//
//===----------------------------------------------------------------------===//
-#define DEBUG_TYPE "mips-isel"
#include "MipsSEISelDAGToDAG.h"
-#include "Mips.h"
#include "MCTargetDesc/MipsBaseInfo.h"
+#include "Mips.h"
#include "MipsAnalyzeImmediate.h"
#include "MipsMachineFunction.h"
#include "MipsRegisterInfo.h"
#include "llvm/CodeGen/MachineInstrBuilder.h"
#include "llvm/CodeGen/MachineRegisterInfo.h"
#include "llvm/CodeGen/SelectionDAGNodes.h"
+#include "llvm/IR/CFG.h"
#include "llvm/IR/GlobalValue.h"
#include "llvm/IR/Instructions.h"
#include "llvm/IR/Intrinsics.h"
#include "llvm/IR/Type.h"
-#include "llvm/Support/CFG.h"
#include "llvm/Support/Debug.h"
#include "llvm/Support/ErrorHandling.h"
#include "llvm/Support/raw_ostream.h"
#include "llvm/Target/TargetMachine.h"
using namespace llvm;
+#define DEBUG_TYPE "mips-isel"
+
+bool MipsSEDAGToDAGISel::runOnMachineFunction(MachineFunction &MF) {
+ Subtarget = &static_cast<const MipsSubtarget &>(MF.getSubtarget());
+ if (Subtarget->inMips16Mode())
+ return false;
+ return MipsDAGToDAGISel::runOnMachineFunction(MF);
+}
+
+void MipsSEDAGToDAGISel::addDSPCtrlRegOperands(bool IsDef, MachineInstr &MI,
+ MachineFunction &MF) {
+ MachineInstrBuilder MIB(MF, &MI);
+ unsigned Mask = MI.getOperand(1).getImm();
+ unsigned Flag = IsDef ? RegState::ImplicitDefine : RegState::Implicit;
+
+ if (Mask & 1)
+ MIB.addReg(Mips::DSPPos, Flag);
+
+ if (Mask & 2)
+ MIB.addReg(Mips::DSPSCount, Flag);
+
+ if (Mask & 4)
+ MIB.addReg(Mips::DSPCarry, Flag);
+
+ if (Mask & 8)
+ MIB.addReg(Mips::DSPOutFlag, Flag);
+
+ if (Mask & 16)
+ MIB.addReg(Mips::DSPCCond, Flag);
+
+ if (Mask & 32)
+ MIB.addReg(Mips::DSPEFI, Flag);
+}
+
+unsigned MipsSEDAGToDAGISel::getMSACtrlReg(const SDValue RegIdx) const {
+ switch (cast<ConstantSDNode>(RegIdx)->getZExtValue()) {
+ default:
+ llvm_unreachable("Could not map int to register");
+ case 0: return Mips::MSAIR;
+ case 1: return Mips::MSACSR;
+ case 2: return Mips::MSAAccess;
+ case 3: return Mips::MSASave;
+ case 4: return Mips::MSAModify;
+ case 5: return Mips::MSARequest;
+ case 6: return Mips::MSAMap;
+ case 7: return Mips::MSAUnmap;
+ }
+}
bool MipsSEDAGToDAGISel::replaceUsesWithZeroReg(MachineRegisterInfo *MRI,
const MachineInstr& MI) {
// Replace uses with ZeroReg.
for (MachineRegisterInfo::use_iterator U = MRI->use_begin(DstReg),
E = MRI->use_end(); U != E;) {
- MachineOperand &MO = U.getOperand();
+ MachineOperand &MO = *U;
unsigned OpNo = U.getOperandNo();
MachineInstr *MI = MO.getParent();
++U;
MachineBasicBlock &MBB = MF.front();
MachineBasicBlock::iterator I = MBB.begin();
MachineRegisterInfo &RegInfo = MF.getRegInfo();
- const TargetInstrInfo &TII = *MF.getTarget().getInstrInfo();
+ const TargetInstrInfo &TII = *Subtarget->getInstrInfo();
DebugLoc DL = I != MBB.end() ? I->getDebugLoc() : DebugLoc();
unsigned V0, V1, GlobalBaseReg = MipsFI->getGlobalBaseReg();
const TargetRegisterClass *RC;
-
- if (Subtarget.isABI_N64())
- RC = (const TargetRegisterClass*)&Mips::CPU64RegsRegClass;
- else
- RC = (const TargetRegisterClass*)&Mips::CPURegsRegClass;
+ const MipsABIInfo &ABI = static_cast<const MipsTargetMachine &>(TM).getABI();
+ RC = (ABI.IsN64()) ? &Mips::GPR64RegClass : &Mips::GPR32RegClass;
V0 = RegInfo.createVirtualRegister(RC);
V1 = RegInfo.createVirtualRegister(RC);
- if (Subtarget.isABI_N64()) {
+ if (ABI.IsN64()) {
MF.getRegInfo().addLiveIn(Mips::T9_64);
MBB.addLiveIn(Mips::T9_64);
MF.getRegInfo().addLiveIn(Mips::T9);
MBB.addLiveIn(Mips::T9);
- if (Subtarget.isABI_N32()) {
+ if (ABI.IsN32()) {
// lui $v0, %hi(%neg(%gp_rel(fname)))
// addu $v1, $v0, $t9
// addiu $globalbasereg, $v1, %lo(%neg(%gp_rel(fname)))
return;
}
- assert(Subtarget.isABI_O32());
+ assert(ABI.IsO32());
// For O32 ABI, the following instruction sequence is emitted to initialize
// the global base register:
for (MachineFunction::iterator MFI = MF.begin(), MFE = MF.end(); MFI != MFE;
++MFI)
- for (MachineBasicBlock::iterator I = MFI->begin(); I != MFI->end(); ++I)
- replaceUsesWithZeroReg(MRI, *I);
-}
-
-/// Select multiply instructions.
