//
//===----------------------------------------------------------------------===//
//
-// R600 Tablegen instruction definitions
+// TableGen definitions for instructions which are available on R600 family
+// GPUs.
//
//===----------------------------------------------------------------------===//
class R600_1OP_Helper <bits<11> inst, string opName, SDPatternOperator node,
InstrItinClass itin = AnyALU> :
R600_1OP <inst, opName,
- [(set R600_Reg32:$dst, (node R600_Reg32:$src0))]
+ [(set R600_Reg32:$dst, (node R600_Reg32:$src0))], itin
>;
// If you add or change the operands for R600_2OP instructions, you must
}
class R600_2OP_Helper <bits<11> inst, string opName, SDPatternOperator node,
- InstrItinClass itim = AnyALU> :
+ InstrItinClass itin = AnyALU> :
R600_2OP <inst, opName,
[(set R600_Reg32:$dst, (node R600_Reg32:$src0,
- R600_Reg32:$src1))]
+ R600_Reg32:$src1))], itin
>;
// If you add our change the operands for R600_3OP instructions, you must
def TEX_SHADOW : PatLeaf<
(imm),
[{uint32_t TType = (uint32_t)N->getZExtValue();
- return (TType >= 6 && TType <= 8) || (TType >= 11 && TType <= 13);
+ return (TType >= 6 && TType <= 8) || TType == 13;
}]
>;
def load_param_exti16 : LoadParamFrag<az_extloadi16>;
def isR600 : Predicate<"Subtarget.getGeneration() <= AMDGPUSubtarget::R700">;
-def isR700 : Predicate<"Subtarget.getGeneration() == AMDGPUSubtarget::R700">;
-def isEG : Predicate<
- "Subtarget.getGeneration() >= AMDGPUSubtarget::EVERGREEN && "
- "Subtarget.getGeneration() < AMDGPUSubtarget::SOUTHERN_ISLANDS && "
- "!Subtarget.hasCaymanISA()">;
-
-def isCayman : Predicate<"Subtarget.hasCaymanISA()">;
-def isEGorCayman : Predicate<"Subtarget.getGeneration() == "
- "AMDGPUSubtarget::EVERGREEN"
- "|| Subtarget.getGeneration() =="
- "AMDGPUSubtarget::NORTHERN_ISLANDS">;
def isR600toCayman : Predicate<
"Subtarget.getGeneration() <= AMDGPUSubtarget::NORTHERN_ISLANDS">;
>;
def FRACT : R600_1OP_Helper <0x10, "FRACT", AMDGPUfract>;
-def TRUNC : R600_1OP_Helper <0x11, "TRUNC", int_AMDGPU_trunc>;
+def TRUNC : R600_1OP_Helper <0x11, "TRUNC", ftrunc>;
def CEIL : R600_1OP_Helper <0x12, "CEIL", fceil>;
def RNDNE : R600_1OP_Helper <0x13, "RNDNE", frint>;
def FLOOR : R600_1OP_Helper <0x14, "FLOOR", ffloor>;
-// Add also ftrunc intrinsic pattern
-def : Pat<(ftrunc f32:$src0), (TRUNC $src0)>;
-
def MOV : R600_1OP <0x19, "MOV", []>;
let isPseudo = 1, isCodeGenOnly = 1, usesCustomInserter = 1 in {
[(set f32:$dst, (fadd (fmul f32:$src0, f32:$src1), f32:$src2))]
>;
+class FMA_Common <bits<5> inst> : R600_3OP <
+ inst, "FMA",
+ [(set f32:$dst, (fma f32:$src0, f32:$src1, f32:$src2))], VecALU
+>;
+
class CNDE_Common <bits<5> inst> : R600_3OP <
inst, "CNDE",
[(set f32:$dst, (selectcc f32:$src0, FP_ZERO, f32:$src1, f32:$src2, COND_OEQ))]
}
class RECIP_IEEE_Common <bits<11> inst> : R600_1OP <
- inst, "RECIP_IEEE", [(set f32:$dst, (fdiv FP_ONE, f32:$src0))]
+ inst, "RECIP_IEEE", [(set f32:$dst, (AMDGPUrcp f32:$src0))]
> {
let Itinerary = TransALU;
}
let Itinerary = TransALU;
}
+// Clamped to maximum.
class RECIPSQRT_CLAMPED_Common <bits<11> inst> : R600_1OP_Helper <
- inst, "RECIPSQRT_CLAMPED", int_AMDGPU_rsq
+ inst, "RECIPSQRT_CLAMPED", AMDGPUrsq_clamped
> {
let Itinerary = TransALU;
}
-class RECIPSQRT_IEEE_Common <bits<11> inst> : R600_1OP <
- inst, "RECIPSQRT_IEEE", []
+class RECIPSQRT_IEEE_Common <bits<11> inst> : R600_1OP_Helper <
+ inst, "RECIPSQRT_IEEE", AMDGPUrsq_legacy
> {
let Itinerary = TransALU;
}
+// TODO: There is also RECIPSQRT_FF which clamps to zero.
+
class SIN_Common <bits<11> inst> : R600_1OP <
inst, "SIN", [(set f32:$dst, (SIN_HW f32:$src0))]>{
let Trig = 1;
// Helper patterns for complex intrinsics
//===----------------------------------------------------------------------===//
+// FIXME: Should be predicated on unsafe fp math.
