#include "X86RegisterInfo.h"
namespace llvm {
+ class X86RegisterInfo;
+ class X86TargetMachine;
+
+namespace X86 {
+ // X86 specific condition code. These correspond to X86_*_COND in
+ // X86InstrInfo.td. They must be kept in synch.
+ enum CondCode {
+ COND_A = 0,
+ COND_AE = 1,
+ COND_B = 2,
+ COND_BE = 3,
+ COND_E = 4,
+ COND_G = 5,
+ COND_GE = 6,
+ COND_L = 7,
+ COND_LE = 8,
+ COND_NE = 9,
+ COND_NO = 10,
+ COND_NP = 11,
+ COND_NS = 12,
+ COND_O = 13,
+ COND_P = 14,
+ COND_S = 15,
+ COND_INVALID
+ };
+
+ // Turn condition code into conditional branch opcode.
+ unsigned GetCondBranchFromCond(CondCode CC);
+
+ /// GetOppositeBranchCondition - Return the inverse of the specified cond,
+ /// e.g. turning COND_E to COND_NE.
+ CondCode GetOppositeBranchCondition(X86::CondCode CC);
+}
+
/// X86II - This namespace holds all of the target specific flags that
/// instruction info tracks.
///
// instead of 32 bit data.
OpSize = 1 << 6,
+ // AsSize - Set if this instruction requires an operand size prefix (0x67),
+ // which most often indicates that the instruction address 16 bit address
+ // instead of 32 bit address (or 32 bit address in 64 bit mode).
+ AdSize = 1 << 7,
+
+ //===------------------------------------------------------------------===//
// Op0Mask - There are several prefix bytes that are used to form two byte
// opcodes. These are currently 0x0F, 0xF3, and 0xD8-0xDF. This mask is
// used to obtain the setting of this field. If no bits in this field is
// set, there is no prefix byte for obtaining a multibyte opcode.
//
- Op0Shift = 7,
+ Op0Shift = 8,
Op0Mask = 0xF << Op0Shift,
// TB - TwoByte - Set if this instruction has a two byte opcode, which
// XS, XD - These prefix codes are for single and double precision scalar
// floating point operations performed in the SSE registers.
- XD = 11 << Op0Shift, XS = 12 << Op0Shift,
+ XD = 11 << Op0Shift, XS = 12 << Op0Shift,
+
+ // T8, TA - Prefix after the 0x0F prefix.
+ T8 = 13 << Op0Shift, TA = 14 << Op0Shift,
+
+ //===------------------------------------------------------------------===//
+ // REX_W - REX prefixes are instruction prefixes used in 64-bit mode.
+ // They are used to specify GPRs and SSE registers, 64-bit operand size,
+ // etc. We only cares about REX.W and REX.R bits and only the former is
+ // statically determined.
+ //
+ REXShift = 12,
+ REX_W = 1 << REXShift,
//===------------------------------------------------------------------===//
- // This two-bit field describes the size of an immediate operand. Zero is
+ // This three-bit field describes the size of an immediate operand. Zero is
// unused so that we can tell if we forgot to set a value.
- ImmShift = 11,
+ ImmShift = 13,
ImmMask = 7 << ImmShift,
Imm8 = 1 << ImmShift,
Imm16 = 2 << ImmShift,
Imm32 = 3 << ImmShift,
+ Imm64 = 4 << ImmShift,
//===------------------------------------------------------------------===//
// FP Instruction Classification... Zero is non-fp instruction.
// FPTypeMask - Mask for all of the FP types...
- FPTypeShift = 13,
+ FPTypeShift = 16,
FPTypeMask = 7 << FPTypeShift,
// NotFP - The default, set for instructions that do not use FP registers.
// SpecialFP - Special instruction forms. Dispatch by opcode explicitly.
SpecialFP = 7 << FPTypeShift,
- // Bit 15 is unused.
- OpcodeShift = 17,
- OpcodeMask = 0xFF << OpcodeShift,
- // Bits 25 -> 31 are unused
+ // Bits 19 -> 23 are unused
+ OpcodeShift = 24,
+ OpcodeMask = 0xFF << OpcodeShift
};
}
class X86InstrInfo : public TargetInstrInfo {
+ X86TargetMachine &TM;
const X86RegisterInfo RI;
public:
- X86InstrInfo();
+ X86InstrInfo(X86TargetMachine &tm);
/// getRegisterInfo - TargetInstrInfo is a superset of MRegister info. As
/// such, whenever a client has an instance of instruction info, it should
unsigned& destReg) const;
unsigned isLoadFromStackSlot(MachineInstr *MI, int &FrameIndex) const;
unsigned isStoreToStackSlot(MachineInstr *MI, int &FrameIndex) const;
+ bool isReallyTriviallyReMaterializable(MachineInstr *MI) const;
/// convertToThreeAddress - This method must be implemented by targets that
/// set the M_CONVERTIBLE_TO_3_ADDR flag. When this flag is set, the target
/// This method returns a null pointer if the transformation cannot be
/// performed, otherwise it returns the new instruction.
///
- virtual MachineInstr *convertToThreeAddress(MachineInstr *TA) const;
+ virtual MachineInstr *convertToThreeAddress(MachineFunction::iterator &MFI,
+ MachineBasicBlock::iterator &MBBI,
+ LiveVariables &LV) const;
/// commuteInstruction - We have a few instructions that must be hacked on to
/// commute them.
///
virtual MachineInstr *commuteInstruction(MachineInstr *MI) const;
+ // Branch analysis.
+ virtual bool isUnpredicatedTerminator(const MachineInstr* MI) const;
+ virtual bool AnalyzeBranch(MachineBasicBlock &MBB, MachineBasicBlock *&TBB,
+ MachineBasicBlock *&FBB,
+ std::vector<MachineOperand> &Cond) const;
+ virtual unsigned RemoveBranch(MachineBasicBlock &MBB) const;
+ virtual unsigned InsertBranch(MachineBasicBlock &MBB, MachineBasicBlock *TBB,
+ MachineBasicBlock *FBB,
+ const std::vector<MachineOperand> &Cond) const;
+ virtual bool BlockHasNoFallThrough(MachineBasicBlock &MBB) const;
+ virtual bool ReverseBranchCondition(std::vector<MachineOperand> &Cond) const;
- /// Insert a goto (unconditional branch) sequence to TMBB, at the
- /// end of MBB
- virtual void insertGoto(MachineBasicBlock& MBB,
- MachineBasicBlock& TMBB) const;
-
- /// Reverses the branch condition of the MachineInstr pointed by
- /// MI. The instruction is replaced and the new MI is returned.
- virtual MachineBasicBlock::iterator
- reverseBranchCondition(MachineBasicBlock::iterator MI) const;
+ const TargetRegisterClass *getPointerRegClass() const;
// getBaseOpcodeFor - This function returns the "base" X86 opcode for the
// specified opcode number.
//
- unsigned char getBaseOpcodeFor(unsigned Opcode) const {
- return get(Opcode).TSFlags >> X86II::OpcodeShift;
+ unsigned char getBaseOpcodeFor(const TargetInstrDescriptor *TID) const {
+ return TID->TSFlags >> X86II::OpcodeShift;
}
};
projects / oota-llvm.git / blobdiff