-std::pair<SDNode*, SDNode*>
-MipsSEDAGToDAGISel::selectMULT(SDNode *N, unsigned Opc, DebugLoc DL, EVT Ty,
- bool HasLo, bool HasHi) {
- SDNode *Lo = 0, *Hi = 0;
- SDNode *Mul = CurDAG->getMachineNode(Opc, DL, MVT::Glue, N->getOperand(0),
- N->getOperand(1));
- SDValue InFlag = SDValue(Mul, 0);
-
- if (HasLo) {
- unsigned Opcode = (Ty == MVT::i32 ? Mips::MFLO : Mips::MFLO64);
- Lo = CurDAG->getMachineNode(Opcode, DL, Ty, MVT::Glue, InFlag);
- InFlag = SDValue(Lo, 1);
- }
- if (HasHi) {
- unsigned Opcode = (Ty == MVT::i32 ? Mips::MFHI : Mips::MFHI64);
- Hi = CurDAG->getMachineNode(Opcode, DL, Ty, InFlag);
- }
- return std::make_pair(Lo, Hi);
+ for (MachineBasicBlock::iterator I = MFI->begin(); I != MFI->end(); ++I) {
+ if (I->getOpcode() == Mips::RDDSP)
+ addDSPCtrlRegOperands(false, *I, MF);
+ else if (I->getOpcode() == Mips::WRDSP)
+ addDSPCtrlRegOperands(true, *I, MF);
+ else
+ replaceUsesWithZeroReg(MRI, *I);
+ }
}
SDNode *MipsSEDAGToDAGISel::selectAddESubE(unsigned MOp, SDValue InFlag,
- SDValue CmpLHS, DebugLoc DL,
+ SDValue CmpLHS, SDLoc DL,
SDNode *Node) const {
unsigned Opc = InFlag.getOpcode(); (void)Opc;
(Opc == ISD::SUBC || Opc == ISD::SUBE)) &&
"(ADD|SUB)E flag operand must come from (ADD|SUB)C/E insn");
+ unsigned SLTuOp = Mips::SLTu, ADDuOp = Mips::ADDu;
+ if (Subtarget->isGP64bit()) {
+ SLTuOp = Mips::SLTu64;
+ ADDuOp = Mips::DADDu;
+ }
+
SDValue Ops[] = { CmpLHS, InFlag.getOperand(1) };
SDValue LHS = Node->getOperand(0), RHS = Node->getOperand(1);
EVT VT = LHS.getValueType();
- SDNode *Carry = CurDAG->getMachineNode(Mips::SLTu, DL, VT, Ops, 2);
- SDNode *AddCarry = CurDAG->getMachineNode(Mips::ADDu, DL, VT,
- SDValue(Carry, 0), RHS);
+ SDNode *Carry = CurDAG->getMachineNode(SLTuOp, DL, VT, Ops);
+
+ if (Subtarget->isGP64bit()) {
+ // On 64-bit targets, sltu produces an i64 but our backend currently says
+ // that SLTu64 produces an i32. We need to fix this in the long run but for
+ // now, just make the DAG type-correct by asserting the upper bits are zero.
+ Carry = CurDAG->getMachineNode(Mips::SUBREG_TO_REG, DL, VT,
+ CurDAG->getTargetConstant(0, DL, VT),
+ SDValue(Carry, 0),
+ CurDAG->getTargetConstant(Mips::sub_32, DL,
+ VT));
+ }
+
+ // Generate a second addition only if we know that RHS is not a
+ // constant-zero node.
