#define LLVM_TARGET_POWERPC_PPC32ISELLOWERING_H
#include "PPC.h"
+#include "PPCInstrInfo.h"
+#include "PPCRegisterInfo.h"
#include "PPCSubtarget.h"
#include "llvm/CodeGen/SelectionDAG.h"
#include "llvm/Target/TargetLowering.h"
/// was temporarily in the f64 operand.
FCFID,
+ /// Newer FCFID[US] integer-to-floating-point conversion instructions for
+ /// unsigned integers and single-precision outputs.
+ FCFIDU, FCFIDS, FCFIDUS,
+
/// FCTI[D,W]Z - The FCTIDZ and FCTIWZ instructions, taking an f32 or f64
/// operand, producing an f64 value containing the integer representation
/// of that FP value.
FCTIDZ, FCTIWZ,
- /// STFIWX - The STFIWX instruction. The first operand is an input token
- /// chain, then an f64 value to store, then an address to store it to.
- STFIWX,
+ /// Newer FCTI[D,W]UZ floating-point-to-integer conversion instructions for
+ /// unsigned integers.
+ FCTIDUZ, FCTIWUZ,
+
+ /// Reciprocal estimate instructions (unary FP ops).
+ FRE, FRSQRTE,
// VMADDFP, VNMSUBFP - The VMADDFP and VNMSUBFP instructions, taking
// three v4f32 operands and producing a v4f32 result.
/// code.
SRL, SRA, SHL,
- /// EXTSW_32 - This is the EXTSW instruction for use with "32-bit"
- /// registers.
- EXTSW_32,
-
/// CALL - A direct function call.
- /// CALL_NOP_SVR4 is a call with the special NOP which follows 64-bit
+ /// CALL_NOP is a call with the special NOP which follows 64-bit
/// SVR4 calls.
- CALL_Darwin, CALL_SVR4, CALL_NOP_SVR4,
-
- /// NOP - Special NOP which follows 64-bit SVR4 calls.
- NOP,
+ CALL, CALL_NOP,
/// CHAIN,FLAG = MTCTR(VAL, CHAIN[, INFLAG]) - Directly corresponds to a
/// MTCTR instruction.
/// CHAIN,FLAG = BCTRL(CHAIN, INFLAG) - Directly corresponds to a
/// BCTRL instruction.
- BCTRL_Darwin, BCTRL_SVR4,
+ BCTRL,
/// Return with a flag operand, matched by 'blr'
RET_FLAG,
/// are undefined.
MFCR,
+ // EH_SJLJ_SETJMP - SjLj exception handling setjmp.
+ EH_SJLJ_SETJMP,
+
+ // EH_SJLJ_LONGJMP - SjLj exception handling longjmp.
+ EH_SJLJ_LONGJMP,
+
/// RESVEC = VCMP(LHS, RHS, OPC) - Represents one of the altivec VCMP*
/// instructions. For lack of better number, we use the opcode number
/// encoding for the OPC field to identify the compare. For example, 838
/// an optional input flag argument.
COND_BRANCH,
- // The following 5 instructions are used only as part of the
- // long double-to-int conversion sequence.
-
- /// OUTFLAG = MFFS F8RC - This moves the FPSCR (not modelled) into the
- /// register.
- MFFS,
-
- /// OUTFLAG = MTFSB0 INFLAG - This clears a bit in the FPSCR.
- MTFSB0,
-
- /// OUTFLAG = MTFSB1 INFLAG - This sets a bit in the FPSCR.
- MTFSB1,
-
- /// F8RC, OUTFLAG = FADDRTZ F8RC, F8RC, INFLAG - This is an FADD done with
- /// rounding towards zero. It has flags added so it won't move past the
- /// FPSCR-setting instructions.
+ /// F8RC = FADDRTZ F8RC, F8RC - This is an FADD done with rounding
+ /// towards zero. Used only as part of the long double-to-int
+ /// conversion sequence.
