Base_Reg = Reg;
}
+#if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
void dump() {
dbgs() << "X86ISelAddressMode " << this << '\n';
dbgs() << "Base_Reg ";
dbgs() << "nul";
dbgs() << " JT" << JT << " Align" << Align << '\n';
}
+#endif
};
}
SDNode *Select(SDNode *N);
SDNode *SelectGather(SDNode *N, unsigned Opc);
SDNode *SelectAtomic64(SDNode *Node, unsigned Opc);
- SDNode *SelectAtomicLoadAdd(SDNode *Node, EVT NVT);
SDNode *SelectAtomicLoadArith(SDNode *Node, EVT NVT);
bool FoldOffsetIntoAddress(uint64_t Offset, X86ISelAddressMode &AM);
else if (AM.CP)
Disp = CurDAG->getTargetConstantPool(AM.CP, MVT::i32,
AM.Align, AM.Disp, AM.SymbolFlags);
- else if (AM.ES)
+ else if (AM.ES) {
+ assert(!AM.Disp && "Non-zero displacement is ignored with ES.");
Disp = CurDAG->getTargetExternalSymbol(AM.ES, MVT::i32, AM.SymbolFlags);
- else if (AM.JT != -1)
+ } else if (AM.JT != -1) {
+ assert(!AM.Disp && "Non-zero displacement is ignored with JT.");
Disp = CurDAG->getTargetJumpTable(AM.JT, MVT::i32, AM.SymbolFlags);
- else if (AM.BlockAddr)
- Disp = CurDAG->getBlockAddress(AM.BlockAddr, MVT::i32,
- true, AM.SymbolFlags);
+ } else if (AM.BlockAddr)
+ Disp = CurDAG->getTargetBlockAddress(AM.BlockAddr, MVT::i32, AM.Disp,
+ AM.SymbolFlags);
else
Disp = CurDAG->getTargetConstant(AM.Disp, MVT::i32);
/// MoveBelowCallOrigChain - Replace the original chain operand of the call with
/// load's chain operand and move load below the call's chain operand.
static void MoveBelowOrigChain(SelectionDAG *CurDAG, SDValue Load,
- SDValue Call, SDValue OrigChain) {
+ SDValue Call, SDValue OrigChain) {
SmallVector<SDValue, 8> Ops;
SDValue Chain = OrigChain.getOperand(0);
if (Chain.getNode() == Load.getNode())
CurDAG->UpdateNodeOperands(OrigChain.getNode(), &Ops[0], Ops.size());
CurDAG->UpdateNodeOperands(Load.getNode(), Call.getOperand(0),
Load.getOperand(1), Load.getOperand(2));
+
+ unsigned NumOps = Call.getNode()->getNumOperands();
Ops.clear();
Ops.push_back(SDValue(Load.getNode(), 1));
- for (unsigned i = 1, e = Call.getNode()->getNumOperands(); i != e; ++i)
+ for (unsigned i = 1, e = NumOps; i != e; ++i)
Ops.push_back(Call.getOperand(i));
- CurDAG->UpdateNodeOperands(Call.getNode(), &Ops[0], Ops.size());
+ CurDAG->UpdateNodeOperands(Call.getNode(), &Ops[0], NumOps);
}
/// isCalleeLoad - Return true if call address is a load and it can be
/// In the case of a tail call, there isn't a callseq node between the call
/// chain and the load.
static bool isCalleeLoad(SDValue Callee, SDValue &Chain, bool HasCallSeq) {
+ // The transformation is somewhat dangerous if the call's chain was glued to
+ // the call. After MoveBelowOrigChain the load is moved between the call and
+ // the chain, this can create a cycle if the load is not folded. So it is
+ // *really* important that we are sure the load will be folded.
if (Callee.getNode() == Chain.getNode() || !Callee.hasOneUse())
return false;
LoadSDNode *LD = dyn_cast<LoadSDNode>(Callee.getNode());
void X86DAGToDAGISel::PreprocessISelDAG() {
// OptForSize is used in pattern predicates that isel is matching.
- OptForSize = MF->getFunction()->hasFnAttr(Attribute::OptimizeForSize);
+ OptForSize = MF->getFunction()->getFnAttributes().
+ hasAttribute(Attributes::OptimizeForSize);
for (SelectionDAG::allnodes_iterator I = CurDAG->allnodes_begin(),
E = CurDAG->allnodes_end(); I != E; ) {
if (OptLevel != CodeGenOpt::None &&
(N->getOpcode() == X86ISD::CALL ||
- N->getOpcode() == X86ISD::TC_RETURN)) {
+ (N->getOpcode() == X86ISD::TC_RETURN &&
+ // Only does this if load can be foled into TC_RETURN.
+ (Subtarget->is64Bit() ||
+ getTargetMachine().getRelocationModel() != Reloc::PIC_)))) {
/// Also try moving call address load from outside callseq_start to just
/// before the call to allow it to be folded.
