-/// for(double i = 0; i < 10000; ++i)
-/// bar(i)
-/// is converted into
-/// for(int i = 0; i < 10000; ++i)
-/// bar((double)i);
-///
-void IndVarSimplify::HandleFloatingPointIV(Loop *L, PHINode *PN) {
- unsigned IncomingEdge = L->contains(PN->getIncomingBlock(0));
- unsigned BackEdge = IncomingEdge^1;
-
- // Check incoming value.
- ConstantFP *InitValueVal =
- dyn_cast<ConstantFP>(PN->getIncomingValue(IncomingEdge));
-
- int64_t InitValue;
- if (!InitValueVal || !ConvertToSInt(InitValueVal->getValueAPF(), InitValue))
- return;
-
- // Check IV increment. Reject this PN if increment operation is not
- // an add or increment value can not be represented by an integer.
- BinaryOperator *Incr =
- dyn_cast<BinaryOperator>(PN->getIncomingValue(BackEdge));
- if (Incr == 0 || Incr->getOpcode() != Instruction::FAdd) return;
-
- // If this is not an add of the PHI with a constantfp, or if the constant fp
- // is not an integer, bail out.
- ConstantFP *IncValueVal = dyn_cast<ConstantFP>(Incr->getOperand(1));
- int64_t IncValue;
- if (IncValueVal == 0 || Incr->getOperand(0) != PN ||
- !ConvertToSInt(IncValueVal->getValueAPF(), IncValue))
- return;
-
- // Check Incr uses. One user is PN and the other user is an exit condition
- // used by the conditional terminator.
- Value::use_iterator IncrUse = Incr->use_begin();
- Instruction *U1 = cast<Instruction>(*IncrUse++);
- if (IncrUse == Incr->use_end()) return;
- Instruction *U2 = cast<Instruction>(*IncrUse++);
- if (IncrUse != Incr->use_end()) return;
-
- // Find exit condition, which is an fcmp. If it doesn't exist, or if it isn't
- // only used by a branch, we can't transform it.
- FCmpInst *Compare = dyn_cast<FCmpInst>(U1);
- if (!Compare)
- Compare = dyn_cast<FCmpInst>(U2);
- if (Compare == 0 || !Compare->hasOneUse() ||
- !isa<BranchInst>(Compare->use_back()))
- return;
-
- BranchInst *TheBr = cast<BranchInst>(Compare->use_back());
-
- // We need to verify that the branch actually controls the iteration count
- // of the loop. If not, the new IV can overflow and no one will notice.
- // The branch block must be in the loop and one of the successors must be out
- // of the loop.
- assert(TheBr->isConditional() && "Can't use fcmp if not conditional");
- if (!L->contains(TheBr->getParent()) ||
- (L->contains(TheBr->getSuccessor(0)) &&
- L->contains(TheBr->getSuccessor(1))))
- return;
-
-
- // If it isn't a comparison with an integer-as-fp (the exit value), we can't
- // transform it.
- ConstantFP *ExitValueVal = dyn_cast<ConstantFP>(Compare->getOperand(1));
- int64_t ExitValue;
- if (ExitValueVal == 0 ||
- !ConvertToSInt(ExitValueVal->getValueAPF(), ExitValue))
- return;
-
- // Find new predicate for integer comparison.
- CmpInst::Predicate NewPred = CmpInst::BAD_ICMP_PREDICATE;
- switch (Compare->getPredicate()) {
- default: return; // Unknown comparison.
- case CmpInst::FCMP_OEQ:
- case CmpInst::FCMP_UEQ: NewPred = CmpInst::ICMP_EQ; break;
- case CmpInst::FCMP_ONE:
- case CmpInst::FCMP_UNE: NewPred = CmpInst::ICMP_NE; break;
- case CmpInst::FCMP_OGT:
- case CmpInst::FCMP_UGT: NewPred = CmpInst::ICMP_SGT; break;
- case CmpInst::FCMP_OGE:
- case CmpInst::FCMP_UGE: NewPred = CmpInst::ICMP_SGE; break;
- case CmpInst::FCMP_OLT:
- case CmpInst::FCMP_ULT: NewPred = CmpInst::ICMP_SLT; break;
- case CmpInst::FCMP_OLE:
- case CmpInst::FCMP_ULE: NewPred = CmpInst::ICMP_SLE; break;
- }
+//===----------------------------------------------------------------------===//
+// IndVarSimplify driver. Manage several subpasses of IV simplification.
+//===----------------------------------------------------------------------===//
- // We convert the floating point induction variable to a signed i32 value if
- // we can. This is only safe if the comparison will not overflow in a way
- // that won't be trapped by the integer equivalent operations. Check for this
- // now.
- // TODO: We could use i64 if it is native and the range requires it.
+bool IndVarSimplify::runOnLoop(Loop *L, LPPassManager &LPM) {
+ // If LoopSimplify form is not available, stay out of trouble. Some notes:
+ // - LSR currently only supports LoopSimplify-form loops. Indvars'
+ // canonicalization can be a pessimization without LSR to "clean up"
+ // afterwards.