+ SDNode *AddCarry = Carry;
+ ConstantSDNode *C = dyn_cast<ConstantSDNode>(RHS);
+ if (!C || C->getZExtValue())
+ AddCarry = CurDAG->getMachineNode(ADDuOp, DL, VT, SDValue(Carry, 0), RHS);
+
return CurDAG->SelectNodeTo(Node, MOp, VT, MVT::Glue, LHS,
SDValue(AddCarry, 0));
}
+/// Match frameindex
+bool MipsSEDAGToDAGISel::selectAddrFrameIndex(SDValue Addr, SDValue &Base,
+ SDValue &Offset) const {
+ if (FrameIndexSDNode *FIN = dyn_cast<FrameIndexSDNode>(Addr)) {
+ EVT ValTy = Addr.getValueType();
+
+ Base = CurDAG->getTargetFrameIndex(FIN->getIndex(), ValTy);
+ Offset = CurDAG->getTargetConstant(0, SDLoc(Addr), ValTy);
+ return true;
+ }
+ return false;
+}
+
+/// Match frameindex+offset and frameindex|offset
+bool MipsSEDAGToDAGISel::selectAddrFrameIndexOffset(SDValue Addr, SDValue &Base,
+ SDValue &Offset,
+ unsigned OffsetBits) const {
+ if (CurDAG->isBaseWithConstantOffset(Addr)) {
+ ConstantSDNode *CN = dyn_cast<ConstantSDNode>(Addr.getOperand(1));
+ if (isIntN(OffsetBits, CN->getSExtValue())) {
+ EVT ValTy = Addr.getValueType();
+
+ // If the first operand is a FI, get the TargetFI Node
+ if (FrameIndexSDNode *FIN = dyn_cast<FrameIndexSDNode>
+ (Addr.getOperand(0)))
+ Base = CurDAG->getTargetFrameIndex(FIN->getIndex(), ValTy);
+ else
+ Base = Addr.getOperand(0);
+
+ Offset = CurDAG->getTargetConstant(CN->getZExtValue(), SDLoc(Addr),
+ ValTy);
+ return true;
+ }
+ }
+ return false;
+}
+
/// ComplexPattern used on MipsInstrInfo
/// Used on Mips Load/Store instructions
bool MipsSEDAGToDAGISel::selectAddrRegImm(SDValue Addr, SDValue &Base,
SDValue &Offset) const {
- EVT ValTy = Addr.getValueType();
-
// if Address is FI, get the TargetFrameIndex.
- if (FrameIndexSDNode *FIN = dyn_cast<FrameIndexSDNode>(Addr)) {
- Base = CurDAG->getTargetFrameIndex(FIN->getIndex(), ValTy);
- Offset = CurDAG->getTargetConstant(0, ValTy);
+ if (selectAddrFrameIndex(Addr, Base, Offset))
return true;
- }
// on PIC code Load GA
if (Addr.getOpcode() == MipsISD::Wrapper) {
}
// Addresses of the form FI+const or FI|const
- if (CurDAG->isBaseWithConstantOffset(Addr)) {
- ConstantSDNode *CN = dyn_cast<ConstantSDNode>(Addr.getOperand(1));
- if (isInt<16>(CN->getSExtValue())) {
-
- // If the first operand is a FI, get the TargetFI Node
- if (FrameIndexSDNode *FIN = dyn_cast<FrameIndexSDNode>
- (Addr.getOperand(0)))
- Base = CurDAG->getTargetFrameIndex(FIN->getIndex(), ValTy);
- else
- Base = Addr.getOperand(0);
-
- Offset = CurDAG->getTargetConstant(CN->getZExtValue(), ValTy);
- return true;
- }
- }
+ if (selectAddrFrameIndexOffset(Addr, Base, Offset, 16))
+ return true;
// Operand is a result from an ADD.
if (Addr.getOpcode() == ISD::ADD) {
return false;
}
+/// ComplexPattern used on MipsInstrInfo
+/// Used on Mips Load/Store instructions
+bool MipsSEDAGToDAGISel::selectAddrRegReg(SDValue Addr, SDValue &Base,
+ SDValue &Offset) const {
+ // Operand is a result from an ADD.
+ if (Addr.getOpcode() == ISD::ADD) {
+ Base = Addr.getOperand(0);
+ Offset = Addr.getOperand(1);
+ return true;
+ }
+
+ return false;
+}
+
bool MipsSEDAGToDAGISel::selectAddrDefault(SDValue Addr, SDValue &Base,
SDValue &Offset) const {
Base = Addr;
- Offset = CurDAG->getTargetConstant(0, Addr.getValueType());
+ Offset = CurDAG->getTargetConstant(0, SDLoc(Addr), Addr.getValueType());
return true;
}
selectAddrDefault(Addr, Base, Offset);
}
+bool MipsSEDAGToDAGISel::selectAddrRegImm9(SDValue Addr, SDValue &Base,
+ SDValue &Offset) const {
+ if (selectAddrFrameIndex(Addr, Base, Offset))
+ return true;
+
+ if (selectAddrFrameIndexOffset(Addr, Base, Offset, 9))
+ return true;
+
+ return false;
+}
+
+bool MipsSEDAGToDAGISel::selectAddrRegImm10(SDValue Addr, SDValue &Base,
+ SDValue &Offset) const {
+ if (selectAddrFrameIndex(Addr, Base, Offset))
+ return true;
+
+ if (selectAddrFrameIndexOffset(Addr, Base, Offset, 10))
+ return true;
+
+ return false;
+}
+
+/// Used on microMIPS Load/Store unaligned instructions (12-bit offset)
+bool MipsSEDAGToDAGISel::selectAddrRegImm12(SDValue Addr, SDValue &Base,
+ SDValue &Offset) const {
+ if (selectAddrFrameIndex(Addr, Base, Offset))
+ return true;
+
+ if (selectAddrFrameIndexOffset(Addr, Base, Offset, 12))
+ return true;
+
+ return false;
+}
+
+bool MipsSEDAGToDAGISel::selectAddrRegImm16(SDValue Addr, SDValue &Base,
+ SDValue &Offset) const {
+ if (selectAddrFrameIndex(Addr, Base, Offset))
+ return true;
+
+ if (selectAddrFrameIndexOffset(Addr, Base, Offset, 16))
+ return true;
+
+ return false;
+}
+
+bool MipsSEDAGToDAGISel::selectIntAddrMM(SDValue Addr, SDValue &Base,
+ SDValue &Offset) const {
+ return selectAddrRegImm12(Addr, Base, Offset) ||
+ selectAddrDefault(Addr, Base, Offset);
+}
+
+bool MipsSEDAGToDAGISel::selectIntAddrLSL2MM(SDValue Addr, SDValue &Base,
+ SDValue &Offset) const {
+ if (selectAddrFrameIndexOffset(Addr, Base, Offset, 7)) {
+ if (isa<FrameIndexSDNode>(Base))
+ return false;
+
+ if (ConstantSDNode *CN = dyn_cast<ConstantSDNode>(Offset)) {
+ unsigned CnstOff = CN->getZExtValue();
+ return (CnstOff == (CnstOff & 0x3c));
+ }
+
+ return false;
+ }
+
+ // For all other cases where "lw" would be selected, don't select "lw16"
+ // because it would result in additional instructions to prepare operands.