///
} else if (JumpTableSDNode *J = dyn_cast<JumpTableSDNode>(N0)) {
AM.JT = J->getIndex();
AM.SymbolFlags = J->getTargetFlags();
- } else {
- AM.BlockAddr = cast<BlockAddressSDNode>(N0)->getBlockAddress();
- AM.SymbolFlags = cast<BlockAddressSDNode>(N0)->getTargetFlags();
- }
+ } else if (BlockAddressSDNode *BA = dyn_cast<BlockAddressSDNode>(N0)) {
+ X86ISelAddressMode Backup = AM;
+ AM.BlockAddr = BA->getBlockAddress();
+ AM.SymbolFlags = BA->getTargetFlags();
+ if (FoldOffsetIntoAddress(BA->getOffset(), AM)) {
+ AM = Backup;
+ return true;
+ }
+ } else
+ llvm_unreachable("Unhandled symbol reference node.");
if (N.getOpcode() == X86ISD::WrapperRIP)
AM.setBaseReg(CurDAG->getRegister(X86::RIP, MVT::i64));
} else if (JumpTableSDNode *J = dyn_cast<JumpTableSDNode>(N0)) {
AM.JT = J->getIndex();
AM.SymbolFlags = J->getTargetFlags();
- } else {
- AM.BlockAddr = cast<BlockAddressSDNode>(N0)->getBlockAddress();
- AM.SymbolFlags = cast<BlockAddressSDNode>(N0)->getTargetFlags();
- }
+ } else if (BlockAddressSDNode *BA = dyn_cast<BlockAddressSDNode>(N0)) {
+ AM.BlockAddr = BA->getBlockAddress();
+ AM.Disp += BA->getOffset();
+ AM.SymbolFlags = BA->getTargetFlags();
+ } else
+ llvm_unreachable("Unhandled symbol reference node.");
return false;
}
AM.IndexReg = ShVal.getNode()->getOperand(0);
ConstantSDNode *AddVal =
cast<ConstantSDNode>(ShVal.getNode()->getOperand(1));
- uint64_t Disp = AddVal->getSExtValue() << Val;
+ uint64_t Disp = (uint64_t)AddVal->getSExtValue() << Val;
if (!FoldOffsetIntoAddress(Disp, AM))
return false;
}
// that are not a MemSDNode, and thus don't have proper addrspace info.
Parent->getOpcode() != ISD::INTRINSIC_W_CHAIN && // unaligned loads, fixme
Parent->getOpcode() != ISD::INTRINSIC_VOID && // nontemporal stores
- Parent->getOpcode() != X86ISD::TLSCALL) { // Fixme
+ Parent->getOpcode() != X86ISD::TLSCALL && // Fixme
+ Parent->getOpcode() != X86ISD::EH_SJLJ_SETJMP && // setjmp
+ Parent->getOpcode() != X86ISD::EH_SJLJ_LONGJMP) { // longjmp
unsigned AddrSpace =
cast<MemSDNode>(Parent)->getPointerInfo().getAddrSpace();
// AddrSpace 256 -> GS, 257 -> FS.
SDValue In1 = Node->getOperand(1);
SDValue In2L = Node->getOperand(2);
SDValue In2H = Node->getOperand(3);
+
SDValue Tmp0, Tmp1, Tmp2, Tmp3, Tmp4;
if (!SelectAddr(Node, In1, Tmp0, Tmp1, Tmp2, Tmp3, Tmp4))
return NULL;
return ResNode;
}
-// FIXME: Figure out some way to unify this with the 'or' and other code
-// below.
-SDNode *X86DAGToDAGISel::SelectAtomicLoadAdd(SDNode *Node, EVT NVT) {
- if (Node->hasAnyUseOfValue(0))
- return 0;
-
- // Optimize common patterns for __sync_add_and_fetch and
- // __sync_sub_and_fetch where the result is not used. This allows us
- // to use "lock" version of add, sub, inc, dec instructions.
- // FIXME: Do not use special instructions but instead add the "lock"
- // prefix to the target node somehow. The extra information will then be
- // transferred to machine instruction and it denotes the prefix.