FADDRTZ,
- /// MTFSF = F8RC, INFLAG - This moves the register into the FPSCR.
- MTFSF,
+ /// F8RC = MFFS - This moves the FPSCR (not modeled) into the register.
+ MFFS,
/// LARX = This corresponds to PPC l{w|d}arx instrcution: load and
/// reserve indexed. This is used to implement atomic operations.
CR6SET,
CR6UNSET,
- /// G8RC = LD_GOT_TPREL Symbol, G8RReg - Used by the initial-exec
+ /// G8RC = ADDIS_GOT_TPREL_HA %X2, Symbol - Used by the initial-exec
+ /// TLS model, produces an ADDIS8 instruction that adds the GOT
+ /// base to sym@got@tprel@ha.
+ ADDIS_GOT_TPREL_HA,
+
+ /// G8RC = LD_GOT_TPREL_L Symbol, G8RReg - Used by the initial-exec
/// TLS model, produces a LD instruction with base register G8RReg
- /// and offset sym@got@tprel. The latter identifies the GOT entry
- /// containing the offset of "sym" relative to the thread pointer.
- LD_GOT_TPREL,
+ /// and offset sym@got@tprel@l. This completes the addition that
+ /// finds the offset of "sym" relative to the thread pointer.
+ LD_GOT_TPREL_L,
/// G8RC = ADD_TLS G8RReg, Symbol - Used by the initial-exec TLS
/// model, produces an ADD instruction that adds the contents of
/// TLS sequence.
ADD_TLS,
- /// STD_32 - This is the STD instruction for use with "32-bit" registers.
- STD_32 = ISD::FIRST_TARGET_MEMORY_OPCODE,
+ /// G8RC = ADDIS_TLSGD_HA %X2, Symbol - For the general-dynamic TLS
+ /// model, produces an ADDIS8 instruction that adds the GOT base
+ /// register to sym@got@tlsgd@ha.
+ ADDIS_TLSGD_HA,
+
+ /// G8RC = ADDI_TLSGD_L G8RReg, Symbol - For the general-dynamic TLS
+ /// model, produces an ADDI8 instruction that adds G8RReg to
+ /// sym@got@tlsgd@l.
+ ADDI_TLSGD_L,
+
+ /// G8RC = GET_TLS_ADDR %X3, Symbol - For the general-dynamic TLS
+ /// model, produces a call to __tls_get_addr(sym@tlsgd).
+ GET_TLS_ADDR,
+
+ /// G8RC = ADDIS_TLSLD_HA %X2, Symbol - For the local-dynamic TLS
+ /// model, produces an ADDIS8 instruction that adds the GOT base
+ /// register to sym@got@tlsld@ha.
+ ADDIS_TLSLD_HA,
+
+ /// G8RC = ADDI_TLSLD_L G8RReg, Symbol - For the local-dynamic TLS
+ /// model, produces an ADDI8 instruction that adds G8RReg to
+ /// sym@got@tlsld@l.
+ ADDI_TLSLD_L,
+
+ /// G8RC = GET_TLSLD_ADDR %X3, Symbol - For the local-dynamic TLS
+ /// model, produces a call to __tls_get_addr(sym@tlsld).
+ GET_TLSLD_ADDR,
+
+ /// G8RC = ADDIS_DTPREL_HA %X3, Symbol, Chain - For the
+ /// local-dynamic TLS model, produces an ADDIS8 instruction
+ /// that adds X3 to sym@dtprel@ha. The Chain operand is needed
+ /// to tie this in place following a copy to %X3 from the result
+ /// of a GET_TLSLD_ADDR.
+ ADDIS_DTPREL_HA,
+
+ /// G8RC = ADDI_DTPREL_L G8RReg, Symbol - For the local-dynamic TLS
+ /// model, produces an ADDI8 instruction that adds G8RReg to
+ /// sym@got@dtprel@l.
