#include "InstCombine.h"
#include "llvm/Analysis/ConstantFolding.h"
#include "llvm/IR/DataLayout.h"
-#include "llvm/Support/PatternMatch.h"
+#include "llvm/IR/PatternMatch.h"
#include "llvm/Target/TargetLibraryInfo.h"
using namespace llvm;
using namespace PatternMatch;
+#define DEBUG_TYPE "instcombine"
+
/// DecomposeSimpleLinearExpr - Analyze 'Val', seeing if it is a simple linear
/// expression. If so, decompose it, returning some value X, such that Val is
/// X*Scale+Offset.
Scale = 0;
return ConstantInt::get(Val->getType(), 0);
}
-
+
if (BinaryOperator *I = dyn_cast<BinaryOperator>(Val)) {
// Cannot look past anything that might overflow.
OverflowingBinaryOperator *OBI = dyn_cast<OverflowingBinaryOperator>(Val);
Offset = 0;
return I->getOperand(0);
}
-
+
if (I->getOpcode() == Instruction::Mul) {
// This value is scaled by 'RHS'.
Scale = RHS->getZExtValue();
Offset = 0;
return I->getOperand(0);
}
-
+
if (I->getOpcode() == Instruction::Add) {
- // We have X+C. Check to see if we really have (X*C2)+C1,
+ // We have X+C. Check to see if we really have (X*C2)+C1,
// where C1 is divisible by C2.
unsigned SubScale;
- Value *SubVal =
+ Value *SubVal =
DecomposeSimpleLinearExpr(I->getOperand(0), SubScale, Offset);
Offset += RHS->getZExtValue();
Scale = SubScale;
Instruction *InstCombiner::PromoteCastOfAllocation(BitCastInst &CI,
AllocaInst &AI) {
// This requires DataLayout to get the alloca alignment and size information.
- if (!TD) return 0;
+ if (!DL) return nullptr;
PointerType *PTy = cast<PointerType>(CI.getType());
-
+
BuilderTy AllocaBuilder(*Builder);
AllocaBuilder.SetInsertPoint(AI.getParent(), &AI);
// Get the type really allocated and the type casted to.
Type *AllocElTy = AI.getAllocatedType();
Type *CastElTy = PTy->getElementType();
- if (!AllocElTy->isSized() || !CastElTy->isSized()) return 0;
+ if (!AllocElTy->isSized() || !CastElTy->isSized()) return nullptr;
- unsigned AllocElTyAlign = TD->getABITypeAlignment(AllocElTy);
- unsigned CastElTyAlign = TD->getABITypeAlignment(CastElTy);
- if (CastElTyAlign < AllocElTyAlign) return 0;
+ unsigned AllocElTyAlign = DL->getABITypeAlignment(AllocElTy);
+ unsigned CastElTyAlign = DL->getABITypeAlignment(CastElTy);
+ if (CastElTyAlign < AllocElTyAlign) return nullptr;
// If the allocation has multiple uses, only promote it if we are strictly
// increasing the alignment of the resultant allocation. If we keep it the
// same, we open the door to infinite loops of various kinds.
- if (!AI.hasOneUse() && CastElTyAlign == AllocElTyAlign) return 0;
+ if (!AI.hasOneUse() && CastElTyAlign == AllocElTyAlign) return nullptr;
+
+ uint64_t AllocElTySize = DL->getTypeAllocSize(AllocElTy);
+ uint64_t CastElTySize = DL->getTypeAllocSize(CastElTy);
+ if (CastElTySize == 0 || AllocElTySize == 0) return nullptr;
- uint64_t AllocElTySize = TD->getTypeAllocSize(AllocElTy);
- uint64_t CastElTySize = TD->getTypeAllocSize(CastElTy);
- if (CastElTySize == 0 || AllocElTySize == 0) return 0;
+ // If the allocation has multiple uses, only promote it if we're not
+ // shrinking the amount of memory being allocated.
+ uint64_t AllocElTyStoreSize = DL->getTypeStoreSize(AllocElTy);
+ uint64_t CastElTyStoreSize = DL->getTypeStoreSize(CastElTy);
+ if (!AI.hasOneUse() && CastElTyStoreSize < AllocElTyStoreSize) return nullptr;
// See if we can satisfy the modulus by pulling a scale out of the array
// size argument.
uint64_t ArrayOffset;
Value *NumElements = // See if the array size is a decomposable linear expr.
DecomposeSimpleLinearExpr(AI.getOperand(0), ArraySizeScale, ArrayOffset);
-
+
// If we can now satisfy the modulus, by using a non-1 scale, we really can
// do the xform.
if ((AllocElTySize*ArraySizeScale) % CastElTySize != 0 ||
- (AllocElTySize*ArrayOffset ) % CastElTySize != 0) return 0;
+ (AllocElTySize*ArrayOffset ) % CastElTySize != 0) return nullptr;
unsigned Scale = (AllocElTySize*ArraySizeScale)/CastElTySize;
- Value *Amt = 0;
+ Value *Amt = nullptr;
if (Scale == 1) {
Amt = NumElements;
} else {
// Insert before the alloca, not before the cast.
Amt = AllocaBuilder.CreateMul(Amt, NumElements);
}
-
+
if (uint64_t Offset = (AllocElTySize*ArrayOffset)/CastElTySize) {
Value *Off = ConstantInt::get(AI.getArraySize()->getType(),
Offset, true);
Amt = AllocaBuilder.CreateAdd(Amt, Off);
}
-
+
AllocaInst *New = AllocaBuilder.CreateAlloca(CastElTy, Amt);
New->setAlignment(AI.getAlignment());
New->takeName(&AI);
-
+ New->setUsedWithInAlloca(AI.isUsedWithInAlloca());
+
// If the allocation has multiple real uses, insert a cast and change all
// things that used it to use the new cast. This will also hack on CI, but it
// will die soon.
return ReplaceInstUsesWith(CI, New);
}
-/// EvaluateInDifferentType - Given an expression that
+/// EvaluateInDifferentType - Given an expression that
/// CanEvaluateTruncated or CanEvaluateSExtd returns true for, actually
/// insert the code to evaluate the expression.
-Value *InstCombiner::EvaluateInDifferentType(Value *V, Type *Ty,
+Value *InstCombiner::EvaluateInDifferentType(Value *V, Type *Ty,
bool isSigned) {
if (Constant *C = dyn_cast<Constant>(V)) {
C = ConstantExpr::getIntegerCast(C, Ty, isSigned /*Sext or ZExt*/);
- // If we got a constantexpr back, try to simplify it with TD info.
+ // If we got a constantexpr back, try to simplify it with DL info.
if (ConstantExpr *CE = dyn_cast<ConstantExpr>(C))
- C = ConstantFoldConstantExpression(CE, TD, TLI);
+ C = ConstantFoldConstantExpression(CE, DL, TLI);
return C;
}
// Otherwise, it must be an instruction.
Instruction *I = cast<Instruction>(V);
- Instruction *Res = 0;
+ Instruction *Res = nullptr;
unsigned Opc = I->getOpcode();
switch (Opc) {
case Instruction::Add:
Value *RHS = EvaluateInDifferentType(I->getOperand(1), Ty, isSigned);
Res = BinaryOperator::Create((Instruction::BinaryOps)Opc, LHS, RHS);
break;
- }
+ }
case Instruction::Trunc:
case Instruction::ZExt:
case Instruction::SExt:
// new.
if (I->getOperand(0)->getType() == Ty)
return I->getOperand(0);
-
+
// Otherwise, must be the same type of cast, so just reinsert a new one.
// This also handles the case of zext(trunc(x)) -> zext(x).
Res = CastInst::CreateIntegerCast(I->getOperand(0), Ty,
Res = NPN;
break;
}
- default:
+ default:
// TODO: Can handle more cases here.
llvm_unreachable("Unreachable!");
}
-
+
Res->takeName(I);
return InsertNewInstWith(Res, *I);
}
/// This function is a wrapper around CastInst::isEliminableCastPair. It
/// simply extracts arguments and returns what that function returns.
-static Instruction::CastOps
+static Instruction::CastOps
isEliminableCastPair(
const CastInst *CI, ///< The first cast instruction
unsigned opcode, ///< The opcode of the second cast instruction
Type *DstTy, ///< The target type for the second cast instruction
- DataLayout *TD ///< The target data for pointer size
+ const DataLayout *DL ///< The target data for pointer size
) {
Type *SrcTy = CI->getOperand(0)->getType(); // A from above
// Get the opcodes of the two Cast instructions
Instruction::CastOps firstOp = Instruction::CastOps(CI->getOpcode());
Instruction::CastOps secondOp = Instruction::CastOps(opcode);
- Type *SrcIntPtrTy = TD && SrcTy->isPtrOrPtrVectorTy() ?