- SDValue Chain = Node->getOperand(0);
- SDValue Ptr = Node->getOperand(1);
- SDValue Val = Node->getOperand(2);
- SDValue Tmp0, Tmp1, Tmp2, Tmp3, Tmp4;
- if (!SelectAddr(Node, Ptr, Tmp0, Tmp1, Tmp2, Tmp3, Tmp4))
- return 0;
-
- bool isInc = false, isDec = false, isSub = false, isCN = false;
- ConstantSDNode *CN = dyn_cast<ConstantSDNode>(Val);
- if (CN && CN->getSExtValue() == (int32_t)CN->getSExtValue()) {
- isCN = true;
- int64_t CNVal = CN->getSExtValue();
- if (CNVal == 1)
- isInc = true;
- else if (CNVal == -1)
- isDec = true;
- else if (CNVal >= 0)
- Val = CurDAG->getTargetConstant(CNVal, NVT);
- else {
- isSub = true;
- Val = CurDAG->getTargetConstant(-CNVal, NVT);
- }
- } else if (Val.hasOneUse() &&
- Val.getOpcode() == ISD::SUB &&
- X86::isZeroNode(Val.getOperand(0))) {
- isSub = true;
- Val = Val.getOperand(1);
- }
-
- DebugLoc dl = Node->getDebugLoc();
- unsigned Opc = 0;
- switch (NVT.getSimpleVT().SimpleTy) {
- default: return 0;
- case MVT::i8:
- if (isInc)
- Opc = X86::LOCK_INC8m;
- else if (isDec)
- Opc = X86::LOCK_DEC8m;
- else if (isSub) {
- if (isCN)
- Opc = X86::LOCK_SUB8mi;
- else
- Opc = X86::LOCK_SUB8mr;
- } else {
- if (isCN)
- Opc = X86::LOCK_ADD8mi;
- else
- Opc = X86::LOCK_ADD8mr;
- }
- break;
- case MVT::i16:
- if (isInc)
- Opc = X86::LOCK_INC16m;
- else if (isDec)
- Opc = X86::LOCK_DEC16m;
- else if (isSub) {
- if (isCN) {
- if (immSext8(Val.getNode()))
- Opc = X86::LOCK_SUB16mi8;
- else
- Opc = X86::LOCK_SUB16mi;
- } else
- Opc = X86::LOCK_SUB16mr;
- } else {
- if (isCN) {
- if (immSext8(Val.getNode()))
- Opc = X86::LOCK_ADD16mi8;
- else
- Opc = X86::LOCK_ADD16mi;
- } else
- Opc = X86::LOCK_ADD16mr;
- }
- break;
- case MVT::i32:
- if (isInc)
- Opc = X86::LOCK_INC32m;
- else if (isDec)
- Opc = X86::LOCK_DEC32m;
- else if (isSub) {
- if (isCN) {
- if (immSext8(Val.getNode()))
- Opc = X86::LOCK_SUB32mi8;
- else
- Opc = X86::LOCK_SUB32mi;
- } else
- Opc = X86::LOCK_SUB32mr;
- } else {
- if (isCN) {
- if (immSext8(Val.getNode()))
- Opc = X86::LOCK_ADD32mi8;
- else
- Opc = X86::LOCK_ADD32mi;
- } else
- Opc = X86::LOCK_ADD32mr;
- }
- break;
- case MVT::i64:
- if (isInc)
- Opc = X86::LOCK_INC64m;
- else if (isDec)
- Opc = X86::LOCK_DEC64m;
- else if (isSub) {
- Opc = X86::LOCK_SUB64mr;
- if (isCN) {
- if (immSext8(Val.getNode()))
- Opc = X86::LOCK_SUB64mi8;
- else if (i64immSExt32(Val.getNode()))
- Opc = X86::LOCK_SUB64mi32;
- }
- } else {
- Opc = X86::LOCK_ADD64mr;
- if (isCN) {
- if (immSext8(Val.getNode()))
- Opc = X86::LOCK_ADD64mi8;
- else if (i64immSExt32(Val.getNode()))
- Opc = X86::LOCK_ADD64mi32;
- }
- }
- break;
- }
-
- SDValue Undef = SDValue(CurDAG->getMachineNode(TargetOpcode::IMPLICIT_DEF,
- dl, NVT), 0);
- MachineSDNode::mmo_iterator MemOp = MF->allocateMemRefsArray(1);
- MemOp[0] = cast<MemSDNode>(Node)->getMemOperand();
- if (isInc || isDec) {
- SDValue Ops[] = { Tmp0, Tmp1, Tmp2, Tmp3, Tmp4, Chain };
- SDValue Ret = SDValue(CurDAG->getMachineNode(Opc, dl, MVT::Other, Ops, 6), 0);
- cast<MachineSDNode>(Ret)->setMemRefs(MemOp, MemOp + 1);
- SDValue RetVals[] = { Undef, Ret };
- return CurDAG->getMergeValues(RetVals, 2, dl).getNode();
- } else {
- SDValue Ops[] = { Tmp0, Tmp1, Tmp2, Tmp3, Tmp4, Val, Chain };
- SDValue Ret = SDValue(CurDAG->getMachineNode(Opc, dl, MVT::Other, Ops, 7), 0);
- cast<MachineSDNode>(Ret)->setMemRefs(MemOp, MemOp + 1);
- SDValue RetVals[] = { Undef, Ret };
- return CurDAG->getMergeValues(RetVals, 2, dl).getNode();
- }
-}
-
+/// Atomic opcode table
+///
enum AtomicOpc {
+ ADD,
+ SUB,
+ INC,
+ DEC,