+ // - We depend on having a preheader; in particular,
+ // Loop::getCanonicalInductionVariable only supports loops with preheaders,
+ // and we're in trouble if we can't find the induction variable even when
+ // we've manually inserted one.
+ if (!L->isLoopSimplifyForm())
+ return false;
- // The start/stride/exit values must all fit in signed i32.
- if (!isInt<32>(InitValue) || !isInt<32>(IncValue) || !isInt<32>(ExitValue))
- return;
+ LI = &getAnalysis<LoopInfo>();
+ SE = &getAnalysis<ScalarEvolution>();
+ DT = &getAnalysis<DominatorTree>();
+ TD = getAnalysisIfAvailable<DataLayout>();
+ TLI = getAnalysisIfAvailable<TargetLibraryInfo>();
- // If not actually striding (add x, 0.0), avoid touching the code.
- if (IncValue == 0)
- return;
+ DeadInsts.clear();
+ Changed = false;
- // Positive and negative strides have different safety conditions.
- if (IncValue > 0) {
- // If we have a positive stride, we require the init to be less than the
- // exit value and an equality or less than comparison.
- if (InitValue >= ExitValue ||
- NewPred == CmpInst::ICMP_SGT || NewPred == CmpInst::ICMP_SGE)
- return;
+ // If there are any floating-point recurrences, attempt to
+ // transform them to use integer recurrences.
+ RewriteNonIntegerIVs(L);
- uint32_t Range = uint32_t(ExitValue-InitValue);
- if (NewPred == CmpInst::ICMP_SLE) {
- // Normalize SLE -> SLT, check for infinite loop.
- if (++Range == 0) return; // Range overflows.
- }
+ const SCEV *BackedgeTakenCount = SE->getBackedgeTakenCount(L);
- unsigned Leftover = Range % uint32_t(IncValue);
+ // Create a rewriter object which we'll use to transform the code with.
+ SCEVExpander Rewriter(*SE, "indvars");
+#ifndef NDEBUG
+ Rewriter.setDebugType(DEBUG_TYPE);
+#endif
- // If this is an equality comparison, we require that the strided value
- // exactly land on the exit value, otherwise the IV condition will wrap
- // around and do things the fp IV wouldn't.
- if ((NewPred == CmpInst::ICMP_EQ || NewPred == CmpInst::ICMP_NE) &&
- Leftover != 0)
- return;
+ // Eliminate redundant IV users.
+ //
+ // Simplification works best when run before other consumers of SCEV. We
+ // attempt to avoid evaluating SCEVs for sign/zero extend operations until
+ // other expressions involving loop IVs have been evaluated. This helps SCEV
+ // set no-wrap flags before normalizing sign/zero extension.
+ Rewriter.disableCanonicalMode();
+ SimplifyAndExtend(L, Rewriter, LPM);
- // If the stride would wrap around the i32 before exiting, we can't
- // transform the IV.
- if (Leftover != 0 && int32_t(ExitValue+IncValue) < ExitValue)
- return;
+ // Check to see if this loop has a computable loop-invariant execution count.
+ // If so, this means that we can compute the final value of any expressions
+ // that are recurrent in the loop, and substitute the exit values from the
+ // loop into any instructions outside of the loop that use the final values of
+ // the current expressions.
+ //
+ if (!isa<SCEVCouldNotCompute>(BackedgeTakenCount))
+ RewriteLoopExitValues(L, Rewriter);
- } else {
- // If we have a negative stride, we require the init to be greater than the
- // exit value and an equality or greater than comparison.
- if (InitValue >= ExitValue ||
- NewPred == CmpInst::ICMP_SLT || NewPred == CmpInst::ICMP_SLE)
- return;
+ // Eliminate redundant IV cycles.
+ NumElimIV += Rewriter.replaceCongruentIVs(L, DT, DeadInsts);
- uint32_t Range = uint32_t(InitValue-ExitValue);
- if (NewPred == CmpInst::ICMP_SGE) {
- // Normalize SGE -> SGT, check for infinite loop.
- if (++Range == 0) return; // Range overflows.
+ // If we have a trip count expression, rewrite the loop's exit condition
+ // using it. We can currently only handle loops with a single exit.
+ if (canExpandBackedgeTakenCount(L, SE) && needsLFTR(L, DT)) {
+ PHINode *IndVar = FindLoopCounter(L, BackedgeTakenCount, SE, DT, TD);
+ if (IndVar) {
+ // Check preconditions for proper SCEVExpander operation. SCEV does not
+ // express SCEVExpander's dependencies, such as LoopSimplify. Instead any
+ // pass that uses the SCEVExpander must do it. This does not work well for
+ // loop passes because SCEVExpander makes assumptions about all loops, while
+ // LoopPassManager only forces the current loop to be simplified.
+ //
+ // FIXME: SCEV expansion has no way to bail out, so the caller must
+ // explicitly check any assumptions made by SCEV. Brittle.