- TD->getIntPtrType(SrcTy) : 0;
- Type *MidIntPtrTy = TD && MidTy->isPtrOrPtrVectorTy() ?
- TD->getIntPtrType(MidTy) : 0;
- Type *DstIntPtrTy = TD && DstTy->isPtrOrPtrVectorTy() ?
- TD->getIntPtrType(DstTy) : 0;
+ Type *SrcIntPtrTy = DL && SrcTy->isPtrOrPtrVectorTy() ?
+ DL->getIntPtrType(SrcTy) : nullptr;
+ Type *MidIntPtrTy = DL && MidTy->isPtrOrPtrVectorTy() ?
+ DL->getIntPtrType(MidTy) : nullptr;
+ Type *DstIntPtrTy = DL && DstTy->isPtrOrPtrVectorTy() ?
+ DL->getIntPtrType(DstTy) : nullptr;
unsigned Res = CastInst::isEliminableCastPair(firstOp, secondOp, SrcTy, MidTy,
DstTy, SrcIntPtrTy, MidIntPtrTy,
DstIntPtrTy);
if ((Res == Instruction::IntToPtr && SrcTy != DstIntPtrTy) ||
(Res == Instruction::PtrToInt && DstTy != SrcIntPtrTy))
Res = 0;
-
+
return Instruction::CastOps(Res);
}
Type *Ty) {
// Noop casts and casts of constants should be eliminated trivially.
if (V->getType() == Ty || isa<Constant>(V)) return false;
-
+
// If this is another cast that can be eliminated, we prefer to have it
// eliminated.
if (const CastInst *CI = dyn_cast<CastInst>(V))
- if (isEliminableCastPair(CI, opc, Ty, TD))
+ if (isEliminableCastPair(CI, opc, Ty, DL))
return false;
-
+
// If this is a vector sext from a compare, then we don't want to break the
// idiom where each element of the extended vector is either zero or all ones.
if (opc == Instruction::SExt && isa<CmpInst>(V) && Ty->isVectorTy())
return false;
-
+
return true;
}
// Many cases of "cast of a cast" are eliminable. If it's eliminable we just
// eliminate it now.
if (CastInst *CSrc = dyn_cast<CastInst>(Src)) { // A->B->C cast
- if (Instruction::CastOps opc =
- isEliminableCastPair(CSrc, CI.getOpcode(), CI.getType(), TD)) {
+ if (Instruction::CastOps opc =
+ isEliminableCastPair(CSrc, CI.getOpcode(), CI.getType(), DL)) {
// The first cast (CSrc) is eliminable so we need to fix up or replace
// the second cast (CI). CSrc will then have a good chance of being dead.
return CastInst::Create(opc, CSrc->getOperand(0), CI.getType());
if (Instruction *NV = FoldOpIntoPhi(CI))
return NV;
}
-
- return 0;
+
+ return nullptr;
}
/// CanEvaluateTruncated - Return true if we can evaluate the specified
// We can always evaluate constants in another type.
if (isa<Constant>(V))
return true;
-
+
Instruction *I = dyn_cast<Instruction>(V);
if (!I) return false;
-
+
Type *OrigTy = V->getType();
-
+
// If this is an extension from the dest type, we can eliminate it, even if it
// has multiple uses.
- if ((isa<ZExtInst>(I) || isa<SExtInst>(I)) &&
+ if ((isa<ZExtInst>(I) || isa<SExtInst>(I)) &&
I->getOperand(0)->getType() == Ty)
return true;
// TODO: Can handle more cases here.
break;
}
-
+
return false;
}
Instruction *InstCombiner::visitTrunc(TruncInst &CI) {
if (Instruction *Result = commonCastTransforms(CI))
return Result;
-
- // See if we can simplify any instructions used by the input whose sole
+
+ // See if we can simplify any instructions used by the input whose sole
// purpose is to compute bits we don't care about.
if (SimplifyDemandedInstructionBits(CI))
return &CI;
-
+
Value *Src = CI.getOperand(0);
Type *DestTy = CI.getType(), *SrcTy = Src->getType();
-
+
// Attempt to truncate the entire input expression tree to the destination
// type. Only do this if the dest type is a simple type, don't convert the
// expression tree to something weird like i93 unless the source is also
// strange.
if ((DestTy->isVectorTy() || ShouldChangeType(SrcTy, DestTy)) &&
CanEvaluateTruncated(Src, DestTy)) {
-
+
// If this cast is a truncate, evaluting in a different type always
// eliminates the cast, so it is always a win.
DEBUG(dbgs() << "ICE: EvaluateInDifferentType converting expression type"
Value *Zero = Constant::getNullValue(Src->getType());
return new ICmpInst(ICmpInst::ICMP_NE, Src, Zero);
}
-
+
// Transform trunc(lshr (zext A), Cst) to eliminate one type conversion.
- Value *A = 0; ConstantInt *Cst = 0;
+ Value *A = nullptr; ConstantInt *Cst = nullptr;
if (Src->hasOneUse() &&
match(Src, m_LShr(m_ZExt(m_Value(A)), m_ConstantInt(Cst)))) {
// We have three types to worry about here, the type of A, the source of
// ASize < MidSize and MidSize > ResultSize, but don't know the relation
// between ASize and ResultSize.
unsigned ASize = A->getType()->getPrimitiveSizeInBits();
-
+
// If the shift amount is larger than the size of A, then the result is
// known to be zero because all the input bits got shifted out.
if (Cst->getZExtValue() >= ASize)
Shift->takeName(Src);
return CastInst::CreateIntegerCast(Shift, CI.getType(), false);
}
-
+
// Transform "trunc (and X, cst)" -> "and (trunc X), cst" so long as the dest
// type isn't non-native.
if (Src->hasOneUse() && isa<IntegerType>(Src->getType()) &&
ConstantExpr::getTrunc(Cst, CI.getType()));
}
- return 0;
+ return nullptr;
}
/// transformZExtICmp - Transform (zext icmp) to bitwise / integer operations
// cast to integer to avoid the comparison.
if (ConstantInt *Op1C = dyn_cast<ConstantInt>(ICI->getOperand(1))) {
const APInt &Op1CV = Op1C->getValue();
-
+
// zext (x <s 0) to i32 --> x>>u31 true if signbit set.
// zext (x >s -1) to i32 --> (x>>u31)^1 true if signbit clear.
if ((ICI->getPredicate() == ICmpInst::ICMP_SLT && Op1CV == 0) ||
// zext (X != 0) to i32 --> X>>1 iff X has only the 2nd bit set.
// zext (X != 1) to i32 --> X^1 iff X has only the low bit set.
// zext (X != 2) to i32 --> (X>>1)^1 iff X has only the 2nd bit set.
- if ((Op1CV == 0 || Op1CV.isPowerOf2()) &&
+ if ((Op1CV == 0 || Op1CV.isPowerOf2()) &&
// This only works for EQ and NE
ICI->isEquality()) {
// If Op1C some other power of two, convert:
uint32_t BitWidth = Op1C->getType()->getBitWidth();
APInt KnownZero(BitWidth, 0), KnownOne(BitWidth, 0);
- ComputeMaskedBits(ICI->getOperand(0), KnownZero, KnownOne);
-
+ computeKnownBits(ICI->getOperand(0), KnownZero, KnownOne);
+
APInt KnownZeroMask(~KnownZero);
if (KnownZeroMask.isPowerOf2()) { // Exactly 1 possible 1?
if (!DoXform) return ICI;
Res = ConstantExpr::getZExt(Res, CI.getType());
return ReplaceInstUsesWith(CI, Res);
}
-
+
uint32_t ShiftAmt = KnownZeroMask.logBase2();
Value *In = ICI->getOperand(0);
if (ShiftAmt) {
In = Builder->CreateLShr(In, ConstantInt::get(In->getType(),ShiftAmt),
In->getName()+".lobit");
}
-
+
if ((Op1CV != 0) == isNE) { // Toggle the low bit.