+ ADDI_DTPREL_L,
+
+ /// VRRC = VADD_SPLAT Elt, EltSize - Temporary node to be expanded
+ /// during instruction selection to optimize a BUILD_VECTOR into
+ /// operations on splats. This is necessary to avoid losing these
+ /// optimizations due to constant folding.
+ VADD_SPLAT,
+
+ /// CHAIN = SC CHAIN, Imm128 - System call. The 7-bit unsigned
+ /// operand identifies the operating system entry point.
+ SC,
/// CHAIN = STBRX CHAIN, GPRC, Ptr, Type - This is a
/// byte-swapping store instruction. It byte-swaps the low "Type" bits of
/// the GPRC input, then stores it through Ptr. Type can be either i16 or
/// i32.
- STBRX,
+ STBRX = ISD::FIRST_TARGET_MEMORY_OPCODE,
/// GPRC, CHAIN = LBRX CHAIN, Ptr, Type - This is a
/// byte-swapping load instruction. It loads "Type" bits, byte swaps it,
/// or i32.
LBRX,
- /// G8RC = ADDIS_TOC_HA %X2, Symbol - For medium code model, produces
- /// an ADDIS8 instruction that adds the TOC base register to sym@toc@ha.
+ /// STFIWX - The STFIWX instruction. The first operand is an input token
+ /// chain, then an f64 value to store, then an address to store it to.
+ STFIWX,
+
+ /// GPRC, CHAIN = LFIWAX CHAIN, Ptr - This is a floating-point
+ /// load which sign-extends from a 32-bit integer value into the
+ /// destination 64-bit register.
+ LFIWAX,
+
+ /// GPRC, CHAIN = LFIWZX CHAIN, Ptr - This is a floating-point
+ /// load which zero-extends from a 32-bit integer value into the
+ /// destination 64-bit register.
+ LFIWZX,
+
+ /// G8RC = ADDIS_TOC_HA %X2, Symbol - For medium and large code model,
+ /// produces an ADDIS8 instruction that adds the TOC base register to
+ /// sym@toc@ha.
ADDIS_TOC_HA,
- /// G8RC = LD_TOC_L Symbol, G8RReg - For medium code model, produces a
- /// LD instruction with base register G8RReg and offset sym@toc@l.
- /// Preceded by an ADDIS_TOC_HA to form a full 32-bit offset.
+ /// G8RC = LD_TOC_L Symbol, G8RReg - For medium and large code model,
+ /// produces a LD instruction with base register G8RReg and offset
+ /// sym@toc@l. Preceded by an ADDIS_TOC_HA to form a full 32-bit offset.
LD_TOC_L,
/// G8RC = ADDI_TOC_L G8RReg, Symbol - For medium code model, produces
class PPCTargetLowering : public TargetLowering {
const PPCSubtarget &PPCSubTarget;
+ const PPCRegisterInfo *PPCRegInfo;
+ const PPCInstrInfo *PPCII;
public:
explicit PPCTargetLowering(PPCTargetMachine &TM);
/// DAG node.
virtual const char *getTargetNodeName(unsigned Opcode) const;
- virtual MVT getShiftAmountTy(EVT LHSTy) const { return MVT::i32; }
+ virtual MVT getScalarShiftAmountTy(EVT LHSTy) const { return MVT::i32; }
/// getSetCCResultType - Return the ISD::SETCC ValueType
virtual EVT getSetCCResultType(EVT VT) const;
MachineBasicBlock *MBB,
bool is8bit, unsigned Opcode) const;
+ MachineBasicBlock *emitEHSjLjSetJmp(MachineInstr *MI,
+ MachineBasicBlock *MBB) const;
+
+ MachineBasicBlock *emitEHSjLjLongJmp(MachineInstr *MI,
+ MachineBasicBlock *MBB) const;
+
ConstraintType getConstraintType(const std::string &Constraint) const;
/// Examine constraint string and operand type and determine a weight value.