multiclass DIV_Common <InstR600 recip_ieee> {
def : Pat<
(int_AMDGPU_div f32:$src0, f32:$src1),
(fdiv f32:$src0, f32:$src1),
(MUL_IEEE $src0, (recip_ieee $src1))
>;
+
+def : RcpPat<recip_ieee, f32>;
}
class TGSI_LIT_Z_Common <InstR600 mul_lit, InstR600 log_clamped, InstR600 exp_ieee>
>;
// FROUND pattern
-class FROUNDPat<Instruction CNDGE> : Pat <
+class FROUNDPat<Instruction CNDGE, Instruction CNDGT> : Pat <
(AMDGPUround f32:$x),
- (CNDGE (ADD (FNEG_R600 (f32 HALF)), (FRACT $x)), (CEIL $x), (FLOOR $x))
+ (CNDGE $x,
+ (CNDGE (ADD (FNEG_R600 (f32 HALF)), (FRACT $x)), (CEIL $x), (FLOOR $x)),
+ (CNDGT (ADD (FNEG_R600 (f32 HALF)), (FRACT $x)), (CEIL $x), (FLOOR $x))
+ )
>;
def TGSI_LIT_Z_r600 : TGSI_LIT_Z_Common<MUL_LIT_r600, LOG_CLAMPED_r600, EXP_IEEE_r600>;
def : Pat<(fsqrt f32:$src), (MUL $src, (RECIPSQRT_CLAMPED_r600 $src))>;
- def : FROUNDPat <CNDGE_r600>;
+ defm : RsqPat<RECIPSQRT_IEEE_r600, f32>;
+
+ def : FROUNDPat <CNDGE_r600, CNDGT_r600>;
def R600_ExportSwz : ExportSwzInst {
let Word1{20-17} = 0; // BURST_COUNT
}
-//===----------------------------------------------------------------------===//
-// R700 Only instructions
-//===----------------------------------------------------------------------===//
-
-let Predicates = [isR700] in {
- def SIN_r700 : SIN_Common<0x6E>;
- def COS_r700 : COS_Common<0x6F>;
-}
-
-//===----------------------------------------------------------------------===//
-// Evergreen / Cayman store instructions
-//===----------------------------------------------------------------------===//
-
-let Predicates = [isEGorCayman] in {
-
-class CF_MEM_RAT_CACHELESS <bits<6> rat_inst, bits<4> rat_id, bits<4> mask, dag ins,
- string name, list<dag> pattern>
- : EG_CF_RAT <0x57, rat_inst, rat_id, mask, (outs), ins,
- "MEM_RAT_CACHELESS "#name, pattern>;
-
-class CF_MEM_RAT <bits<6> rat_inst, bits<4> rat_id, dag ins, string name,
- list<dag> pattern>
- : EG_CF_RAT <0x56, rat_inst, rat_id, 0xf /* mask */, (outs), ins,
- "MEM_RAT "#name, pattern>;
-
-def RAT_MSKOR : CF_MEM_RAT <0x11, 0,
- (ins R600_Reg128:$rw_gpr, R600_TReg32_X:$index_gpr),
- "MSKOR $rw_gpr.XW, $index_gpr",
- [(mskor_global v4i32:$rw_gpr, i32:$index_gpr)]
-> {
- let eop = 0;
-}
-
-} // End Predicates = [isEGorCayman]
-
-
-//===----------------------------------------------------------------------===//
-// Evergreen Only instructions
-//===----------------------------------------------------------------------===//
-
-let Predicates = [isEG] in {
-
-def RECIP_IEEE_eg : RECIP_IEEE_Common<0x86>;
-defm DIV_eg : DIV_Common<RECIP_IEEE_eg>;
-
-def MULLO_INT_eg : MULLO_INT_Common<0x8F>;
-def MULHI_INT_eg : MULHI_INT_Common<0x90>;
-def MULLO_UINT_eg : MULLO_UINT_Common<0x91>;
-def MULHI_UINT_eg : MULHI_UINT_Common<0x92>;
-def RECIP_UINT_eg : RECIP_UINT_Common<0x94>;
-def RECIPSQRT_CLAMPED_eg : RECIPSQRT_CLAMPED_Common<0x87>;
-def EXP_IEEE_eg : EXP_IEEE_Common<0x81>;
-def LOG_IEEE_eg : LOG_IEEE_Common<0x83>;
-def RECIP_CLAMPED_eg : RECIP_CLAMPED_Common<0x84>;
-def RECIPSQRT_IEEE_eg : RECIPSQRT_IEEE_Common<0x89>;
-def SIN_eg : SIN_Common<0x8D>;
-def COS_eg : COS_Common<0x8E>;
-
-def : POW_Common <LOG_IEEE_eg, EXP_IEEE_eg, MUL>;
-def : Pat<(fsqrt f32:$src), (MUL $src, (RECIPSQRT_CLAMPED_eg $src))>;
-
-//===----------------------------------------------------------------------===//
-// Memory read/write instructions
-//===----------------------------------------------------------------------===//
-
-let usesCustomInserter = 1 in {
-
-// 32-bit store
-def RAT_WRITE_CACHELESS_32_eg : CF_MEM_RAT_CACHELESS <0x2, 0, 0x1,
- (ins R600_TReg32_X:$rw_gpr, R600_TReg32_X:$index_gpr, InstFlag:$eop),
- "STORE_RAW $rw_gpr, $index_gpr, $eop",
- [(global_store i32:$rw_gpr, i32:$index_gpr)]
->;
-
-// 64-bit store
-def RAT_WRITE_CACHELESS_64_eg : CF_MEM_RAT_CACHELESS <0x2, 0, 0x3,
- (ins R600_Reg64:$rw_gpr, R600_TReg32_X:$index_gpr, InstFlag:$eop),
- "STORE_RAW $rw_gpr.XY, $index_gpr, $eop",
- [(global_store v2i32:$rw_gpr, i32:$index_gpr)]
->;
-
-//128-bit store
-def RAT_WRITE_CACHELESS_128_eg : CF_MEM_RAT_CACHELESS <0x2, 0, 0xf,
- (ins R600_Reg128:$rw_gpr, R600_TReg32_X:$index_gpr, InstFlag:$eop),
- "STORE_RAW $rw_gpr.XYZW, $index_gpr, $eop",
- [(global_store v4i32:$rw_gpr, i32:$index_gpr)]
->;
-
-} // End usesCustomInserter = 1
-
-class VTX_READ_eg <string name, bits<8> buffer_id, dag outs, list<dag> pattern>
- : VTX_WORD0_eg, VTX_READ<name, buffer_id, outs, pattern> {
-
- // Static fields
- let VC_INST = 0;
- let FETCH_TYPE = 2;
- let FETCH_WHOLE_QUAD = 0;
- let BUFFER_ID = buffer_id;
- let SRC_REL = 0;
- // XXX: We can infer this field based on the SRC_GPR. This would allow us
- // to store vertex addresses in any channel, not just X.