Constant *One = ConstantInt::get(In->getType(), 1);
In = Builder->CreateXor(In, One);
}
-
+
if (CI.getType() == In->getType())
return ReplaceInstUsesWith(CI, In);
return CastInst::CreateIntegerCast(In, CI.getType(), false/*ZExt*/);
APInt KnownZeroLHS(BitWidth, 0), KnownOneLHS(BitWidth, 0);
APInt KnownZeroRHS(BitWidth, 0), KnownOneRHS(BitWidth, 0);
- ComputeMaskedBits(LHS, KnownZeroLHS, KnownOneLHS);
- ComputeMaskedBits(RHS, KnownZeroRHS, KnownOneRHS);
+ computeKnownBits(LHS, KnownZeroLHS, KnownOneLHS);
+ computeKnownBits(RHS, KnownZeroRHS, KnownOneRHS);
if (KnownZeroLHS == KnownZeroRHS && KnownOneLHS == KnownOneRHS) {
APInt KnownBits = KnownZeroLHS | KnownOneLHS;
}
}
- return 0;
+ return nullptr;
}
/// CanEvaluateZExtd - Determine if the specified value can be computed in the
BitsToClear = 0;
if (isa<Constant>(V))
return true;
-
+
Instruction *I = dyn_cast<Instruction>(V);
if (!I) return false;
-
+
// If the input is a truncate from the destination type, we can trivially
// eliminate it.
if (isa<TruncInst>(I) && I->getOperand(0)->getType() == Ty)
return true;
-
+
// We can't extend or shrink something that has multiple uses: doing so would
// require duplicating the instruction in general, which isn't profitable.
if (!I->hasOneUse()) return false;
-
+
unsigned Opc = I->getOpcode(), Tmp;
switch (Opc) {
case Instruction::ZExt: // zext(zext(x)) -> zext(x).
case Instruction::Add:
case Instruction::Sub:
case Instruction::Mul:
- case Instruction::Shl:
if (!CanEvaluateZExtd(I->getOperand(0), Ty, BitsToClear) ||
!CanEvaluateZExtd(I->getOperand(1), Ty, Tmp))
return false;
// These can all be promoted if neither operand has 'bits to clear'.
if (BitsToClear == 0 && Tmp == 0)
return true;
-
+
// If the operation is an AND/OR/XOR and the bits to clear are zero in the
// other side, BitsToClear is ok.
if (Tmp == 0 &&
APInt::getHighBitsSet(VSize, BitsToClear)))
return true;
}
-
+
// Otherwise, we don't know how to analyze this BitsToClear case yet.
return false;
-
+
+ case Instruction::Shl:
+ // We can promote shl(x, cst) if we can promote x. Since shl overwrites the
+ // upper bits we can reduce BitsToClear by the shift amount.
+ if (ConstantInt *Amt = dyn_cast<ConstantInt>(I->getOperand(1))) {
+ if (!CanEvaluateZExtd(I->getOperand(0), Ty, BitsToClear))
+ return false;
+ uint64_t ShiftAmt = Amt->getZExtValue();
+ BitsToClear = ShiftAmt < BitsToClear ? BitsToClear - ShiftAmt : 0;
+ return true;
+ }
+ return false;
case Instruction::LShr:
// We can promote lshr(x, cst) if we can promote x. This requires the
// ultimate 'and' to clear out the high zero bits we're clearing out though.
Tmp != BitsToClear)
return false;
return true;
-
+
case Instruction::PHI: {
// We can change a phi if we can change all operands. Note that we never
// get into trouble with cyclic PHIs here because we only consider
}
Instruction *InstCombiner::visitZExt(ZExtInst &CI) {
- // If this zero extend is only used by a truncate, let the truncate by
+ // If this zero extend is only used by a truncate, let the truncate be
// eliminated before we try to optimize this zext.
- if (CI.hasOneUse() && isa<TruncInst>(CI.use_back()))
- return 0;
-
+ if (CI.hasOneUse() && isa<TruncInst>(CI.user_back()))
+ return nullptr;
+
// If one of the common conversion will work, do it.
if (Instruction *Result = commonCastTransforms(CI))
return Result;
- // See if we can simplify any instructions used by the input whose sole
+ // See if we can simplify any instructions used by the input whose sole
// purpose is to compute bits we don't care about.
if (SimplifyDemandedInstructionBits(CI))
return &CI;
-
+
Value *Src = CI.getOperand(0);
Type *SrcTy = Src->getType(), *DestTy = CI.getType();
-
+
// Attempt to extend the entire input expression tree to the destination
// type. Only do this if the dest type is a simple type, don't convert the
// expression tree to something weird like i93 unless the source is also
// strange.
unsigned BitsToClear;
if ((DestTy->isVectorTy() || ShouldChangeType(SrcTy, DestTy)) &&
- CanEvaluateZExtd(Src, DestTy, BitsToClear)) {
+ CanEvaluateZExtd(Src, DestTy, BitsToClear)) {
assert(BitsToClear < SrcTy->getScalarSizeInBits() &&
"Unreasonable BitsToClear");
-
+
// Okay, we can transform this! Insert the new expression now.
DEBUG(dbgs() << "ICE: EvaluateInDifferentType converting expression type"
" to avoid zero extend: " << CI);
Value *Res = EvaluateInDifferentType(Src, DestTy, false);
assert(Res->getType() == DestTy);
-
+
uint32_t SrcBitsKept = SrcTy->getScalarSizeInBits()-BitsToClear;
uint32_t DestBitSize = DestTy->getScalarSizeInBits();
-
+
// If the high bits are already filled with zeros, just replace this
// cast with the result.
if (MaskedValueIsZero(Res, APInt::getHighBitsSet(DestBitSize,
DestBitSize-SrcBitsKept)))
return ReplaceInstUsesWith(CI, Res);
-
+
// We need to emit an AND to clear the high bits.
Constant *C = ConstantInt::get(Res->getType(),
APInt::getLowBitsSet(DestBitSize, SrcBitsKept));
// 'and' which will be much cheaper than the pair of casts.
if (TruncInst *CSrc = dyn_cast<TruncInst>(Src)) { // A->B->C cast
// TODO: Subsume this into EvaluateInDifferentType.
-
+
// Get the sizes of the types involved. We know that the intermediate type
// will be smaller than A or C, but don't know the relation between A and C.
Value *A = CSrc->getOperand(0);
Value *And = Builder->CreateAnd(A, AndConst, CSrc->getName()+".mask");
return new ZExtInst(And, CI.getType());
}
-
+
if (SrcSize == DstSize) {
APInt AndValue(APInt::getLowBitsSet(SrcSize, MidSize));
return BinaryOperator::CreateAnd(A, ConstantInt::get(A->getType(),
if (SrcSize > DstSize) {
Value *Trunc = Builder->CreateTrunc(A, CI.getType());
APInt AndValue(APInt::getLowBitsSet(DstSize, MidSize));
- return BinaryOperator::CreateAnd(Trunc,
+ return BinaryOperator::CreateAnd(Trunc,
ConstantInt::get(Trunc->getType(),
AndValue));
}
}
}
- // zext(trunc(t) & C) -> (t & zext(C)).
- if (SrcI && SrcI->getOpcode() == Instruction::And && SrcI->hasOneUse())
- if (ConstantInt *C = dyn_cast<ConstantInt>(SrcI->getOperand(1)))
- if (TruncInst *TI = dyn_cast<TruncInst>(SrcI->getOperand(0))) {
- Value *TI0 = TI->getOperand(0);
- if (TI0->getType() == CI.getType())
- return
- BinaryOperator::CreateAnd(TI0,
- ConstantExpr::getZExt(C, CI.getType()));
- }
-
- // zext((trunc(t) & C) ^ C) -> ((t & zext(C)) ^ zext(C)).
- if (SrcI && SrcI->getOpcode() == Instruction::Xor && SrcI->hasOneUse())
- if (ConstantInt *C = dyn_cast<ConstantInt>(SrcI->getOperand(1)))
- if (BinaryOperator *And = dyn_cast<BinaryOperator>(SrcI->getOperand(0)))
- if (And->getOpcode() == Instruction::And && And->hasOneUse() &&
- And->getOperand(1) == C)
- if (TruncInst *TI = dyn_cast<TruncInst>(And->getOperand(0))) {
- Value *TI0 = TI->getOperand(0);
- if (TI0->getType() == CI.getType()) {
- Constant *ZC = ConstantExpr::getZExt(C, CI.getType());
- Value *NewAnd = Builder->CreateAnd(TI0, ZC);
- return BinaryOperator::CreateXor(NewAnd, ZC);
- }
- }
+ // zext(trunc(X) & C) -> (X & zext(C)).
+ Constant *C;
+ Value *X;
+ if (SrcI &&
+ match(SrcI, m_OneUse(m_And(m_Trunc(m_Value(X)), m_Constant(C)))) &&
+ X->getType() == CI.getType())
+ return BinaryOperator::CreateAnd(X, ConstantExpr::getZExt(C, CI.getType()));
+
+ // zext((trunc(X) & C) ^ C) -> ((X & zext(C)) ^ zext(C)).
