return false;
}
+/// ComplexPattern used on MipsInstrInfo
+/// Used on Mips Load/Store instructions
+bool MipsSEDAGToDAGISel::selectAddrRegReg(SDValue Addr, SDValue &Base,
+ SDValue &Offset) const {
+ // Operand is a result from an ADD.
+ if (Addr.getOpcode() == ISD::ADD) {
+ Base = Addr.getOperand(0);
+ Offset = Addr.getOperand(1);
+ return true;
+ }
+
+ return false;
+}
+
bool MipsSEDAGToDAGISel::selectAddrDefault(SDValue Addr, SDValue &Base,
SDValue &Offset) const {
Base = Addr;
ConstantSDNode *CN = dyn_cast<ConstantSDNode>(Addr.getOperand(1));
if (isInt<12>(CN->getSExtValue())) {
- // If the first operand is a FI, get the TargetFI Node
+ // If the first operand is a FI then get the TargetFI Node
if (FrameIndexSDNode *FIN = dyn_cast<FrameIndexSDNode>
(Addr.getOperand(0)))
Base = CurDAG->getTargetFrameIndex(FIN->getIndex(), ValTy);
selectAddrDefault(Addr, Base, Offset);
}
+// Select constant vector splats.
+//
+// Returns true and sets Imm if:
+// * MSA is enabled
+// * N is a ISD::BUILD_VECTOR representing a constant splat
+// * The splat value fits in a signed 32-bit value.
+//
+// That last requirement isn't strictly a requirement of the instruction set
+// but it simplifies the callers by allowing them to assume they don't have to
+// handle 64-bit values. The callers will also be placing stricter requirements
+// on the immediates so this doesn't prohibit selection of legal immediates.
+bool MipsSEDAGToDAGISel::selectVSplat(SDNode *N, APInt &Imm) const {
+ if (!Subtarget.hasMSA())
+ return false;
+
+ BuildVectorSDNode *Node = dyn_cast<BuildVectorSDNode>(N);
+
+ if (Node == NULL)
+ return false;
+
+ APInt SplatValue, SplatUndef;
+ unsigned SplatBitSize;
+ bool HasAnyUndefs;
+
+ if (!Node->isConstantSplat(SplatValue, SplatUndef, SplatBitSize,
+ HasAnyUndefs, 8,
+ !Subtarget.isLittle()))
+ return false;
+
+ // None of the immediate forms can handle more than 32 bits
+ if (!SplatValue.isIntN(32))
+ return false;
+
+ Imm = SplatValue;
+
+ return true;
+}
+
+// Select constant vector splats.
+//
+// In addition to the requirements of selectVSplat(), this function returns
+// true and sets Imm if:
+// * The splat value is the same width as the elements of the vector
+// * The splat value fits in an integer with the specified signed-ness and
+// width.
+//
+// This function looks through ISD::BITCAST nodes.
+// TODO: This might not be appropriate for big-endian MSA since BITCAST is
+// sometimes a shuffle in big-endian mode.
+//
+// It's worth noting that this function is not used as part of the selection
+// of ldi.[bhwd] since it does not permit using the wrong-typed ldi.[bhwd]
+// instruction to achieve the desired bit pattern. ldi.[bhwd] is selected in
+// MipsSEDAGToDAGISel::selectNode.
+bool MipsSEDAGToDAGISel::
+selectVSplatCommon(SDValue N, SDValue &Imm, bool Signed,
+ unsigned ImmBitSize) const {
+ APInt ImmValue;
+ EVT EltTy = N->getValueType(0).getVectorElementType();
+
+ if (N->getOpcode() == ISD::BITCAST)
+ N = N->getOperand(0);
+
+ if (selectVSplat (N.getNode(), ImmValue) &&
+ ImmValue.getBitWidth() == EltTy.getSizeInBits()) {
+ if (( Signed && ImmValue.isSignedIntN(ImmBitSize)) ||
+ (!Signed && ImmValue.isIntN(ImmBitSize))) {
+ Imm = CurDAG->getTargetConstant(ImmValue, EltTy);
+ return true;
+ }
+ }
+
+ return false;
+}
+
+// Select constant vector splats.
+bool MipsSEDAGToDAGISel::
+selectVSplatUimm1(SDValue N, SDValue &Imm) const {
+ return selectVSplatCommon(N, Imm, false, 1);
+}
+
+bool MipsSEDAGToDAGISel::
+selectVSplatUimm2(SDValue N, SDValue &Imm) const {
+ return selectVSplatCommon(N, Imm, false, 2);
+}
+
+bool MipsSEDAGToDAGISel::
+selectVSplatUimm3(SDValue N, SDValue &Imm) const {
+ return selectVSplatCommon(N, Imm, false, 3);
+}
+
+// Select constant vector splats.
+bool MipsSEDAGToDAGISel::
+selectVSplatUimm4(SDValue N, SDValue &Imm) const {
+ return selectVSplatCommon(N, Imm, false, 4);
+}
+
+// Select constant vector splats.
+bool MipsSEDAGToDAGISel::
+selectVSplatUimm5(SDValue N, SDValue &Imm) const {
+ return selectVSplatCommon(N, Imm, false, 5);
+}
+
+// Select constant vector splats.
+bool MipsSEDAGToDAGISel::
+selectVSplatUimm6(SDValue N, SDValue &Imm) const {
+ return selectVSplatCommon(N, Imm, false, 6);
+}
+
+// Select constant vector splats.
+bool MipsSEDAGToDAGISel::
+selectVSplatUimm8(SDValue N, SDValue &Imm) const {
+ return selectVSplatCommon(N, Imm, false, 8);
+}
+
+// Select constant vector splats.