- let SRC_SEL_X = 0;
-
- let Inst{31-0} = Word0;
-}
-
-class VTX_READ_8_eg <bits<8> buffer_id, list<dag> pattern>
- : VTX_READ_eg <"VTX_READ_8 $dst_gpr, $src_gpr", buffer_id,
- (outs R600_TReg32_X:$dst_gpr), pattern> {
-
- let MEGA_FETCH_COUNT = 1;
- let DST_SEL_X = 0;
- let DST_SEL_Y = 7; // Masked
- let DST_SEL_Z = 7; // Masked
- let DST_SEL_W = 7; // Masked
- let DATA_FORMAT = 1; // FMT_8
-}
-
-class VTX_READ_16_eg <bits<8> buffer_id, list<dag> pattern>
- : VTX_READ_eg <"VTX_READ_16 $dst_gpr, $src_gpr", buffer_id,
- (outs R600_TReg32_X:$dst_gpr), pattern> {
- let MEGA_FETCH_COUNT = 2;
- let DST_SEL_X = 0;
- let DST_SEL_Y = 7; // Masked
- let DST_SEL_Z = 7; // Masked
- let DST_SEL_W = 7; // Masked
- let DATA_FORMAT = 5; // FMT_16
-
-}
-
-class VTX_READ_32_eg <bits<8> buffer_id, list<dag> pattern>
- : VTX_READ_eg <"VTX_READ_32 $dst_gpr, $src_gpr", buffer_id,
- (outs R600_TReg32_X:$dst_gpr), pattern> {
-
- let MEGA_FETCH_COUNT = 4;
- let DST_SEL_X = 0;
- let DST_SEL_Y = 7; // Masked
- let DST_SEL_Z = 7; // Masked
- let DST_SEL_W = 7; // Masked
- let DATA_FORMAT = 0xD; // COLOR_32
-
- // This is not really necessary, but there were some GPU hangs that appeared
- // to be caused by ALU instructions in the next instruction group that wrote
- // to the $src_gpr registers of the VTX_READ.
- // e.g.
- // %T3_X<def> = VTX_READ_PARAM_32_eg %T2_X<kill>, 24
- // %T2_X<def> = MOV %ZERO
- //Adding this constraint prevents this from happening.
- let Constraints = "$src_gpr.ptr = $dst_gpr";
-}
-
-class VTX_READ_64_eg <bits<8> buffer_id, list<dag> pattern>
- : VTX_READ_eg <"VTX_READ_64 $dst_gpr.XY, $src_gpr", buffer_id,
- (outs R600_Reg64:$dst_gpr), pattern> {
-
- let MEGA_FETCH_COUNT = 8;
- let DST_SEL_X = 0;
- let DST_SEL_Y = 1;
- let DST_SEL_Z = 7;
- let DST_SEL_W = 7;
- let DATA_FORMAT = 0x1D; // COLOR_32_32
-}
-
-class VTX_READ_128_eg <bits<8> buffer_id, list<dag> pattern>
- : VTX_READ_eg <"VTX_READ_128 $dst_gpr.XYZW, $src_gpr", buffer_id,
- (outs R600_Reg128:$dst_gpr), pattern> {
-
- let MEGA_FETCH_COUNT = 16;
- let DST_SEL_X = 0;
- let DST_SEL_Y = 1;
- let DST_SEL_Z = 2;
- let DST_SEL_W = 3;
- let DATA_FORMAT = 0x22; // COLOR_32_32_32_32
-
- // XXX: Need to force VTX_READ_128 instructions to write to the same register
- // that holds its buffer address to avoid potential hangs. We can't use
- // the same constraint as VTX_READ_32_eg, because the $src_gpr.ptr and $dst
- // registers are different sizes.
-}
-
-//===----------------------------------------------------------------------===//
-// VTX Read from parameter memory space
-//===----------------------------------------------------------------------===//
-
-def VTX_READ_PARAM_8_eg : VTX_READ_8_eg <0,
- [(set i32:$dst_gpr, (load_param_exti8 ADDRVTX_READ:$src_gpr))]
->;
-
-def VTX_READ_PARAM_16_eg : VTX_READ_16_eg <0,
- [(set i32:$dst_gpr, (load_param_exti16 ADDRVTX_READ:$src_gpr))]
->;
-
-def VTX_READ_PARAM_32_eg : VTX_READ_32_eg <0,
- [(set i32:$dst_gpr, (load_param ADDRVTX_READ:$src_gpr))]
->;
-
-def VTX_READ_PARAM_64_eg : VTX_READ_64_eg <0,
- [(set v2i32:$dst_gpr, (load_param ADDRVTX_READ:$src_gpr))]
->;
-
-def VTX_READ_PARAM_128_eg : VTX_READ_128_eg <0,
- [(set v4i32:$dst_gpr, (load_param ADDRVTX_READ:$src_gpr))]
->;
-
-//===----------------------------------------------------------------------===//
-// VTX Read from global memory space
-//===----------------------------------------------------------------------===//
-
-// 8-bit reads
-def VTX_READ_GLOBAL_8_eg : VTX_READ_8_eg <1,
- [(set i32:$dst_gpr, (az_extloadi8_global ADDRVTX_READ:$src_gpr))]
->;
-
-def VTX_READ_GLOBAL_16_eg : VTX_READ_16_eg <1,
- [(set i32:$dst_gpr, (az_extloadi16_global ADDRVTX_READ:$src_gpr))]
->;
-
-// 32-bit reads
-def VTX_READ_GLOBAL_32_eg : VTX_READ_32_eg <1,
- [(set i32:$dst_gpr, (global_load ADDRVTX_READ:$src_gpr))]
->;
-
-// 64-bit reads
-def VTX_READ_GLOBAL_64_eg : VTX_READ_64_eg <1,
- [(set v2i32:$dst_gpr, (global_load ADDRVTX_READ:$src_gpr))]
->;
-
-// 128-bit reads
-def VTX_READ_GLOBAL_128_eg : VTX_READ_128_eg <1,
- [(set v4i32:$dst_gpr, (global_load ADDRVTX_READ:$src_gpr))]
->;
-
-} // End Predicates = [isEG]
-
-//===----------------------------------------------------------------------===//
-// Evergreen / Cayman Instructions
-//===----------------------------------------------------------------------===//
-
-let Predicates = [isEGorCayman] in {
-
- // BFE_UINT - bit_extract, an optimization for mask and shift
- // Src0 = Input
- // Src1 = Offset
- // Src2 = Width
- //
- // bit_extract = (Input << (32 - Offset - Width)) >> (32 - Width)
- //
- // Example Usage:
- // (Offset, Width)
- //
- // (0, 8) = (Input << 24) >> 24 = (Input & 0xff) >> 0
- // (8, 8) = (Input << 16) >> 24 = (Input & 0xffff) >> 8
- // (16,8) = (Input << 8) >> 24 = (Input & 0xffffff) >> 16
- // (24,8) = (Input << 0) >> 24 = (Input & 0xffffffff) >> 24
- def BFE_UINT_eg : R600_3OP <0x4, "BFE_UINT",
- [(set i32:$dst, (int_AMDIL_bit_extract_u32 i32:$src0, i32:$src1,
- i32:$src2))],
- VecALU
- >;
-// XXX: This pattern is broken, disabling for now. See comment in
-// AMDGPUInstructions.td for more info.