+ Value *And;
+ if (SrcI && match(SrcI, m_OneUse(m_Xor(m_Value(And), m_Constant(C)))) &&
+ match(And, m_OneUse(m_And(m_Trunc(m_Value(X)), m_Specific(C)))) &&
+ X->getType() == CI.getType()) {
+ Constant *ZC = ConstantExpr::getZExt(C, CI.getType());
+ return BinaryOperator::CreateXor(Builder->CreateAnd(X, ZC), ZC);
+ }
// zext (xor i1 X, true) to i32 --> xor (zext i1 X to i32), 1
- Value *X;
- if (SrcI && SrcI->hasOneUse() && SrcI->getType()->isIntegerTy(1) &&
- match(SrcI, m_Not(m_Value(X))) &&
- (!X->hasOneUse() || !isa<CmpInst>(X))) {
+ if (SrcI && SrcI->hasOneUse() &&
+ SrcI->getType()->getScalarType()->isIntegerTy(1) &&
+ match(SrcI, m_Not(m_Value(X))) && (!X->hasOneUse() || !isa<CmpInst>(X))) {
Value *New = Builder->CreateZExt(X, CI.getType());
return BinaryOperator::CreateXor(New, ConstantInt::get(CI.getType(), 1));
}
-
- return 0;
+
+ return nullptr;
}
/// transformSExtICmp - Transform (sext icmp) to bitwise / integer operations
Value *Op0 = ICI->getOperand(0), *Op1 = ICI->getOperand(1);
ICmpInst::Predicate Pred = ICI->getPredicate();
- if (ConstantInt *Op1C = dyn_cast<ConstantInt>(Op1)) {
+ if (Constant *Op1C = dyn_cast<Constant>(Op1)) {
// (x <s 0) ? -1 : 0 -> ashr x, 31 -> all ones if negative
// (x >s -1) ? -1 : 0 -> not (ashr x, 31) -> all ones if positive
- if ((Pred == ICmpInst::ICMP_SLT && Op1C->isZero()) ||
+ if ((Pred == ICmpInst::ICMP_SLT && Op1C->isNullValue()) ||
(Pred == ICmpInst::ICMP_SGT && Op1C->isAllOnesValue())) {
Value *Sh = ConstantInt::get(Op0->getType(),
In = Builder->CreateNot(In, In->getName()+".not");
return ReplaceInstUsesWith(CI, In);
}
+ }
+ if (ConstantInt *Op1C = dyn_cast<ConstantInt>(Op1)) {
// If we know that only one bit of the LHS of the icmp can be set and we
// have an equality comparison with zero or a power of 2, we can transform
// the icmp and sext into bitwise/integer operations.
ICI->isEquality() && (Op1C->isZero() || Op1C->getValue().isPowerOf2())){
unsigned BitWidth = Op1C->getType()->getBitWidth();
APInt KnownZero(BitWidth, 0), KnownOne(BitWidth, 0);
- ComputeMaskedBits(Op0, KnownZero, KnownOne);
+ computeKnownBits(Op0, KnownZero, KnownOne);
APInt KnownZeroMask(~KnownZero);
if (KnownZeroMask.isPowerOf2()) {
}
}
- // vector (x <s 0) ? -1 : 0 -> ashr x, 31 -> all ones if signed.
- if (VectorType *VTy = dyn_cast<VectorType>(CI.getType())) {
- if (Pred == ICmpInst::ICMP_SLT && match(Op1, m_Zero()) &&
- Op0->getType() == CI.getType()) {
- Type *EltTy = VTy->getElementType();
-
- // splat the shift constant to a constant vector.
- Constant *VSh = ConstantInt::get(VTy, EltTy->getScalarSizeInBits()-1);
- Value *In = Builder->CreateAShr(Op0, VSh, Op0->getName()+".lobit");
- return ReplaceInstUsesWith(CI, In);
- }
- }
-
- return 0;
+ return nullptr;
}
/// CanEvaluateSExtd - Return true if we can take the specified value
// If this is a constant, it can be trivially promoted.
if (isa<Constant>(V))
return true;
-
+
Instruction *I = dyn_cast<Instruction>(V);
if (!I) return false;
-
+
// If this is a truncate from the dest type, we can trivially eliminate it.
if (isa<TruncInst>(I) && I->getOperand(0)->getType() == Ty)
return true;
-
+
// We can't extend or shrink something that has multiple uses: doing so would
// require duplicating the instruction in general, which isn't profitable.
if (!I->hasOneUse()) return false;
// These operators can all arbitrarily be extended if their inputs can.
return CanEvaluateSExtd(I->getOperand(0), Ty) &&
CanEvaluateSExtd(I->getOperand(1), Ty);
-
+
//case Instruction::Shl: TODO
//case Instruction::LShr: TODO
-
+
case Instruction::Select:
return CanEvaluateSExtd(I->getOperand(1), Ty) &&
CanEvaluateSExtd(I->getOperand(2), Ty);
-
+
case Instruction::PHI: {
// We can change a phi if we can change all operands. Note that we never
// get into trouble with cyclic PHIs here because we only consider
// TODO: Can handle more cases here.
break;
}
-
+
return false;
}
Instruction *InstCombiner::visitSExt(SExtInst &CI) {
- // If this sign extend is only used by a truncate, let the truncate by
- // eliminated before we try to optimize this zext.
- if (CI.hasOneUse() && isa<TruncInst>(CI.use_back()))
- return 0;
-
+ // If this sign extend is only used by a truncate, let the truncate be
+ // eliminated before we try to optimize this sext.
+ if (CI.hasOneUse() && isa<TruncInst>(CI.user_back()))
+ return nullptr;
+
if (Instruction *I = commonCastTransforms(CI))
return I;
-
- // See if we can simplify any instructions used by the input whose sole
+
+ // See if we can simplify any instructions used by the input whose sole
// purpose is to compute bits we don't care about.
if (SimplifyDemandedInstructionBits(CI))
return &CI;
-
+
Value *Src = CI.getOperand(0);
Type *SrcTy = Src->getType(), *DestTy = CI.getType();
// cast with the result.
if (ComputeNumSignBits(Res) > DestBitSize - SrcBitSize)
return ReplaceInstUsesWith(CI, Res);
-
+
// We need to emit a shl + ashr to do the sign extend.
Value *ShAmt = ConstantInt::get(DestTy, DestBitSize-SrcBitSize);
return BinaryOperator::CreateAShr(Builder->CreateShl(Res, ShAmt, "sext"),
if (TI->hasOneUse() && TI->getOperand(0)->getType() == DestTy) {
uint32_t SrcBitSize = SrcTy->getScalarSizeInBits();
uint32_t DestBitSize = DestTy->getScalarSizeInBits();
-
+
// We need to emit a shl + ashr to do the sign extend.
Value *ShAmt = ConstantInt::get(DestTy, DestBitSize-SrcBitSize);
Value *Res = Builder->CreateShl(TI->getOperand(0), ShAmt, "sext");
// into:
// %a = shl i32 %i, 30
// %d = ashr i32 %a, 30
- Value *A = 0;
+ Value *A = nullptr;
// TODO: Eventually this could be subsumed by EvaluateInDifferentType.
- ConstantInt *BA = 0, *CA = 0;
+ ConstantInt *BA = nullptr, *CA = nullptr;
if (match(Src, m_AShr(m_Shl(m_Trunc(m_Value(A)), m_ConstantInt(BA)),
m_ConstantInt(CA))) &&
BA == CA && A->getType() == CI.getType()) {
A = Builder->CreateShl(A, ShAmtV, CI.getName());
return BinaryOperator::CreateAShr(A, ShAmtV);
}
-
- return 0;
+
+ return nullptr;
}
(void)F.convert(Sem, APFloat::rmNearestTiesToEven, &losesInfo);
if (!losesInfo)
return ConstantFP::get(CFP->getContext(), F);
- return 0;
+ return nullptr;
}
/// LookThroughFPExtensions - If this is an fp extension instruction, look
if (Instruction *I = dyn_cast<Instruction>(V))
if (I->getOpcode() == Instruction::FPExt)
return LookThroughFPExtensions(I->getOperand(0));
-
+
// If this value is a constant, return the constant in the smallest FP type
// that can accurately represent it. This allows us to turn
// (float)((double)X+2.0) into x+2.0f.
return V;
// Don't try to shrink to various long double types.
}
-
+
return V;
}
Instruction *InstCombiner::visitFPTrunc(FPTruncInst &CI) {
if (Instruction *I = commonCastTransforms(CI))
return I;
-
- // If we have fptrunc(fadd (fpextend x), (fpextend y)), where x and y are
- // smaller than the destination type, we can eliminate the truncate by doing
- // the add as the smaller type. This applies to fadd/fsub/fmul/fdiv as well
- // as many builtins (sqrt, etc).
+ // If we have fptrunc(OpI (fpextend x), (fpextend y)), we would like to
+ // simpilify this expression to avoid one or more of the trunc/extend
+ // operations if we can do so without changing the numerical results.
+ //
+ // The exact manner in which the widths of the operands interact to limit
+ // what we can and cannot do safely varies from operation to operation, and
+ // is explained below in the various case statements.