+ if (selectAddrRegImm(Addr, Base, Offset))
+ return false;
+
+ return selectAddrDefault(Addr, Base, Offset);
+}
+
+bool MipsSEDAGToDAGISel::selectIntAddrMSA(SDValue Addr, SDValue &Base,
+ SDValue &Offset) const {
+ if (selectAddrRegImm10(Addr, Base, Offset))
+ return true;
+
+ if (selectAddrDefault(Addr, Base, Offset))
+ return true;
+
+ return false;
+}
+
+// Select constant vector splats.
+//
+// Returns true and sets Imm if:
+// * MSA is enabled
+// * N is a ISD::BUILD_VECTOR representing a constant splat
+bool MipsSEDAGToDAGISel::selectVSplat(SDNode *N, APInt &Imm,
+ unsigned MinSizeInBits) const {
+ if (!Subtarget->hasMSA())
+ return false;
+
+ BuildVectorSDNode *Node = dyn_cast<BuildVectorSDNode>(N);
+
+ if (!Node)
+ return false;
+
+ APInt SplatValue, SplatUndef;
+ unsigned SplatBitSize;
+ bool HasAnyUndefs;
+
+ if (!Node->isConstantSplat(SplatValue, SplatUndef, SplatBitSize, HasAnyUndefs,
+ MinSizeInBits, !Subtarget->isLittle()))
+ return false;
+
+ Imm = SplatValue;
+
+ return true;
+}
+
+// Select constant vector splats.
+//
+// In addition to the requirements of selectVSplat(), this function returns
+// true and sets Imm if:
+// * The splat value is the same width as the elements of the vector
+// * The splat value fits in an integer with the specified signed-ness and
+// width.
+//
+// This function looks through ISD::BITCAST nodes.
+// TODO: This might not be appropriate for big-endian MSA since BITCAST is
+// sometimes a shuffle in big-endian mode.
+//
+// It's worth noting that this function is not used as part of the selection
+// of ldi.[bhwd] since it does not permit using the wrong-typed ldi.[bhwd]
+// instruction to achieve the desired bit pattern. ldi.[bhwd] is selected in
+// MipsSEDAGToDAGISel::selectNode.
+bool MipsSEDAGToDAGISel::
+selectVSplatCommon(SDValue N, SDValue &Imm, bool Signed,
+ unsigned ImmBitSize) const {
+ APInt ImmValue;
+ EVT EltTy = N->getValueType(0).getVectorElementType();
+
+ if (N->getOpcode() == ISD::BITCAST)
+ N = N->getOperand(0);
+
+ if (selectVSplat(N.getNode(), ImmValue, EltTy.getSizeInBits()) &&
+ ImmValue.getBitWidth() == EltTy.getSizeInBits()) {
+
+ if (( Signed && ImmValue.isSignedIntN(ImmBitSize)) ||
+ (!Signed && ImmValue.isIntN(ImmBitSize))) {
+ Imm = CurDAG->getTargetConstant(ImmValue, SDLoc(N), EltTy);
+ return true;
+ }
+ }
+
+ return false;
+}
+
+// Select constant vector splats.
+bool MipsSEDAGToDAGISel::
+selectVSplatUimm1(SDValue N, SDValue &Imm) const {
+ return selectVSplatCommon(N, Imm, false, 1);
+}
+
+bool MipsSEDAGToDAGISel::
+selectVSplatUimm2(SDValue N, SDValue &Imm) const {
+ return selectVSplatCommon(N, Imm, false, 2);
+}
+
+bool MipsSEDAGToDAGISel::
+selectVSplatUimm3(SDValue N, SDValue &Imm) const {
+ return selectVSplatCommon(N, Imm, false, 3);
+}
+
+// Select constant vector splats.
+bool MipsSEDAGToDAGISel::
+selectVSplatUimm4(SDValue N, SDValue &Imm) const {
+ return selectVSplatCommon(N, Imm, false, 4);
+}
+
+// Select constant vector splats.
+bool MipsSEDAGToDAGISel::
+selectVSplatUimm5(SDValue N, SDValue &Imm) const {
+ return selectVSplatCommon(N, Imm, false, 5);
+}
+
+// Select constant vector splats.