-// def : BFEPattern <BFE_UINT_eg>;
-
- def BFI_INT_eg : R600_3OP <0x06, "BFI_INT", [], VecALU>;
- defm : BFIPatterns <BFI_INT_eg>;
-
- def MULADD_UINT24_eg : R600_3OP <0x10, "MULADD_UINT24",
- [(set i32:$dst, (add (mul U24:$src0, U24:$src1), i32:$src2))], VecALU
- >;
- def BIT_ALIGN_INT_eg : R600_3OP <0xC, "BIT_ALIGN_INT", [], VecALU>;
- def : ROTRPattern <BIT_ALIGN_INT_eg>;
-
- def MULADD_eg : MULADD_Common<0x14>;
- def MULADD_IEEE_eg : MULADD_IEEE_Common<0x18>;
- def ASHR_eg : ASHR_Common<0x15>;
- def LSHR_eg : LSHR_Common<0x16>;
- def LSHL_eg : LSHL_Common<0x17>;
- def CNDE_eg : CNDE_Common<0x19>;
- def CNDGT_eg : CNDGT_Common<0x1A>;
- def CNDGE_eg : CNDGE_Common<0x1B>;
- def MUL_LIT_eg : MUL_LIT_Common<0x1F>;
- def LOG_CLAMPED_eg : LOG_CLAMPED_Common<0x82>;
- def MUL_UINT24_eg : R600_2OP <0xB5, "MUL_UINT24",
- [(set i32:$dst, (mul U24:$src0, U24:$src1))], VecALU
- >;
- def DOT4_eg : DOT4_Common<0xBE>;
- defm CUBE_eg : CUBE_Common<0xC0>;
-
-let hasSideEffects = 1 in {
- def MOVA_INT_eg : R600_1OP <0xCC, "MOVA_INT", [], VecALU>;
-}
-
- def TGSI_LIT_Z_eg : TGSI_LIT_Z_Common<MUL_LIT_eg, LOG_CLAMPED_eg, EXP_IEEE_eg>;
-
- def FLT_TO_INT_eg : FLT_TO_INT_Common<0x50> {
- let Pattern = [];
- let Itinerary = AnyALU;
- }
-
- def INT_TO_FLT_eg : INT_TO_FLT_Common<0x9B>;
-
- def FLT_TO_UINT_eg : FLT_TO_UINT_Common<0x9A> {
- let Pattern = [];
- }
-
- def UINT_TO_FLT_eg : UINT_TO_FLT_Common<0x9C>;
-
-def GROUP_BARRIER : InstR600 <
- (outs), (ins), " GROUP_BARRIER", [(int_AMDGPU_barrier_local)], AnyALU>,
- R600ALU_Word0,
- R600ALU_Word1_OP2 <0x54> {
-
- let dst = 0;
- let dst_rel = 0;
- let src0 = 0;
- let src0_rel = 0;
- let src0_neg = 0;
- let src0_abs = 0;
- let src1 = 0;
- let src1_rel = 0;
- let src1_neg = 0;
- let src1_abs = 0;
- let write = 0;
- let omod = 0;
- let clamp = 0;
- let last = 1;
- let bank_swizzle = 0;
- let pred_sel = 0;
- let update_exec_mask = 0;
- let update_pred = 0;
-
- let Inst{31-0} = Word0;
- let Inst{63-32} = Word1;
-
- let ALUInst = 1;
-}
-
-//===----------------------------------------------------------------------===//
-// LDS Instructions
-//===----------------------------------------------------------------------===//
-class R600_LDS <bits<6> op, dag outs, dag ins, string asm,
- list<dag> pattern = []> :
-
- InstR600 <outs, ins, asm, pattern, XALU>,
- R600_ALU_LDS_Word0,
- R600LDS_Word1 {
-
- bits<6> offset = 0;
- let lds_op = op;
-
- let Word1{27} = offset{0};
- let Word1{12} = offset{1};
- let Word1{28} = offset{2};
- let Word1{31} = offset{3};
- let Word0{12} = offset{4};
- let Word0{25} = offset{5};
-
-
- let Inst{31-0} = Word0;
- let Inst{63-32} = Word1;
-
- let ALUInst = 1;
- let HasNativeOperands = 1;
- let UseNamedOperandTable = 1;
-}
-
-class R600_LDS_1A <bits<6> lds_op, string name, list<dag> pattern> : R600_LDS <
- lds_op,
- (outs R600_Reg32:$dst),
- (ins R600_Reg32:$src0, REL:$src0_rel, SEL:$src0_sel,
- LAST:$last, R600_Pred:$pred_sel,
- BANK_SWIZZLE:$bank_swizzle),
- " "#name#" $last OQAP, $src0$src0_rel $pred_sel",
- pattern
- > {
-
- let src1 = 0;
- let src1_rel = 0;
- let src2 = 0;
- let src2_rel = 0;
-
- let Defs = [OQAP];
- let usesCustomInserter = 1;
- let LDS_1A = 1;
- let DisableEncoding = "$dst";
-}
-
-class R600_LDS_1A1D <bits<6> lds_op, dag outs, string name, list<dag> pattern,
- string dst =""> :
- R600_LDS <
- lds_op, outs,
- (ins R600_Reg32:$src0, REL:$src0_rel, SEL:$src0_sel,
- R600_Reg32:$src1, REL:$src1_rel, SEL:$src1_sel,
- LAST:$last, R600_Pred:$pred_sel,
- BANK_SWIZZLE:$bank_swizzle),
- " "#name#" $last "#dst#"$src0$src0_rel, $src1$src1_rel, $pred_sel",
- pattern
- > {
-
- field string BaseOp;
-
- let src2 = 0;
- let src2_rel = 0;
- let LDS_1A1D = 1;
-}
-
-class R600_LDS_1A1D_NORET <bits<6> lds_op, string name, list<dag> pattern> :
- R600_LDS_1A1D <lds_op, (outs), name, pattern> {
- let BaseOp = name;
-}
-
-class R600_LDS_1A1D_RET <bits<6> lds_op, string name, list<dag> pattern> :
- R600_LDS_1A1D <lds_op, (outs R600_Reg32:$dst), name##"_RET", pattern, "OQAP, "> {
-
- let BaseOp = name;
- let usesCustomInserter = 1;
- let DisableEncoding = "$dst";
- let Defs = [OQAP];
-}
-
-class R600_LDS_1A2D <bits<6> lds_op, string name, list<dag> pattern> :
- R600_LDS <
- lds_op,
- (outs),
- (ins R600_Reg32:$src0, REL:$src0_rel, SEL:$src0_sel,