BinaryOperator *OpI = dyn_cast<BinaryOperator>(CI.getOperand(0));
if (OpI && OpI->hasOneUse()) {
+ Value *LHSOrig = LookThroughFPExtensions(OpI->getOperand(0));
+ Value *RHSOrig = LookThroughFPExtensions(OpI->getOperand(1));
+ unsigned OpWidth = OpI->getType()->getFPMantissaWidth();
+ unsigned LHSWidth = LHSOrig->getType()->getFPMantissaWidth();
+ unsigned RHSWidth = RHSOrig->getType()->getFPMantissaWidth();
+ unsigned SrcWidth = std::max(LHSWidth, RHSWidth);
+ unsigned DstWidth = CI.getType()->getFPMantissaWidth();
switch (OpI->getOpcode()) {
- default: break;
- case Instruction::FAdd:
- case Instruction::FSub:
- case Instruction::FMul:
- case Instruction::FDiv:
- case Instruction::FRem:
- Type *SrcTy = OpI->getType();
- Value *LHSTrunc = LookThroughFPExtensions(OpI->getOperand(0));
- Value *RHSTrunc = LookThroughFPExtensions(OpI->getOperand(1));
- if (LHSTrunc->getType() != SrcTy &&
- RHSTrunc->getType() != SrcTy) {
- unsigned DstSize = CI.getType()->getScalarSizeInBits();
- // If the source types were both smaller than the destination type of
- // the cast, do this xform.
- if (LHSTrunc->getType()->getScalarSizeInBits() <= DstSize &&
- RHSTrunc->getType()->getScalarSizeInBits() <= DstSize) {
- LHSTrunc = Builder->CreateFPExt(LHSTrunc, CI.getType());
- RHSTrunc = Builder->CreateFPExt(RHSTrunc, CI.getType());
- return BinaryOperator::Create(OpI->getOpcode(), LHSTrunc, RHSTrunc);
+ default: break;
+ case Instruction::FAdd:
+ case Instruction::FSub:
+ // For addition and subtraction, the infinitely precise result can
+ // essentially be arbitrarily wide; proving that double rounding
+ // will not occur because the result of OpI is exact (as we will for
+ // FMul, for example) is hopeless. However, we *can* nonetheless
+ // frequently know that double rounding cannot occur (or that it is
+ // innocuous) by taking advantage of the specific structure of
+ // infinitely-precise results that admit double rounding.
+ //
+ // Specifically, if OpWidth >= 2*DstWdith+1 and DstWidth is sufficient
+ // to represent both sources, we can guarantee that the double
+ // rounding is innocuous (See p50 of Figueroa's 2000 PhD thesis,
+ // "A Rigorous Framework for Fully Supporting the IEEE Standard ..."
+ // for proof of this fact).
+ //
+ // Note: Figueroa does not consider the case where DstFormat !=
+ // SrcFormat. It's possible (likely even!) that this analysis
+ // could be tightened for those cases, but they are rare (the main
+ // case of interest here is (float)((double)float + float)).
+ if (OpWidth >= 2*DstWidth+1 && DstWidth >= SrcWidth) {
+ if (LHSOrig->getType() != CI.getType())
+ LHSOrig = Builder->CreateFPExt(LHSOrig, CI.getType());
+ if (RHSOrig->getType() != CI.getType())
+ RHSOrig = Builder->CreateFPExt(RHSOrig, CI.getType());
+ Instruction *RI =
+ BinaryOperator::Create(OpI->getOpcode(), LHSOrig, RHSOrig);
+ RI->copyFastMathFlags(OpI);
+ return RI;
+ }
+ break;
+ case Instruction::FMul:
+ // For multiplication, the infinitely precise result has at most
+ // LHSWidth + RHSWidth significant bits; if OpWidth is sufficient
+ // that such a value can be exactly represented, then no double
+ // rounding can possibly occur; we can safely perform the operation
+ // in the destination format if it can represent both sources.
+ if (OpWidth >= LHSWidth + RHSWidth && DstWidth >= SrcWidth) {
+ if (LHSOrig->getType() != CI.getType())
+ LHSOrig = Builder->CreateFPExt(LHSOrig, CI.getType());
+ if (RHSOrig->getType() != CI.getType())
+ RHSOrig = Builder->CreateFPExt(RHSOrig, CI.getType());
+ Instruction *RI =
+ BinaryOperator::CreateFMul(LHSOrig, RHSOrig);
+ RI->copyFastMathFlags(OpI);
+ return RI;
}
+ break;
+ case Instruction::FDiv:
+ // For division, we use again use the bound from Figueroa's
+ // dissertation. I am entirely certain that this bound can be
+ // tightened in the unbalanced operand case by an analysis based on
+ // the diophantine rational approximation bound, but the well-known
+ // condition used here is a good conservative first pass.
+ // TODO: Tighten bound via rigorous analysis of the unbalanced case.
+ if (OpWidth >= 2*DstWidth && DstWidth >= SrcWidth) {
+ if (LHSOrig->getType() != CI.getType())
+ LHSOrig = Builder->CreateFPExt(LHSOrig, CI.getType());
+ if (RHSOrig->getType() != CI.getType())
+ RHSOrig = Builder->CreateFPExt(RHSOrig, CI.getType());
+ Instruction *RI =
+ BinaryOperator::CreateFDiv(LHSOrig, RHSOrig);
+ RI->copyFastMathFlags(OpI);
+ return RI;
+ }
+ break;
+ case Instruction::FRem:
+ // Remainder is straightforward. Remainder is always exact, so the
+ // type of OpI doesn't enter into things at all. We simply evaluate
+ // in whichever source type is larger, then convert to the
+ // destination type.
+ if (LHSWidth < SrcWidth)
+ LHSOrig = Builder->CreateFPExt(LHSOrig, RHSOrig->getType());
+ else if (RHSWidth <= SrcWidth)
+ RHSOrig = Builder->CreateFPExt(RHSOrig, LHSOrig->getType());
+ Value *ExactResult = Builder->CreateFRem(LHSOrig, RHSOrig);
+ if (Instruction *RI = dyn_cast<Instruction>(ExactResult))
+ RI->copyFastMathFlags(OpI);
+ return CastInst::CreateFPCast(ExactResult, CI.getType());
+ }
+
+ // (fptrunc (fneg x)) -> (fneg (fptrunc x))
+ if (BinaryOperator::isFNeg(OpI)) {
+ Value *InnerTrunc = Builder->CreateFPTrunc(OpI->getOperand(1),
+ CI.getType());
+ Instruction *RI = BinaryOperator::CreateFNeg(InnerTrunc);
+ RI->copyFastMathFlags(OpI);
+ return RI;
+ }
+ }
+
+ // (fptrunc (select cond, R1, Cst)) -->
+ // (select cond, (fptrunc R1), (fptrunc Cst))
+ SelectInst *SI = dyn_cast<SelectInst>(CI.getOperand(0));
+ if (SI &&
+ (isa<ConstantFP>(SI->getOperand(1)) ||
+ isa<ConstantFP>(SI->getOperand(2)))) {
+ Value *LHSTrunc = Builder->CreateFPTrunc(SI->getOperand(1),
+ CI.getType());
+ Value *RHSTrunc = Builder->CreateFPTrunc(SI->getOperand(2),
+ CI.getType());
+ return SelectInst::Create(SI->getOperand(0), LHSTrunc, RHSTrunc);
+ }
+
+ IntrinsicInst *II = dyn_cast<IntrinsicInst>(CI.getOperand(0));
+ if (II) {
+ switch (II->getIntrinsicID()) {
+ default: break;
+ case Intrinsic::fabs: {
+ // (fptrunc (fabs x)) -> (fabs (fptrunc x))
+ Value *InnerTrunc = Builder->CreateFPTrunc(II->getArgOperand(0),
+ CI.getType());
+ Type *IntrinsicType[] = { CI.getType() };
+ Function *Overload =
+ Intrinsic::getDeclaration(CI.getParent()->getParent()->getParent(),
+ II->getIntrinsicID(), IntrinsicType);
+
+ Value *Args[] = { InnerTrunc };
+ return CallInst::Create(Overload, Args, II->getName());
}
- break;
}
}
-
+
// Fold (fptrunc (sqrt (fpext x))) -> (sqrtf x)
+ // Note that we restrict this transformation based on
+ // TLI->has(LibFunc::sqrtf), even for the sqrt intrinsic, because
+ // TLI->has(LibFunc::sqrtf) is sufficient to guarantee that the
+ // single-precision intrinsic can be expanded in the backend.
CallInst *Call = dyn_cast<CallInst>(CI.getOperand(0));
if (Call && Call->getCalledFunction() && TLI->has(LibFunc::sqrtf) &&
- Call->getCalledFunction()->getName() == TLI->getName(LibFunc::sqrt) &&
+ (Call->getCalledFunction()->getName() == TLI->getName(LibFunc::sqrt) ||
+ Call->getCalledFunction()->getIntrinsicID() == Intrinsic::sqrt) &&
Call->getNumArgOperands() == 1 &&
Call->hasOneUse()) {
CastInst *Arg = dyn_cast<CastInst>(Call->getArgOperand(0));
Arg->getOperand(0)->getType()->isFloatTy()) {
Function *Callee = Call->getCalledFunction();
Module *M = CI.getParent()->getParent()->getParent();
- Constant *SqrtfFunc = M->getOrInsertFunction("sqrtf",
- Callee->getAttributes(),
- Builder->getFloatTy(),
- Builder->getFloatTy(),
- NULL);
+ Constant *SqrtfFunc = (Callee->getIntrinsicID() == Intrinsic::sqrt) ?
