X86TargetLowering::X86TargetLowering(X86TargetMachine &TM)
: TargetLowering(TM, createTLOF(TM)) {
Subtarget = &TM.getSubtarget<X86Subtarget>();
- X86ScalarSSEf64 = Subtarget->hasXMMInt();
- X86ScalarSSEf32 = Subtarget->hasXMM();
+ X86ScalarSSEf64 = Subtarget->hasSSE2();
+ X86ScalarSSEf32 = Subtarget->hasSSE1();
X86StackPtr = Subtarget->is64Bit() ? X86::RSP : X86::ESP;
RegInfo = TM.getRegisterInfo();
setOperationAction(ISD::SRL_PARTS , MVT::i64 , Custom);
}
- if (Subtarget->hasXMM())
+ if (Subtarget->hasSSE1())
setOperationAction(ISD::PREFETCH , MVT::Other, Legal);
setOperationAction(ISD::MEMBARRIER , MVT::Other, Custom);
setOperationAction(ISD::BITCAST, MVT::v2i32, Expand);
setOperationAction(ISD::BITCAST, MVT::v1i64, Expand);
- if (!TM.Options.UseSoftFloat && Subtarget->hasXMM()) {
+ if (!TM.Options.UseSoftFloat && Subtarget->hasSSE1()) {
addRegisterClass(MVT::v4f32, X86::VR128RegisterClass);
setOperationAction(ISD::FADD, MVT::v4f32, Legal);
setOperationAction(ISD::SETCC, MVT::v4f32, Custom);
}
- if (!TM.Options.UseSoftFloat && Subtarget->hasXMMInt()) {
+ if (!TM.Options.UseSoftFloat && Subtarget->hasSSE2()) {
addRegisterClass(MVT::v2f64, X86::VR128RegisterClass);
// FIXME: Unfortunately -soft-float and -no-implicit-float means XMM
}
}
- if (Subtarget->hasXMMInt()) {
+ if (Subtarget->hasSSE2()) {
setOperationAction(ISD::SRL, MVT::v8i16, Custom);
setOperationAction(ISD::SRL, MVT::v16i8, Custom);
}
unsigned Align = 4;
- if (Subtarget->hasXMM())
+ if (Subtarget->hasSSE1())
getMaxByValAlign(Ty, Align);
return Align;
}
if (Subtarget->hasAVX() &&
Subtarget->getStackAlignment() >= 32)
return MVT::v8f32;
- if (Subtarget->hasXMMInt())
+ if (Subtarget->hasSSE2())
return MVT::v4i32;
- if (Subtarget->hasXMM())
+ if (Subtarget->hasSSE1())
return MVT::v4f32;
} else if (!MemcpyStrSrc && Size >= 8 &&
!Subtarget->is64Bit() &&
Subtarget->getStackAlignment() >= 8 &&
- Subtarget->hasXMMInt()) {
+ Subtarget->hasSSE2()) {
// Do not use f64 to lower memcpy if source is string constant. It's
// better to use i32 to avoid the loads.
return MVT::f64;
// or SSE or MMX vectors.
if ((ValVT == MVT::f32 || ValVT == MVT::f64 ||
VA.getLocReg() == X86::XMM0 || VA.getLocReg() == X86::XMM1) &&
- (Subtarget->is64Bit() && !Subtarget->hasXMM())) {
+ (Subtarget->is64Bit() && !Subtarget->hasSSE1())) {
report_fatal_error("SSE register return with SSE disabled");
}
// Likewise we can't return F64 values with SSE1 only. gcc does so, but
// llvm-gcc has never done it right and no one has noticed, so this
// should be OK for now.
if (ValVT == MVT::f64 &&
- (Subtarget->is64Bit() && !Subtarget->hasXMMInt()))
+ (Subtarget->is64Bit() && !Subtarget->hasSSE2()))
report_fatal_error("SSE2 register return with SSE2 disabled");
// Returns in ST0/ST1 are handled specially: these are pushed as operands to
ValToCopy);
// If we don't have SSE2 available, convert to v4f32 so the generated
// register is legal.