- R600_Reg32:$src1, REL:$src1_rel, SEL:$src1_sel,
- R600_Reg32:$src2, REL:$src2_rel, SEL:$src2_sel,
- LAST:$last, R600_Pred:$pred_sel, BANK_SWIZZLE:$bank_swizzle),
- " "#name# "$last $src0$src0_rel, $src1$src1_rel, $src2$src2_rel, $pred_sel",
- pattern> {
- let LDS_1A2D = 1;
-}
-
-def LDS_ADD : R600_LDS_1A1D_NORET <0x0, "LDS_ADD", [] >;
-def LDS_SUB : R600_LDS_1A1D_NORET <0x1, "LDS_SUB", [] >;
-def LDS_WRITE : R600_LDS_1A1D_NORET <0xD, "LDS_WRITE",
- [(local_store (i32 R600_Reg32:$src1), R600_Reg32:$src0)]
->;
-def LDS_BYTE_WRITE : R600_LDS_1A1D_NORET<0x12, "LDS_BYTE_WRITE",
- [(truncstorei8_local i32:$src1, i32:$src0)]
->;
-def LDS_SHORT_WRITE : R600_LDS_1A1D_NORET<0x13, "LDS_SHORT_WRITE",
- [(truncstorei16_local i32:$src1, i32:$src0)]
->;
-def LDS_ADD_RET : R600_LDS_1A1D_RET <0x20, "LDS_ADD",
- [(set i32:$dst, (atomic_load_add_local i32:$src0, i32:$src1))]
->;
-def LDS_SUB_RET : R600_LDS_1A1D_RET <0x21, "LDS_SUB",
- [(set i32:$dst, (atomic_load_sub_local i32:$src0, i32:$src1))]
->;
-def LDS_READ_RET : R600_LDS_1A <0x32, "LDS_READ_RET",
- [(set (i32 R600_Reg32:$dst), (local_load R600_Reg32:$src0))]
->;
-def LDS_BYTE_READ_RET : R600_LDS_1A <0x36, "LDS_BYTE_READ_RET",
- [(set i32:$dst, (sextloadi8_local i32:$src0))]
->;
-def LDS_UBYTE_READ_RET : R600_LDS_1A <0x37, "LDS_UBYTE_READ_RET",
- [(set i32:$dst, (az_extloadi8_local i32:$src0))]
->;
-def LDS_SHORT_READ_RET : R600_LDS_1A <0x38, "LDS_SHORT_READ_RET",
- [(set i32:$dst, (sextloadi16_local i32:$src0))]
->;
-def LDS_USHORT_READ_RET : R600_LDS_1A <0x39, "LDS_USHORT_READ_RET",
- [(set i32:$dst, (az_extloadi16_local i32:$src0))]
->;
-
- // TRUNC is used for the FLT_TO_INT instructions to work around a
- // perceived problem where the rounding modes are applied differently
- // depending on the instruction and the slot they are in.
- // See:
- // https://bugs.freedesktop.org/show_bug.cgi?id=50232
- // Mesa commit: a1a0974401c467cb86ef818f22df67c21774a38c
- //
- // XXX: Lowering SELECT_CC will sometimes generate fp_to_[su]int nodes,
- // which do not need to be truncated since the fp values are 0.0f or 1.0f.
- // We should look into handling these cases separately.
- def : Pat<(fp_to_sint f32:$src0), (FLT_TO_INT_eg (TRUNC $src0))>;
-
- def : Pat<(fp_to_uint f32:$src0), (FLT_TO_UINT_eg (TRUNC $src0))>;
-
- // SHA-256 Patterns
- def : SHA256MaPattern <BFI_INT_eg, XOR_INT>;
-
- def : FROUNDPat <CNDGE_eg>;
-
- def EG_ExportSwz : ExportSwzInst {
- let Word1{19-16} = 0; // BURST_COUNT
- let Word1{20} = 0; // VALID_PIXEL_MODE
- let Word1{21} = eop;
- let Word1{29-22} = inst;
- let Word1{30} = 0; // MARK
- let Word1{31} = 1; // BARRIER
- }
- defm : ExportPattern<EG_ExportSwz, 83>;
-
- def EG_ExportBuf : ExportBufInst {
- let Word1{19-16} = 0; // BURST_COUNT
- let Word1{20} = 0; // VALID_PIXEL_MODE
- let Word1{21} = eop;
- let Word1{29-22} = inst;
- let Word1{30} = 0; // MARK
- let Word1{31} = 1; // BARRIER
- }
- defm : SteamOutputExportPattern<EG_ExportBuf, 0x40, 0x41, 0x42, 0x43>;
-
- def CF_TC_EG : CF_CLAUSE_EG<1, (ins i32imm:$ADDR, i32imm:$COUNT),
- "TEX $COUNT @$ADDR"> {
- let POP_COUNT = 0;
- }
- def CF_VC_EG : CF_CLAUSE_EG<2, (ins i32imm:$ADDR, i32imm:$COUNT),
- "VTX $COUNT @$ADDR"> {
- let POP_COUNT = 0;
- }
- def WHILE_LOOP_EG : CF_CLAUSE_EG<6, (ins i32imm:$ADDR),
- "LOOP_START_DX10 @$ADDR"> {
- let POP_COUNT = 0;
- let COUNT = 0;
- }
- def END_LOOP_EG : CF_CLAUSE_EG<5, (ins i32imm:$ADDR), "END_LOOP @$ADDR"> {
- let POP_COUNT = 0;
- let COUNT = 0;
- }
- def LOOP_BREAK_EG : CF_CLAUSE_EG<9, (ins i32imm:$ADDR),
- "LOOP_BREAK @$ADDR"> {
- let POP_COUNT = 0;
- let COUNT = 0;
- }
- def CF_CONTINUE_EG : CF_CLAUSE_EG<8, (ins i32imm:$ADDR),
- "CONTINUE @$ADDR"> {
- let POP_COUNT = 0;
- let COUNT = 0;
- }
- def CF_JUMP_EG : CF_CLAUSE_EG<10, (ins i32imm:$ADDR, i32imm:$POP_COUNT),
- "JUMP @$ADDR POP:$POP_COUNT"> {
- let COUNT = 0;
- }
- def CF_PUSH_EG : CF_CLAUSE_EG<11, (ins i32imm:$ADDR, i32imm:$POP_COUNT),
- "PUSH @$ADDR POP:$POP_COUNT"> {
- let COUNT = 0;
- }
- def CF_ELSE_EG : CF_CLAUSE_EG<13, (ins i32imm:$ADDR, i32imm:$POP_COUNT),
- "ELSE @$ADDR POP:$POP_COUNT"> {
- let COUNT = 0;
- }
- def CF_CALL_FS_EG : CF_CLAUSE_EG<19, (ins), "CALL_FS"> {
- let ADDR = 0;
- let COUNT = 0;
- let POP_COUNT = 0;
- }
- def POP_EG : CF_CLAUSE_EG<14, (ins i32imm:$ADDR, i32imm:$POP_COUNT),