+bool MipsSEDAGToDAGISel::
+selectVSplatUimm6(SDValue N, SDValue &Imm) const {
+ return selectVSplatCommon(N, Imm, false, 6);
+}
+
+// Select constant vector splats.
+bool MipsSEDAGToDAGISel::
+selectVSplatUimm8(SDValue N, SDValue &Imm) const {
+ return selectVSplatCommon(N, Imm, false, 8);
+}
+
+// Select constant vector splats.
+bool MipsSEDAGToDAGISel::
+selectVSplatSimm5(SDValue N, SDValue &Imm) const {
+ return selectVSplatCommon(N, Imm, true, 5);
+}
+
+// Select constant vector splats whose value is a power of 2.
+//
+// In addition to the requirements of selectVSplat(), this function returns
+// true and sets Imm if:
+// * The splat value is the same width as the elements of the vector
+// * The splat value is a power of two.
+//
+// This function looks through ISD::BITCAST nodes.
+// TODO: This might not be appropriate for big-endian MSA since BITCAST is
+// sometimes a shuffle in big-endian mode.
+bool MipsSEDAGToDAGISel::selectVSplatUimmPow2(SDValue N, SDValue &Imm) const {
+ APInt ImmValue;
+ EVT EltTy = N->getValueType(0).getVectorElementType();
+
+ if (N->getOpcode() == ISD::BITCAST)
+ N = N->getOperand(0);
+
+ if (selectVSplat(N.getNode(), ImmValue, EltTy.getSizeInBits()) &&
+ ImmValue.getBitWidth() == EltTy.getSizeInBits()) {
+ int32_t Log2 = ImmValue.exactLogBase2();
+
+ if (Log2 != -1) {
+ Imm = CurDAG->getTargetConstant(Log2, SDLoc(N), EltTy);
+ return true;
+ }
+ }
+
+ return false;
+}
+
+// Select constant vector splats whose value only has a consecutive sequence
+// of left-most bits set (e.g. 0b11...1100...00).
+//
+// In addition to the requirements of selectVSplat(), this function returns
+// true and sets Imm if:
+// * The splat value is the same width as the elements of the vector
+// * The splat value is a consecutive sequence of left-most bits.
+//
+// This function looks through ISD::BITCAST nodes.
+// TODO: This might not be appropriate for big-endian MSA since BITCAST is
+// sometimes a shuffle in big-endian mode.
+bool MipsSEDAGToDAGISel::selectVSplatMaskL(SDValue N, SDValue &Imm) const {
+ APInt ImmValue;
+ EVT EltTy = N->getValueType(0).getVectorElementType();
+
+ if (N->getOpcode() == ISD::BITCAST)
+ N = N->getOperand(0);
+
+ if (selectVSplat(N.getNode(), ImmValue, EltTy.getSizeInBits()) &&
+ ImmValue.getBitWidth() == EltTy.getSizeInBits()) {
+ // Extract the run of set bits starting with bit zero from the bitwise
+ // inverse of ImmValue, and test that the inverse of this is the same
+ // as the original value.
+ if (ImmValue == ~(~ImmValue & ~(~ImmValue + 1))) {
+
+ Imm = CurDAG->getTargetConstant(ImmValue.countPopulation(), SDLoc(N),
+ EltTy);
+ return true;
+ }
+ }
+
+ return false;
+}
+
+// Select constant vector splats whose value only has a consecutive sequence
+// of right-most bits set (e.g. 0b00...0011...11).
+//
+// In addition to the requirements of selectVSplat(), this function returns
+// true and sets Imm if:
+// * The splat value is the same width as the elements of the vector
+// * The splat value is a consecutive sequence of right-most bits.
+//
+// This function looks through ISD::BITCAST nodes.
+// TODO: This might not be appropriate for big-endian MSA since BITCAST is
+// sometimes a shuffle in big-endian mode.
+bool MipsSEDAGToDAGISel::selectVSplatMaskR(SDValue N, SDValue &Imm) const {
+ APInt ImmValue;
+ EVT EltTy = N->getValueType(0).getVectorElementType();
+
+ if (N->getOpcode() == ISD::BITCAST)
+ N = N->getOperand(0);
+
+ if (selectVSplat(N.getNode(), ImmValue, EltTy.getSizeInBits()) &&
+ ImmValue.getBitWidth() == EltTy.getSizeInBits()) {
+ // Extract the run of set bits starting with bit zero, and test that the
+ // result is the same as the original value
+ if (ImmValue == (ImmValue & ~(ImmValue + 1))) {
+ Imm = CurDAG->getTargetConstant(ImmValue.countPopulation(), SDLoc(N),
+ EltTy);
+ return true;
+ }
+ }
+
+ return false;
+}
+
+bool MipsSEDAGToDAGISel::selectVSplatUimmInvPow2(SDValue N,
+ SDValue &Imm) const {
+ APInt ImmValue;
+ EVT EltTy = N->getValueType(0).getVectorElementType();
+
+ if (N->getOpcode() == ISD::BITCAST)
+ N = N->getOperand(0);
+
+ if (selectVSplat(N.getNode(), ImmValue, EltTy.getSizeInBits()) &&
+ ImmValue.getBitWidth() == EltTy.getSizeInBits()) {
+ int32_t Log2 = (~ImmValue).exactLogBase2();
+
+ if (Log2 != -1) {
+ Imm = CurDAG->getTargetConstant(Log2, SDLoc(N), EltTy);
+ return true;
+ }
+ }
+
+ return false;
+}
+
std::pair<bool, SDNode*> MipsSEDAGToDAGISel::selectNode(SDNode *Node) {
unsigned Opcode = Node->getOpcode();
- DebugLoc DL = Node->getDebugLoc();
+ SDLoc DL(Node);
///
// Instruction Selection not handled by the auto-generated
// tablegen selection should be handled here.