OR,
AND,
XOR,
};
static const uint16_t AtomicOpcTbl[AtomicOpcEnd][AtomicSzEnd] = {
+ {
+ X86::LOCK_ADD8mi,
+ X86::LOCK_ADD8mr,
+ X86::LOCK_ADD16mi8,
+ X86::LOCK_ADD16mi,
+ X86::LOCK_ADD16mr,
+ X86::LOCK_ADD32mi8,
+ X86::LOCK_ADD32mi,
+ X86::LOCK_ADD32mr,
+ X86::LOCK_ADD64mi8,
+ X86::LOCK_ADD64mi32,
+ X86::LOCK_ADD64mr,
+ },
+ {
+ X86::LOCK_SUB8mi,
+ X86::LOCK_SUB8mr,
+ X86::LOCK_SUB16mi8,
+ X86::LOCK_SUB16mi,
+ X86::LOCK_SUB16mr,
+ X86::LOCK_SUB32mi8,
+ X86::LOCK_SUB32mi,
+ X86::LOCK_SUB32mr,
+ X86::LOCK_SUB64mi8,
+ X86::LOCK_SUB64mi32,
+ X86::LOCK_SUB64mr,
+ },
+ {
+ 0,
+ X86::LOCK_INC8m,
+ 0,
+ 0,
+ X86::LOCK_INC16m,
+ 0,
+ 0,
+ X86::LOCK_INC32m,
+ 0,
+ 0,
+ X86::LOCK_INC64m,
+ },
+ {
+ 0,
+ X86::LOCK_DEC8m,
+ 0,
+ 0,
+ X86::LOCK_DEC16m,
+ 0,
+ 0,
+ X86::LOCK_DEC32m,
+ 0,
+ 0,
+ X86::LOCK_DEC64m,
+ },
{
X86::LOCK_OR8mi,
X86::LOCK_OR8mr,
X86::LOCK_OR32mr,
X86::LOCK_OR64mi8,
X86::LOCK_OR64mi32,
- X86::LOCK_OR64mr
+ X86::LOCK_OR64mr,
},
{
X86::LOCK_AND8mi,
X86::LOCK_AND32mr,
X86::LOCK_AND64mi8,
X86::LOCK_AND64mi32,
- X86::LOCK_AND64mr
+ X86::LOCK_AND64mr,
},
{
X86::LOCK_XOR8mi,
X86::LOCK_XOR32mr,
X86::LOCK_XOR64mi8,
X86::LOCK_XOR64mi32,
- X86::LOCK_XOR64mr
+ X86::LOCK_XOR64mr,
}
};
+// Return the target constant operand for atomic-load-op and do simple
+// translations, such as from atomic-load-add to lock-sub. The return value is
+// one of the following 3 cases:
+// + target-constant, the operand could be supported as a target constant.
+// + empty, the operand is not needed any more with the new op selected.
+// + non-empty, otherwise.
+static SDValue getAtomicLoadArithTargetConstant(SelectionDAG *CurDAG,
+ DebugLoc dl,
+ enum AtomicOpc &Op, EVT NVT,
+ SDValue Val) {
+ if (ConstantSDNode *CN = dyn_cast<ConstantSDNode>(Val)) {
+ int64_t CNVal = CN->getSExtValue();
+ // Quit if not 32-bit imm.
+ if ((int32_t)CNVal != CNVal)
+ return Val;
+ // For atomic-load-add, we could do some optimizations.
+ if (Op == ADD) {
+ // Translate to INC/DEC if ADD by 1 or -1.
+ if ((CNVal == 1) || (CNVal == -1)) {
+ Op = (CNVal == 1) ? INC : DEC;
+ // No more constant operand after being translated into INC/DEC.
+ return SDValue();
+ }
+ // Translate to SUB if ADD by negative value.
+ if (CNVal < 0) {
+ Op = SUB;
+ CNVal = -CNVal;
+ }
+ }
+ return CurDAG->getTargetConstant(CNVal, NVT);
+ }
+
+ // If the value operand is single-used, try to optimize it.
+ if (Op == ADD && Val.hasOneUse()) {
+ // Translate (atomic-load-add ptr (sub 0 x)) back to (lock-sub x).
+ if (Val.getOpcode() == ISD::SUB && X86::isZeroNode(Val.getOperand(0))) {
+ Op = SUB;
+ return Val.getOperand(1);
+ }
+ // A special case for i16, which needs truncating as, in most cases, it's
+ // promoted to i32. We will translate
+ // (atomic-load-add (truncate (sub 0 x))) to (lock-sub (EXTRACT_SUBREG x))
+ if (Val.getOpcode() == ISD::TRUNCATE && NVT == MVT::i16 &&
+ Val.getOperand(0).getOpcode() == ISD::SUB &&
+ X86::isZeroNode(Val.getOperand(0).getOperand(0))) {
+ Op = SUB;
+ Val = Val.getOperand(0);
+ return CurDAG->getTargetExtractSubreg(X86::sub_16bit, dl, NVT,
+ Val.getOperand(1));
+ }
+ }
+
+ return Val;
+}
+
SDNode *X86DAGToDAGISel::SelectAtomicLoadArith(SDNode *Node, EVT NVT) {
if (Node->hasAnyUseOfValue(0))
return 0;
+ DebugLoc dl = Node->getDebugLoc();
+
// Optimize common patterns for __sync_or_and_fetch and similar arith
// operations where the result is not used. This allows us to use the "lock"
// version of the arithmetic instruction.
- // FIXME: Same as for 'add' and 'sub', try to merge those down here.