- "POP @$ADDR POP:$POP_COUNT"> {
- let COUNT = 0;
- }
- def CF_END_EG : CF_CLAUSE_EG<0, (ins), "CF_END"> {
- let COUNT = 0;
- let POP_COUNT = 0;
- let ADDR = 0;
- let END_OF_PROGRAM = 1;
- }
-
-} // End Predicates = [isEGorCayman]
//===----------------------------------------------------------------------===//
// Regist loads and stores - for indirect addressing
defm R600_ : RegisterLoadStore <R600_Reg32, FRAMEri, ADDRIndirect>;
-//===----------------------------------------------------------------------===//
-// Cayman Instructions
-//===----------------------------------------------------------------------===//
-
-let Predicates = [isCayman] in {
-
-def MULADD_INT24_cm : R600_3OP <0x08, "MULADD_INT24",
- [(set i32:$dst, (add (mul I24:$src0, I24:$src1), i32:$src2))], VecALU
->;
-def MUL_INT24_cm : R600_2OP <0x5B, "MUL_INT24",
- [(set i32:$dst, (mul I24:$src0, I24:$src1))], VecALU
->;
-
-let isVector = 1 in {
-
-def RECIP_IEEE_cm : RECIP_IEEE_Common<0x86>;
-
-def MULLO_INT_cm : MULLO_INT_Common<0x8F>;
-def MULHI_INT_cm : MULHI_INT_Common<0x90>;
-def MULLO_UINT_cm : MULLO_UINT_Common<0x91>;
-def MULHI_UINT_cm : MULHI_UINT_Common<0x92>;
-def RECIPSQRT_CLAMPED_cm : RECIPSQRT_CLAMPED_Common<0x87>;
-def EXP_IEEE_cm : EXP_IEEE_Common<0x81>;
-def LOG_IEEE_cm : LOG_IEEE_Common<0x83>;
-def RECIP_CLAMPED_cm : RECIP_CLAMPED_Common<0x84>;
-def RECIPSQRT_IEEE_cm : RECIPSQRT_IEEE_Common<0x89>;
-def SIN_cm : SIN_Common<0x8D>;
-def COS_cm : COS_Common<0x8E>;
-} // End isVector = 1
-
-def : POW_Common <LOG_IEEE_cm, EXP_IEEE_cm, MUL>;
-
-defm DIV_cm : DIV_Common<RECIP_IEEE_cm>;
-
-// RECIP_UINT emulation for Cayman
-// The multiplication scales from [0,1] to the unsigned integer range
-def : Pat <
- (AMDGPUurecip i32:$src0),
- (FLT_TO_UINT_eg (MUL_IEEE (RECIP_IEEE_cm (UINT_TO_FLT_eg $src0)),
- (MOV_IMM_I32 CONST.FP_UINT_MAX_PLUS_1)))
->;
-
- def CF_END_CM : CF_CLAUSE_EG<32, (ins), "CF_END"> {
- let ADDR = 0;
- let POP_COUNT = 0;
- let COUNT = 0;
- }
-
-
-def : Pat<(fsqrt f32:$src), (MUL R600_Reg32:$src, (RECIPSQRT_CLAMPED_cm $src))>;
-
-class RAT_STORE_DWORD <RegisterClass rc, ValueType vt, bits<4> mask> :
- CF_MEM_RAT_CACHELESS <0x14, 0, mask,
- (ins rc:$rw_gpr, R600_TReg32_X:$index_gpr),
- "STORE_DWORD $rw_gpr, $index_gpr",
- [(global_store vt:$rw_gpr, i32:$index_gpr)]> {
- let eop = 0; // This bit is not used on Cayman.
-}
-
-def RAT_STORE_DWORD32 : RAT_STORE_DWORD <R600_TReg32_X, i32, 0x1>;
-def RAT_STORE_DWORD64 : RAT_STORE_DWORD <R600_Reg64, v2i32, 0x3>;
-def RAT_STORE_DWORD128 : RAT_STORE_DWORD <R600_Reg128, v4i32, 0xf>;
-
-class VTX_READ_cm <string name, bits<8> buffer_id, dag outs, list<dag> pattern>
- : VTX_WORD0_cm, VTX_READ<name, buffer_id, outs, pattern> {
-
- // Static fields
- let VC_INST = 0;
- let FETCH_TYPE = 2;
- let FETCH_WHOLE_QUAD = 0;
- let BUFFER_ID = buffer_id;
- let SRC_REL = 0;
- // XXX: We can infer this field based on the SRC_GPR. This would allow us
- // to store vertex addresses in any channel, not just X.
- let SRC_SEL_X = 0;
- let SRC_SEL_Y = 0;
- let STRUCTURED_READ = 0;
- let LDS_REQ = 0;
- let COALESCED_READ = 0;
-
- let Inst{31-0} = Word0;
-}
-
-class VTX_READ_8_cm <bits<8> buffer_id, list<dag> pattern>
- : VTX_READ_cm <"VTX_READ_8 $dst_gpr, $src_gpr", buffer_id,
- (outs R600_TReg32_X:$dst_gpr), pattern> {
-
- let DST_SEL_X = 0;
- let DST_SEL_Y = 7; // Masked
- let DST_SEL_Z = 7; // Masked
- let DST_SEL_W = 7; // Masked
- let DATA_FORMAT = 1; // FMT_8
-}
-
-class VTX_READ_16_cm <bits<8> buffer_id, list<dag> pattern>
- : VTX_READ_cm <"VTX_READ_16 $dst_gpr, $src_gpr", buffer_id,
- (outs R600_TReg32_X:$dst_gpr), pattern> {
- let DST_SEL_X = 0;
- let DST_SEL_Y = 7; // Masked
- let DST_SEL_Z = 7; // Masked
- let DST_SEL_W = 7; // Masked
- let DATA_FORMAT = 5; // FMT_16
-
-}
-
-class VTX_READ_32_cm <bits<8> buffer_id, list<dag> pattern>
- : VTX_READ_cm <"VTX_READ_32 $dst_gpr, $src_gpr", buffer_id,
- (outs R600_TReg32_X:$dst_gpr), pattern> {
-
- let DST_SEL_X = 0;
- let DST_SEL_Y = 7; // Masked
- let DST_SEL_Z = 7; // Masked
- let DST_SEL_W = 7; // Masked
- let DATA_FORMAT = 0xD; // COLOR_32
-
- // This is not really necessary, but there were some GPU hangs that appeared
- // to be caused by ALU instructions in the next instruction group that wrote
- // to the $src_gpr registers of the VTX_READ.