///
- EVT NodeTy = Node->getValueType(0);
SDNode *Result;
- unsigned MultOpc;
switch(Opcode) {
default: break;
case ISD::SUBE: {
SDValue InFlag = Node->getOperand(2);
- Result = selectAddESubE(Mips::SUBu, InFlag, InFlag.getOperand(0), DL, Node);
+ unsigned Opc = Subtarget->isGP64bit() ? Mips::DSUBu : Mips::SUBu;
+ Result = selectAddESubE(Opc, InFlag, InFlag.getOperand(0), DL, Node);
return std::make_pair(true, Result);
}
case ISD::ADDE: {
- SDValue InFlag = Node->getOperand(2);
- Result = selectAddESubE(Mips::ADDu, InFlag, InFlag.getValue(0), DL, Node);
- return std::make_pair(true, Result);
- }
-
- /// Mul with two results
- case ISD::SMUL_LOHI:
- case ISD::UMUL_LOHI: {
- if (NodeTy == MVT::i32)
- MultOpc = (Opcode == ISD::UMUL_LOHI ? Mips::MULTu : Mips::MULT);
- else
- MultOpc = (Opcode == ISD::UMUL_LOHI ? Mips::DMULTu : Mips::DMULT);
-
- std::pair<SDNode*, SDNode*> LoHi = selectMULT(Node, MultOpc, DL, NodeTy,
- true, true);
-
- if (!SDValue(Node, 0).use_empty())
- ReplaceUses(SDValue(Node, 0), SDValue(LoHi.first, 0));
-
- if (!SDValue(Node, 1).use_empty())
- ReplaceUses(SDValue(Node, 1), SDValue(LoHi.second, 0));
-
- return std::make_pair(true, (SDNode*)NULL);
- }
-
- /// Special Muls
- case ISD::MUL: {
- // Mips32 has a 32-bit three operand mul instruction.
- if (Subtarget.hasMips32() && NodeTy == MVT::i32)
+ if (Subtarget->hasDSP()) // Select DSP instructions, ADDSC and ADDWC.
break;
- MultOpc = NodeTy == MVT::i32 ? Mips::MULT : Mips::DMULT;
- Result = selectMULT(Node, MultOpc, DL, NodeTy, true, false).first;
- return std::make_pair(true, Result);
- }
- case ISD::MULHS:
- case ISD::MULHU: {
- if (NodeTy == MVT::i32)
- MultOpc = (Opcode == ISD::MULHU ? Mips::MULTu : Mips::MULT);
- else
- MultOpc = (Opcode == ISD::MULHU ? Mips::DMULTu : Mips::DMULT);
-
- Result = selectMULT(Node, MultOpc, DL, NodeTy, false, true).second;
+ SDValue InFlag = Node->getOperand(2);
+ unsigned Opc = Subtarget->isGP64bit() ? Mips::DADDu : Mips::ADDu;
+ Result = selectAddESubE(Opc, InFlag, InFlag.getValue(0), DL, Node);
return std::make_pair(true, Result);
}
case ISD::ConstantFP: {
ConstantFPSDNode *CN = dyn_cast<ConstantFPSDNode>(Node);
if (Node->getValueType(0) == MVT::f64 && CN->isExactlyValue(+0.0)) {
- if (Subtarget.hasMips64()) {
+ if (Subtarget->isGP64bit()) {
SDValue Zero = CurDAG->getCopyFromReg(CurDAG->getEntryNode(), DL,
Mips::ZERO_64, MVT::i64);
Result = CurDAG->getMachineNode(Mips::DMTC1, DL, MVT::f64, Zero);
+ } else if (Subtarget->isFP64bit()) {
+ SDValue Zero = CurDAG->getCopyFromReg(CurDAG->getEntryNode(), DL,
+ Mips::ZERO, MVT::i32);
+ Result = CurDAG->getMachineNode(Mips::BuildPairF64_64, DL, MVT::f64,
+ Zero, Zero);
} else {
SDValue Zero = CurDAG->getCopyFromReg(CurDAG->getEntryNode(), DL,
Mips::ZERO, MVT::i32);
AnalyzeImm.Analyze(Imm, Size, false);
MipsAnalyzeImmediate::InstSeq::const_iterator Inst = Seq.begin();
- DebugLoc DL = CN->getDebugLoc();
+ SDLoc DL(CN);
SDNode *RegOpnd;
SDValue ImmOpnd = CurDAG->getTargetConstant(SignExtend64<16>(Inst->ImmOpnd),
- MVT::i64);
+ DL, MVT::i64);
// The first instruction can be a LUi which is different from other
// instructions (ADDiu, ORI and SLL) in that it does not have a register
// The remaining instructions in the sequence are handled here.