- if (!Subtarget->hasXMMInt())
+ if (!Subtarget->hasSSE2())
ValToCopy = DAG.getNode(ISD::BITCAST, dl, MVT::v4f32,ValToCopy);
}
}
// If this is x86-64, and we disabled SSE, we can't return FP values
if ((CopyVT == MVT::f32 || CopyVT == MVT::f64) &&
- ((Is64Bit || Ins[i].Flags.isInReg()) && !Subtarget->hasXMM())) {
+ ((Is64Bit || Ins[i].Flags.isInReg()) && !Subtarget->hasSSE1())) {
report_fatal_error("SSE register return with SSE disabled");
}
TotalNumIntRegs);
bool NoImplicitFloatOps = Fn->hasFnAttr(Attribute::NoImplicitFloat);
- assert(!(NumXMMRegs && !Subtarget->hasXMM()) &&
+ assert(!(NumXMMRegs && !Subtarget->hasSSE1()) &&
"SSE register cannot be used when SSE is disabled!");
assert(!(NumXMMRegs && MF.getTarget().Options.UseSoftFloat &&
NoImplicitFloatOps) &&
"SSE register cannot be used when SSE is disabled!");
if (MF.getTarget().Options.UseSoftFloat || NoImplicitFloatOps ||
- !Subtarget->hasXMM())
+ !Subtarget->hasSSE1())
// Kernel mode asks for SSE to be disabled, so don't push them
// on the stack.
TotalNumXMMRegs = 0;
X86::XMM4, X86::XMM5, X86::XMM6, X86::XMM7
};
unsigned NumXMMRegs = CCInfo.getFirstUnallocated(XMMArgRegs, 8);
- assert((Subtarget->hasXMM() || !NumXMMRegs)
+ assert((Subtarget->hasSSE1() || !NumXMMRegs)
&& "SSE registers cannot be used when SSE is disabled");
Chain = DAG.getCopyToReg(Chain, dl, X86::AL,
/// getZeroVector - Returns a vector of specified type with all zero elements.
///
-static SDValue getZeroVector(EVT VT, bool HasXMMInt, SelectionDAG &DAG,
+static SDValue getZeroVector(EVT VT, bool HasSSE2, SelectionDAG &DAG,
DebugLoc dl) {
assert(VT.isVector() && "Expected a vector type");
// to their dest type. This ensures they get CSE'd.
SDValue Vec;
if (VT.getSizeInBits() == 128) { // SSE
- if (HasXMMInt) { // SSE2
+ if (HasSSE2) { // SSE2
SDValue Cst = DAG.getTargetConstant(0, MVT::i32);
Vec = DAG.getNode(ISD::BUILD_VECTOR, dl, MVT::v4i32, Cst, Cst, Cst, Cst);
} else { // SSE1
// Extract the 128-bit part containing the splat element and update
// the splat element index when it refers to the higher register.
if (Size == 256) {
- unsigned Idx = (EltNo > NumElems/2) ? NumElems/2 : 0;
+ unsigned Idx = (EltNo >= NumElems/2) ? NumElems/2 : 0;
V1 = Extract128BitVector(V1, DAG.getConstant(Idx, MVT::i32), DAG, dl);
if (Idx > 0)
EltNo -= NumElems/2;
/// element of V2 is swizzled into the zero/undef vector, landing at element
/// Idx. This produces a shuffle mask like 4,1,2,3 (idx=0) or 0,1,2,4 (idx=3).
static SDValue getShuffleVectorZeroOrUndef(SDValue V2, unsigned Idx,
- bool isZero, bool HasXMMInt,
+ bool isZero, bool HasSSE2,
SelectionDAG &DAG) {
EVT VT = V2.getValueType();
SDValue V1 = isZero
- ? getZeroVector(VT, HasXMMInt, DAG, V2.getDebugLoc()) : DAG.getUNDEF(VT);
+ ? getZeroVector(VT, HasSSE2, DAG, V2.getDebugLoc()) : DAG.getUNDEF(VT);
unsigned NumElems = VT.getVectorNumElements();
SmallVector<int, 16> MaskVec;
for (unsigned i = 0; i != NumElems; ++i)
/// a scalar load.
/// The scalar load node is returned when a pattern is found,
/// or SDValue() otherwise.