SDValue Chain = Node->getOperand(0);
SDValue Ptr = Node->getOperand(1);
SDValue Val = Node->getOperand(2);
// Which index into the table.
enum AtomicOpc Op;
switch (Node->getOpcode()) {
+ default:
+ return 0;
case ISD::ATOMIC_LOAD_OR:
Op = OR;
break;
case ISD::ATOMIC_LOAD_XOR:
Op = XOR;
break;
- default:
- return 0;
- }
-
- bool isCN = false;
- ConstantSDNode *CN = dyn_cast<ConstantSDNode>(Val);
- if (CN && (int32_t)CN->getSExtValue() == CN->getSExtValue()) {
- isCN = true;
- Val = CurDAG->getTargetConstant(CN->getSExtValue(), NVT);
+ case ISD::ATOMIC_LOAD_ADD:
+ Op = ADD;
+ break;
}
+
+ Val = getAtomicLoadArithTargetConstant(CurDAG, dl, Op, NVT, Val);
+ bool isUnOp = !Val.getNode();
+ bool isCN = Val.getNode() && (Val.getOpcode() == ISD::TargetConstant);
unsigned Opc = 0;
switch (NVT.getSimpleVT().SimpleTy) {
assert(Opc != 0 && "Invalid arith lock transform!");
- DebugLoc dl = Node->getDebugLoc();
+ SDValue Ret;
SDValue Undef = SDValue(CurDAG->getMachineNode(TargetOpcode::IMPLICIT_DEF,
dl, NVT), 0);
MachineSDNode::mmo_iterator MemOp = MF->allocateMemRefsArray(1);
MemOp[0] = cast<MemSDNode>(Node)->getMemOperand();
- SDValue Ops[] = { Tmp0, Tmp1, Tmp2, Tmp3, Tmp4, Val, Chain };
- SDValue Ret = SDValue(CurDAG->getMachineNode(Opc, dl, MVT::Other, Ops, 7), 0);
+ if (isUnOp) {
+ SDValue Ops[] = { Tmp0, Tmp1, Tmp2, Tmp3, Tmp4, Chain };
+ Ret = SDValue(CurDAG->getMachineNode(Opc, dl, MVT::Other, Ops,
+ array_lengthof(Ops)), 0);
+ } else {
+ SDValue Ops[] = { Tmp0, Tmp1, Tmp2, Tmp3, Tmp4, Val, Chain };
+ Ret = SDValue(CurDAG->getMachineNode(Opc, dl, MVT::Other, Ops,
+ array_lengthof(Ops)), 0);
+ }
cast<MachineSDNode>(Ret)->setMemRefs(MemOp, MemOp + 1);
SDValue RetVals[] = { Undef, Ret };
return CurDAG->getMergeValues(RetVals, 2, dl).getNode();
case X86ISD::ATOMSUB64_DAG:
case X86ISD::ATOMNAND64_DAG:
case X86ISD::ATOMAND64_DAG:
+ case X86ISD::ATOMMAX64_DAG:
+ case X86ISD::ATOMMIN64_DAG:
+ case X86ISD::ATOMUMAX64_DAG:
+ case X86ISD::ATOMUMIN64_DAG:
case X86ISD::ATOMSWAP64_DAG: {
unsigned Opc;
switch (Opcode) {
- default: llvm_unreachable("Impossible intrinsic");
+ default: llvm_unreachable("Impossible opcode");
case X86ISD::ATOMOR64_DAG: Opc = X86::ATOMOR6432; break;
case X86ISD::ATOMXOR64_DAG: Opc = X86::ATOMXOR6432; break;
case X86ISD::ATOMADD64_DAG: Opc = X86::ATOMADD6432; break;
case X86ISD::ATOMSUB64_DAG: Opc = X86::ATOMSUB6432; break;
case X86ISD::ATOMNAND64_DAG: Opc = X86::ATOMNAND6432; break;
case X86ISD::ATOMAND64_DAG: Opc = X86::ATOMAND6432; break;
+ case X86ISD::ATOMMAX64_DAG: Opc = X86::ATOMMAX6432; break;
+ case X86ISD::ATOMMIN64_DAG: Opc = X86::ATOMMIN6432; break;
+ case X86ISD::ATOMUMAX64_DAG: Opc = X86::ATOMUMAX6432; break;
+ case X86ISD::ATOMUMIN64_DAG: Opc = X86::ATOMUMIN6432; break;
case X86ISD::ATOMSWAP64_DAG: Opc = X86::ATOMSWAP6432; break;
}
SDNode *RetVal = SelectAtomic64(Node, Opc);
break;
}
- case ISD::ATOMIC_LOAD_ADD: {
- SDNode *RetVal = SelectAtomicLoadAdd(Node, NVT);
- if (RetVal)
- return RetVal;
- break;
- }
case ISD::ATOMIC_LOAD_XOR:
case ISD::ATOMIC_LOAD_AND:
- case ISD::ATOMIC_LOAD_OR: {
+ case ISD::ATOMIC_LOAD_OR:
+ case ISD::ATOMIC_LOAD_ADD: {
SDNode *RetVal = SelectAtomicLoadArith(Node, NVT);
if (RetVal)
return RetVal;
// Make sure that we don't change the operation by removing bits.
// This only matters for OR and XOR, AND is unaffected.