+ Intrinsic::getDeclaration(M, Intrinsic::sqrt, Builder->getFloatTy()) :
+ M->getOrInsertFunction("sqrtf", Callee->getAttributes(),
+ Builder->getFloatTy(), Builder->getFloatTy(),
+ NULL);
CallInst *ret = CallInst::Create(SqrtfFunc, Arg->getOperand(0),
"sqrtfcall");
ret->setAttributes(Callee->getAttributes());
-
-
+
+
// Remove the old Call. With -fmath-errno, it won't get marked readnone.
ReplaceInstUsesWith(*Call, UndefValue::get(Call->getType()));
EraseInstFromFunction(*Call);
return ret;
}
}
-
- return 0;
+
+ return nullptr;
}
Instruction *InstCombiner::visitFPExt(CastInst &CI) {
Instruction *InstCombiner::visitFPToUI(FPToUIInst &FI) {
Instruction *OpI = dyn_cast<Instruction>(FI.getOperand(0));
- if (OpI == 0)
+ if (!OpI)
return commonCastTransforms(FI);
// fptoui(uitofp(X)) --> X
// This is safe if the intermediate type has enough bits in its mantissa to
// accurately represent all values of X. For example, do not do this with
// i64->float->i64. This is also safe for sitofp case, because any negative
- // 'X' value would cause an undefined result for the fptoui.
+ // 'X' value would cause an undefined result for the fptoui.
if ((isa<UIToFPInst>(OpI) || isa<SIToFPInst>(OpI)) &&
OpI->getOperand(0)->getType() == FI.getType() &&
(int)FI.getType()->getScalarSizeInBits() < /*extra bit for sign */
Instruction *InstCombiner::visitFPToSI(FPToSIInst &FI) {
Instruction *OpI = dyn_cast<Instruction>(FI.getOperand(0));
- if (OpI == 0)
+ if (!OpI)
return commonCastTransforms(FI);
-
+
// fptosi(sitofp(X)) --> X
// fptosi(uitofp(X)) --> X
// This is safe if the intermediate type has enough bits in its mantissa to
// accurately represent all values of X. For example, do not do this with
// i64->float->i64. This is also safe for sitofp case, because any negative
- // 'X' value would cause an undefined result for the fptoui.
+ // 'X' value would cause an undefined result for the fptoui.
if ((isa<UIToFPInst>(OpI) || isa<SIToFPInst>(OpI)) &&
OpI->getOperand(0)->getType() == FI.getType() &&
(int)FI.getType()->getScalarSizeInBits() <=
OpI->getType()->getFPMantissaWidth())
return ReplaceInstUsesWith(FI, OpI->getOperand(0));
-
+
return commonCastTransforms(FI);
}
// If the source integer type is not the intptr_t type for this target, do a
// trunc or zext to the intptr_t type, then inttoptr of it. This allows the
// cast to be exposed to other transforms.
- if (TD) {
- if (CI.getOperand(0)->getType()->getScalarSizeInBits() >
- TD->getPointerSizeInBits()) {
- Value *P = Builder->CreateTrunc(CI.getOperand(0),
- TD->getIntPtrType(CI.getContext()));
- return new IntToPtrInst(P, CI.getType());
- }
- if (CI.getOperand(0)->getType()->getScalarSizeInBits() <
- TD->getPointerSizeInBits()) {
- Value *P = Builder->CreateZExt(CI.getOperand(0),
- TD->getIntPtrType(CI.getContext()));
+
+ if (DL) {
+ unsigned AS = CI.getAddressSpace();
+ if (CI.getOperand(0)->getType()->getScalarSizeInBits() !=
+ DL->getPointerSizeInBits(AS)) {
+ Type *Ty = DL->getIntPtrType(CI.getContext(), AS);
+ if (CI.getType()->isVectorTy()) // Handle vectors of pointers.
+ Ty = VectorType::get(Ty, CI.getType()->getVectorNumElements());
+
+ Value *P = Builder->CreateZExtOrTrunc(CI.getOperand(0), Ty);
return new IntToPtrInst(P, CI.getType());
}
}
-
+
if (Instruction *I = commonCastTransforms(CI))
return I;
- return 0;
+ return nullptr;
}
/// @brief Implement the transforms for cast of pointer (bitcast/ptrtoint)
Instruction *InstCombiner::commonPointerCastTransforms(CastInst &CI) {
Value *Src = CI.getOperand(0);
-
+
if (GetElementPtrInst *GEP = dyn_cast<GetElementPtrInst>(Src)) {
// If casting the result of a getelementptr instruction with no offset, turn
// this into a cast of the original pointer!
- if (GEP->hasAllZeroIndices()) {
+ if (GEP->hasAllZeroIndices() &&
+ // If CI is an addrspacecast and GEP changes the poiner type, merging
+ // GEP into CI would undo canonicalizing addrspacecast with different
+ // pointer types, causing infinite loops.
+ (!isa<AddrSpaceCastInst>(CI) ||
+ GEP->getType() == GEP->getPointerOperand()->getType())) {
// Changing the cast operand is usually not a good idea but it is safe
- // here because the pointer operand is being replaced with another
+ // here because the pointer operand is being replaced with another
// pointer operand so the opcode doesn't need to change.
Worklist.Add(GEP);
CI.setOperand(0, GEP->getOperand(0));
return &CI;
}
-
+
+ if (!DL)
+ return commonCastTransforms(CI);
+
// If the GEP has a single use, and the base pointer is a bitcast, and the
// GEP computes a constant offset, see if we can convert these three
// instructions into fewer. This typically happens with unions and other
// non-type-safe code.
- APInt Offset(TD ? TD->getPointerSizeInBits() : 1, 0);
- if (TD && GEP->hasOneUse() && isa<BitCastInst>(GEP->getOperand(0)) &&
- GEP->accumulateConstantOffset(*TD, Offset)) {
+ unsigned AS = GEP->getPointerAddressSpace();
+ unsigned OffsetBits = DL->getPointerSizeInBits(AS);
+ APInt Offset(OffsetBits, 0);
+ BitCastInst *BCI = dyn_cast<BitCastInst>(GEP->getOperand(0));
+ if (GEP->hasOneUse() &&
+ BCI &&
+ GEP->accumulateConstantOffset(*DL, Offset)) {
// Get the base pointer input of the bitcast, and the type it points to.
- Value *OrigBase = cast<BitCastInst>(GEP->getOperand(0))->getOperand(0);
- Type *GEPIdxTy =
- cast<PointerType>(OrigBase->getType())->getElementType();
+ Value *OrigBase = BCI->getOperand(0);
SmallVector<Value*, 8> NewIndices;
- if (FindElementAtOffset(GEPIdxTy, Offset.getSExtValue(), NewIndices)) {
+ if (FindElementAtOffset(OrigBase->getType(),
+ Offset.getSExtValue(),
+ NewIndices)) {
// If we were able to index down into an element, create the GEP
// and bitcast the result. This eliminates one bitcast, potentially
// two.
Value *NGEP = cast<GEPOperator>(GEP)->isInBounds() ?
- Builder->CreateInBoundsGEP(OrigBase, NewIndices) :
- Builder->CreateGEP(OrigBase, NewIndices);
+ Builder->CreateInBoundsGEP(OrigBase, NewIndices) :
+ Builder->CreateGEP(OrigBase, NewIndices);
NGEP->takeName(GEP);
-
+
if (isa<BitCastInst>(CI))
return new BitCastInst(NGEP, CI.getType());
assert(isa<PtrToIntInst>(CI));
return new PtrToIntInst(NGEP, CI.getType());
- }
+ }
}
}
-
+
return commonCastTransforms(CI);
}
// If the destination integer type is not the intptr_t type for this target,
// do a ptrtoint to intptr_t then do a trunc or zext. This allows the cast
// to be exposed to other transforms.
- if (TD) {
- if (CI.getType()->getScalarSizeInBits() < TD->getPointerSizeInBits()) {
- Value *P = Builder->CreatePtrToInt(CI.getOperand(0),
- TD->getIntPtrType(CI.getContext()));
- return new TruncInst(P, CI.getType());
- }
- if (CI.getType()->getScalarSizeInBits() > TD->getPointerSizeInBits()) {
- Value *P = Builder->CreatePtrToInt(CI.getOperand(0),
- TD->getIntPtrType(CI.getContext()));
- return new ZExtInst(P, CI.getType());
- }
- }
-
- return commonPointerCastTransforms(CI);
+
+ if (!DL)
+ return commonPointerCastTransforms(CI);
+
+ Type *Ty = CI.getType();
+ unsigned AS = CI.getPointerAddressSpace();
+
+ if (Ty->getScalarSizeInBits() == DL->getPointerSizeInBits(AS))
+ return commonPointerCastTransforms(CI);
+
+ Type *PtrTy = DL->getIntPtrType(CI.getContext(), AS);
+ if (Ty->isVectorTy()) // Handle vectors of pointers.