-static SDValue isVectorBroadcast(SDValue &Op, bool hasAVX2) {
+static SDValue isVectorBroadcast(SDValue &Op, const X86Subtarget *Subtarget) {
+ if (!Subtarget->hasAVX())
+ return SDValue();
+
EVT VT = Op.getValueType();
SDValue V = Op;
bool Is128 = VT.getSizeInBits() == 128;
unsigned ScalarSize = Ld.getValueType().getSizeInBits();
- if (hasAVX2) {
- // VBroadcast to YMM
- if (Is256 && (ScalarSize == 8 || ScalarSize == 16 ||
- ScalarSize == 32 || ScalarSize == 64 ))
- return Ld;
-
- // VBroadcast to XMM
- if (Is128 && (ScalarSize == 8 || ScalarSize == 32 ||
- ScalarSize == 16 || ScalarSize == 64 ))
- return Ld;
- }
-
// VBroadcast to YMM
if (Is256 && (ScalarSize == 32 || ScalarSize == 64))
return Ld;
if (Is128 && (ScalarSize == 32))
return Ld;
+ // The integer check is needed for the 64-bit into 128-bit so it doesn't match
+ // double since there is vbroadcastsd xmm
+ if (Subtarget->hasAVX2() && Ld.getValueType().isInteger()) {
+ // VBroadcast to YMM
+ if (Is256 && (ScalarSize == 8 || ScalarSize == 16))
+ return Ld;
+
+ // VBroadcast to XMM
+ if (Is128 && (ScalarSize == 8 || ScalarSize == 16 || ScalarSize == 64))
+ return Ld;
+ }
// Unsupported broadcast.
return SDValue();
Op.getValueType() == MVT::v8i32)
return Op;
- return getZeroVector(Op.getValueType(), Subtarget->hasXMMInt(), DAG, dl);
+ return getZeroVector(Op.getValueType(), Subtarget->hasSSE2(), DAG, dl);
}
// Vectors containing all ones can be matched by pcmpeqd on 128-bit width
return getOnesVector(Op.getValueType(), Subtarget->hasAVX2(), DAG, dl);
}
- SDValue LD = isVectorBroadcast(Op, Subtarget->hasAVX2());
- if (Subtarget->hasAVX() && LD.getNode())
- return DAG.getNode(X86ISD::VBROADCAST, dl, VT, LD);
+ SDValue LD = isVectorBroadcast(Op, Subtarget);
+ if (LD.getNode())
+ return DAG.getNode(X86ISD::VBROADCAST, dl, VT, LD);
unsigned EVTBits = ExtVT.getSizeInBits();
Item = DAG.getNode(ISD::TRUNCATE, dl, MVT::i32, Item);
Item = DAG.getNode(ISD::SCALAR_TO_VECTOR, dl, VecVT, Item);
Item = getShuffleVectorZeroOrUndef(Item, 0, true,
- Subtarget->hasXMMInt(), DAG);
+ Subtarget->hasSSE2(), DAG);
// Now we have our 32-bit value zero extended in the low element of
// a vector. If Idx != 0, swizzle it into place.
if (ExtVT == MVT::i32 || ExtVT == MVT::f32 || ExtVT == MVT::f64 ||
(ExtVT == MVT::i64 && Subtarget->is64Bit())) {
if (VT.getSizeInBits() == 256) {
- EVT VT128 = EVT::getVectorVT(*DAG.getContext(), ExtVT, NumElems / 2);
- Item = DAG.getNode(ISD::SCALAR_TO_VECTOR, dl, VT128, Item);
SDValue ZeroVec = getZeroVector(VT, true, DAG, dl);
- return Insert128BitVector(ZeroVec, Item, DAG.getConstant(0, MVT::i32),
- DAG, dl);
+ return DAG.getNode(ISD::INSERT_VECTOR_ELT, dl, VT, ZeroVec,
+ Item, DAG.getIntPtrConstant(0));
}
assert(VT.getSizeInBits() == 128 && "Expected an SSE value type!");
Item = DAG.getNode(ISD::SCALAR_TO_VECTOR, dl, VT, Item);
// Turn it into a MOVL (i.e. movss, movsd, or movd) to a zero vector.
return getShuffleVectorZeroOrUndef(Item, 0, true,
- Subtarget->hasXMMInt(), DAG);
+ Subtarget->hasSSE2(), DAG);
}
if (ExtVT == MVT::i16 || ExtVT == MVT::i8) {
} else {
assert(VT.getSizeInBits() == 128 && "Expected an SSE value type!");
Item = getShuffleVectorZeroOrUndef(Item, 0, true,
- Subtarget->hasXMMInt(), DAG);
+ Subtarget->hasSSE2(), DAG);
}
return DAG.getNode(ISD::BITCAST, dl, VT, Item);
}
// Turn it into a shuffle of zero and zero-extended scalar to vector.