- if (Opcode != ISD::AND && ((Val >> ShlVal) << ShlVal) != Val)
+ uint64_t RemovedBitsMask = (1ULL << ShlVal) - 1;
+ if (Opcode != ISD::AND && (Val & RemovedBitsMask) != 0)
break;
- unsigned ShlOp, Op = 0;
+ unsigned ShlOp, Op;
EVT CstVT = NVT;
// Check the minimum bitwidth for the new constant.
ShlOp = X86::SHL32ri;
switch (Opcode) {
+ default: llvm_unreachable("Impossible opcode");
case ISD::AND: Op = X86::AND32ri8; break;
case ISD::OR: Op = X86::OR32ri8; break;
case ISD::XOR: Op = X86::XOR32ri8; break;
ShlOp = X86::SHL64ri;
switch (Opcode) {
+ default: llvm_unreachable("Impossible opcode");
case ISD::AND: Op = CstVT==MVT::i8? X86::AND64ri8 : X86::AND64ri32; break;
case ISD::OR: Op = CstVT==MVT::i8? X86::OR64ri8 : X86::OR64ri32; break;
case ISD::XOR: Op = CstVT==MVT::i8? X86::XOR64ri8 : X86::XOR64ri32; break;
SDValue N1 = Node->getOperand(1);
bool isSigned = Opcode == ISD::SMUL_LOHI;
+ bool hasBMI2 = Subtarget->hasBMI2();
if (!isSigned) {
switch (NVT.getSimpleVT().SimpleTy) {
default: llvm_unreachable("Unsupported VT!");
case MVT::i8: Opc = X86::MUL8r; MOpc = X86::MUL8m; break;
case MVT::i16: Opc = X86::MUL16r; MOpc = X86::MUL16m; break;
- case MVT::i32: Opc = X86::MUL32r; MOpc = X86::MUL32m; break;
- case MVT::i64: Opc = X86::MUL64r; MOpc = X86::MUL64m; break;
+ case MVT::i32: Opc = hasBMI2 ? X86::MULX32rr : X86::MUL32r;
+ MOpc = hasBMI2 ? X86::MULX32rm : X86::MUL32m; break;
+ case MVT::i64: Opc = hasBMI2 ? X86::MULX64rr : X86::MUL64r;
+ MOpc = hasBMI2 ? X86::MULX64rm : X86::MUL64m; break;
}
} else {
switch (NVT.getSimpleVT().SimpleTy) {
}
}
- unsigned LoReg, HiReg;
- switch (NVT.getSimpleVT().SimpleTy) {
- default: llvm_unreachable("Unsupported VT!");
- case MVT::i8: LoReg = X86::AL; HiReg = X86::AH; break;
- case MVT::i16: LoReg = X86::AX; HiReg = X86::DX; break;
- case MVT::i32: LoReg = X86::EAX; HiReg = X86::EDX; break;
- case MVT::i64: LoReg = X86::RAX; HiReg = X86::RDX; break;
+ unsigned SrcReg, LoReg, HiReg;
+ switch (Opc) {
+ default: llvm_unreachable("Unknown MUL opcode!");
+ case X86::IMUL8r:
+ case X86::MUL8r:
+ SrcReg = LoReg = X86::AL; HiReg = X86::AH;
+ break;
+ case X86::IMUL16r:
+ case X86::MUL16r:
+ SrcReg = LoReg = X86::AX; HiReg = X86::DX;
+ break;
+ case X86::IMUL32r:
+ case X86::MUL32r:
+ SrcReg = LoReg = X86::EAX; HiReg = X86::EDX;
+ break;
+ case X86::IMUL64r:
+ case X86::MUL64r:
+ SrcReg = LoReg = X86::RAX; HiReg = X86::RDX;
+ break;
+ case X86::MULX32rr:
+ SrcReg = X86::EDX; LoReg = HiReg = 0;
+ break;
+ case X86::MULX64rr:
+ SrcReg = X86::RDX; LoReg = HiReg = 0;
+ break;
}
SDValue Tmp0, Tmp1, Tmp2, Tmp3, Tmp4;
std::swap(N0, N1);
}
- SDValue InFlag = CurDAG->getCopyToReg(CurDAG->getEntryNode(), dl, LoReg,
+ SDValue InFlag = CurDAG->getCopyToReg(CurDAG->getEntryNode(), dl, SrcReg,
N0, SDValue()).getValue(1);
+ SDValue ResHi, ResLo;
if (foldedLoad) {
+ SDValue Chain;
SDValue Ops[] = { Tmp0, Tmp1, Tmp2, Tmp3, Tmp4, N1.getOperand(0),
InFlag };
- SDNode *CNode =
- CurDAG->getMachineNode(MOpc, dl, MVT::Other, MVT::Glue, Ops,
- array_lengthof(Ops));
- InFlag = SDValue(CNode, 1);
+ if (MOpc == X86::MULX32rm || MOpc == X86::MULX64rm) {
+ SDVTList VTs = CurDAG->getVTList(NVT, NVT, MVT::Other, MVT::Glue);
+ SDNode *CNode = CurDAG->getMachineNode(MOpc, dl, VTs, Ops,
+ array_lengthof(Ops));
+ ResHi = SDValue(CNode, 0);
+ ResLo = SDValue(CNode, 1);
+ Chain = SDValue(CNode, 2);
+ InFlag = SDValue(CNode, 3);
+ } else {
+ SDVTList VTs = CurDAG->getVTList(MVT::Other, MVT::Glue);
+ SDNode *CNode = CurDAG->getMachineNode(MOpc, dl, VTs, Ops,
+ array_lengthof(Ops));
+ Chain = SDValue(CNode, 0);
+ InFlag = SDValue(CNode, 1);
+ }
// Update the chain.
