//
//===----------------------------------------------------------------------===//
-#include "InstCombine.h"
+#include "InstCombineInternal.h"
+#include "llvm/ADT/APSInt.h"
+#include "llvm/ADT/Statistic.h"
#include "llvm/Analysis/ConstantFolding.h"
#include "llvm/Analysis/InstructionSimplify.h"
#include "llvm/Analysis/MemoryBuiltins.h"
+#include "llvm/IR/ConstantRange.h"
#include "llvm/IR/DataLayout.h"
+#include "llvm/IR/GetElementPtrTypeIterator.h"
#include "llvm/IR/IntrinsicInst.h"
-#include "llvm/Support/ConstantRange.h"
-#include "llvm/Support/GetElementPtrTypeIterator.h"
-#include "llvm/Support/PatternMatch.h"
-#include "llvm/Target/TargetLibraryInfo.h"
+#include "llvm/IR/PatternMatch.h"
+#include "llvm/Support/CommandLine.h"
+#include "llvm/Support/Debug.h"
+#include "llvm/Analysis/TargetLibraryInfo.h"
+
using namespace llvm;
using namespace PatternMatch;
+#define DEBUG_TYPE "instcombine"
+
+// How many times is a select replaced by one of its operands?
+STATISTIC(NumSel, "Number of select opts");
+
+// Initialization Routines
+
static ConstantInt *getOne(Constant *C) {
return ConstantInt::get(cast<IntegerType>(C->getType()), 1);
}
Max = KnownOne|UnknownBits;
}
-
-
/// FoldCmpLoadFromIndexedGlobal - Called we see this pattern:
/// cmp pred (load (gep GV, ...)), cmpcst
/// where GV is a global variable with a constant initializer. Try to simplify
Instruction *InstCombiner::
FoldCmpLoadFromIndexedGlobal(GetElementPtrInst *GEP, GlobalVariable *GV,
CmpInst &ICI, ConstantInt *AndCst) {
- // We need TD information to know the pointer size unless this is inbounds.
- if (!GEP->isInBounds() && DL == 0)
- return 0;
-
Constant *Init = GV->getInitializer();
if (!isa<ConstantArray>(Init) && !isa<ConstantDataArray>(Init))
- return 0;
+ return nullptr;
uint64_t ArrayElementCount = Init->getType()->getArrayNumElements();
- if (ArrayElementCount > 1024) return 0; // Don't blow up on huge arrays.
+ if (ArrayElementCount > 1024) return nullptr; // Don't blow up on huge arrays.
// There are many forms of this optimization we can handle, for now, just do
// the simple index into a single-dimensional array.
!isa<ConstantInt>(GEP->getOperand(1)) ||
!cast<ConstantInt>(GEP->getOperand(1))->isZero() ||
isa<Constant>(GEP->getOperand(2)))
- return 0;
+ return nullptr;
// Check that indices after the variable are constants and in-range for the
// type they index. Collect the indices. This is typically for arrays of
Type *EltTy = Init->getType()->getArrayElementType();
for (unsigned i = 3, e = GEP->getNumOperands(); i != e; ++i) {
ConstantInt *Idx = dyn_cast<ConstantInt>(GEP->getOperand(i));
- if (Idx == 0) return 0; // Variable index.
+ if (!Idx) return nullptr; // Variable index.
uint64_t IdxVal = Idx->getZExtValue();
- if ((unsigned)IdxVal != IdxVal) return 0; // Too large array index.
+ if ((unsigned)IdxVal != IdxVal) return nullptr; // Too large array index.
if (StructType *STy = dyn_cast<StructType>(EltTy))
EltTy = STy->getElementType(IdxVal);
else if (ArrayType *ATy = dyn_cast<ArrayType>(EltTy)) {
- if (IdxVal >= ATy->getNumElements()) return 0;
+ if (IdxVal >= ATy->getNumElements()) return nullptr;
EltTy = ATy->getElementType();
} else {
- return 0; // Unknown type.
+ return nullptr; // Unknown type.
}
LaterIndices.push_back(IdxVal);
// the array, this will fully represent all the comparison results.
uint64_t MagicBitvector = 0;
-
// Scan the array and see if one of our patterns matches.
Constant *CompareRHS = cast<Constant>(ICI.getOperand(1));
for (unsigned i = 0, e = ArrayElementCount; i != e; ++i) {
Constant *Elt = Init->getAggregateElement(i);
- if (Elt == 0) return 0;
+ if (!Elt) return nullptr;
// If this is indexing an array of structures, get the structure element.
if (!LaterIndices.empty())
// If we can't compute the result for any of the elements, we have to give
// up evaluating the entire conditional.
- if (!isa<ConstantInt>(C)) return 0;
+ if (!isa<ConstantInt>(C)) return nullptr;
// Otherwise, we know if the comparison is true or false for this element,
// update our state machines.
}
}
-
// If this element is in range, update our magic bitvector.
if (i < 64 && IsTrueForElt)
MagicBitvector |= 1ULL << i;
if ((i & 8) == 0 && i >= 64 && SecondTrueElement == Overdefined &&
SecondFalseElement == Overdefined && TrueRangeEnd == Overdefined &&
FalseRangeEnd == Overdefined)
- return 0;
+ return nullptr;
}
// Now that we've scanned the entire array, emit our new comparison(s). We
// index down like the GEP would do implicitly. We don't have to do this for
// an inbounds GEP because the index can't be out of range.
if (!GEP->isInBounds()) {
- Type *IntPtrTy = DL->getIntPtrType(GEP->getType());
+ Type *IntPtrTy = DL.getIntPtrType(GEP->getType());
unsigned PtrSize = IntPtrTy->getIntegerBitWidth();
if (Idx->getType()->getPrimitiveSizeInBits() > PtrSize)
Idx = Builder->CreateTrunc(Idx, IntPtrTy);
return new ICmpInst(ICmpInst::ICMP_UGT, Idx, End);
}
-
// If a magic bitvector captures the entire comparison state
// of this load, replace it with computation that does:
// ((magic_cst >> i) & 1) != 0
{
- Type *Ty = 0;
+ Type *Ty = nullptr;
// Look for an appropriate type:
// - The type of Idx if the magic fits
// - Default to i32
if (ArrayElementCount <= Idx->getType()->getIntegerBitWidth())
Ty = Idx->getType();
- else if (DL)
- Ty = DL->getSmallestLegalIntType(Init->getContext(), ArrayElementCount);
- else if (ArrayElementCount <= 32)
- Ty = Type::getInt32Ty(Init->getContext());
+ else
+ Ty = DL.getSmallestLegalIntType(Init->getContext(), ArrayElementCount);
- if (Ty != 0) {
+ if (Ty) {
Value *V = Builder->CreateIntCast(Idx, Ty, false);
V = Builder->CreateLShr(ConstantInt::get(Ty, MagicBitvector), V);
V = Builder->CreateAnd(ConstantInt::get(Ty, 1), V);
}
}
- return 0;
+ return nullptr;
}
-
/// EvaluateGEPOffsetExpression - Return a value that can be used to compare
/// the *offset* implied by a GEP to zero. For example, if we have &A[i], we
/// want to return 'i' for "icmp ne i, 0". Note that, in general, indices can
///
/// If we can't emit an optimized form for this expression, this returns null.
///
-static Value *EvaluateGEPOffsetExpression(User *GEP, InstCombiner &IC) {
- DataLayout &DL = *IC.getDataLayout();
+static Value *EvaluateGEPOffsetExpression(User *GEP, InstCombiner &IC,
+ const DataLayout &DL) {
gep_type_iterator GTI = gep_type_begin(GEP);
// Check to see if this gep only has a single variable index. If so, and if
// If there are no variable indices, we must have a constant offset, just
// evaluate it the general way.
- if (i == e) return 0;
+ if (i == e) return nullptr;
Value *VariableIdx = GEP->getOperand(i);
// Determine the scale factor of the variable element. For example, this is
// Verify that there are no other variable indices. If so, emit the hard way.
for (++i, ++GTI; i != e; ++i, ++GTI) {
ConstantInt *CI = dyn_cast<ConstantInt>(GEP->getOperand(i));
- if (!CI) return 0;
+ if (!CI) return nullptr;
// Compute the aggregate offset of constant indices.
if (CI->isZero()) continue;
}
}
-
-
// Okay, we know we have a single variable index, which must be a
// pointer/array/vector index. If there is no offset, life is simple, return
// the index.
// multiple of the variable scale.
int64_t NewOffs = Offset / (int64_t)VariableScale;
if (Offset != NewOffs*(int64_t)VariableScale)
- return 0;
+ return nullptr;
// Okay, we can do this evaluation. Start by converting the index to intptr.
if (VariableIdx->getType() != IntPtrTy)
// e.g. "&foo[0] <s &foo[1]" can't be folded to "true" because "foo" could be
// the maximum signed value for the pointer type.
if (ICmpInst::isSigned(Cond))
- return 0;
+ return nullptr;
- // Look through bitcasts.
- if (BitCastInst *BCI = dyn_cast<BitCastInst>(RHS))
- RHS = BCI->getOperand(0);
+ // Look through bitcasts and addrspacecasts. We do not however want to remove
+ // 0 GEPs.
+ if (!isa<GetElementPtrInst>(RHS))
+ RHS = RHS->stripPointerCasts();
Value *PtrBase = GEPLHS->getOperand(0);
- if (DL && PtrBase == RHS && GEPLHS->isInBounds()) {
+ if (PtrBase == RHS && GEPLHS->isInBounds()) {
// ((gep Ptr, OFFSET) cmp Ptr) ---> (OFFSET cmp 0).
// This transformation (ignoring the base and scales) is valid because we
// know pointers can't overflow since the gep is inbounds. See if we can
// output an optimized form.
- Value *Offset = EvaluateGEPOffsetExpression(GEPLHS, *this);
+ Value *Offset = EvaluateGEPOffsetExpression(GEPLHS, *this, DL);
// If not, synthesize the offset the hard way.
- if (Offset == 0)
+ if (!Offset)
Offset = EmitGEPOffset(GEPLHS);
return new ICmpInst(ICmpInst::getSignedPredicate(Cond), Offset,
Constant::getNullValue(Offset->getType()));
// If we're comparing GEPs with two base pointers that only differ in type
// and both GEPs have only constant indices or just one use, then fold
// the compare with the adjusted indices.
- if (DL && GEPLHS->isInBounds() && GEPRHS->isInBounds() &&
+ if (GEPLHS->isInBounds() && GEPRHS->isInBounds() &&
(GEPLHS->hasAllConstantIndices() || GEPLHS->hasOneUse()) &&
(GEPRHS->hasAllConstantIndices() || GEPRHS->hasOneUse()) &&
PtrBase->stripPointerCasts() ==
- GEPRHS->getOperand(0)->stripPointerCasts()) {
+ GEPRHS->getOperand(0)->stripPointerCasts()) {
+ Value *LOffset = EmitGEPOffset(GEPLHS);
+ Value *ROffset = EmitGEPOffset(GEPRHS);
+
+ // If we looked through an addrspacecast between different sized address
+ // spaces, the LHS and RHS pointers are different sized
+ // integers. Truncate to the smaller one.
+ Type *LHSIndexTy = LOffset->getType();
+ Type *RHSIndexTy = ROffset->getType();
+ if (LHSIndexTy != RHSIndexTy) {
+ if (LHSIndexTy->getPrimitiveSizeInBits() <
+ RHSIndexTy->getPrimitiveSizeInBits()) {
+ ROffset = Builder->CreateTrunc(ROffset, LHSIndexTy);
+ } else
+ LOffset = Builder->CreateTrunc(LOffset, RHSIndexTy);
+ }
+
Value *Cmp = Builder->CreateICmp(ICmpInst::getSignedPredicate(Cond),
- EmitGEPOffset(GEPLHS),
- EmitGEPOffset(GEPRHS));
+ LOffset, ROffset);
return ReplaceInstUsesWith(I, Cmp);
}
// Otherwise, the base pointers are different and the indices are
// different, bail out.