Item = getShuffleVectorZeroOrUndef(Item, 0, NumZero > 0,
- Subtarget->hasXMMInt(), DAG);
+ Subtarget->hasSSE2(), DAG);
SmallVector<int, 8> MaskVec;
for (unsigned i = 0; i < NumElems; i++)
MaskVec.push_back(i == Idx ? 0 : 1);
SDValue V2 = DAG.getNode(ISD::SCALAR_TO_VECTOR, dl, VT,
Op.getOperand(Idx));
return getShuffleVectorZeroOrUndef(V2, Idx, true,
- Subtarget->hasXMMInt(), DAG);
+ Subtarget->hasSSE2(), DAG);
}
return SDValue();
}
for (unsigned i = 0; i < 4; ++i) {
bool isZero = !(NonZeros & (1 << i));
if (isZero)
- V[i] = getZeroVector(VT, Subtarget->hasXMMInt(), DAG, dl);
+ V[i] = getZeroVector(VT, Subtarget->hasSSE2(), DAG, dl);
else
V[i] = DAG.getNode(ISD::SCALAR_TO_VECTOR, dl, VT, Op.getOperand(i));
}
static
SDValue getMOVLowToHigh(SDValue &Op, DebugLoc &dl, SelectionDAG &DAG,
- bool HasXMMInt) {
+ bool HasSSE2) {
SDValue V1 = Op.getOperand(0);
SDValue V2 = Op.getOperand(1);
EVT VT = Op.getValueType();
assert(VT != MVT::v2i64 && "unsupported shuffle type");
- if (HasXMMInt && VT == MVT::v2f64)
+ if (HasSSE2 && VT == MVT::v2f64)
return getTargetShuffleNode(X86ISD::MOVLHPD, dl, VT, V1, V2, DAG);
// v4f32 or v4i32: canonizalized to v4f32 (which is legal for SSE1)
}
static
-SDValue getMOVLP(SDValue &Op, DebugLoc &dl, SelectionDAG &DAG, bool HasXMMInt) {
+SDValue getMOVLP(SDValue &Op, DebugLoc &dl, SelectionDAG &DAG, bool HasSSE2) {
SDValue V1 = Op.getOperand(0);
SDValue V2 = Op.getOperand(1);
EVT VT = Op.getValueType();
ShuffleVectorSDNode *SVOp = cast<ShuffleVectorSDNode>(Op);
if (CanFoldLoad) {
- if (HasXMMInt && NumElems == 2)
+ if (HasSSE2 && NumElems == 2)
return getTargetShuffleNode(X86ISD::MOVLPD, dl, VT, V1, V2, DAG);
if (NumElems == 4)
// this is horrible, but will stay like this until we move all shuffle
// matching to x86 specific nodes. Note that for the 1st condition all
// types are matched with movsd.
- if (HasXMMInt) {
+ if (HasSSE2) {
// FIXME: isMOVLMask should be checked and matched before getMOVLP,
// as to remove this logic from here, as much as possible
if (NumElems == 2 || !X86::isMOVLMask(SVOp))
SDValue V2 = Op.getOperand(1);
if (isZeroShuffle(SVOp))
- return getZeroVector(VT, Subtarget->hasXMMInt(), DAG, dl);
+ return getZeroVector(VT, Subtarget->hasSSE2(), DAG, dl);
// Handle splat operations
if (SVOp->isSplat()) {
return Op;
// Use vbroadcast whenever the splat comes from a foldable load
- SDValue LD = isVectorBroadcast(Op, Subtarget->hasAVX2());
- if (Subtarget->hasAVX() && LD.getNode())
+ SDValue LD = isVectorBroadcast(Op, Subtarget);
+ if (LD.getNode())
return DAG.getNode(X86ISD::VBROADCAST, dl, VT, LD);
// Handle splats by matching through known shuffle masks
if (NewOp.getNode())
return DAG.getNode(ISD::BITCAST, dl, VT, NewOp);
} else if ((VT == MVT::v4i32 ||
- (VT == MVT::v4f32 && Subtarget->hasXMMInt()))) {
+ (VT == MVT::v4f32 && Subtarget->hasSSE2()))) {
// FIXME: Figure out a cleaner way to do this.