for (++Inst; Inst != Seq.end(); ++Inst) {
- ImmOpnd = CurDAG->getTargetConstant(SignExtend64<16>(Inst->ImmOpnd),
+ ImmOpnd = CurDAG->getTargetConstant(SignExtend64<16>(Inst->ImmOpnd), DL,
MVT::i64);
RegOpnd = CurDAG->getMachineNode(Inst->Opc, DL, MVT::i64,
SDValue(RegOpnd, 0), ImmOpnd);
return std::make_pair(true, RegOpnd);
}
+ case ISD::INTRINSIC_W_CHAIN: {
+ switch (cast<ConstantSDNode>(Node->getOperand(1))->getZExtValue()) {
+ default:
+ break;
+
+ case Intrinsic::mips_cfcmsa: {
+ SDValue ChainIn = Node->getOperand(0);
+ SDValue RegIdx = Node->getOperand(2);
+ SDValue Reg = CurDAG->getCopyFromReg(ChainIn, DL,
+ getMSACtrlReg(RegIdx), MVT::i32);
+ return std::make_pair(true, Reg.getNode());
+ }
+ }
+ break;
+ }
+
+ case ISD::INTRINSIC_WO_CHAIN: {
+ switch (cast<ConstantSDNode>(Node->getOperand(0))->getZExtValue()) {
+ default:
+ break;
+
+ case Intrinsic::mips_move_v:
+ // Like an assignment but will always produce a move.v even if
+ // unnecessary.
+ return std::make_pair(true,
+ CurDAG->getMachineNode(Mips::MOVE_V, DL,
+ Node->getValueType(0),
+ Node->getOperand(1)));
+ }
+ break;
+ }
+
+ case ISD::INTRINSIC_VOID: {
+ switch (cast<ConstantSDNode>(Node->getOperand(1))->getZExtValue()) {
+ default:
+ break;
+
+ case Intrinsic::mips_ctcmsa: {
+ SDValue ChainIn = Node->getOperand(0);
+ SDValue RegIdx = Node->getOperand(2);
+ SDValue Value = Node->getOperand(3);
+ SDValue ChainOut = CurDAG->getCopyToReg(ChainIn, DL,
+ getMSACtrlReg(RegIdx), Value);
+ return std::make_pair(true, ChainOut.getNode());
+ }
+ }
+ break;
+ }
+
case MipsISD::ThreadPointer: {
- EVT PtrVT = TLI.getPointerTy();
- unsigned RdhwrOpc, SrcReg, DestReg;
+ EVT PtrVT = getTargetLowering()->getPointerTy();
+ unsigned RdhwrOpc, DestReg;
if (PtrVT == MVT::i32) {
RdhwrOpc = Mips::RDHWR;
- SrcReg = Mips::HWR29;
DestReg = Mips::V1;
} else {
RdhwrOpc = Mips::RDHWR64;
- SrcReg = Mips::HWR29_64;
DestReg = Mips::V1_64;
}
SDNode *Rdhwr =
- CurDAG->getMachineNode(RdhwrOpc, Node->getDebugLoc(),
+ CurDAG->getMachineNode(RdhwrOpc, DL,
Node->getValueType(0),
- CurDAG->getRegister(SrcReg, PtrVT));
+ CurDAG->getRegister(Mips::HWR29, MVT::i32));
SDValue Chain = CurDAG->getCopyToReg(CurDAG->getEntryNode(), DL, DestReg,
SDValue(Rdhwr, 0));
SDValue ResNode = CurDAG->getCopyFromReg(Chain, DL, DestReg, PtrVT);
ReplaceUses(SDValue(Node, 0), ResNode);
return std::make_pair(true, ResNode.getNode());
}
+
+ case ISD::BUILD_VECTOR: {
+ // Select appropriate ldi.[bhwd] instructions for constant splats of
+ // 128-bit when MSA is enabled. Fixup any register class mismatches that
+ // occur as a result.
+ //
+ // This allows the compiler to use a wider range of immediates than would
+ // otherwise be allowed. If, for example, v4i32 could only use ldi.h then
+ // it would not be possible to load { 0x01010101, 0x01010101, 0x01010101,
+ // 0x01010101 } without using a constant pool. This would be sub-optimal
+ // when // 'ldi.b wd, 1' is capable of producing that bit-pattern in the
+ // same set/ of registers. Similarly, ldi.h isn't capable of producing {
+ // 0x00000000, 0x00000001, 0x00000000, 0x00000001 } but 'ldi.d wd, 1' can.