- return 0;
+ return nullptr;
}
// If one of the GEPs has all zero indices, recurse.
- bool AllZeros = true;
- for (unsigned i = 1, e = GEPLHS->getNumOperands(); i != e; ++i)
- if (!isa<Constant>(GEPLHS->getOperand(i)) ||
- !cast<Constant>(GEPLHS->getOperand(i))->isNullValue()) {
- AllZeros = false;
- break;
- }
- if (AllZeros)
+ if (GEPLHS->hasAllZeroIndices())
return FoldGEPICmp(GEPRHS, GEPLHS->getOperand(0),
ICmpInst::getSwappedPredicate(Cond), I);
// If the other GEP has all zero indices, recurse.
- AllZeros = true;
- for (unsigned i = 1, e = GEPRHS->getNumOperands(); i != e; ++i)
- if (!isa<Constant>(GEPRHS->getOperand(i)) ||
- !cast<Constant>(GEPRHS->getOperand(i))->isNullValue()) {
- AllZeros = false;
- break;
- }
- if (AllZeros)
+ if (GEPRHS->hasAllZeroIndices())
return FoldGEPICmp(GEPLHS, GEPRHS->getOperand(0), Cond, I);
bool GEPsInBounds = GEPLHS->isInBounds() && GEPRHS->isInBounds();
// Only lower this if the icmp is the only user of the GEP or if we expect
// the result to fold to a constant!
- if (DL &&
- GEPsInBounds &&
- (isa<ConstantExpr>(GEPLHS) || GEPLHS->hasOneUse()) &&
+ if (GEPsInBounds && (isa<ConstantExpr>(GEPLHS) || GEPLHS->hasOneUse()) &&
(isa<ConstantExpr>(GEPRHS) || GEPRHS->hasOneUse())) {
// ((gep Ptr, OFFSET1) cmp (gep Ptr, OFFSET2) ---> (OFFSET1 cmp OFFSET2)
Value *L = EmitGEPOffset(GEPLHS);
return new ICmpInst(ICmpInst::getSignedPredicate(Cond), L, R);
}
}
- return 0;
+ return nullptr;
}
-/// FoldICmpAddOpCst - Fold "icmp pred (X+CI), X".
-Instruction *InstCombiner::FoldICmpAddOpCst(Instruction &ICI,
- Value *X, ConstantInt *CI,
- ICmpInst::Predicate Pred) {
- // If we have X+0, exit early (simplifying logic below) and let it get folded
- // elsewhere. icmp X+0, X -> icmp X, X
- if (CI->isZero()) {
- bool isTrue = ICmpInst::isTrueWhenEqual(Pred);
- return ReplaceInstUsesWith(ICI, ConstantInt::get(ICI.getType(), isTrue));
+Instruction *InstCombiner::FoldAllocaCmp(ICmpInst &ICI, AllocaInst *Alloca,
+ Value *Other) {
+ assert(ICI.isEquality() && "Cannot fold non-equality comparison.");
+
+ // It would be tempting to fold away comparisons between allocas and any
+ // pointer not based on that alloca (e.g. an argument). However, even
+ // though such pointers cannot alias, they can still compare equal.
+ //
+ // But LLVM doesn't specify where allocas get their memory, so if the alloca
+ // doesn't escape we can argue that it's impossible to guess its value, and we
+ // can therefore act as if any such guesses are wrong.
+ //
+ // The code below checks that the alloca doesn't escape, and that it's only
+ // used in a comparison once (the current instruction). The
+ // single-comparison-use condition ensures that we're trivially folding all
+ // comparisons against the alloca consistently, and avoids the risk of
+ // erroneously folding a comparison of the pointer with itself.
+
+ unsigned MaxIter = 32; // Break cycles and bound to constant-time.
+
+ SmallVector<Use *, 32> Worklist;
+ for (Use &U : Alloca->uses()) {
+ if (Worklist.size() >= MaxIter)
+ return nullptr;
+ Worklist.push_back(&U);
}
- // (X+4) == X -> false.
- if (Pred == ICmpInst::ICMP_EQ)
- return ReplaceInstUsesWith(ICI, Builder->getFalse());
+ unsigned NumCmps = 0;
+ while (!Worklist.empty()) {
+ assert(Worklist.size() <= MaxIter);
+ Use *U = Worklist.pop_back_val();
+ Value *V = U->getUser();
+ --MaxIter;
+
+ if (isa<BitCastInst>(V) || isa<GetElementPtrInst>(V) || isa<PHINode>(V) ||
+ isa<SelectInst>(V)) {
+ // Track the uses.
+ } else if (isa<LoadInst>(V)) {
+ // Loading from the pointer doesn't escape it.
+ continue;
+ } else if (auto *SI = dyn_cast<StoreInst>(V)) {
+ // Storing *to* the pointer is fine, but storing the pointer escapes it.
+ if (SI->getValueOperand() == U->get())
+ return nullptr;
+ continue;
+ } else if (isa<ICmpInst>(V)) {
+ if (NumCmps++)
+ return nullptr; // Found more than one cmp.
+ continue;
+ } else if (auto *Intrin = dyn_cast<IntrinsicInst>(V)) {
+ switch (Intrin->getIntrinsicID()) {
+ // These intrinsics don't escape or compare the pointer. Memset is safe
+ // because we don't allow ptrtoint. Memcpy and memmove are safe because
+ // we don't allow stores, so src cannot point to V.
+ case Intrinsic::lifetime_start: case Intrinsic::lifetime_end:
+ case Intrinsic::dbg_declare: case Intrinsic::dbg_value:
+ case Intrinsic::memcpy: case Intrinsic::memmove: case Intrinsic::memset:
+ continue;
+ default:
+ return nullptr;
+ }
+ } else {
+ return nullptr;
+ }
+ for (Use &U : V->uses()) {
+ if (Worklist.size() >= MaxIter)
+ return nullptr;
+ Worklist.push_back(&U);
+ }
+ }
- // (X+4) != X -> true.
- if (Pred == ICmpInst::ICMP_NE)
- return ReplaceInstUsesWith(ICI, Builder->getTrue());
+ Type *CmpTy = CmpInst::makeCmpResultType(Other->getType());
+ return ReplaceInstUsesWith(
+ ICI,
+ ConstantInt::get(CmpTy, !CmpInst::isTrueWhenEqual(ICI.getPredicate())));
+}
+/// FoldICmpAddOpCst - Fold "icmp pred (X+CI), X".
+Instruction *InstCombiner::FoldICmpAddOpCst(Instruction &ICI,
+ Value *X, ConstantInt *CI,
+ ICmpInst::Predicate Pred) {
// From this point on, we know that (X+C <= X) --> (X+C < X) because C != 0,
// so the values can never be equal. Similarly for all other "or equals"
// operators.
// if it finds it.
bool DivIsSigned = DivI->getOpcode() == Instruction::SDiv;
if (!ICI.isEquality() && DivIsSigned != ICI.isSigned())
- return 0;
+ return nullptr;
if (DivRHS->isZero())
- return 0; // The ProdOV computation fails on divide by zero.
+ return nullptr; // The ProdOV computation fails on divide by zero.
if (DivIsSigned && DivRHS->isAllOnesValue())
- return 0; // The overflow computation also screws up here
+ return nullptr; // The overflow computation also screws up here
if (DivRHS->isOne()) {
// This eliminates some funny cases with INT_MIN.
ICI.setOperand(0, DivI->getOperand(0)); // X/1 == X.
// overflow variable is set to 0 if it's corresponding bound variable is valid
// -1 if overflowed off the bottom end, or +1 if overflowed off the top end.
int LoOverflow = 0, HiOverflow = 0;
- Constant *LoBound = 0, *HiBound = 0;
+ Constant *LoBound = nullptr, *HiBound = nullptr;
if (!DivIsSigned) { // udiv
// e.g. X/5 op 3 --> [15, 20)
// to the same result value.
HiOverflow = AddWithOverflow(HiBound, LoBound, RangeSize, false);
}
-
} else if (DivRHS->getValue().isStrictlyPositive()) { // Divisor is > 0.
if (CmpRHSV == 0) { // (X / pos) op 0
// Can't overflow. e.g. X/2 op 0 --> [-1, 2)
HiBound = cast<ConstantInt>(ConstantExpr::getNeg(RangeSize));
if (HiBound == DivRHS) { // -INTMIN = INTMIN
HiOverflow = 1; // [INTMIN+1, overflow)
- HiBound = 0; // e.g. X/INTMIN = 0 --> X > INTMIN
+ HiBound = nullptr; // e.g. X/INTMIN = 0 --> X > INTMIN
}
} else if (CmpRHSV.isStrictlyPositive()) { // (X / neg) op pos
// e.g. X/-5 op 3 --> [-19, -14)
uint32_t TypeBits = CmpRHSV.getBitWidth();
uint32_t ShAmtVal = (uint32_t)ShAmt->getLimitedValue(TypeBits);
if (ShAmtVal >= TypeBits || ShAmtVal == 0)
- return 0;
+ return nullptr;
if (!ICI.isEquality()) {
// If we have an unsigned comparison and an ashr, we can't simplify this.
// Similarly for signed comparisons with lshr.
if (ICI.isSigned() != (Shr->getOpcode() == Instruction::AShr))
- return 0;
+ return nullptr;
// Otherwise, all lshr and most exact ashr's are equivalent to a udiv/sdiv
// by a power of 2. Since we already have logic to simplify these,
// transform to div and then simplify the resultant comparison.
if (Shr->getOpcode() == Instruction::AShr &&
(!Shr->isExact() || ShAmtVal == TypeBits - 1))
- return 0;
+ return nullptr;
// Revisit the shift (to delete it).
Worklist.Add(Shr);
// If the builder folded the binop, just return it.
BinaryOperator *TheDiv = dyn_cast<BinaryOperator>(Tmp);
- if (TheDiv == 0)
+ if (!TheDiv)
return &ICI;
// Otherwise, fold this div/compare.
return Res;
}
-
// If we are comparing against bits always shifted out, the
// comparison cannot succeed.
APInt Comp = CmpRHSV << ShAmtVal;
Mask, Shr->getName()+".mask");
return new ICmpInst(ICI.getPredicate(), And, ShiftedCmpRHS);
}
- return 0;
+ return nullptr;
}
+/// FoldICmpCstShrCst - Handle "(icmp eq/ne (ashr/lshr const2, A), const1)" ->
+/// (icmp eq/ne A, Log2(const2/const1)) ->
+/// (icmp eq/ne A, Log2(const2) - Log2(const1)).
+Instruction *InstCombiner::FoldICmpCstShrCst(ICmpInst &I, Value *Op, Value *A,
+ ConstantInt *CI1,
+ ConstantInt *CI2) {
+ assert(I.isEquality() && "Cannot fold icmp gt/lt");
+
+ auto getConstant = [&I, this](bool IsTrue) {
+ if (I.getPredicate() == I.ICMP_NE)
+ IsTrue = !IsTrue;
+ return ReplaceInstUsesWith(I, ConstantInt::get(I.getType(), IsTrue));
+ };
+
+ auto getICmp = [&I](CmpInst::Predicate Pred, Value *LHS, Value *RHS) {
+ if (I.getPredicate() == I.ICMP_NE)
+ Pred = CmpInst::getInversePredicate(Pred);
+ return new ICmpInst(Pred, LHS, RHS);
+ };
+
+ APInt AP1 = CI1->getValue();
+ APInt AP2 = CI2->getValue();
+
+ // Don't bother doing any work for cases which InstSimplify handles.