// Try to make use of movq to zero out the top part.
if (ISD::isBuildVectorAllZeros(V2.getNode())) {
bool V2IsUndef = V2.getOpcode() == ISD::UNDEF;
bool V1IsSplat = false;
bool V2IsSplat = false;
- bool HasXMMInt = Subtarget->hasXMMInt();
+ bool HasSSE2 = Subtarget->hasSSE2();
bool HasAVX = Subtarget->hasAVX();
bool HasAVX2 = Subtarget->hasAVX2();
MachineFunction &MF = DAG.getMachineFunction();
return getMOVHighToLow(Op, dl, DAG);
// Use to match splats
- if (HasXMMInt && X86::isUNPCKHMask(SVOp, HasAVX2) && V2IsUndef &&
+ if (HasSSE2 && X86::isUNPCKHMask(SVOp, HasAVX2) && V2IsUndef &&
(VT == MVT::v2f64 || VT == MVT::v2i64))
return getTargetShuffleNode(X86ISD::UNPCKH, dl, VT, V1, V1, DAG);
unsigned TargetMask = X86::getShuffleSHUFImmediate(SVOp);
- if (HasXMMInt && (VT == MVT::v4f32 || VT == MVT::v4i32))
+ if (HasSSE2 && (VT == MVT::v4f32 || VT == MVT::v4i32))
return getTargetShuffleNode(X86ISD::PSHUFD, dl, VT, V1, TargetMask, DAG);
return getTargetShuffleNode(X86ISD::SHUFP, dl, VT, V1, V1,
bool isLeft = false;
unsigned ShAmt = 0;
SDValue ShVal;
- bool isShift = HasXMMInt && isVectorShift(SVOp, DAG, isLeft, ShVal, ShAmt);
+ bool isShift = HasSSE2 && isVectorShift(SVOp, DAG, isLeft, ShVal, ShAmt);
if (isShift && ShVal.hasOneUse()) {
// If the shifted value has multiple uses, it may be cheaper to use
// v_set0 + movlhps or movhlps, etc.
if (ISD::isBuildVectorAllZeros(V1.getNode()))
return getVZextMovL(VT, VT, V2, DAG, Subtarget, dl);
if (!X86::isMOVLPMask(SVOp)) {
- if (HasXMMInt && (VT == MVT::v2i64 || VT == MVT::v2f64))
+ if (HasSSE2 && (VT == MVT::v2i64 || VT == MVT::v2f64))
return getTargetShuffleNode(X86ISD::MOVSD, dl, VT, V1, V2, DAG);
if (VT == MVT::v4i32 || VT == MVT::v4f32)
// FIXME: fold these into legal mask.
if (X86::isMOVLHPSMask(SVOp) && !X86::isUNPCKLMask(SVOp, HasAVX2))
- return getMOVLowToHigh(Op, dl, DAG, HasXMMInt);
+ return getMOVLowToHigh(Op, dl, DAG, HasSSE2);
if (X86::isMOVHLPSMask(SVOp))
return getMOVHighToLow(Op, dl, DAG);
return getTargetShuffleNode(X86ISD::MOVSLDUP, dl, VT, V1, DAG);
if (X86::isMOVLPMask(SVOp))
- return getMOVLP(Op, dl, DAG, HasXMMInt);
+ return getMOVLP(Op, dl, DAG, HasSSE2);
if (ShouldXformToMOVHLPS(SVOp) ||
ShouldXformToMOVLP(V1.getNode(), V2.getNode(), SVOp))
Op.getOperand(0));
// Zero out the upper parts of the register.
- Load = getShuffleVectorZeroOrUndef(Load, 0, true, Subtarget->hasXMMInt(),
+ Load = getShuffleVectorZeroOrUndef(Load, 0, true, Subtarget->hasSSE2(),
DAG);
Load = DAG.getNode(ISD::EXTRACT_VECTOR_ELT, dl, MVT::f64,
return LowerUINT_TO_FP_i64(Op, DAG);
else if (SrcVT == MVT::i32 && X86ScalarSSEf64)
return LowerUINT_TO_FP_i32(Op, DAG);
- else if (SrcVT == MVT::i64 && DstVT == MVT::f32)
+ else if (Subtarget->is64Bit() &&
+ SrcVT == MVT::i64 && DstVT == MVT::f32)
return SDValue();
// Make a 64-bit buffer, and use it to build an FILD.