+bool MipsSEDAGToDAGISel::
+selectVSplatSimm5(SDValue N, SDValue &Imm) const {
+ return selectVSplatCommon(N, Imm, true, 5);
+}
+
+// Select constant vector splats whose value is a power of 2.
+//
+// In addition to the requirements of selectVSplat(), this function returns
+// true and sets Imm if:
+// * The splat value is the same width as the elements of the vector
+// * The splat value is a power of two.
+//
+// This function looks through ISD::BITCAST nodes.
+// TODO: This might not be appropriate for big-endian MSA since BITCAST is
+// sometimes a shuffle in big-endian mode.
+bool MipsSEDAGToDAGISel::selectVSplatUimmPow2(SDValue N, SDValue &Imm) const {
+ APInt ImmValue;
+ EVT EltTy = N->getValueType(0).getVectorElementType();
+
+ if (N->getOpcode() == ISD::BITCAST)
+ N = N->getOperand(0);
+
+ if (selectVSplat (N.getNode(), ImmValue) &&
+ ImmValue.getBitWidth() == EltTy.getSizeInBits()) {
+ int32_t Log2 = ImmValue.exactLogBase2();
+
+ if (Log2 != -1) {
+ Imm = CurDAG->getTargetConstant(Log2, EltTy);
+ return true;
+ }
+ }
+
+ return false;
+}
+
std::pair<bool, SDNode*> MipsSEDAGToDAGISel::selectNode(SDNode *Node) {
unsigned Opcode = Node->getOpcode();
SDLoc DL(Node);
break;
}
+ case ISD::INTRINSIC_WO_CHAIN: {
+ switch (cast<ConstantSDNode>(Node->getOperand(0))->getZExtValue()) {
+ default:
+ break;
+
+ case Intrinsic::mips_move_v:
+ // Like an assignment but will always produce a move.v even if
+ // unnecessary.
+ return std::make_pair(true,
+ CurDAG->getMachineNode(Mips::MOVE_V, DL,
+ Node->getValueType(0),
+ Node->getOperand(1)));
+ }
+ break;
+ }
+
case ISD::INTRINSIC_VOID: {
switch (cast<ConstantSDNode>(Node->getOperand(1))->getZExtValue()) {
default:
MVT::Untyped, Ops);
return std::make_pair(true, Res);
}
+
+ case ISD::BUILD_VECTOR: {
+ // Select appropriate ldi.[bhwd] instructions for constant splats of
+ // 128-bit when MSA is enabled. Fixup any register class mismatches that
+ // occur as a result.
+ //
+ // This allows the compiler to use a wider range of immediates than would
+ // otherwise be allowed. If, for example, v4i32 could only use ldi.h then
+ // it would not be possible to load { 0x01010101, 0x01010101, 0x01010101,
+ // 0x01010101 } without using a constant pool. This would be sub-optimal
+ // when // 'ldi.b wd, 1' is capable of producing that bit-pattern in the
+ // same set/ of registers. Similarly, ldi.h isn't capable of producing {
+ // 0x00000000, 0x00000001, 0x00000000, 0x00000001 } but 'ldi.d wd, 1' can.
+
+ BuildVectorSDNode *BVN = cast<BuildVectorSDNode>(Node);
+ APInt SplatValue, SplatUndef;
+ unsigned SplatBitSize;
+ bool HasAnyUndefs;
+ unsigned LdiOp;
+ EVT ResVecTy = BVN->getValueType(0);
+ EVT ViaVecTy;
+
+ if (!Subtarget.hasMSA() || !BVN->getValueType(0).is128BitVector())
+ return std::make_pair(false, (SDNode*)NULL);
+
+ if (!BVN->isConstantSplat(SplatValue, SplatUndef, SplatBitSize,
+ HasAnyUndefs, 8,
+ !Subtarget.isLittle()))
+ return std::make_pair(false, (SDNode*)NULL);
+
+ switch (SplatBitSize) {
+ default:
+ return std::make_pair(false, (SDNode*)NULL);
+ case 8:
+ LdiOp = Mips::LDI_B;
+ ViaVecTy = MVT::v16i8;
+ break;
+ case 16:
+ LdiOp = Mips::LDI_H;
+ ViaVecTy = MVT::v8i16;
+ break;
+ case 32:
+ LdiOp = Mips::LDI_W;
+ ViaVecTy = MVT::v4i32;
+ break;
+ case 64:
+ LdiOp = Mips::LDI_D;
+ ViaVecTy = MVT::v2i64;
+ break;
+ }
+
+ if (!SplatValue.isSignedIntN(10))
+ return std::make_pair(false, (SDNode*)NULL);
+
+ SDValue Imm = CurDAG->getTargetConstant(SplatValue,
+ ViaVecTy.getVectorElementType());
+
+ SDNode *Res = CurDAG->getMachineNode(LdiOp, SDLoc(Node), ViaVecTy, Imm);
+
+ if (ResVecTy != ViaVecTy) {
+ // If LdiOp is writing to a different register class to ResVecTy, then
+ // fix it up here. This COPY_TO_REGCLASS should never cause a move.v
+ // since the source and destination register sets contain the same
+ // registers.
+ const TargetLowering *TLI = getTargetLowering();
+ MVT ResVecTySimple = ResVecTy.getSimpleVT();
+ const TargetRegisterClass *RC = TLI->getRegClassFor(ResVecTySimple);
+ Res = CurDAG->getMachineNode(Mips::COPY_TO_REGCLASS, SDLoc(Node),
+ ResVecTy, SDValue(Res, 0),
+ CurDAG->getTargetConstant(RC->getID(),
+ MVT::i32));
+ }
+
+ return std::make_pair(true, Res);
+ }
+
}
return std::make_pair(false, (SDNode*)NULL);
projects / oota-llvm.git / blobdiff