+ if (AP2 == 0)
+ return nullptr;
+ bool IsAShr = isa<AShrOperator>(Op);
+ if (IsAShr) {
+ if (AP2.isAllOnesValue())
+ return nullptr;
+ if (AP2.isNegative() != AP1.isNegative())
+ return nullptr;
+ if (AP2.sgt(AP1))
+ return nullptr;
+ }
+
+ if (!AP1)
+ // 'A' must be large enough to shift out the highest set bit.
+ return getICmp(I.ICMP_UGT, A,
+ ConstantInt::get(A->getType(), AP2.logBase2()));
+
+ if (AP1 == AP2)
+ return getICmp(I.ICMP_EQ, A, ConstantInt::getNullValue(A->getType()));
+
+ int Shift;
+ if (IsAShr && AP1.isNegative())
+ Shift = AP1.countLeadingOnes() - AP2.countLeadingOnes();
+ else
+ Shift = AP1.countLeadingZeros() - AP2.countLeadingZeros();
+
+ if (Shift > 0) {
+ if (IsAShr && AP1 == AP2.ashr(Shift)) {
+ // There are multiple solutions if we are comparing against -1 and the LHS
+ // of the ashr is not a power of two.
+ if (AP1.isAllOnesValue() && !AP2.isPowerOf2())
+ return getICmp(I.ICMP_UGE, A, ConstantInt::get(A->getType(), Shift));
+ return getICmp(I.ICMP_EQ, A, ConstantInt::get(A->getType(), Shift));
+ } else if (AP1 == AP2.lshr(Shift)) {
+ return getICmp(I.ICMP_EQ, A, ConstantInt::get(A->getType(), Shift));
+ }
+ }
+ // Shifting const2 will never be equal to const1.
+ return getConstant(false);
+}
+
+/// FoldICmpCstShlCst - Handle "(icmp eq/ne (shl const2, A), const1)" ->
+/// (icmp eq/ne A, TrailingZeros(const1) - TrailingZeros(const2)).
+Instruction *InstCombiner::FoldICmpCstShlCst(ICmpInst &I, Value *Op, Value *A,
+ ConstantInt *CI1,
+ ConstantInt *CI2) {
+ assert(I.isEquality() && "Cannot fold icmp gt/lt");
+
+ auto getConstant = [&I, this](bool IsTrue) {
+ if (I.getPredicate() == I.ICMP_NE)
+ IsTrue = !IsTrue;
+ return ReplaceInstUsesWith(I, ConstantInt::get(I.getType(), IsTrue));
+ };
+
+ auto getICmp = [&I](CmpInst::Predicate Pred, Value *LHS, Value *RHS) {
+ if (I.getPredicate() == I.ICMP_NE)
+ Pred = CmpInst::getInversePredicate(Pred);
+ return new ICmpInst(Pred, LHS, RHS);
+ };
+
+ APInt AP1 = CI1->getValue();
+ APInt AP2 = CI2->getValue();
+
+ // Don't bother doing any work for cases which InstSimplify handles.
+ if (AP2 == 0)
+ return nullptr;
+
+ unsigned AP2TrailingZeros = AP2.countTrailingZeros();
+
+ if (!AP1 && AP2TrailingZeros != 0)
+ return getICmp(I.ICMP_UGE, A,
+ ConstantInt::get(A->getType(), AP2.getBitWidth() - AP2TrailingZeros));
+
+ if (AP1 == AP2)
+ return getICmp(I.ICMP_EQ, A, ConstantInt::getNullValue(A->getType()));
+
+ // Get the distance between the lowest bits that are set.
+ int Shift = AP1.countTrailingZeros() - AP2TrailingZeros;
+
+ if (Shift > 0 && AP2.shl(Shift) == AP1)
+ return getICmp(I.ICMP_EQ, A, ConstantInt::get(A->getType(), Shift));
+
+ // Shifting const2 will never be equal to const1.
+ return getConstant(false);
+}
/// visitICmpInstWithInstAndIntCst - Handle "icmp (instr, intcst)".
///
switch (LHSI->getOpcode()) {
case Instruction::Trunc:
+ if (RHS->isOne() && RHSV.getBitWidth() > 1) {
+ // icmp slt trunc(signum(V)) 1 --> icmp slt V, 1
+ Value *V = nullptr;
+ if (ICI.getPredicate() == ICmpInst::ICMP_SLT &&
+ match(LHSI->getOperand(0), m_Signum(m_Value(V))))
+ return new ICmpInst(ICmpInst::ICMP_SLT, V,
+ ConstantInt::get(V->getType(), 1));
+ }
if (ICI.isEquality() && LHSI->hasOneUse()) {
// Simplify icmp eq (trunc x to i8), 42 -> icmp eq x, 42|highbits if all
// of the high bits truncated out of x are known.
unsigned DstBits = LHSI->getType()->getPrimitiveSizeInBits(),
SrcBits = LHSI->getOperand(0)->getType()->getPrimitiveSizeInBits();
APInt KnownZero(SrcBits, 0), KnownOne(SrcBits, 0);
- ComputeMaskedBits(LHSI->getOperand(0), KnownZero, KnownOne);
+ computeKnownBits(LHSI->getOperand(0), KnownZero, KnownOne, 0, &ICI);
// If all the high bits are known, we can do this xform.
if ((KnownZero|KnownOne).countLeadingOnes() >= SrcBits-DstBits) {
// access.
BinaryOperator *Shift = dyn_cast<BinaryOperator>(LHSI->getOperand(0));
if (Shift && !Shift->isShift())
- Shift = 0;
+ Shift = nullptr;
ConstantInt *ShAmt;
- ShAmt = Shift ? dyn_cast<ConstantInt>(Shift->getOperand(1)) : 0;
+ ShAmt = Shift ? dyn_cast<ConstantInt>(Shift->getOperand(1)) : nullptr;
// This seemingly simple opportunity to fold away a shift turns out to
// be rather complicated. See PR17827
return &ICI;
}
+ // (icmp pred (and (or (lshr X, Y), X), 1), 0) -->
+ // (icmp pred (and X, (or (shl 1, Y), 1), 0))
+ //
+ // iff pred isn't signed
+ {
+ Value *X, *Y, *LShr;
+ if (!ICI.isSigned() && RHSV == 0) {
+ if (match(LHSI->getOperand(1), m_One())) {
+ Constant *One = cast<Constant>(LHSI->getOperand(1));
+ Value *Or = LHSI->getOperand(0);
+ if (match(Or, m_Or(m_Value(LShr), m_Value(X))) &&
+ match(LShr, m_LShr(m_Specific(X), m_Value(Y)))) {
+ unsigned UsesRemoved = 0;
+ if (LHSI->hasOneUse())
+ ++UsesRemoved;
+ if (Or->hasOneUse())
+ ++UsesRemoved;
+ if (LShr->hasOneUse())
+ ++UsesRemoved;
+ Value *NewOr = nullptr;
+ // Compute X & ((1 << Y) | 1)
+ if (auto *C = dyn_cast<Constant>(Y)) {
+ if (UsesRemoved >= 1)
+ NewOr =
+ ConstantExpr::getOr(ConstantExpr::getNUWShl(One, C), One);
+ } else {
+ if (UsesRemoved >= 3)
+ NewOr = Builder->CreateOr(Builder->CreateShl(One, Y,
+ LShr->getName(),
+ /*HasNUW=*/true),
+ One, Or->getName());
+ }
+ if (NewOr) {
+ Value *NewAnd = Builder->CreateAnd(X, NewOr, LHSI->getName());
+ ICI.setOperand(0, NewAnd);
+ return &ICI;
+ }
+ }
+ }
+ }
+ }
+
// Replace ((X & AndCst) > RHSV) with ((X & AndCst) != 0), if any
// bit set in (X & AndCst) will produce a result greater than RHSV.
if (ICI.getPredicate() == ICmpInst::ICMP_UGT) {
ICI.getPredicate() == ICmpInst::ICMP_EQ ? ICmpInst::ICMP_UGT
: ICmpInst::ICMP_ULE,
LHSI->getOperand(0), SubOne(RHS));
+
+ // (icmp eq (and %A, C), 0) -> (icmp sgt (trunc %A), -1)
+ // iff C is a power of 2
+ if (ICI.isEquality() && LHSI->hasOneUse() && match(RHS, m_Zero())) {
+ if (auto *CI = dyn_cast<ConstantInt>(LHSI->getOperand(1))) {
+ const APInt &AI = CI->getValue();
+ int32_t ExactLogBase2 = AI.exactLogBase2();
+ if (ExactLogBase2 != -1 && DL.isLegalInteger(ExactLogBase2 + 1)) {
+ Type *NTy = IntegerType::get(ICI.getContext(), ExactLogBase2 + 1);
+ Value *Trunc = Builder->CreateTrunc(LHSI->getOperand(0), NTy);
+ return new ICmpInst(ICI.getPredicate() == ICmpInst::ICMP_EQ
+ ? ICmpInst::ICMP_SGE
+ : ICmpInst::ICMP_SLT,
+ Trunc, Constant::getNullValue(NTy));
+ }
+ }
+ }
break;
case Instruction::Or: {
+ if (RHS->isOne()) {
+ // icmp slt signum(V) 1 --> icmp slt V, 1
+ Value *V = nullptr;
+ if (ICI.getPredicate() == ICmpInst::ICMP_SLT &&
+ match(LHSI, m_Signum(m_Value(V))))
+ return new ICmpInst(ICmpInst::ICMP_SLT, V,
+ ConstantInt::get(V->getType(), 1));
+ }
+
if (!ICI.isEquality() || !RHS->isNullValue() || !LHSI->hasOneUse())
break;
Value *P, *Q;
unsigned RHSLog2 = RHSV.logBase2();
// (1 << X) >= 2147483648 -> X >= 31 -> X == 31
- // (1 << X) > 2147483648 -> X > 31 -> false
- // (1 << X) <= 2147483648 -> X <= 31 -> true
// (1 << X) < 2147483648 -> X < 31 -> X != 31
if (RHSLog2 == TypeBits-1) {
if (Pred == ICmpInst::ICMP_UGE)
Pred = ICmpInst::ICMP_EQ;
- else if (Pred == ICmpInst::ICMP_UGT)
- return ReplaceInstUsesWith(ICI, Builder->getFalse());
- else if (Pred == ICmpInst::ICMP_ULE)
- return ReplaceInstUsesWith(ICI, Builder->getTrue());
else if (Pred == ICmpInst::ICMP_ULT)
Pred = ICmpInst::ICMP_NE;
}
if (RHSVIsPowerOf2)
return new ICmpInst(
Pred, X, ConstantInt::get(RHS->getType(), RHSV.logBase2()));
-
- return ReplaceInstUsesWith(
- ICI, Pred == ICmpInst::ICMP_EQ ? Builder->getFalse()
- : Builder->getTrue());
}
}
break;
}
}
}
- return 0;
+ return nullptr;
}
/// visitICmpInstWithCastAndCast - Handle icmp (cast x to y), (cast/cst).
// Turn icmp (ptrtoint x), (ptrtoint/c) into a compare of the input if the
// integer type is the same size as the pointer type.
- if (DL && LHSCI->getOpcode() == Instruction::PtrToInt &&
- DL->getPointerTypeSizeInBits(SrcTy) == DestTy->getIntegerBitWidth()) {
- Value *RHSOp = 0;
- if (Constant *RHSC = dyn_cast<Constant>(ICI.getOperand(1))) {
+ if (LHSCI->getOpcode() == Instruction::PtrToInt &&
+ DL.getPointerTypeSizeInBits(SrcTy) == DestTy->getIntegerBitWidth()) {
+ Value *RHSOp = nullptr;
+ if (PtrToIntOperator *RHSC = dyn_cast<PtrToIntOperator>(ICI.getOperand(1))) {
+ Value *RHSCIOp = RHSC->getOperand(0);
+ if (RHSCIOp->getType()->getPointerAddressSpace() ==
+ LHSCIOp->getType()->getPointerAddressSpace()) {
+ RHSOp = RHSC->getOperand(0);
+ // If the pointer types don't match, insert a bitcast.