+ PtrTy = VectorType::get(PtrTy, Ty->getVectorNumElements());
+
+ Value *P = Builder->CreatePtrToInt(CI.getOperand(0), PtrTy);
+ return CastInst::CreateIntegerCast(P, Ty, /*isSigned=*/false);
}
/// OptimizeVectorResize - This input value (which is known to have vector type)
// element size, or the input is a multiple of the output element size.
// Convert the input type to have the same element type as the output.
VectorType *SrcTy = cast<VectorType>(InVal->getType());
-
+
if (SrcTy->getElementType() != DestTy->getElementType()) {
// The input types don't need to be identical, but for now they must be the
// same size. There is no specific reason we couldn't handle things like
// <4 x i16> -> <4 x i32> by bitcasting to <2 x i32> but haven't gotten
- // there yet.
+ // there yet.
if (SrcTy->getElementType()->getPrimitiveSizeInBits() !=
DestTy->getElementType()->getPrimitiveSizeInBits())
- return 0;
-
+ return nullptr;
+
SrcTy = VectorType::get(DestTy->getElementType(), SrcTy->getNumElements());
InVal = IC.Builder->CreateBitCast(InVal, SrcTy);
}
-
+
// Now that the element types match, get the shuffle mask and RHS of the
// shuffle to use, which depends on whether we're increasing or decreasing the
// size of the input.
SmallVector<uint32_t, 16> ShuffleMask;
Value *V2;
-
+
if (SrcTy->getNumElements() > DestTy->getNumElements()) {
// If we're shrinking the number of elements, just shuffle in the low
// elements from the input and use undef as the second shuffle input.
V2 = UndefValue::get(SrcTy);
for (unsigned i = 0, e = DestTy->getNumElements(); i != e; ++i)
ShuffleMask.push_back(i);
-
+
} else {
// If we're increasing the number of elements, shuffle in all of the
// elements from InVal and fill the rest of the result elements with zeros
for (unsigned i = 0, e = DestTy->getNumElements()-SrcElts; i != e; ++i)
ShuffleMask.push_back(SrcElts);
}
-
+
return new ShuffleVectorInst(InVal, V2,
ConstantDataVector::get(V2->getContext(),
ShuffleMask));
/// insertions into the vector. See the example in the comment for
/// OptimizeIntegerToVectorInsertions for the pattern this handles.
/// The type of V is always a non-zero multiple of VecEltTy's size.
+/// Shift is the number of bits between the lsb of V and the lsb of
+/// the vector.
///
/// This returns false if the pattern can't be matched or true if it can,
/// filling in Elements with the elements found here.
-static bool CollectInsertionElements(Value *V, unsigned ElementIndex,
+static bool CollectInsertionElements(Value *V, unsigned Shift,
SmallVectorImpl<Value*> &Elements,
- Type *VecEltTy) {
+ Type *VecEltTy, InstCombiner &IC) {
+ assert(isMultipleOfTypeSize(Shift, VecEltTy) &&
+ "Shift should be a multiple of the element type size");
+
// Undef values never contribute useful bits to the result.
if (isa<UndefValue>(V)) return true;
-
+
// If we got down to a value of the right type, we win, try inserting into the
// right element.
if (V->getType() == VecEltTy) {
if (Constant *C = dyn_cast<Constant>(V))
if (C->isNullValue())
return true;
-
+
+ unsigned ElementIndex = getTypeSizeIndex(Shift, VecEltTy);
+ if (IC.getDataLayout()->isBigEndian())
+ ElementIndex = Elements.size() - ElementIndex - 1;
+
// Fail if multiple elements are inserted into this slot.
- if (ElementIndex >= Elements.size() || Elements[ElementIndex] != 0)
+ if (Elements[ElementIndex])
return false;
-
+
Elements[ElementIndex] = V;
return true;
}
-
+
if (Constant *C = dyn_cast<Constant>(V)) {
// Figure out the # elements this provides, and bitcast it or slice it up
// as required.
// it to the right type so it gets properly inserted.
if (NumElts == 1)
return CollectInsertionElements(ConstantExpr::getBitCast(C, VecEltTy),
- ElementIndex, Elements, VecEltTy);
-
+ Shift, Elements, VecEltTy, IC);
+
// Okay, this is a constant that covers multiple elements. Slice it up into
// pieces and insert each element-sized piece into the vector.
if (!isa<IntegerType>(C->getType()))
C->getType()->getPrimitiveSizeInBits()));
unsigned ElementSize = VecEltTy->getPrimitiveSizeInBits();
Type *ElementIntTy = IntegerType::get(C->getContext(), ElementSize);
-
+
for (unsigned i = 0; i != NumElts; ++i) {
+ unsigned ShiftI = Shift+i*ElementSize;
Constant *Piece = ConstantExpr::getLShr(C, ConstantInt::get(C->getType(),
- i*ElementSize));
+ ShiftI));
Piece = ConstantExpr::getTrunc(Piece, ElementIntTy);
- if (!CollectInsertionElements(Piece, ElementIndex+i, Elements, VecEltTy))
+ if (!CollectInsertionElements(Piece, ShiftI, Elements, VecEltTy, IC))
return false;
}
return true;
}
-
+
if (!V->hasOneUse()) return false;
-
+
Instruction *I = dyn_cast<Instruction>(V);
- if (I == 0) return false;
+ if (!I) return false;
switch (I->getOpcode()) {
default: return false; // Unhandled case.
case Instruction::BitCast:
- return CollectInsertionElements(I->getOperand(0), ElementIndex,
- Elements, VecEltTy);
+ return CollectInsertionElements(I->getOperand(0), Shift,
+ Elements, VecEltTy, IC);
case Instruction::ZExt:
if (!isMultipleOfTypeSize(
I->getOperand(0)->getType()->getPrimitiveSizeInBits(),
VecEltTy))
return false;
- return CollectInsertionElements(I->getOperand(0), ElementIndex,
- Elements, VecEltTy);
+ return CollectInsertionElements(I->getOperand(0), Shift,
+ Elements, VecEltTy, IC);
case Instruction::Or:
- return CollectInsertionElements(I->getOperand(0), ElementIndex,
- Elements, VecEltTy) &&
- CollectInsertionElements(I->getOperand(1), ElementIndex,
- Elements, VecEltTy);
+ return CollectInsertionElements(I->getOperand(0), Shift,
+ Elements, VecEltTy, IC) &&
+ CollectInsertionElements(I->getOperand(1), Shift,
+ Elements, VecEltTy, IC);
case Instruction::Shl: {
// Must be shifting by a constant that is a multiple of the element size.
ConstantInt *CI = dyn_cast<ConstantInt>(I->getOperand(1));
- if (CI == 0) return false;
- if (!isMultipleOfTypeSize(CI->getZExtValue(), VecEltTy)) return false;
- unsigned IndexShift = getTypeSizeIndex(CI->getZExtValue(), VecEltTy);
-
- return CollectInsertionElements(I->getOperand(0), ElementIndex+IndexShift,
- Elements, VecEltTy);
+ if (!CI) return false;
+ Shift += CI->getZExtValue();
+ if (!isMultipleOfTypeSize(Shift, VecEltTy)) return false;
+ return CollectInsertionElements(I->getOperand(0), Shift,
+ Elements, VecEltTy, IC);
}
-
+
}
}
/// Into two insertelements that do "buildvector{%inc, %inc5}".
static Value *OptimizeIntegerToVectorInsertions(BitCastInst &CI,
InstCombiner &IC) {
+ // We need to know the target byte order to perform this optimization.
+ if (!IC.getDataLayout()) return nullptr;
+
VectorType *DestVecTy = cast<VectorType>(CI.getType());
Value *IntInput = CI.getOperand(0);
SmallVector<Value*, 8> Elements(DestVecTy->getNumElements());
if (!CollectInsertionElements(IntInput, 0, Elements,
- DestVecTy->getElementType()))
- return 0;
+ DestVecTy->getElementType(), IC))
+ return nullptr;
// If we succeeded, we know that all of the element are specified by Elements
// or are zero if Elements has a null entry. Recast this as a set of
// insertions.
Value *Result = Constant::getNullValue(CI.getType());
for (unsigned i = 0, e = Elements.size(); i != e; ++i) {
- if (Elements[i] == 0) continue; // Unset element.
-
+ if (!Elements[i]) continue; // Unset element.