- // e.g.
- // %T3_X<def> = VTX_READ_PARAM_32_eg %T2_X<kill>, 24
- // %T2_X<def> = MOV %ZERO
- //Adding this constraint prevents this from happening.
- let Constraints = "$src_gpr.ptr = $dst_gpr";
-}
-
-class VTX_READ_64_cm <bits<8> buffer_id, list<dag> pattern>
- : VTX_READ_cm <"VTX_READ_64 $dst_gpr, $src_gpr", buffer_id,
- (outs R600_Reg64:$dst_gpr), pattern> {
-
- let DST_SEL_X = 0;
- let DST_SEL_Y = 1;
- let DST_SEL_Z = 7;
- let DST_SEL_W = 7;
- let DATA_FORMAT = 0x1D; // COLOR_32_32
-}
-
-class VTX_READ_128_cm <bits<8> buffer_id, list<dag> pattern>
- : VTX_READ_cm <"VTX_READ_128 $dst_gpr.XYZW, $src_gpr", buffer_id,
- (outs R600_Reg128:$dst_gpr), pattern> {
-
- let DST_SEL_X = 0;
- let DST_SEL_Y = 1;
- let DST_SEL_Z = 2;
- let DST_SEL_W = 3;
- let DATA_FORMAT = 0x22; // COLOR_32_32_32_32
-
- // XXX: Need to force VTX_READ_128 instructions to write to the same register
- // that holds its buffer address to avoid potential hangs. We can't use
- // the same constraint as VTX_READ_32_eg, because the $src_gpr.ptr and $dst
- // registers are different sizes.
-}
-
-//===----------------------------------------------------------------------===//
-// VTX Read from parameter memory space
-//===----------------------------------------------------------------------===//
-def VTX_READ_PARAM_8_cm : VTX_READ_8_cm <0,
- [(set i32:$dst_gpr, (load_param_exti8 ADDRVTX_READ:$src_gpr))]
->;
-
-def VTX_READ_PARAM_16_cm : VTX_READ_16_cm <0,
- [(set i32:$dst_gpr, (load_param_exti16 ADDRVTX_READ:$src_gpr))]
->;
-
-def VTX_READ_PARAM_32_cm : VTX_READ_32_cm <0,
- [(set i32:$dst_gpr, (load_param ADDRVTX_READ:$src_gpr))]
->;
-
-def VTX_READ_PARAM_64_cm : VTX_READ_64_cm <0,
- [(set v2i32:$dst_gpr, (load_param ADDRVTX_READ:$src_gpr))]
->;
-
-def VTX_READ_PARAM_128_cm : VTX_READ_128_cm <0,
- [(set v4i32:$dst_gpr, (load_param ADDRVTX_READ:$src_gpr))]
->;
-
-//===----------------------------------------------------------------------===//
-// VTX Read from global memory space
-//===----------------------------------------------------------------------===//
-
-// 8-bit reads
-def VTX_READ_GLOBAL_8_cm : VTX_READ_8_cm <1,
- [(set i32:$dst_gpr, (az_extloadi8_global ADDRVTX_READ:$src_gpr))]
->;
-
-def VTX_READ_GLOBAL_16_cm : VTX_READ_16_cm <1,
- [(set i32:$dst_gpr, (az_extloadi16_global ADDRVTX_READ:$src_gpr))]
->;
-
-// 32-bit reads
-def VTX_READ_GLOBAL_32_cm : VTX_READ_32_cm <1,
- [(set i32:$dst_gpr, (global_load ADDRVTX_READ:$src_gpr))]
->;
-
-// 64-bit reads
-def VTX_READ_GLOBAL_64_cm : VTX_READ_64_cm <1,
- [(set v2i32:$dst_gpr, (global_load ADDRVTX_READ:$src_gpr))]
->;
-
-// 128-bit reads
-def VTX_READ_GLOBAL_128_cm : VTX_READ_128_cm <1,
- [(set v4i32:$dst_gpr, (global_load ADDRVTX_READ:$src_gpr))]
->;
-
-} // End isCayman
-
-//===----------------------------------------------------------------------===//
-// Branch Instructions
-//===----------------------------------------------------------------------===//
-
-
-def IF_PREDICATE_SET : ILFormat<(outs), (ins GPRI32:$src),
- "IF_PREDICATE_SET $src", []>;
//===----------------------------------------------------------------------===//
// Pseudo instructions
} // End isPseudo = 1
} // End usesCustomInserter = 1
-//===---------------------------------------------------------------------===//
-// Return instruction
-//===---------------------------------------------------------------------===//
-let isTerminator = 1, isReturn = 1, hasCtrlDep = 1,
- usesCustomInserter = 1 in {
- def RETURN : ILFormat<(outs), (ins variable_ops),
- "RETURN", [(IL_retflag)]>;
-}
-
//===----------------------------------------------------------------------===//
// Constant Buffer Addressing Support
let VTXInst = 1;
}
+//===---------------------------------------------------------------------===//
+// Flow and Program control Instructions
+//===---------------------------------------------------------------------===//
+class ILFormat<dag outs, dag ins, string asmstr, list<dag> pattern>
+: Instruction {
+
+ let Namespace = "AMDGPU";
+ dag OutOperandList = outs;
+ dag InOperandList = ins;
+ let Pattern = pattern;
+ let AsmString = !strconcat(asmstr, "\n");
+ let isPseudo = 1;
+ let Itinerary = NullALU;
+ bit hasIEEEFlag = 0;
+ bit hasZeroOpFlag = 0;
+ let mayLoad = 0;
+ let mayStore = 0;
+ let hasSideEffects = 0;
+}
+
+multiclass BranchConditional<SDNode Op, RegisterClass rci, RegisterClass rcf> {
+ def _i32 : ILFormat<(outs),
+ (ins brtarget:$target, rci:$src0),
+ "; i32 Pseudo branch instruction",
+ [(Op bb:$target, (i32 rci:$src0))]>;
+ def _f32 : ILFormat<(outs),
+ (ins brtarget:$target, rcf:$src0),
+ "; f32 Pseudo branch instruction",
+ [(Op bb:$target, (f32 rcf:$src0))]>;
+}
+
+// Only scalar types should generate flow control