+ if (LHSCIOp->getType() != RHSOp->getType())
+ RHSOp = Builder->CreateBitCast(RHSOp, LHSCIOp->getType());
+ }
+ } else if (Constant *RHSC = dyn_cast<Constant>(ICI.getOperand(1)))
RHSOp = ConstantExpr::getIntToPtr(RHSC, SrcTy);
- } else if (PtrToIntInst *RHSC = dyn_cast<PtrToIntInst>(ICI.getOperand(1))) {
- RHSOp = RHSC->getOperand(0);
- // If the pointer types don't match, insert a bitcast.
- if (LHSCIOp->getType() != RHSOp->getType())
- RHSOp = Builder->CreateBitCast(RHSOp, LHSCIOp->getType());
- }
if (RHSOp)
return new ICmpInst(ICI.getPredicate(), LHSCIOp, RHSOp);
// Enforce this.
if (LHSCI->getOpcode() != Instruction::ZExt &&
LHSCI->getOpcode() != Instruction::SExt)
- return 0;
+ return nullptr;
bool isSignedExt = LHSCI->getOpcode() == Instruction::SExt;
bool isSignedCmp = ICI.isSigned();
// Not an extension from the same type?
RHSCIOp = CI->getOperand(0);
if (RHSCIOp->getType() != LHSCIOp->getType())
- return 0;
+ return nullptr;
// If the signedness of the two casts doesn't agree (i.e. one is a sext
// and the other is a zext), then we can't handle this.
if (CI->getOpcode() != LHSCI->getOpcode())
- return 0;
+ return nullptr;
// Deal with equality cases early.
if (ICI.isEquality())
// If we aren't dealing with a constant on the RHS, exit early
ConstantInt *CI = dyn_cast<ConstantInt>(ICI.getOperand(1));
if (!CI)
- return 0;
+ return nullptr;
// Compute the constant that would happen if we truncated to SrcTy then
// reextended to DestTy.
// by SimplifyICmpInst, so only deal with the tricky case.
if (isSignedCmp || !isSignedExt)
- return 0;
+ return nullptr;
// Evaluate the comparison for LT (we invert for GT below). LE and GE cases
// should have been folded away previously and not enter in here.
// In order to eliminate the add-with-constant, the compare can be its only
// use.
Instruction *AddWithCst = cast<Instruction>(I.getOperand(0));
- if (!AddWithCst->hasOneUse()) return 0;
+ if (!AddWithCst->hasOneUse()) return nullptr;
// If CI2 is 2^7, 2^15, 2^31, then it might be an sadd.with.overflow.
- if (!CI2->getValue().isPowerOf2()) return 0;
+ if (!CI2->getValue().isPowerOf2()) return nullptr;
unsigned NewWidth = CI2->getValue().countTrailingZeros();
- if (NewWidth != 7 && NewWidth != 15 && NewWidth != 31) return 0;
+ if (NewWidth != 7 && NewWidth != 15 && NewWidth != 31) return nullptr;
// The width of the new add formed is 1 more than the bias.
++NewWidth;
// Check to see that CI1 is an all-ones value with NewWidth bits.
if (CI1->getBitWidth() == NewWidth ||
CI1->getValue() != APInt::getLowBitsSet(CI1->getBitWidth(), NewWidth))
- return 0;
+ return nullptr;
// This is only really a signed overflow check if the inputs have been
// sign-extended; check for that condition. For example, if CI2 is 2^31 and
// the operands of the add are 64 bits wide, we need at least 33 sign bits.
unsigned NeededSignBits = CI1->getBitWidth() - NewWidth + 1;
- if (IC.ComputeNumSignBits(A) < NeededSignBits ||
- IC.ComputeNumSignBits(B) < NeededSignBits)
- return 0;
+ if (IC.ComputeNumSignBits(A, 0, &I) < NeededSignBits ||
+ IC.ComputeNumSignBits(B, 0, &I) < NeededSignBits)
+ return nullptr;
// In order to replace the original add with a narrower
// llvm.sadd.with.overflow, the only uses allowed are the add-with-constant
// and truncates that discard the high bits of the add. Verify that this is
// the case.
Instruction *OrigAdd = cast<Instruction>(AddWithCst->getOperand(0));
- for (Value::use_iterator UI = OrigAdd->use_begin(), E = OrigAdd->use_end();
- UI != E; ++UI) {
- if (*UI == AddWithCst) continue;
+ for (User *U : OrigAdd->users()) {
+ if (U == AddWithCst) continue;
// Only accept truncates for now. We would really like a nice recursive
// predicate like SimplifyDemandedBits, but which goes downwards the use-def
// chain to see which bits of a value are actually demanded. If the
// original add had another add which was then immediately truncated, we
// could still do the transformation.
- TruncInst *TI = dyn_cast<TruncInst>(*UI);
- if (TI == 0 ||
- TI->getType()->getPrimitiveSizeInBits() > NewWidth) return 0;
+ TruncInst *TI = dyn_cast<TruncInst>(U);
+ if (!TI || TI->getType()->getPrimitiveSizeInBits() > NewWidth)
+ return nullptr;
}
// If the pattern matches, truncate the inputs to the narrower type and
Value *TruncA = Builder->CreateTrunc(A, NewType, A->getName()+".trunc");
Value *TruncB = Builder->CreateTrunc(B, NewType, B->getName()+".trunc");
- CallInst *Call = Builder->CreateCall2(F, TruncA, TruncB, "sadd");
+ CallInst *Call = Builder->CreateCall(F, {TruncA, TruncB}, "sadd");
Value *Add = Builder->CreateExtractValue(Call, 0, "sadd.result");
Value *ZExt = Builder->CreateZExt(Add, OrigAdd->getType());
return ExtractValueInst::Create(Call, 1, "sadd.overflow");
}
-static Instruction *ProcessUAddIdiom(Instruction &I, Value *OrigAddV,
- InstCombiner &IC) {
+bool InstCombiner::OptimizeOverflowCheck(OverflowCheckFlavor OCF, Value *LHS,
+ Value *RHS, Instruction &OrigI,
+ Value *&Result, Constant *&Overflow) {
+ if (OrigI.isCommutative() && isa<Constant>(LHS) && !isa<Constant>(RHS))
+ std::swap(LHS, RHS);
+
+ auto SetResult = [&](Value *OpResult, Constant *OverflowVal, bool ReuseName) {
+ Result = OpResult;
+ Overflow = OverflowVal;
+ if (ReuseName)
+ Result->takeName(&OrigI);
+ return true;
+ };
+
+ // If the overflow check was an add followed by a compare, the insertion point
+ // may be pointing to the compare. We want to insert the new instructions
+ // before the add in case there are uses of the add between the add and the
+ // compare.
+ Builder->SetInsertPoint(&OrigI);
+
+ switch (OCF) {
+ case OCF_INVALID:
+ llvm_unreachable("bad overflow check kind!");
+
+ case OCF_UNSIGNED_ADD: {
+ OverflowResult OR = computeOverflowForUnsignedAdd(LHS, RHS, &OrigI);
+ if (OR == OverflowResult::NeverOverflows)
+ return SetResult(Builder->CreateNUWAdd(LHS, RHS), Builder->getFalse(),
+ true);
+
+ if (OR == OverflowResult::AlwaysOverflows)
+ return SetResult(Builder->CreateAdd(LHS, RHS), Builder->getTrue(), true);
+ }
+ // FALL THROUGH uadd into sadd
+ case OCF_SIGNED_ADD: {
+ // X + 0 -> {X, false}
+ if (match(RHS, m_Zero()))
+ return SetResult(LHS, Builder->getFalse(), false);
+
+ // We can strength reduce this signed add into a regular add if we can prove
+ // that it will never overflow.
+ if (OCF == OCF_SIGNED_ADD)
+ if (WillNotOverflowSignedAdd(LHS, RHS, OrigI))
+ return SetResult(Builder->CreateNSWAdd(LHS, RHS), Builder->getFalse(),
+ true);
+ break;
+ }
+
+ case OCF_UNSIGNED_SUB:
+ case OCF_SIGNED_SUB: {
+ // X - 0 -> {X, false}
+ if (match(RHS, m_Zero()))
+ return SetResult(LHS, Builder->getFalse(), false);
+
+ if (OCF == OCF_SIGNED_SUB) {
+ if (WillNotOverflowSignedSub(LHS, RHS, OrigI))
+ return SetResult(Builder->CreateNSWSub(LHS, RHS), Builder->getFalse(),
+ true);
+ } else {
+ if (WillNotOverflowUnsignedSub(LHS, RHS, OrigI))
+ return SetResult(Builder->CreateNUWSub(LHS, RHS), Builder->getFalse(),
+ true);
+ }
+ break;
+ }
+
+ case OCF_UNSIGNED_MUL: {
+ OverflowResult OR = computeOverflowForUnsignedMul(LHS, RHS, &OrigI);
+ if (OR == OverflowResult::NeverOverflows)
+ return SetResult(Builder->CreateNUWMul(LHS, RHS), Builder->getFalse(),
+ true);
+ if (OR == OverflowResult::AlwaysOverflows)
+ return SetResult(Builder->CreateMul(LHS, RHS), Builder->getTrue(), true);
+ } // FALL THROUGH
+ case OCF_SIGNED_MUL:
+ // X * undef -> undef
+ if (isa<UndefValue>(RHS))
+ return SetResult(RHS, UndefValue::get(Builder->getInt1Ty()), false);
+
+ // X * 0 -> {0, false}
+ if (match(RHS, m_Zero()))
+ return SetResult(RHS, Builder->getFalse(), false);
+
+ // X * 1 -> {X, false}
+ if (match(RHS, m_One()))
+ return SetResult(LHS, Builder->getFalse(), false);
+
+ if (OCF == OCF_SIGNED_MUL)
+ if (WillNotOverflowSignedMul(LHS, RHS, OrigI))
+ return SetResult(Builder->CreateNSWMul(LHS, RHS), Builder->getFalse(),
+ true);
+ break;
+ }
+
+ return false;
+}
+
+/// \brief Recognize and process idiom involving test for multiplication
+/// overflow.
+///
+/// The caller has matched a pattern of the form:
+/// I = cmp u (mul(zext A, zext B), V
+/// The function checks if this is a test for overflow and if so replaces
+/// multiplication with call to 'mul.with.overflow' intrinsic.
+///
+/// \param I Compare instruction.
+/// \param MulVal Result of 'mult' instruction. It is one of the arguments of
+/// the compare instruction. Must be of integer type.
+/// \param OtherVal The other argument of compare instruction.
+/// \returns Instruction which must replace the compare instruction, NULL if no
+/// replacement required.
+static Instruction *ProcessUMulZExtIdiom(ICmpInst &I, Value *MulVal,
+ Value *OtherVal, InstCombiner &IC) {
// Don't bother doing this transformation for pointers, don't do it for
// vectors.
- if (!isa<IntegerType>(OrigAddV->getType())) return 0;
+ if (!isa<IntegerType>(MulVal->getType()))
+ return nullptr;
+
+ assert(I.getOperand(0) == MulVal || I.getOperand(1) == MulVal);
+ assert(I.getOperand(0) == OtherVal || I.getOperand(1) == OtherVal);
+ auto *MulInstr = dyn_cast<Instruction>(MulVal);
+ if (!MulInstr)
+ return nullptr;
+ assert(MulInstr->getOpcode() == Instruction::Mul);
+
+ auto *LHS = cast<ZExtOperator>(MulInstr->getOperand(0)),
+ *RHS = cast<ZExtOperator>(MulInstr->getOperand(1));
+ assert(LHS->getOpcode() == Instruction::ZExt);
+ assert(RHS->getOpcode() == Instruction::ZExt);
+ Value *A = LHS->getOperand(0), *B = RHS->getOperand(0);
+
+ // Calculate type and width of the result produced by mul.with.overflow.