- ReplaceUses(N1.getValue(1), SDValue(CNode, 0));
+ ReplaceUses(N1.getValue(1), Chain);
} else {
- SDNode *CNode = CurDAG->getMachineNode(Opc, dl, MVT::Glue, N1, InFlag);
- InFlag = SDValue(CNode, 0);
+ SDValue Ops[] = { N1, InFlag };
+ if (Opc == X86::MULX32rr || Opc == X86::MULX64rr) {
+ SDVTList VTs = CurDAG->getVTList(NVT, NVT, MVT::Glue);
+ SDNode *CNode = CurDAG->getMachineNode(Opc, dl, VTs, Ops,
+ array_lengthof(Ops));
+ ResHi = SDValue(CNode, 0);
+ ResLo = SDValue(CNode, 1);
+ InFlag = SDValue(CNode, 2);
+ } else {
+ SDVTList VTs = CurDAG->getVTList(MVT::Glue);
+ SDNode *CNode = CurDAG->getMachineNode(Opc, dl, VTs, Ops,
+ array_lengthof(Ops));
+ InFlag = SDValue(CNode, 0);
+ }
}
// Prevent use of AH in a REX instruction by referencing AX instead.
}
// Copy the low half of the result, if it is needed.
if (!SDValue(Node, 0).use_empty()) {
- SDValue Result = CurDAG->getCopyFromReg(CurDAG->getEntryNode(), dl,
- LoReg, NVT, InFlag);
- InFlag = Result.getValue(2);
- ReplaceUses(SDValue(Node, 0), Result);
- DEBUG(dbgs() << "=> "; Result.getNode()->dump(CurDAG); dbgs() << '\n');
+ if (ResLo.getNode() == 0) {
+ assert(LoReg && "Register for low half is not defined!");
+ ResLo = CurDAG->getCopyFromReg(CurDAG->getEntryNode(), dl, LoReg, NVT,
+ InFlag);
+ InFlag = ResLo.getValue(2);
+ }
+ ReplaceUses(SDValue(Node, 0), ResLo);
+ DEBUG(dbgs() << "=> "; ResLo.getNode()->dump(CurDAG); dbgs() << '\n');
}
// Copy the high half of the result, if it is needed.
if (!SDValue(Node, 1).use_empty()) {
- SDValue Result = CurDAG->getCopyFromReg(CurDAG->getEntryNode(), dl,
- HiReg, NVT, InFlag);
- InFlag = Result.getValue(2);
- ReplaceUses(SDValue(Node, 1), Result);
- DEBUG(dbgs() << "=> "; Result.getNode()->dump(CurDAG); dbgs() << '\n');
+ if (ResHi.getNode() == 0) {
+ assert(HiReg && "Register for high half is not defined!");
+ ResHi = CurDAG->getCopyFromReg(CurDAG->getEntryNode(), dl, HiReg, NVT,
+ InFlag);
+ InFlag = ResHi.getValue(2);
+ }
+ ReplaceUses(SDValue(Node, 1), ResHi);
+ DEBUG(dbgs() << "=> "; ResHi.getNode()->dump(CurDAG); dbgs() << '\n');
}
return NULL;
MVT::i8, Reg);
// Emit a testb.
- return CurDAG->getMachineNode(X86::TEST8ri, dl, MVT::i32, Subreg, Imm);
+ SDNode *NewNode = CurDAG->getMachineNode(X86::TEST8ri, dl, MVT::i32,
+ Subreg, Imm);
+ // Replace SUB|CMP with TEST, since SUB has two outputs while TEST has
+ // one, do not call ReplaceAllUsesWith.
+ ReplaceUses(SDValue(Node, (Opcode == X86ISD::SUB ? 1 : 0)),
+ SDValue(NewNode, 0));
+ return NULL;
}
// For example, "testl %eax, $2048" to "testb %ah, $8".
// Emit a testb. The EXTRACT_SUBREG becomes a COPY that can only
// target GR8_NOREX registers, so make sure the register class is
// forced.
- return CurDAG->getMachineNode(X86::TEST8ri_NOREX, dl, MVT::i32,
- Subreg, ShiftedImm);
+ SDNode *NewNode = CurDAG->getMachineNode(X86::TEST8ri_NOREX, dl,
+ MVT::i32, Subreg, ShiftedImm);
+ // Replace SUB|CMP with TEST, since SUB has two outputs while TEST has
+ // one, do not call ReplaceAllUsesWith.
+ ReplaceUses(SDValue(Node, (Opcode == X86ISD::SUB ? 1 : 0)),
+ SDValue(NewNode, 0));
+ return NULL;
}
// For example, "testl %eax, $32776" to "testw %ax, $32776".