assert(SrcVT == MVT::i64 && "Unexpected type in UINT_TO_FP");
SDValue Store = DAG.getStore(DAG.getEntryNode(), dl, Op.getOperand(0),
- StackSlot, MachinePointerInfo(),
+ StackSlot, MachinePointerInfo(),
false, false, 0);
// For i64 source, we need to add the appropriate power of 2 if the input
// was negative. This is the same as the optimization in
assert(!getTargetMachine().Options.UseSoftFloat &&
!(DAG.getMachineFunction()
.getFunction()->hasFnAttr(Attribute::NoImplicitFloat)) &&
- Subtarget->hasXMM());
+ Subtarget->hasSSE1());
}
// Insert VAARG_64 node into the DAG
SDValue Amt = Op.getOperand(1);
LLVMContext *Context = DAG.getContext();
- if (!Subtarget->hasXMMInt())
+ if (!Subtarget->hasSSE2())
return SDValue();
// Optimize shl/srl/sra with constant shift amount.
if (VT == MVT::v16i8 && Op.getOpcode() == ISD::SRA) {
if (ShiftAmt == 7) {
// R s>> 7 === R s< 0
- SDValue Zeros = getZeroVector(VT, true /* HasXMMInt */, DAG, dl);
+ SDValue Zeros = getZeroVector(VT, true /* HasSSE2 */, DAG, dl);
return DAG.getNode(X86ISD::PCMPGTB, dl, VT, Zeros, R);
}
if (Op.getOpcode() == ISD::SRA) {
if (ShiftAmt == 7) {
// R s>> 7 === R s< 0
- SDValue Zeros = getZeroVector(VT, true /* HasXMMInt */, DAG, dl);
+ SDValue Zeros = getZeroVector(VT, true /* HasSSE2 */, DAG, dl);
return DAG.getNode(X86ISD::PCMPGTB, dl, VT, Zeros, R);
}
EVT ExtraVT = cast<VTSDNode>(Op.getOperand(1))->getVT();
EVT VT = Op.getValueType();
- if (Subtarget->hasXMMInt() && VT.isVector()) {
+ if (Subtarget->hasSSE2() && VT.isVector()) {
unsigned BitsDiff = VT.getScalarType().getSizeInBits() -
ExtraVT.getScalarType().getSizeInBits();
SDValue ShAmt = DAG.getConstant(BitsDiff, MVT::i32);
// Go ahead and emit the fence on x86-64 even if we asked for no-sse2.
// There isn't any reason to disable it if the target processor supports it.
- if (!Subtarget->hasXMMInt() && !Subtarget->is64Bit()) {
+ if (!Subtarget->hasSSE2() && !Subtarget->is64Bit()) {
SDValue Chain = Op.getOperand(0);
SDValue Zero = DAG.getConstant(0, MVT::i32);
SDValue Ops[] = {
// Use mfence if we have SSE2 or we're on x86-64 (even if we asked for
// no-sse2). There isn't any reason to disable it if the target processor
// supports it.
- if (Subtarget->hasXMMInt() || Subtarget->is64Bit())
+ if (Subtarget->hasSSE2() || Subtarget->is64Bit())
return DAG.getNode(X86ISD::MFENCE, dl, MVT::Other, Op.getOperand(0));
SDValue Chain = Op.getOperand(0);
SelectionDAG &DAG) const {
EVT SrcVT = Op.getOperand(0).getValueType();
EVT DstVT = Op.getValueType();
- assert(Subtarget->is64Bit() && !Subtarget->hasXMMInt() &&
+ assert(Subtarget->is64Bit() && !Subtarget->hasSSE2() &&
Subtarget->hasMMX() && "Unexpected custom BITCAST");
assert((DstVT == MVT::i64 ||
(DstVT.isVector() && DstVT.getSizeInBits()==64)) &&
BuildMI(BB, DL, TII->get(Is64Bit ? X86::SUB64rr:X86::SUB32rr), SPLimitVReg)
.addReg(tmpSPVReg).addReg(sizeVReg);
BuildMI(BB, DL, TII->get(Is64Bit ? X86::CMP64mr:X86::CMP32mr))
- .addReg(0).addImm(0).addReg(0).addImm(TlsOffset).addReg(TlsReg)
+ .addReg(0).addImm(1).addReg(0).addImm(TlsOffset).addReg(TlsReg)
.addReg(SPLimitVReg);
BuildMI(BB, DL, TII->get(X86::JG_4)).addMBB(mallocMBB);
// Emit a zeroed vector and insert the desired subvector on its
// first half.