+ Type *TyA = A->getType(), *TyB = B->getType();
+ unsigned WidthA = TyA->getPrimitiveSizeInBits(),
+ WidthB = TyB->getPrimitiveSizeInBits();
+ unsigned MulWidth;
+ Type *MulType;
+ if (WidthB > WidthA) {
+ MulWidth = WidthB;
+ MulType = TyB;
+ } else {
+ MulWidth = WidthA;
+ MulType = TyA;
+ }
+
+ // In order to replace the original mul with a narrower mul.with.overflow,
+ // all uses must ignore upper bits of the product. The number of used low
+ // bits must be not greater than the width of mul.with.overflow.
+ if (MulVal->hasNUsesOrMore(2))
+ for (User *U : MulVal->users()) {
+ if (U == &I)
+ continue;
+ if (TruncInst *TI = dyn_cast<TruncInst>(U)) {
+ // Check if truncation ignores bits above MulWidth.
+ unsigned TruncWidth = TI->getType()->getPrimitiveSizeInBits();
+ if (TruncWidth > MulWidth)
+ return nullptr;
+ } else if (BinaryOperator *BO = dyn_cast<BinaryOperator>(U)) {
+ // Check if AND ignores bits above MulWidth.
+ if (BO->getOpcode() != Instruction::And)
+ return nullptr;
+ if (ConstantInt *CI = dyn_cast<ConstantInt>(BO->getOperand(1))) {
+ const APInt &CVal = CI->getValue();
+ if (CVal.getBitWidth() - CVal.countLeadingZeros() > MulWidth)
+ return nullptr;
+ }
+ } else {
+ // Other uses prohibit this transformation.
+ return nullptr;
+ }
+ }
- // If the add is a constant expr, then we don't bother transforming it.
- Instruction *OrigAdd = dyn_cast<Instruction>(OrigAddV);
- if (OrigAdd == 0) return 0;
+ // Recognize patterns
+ switch (I.getPredicate()) {
+ case ICmpInst::ICMP_EQ:
+ case ICmpInst::ICMP_NE:
+ // Recognize pattern:
+ // mulval = mul(zext A, zext B)
+ // cmp eq/neq mulval, zext trunc mulval
+ if (ZExtInst *Zext = dyn_cast<ZExtInst>(OtherVal))
+ if (Zext->hasOneUse()) {
+ Value *ZextArg = Zext->getOperand(0);
+ if (TruncInst *Trunc = dyn_cast<TruncInst>(ZextArg))
+ if (Trunc->getType()->getPrimitiveSizeInBits() == MulWidth)
+ break; //Recognized
+ }
- Value *LHS = OrigAdd->getOperand(0), *RHS = OrigAdd->getOperand(1);
+ // Recognize pattern:
+ // mulval = mul(zext A, zext B)
+ // cmp eq/neq mulval, and(mulval, mask), mask selects low MulWidth bits.
+ ConstantInt *CI;
+ Value *ValToMask;
+ if (match(OtherVal, m_And(m_Value(ValToMask), m_ConstantInt(CI)))) {
+ if (ValToMask != MulVal)
+ return nullptr;
+ const APInt &CVal = CI->getValue() + 1;
+ if (CVal.isPowerOf2()) {
+ unsigned MaskWidth = CVal.logBase2();
+ if (MaskWidth == MulWidth)
+ break; // Recognized
+ }
+ }
+ return nullptr;
- // Put the new code above the original add, in case there are any uses of the
- // add between the add and the compare.
- InstCombiner::BuilderTy *Builder = IC.Builder;
- Builder->SetInsertPoint(OrigAdd);
+ case ICmpInst::ICMP_UGT:
+ // Recognize pattern:
+ // mulval = mul(zext A, zext B)
+ // cmp ugt mulval, max
+ if (ConstantInt *CI = dyn_cast<ConstantInt>(OtherVal)) {
+ APInt MaxVal = APInt::getMaxValue(MulWidth);
+ MaxVal = MaxVal.zext(CI->getBitWidth());
+ if (MaxVal.eq(CI->getValue()))
+ break; // Recognized
+ }
+ return nullptr;
+ case ICmpInst::ICMP_UGE:
+ // Recognize pattern:
+ // mulval = mul(zext A, zext B)
+ // cmp uge mulval, max+1
+ if (ConstantInt *CI = dyn_cast<ConstantInt>(OtherVal)) {
+ APInt MaxVal = APInt::getOneBitSet(CI->getBitWidth(), MulWidth);
+ if (MaxVal.eq(CI->getValue()))
+ break; // Recognized
+ }
+ return nullptr;
+
+ case ICmpInst::ICMP_ULE:
+ // Recognize pattern:
+ // mulval = mul(zext A, zext B)
+ // cmp ule mulval, max
+ if (ConstantInt *CI = dyn_cast<ConstantInt>(OtherVal)) {
+ APInt MaxVal = APInt::getMaxValue(MulWidth);
+ MaxVal = MaxVal.zext(CI->getBitWidth());
+ if (MaxVal.eq(CI->getValue()))
+ break; // Recognized
+ }
+ return nullptr;
+
+ case ICmpInst::ICMP_ULT:
+ // Recognize pattern:
+ // mulval = mul(zext A, zext B)
+ // cmp ule mulval, max + 1
+ if (ConstantInt *CI = dyn_cast<ConstantInt>(OtherVal)) {
+ APInt MaxVal = APInt::getOneBitSet(CI->getBitWidth(), MulWidth);
+ if (MaxVal.eq(CI->getValue()))
+ break; // Recognized
+ }
+ return nullptr;
+
+ default:
+ return nullptr;
+ }
+
+ InstCombiner::BuilderTy *Builder = IC.Builder;
+ Builder->SetInsertPoint(MulInstr);
Module *M = I.getParent()->getParent()->getParent();
- Type *Ty = LHS->getType();
- Value *F = Intrinsic::getDeclaration(M, Intrinsic::uadd_with_overflow, Ty);
- CallInst *Call = Builder->CreateCall2(F, LHS, RHS, "uadd");
- Value *Add = Builder->CreateExtractValue(Call, 0);
- IC.ReplaceInstUsesWith(*OrigAdd, Add);
+ // Replace: mul(zext A, zext B) --> mul.with.overflow(A, B)
+ Value *MulA = A, *MulB = B;
+ if (WidthA < MulWidth)
+ MulA = Builder->CreateZExt(A, MulType);
+ if (WidthB < MulWidth)
+ MulB = Builder->CreateZExt(B, MulType);
+ Value *F =
+ Intrinsic::getDeclaration(M, Intrinsic::umul_with_overflow, MulType);
+ CallInst *Call = Builder->CreateCall(F, {MulA, MulB}, "umul");
+ IC.Worklist.Add(MulInstr);
+
+ // If there are uses of mul result other than the comparison, we know that
+ // they are truncation or binary AND. Change them to use result of
+ // mul.with.overflow and adjust properly mask/size.
+ if (MulVal->hasNUsesOrMore(2)) {
+ Value *Mul = Builder->CreateExtractValue(Call, 0, "umul.value");
+ for (User *U : MulVal->users()) {
+ if (U == &I || U == OtherVal)
+ continue;
+ if (TruncInst *TI = dyn_cast<TruncInst>(U)) {
+ if (TI->getType()->getPrimitiveSizeInBits() == MulWidth)
+ IC.ReplaceInstUsesWith(*TI, Mul);
+ else
+ TI->setOperand(0, Mul);
+ } else if (BinaryOperator *BO = dyn_cast<BinaryOperator>(U)) {
+ assert(BO->getOpcode() == Instruction::And);
+ // Replace (mul & mask) --> zext (mul.with.overflow & short_mask)
+ ConstantInt *CI = cast<ConstantInt>(BO->getOperand(1));
+ APInt ShortMask = CI->getValue().trunc(MulWidth);
+ Value *ShortAnd = Builder->CreateAnd(Mul, ShortMask);
+ Instruction *Zext =
+ cast<Instruction>(Builder->CreateZExt(ShortAnd, BO->getType()));
+ IC.Worklist.Add(Zext);
+ IC.ReplaceInstUsesWith(*BO, Zext);
+ } else {
+ llvm_unreachable("Unexpected Binary operation");
+ }
+ IC.Worklist.Add(cast<Instruction>(U));
+ }
+ }
+ if (isa<Instruction>(OtherVal))
+ IC.Worklist.Add(cast<Instruction>(OtherVal));
- // The original icmp gets replaced with the overflow value.
- return ExtractValueInst::Create(Call, 1, "uadd.overflow");
+ // The original icmp gets replaced with the overflow value, maybe inverted
+ // depending on predicate.
+ bool Inverse = false;
+ switch (I.getPredicate()) {
+ case ICmpInst::ICMP_NE:
+ break;
+ case ICmpInst::ICMP_EQ:
+ Inverse = true;
+ break;
+ case ICmpInst::ICMP_UGT:
+ case ICmpInst::ICMP_UGE:
+ if (I.getOperand(0) == MulVal)
+ break;
+ Inverse = true;
+ break;
+ case ICmpInst::ICMP_ULT:
+ case ICmpInst::ICMP_ULE:
+ if (I.getOperand(1) == MulVal)
+ break;
+ Inverse = true;
+ break;
+ default:
+ llvm_unreachable("Unexpected predicate");
+ }
+ if (Inverse) {
+ Value *Res = Builder->CreateExtractValue(Call, 1);
+ return BinaryOperator::CreateNot(Res);
+ }
+
+ return ExtractValueInst::Create(Call, 1);
}
// DemandedBitsLHSMask - When performing a comparison against a constant,
default:
return APInt::getAllOnesValue(BitWidth);
}
-
}
/// \brief Check if the order of \p Op0 and \p Op1 as operand in an ICmpInst
// At the end, if the benefit is greater than 0, Op0 should come second to
// expose more CSE opportunities.
int GlobalSwapBenefits = 0;
- for (Value::const_use_iterator UI = Op0->use_begin(), UIEnd = Op0->use_end(); UI != UIEnd; ++UI) {
- const BinaryOperator *BinOp = dyn_cast<BinaryOperator>(*UI);
+ for (const User *U : Op0->users()) {
+ const BinaryOperator *BinOp = dyn_cast<BinaryOperator>(U);
if (!BinOp || BinOp->getOpcode() != Instruction::Sub)
continue;
// If Op0 is the first argument, this is not beneficial to swap the
return GlobalSwapBenefits > 0;
}
+/// \brief Check that one use is in the same block as the definition and all
+/// other uses are in blocks dominated by a given block
+///
+/// \param DI Definition
+/// \param UI Use
+/// \param DB Block that must dominate all uses of \p DI outside
+/// the parent block
+/// \return true when \p UI is the only use of \p DI in the parent block
+/// and all other uses of \p DI are in blocks dominated by \p DB.
+///
+bool InstCombiner::dominatesAllUses(const Instruction *DI,
+ const Instruction *UI,
+ const BasicBlock *DB) const {
+ assert(DI && UI && "Instruction not defined\n");
+ // ignore incomplete definitions
+ if (!DI->getParent())
+ return false;
+ // DI and UI must be in the same block
+ if (DI->getParent() != UI->getParent())
+ return false;
+ // Protect from self-referencing blocks
+ if (DI->getParent() == DB)
+ return false;
+ // DominatorTree available?
+ if (!DT)
+ return false;
+ for (const User *U : DI->users()) {
+ auto *Usr = cast<Instruction>(U);
+ if (Usr != UI && !DT->dominates(DB, Usr->getParent()))
+ return false;
+ }
+ return true;
+}
+
+///
+/// true when the instruction sequence within a block is select-cmp-br.