+multiclass BranchInstr<string name> {
+ def _i32 : ILFormat<(outs), (ins R600_Reg32:$src),
+ !strconcat(name, " $src"), []>;
+ def _f32 : ILFormat<(outs), (ins R600_Reg32:$src),
+ !strconcat(name, " $src"), []>;
+}
+// Only scalar types should generate flow control
+multiclass BranchInstr2<string name> {
+ def _i32 : ILFormat<(outs), (ins R600_Reg32:$src0, R600_Reg32:$src1),
+ !strconcat(name, " $src0, $src1"), []>;
+ def _f32 : ILFormat<(outs), (ins R600_Reg32:$src0, R600_Reg32:$src1),
+ !strconcat(name, " $src0, $src1"), []>;
+}
-
-//===--------------------------------------------------------------------===//
-// Instructions support
-//===--------------------------------------------------------------------===//
//===---------------------------------------------------------------------===//
// Custom Inserter for Branches and returns, this eventually will be a
-// seperate pass
+// separate pass
//===---------------------------------------------------------------------===//
let isTerminator = 1, usesCustomInserter = 1, isBranch = 1, isBarrier = 1 in {
def BRANCH : ILFormat<(outs), (ins brtarget:$target),
}
//===---------------------------------------------------------------------===//
-// Flow and Program control Instructions
+// Return instruction
//===---------------------------------------------------------------------===//
+let isTerminator = 1, isReturn = 1, hasCtrlDep = 1,
+ usesCustomInserter = 1 in {
+ def RETURN : ILFormat<(outs), (ins variable_ops),
+ "RETURN", [(IL_retflag)]>;
+}
+
+//===----------------------------------------------------------------------===//
+// Branch Instructions
+//===----------------------------------------------------------------------===//
+
+def IF_PREDICATE_SET : ILFormat<(outs), (ins R600_Reg32:$src),
+ "IF_PREDICATE_SET $src", []>;
+
let isTerminator=1 in {
- def SWITCH : ILFormat< (outs), (ins GPRI32:$src),
- !strconcat("SWITCH", " $src"), []>;
- def CASE : ILFormat< (outs), (ins GPRI32:$src),
- !strconcat("CASE", " $src"), []>;
def BREAK : ILFormat< (outs), (ins),
"BREAK", []>;
def CONTINUE : ILFormat< (outs), (ins),
defm CONTINUEC : BranchInstr2<"CONTINUEC">;
}
+//===----------------------------------------------------------------------===//
+// Indirect addressing pseudo instructions
+//===----------------------------------------------------------------------===//
+
+let isPseudo = 1 in {
+
+class ExtractVertical <RegisterClass vec_rc> : InstR600 <
+ (outs R600_Reg32:$dst),
+ (ins vec_rc:$vec, R600_Reg32:$index), "",
+ [],
+ AnyALU
+>;
+
+let Constraints = "$dst = $vec" in {
+
+class InsertVertical <RegisterClass vec_rc> : InstR600 <
+ (outs vec_rc:$dst),
+ (ins vec_rc:$vec, R600_Reg32:$value, R600_Reg32:$index), "",
+ [],
+ AnyALU
+>;
+
+} // End Constraints = "$dst = $vec"
+
+} // End isPseudo = 1
+
+def R600_EXTRACT_ELT_V2 : ExtractVertical <R600_Reg64Vertical>;
+def R600_EXTRACT_ELT_V4 : ExtractVertical <R600_Reg128Vertical>;
+
+def R600_INSERT_ELT_V2 : InsertVertical <R600_Reg64Vertical>;
+def R600_INSERT_ELT_V4 : InsertVertical <R600_Reg128Vertical>;
+
+class ExtractVerticalPat <Instruction inst, ValueType vec_ty,
+ ValueType scalar_ty> : Pat <
+ (scalar_ty (extractelt vec_ty:$vec, i32:$index)),
+ (inst $vec, $index)
+>;
+
+def : ExtractVerticalPat <R600_EXTRACT_ELT_V2, v2i32, i32>;
+def : ExtractVerticalPat <R600_EXTRACT_ELT_V2, v2f32, f32>;
+def : ExtractVerticalPat <R600_EXTRACT_ELT_V4, v4i32, i32>;
+def : ExtractVerticalPat <R600_EXTRACT_ELT_V4, v4f32, f32>;
+
+class InsertVerticalPat <Instruction inst, ValueType vec_ty,
+ ValueType scalar_ty> : Pat <
+ (vec_ty (insertelt vec_ty:$vec, scalar_ty:$value, i32:$index)),
+ (inst $vec, $value, $index)
+>;
+
+def : InsertVerticalPat <R600_INSERT_ELT_V2, v2i32, i32>;
+def : InsertVerticalPat <R600_INSERT_ELT_V2, v2f32, f32>;
+def : InsertVerticalPat <R600_INSERT_ELT_V4, v4i32, i32>;
+def : InsertVerticalPat <R600_INSERT_ELT_V4, v4f32, f32>;
+
//===----------------------------------------------------------------------===//
// ISel Patterns
//===----------------------------------------------------------------------===//
def : Insert_Element <i32, v4i32, 2, sub2>;
def : Insert_Element <i32, v4i32, 3, sub3>;
-def : Vector4_Build <v4f32, f32>;
-def : Vector4_Build <v4i32, i32>;
-
def : Extract_Element <f32, v2f32, 0, sub0>;
def : Extract_Element <f32, v2f32, 1, sub1>;
} // End isR600toCayman Predicate
+let Predicates = [isR600] in {
+// Intrinsic patterns
+defm : Expand24IBitOps<MULLO_INT_r600, ADD_INT>;
+defm : Expand24UBitOps<MULLO_UINT_r600, ADD_INT>;
+} // End isR600
+
def getLDSNoRetOp : InstrMapping {
let FilterClass = "R600_LDS_1A1D";
let RowFields = ["BaseOp"];
projects / oota-llvm.git / blobdiff