+
+ BuildVectorSDNode *BVN = cast<BuildVectorSDNode>(Node);
+ APInt SplatValue, SplatUndef;
+ unsigned SplatBitSize;
+ bool HasAnyUndefs;
+ unsigned LdiOp;
+ EVT ResVecTy = BVN->getValueType(0);
+ EVT ViaVecTy;
+
+ if (!Subtarget->hasMSA() || !BVN->getValueType(0).is128BitVector())
+ return std::make_pair(false, nullptr);
+
+ if (!BVN->isConstantSplat(SplatValue, SplatUndef, SplatBitSize,
+ HasAnyUndefs, 8,
+ !Subtarget->isLittle()))
+ return std::make_pair(false, nullptr);
+
+ switch (SplatBitSize) {
+ default:
+ return std::make_pair(false, nullptr);
+ case 8:
+ LdiOp = Mips::LDI_B;
+ ViaVecTy = MVT::v16i8;
+ break;
+ case 16:
+ LdiOp = Mips::LDI_H;
+ ViaVecTy = MVT::v8i16;
+ break;
+ case 32:
+ LdiOp = Mips::LDI_W;
+ ViaVecTy = MVT::v4i32;
+ break;
+ case 64:
+ LdiOp = Mips::LDI_D;
+ ViaVecTy = MVT::v2i64;
+ break;
+ }
+
+ if (!SplatValue.isSignedIntN(10))
+ return std::make_pair(false, nullptr);
+
+ SDValue Imm = CurDAG->getTargetConstant(SplatValue, DL,
+ ViaVecTy.getVectorElementType());
+
+ SDNode *Res = CurDAG->getMachineNode(LdiOp, DL, ViaVecTy, Imm);
+
+ if (ResVecTy != ViaVecTy) {
+ // If LdiOp is writing to a different register class to ResVecTy, then
+ // fix it up here. This COPY_TO_REGCLASS should never cause a move.v
+ // since the source and destination register sets contain the same
+ // registers.
+ const TargetLowering *TLI = getTargetLowering();
+ MVT ResVecTySimple = ResVecTy.getSimpleVT();
+ const TargetRegisterClass *RC = TLI->getRegClassFor(ResVecTySimple);
+ Res = CurDAG->getMachineNode(Mips::COPY_TO_REGCLASS, DL,
+ ResVecTy, SDValue(Res, 0),
+ CurDAG->getTargetConstant(RC->getID(), DL,
+ MVT::i32));
+ }
+
+ return std::make_pair(true, Res);
+ }
+
}
- return std::make_pair(false, (SDNode*)NULL);
+ return std::make_pair(false, nullptr);
+}
+
+bool MipsSEDAGToDAGISel::
+SelectInlineAsmMemoryOperand(const SDValue &Op, unsigned ConstraintID,
+ std::vector<SDValue> &OutOps) {
+ SDValue Base, Offset;
+
+ switch(ConstraintID) {
+ default:
+ llvm_unreachable("Unexpected asm memory constraint");
+ // All memory constraints can at least accept raw pointers.
+ case InlineAsm::Constraint_i:
+ OutOps.push_back(Op);
+ OutOps.push_back(CurDAG->getTargetConstant(0, SDLoc(Op), MVT::i32));
+ return false;
+ case InlineAsm::Constraint_m:
+ if (selectAddrRegImm16(Op, Base, Offset)) {
+ OutOps.push_back(Base);
+ OutOps.push_back(Offset);
+ return false;
+ }
+ OutOps.push_back(Op);
+ OutOps.push_back(CurDAG->getTargetConstant(0, SDLoc(Op), MVT::i32));
+ return false;
+ case InlineAsm::Constraint_R:
+ // The 'R' constraint is supposed to be much more complicated than this.
+ // However, it's becoming less useful due to architectural changes and
+ // ought to be replaced by other constraints such as 'ZC'.
+ // For now, support 9-bit signed offsets which is supportable by all
+ // subtargets for all instructions.
+ if (selectAddrRegImm9(Op, Base, Offset)) {
+ OutOps.push_back(Base);
+ OutOps.push_back(Offset);
+ return false;
+ }
+ OutOps.push_back(Op);
+ OutOps.push_back(CurDAG->getTargetConstant(0, SDLoc(Op), MVT::i32));
+ return false;
+ case InlineAsm::Constraint_ZC:
+ // ZC matches whatever the pref, ll, and sc instructions can handle for the
+ // given subtarget.
+ if (Subtarget->inMicroMipsMode()) {
+ // On microMIPS, they can handle 12-bit offsets.
+ if (selectAddrRegImm12(Op, Base, Offset)) {
+ OutOps.push_back(Base);
+ OutOps.push_back(Offset);
+ return false;
+ }
+ } else if (Subtarget->hasMips32r6()) {
+ // On MIPS32r6/MIPS64r6, they can only handle 9-bit offsets.
+ if (selectAddrRegImm9(Op, Base, Offset)) {
+ OutOps.push_back(Base);
+ OutOps.push_back(Offset);
+ return false;
+ }
+ } else if (selectAddrRegImm16(Op, Base, Offset)) {
+ // Prior to MIPS32r6/MIPS64r6, they can handle 16-bit offsets.
+ OutOps.push_back(Base);
+ OutOps.push_back(Offset);
+ return false;
+ }
+ // In all cases, 0-bit offsets are acceptable.
+ OutOps.push_back(Op);
+ OutOps.push_back(CurDAG->getTargetConstant(0, SDLoc(Op), MVT::i32));
+ return false;
+ }
+ return true;
}
FunctionPass *llvm::createMipsSEISelDag(MipsTargetMachine &TM) {