MVT::i16, Reg);
// Emit a testw.
- return CurDAG->getMachineNode(X86::TEST16ri, dl, MVT::i32, Subreg, Imm);
+ SDNode *NewNode = CurDAG->getMachineNode(X86::TEST16ri, dl, MVT::i32,
+ Subreg, Imm);
+ // Replace SUB|CMP with TEST, since SUB has two outputs while TEST has
+ // one, do not call ReplaceAllUsesWith.
+ ReplaceUses(SDValue(Node, (Opcode == X86ISD::SUB ? 1 : 0)),
+ SDValue(NewNode, 0));
+ return NULL;
}
// For example, "testq %rax, $268468232" to "testl %eax, $268468232".
MVT::i32, Reg);
// Emit a testl.
- return CurDAG->getMachineNode(X86::TEST32ri, dl, MVT::i32, Subreg, Imm);
+ SDNode *NewNode = CurDAG->getMachineNode(X86::TEST32ri, dl, MVT::i32,
+ Subreg, Imm);
+ // Replace SUB|CMP with TEST, since SUB has two outputs while TEST has
+ // one, do not call ReplaceAllUsesWith.
+ ReplaceUses(SDValue(Node, (Opcode == X86ISD::SUB ? 1 : 0)),
+ SDValue(NewNode, 0));
+ return NULL;
}
}
break;
return Result;
}
-
- // FIXME: Custom handling because TableGen doesn't support multiple implicit
- // defs in an instruction pattern
- case X86ISD::PCMPESTRI: {
- SDValue N0 = Node->getOperand(0);
- SDValue N1 = Node->getOperand(1);
- SDValue N2 = Node->getOperand(2);
- SDValue N3 = Node->getOperand(3);
- SDValue N4 = Node->getOperand(4);
-
- // Make sure last argument is a constant
- ConstantSDNode *Cst = dyn_cast<ConstantSDNode>(N4);
- if (!Cst)
- break;
-
- uint64_t Imm = Cst->getZExtValue();
-
- SDValue InFlag = CurDAG->getCopyToReg(CurDAG->getEntryNode(), dl,
- X86::EAX, N1, SDValue()).getValue(1);
- InFlag = CurDAG->getCopyToReg(CurDAG->getEntryNode(), dl, X86::EDX,
- N3, InFlag).getValue(1);
-
- SDValue Ops[] = { N0, N2, getI8Imm(Imm), InFlag };
- unsigned Opc = Subtarget->hasAVX() ? X86::VPCMPESTRIrr :
- X86::PCMPESTRIrr;
- InFlag = SDValue(CurDAG->getMachineNode(Opc, dl, MVT::Glue, Ops,
- array_lengthof(Ops)), 0);
-
- if (!SDValue(Node, 0).use_empty()) {
- SDValue Result = CurDAG->getCopyFromReg(CurDAG->getEntryNode(), dl,
- X86::ECX, NVT, InFlag);
- InFlag = Result.getValue(2);
- ReplaceUses(SDValue(Node, 0), Result);
- }
- if (!SDValue(Node, 1).use_empty()) {
- SDValue Result = CurDAG->getCopyFromReg(CurDAG->getEntryNode(), dl,
- X86::EFLAGS, NVT, InFlag);
- InFlag = Result.getValue(2);
- ReplaceUses(SDValue(Node, 1), Result);
- }
-
- return NULL;
- }
-
- // FIXME: Custom handling because TableGen doesn't support multiple implicit
- // defs in an instruction pattern
- case X86ISD::PCMPISTRI: {
- SDValue N0 = Node->getOperand(0);
- SDValue N1 = Node->getOperand(1);
- SDValue N2 = Node->getOperand(2);
-
- // Make sure last argument is a constant
- ConstantSDNode *Cst = dyn_cast<ConstantSDNode>(N2);
- if (!Cst)
- break;
-
- uint64_t Imm = Cst->getZExtValue();
-
- SDValue Ops[] = { N0, N1, getI8Imm(Imm) };
- unsigned Opc = Subtarget->hasAVX() ? X86::VPCMPISTRIrr :
- X86::PCMPISTRIrr;
- SDValue InFlag = SDValue(CurDAG->getMachineNode(Opc, dl, MVT::Glue, Ops,
- array_lengthof(Ops)), 0);
-
- if (!SDValue(Node, 0).use_empty()) {
- SDValue Result = CurDAG->getCopyFromReg(CurDAG->getEntryNode(), dl,
- X86::ECX, NVT, InFlag);
- InFlag = Result.getValue(2);
- ReplaceUses(SDValue(Node, 0), Result);
- }
- if (!SDValue(Node, 1).use_empty()) {
- SDValue Result = CurDAG->getCopyFromReg(CurDAG->getEntryNode(), dl,
- X86::EFLAGS, NVT, InFlag);
- InFlag = Result.getValue(2);
- ReplaceUses(SDValue(Node, 1), Result);
- }
-
- return NULL;
- }
}
SDNode *ResNode = SelectCode(Node);
projects / oota-llvm.git / blobdiff