- SDValue Zeros = getZeroVector(VT, true /* HasXMMInt */, DAG, dl);
+ SDValue Zeros = getZeroVector(VT, true /* HasSSE2 */, DAG, dl);
SDValue InsV = Insert128BitVector(Zeros, V1.getOperand(0),
DAG.getConstant(0, MVT::i32), DAG, dl);
return DCI.CombineTo(N, InsV);
// ignored in unsafe-math mode).
if (Cond.getOpcode() == ISD::SETCC && VT.isFloatingPoint() &&
VT != MVT::f80 && DAG.getTargetLoweringInfo().isTypeLegal(VT) &&
- (Subtarget->hasXMMInt() ||
- (Subtarget->hasXMM() && VT.getScalarType() == MVT::f32))) {
+ (Subtarget->hasSSE2() ||
+ (Subtarget->hasSSE1() && VT.getScalarType() == MVT::f32))) {
ISD::CondCode CC = cast<CondCodeSDNode>(Cond.getOperand(2))->get();
unsigned Opcode = 0;
// all elements are shifted by the same amount. We can't do this in legalize
// because the a constant vector is typically transformed to a constant pool
// so we have no knowledge of the shift amount.
- if (!Subtarget->hasXMMInt())
+ if (!Subtarget->hasSSE2())
return SDValue();
if (VT != MVT::v2i64 && VT != MVT::v4i32 && VT != MVT::v8i16 &&
// SSE1 supports CMP{eq|ne}SS, and SSE2 added CMP{eq|ne}SD, but
// we're requiring SSE2 for both.
- if (Subtarget->hasXMMInt() && isAndOrOfSetCCs(SDValue(N, 0U), opcode)) {
+ if (Subtarget->hasSSE2() && isAndOrOfSetCCs(SDValue(N, 0U), opcode)) {
SDValue N0 = N->getOperand(0);
SDValue N1 = N->getOperand(1);
SDValue CMP0 = N0->getOperand(1);
// Canonicalize pandn to RHS
if (N0.getOpcode() == X86ISD::ANDNP)
std::swap(N0, N1);
- // or (and (m, x), (pandn m, y))
+ // or (and (m, y), (pandn m, x))
if (N0.getOpcode() == ISD::AND && N1.getOpcode() == X86ISD::ANDNP) {
SDValue Mask = N1.getOperand(0);
SDValue X = N1.getOperand(1);
const Function *F = DAG.getMachineFunction().getFunction();
bool NoImplicitFloatOps = F->hasFnAttr(Attribute::NoImplicitFloat);
bool F64IsLegal = !DAG.getTarget().Options.UseSoftFloat && !NoImplicitFloatOps
- && Subtarget->hasXMMInt();
+ && Subtarget->hasSSE2();
if ((VT.isVector() ||
(VT == MVT::i64 && F64IsLegal && !Subtarget->is64Bit())) &&
isa<LoadSDNode>(St->getValue()) &&
break;
case 'x':
case 'Y':
- if (((type->getPrimitiveSizeInBits() == 128) && Subtarget->hasXMM()) ||
+ if (((type->getPrimitiveSizeInBits() == 128) && Subtarget->hasSSE1()) ||
((type->getPrimitiveSizeInBits() == 256) && Subtarget->hasAVX()))
weight = CW_Register;
break;
// FP X constraints get lowered to SSE1/2 registers if available, otherwise
// 'f' like normal targets.
if (ConstraintVT.isFloatingPoint()) {
- if (Subtarget->hasXMMInt())
+ if (Subtarget->hasSSE2())
return "Y";
- if (Subtarget->hasXMM())
+ if (Subtarget->hasSSE1())
return "x";
}
if (!Subtarget->hasMMX()) break;
return std::make_pair(0U, X86::VR64RegisterClass);
case 'Y': // SSE_REGS if SSE2 allowed
- if (!Subtarget->hasXMMInt()) break;
+ if (!Subtarget->hasSSE2()) break;
// FALL THROUGH.
case 'x': // SSE_REGS if SSE1 allowed or AVX_REGS if AVX allowed
- if (!Subtarget->hasXMM()) break;
+ if (!Subtarget->hasSSE1()) break;
switch (VT.getSimpleVT().SimpleTy) {
default: break;
projects / oota-llvm.git / blobdiff