+///
+static bool isChainSelectCmpBranch(const SelectInst *SI) {
+ const BasicBlock *BB = SI->getParent();
+ if (!BB)
+ return false;
+ auto *BI = dyn_cast_or_null<BranchInst>(BB->getTerminator());
+ if (!BI || BI->getNumSuccessors() != 2)
+ return false;
+ auto *IC = dyn_cast<ICmpInst>(BI->getCondition());
+ if (!IC || (IC->getOperand(0) != SI && IC->getOperand(1) != SI))
+ return false;
+ return true;
+}
+
+///
+/// \brief True when a select result is replaced by one of its operands
+/// in select-icmp sequence. This will eventually result in the elimination
+/// of the select.
+///
+/// \param SI Select instruction
+/// \param Icmp Compare instruction
+/// \param SIOpd Operand that replaces the select
+///
+/// Notes:
+/// - The replacement is global and requires dominator information
+/// - The caller is responsible for the actual replacement
+///
+/// Example:
+///
+/// entry:
+/// %4 = select i1 %3, %C* %0, %C* null
+/// %5 = icmp eq %C* %4, null
+/// br i1 %5, label %9, label %7
+/// ...
+/// ; <label>:7 ; preds = %entry
+/// %8 = getelementptr inbounds %C* %4, i64 0, i32 0
+/// ...
+///
+/// can be transformed to
+///
+/// %5 = icmp eq %C* %0, null
+/// %6 = select i1 %3, i1 %5, i1 true
+/// br i1 %6, label %9, label %7
+/// ...
+/// ; <label>:7 ; preds = %entry
+/// %8 = getelementptr inbounds %C* %0, i64 0, i32 0 // replace by %0!
+///
+/// Similar when the first operand of the select is a constant or/and
+/// the compare is for not equal rather than equal.
+///
+/// NOTE: The function is only called when the select and compare constants
+/// are equal, the optimization can work only for EQ predicates. This is not a
+/// major restriction since a NE compare should be 'normalized' to an equal
+/// compare, which usually happens in the combiner and test case
+/// select-cmp-br.ll
+/// checks for it.
+bool InstCombiner::replacedSelectWithOperand(SelectInst *SI,
+ const ICmpInst *Icmp,
+ const unsigned SIOpd) {
+ assert((SIOpd == 1 || SIOpd == 2) && "Invalid select operand!");
+ if (isChainSelectCmpBranch(SI) && Icmp->getPredicate() == ICmpInst::ICMP_EQ) {
+ BasicBlock *Succ = SI->getParent()->getTerminator()->getSuccessor(1);
+ // The check for the unique predecessor is not the best that can be
+ // done. But it protects efficiently against cases like when SI's
+ // home block has two successors, Succ and Succ1, and Succ1 predecessor
+ // of Succ. Then SI can't be replaced by SIOpd because the use that gets
+ // replaced can be reached on either path. So the uniqueness check
+ // guarantees that the path all uses of SI (outside SI's parent) are on
+ // is disjoint from all other paths out of SI. But that information
+ // is more expensive to compute, and the trade-off here is in favor
+ // of compile-time.
+ if (Succ->getUniquePredecessor() && dominatesAllUses(SI, Icmp, Succ)) {
+ NumSel++;
+ SI->replaceUsesOutsideBlock(SI->getOperand(SIOpd), SI->getParent());
+ return true;
+ }
+ }
+ return false;
+}
+
Instruction *InstCombiner::visitICmpInst(ICmpInst &I) {
bool Changed = false;
Value *Op0 = I.getOperand(0), *Op1 = I.getOperand(1);
Changed = true;
}
- if (Value *V = SimplifyICmpInst(I.getPredicate(), Op0, Op1, DL))
+ if (Value *V =
+ SimplifyICmpInst(I.getPredicate(), Op0, Op1, DL, TLI, DT, AC, &I))
return ReplaceInstUsesWith(I, V);
// comparing -val or val with non-zero is the same as just comparing val
unsigned BitWidth = 0;
if (Ty->isIntOrIntVectorTy())
BitWidth = Ty->getScalarSizeInBits();
- else if (DL) // Pointers require DL info to get their size.
- BitWidth = DL->getTypeSizeInBits(Ty->getScalarType());
+ else // Get pointer size.
+ BitWidth = DL.getTypeSizeInBits(Ty->getScalarType());
bool isSignBit = false;
// See if we are doing a comparison with a constant.
if (ConstantInt *CI = dyn_cast<ConstantInt>(Op1)) {
- Value *A = 0, *B = 0;
+ Value *A = nullptr, *B = nullptr;
// Match the following pattern, which is a common idiom when writing
// overflow-safe integer arithmetic function. The source performs an
return Res;
}
- // (icmp ne/eq (sub A B) 0) -> (icmp ne/eq A, B)
- if (I.isEquality() && CI->isZero() &&
- match(Op0, m_Sub(m_Value(A), m_Value(B)))) {
- // (icmp cond A B) if cond is equality
- return new ICmpInst(I.getPredicate(), A, B);
+ // The following transforms are only 'worth it' if the only user of the
+ // subtraction is the icmp.
+ if (Op0->hasOneUse()) {
+ // (icmp ne/eq (sub A B) 0) -> (icmp ne/eq A, B)
+ if (I.isEquality() && CI->isZero() &&
+ match(Op0, m_Sub(m_Value(A), m_Value(B))))
+ return new ICmpInst(I.getPredicate(), A, B);
+
+ // (icmp sgt (sub nsw A B), -1) -> (icmp sge A, B)
+ if (I.getPredicate() == ICmpInst::ICMP_SGT && CI->isAllOnesValue() &&
+ match(Op0, m_NSWSub(m_Value(A), m_Value(B))))
+ return new ICmpInst(ICmpInst::ICMP_SGE, A, B);
+
+ // (icmp sgt (sub nsw A B), 0) -> (icmp sgt A, B)
+ if (I.getPredicate() == ICmpInst::ICMP_SGT && CI->isZero() &&
+ match(Op0, m_NSWSub(m_Value(A), m_Value(B))))
+ return new ICmpInst(ICmpInst::ICMP_SGT, A, B);
+
+ // (icmp slt (sub nsw A B), 0) -> (icmp slt A, B)
+ if (I.getPredicate() == ICmpInst::ICMP_SLT && CI->isZero() &&
+ match(Op0, m_NSWSub(m_Value(A), m_Value(B))))
+ return new ICmpInst(ICmpInst::ICMP_SLT, A, B);
+
+ // (icmp slt (sub nsw A B), 1) -> (icmp sle A, B)
+ if (I.getPredicate() == ICmpInst::ICMP_SLT && CI->isOne() &&
+ match(Op0, m_NSWSub(m_Value(A), m_Value(B))))
+ return new ICmpInst(ICmpInst::ICMP_SLE, A, B);
}
// If we have an icmp le or icmp ge instruction, turn it into the
Builder->getInt(CI->getValue()-1));
}
+ if (I.isEquality()) {
+ ConstantInt *CI2;
+ if (match(Op0, m_AShr(m_ConstantInt(CI2), m_Value(A))) ||
+ match(Op0, m_LShr(m_ConstantInt(CI2), m_Value(A)))) {
+ // (icmp eq/ne (ashr/lshr const2, A), const1)
+ if (Instruction *Inst = FoldICmpCstShrCst(I, Op0, A, CI, CI2))
+ return Inst;
+ }
+ if (match(Op0, m_Shl(m_ConstantInt(CI2), m_Value(A)))) {
+ // (icmp eq/ne (shl const2, A), const1)
+ if (Instruction *Inst = FoldICmpCstShlCst(I, Op0, A, CI, CI2))
+ return Inst;
+ }
+ }
+
// If this comparison is a normal comparison, it demands all
// bits, if it is a sign bit comparison, it only demands the sign bit.
bool UnusedBit;
Op0KnownZero, Op0KnownOne, 0))
return &I;
if (SimplifyDemandedBits(I.getOperandUse(1),
- APInt::getAllOnesValue(BitWidth),
- Op1KnownZero, Op1KnownOne, 0))
+ APInt::getAllOnesValue(BitWidth), Op1KnownZero,
+ Op1KnownOne, 0))
return &I;
// Given the known and unknown bits, compute a range that the LHS could be
// bit is set. If the comparison is against zero, then this is a check
// to see if *that* bit is set.
APInt Op0KnownZeroInverted = ~Op0KnownZero;
- if (~Op1KnownZero == 0 && Op0KnownZeroInverted.isPowerOf2()) {
+ if (~Op1KnownZero == 0) {
// If the LHS is an AND with the same constant, look through it.
- Value *LHS = 0;
- ConstantInt *LHSC = 0;
+ Value *LHS = nullptr;
+ ConstantInt *LHSC = nullptr;
if (!match(Op0, m_And(m_Value(LHS), m_ConstantInt(LHSC))) ||
LHSC->getValue() != Op0KnownZeroInverted)
LHS = Op0;
// If the LHS is 1 << x, and we know the result is a power of 2 like 8,
// then turn "((1 << x)&8) == 0" into "x != 3".
- Value *X = 0;
+ // or turn "((1 << x)&7) == 0" into "x > 2".
+ Value *X = nullptr;
if (match(LHS, m_Shl(m_One(), m_Value(X)))) {
- unsigned CmpVal = Op0KnownZeroInverted.countTrailingZeros();
- return new ICmpInst(ICmpInst::ICMP_NE, X,
- ConstantInt::get(X->getType(), CmpVal));
+ APInt ValToCheck = Op0KnownZeroInverted;
+ if (ValToCheck.isPowerOf2()) {
+ unsigned CmpVal = ValToCheck.countTrailingZeros();
+ return new ICmpInst(ICmpInst::ICMP_NE, X,
+ ConstantInt::get(X->getType(), CmpVal));
+ } else if ((++ValToCheck).isPowerOf2()) {
+ unsigned CmpVal = ValToCheck.countTrailingZeros() - 1;
+ return new ICmpInst(ICmpInst::ICMP_UGT, X,
+ ConstantInt::get(X->getType(), CmpVal));
+ }
}
// If the LHS is 8 >>u x, and we know the result is a power of 2 like 1,
ConstantInt::get(X->getType(),
CI->countTrailingZeros()));
}
-
break;
}
case ICmpInst::ICMP_NE: {
// bit is set. If the comparison is against zero, then this is a check
// to see if *that* bit is set.
APInt Op0KnownZeroInverted = ~Op0KnownZero;
- if (~Op1KnownZero == 0 && Op0KnownZeroInverted.isPowerOf2()) {
+ if (~Op1KnownZero == 0) {
// If the LHS is an AND with the same constant, look through it.
- Value *LHS = 0;
- ConstantInt *LHSC = 0;
+ Value *LHS = nullptr;
+ ConstantInt *LHSC = nullptr;
if (!match(Op0, m_And(m_Value(LHS), m_ConstantInt(LHSC))) ||
LHSC->getValue() != Op0KnownZeroInverted)
LHS = Op0;
// If the LHS is 1 << x, and we know the result is a power of 2 like 8,
// then turn "((1 << x)&8) != 0" into "x == 3".
- Value *X = 0;
+ // or turn "((1 << x)&7) != 0" into "x < 3".