+
Result = IC.Builder->CreateInsertElement(Result, Elements[i],
IC.Builder->getInt32(i));
}
-
+
return Result;
}
/// OptimizeIntToFloatBitCast - See if we can optimize an integer->float/double
/// bitcast. The various long double bitcasts can't get in here.
static Instruction *OptimizeIntToFloatBitCast(BitCastInst &CI,InstCombiner &IC){
+ // We need to know the target byte order to perform this optimization.
+ if (!IC.getDataLayout()) return nullptr;
+
Value *Src = CI.getOperand(0);
Type *DestTy = CI.getType();
// If this is a bitcast from int to float, check to see if the int is an
// extraction from a vector.
- Value *VecInput = 0;
+ Value *VecInput = nullptr;
// bitcast(trunc(bitcast(somevector)))
if (match(Src, m_Trunc(m_BitCast(m_Value(VecInput)))) &&
isa<VectorType>(VecInput->getType())) {
VecTy->getPrimitiveSizeInBits() / DestWidth);
VecInput = IC.Builder->CreateBitCast(VecInput, VecTy);
}
-
- return ExtractElementInst::Create(VecInput, IC.Builder->getInt32(0));
+
+ unsigned Elt = 0;
+ if (IC.getDataLayout()->isBigEndian())
+ Elt = VecTy->getPrimitiveSizeInBits() / DestWidth - 1;
+ return ExtractElementInst::Create(VecInput, IC.Builder->getInt32(Elt));
}
}
-
+
// bitcast(trunc(lshr(bitcast(somevector), cst))
- ConstantInt *ShAmt = 0;
+ ConstantInt *ShAmt = nullptr;
if (match(Src, m_Trunc(m_LShr(m_BitCast(m_Value(VecInput)),
m_ConstantInt(ShAmt)))) &&
isa<VectorType>(VecInput->getType())) {
VecTy->getPrimitiveSizeInBits() / DestWidth);
VecInput = IC.Builder->CreateBitCast(VecInput, VecTy);
}
-
+
unsigned Elt = ShAmt->getZExtValue() / DestWidth;
+ if (IC.getDataLayout()->isBigEndian())
+ Elt = VecTy->getPrimitiveSizeInBits() / DestWidth - 1 - Elt;
return ExtractElementInst::Create(VecInput, IC.Builder->getInt32(Elt));
}
}
- return 0;
+ return nullptr;
}
Instruction *InstCombiner::visitBitCast(BitCastInst &CI) {
PointerType *SrcPTy = cast<PointerType>(SrcTy);
Type *DstElTy = DstPTy->getElementType();
Type *SrcElTy = SrcPTy->getElementType();
-
- // If the address spaces don't match, don't eliminate the bitcast, which is
- // required for changing types.
- if (SrcPTy->getAddressSpace() != DstPTy->getAddressSpace())
- return 0;
-
+
// If we are casting a alloca to a pointer to a type of the same
// size, rewrite the allocation instruction to allocate the "right" type.
// There is no need to modify malloc calls because it is their bitcast that
if (AllocaInst *AI = dyn_cast<AllocaInst>(Src))
if (Instruction *V = PromoteCastOfAllocation(CI, *AI))
return V;
-
+
// If the source and destination are pointers, and this cast is equivalent
// to a getelementptr X, 0, 0, 0... turn it into the appropriate gep.
// This can enhance SROA and other transforms that want type-safe pointers.
Constant *ZeroUInt =
Constant::getNullValue(Type::getInt32Ty(CI.getContext()));
unsigned NumZeros = 0;
- while (SrcElTy != DstElTy &&
+ while (SrcElTy != DstElTy &&
isa<CompositeType>(SrcElTy) && !SrcElTy->isPointerTy() &&
SrcElTy->getNumContainedTypes() /* not "{}" */) {
SrcElTy = cast<CompositeType>(SrcElTy)->getTypeAtIndex(ZeroUInt);
return GetElementPtrInst::CreateInBounds(Src, Idxs);
}
}
-
+
// Try to optimize int -> float bitcasts.
if ((DestTy->isFloatTy() || DestTy->isDoubleTy()) && isa<IntegerType>(SrcTy))
if (Instruction *I = OptimizeIntToFloatBitCast(CI, *this))
Constant::getNullValue(Type::getInt32Ty(CI.getContext())));
// FIXME: Canonicalize bitcast(insertelement) -> insertelement(bitcast)
}
-
+
if (isa<IntegerType>(SrcTy)) {
// If this is a cast from an integer to vector, check to see if the input
// is a trunc or zext of a bitcast from vector. If so, we can replace all
cast<VectorType>(DestTy), *this))
return I;
}
-
+
// If the input is an 'or' instruction, we may be doing shifts and ors to
// assemble the elements of the vector manually. Try to rip the code out
// and replace it with insertelements.
}
if (VectorType *SrcVTy = dyn_cast<VectorType>(SrcTy)) {
- if (SrcVTy->getNumElements() == 1 && !DestTy->isVectorTy()) {
- Value *Elem =
- Builder->CreateExtractElement(Src,
- Constant::getNullValue(Type::getInt32Ty(CI.getContext())));
- return CastInst::Create(Instruction::BitCast, Elem, DestTy);
+ if (SrcVTy->getNumElements() == 1) {
+ // If our destination is not a vector, then make this a straight
+ // scalar-scalar cast.
+ if (!DestTy->isVectorTy()) {
+ Value *Elem =
+ Builder->CreateExtractElement(Src,
+ Constant::getNullValue(Type::getInt32Ty(CI.getContext())));
+ return CastInst::Create(Instruction::BitCast, Elem, DestTy);
+ }
+
+ // Otherwise, see if our source is an insert. If so, then use the scalar
+ // component directly.
+ if (InsertElementInst *IEI =
+ dyn_cast<InsertElementInst>(CI.getOperand(0)))
+ return CastInst::Create(Instruction::BitCast, IEI->getOperand(1),
+ DestTy);
}
}
if (ShuffleVectorInst *SVI = dyn_cast<ShuffleVectorInst>(Src)) {
// Okay, we have (bitcast (shuffle ..)). Check to see if this is
// a bitcast to a vector with the same # elts.
- if (SVI->hasOneUse() && DestTy->isVectorTy() &&
- cast<VectorType>(DestTy)->getNumElements() ==
- SVI->getType()->getNumElements() &&
+ if (SVI->hasOneUse() && DestTy->isVectorTy() &&
+ DestTy->getVectorNumElements() == SVI->getType()->getNumElements() &&
SVI->getType()->getNumElements() ==
- cast<VectorType>(SVI->getOperand(0)->getType())->getNumElements()) {
+ SVI->getOperand(0)->getType()->getVectorNumElements()) {
BitCastInst *Tmp;
// If either of the operands is a cast from CI.getType(), then
// evaluating the shuffle in the casted destination's type will allow
// us to eliminate at least one cast.
- if (((Tmp = dyn_cast<BitCastInst>(SVI->getOperand(0))) &&
+ if (((Tmp = dyn_cast<BitCastInst>(SVI->getOperand(0))) &&
Tmp->getOperand(0)->getType() == DestTy) ||
- ((Tmp = dyn_cast<BitCastInst>(SVI->getOperand(1))) &&
+ ((Tmp = dyn_cast<BitCastInst>(SVI->getOperand(1))) &&
Tmp->getOperand(0)->getType() == DestTy)) {
Value *LHS = Builder->CreateBitCast(SVI->getOperand(0), DestTy);
Value *RHS = Builder->CreateBitCast(SVI->getOperand(1), DestTy);
}
}
}
-
+
if (SrcTy->isPointerTy())
return commonPointerCastTransforms(CI);
return commonCastTransforms(CI);
}
+
+Instruction *InstCombiner::visitAddrSpaceCast(AddrSpaceCastInst &CI) {
+ // If the destination pointer element type is not the the same as the source's
+ // do the addrspacecast to the same type, and then the bitcast in the new
+ // address space. This allows the cast to be exposed to other transforms.
+ Value *Src = CI.getOperand(0);
+ PointerType *SrcTy = cast<PointerType>(Src->getType()->getScalarType());
+ PointerType *DestTy = cast<PointerType>(CI.getType()->getScalarType());
+
+ Type *DestElemTy = DestTy->getElementType();
+ if (SrcTy->getElementType() != DestElemTy) {
+ Type *MidTy = PointerType::get(DestElemTy, SrcTy->getAddressSpace());
+ if (CI.getType()->isVectorTy()) // Handle vectors of pointers.
+ MidTy = VectorType::get(MidTy, CI.getType()->getVectorNumElements());
+
+ Value *NewBitCast = Builder->CreateBitCast(Src, MidTy);
+ return new AddrSpaceCastInst(NewBitCast, CI.getType());
+ }
+
+ return commonPointerCastTransforms(CI);
+}