+ const SCEVAddRecExpr *AR = dyn_cast<SCEVAddRecExpr>(BackedgeTakenCount);
+ if (!AR || AR->getLoop()->getLoopPreheader())
+ (void)LinearFunctionTestReplace(L, BackedgeTakenCount, IndVar,
+ Rewriter);
}
-
- unsigned Leftover = Range % uint32_t(-IncValue);
-
- // If this is an equality comparison, we require that the strided value
- // exactly land on the exit value, otherwise the IV condition will wrap
- // around and do things the fp IV wouldn't.
- if ((NewPred == CmpInst::ICMP_EQ || NewPred == CmpInst::ICMP_NE) &&
- Leftover != 0)
- return;
-
- // If the stride would wrap around the i32 before exiting, we can't
- // transform the IV.
- if (Leftover != 0 && int32_t(ExitValue+IncValue) > ExitValue)
- return;
}
+ // Clear the rewriter cache, because values that are in the rewriter's cache
+ // can be deleted in the loop below, causing the AssertingVH in the cache to
+ // trigger.
+ Rewriter.clear();
- const IntegerType *Int32Ty = Type::getInt32Ty(PN->getContext());
-
- // Insert new integer induction variable.
- PHINode *NewPHI = PHINode::Create(Int32Ty, 2, PN->getName()+".int", PN);
- NewPHI->addIncoming(ConstantInt::get(Int32Ty, InitValue),
- PN->getIncomingBlock(IncomingEdge));
-
- Value *NewAdd =
- BinaryOperator::CreateAdd(NewPHI, ConstantInt::get(Int32Ty, IncValue),
- Incr->getName()+".int", Incr);
- NewPHI->addIncoming(NewAdd, PN->getIncomingBlock(BackEdge));
-
- ICmpInst *NewCompare = new ICmpInst(TheBr, NewPred, NewAdd,
- ConstantInt::get(Int32Ty, ExitValue),
- Compare->getName());
+ // Now that we're done iterating through lists, clean up any instructions
+ // which are now dead.
+ while (!DeadInsts.empty())
+ if (Instruction *Inst =
+ dyn_cast_or_null<Instruction>(&*DeadInsts.pop_back_val()))
+ RecursivelyDeleteTriviallyDeadInstructions(Inst, TLI);
- // In the following deletions, PN may become dead and may be deleted.
- // Use a WeakVH to observe whether this happens.
- WeakVH WeakPH = PN;
+ // The Rewriter may not be used from this point on.
- // Delete the old floating point exit comparison. The branch starts using the
- // new comparison.
- NewCompare->takeName(Compare);
- Compare->replaceAllUsesWith(NewCompare);
- RecursivelyDeleteTriviallyDeadInstructions(Compare);
+ // Loop-invariant instructions in the preheader that aren't used in the
+ // loop may be sunk below the loop to reduce register pressure.
+ SinkUnusedInvariants(L);
- // Delete the old floating point increment.
- Incr->replaceAllUsesWith(UndefValue::get(Incr->getType()));
- RecursivelyDeleteTriviallyDeadInstructions(Incr);
+ // Clean up dead instructions.
+ Changed |= DeleteDeadPHIs(L->getHeader(), TLI);
+ // Check a post-condition.
+ assert(L->isLCSSAForm(*DT) &&
+ "Indvars did not leave the loop in lcssa form!");
- // If the FP induction variable still has uses, this is because something else
- // in the loop uses its value. In order to canonicalize the induction
- // variable, we chose to eliminate the IV and rewrite it in terms of an
- // int->fp cast.
- //
- // We give preference to sitofp over uitofp because it is faster on most
- // platforms.
- if (WeakPH) {
- Value *Conv = new SIToFPInst(NewPHI, PN->getType(), "indvar.conv",
- PN->getParent()->getFirstNonPHI());
- PN->replaceAllUsesWith(Conv);
- RecursivelyDeleteTriviallyDeadInstructions(PN);
+ // Verify that LFTR, and any other change have not interfered with SCEV's
+ // ability to compute trip count.
+#ifndef NDEBUG
+ if (VerifyIndvars && !isa<SCEVCouldNotCompute>(BackedgeTakenCount)) {
+ SE->forgetLoop(L);
+ const SCEV *NewBECount = SE->getBackedgeTakenCount(L);
+ if (SE->getTypeSizeInBits(BackedgeTakenCount->getType()) <
+ SE->getTypeSizeInBits(NewBECount->getType()))
+ NewBECount = SE->getTruncateOrNoop(NewBECount,
+ BackedgeTakenCount->getType());
+ else
+ BackedgeTakenCount = SE->getTruncateOrNoop(BackedgeTakenCount,
+ NewBECount->getType());
+ assert(BackedgeTakenCount == NewBECount && "indvars must preserve SCEV");
}
+#endif
- // Add a new IVUsers entry for the newly-created integer PHI.
- if (IU)
- IU->AddUsersIfInteresting(NewPHI);
+ return Changed;
}