+ Value *X = nullptr;
if (match(LHS, m_Shl(m_One(), m_Value(X)))) {
- unsigned CmpVal = Op0KnownZeroInverted.countTrailingZeros();
- return new ICmpInst(ICmpInst::ICMP_EQ, X,
- ConstantInt::get(X->getType(), CmpVal));
+ APInt ValToCheck = Op0KnownZeroInverted;
+ if (ValToCheck.isPowerOf2()) {
+ unsigned CmpVal = ValToCheck.countTrailingZeros();
+ return new ICmpInst(ICmpInst::ICMP_EQ, X,
+ ConstantInt::get(X->getType(), CmpVal));
+ } else if ((++ValToCheck).isPowerOf2()) {
+ unsigned CmpVal = ValToCheck.countTrailingZeros();
+ return new ICmpInst(ICmpInst::ICMP_ULT, X,
+ ConstantInt::get(X->getType(), CmpVal));
+ }
}
// If the LHS is 8 >>u x, and we know the result is a power of 2 like 1,
ConstantInt::get(X->getType(),
CI->countTrailingZeros()));
}
-
break;
}
case ICmpInst::ICMP_ULT:
// operands has at least one user besides the compare (the select),
// which would often largely negate the benefit of folding anyway.
if (I.hasOneUse())
- if (SelectInst *SI = dyn_cast<SelectInst>(*I.use_begin()))
+ if (SelectInst *SI = dyn_cast<SelectInst>(*I.user_begin()))
if ((SI->getOperand(1) == Op0 && SI->getOperand(2) == Op1) ||
(SI->getOperand(2) == Op0 && SI->getOperand(1) == Op1))
- return 0;
+ return nullptr;
// See if we are doing a comparison between a constant and an instruction that
// can be folded into the comparison.
// If either operand of the select is a constant, we can fold the
// comparison into the select arms, which will cause one to be
// constant folded and the select turned into a bitwise or.
- Value *Op1 = 0, *Op2 = 0;
- if (Constant *C = dyn_cast<Constant>(LHSI->getOperand(1)))
+ Value *Op1 = nullptr, *Op2 = nullptr;
+ ConstantInt *CI = nullptr;
+ if (Constant *C = dyn_cast<Constant>(LHSI->getOperand(1))) {
Op1 = ConstantExpr::getICmp(I.getPredicate(), C, RHSC);
- if (Constant *C = dyn_cast<Constant>(LHSI->getOperand(2)))
+ CI = dyn_cast<ConstantInt>(Op1);
+ }
+ if (Constant *C = dyn_cast<Constant>(LHSI->getOperand(2))) {
Op2 = ConstantExpr::getICmp(I.getPredicate(), C, RHSC);
+ CI = dyn_cast<ConstantInt>(Op2);
+ }
// We only want to perform this transformation if it will not lead to
// additional code. This is true if either both sides of the select
// fold to a constant (in which case the icmp is replaced with a select
// which will usually simplify) or this is the only user of the
// select (in which case we are trading a select+icmp for a simpler
- // select+icmp).
- if ((Op1 && Op2) || (LHSI->hasOneUse() && (Op1 || Op2))) {
+ // select+icmp) or all uses of the select can be replaced based on
+ // dominance information ("Global cases").
+ bool Transform = false;
+ if (Op1 && Op2)
+ Transform = true;
+ else if (Op1 || Op2) {
+ // Local case
+ if (LHSI->hasOneUse())
+ Transform = true;
+ // Global cases
+ else if (CI && !CI->isZero())
+ // When Op1 is constant try replacing select with second operand.
+ // Otherwise Op2 is constant and try replacing select with first
+ // operand.
+ Transform = replacedSelectWithOperand(cast<SelectInst>(LHSI), &I,
+ Op1 ? 2 : 1);
+ }
+ if (Transform) {
if (!Op1)
Op1 = Builder->CreateICmp(I.getPredicate(), LHSI->getOperand(1),
RHSC, I.getName());
}
case Instruction::IntToPtr:
// icmp pred inttoptr(X), null -> icmp pred X, 0
- if (RHSC->isNullValue() && DL &&
- DL->getIntPtrType(RHSC->getType()) ==
- LHSI->getOperand(0)->getType())
+ if (RHSC->isNullValue() &&
+ DL.getIntPtrType(RHSC->getType()) == LHSI->getOperand(0)->getType())
return new ICmpInst(I.getPredicate(), LHSI->getOperand(0),
Constant::getNullValue(LHSI->getOperand(0)->getType()));
break;
ICmpInst::getSwappedPredicate(I.getPredicate()), I))
return NI;
+ // Try to optimize equality comparisons against alloca-based pointers.
+ if (Op0->getType()->isPointerTy() && I.isEquality()) {
+ assert(Op1->getType()->isPointerTy() && "Comparing pointer with non-pointer?");
+ if (auto *Alloca = dyn_cast<AllocaInst>(GetUnderlyingObject(Op0, DL)))
+ if (Instruction *New = FoldAllocaCmp(I, Alloca, Op1))
+ return New;
+ if (auto *Alloca = dyn_cast<AllocaInst>(GetUnderlyingObject(Op1, DL)))
+ if (Instruction *New = FoldAllocaCmp(I, Alloca, Op0))
+ return New;
+ }
+
// Test to see if the operands of the icmp are casted versions of other
// values. If the ptr->ptr cast can be stripped off both arguments, we do so
// now.
// Analyze the case when either Op0 or Op1 is an add instruction.
// Op0 = A + B (or A and B are null); Op1 = C + D (or C and D are null).
- Value *A = 0, *B = 0, *C = 0, *D = 0;
+ Value *A = nullptr, *B = nullptr, *C = nullptr, *D = nullptr;
if (BO0 && BO0->getOpcode() == Instruction::Add)
A = BO0->getOperand(0), B = BO0->getOperand(1);
if (BO1 && BO1->getOpcode() == Instruction::Add)
C = BO1->getOperand(0), D = BO1->getOperand(1);
+ // icmp (X+cst) < 0 --> X < -cst
+ if (NoOp0WrapProblem && ICmpInst::isSigned(Pred) && match(Op1, m_Zero()))
+ if (ConstantInt *RHSC = dyn_cast_or_null<ConstantInt>(B))
+ if (!RHSC->isMinValue(/*isSigned=*/true))
+ return new ICmpInst(Pred, A, ConstantExpr::getNeg(RHSC));
+
// icmp (X+Y), X -> icmp Y, 0 for equalities or if there is no overflow.
if ((A == Op1 || B == Op1) && NoOp0WrapProblem)
return new ICmpInst(Pred, A == Op1 ? B : A,
match(B, m_One()))
return new ICmpInst(CmpInst::ICMP_SGE, A, Op1);
+ // icmp sgt X, (Y + -1) -> icmp sge X, Y
+ if (C && NoOp1WrapProblem && Pred == CmpInst::ICMP_SGT &&
+ match(D, m_AllOnes()))
+ return new ICmpInst(CmpInst::ICMP_SGE, Op0, C);
+
+ // icmp sle X, (Y + -1) -> icmp slt X, Y
+ if (C && NoOp1WrapProblem && Pred == CmpInst::ICMP_SLE &&
+ match(D, m_AllOnes()))
+ return new ICmpInst(CmpInst::ICMP_SLT, Op0, C);
+
+ // icmp sge X, (Y + 1) -> icmp sgt X, Y
+ if (C && NoOp1WrapProblem && Pred == CmpInst::ICMP_SGE &&
+ match(D, m_One()))
+ return new ICmpInst(CmpInst::ICMP_SGT, Op0, C);
+
+ // icmp slt X, (Y + 1) -> icmp sle X, Y
+ if (C && NoOp1WrapProblem && Pred == CmpInst::ICMP_SLT &&
+ match(D, m_One()))
+ return new ICmpInst(CmpInst::ICMP_SLE, Op0, C);
+
// if C1 has greater magnitude than C2:
// icmp (X + C1), (Y + C2) -> icmp (X + C3), Y
// s.t. C3 = C1 - C2
// Analyze the case when either Op0 or Op1 is a sub instruction.
// Op0 = A - B (or A and B are null); Op1 = C - D (or C and D are null).
- A = 0; B = 0; C = 0; D = 0;
+ A = nullptr; B = nullptr; C = nullptr; D = nullptr;
if (BO0 && BO0->getOpcode() == Instruction::Sub)
A = BO0->getOperand(0), B = BO0->getOperand(1);
if (BO1 && BO1->getOpcode() == Instruction::Sub)
BO0->hasOneUse() && BO1->hasOneUse())
return new ICmpInst(Pred, D, B);
- BinaryOperator *SRem = NULL;
+ // icmp (0-X) < cst --> x > -cst
+ if (NoOp0WrapProblem && ICmpInst::isSigned(Pred)) {
+ Value *X;
+ if (match(BO0, m_Neg(m_Value(X))))
+ if (ConstantInt *RHSC = dyn_cast<ConstantInt>(Op1))
+ if (!RHSC->isMinValue(/*isSigned=*/true))
+ return new ICmpInst(I.getSwappedPredicate(), X,
+ ConstantExpr::getNeg(RHSC));
+ }
+
+ BinaryOperator *SRem = nullptr;
// icmp (srem X, Y), Y
if (BO0 && BO0->getOpcode() == Instruction::SRem &&
Op1 == BO0->getOperand(1))
}
}
}
+
+ if (BO0) {
+ // Transform A & (L - 1) `ult` L --> L != 0
+ auto LSubOne = m_Add(m_Specific(Op1), m_AllOnes());
+ auto BitwiseAnd =
+ m_CombineOr(m_And(m_Value(), LSubOne), m_And(LSubOne, m_Value()));
+
+ if (match(BO0, BitwiseAnd) && I.getPredicate() == ICmpInst::ICMP_ULT) {
+ auto *Zero = Constant::getNullValue(BO0->getType());
+ return new ICmpInst(ICmpInst::ICMP_NE, Op1, Zero);
+ }
+ }
}
{ Value *A, *B;
// and (A & ~B) != 0 --> (A & B) == 0
// if A is a power of 2.
if (match(Op0, m_And(m_Value(A), m_Not(m_Value(B)))) &&
- match(Op1, m_Zero()) && isKnownToBeAPowerOfTwo(A) && I.isEquality())
+ match(Op1, m_Zero()) &&
+ isKnownToBeAPowerOfTwo(A, DL, false, 0, AC, &I, DT) && I.isEquality())
return new ICmpInst(I.getInversePredicate(),
Builder->CreateAnd(A, B),
Op1);
return new ICmpInst(I.getPredicate(), ConstantExpr::getNot(RHSC), A);
}
- // (a+b) <u a --> llvm.uadd.with.overflow.
- // (a+b) <u b --> llvm.uadd.with.overflow.
- if (I.getPredicate() == ICmpInst::ICMP_ULT &&
- match(Op0, m_Add(m_Value(A), m_Value(B))) &&
- (Op1 == A || Op1 == B))
- if (Instruction *R = ProcessUAddIdiom(I, Op0, *this))
- return R;
+ Instruction *AddI = nullptr;
+ if (match(&I, m_UAddWithOverflow(m_Value(A), m_Value(B),
+ m_Instruction(AddI))) &&
+ isa<IntegerType>(A->getType())) {
+ Value *Result;
+ Constant *Overflow;
+ if (OptimizeOverflowCheck(OCF_UNSIGNED_ADD, A, B, *AddI, Result,
+ Overflow)) {
+ ReplaceInstUsesWith(*AddI, Result);
+ return ReplaceInstUsesWith(I, Overflow);
+ }
+ }
- // a >u (a+b) --> llvm.uadd.with.overflow.
- // b >u (a+b) --> llvm.uadd.with.overflow.
- if (I.getPredicate() == ICmpInst::ICMP_UGT &&
- match(Op1, m_Add(m_Value(A), m_Value(B))) &&
- (Op0 == A || Op0 == B))
- if (Instruction *R = ProcessUAddIdiom(I, Op1, *this))
+ // (zext a) * (zext b) --> llvm.umul.with.overflow.