/// by AM is legal for this target, for a load/store of the specified type.
virtual bool isLegalAddressingMode(const AddrMode &AM, Type *Ty)const;
- /// isLegalAddressImmediate - Return true if the integer value can be used
- /// as the offset of the target addressing mode for load / store of the
- /// given type.
- virtual bool isLegalAddressImmediate(int64_t V, Type *Ty) const;
-
- /// isLegalAddressImmediate - Return true if the GlobalValue can be used as
- /// the offset of the target addressing mode.
- virtual bool isLegalAddressImmediate(GlobalValue *GV) const;
-
virtual bool isOffsetFoldingLegal(const GlobalAddressSDNode *GA) const;
/// getOptimalMemOpType - Returns the target specific optimal type for load
/// lowering. If DstAlign is zero that means it's safe to destination
/// alignment can satisfy any constraint. Similarly if SrcAlign is zero it
/// means there isn't a need to check it against alignment requirement,
- /// probably because the source does not need to be loaded. If
- /// 'IsZeroVal' is true, that means it's safe to return a
- /// non-scalar-integer type, e.g. empty string source, constant, or loaded
- /// from memory. 'MemcpyStrSrc' indicates whether the memcpy source is
- /// constant so it does not need to be loaded.
+ /// probably because the source does not need to be loaded. If 'IsMemset' is
+ /// true, that means it's expanding a memset. If 'ZeroMemset' is true, that
+ /// means it's a memset of zero. 'MemcpyStrSrc' indicates whether the memcpy
+ /// source is constant so it does not need to be loaded.
/// It returns EVT::Other if the type should be determined using generic
/// target-independent logic.
virtual EVT
getOptimalMemOpType(uint64_t Size, unsigned DstAlign, unsigned SrcAlign,
- bool IsZeroVal, bool MemcpyStrSrc,
+ bool IsMemset, bool ZeroMemset, bool MemcpyStrSrc,
MachineFunction &MF) const;
+ /// Is unaligned memory access allowed for the given type, and is it fast
+ /// relative to software emulation.
+ virtual bool allowsUnalignedMemoryAccesses(EVT VT, bool *Fast = 0) const;
+
/// isFMAFasterThanMulAndAdd - Return true if an FMA operation is faster than
/// a pair of mul and add instructions. fmuladd intrinsics will be expanded to
/// FMAs when this method returns true (and FMAs are legal), otherwise fmuladd
const PPCSubtarget &Subtarget) const;
SDValue LowerSELECT_CC(SDValue Op, SelectionDAG &DAG) const;
SDValue LowerFP_TO_INT(SDValue Op, SelectionDAG &DAG, DebugLoc dl) const;
- SDValue LowerSINT_TO_FP(SDValue Op, SelectionDAG &DAG) const;
+ SDValue LowerINT_TO_FP(SDValue Op, SelectionDAG &DAG) const;
SDValue LowerFLT_ROUNDS_(SDValue Op, SelectionDAG &DAG) const;
SDValue LowerSHL_PARTS(SDValue Op, SelectionDAG &DAG) const;
SDValue LowerSRL_PARTS(SDValue Op, SelectionDAG &DAG) const;
const SmallVectorImpl<ISD::InputArg> &Ins,
DebugLoc dl, SelectionDAG &DAG,
SmallVectorImpl<SDValue> &InVals) const;
+
+ SDValue lowerEH_SJLJ_SETJMP(SDValue Op, SelectionDAG &DAG) const;
+ SDValue lowerEH_SJLJ_LONGJMP(SDValue Op, SelectionDAG &DAG) const;
+
+ SDValue DAGCombineFastRecip(SDValue Op, DAGCombinerInfo &DCI) const;
+ SDValue DAGCombineFastRecipFSQRT(SDValue Op, DAGCombinerInfo &DCI) const;
};
}
projects / oota-llvm.git / blobdiff