+ if (match(Op0, m_Mul(m_ZExt(m_Value(A)), m_ZExt(m_Value(B))))) {
+ if (Instruction *R = ProcessUMulZExtIdiom(I, Op0, Op1, *this))
return R;
+ }
+ if (match(Op1, m_Mul(m_ZExt(m_Value(A)), m_ZExt(m_Value(B))))) {
+ if (Instruction *R = ProcessUMulZExtIdiom(I, Op1, Op0, *this))
+ return R;
+ }
}
if (I.isEquality()) {
// (X&Z) == (Y&Z) -> (X^Y) & Z == 0
if (match(Op0, m_OneUse(m_And(m_Value(A), m_Value(B)))) &&
match(Op1, m_OneUse(m_And(m_Value(C), m_Value(D))))) {
- Value *X = 0, *Y = 0, *Z = 0;
+ Value *X = nullptr, *Y = nullptr, *Z = nullptr;
if (A == C) {
X = B; Y = D; Z = A;
}
}
+ // (A << C) == (B << C) --> ((A^B) & (~0U >> C)) == 0
+ if (match(Op0, m_OneUse(m_Shl(m_Value(A), m_ConstantInt(Cst1)))) &&
+ match(Op1, m_OneUse(m_Shl(m_Value(B), m_Specific(Cst1))))) {
+ unsigned TypeBits = Cst1->getBitWidth();
+ unsigned ShAmt = (unsigned)Cst1->getLimitedValue(TypeBits);
+ if (ShAmt < TypeBits && ShAmt != 0) {
+ Value *Xor = Builder->CreateXor(A, B, I.getName() + ".unshifted");
+ APInt AndVal = APInt::getLowBitsSet(TypeBits, TypeBits - ShAmt);
+ Value *And = Builder->CreateAnd(Xor, Builder->getInt(AndVal),
+ I.getName() + ".mask");
+ return new ICmpInst(I.getPredicate(), And,
+ Constant::getNullValue(Cst1->getType()));
+ }
+ }
+
// Transform "icmp eq (trunc (lshr(X, cst1)), cst" to
// "icmp (and X, mask), cst"
uint64_t ShAmt = 0;
}
}
+ // The 'cmpxchg' instruction returns an aggregate containing the old value and
+ // an i1 which indicates whether or not we successfully did the swap.
+ //
+ // Replace comparisons between the old value and the expected value with the
+ // indicator that 'cmpxchg' returns.
+ //
+ // N.B. This transform is only valid when the 'cmpxchg' is not permitted to
+ // spuriously fail. In those cases, the old value may equal the expected
+ // value but it is possible for the swap to not occur.
+ if (I.getPredicate() == ICmpInst::ICMP_EQ)
+ if (auto *EVI = dyn_cast<ExtractValueInst>(Op0))
+ if (auto *ACXI = dyn_cast<AtomicCmpXchgInst>(EVI->getAggregateOperand()))
+ if (EVI->getIndices()[0] == 0 && ACXI->getCompareOperand() == Op1 &&
+ !ACXI->isWeak())
+ return ExtractValueInst::Create(ACXI, 1);
+
{
Value *X; ConstantInt *Cst;
// icmp X+Cst, X
if (match(Op1, m_Add(m_Value(X), m_ConstantInt(Cst))) && Op0 == X)
return FoldICmpAddOpCst(I, X, Cst, I.getSwappedPredicate());
}
- return Changed ? &I : 0;
+ return Changed ? &I : nullptr;
}
/// FoldFCmp_IntToFP_Cst - Fold fcmp ([us]itofp x, cst) if possible.
-///
Instruction *InstCombiner::FoldFCmp_IntToFP_Cst(FCmpInst &I,
Instruction *LHSI,
Constant *RHSC) {
- if (!isa<ConstantFP>(RHSC)) return 0;
+ if (!isa<ConstantFP>(RHSC)) return nullptr;
const APFloat &RHS = cast<ConstantFP>(RHSC)->getValueAPF();
// Get the width of the mantissa. We don't want to hack on conversions that
// might lose information from the integer, e.g. "i64 -> float"
int MantissaWidth = LHSI->getType()->getFPMantissaWidth();
- if (MantissaWidth == -1) return 0; // Unknown.
+ if (MantissaWidth == -1) return nullptr; // Unknown.
- // Check to see that the input is converted from an integer type that is small
- // enough that preserves all bits. TODO: check here for "known" sign bits.
- // This would allow us to handle (fptosi (x >>s 62) to float) if x is i64 f.e.
- unsigned InputSize = LHSI->getOperand(0)->getType()->getScalarSizeInBits();
+ IntegerType *IntTy = cast<IntegerType>(LHSI->getOperand(0)->getType());
- // If this is a uitofp instruction, we need an extra bit to hold the sign.
bool LHSUnsigned = isa<UIToFPInst>(LHSI);
- if (LHSUnsigned)
- ++InputSize;
- // If the conversion would lose info, don't hack on this.
- if ((int)InputSize > MantissaWidth)
- return 0;
+ if (I.isEquality()) {
+ FCmpInst::Predicate P = I.getPredicate();
+ bool IsExact = false;
+ APSInt RHSCvt(IntTy->getBitWidth(), LHSUnsigned);
+ RHS.convertToInteger(RHSCvt, APFloat::rmNearestTiesToEven, &IsExact);
+
+ // If the floating point constant isn't an integer value, we know if we will
+ // ever compare equal / not equal to it.
+ if (!IsExact) {
+ // TODO: Can never be -0.0 and other non-representable values
+ APFloat RHSRoundInt(RHS);
+ RHSRoundInt.roundToIntegral(APFloat::rmNearestTiesToEven);
+ if (RHS.compare(RHSRoundInt) != APFloat::cmpEqual) {
+ if (P == FCmpInst::FCMP_OEQ || P == FCmpInst::FCMP_UEQ)
+ return ReplaceInstUsesWith(I, Builder->getFalse());
+
+ assert(P == FCmpInst::FCMP_ONE || P == FCmpInst::FCMP_UNE);
+ return ReplaceInstUsesWith(I, Builder->getTrue());
+ }
+ }
+
+ // TODO: If the constant is exactly representable, is it always OK to do
+ // equality compares as integer?
+ }
+
+ // Check to see that the input is converted from an integer type that is small
+ // enough that preserves all bits. TODO: check here for "known" sign bits.
+ // This would allow us to handle (fptosi (x >>s 62) to float) if x is i64 f.e.
+ unsigned InputSize = IntTy->getScalarSizeInBits();
+
+ // Following test does NOT adjust InputSize downwards for signed inputs,
+ // because the most negative value still requires all the mantissa bits
+ // to distinguish it from one less than that value.
+ if ((int)InputSize > MantissaWidth) {
+ // Conversion would lose accuracy. Check if loss can impact comparison.
+ int Exp = ilogb(RHS);
+ if (Exp == APFloat::IEK_Inf) {
+ int MaxExponent = ilogb(APFloat::getLargest(RHS.getSemantics()));
+ if (MaxExponent < (int)InputSize - !LHSUnsigned)
+ // Conversion could create infinity.
+ return nullptr;
+ } else {
+ // Note that if RHS is zero or NaN, then Exp is negative
+ // and first condition is trivially false.
+ if (MantissaWidth <= Exp && Exp <= (int)InputSize - !LHSUnsigned)
+ // Conversion could affect comparison.
+ return nullptr;
+ }
+ }
// Otherwise, we can potentially simplify the comparison. We know that it
// will always come through as an integer value and we know the constant is
return ReplaceInstUsesWith(I, Builder->getFalse());
}
- IntegerType *IntTy = cast<IntegerType>(LHSI->getOperand(0)->getType());
-
// Now we know that the APFloat is a normal number, zero or inf.
// See if the FP constant is too large for the integer. For example,
Value *Op0 = I.getOperand(0), *Op1 = I.getOperand(1);
- if (Value *V = SimplifyFCmpInst(I.getPredicate(), Op0, Op1, DL))
+ if (Value *V = SimplifyFCmpInst(I.getPredicate(), Op0, Op1,
+ I.getFastMathFlags(), DL, TLI, DT, AC, &I))
return ReplaceInstUsesWith(I, V);
// Simplify 'fcmp pred X, X'
}
}
+ // Test if the FCmpInst instruction is used exclusively by a select as
+ // part of a minimum or maximum operation. If so, refrain from doing
+ // any other folding. This helps out other analyses which understand
+ // non-obfuscated minimum and maximum idioms, such as ScalarEvolution
+ // and CodeGen. And in this case, at least one of the comparison
+ // operands has at least one user besides the compare (the select),
+ // which would often largely negate the benefit of folding anyway.
+ if (I.hasOneUse())
+ if (SelectInst *SI = dyn_cast<SelectInst>(*I.user_begin()))
+ if ((SI->getOperand(1) == Op0 && SI->getOperand(2) == Op1) ||
+ (SI->getOperand(2) == Op0 && SI->getOperand(1) == Op1))
+ return nullptr;
+
// Handle fcmp with constant RHS
if (Constant *RHSC = dyn_cast<Constant>(Op1)) {
if (Instruction *LHSI = dyn_cast<Instruction>(Op0))
}
break;
case Instruction::Call: {
+ if (!RHSC->isNullValue())
+ break;
+
CallInst *CI = cast<CallInst>(LHSI);
- LibFunc::Func Func;
+ const Function *F = CI->getCalledFunction();
+ if (!F)
+ break;
+
// Various optimization for fabs compared with zero.
- if (RHSC->isNullValue() && CI->getCalledFunction() &&
- TLI->getLibFunc(CI->getCalledFunction()->getName(), Func) &&
- TLI->has(Func)) {
- if (Func == LibFunc::fabs || Func == LibFunc::fabsf ||
- Func == LibFunc::fabsl) {
- switch (I.getPredicate()) {
- default: break;
+ LibFunc::Func Func;
+ if (F->getIntrinsicID() == Intrinsic::fabs ||
+ (TLI->getLibFunc(F->getName(), Func) && TLI->has(Func) &&
+ (Func == LibFunc::fabs || Func == LibFunc::fabsf ||
+ Func == LibFunc::fabsl))) {
+ switch (I.getPredicate()) {
+ default:
+ break;
// fabs(x) < 0 --> false
- case FCmpInst::FCMP_OLT:
- return ReplaceInstUsesWith(I, Builder->getFalse());
+ case FCmpInst::FCMP_OLT:
+ return ReplaceInstUsesWith(I, Builder->getFalse());
// fabs(x) > 0 --> x != 0
- case FCmpInst::FCMP_OGT:
- return new FCmpInst(FCmpInst::FCMP_ONE, CI->getArgOperand(0),
- RHSC);
+ case FCmpInst::FCMP_OGT:
+ return new FCmpInst(FCmpInst::FCMP_ONE, CI->getArgOperand(0), RHSC);
// fabs(x) <= 0 --> x == 0
- case FCmpInst::FCMP_OLE:
- return new FCmpInst(FCmpInst::FCMP_OEQ, CI->getArgOperand(0),
- RHSC);
+ case FCmpInst::FCMP_OLE:
+ return new FCmpInst(FCmpInst::FCMP_OEQ, CI->getArgOperand(0), RHSC);
// fabs(x) >= 0 --> !isnan(x)
- case FCmpInst::FCMP_OGE:
- return new FCmpInst(FCmpInst::FCMP_ORD, CI->getArgOperand(0),
- RHSC);
+ case FCmpInst::FCMP_OGE:
+ return new FCmpInst(FCmpInst::FCMP_ORD, CI->getArgOperand(0), RHSC);
// fabs(x) == 0 --> x == 0
// fabs(x) != 0 --> x != 0
- case FCmpInst::FCMP_OEQ:
- case FCmpInst::FCMP_UEQ:
- case FCmpInst::FCMP_ONE:
- case FCmpInst::FCMP_UNE:
- return new FCmpInst(I.getPredicate(), CI->getArgOperand(0),
- RHSC);
- }
+ case FCmpInst::FCMP_OEQ:
+ case FCmpInst::FCMP_UEQ:
+ case FCmpInst::FCMP_ONE:
+ case FCmpInst::FCMP_UNE:
+ return new FCmpInst(I.getPredicate(), CI->getArgOperand(0), RHSC);
}
}
}
return new FCmpInst(I.getPredicate(), LHSExt->getOperand(0),
RHSExt->getOperand(0));
- return Changed ? &I : 0;
+ return Changed ? &I : nullptr;
}